Java preferences window doesn't show the tabs after jdk 7 update 7 installations
java preferences window doen't show the tabs after jdk 7 update 7 installations, before the installations of jdk 7 u7 the tabs in the java preferences window were visible
Then, dump Chrome or uninstall Java 7u7 and connect back tol Java SE 6:
Q: Can I restore Apple Java 6 after uninstalling Oracle Java 7?
A: Go back to Apple Java 6 using the following instructions:
Uninstall Oracle Java 7 by deleting the plug-in file. From a Terminal window enter:
sudo rm -rf /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
Create a symlink using the following command, entered on a single line:
sudo ln -s /System/Library/Java/Support/CoreDeploy.bundle/Contents/JavaAppletPlugin.plugin /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
Similar Messages
-
IPod Preference Window Doesn't Show in iTunes
My computer recognizes my iPod but the preference window does not show up so I can't add new playlists or make changes. It syncs but I need that preference window. How do I get it back? I had to do an archive and restore last week...would that affect it?
Thanks.If Windows recognised it, there is a good chance of recovery, by using Chkdsk
go to DOS and type in
chkdsk drive: /F
where drive: is the iPod drive ID either D: or E:
The above operation will try to fix any iPod filesystem error.
Then iTunes will pop up, or you may have to Reset iPod while still connected to the PC.
Antivirus has a tendency to freeze Itunes sync Operation with Ipod Classic, causing a timeout, which corrupt your Ipod filesystem, so when iTunes cant read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes, (back to the pre-Apple II days).
My suggestion.
Connect your Ipod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
Stop the Antivirus program
Connect your Ipod to the PC
When Itunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
When Restore complete, eject the iPod and reconnect again.
Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well, since you got such a huge library.
When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
Good Luck! and have a Nice Day! -
"adobe updater preferences" window doesn't show
i have the newest adobe reader X and im trying to disable auto update as it says in many instructions on the net
the problem is that i cant get to "Adobe Updater Preferences" window which is necessary to do this - the instructions says that it should appear after clicking "Help"-"Check for Updates" but i see only software checking for updates, completes the check and informing me about any new updates AND THAT'S ALL. just the information that there are no any new updates. there are no any "preferences" option or something as it shows for example below:
http://www.chotocheeta.com/2007/11/01/turn-off-adobe-auto-update/
any idea whats going on? all sites says that this window should be there...i did this before i started this thread ("do not download or install updates automatically")... it doesnt change anything.
really, wouldnt be life easier if people would disable auto update on SAME window where updates popup? why we must spend our time for searching something that could be just next to info about new updates waiting for download? then wouldnt be this and thounds of other threads :/ -
My system preference window doesn't show
system preference doesn't show anymore...
Mind following these instructions?
Quit System Preferences (right-click on dock icon, then Quit). Launch the Console app (under Applications -> Utilities), and see if you get error messages once you try launching System Prefs again.
Copy and paste those into a post here. Just the relevant ones, not hundreds others.
Error messages in the Console app, of course. -
Awesome: Windows remain present all the time after libpng update
Hi there,
After the libpng update this week, my awesome behvaes strange.
As awesome depends on cairo-xcb, I‘ve downloaded the tarball from this page, extracted it and ran makepkg -s followed by sudo pacman -U. Seemed to work, so I repeated these steps both for awesome and vicious-git and finally ran sudo pacman -Syu. During the last few days, I repeated some of theses steps (eg. I rebuilt cairo-xcb again)
So I was able to launch Awesome again, but some strange issues occured: After closing (or even killing) windows or switching tags, windows remain present. The awesome context menu behaves as these windows: It does not vanish. In fact, if I open more than one window, awesome becomes practically unuseable.
I moved my awesome config file (~/.config/awesome/rc.lua) and therefore awesome loaded the default config file, but the error occured again.
So, after googling and asking in the IRC (nice to know that most awesome guys do not have problems with this update…), I finally use the forum
Thanks for helping me out here, Keba.
PS: Obviously, the “awesome“ in the title refers to the window manager not to the awesomeness of this error.
//Edit: If I move windows, they leave some lines behind them, so awesome seems to have problems redrawing the screen correctly…
Last edited by Keba (2012-02-06 22:34:18)anrxc wrote: Maybe you use xcompmgr?
Yes, and disabling that helps, thanks a lot
For some reason I use the non-git-version, so I built the git version and installed it. Even after rebuilding cairo-xcb again, I get the same problem again So, how to use xcompmgr?
Thanks, Keba. -
Numbers doesn't show old spreadsheets after software update
I Need to use my iPad to access the spreadsheets I created in numbers and before I update to OS8 I was able to see them from my iPad. What's the deal? I've got the "use icloud" turned on. What am I missing?
Your Mac is storing the spreadsheets in icloud. But when you updated your iPad to iOS 8 you most likely turned on iCloud Drive. The two do not communicate with each other and the Mac running Mavericks does not support iCloud Drive. Once you update your Mac to Yosemite iCloud Drive will work on both.
In the meantime you might be able to email the spreadsheets from your Mac to your iPad. -
Using Mac OSX10.6.7 and FF 4.0.1, I'm having a problem with the preference to always show the tab bar. I want it to always show. I check this in the Preferences under the "tab" window, and everything is fine until I quit FF and when I restart FF the tab bar is gone again. I go into preferences, and that option is now unchecked. How can I fix this so that my preference is saved?
That hasn't helped the last ten times I tried. I posted before. I deleted the preferences file, I tried changing the preferences file, I went into about:config and changed the autoHide preference there. No dice. Firefox is not saving my preference for that one thing.
-
I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions. HELP PLEASE!
yeah i plugged in my iphone to my computer and itunes does not even notice that i plugged it in.
-
I downloaded an album from iTunes on my iPad and then i synced it with iTunes it doesn't show the individual songs in my library just the album which opens another window. One of the albums won't even play the music. Will only open the "booklet" for the cd but not the music. Can you help?
Hello dannugget
Normally, if the songs showed that it is purchased then it is probably already in your library. If not check out the article below to walk you through downloading your past purchases. You may also want to check to see if you have Automatic Downloads turned on so that way next time you can get your tracks without having to plug in and sync.
Download past purchases
http://support.apple.com/kb/ht2519
iTunes Store: How to enable Automatic Downloads
http://support.apple.com/kb/ht4539
Regards,
-Norm G. -
I use iphone5, I see an app update on the app store. but when App store and click on the update tab, it doesn't show me which application to update.. just gives me a blank page.!!!! I wouldn't able to know what app has to be updated, untill and unless i get check for each every app on the app store installed on my iphone... what is the solution for this.!!!! can any1 one help me out.!!!!
Cc2528 wrote:
The iTunes Store on my iPad is set up with all my music already. And at the very bottom it shows my apple Id username. The only place it shows the previous owners id is in the App Store...
You can probably change the ID in the "iTunes and App stores" settings on the iPad....click on the wrong account ID , select sign out, then log in with your own ID, I have not done this but I think it works.....
but I would be more inclined to to the factory reset and start afresh. -
I have Windows 7 Professional and I used to be able to move the curser over the Firefox Icon in the taskbar and it would show me a telescoped view of all open tabs, now it just shows the tab that I'm currently viewing. How do I fix this?
Hey MikeDo,
Do you have the option checked for ''Show Tab Previews in the Windows Taskbar''? If not, just go to ''tools->options->tabs.'' You can find more information on what each of these settings do in the Knowledge Base article [[Options window - Tabs panel]].
Hopefully this helps! -
The downloads window doesn't show files that I download them.Please, Note: I've already installed IDM 6.04 Build 2 & IE 8 is still my default browser.
neuwerld wrote:
Ohh thanks guys!
It worked as a charm, and thanks Brisbin33 for the autostart.sh tip.
So the thing that caused my whole system not to work as it should was that I forgot to put a "&" after conky?
haha that´s kinda anoying I have been sitting and looking through like a milllion files looking for the answer
But again, really thanks!
/Neuwerld
that little "&" sends the conky process to the background freeing up the current process (your autostart.sh script) to finish doing what it's doing so you can move on to running openbox itself. with this in mind, it should be obvious why keeping conky in the foreground would cause problems.
also, replacing it with (sleep 1 && conky) & means... wait a second, when that's done successfully (&&) run conky, and put all of that () to the background. that way openbox comes up immediatly and only a second later you've got your panel and monitor.
all this after .xinitrc and before openbox -
When you are looking for the control/indicator handled by a case in the Event structure, you can use the contextual menu item "Find Control" (doesn't distinguish between control and indicator, BTW).
The result is that the control/indicator is highlighted on the FP. The problem is, if that control is in a Tab and specifically in a page of that Tab that happens to not be the frontmost, the only thing you'll see is marching ants, but no control:
<=========== the wrong TAB page was shown. LV did not bother to switch to the relevant one....
In other words, "Find Control" in the Event Structure doesn't switch the tab to the owning page. This is contrary to what happens if you right-click, say, the terminal of this control: the FP will switch to the owning Tab page.
I'd call this a bug and this is definitely an annoyance (which most likely has been around since the creation of the Event Structure).I did not. Is there any better chance for it to be caught there by a NI eye than it is in the LV forum? I though these threads were deemed to gather bugs/features that had been already acknowledged by NI with a CAR number.
I (and others!) wished there was something like this: http://bugs.sun.com/ or http://bugs.python.org/ for LabVIEW...
I am just coming back from a short conference of scientists who quite uninamously ended up with the conclusion that LabVIEW was to be disregarded as a lab development environment because of maintenance problems (which could have been argued for any language in my opinion, although I think they meant spaghetti diagrams are the natural tendency of students who could not care less as they are not going graduate because of their LV skills or lack thereof), but I guess I could have added my grain of salt and added the complete opacity on bug and feature handling by NI. -
when I'm looking at my recent text messages on my phone, and I'm on the screen where I see a list of people I have texted. I click on a name to open up the conversation, however it is blank and doesn't show the conversation even though we've been texting back and forth the day before. So my question is how can I see the conversation?
Try the following procedure:
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss) -
Skype window doesn't show up after logging in
After I log in to Skype I see the icon show up in my task bar but the window doesn't show up and clicking on the icon doesn't do anything.
And the times when the window DOES show up after signing in, it's not responding.
Is there a way to fix this? I have the latest version of Skype and am using Windows 8.1Please, run the DirectX diagnostics tool (32-bit version).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.
Maybe you are looking for
-
Installing Office Web Apps Server 2013 fails with app-crash during install.
Hi Folks, I am trying to install Office Web Apps Server 2013 with SP1 on Server 2012 R2. The installation gets half way through then crashes (it just says a problem has occurred). The Event log only contains the message:- MsiExec.exe version .5.09.
-
Schedule Job with Job_close after successful job doesn't work
Hi guys, I'm using FM CLOSE_JOB with parameters : JOBCOUNT = w_JobId JOBNAME = w_JobName PREDJOB_CHECKSTAT = 'X' PRED_JOBCOUNT = w_oldJobId PRED_JOBNAME
-
Show shared calendars in ical wiki
Hello everybody, We use the snow leopard server version 10.6.4 on a xServe. Personal calendars are shared, so we can see the calendars of each others in iCal. But I want to make visible the shared calendars on the wiki (calendar) server. Now I can on
-
Alps Pointing device scrolls but won't go back or forward in Firefox, but works in Internet Explorer
Alps Pointing device touch pad, version 6.0.304.6, on my Toshiba Qosmio G25-AV513 running WinXP up to date , scrolls but won't go back or forward in Firefox, but fully works in Internet Explorer. I tried installing the latest driver available from To
-
Cisco APs get disconnected from cisco WLC after 30 min when connected on Juniper SRX
Hi, I am connecting all my Cisco 1131AG APs via Juniper SRX 240 box and Cisco WLC is placed in the LAN. We are running LWAPP in layer 3 mode. The APs get dissassociated form the WLC after 30 min. The Setup is like :- AP->AccessSwitch-->JuniperSRX(ret