Java process table empty after upgrade solution manager 7.1 Sp10
Hi Experts,
I have installed solution manager 7.1 SP3 and completed the SP10 patch upgrade using SUM tool. The upgrade was completed successfully. After upgrade igswd was red. Then i copied the Igs files in kernel files. Now ABAP instance and Igs is working now but JAVA is not coming up. JAVA process table also empty. Can any one help me to solve this issue. Attached the error for reference.
trc file: "dev_disp", trc level: 1, release: "721"
sysno 00
sid VSM
systemid 562 (PC with Windows NT)
relno 7210
patchlevel 0
patchno 201
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\VKCSOL\sapmnt\VSM\SYS\profile\VSM_DVEBMGS00_VKCSOL
pid 5448
kernel runs with dp version 138000(ext=120000) (@(#) DPLIB-INT-VERSION-138000-UC)
length of sys_adm_ext is 592 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 5448) [dpxxdisp.c 1316]
shared lib "dw_xml.dll" version 201 successfully loaded
shared lib "dw_xtc.dll" version 201 successfully loaded
shared lib "dw_stl.dll" version 201 successfully loaded
shared lib "dw_gui.dll" version 201 successfully loaded
shared lib "dw_mdm.dll" version 201 successfully loaded
shared lib "dw_rndrt.dll" version 201 successfully loaded
shared lib "dw_abp.dll" version 201 successfully loaded
shared lib "dw_sym.dll" version 201 successfully loaded
shared lib "dw_aci.dll" version 201 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Tue Apr 01 19:02:09 2014
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 6 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6479]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
display_tcp_ip: 0
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >VKCSOL_VSM_00 <
DpShMCreate: sizeof(wp_adm) 42864 (2256)
DpShMCreate: sizeof(tm_adm) 5517056 (27448)
DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
DpShMCreate: sizeof(comm_adm) 1384080 (2744)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (296)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (2160)
DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3952
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DDE0050, size: 7174832)
DpShMCreate: allocated sys_adm at 000000000DDE0060
DpShMCreate: allocated wp_adm_list at 000000000DDE30B0
DpShMCreate: allocated wp_adm at 000000000DDE32A0
DpShMCreate: allocated tm_adm_list at 000000000DDEDA20
DpShMCreate: allocated tm_adm at 000000000DDEDA70
DpShMCreate: allocated wp_ca_adm at 000000000E330980
DpShMCreate: allocated appc_ca_adm at 000000000E340390
DpShMCreate: allocated comm_adm at 000000000E34FDA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000E4A1C40
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 000000000E4A1CF0
DpShMCreate: allocated j2ee_adm at 000000000E4A1D30
DpShMCreate: allocated ca_info at 000000000E4A2CB0
DpShMCreate: allocated wall_adm at 000000000E4A2D40
DpCommAttachTable: attached comm table (header=000000000E34FDA0/ft=000000000E34FDB0)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (10 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> EsILock: use spinlock for locking
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 16383MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 16384MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 4095 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 192 MB
mm.dump: set global maximum dump mem to 192 MB
EsRegisterEmCheck: Register EmGetEsHandles at 000000013FC48640
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
J2EE server info
start = TRUE
state = STARTED
pid = 5824
argv[0] = D:\usr\sap\VSM\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\VSM\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=\\VKCSOL\sapmnt\VSM\SYS\profile\VSM_DVEBMGS00_VKCSOL
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=VSM
argv[7] = -DSAPMYNAME=VKCSOL_VSM_00
argv[8] = -DSAPPROFILE=\\VKCSOL\sapmnt\VSM\SYS\profile\VSM_DVEBMGS00_VKCSOL
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 4.0.1 4.0.1 5.1) [dpxxdisp.c 1702]
***LOG Q0K=> DpMsAttach, mscon ( VKCSOL) [dpxxdisp.c 12707]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >VKCSOL_VSM_00 <)
DpStartStopMsg: start msg sent
CCMS: Initialized monitoring segment of size 60000000.
CCMS: Initialized CCMS Headers in the shared monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: AlMsUpload called by wp 1024.
Tue Apr 01 19:02:10 2014
01.04.2014 13:32:10.628 PID=5448, TID=5744 SapTimer info. QPC/Windows time mismatch. System suspended, busy, missing ticks. Mismatch QpcTime-WindowsTime: -168 millisec (max +0). Slept 1000 millisec, Qpc elapsed: +1000 millisec, WindowsUtc elapsed +1168 millisec. SapTime-WindowsUtcTime=-1 seconds. TotalTimeCorrection=+0 millisec, QpcTime-WindowsUtcTime=-1028 millisec (*).
Tue Apr 01 19:02:11 2014
CCMS: AlMsUpload successful for D:\usr\sap\VSM\DVEBMGS00\log\ALMTTREE.DAT (2189 MTEs).
Tue Apr 01 19:02:13 2014
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
Tue Apr 01 19:02:21 2014
DpModState: change server state from STARTING to ACTIVE
Tue Apr 01 19:02:23 2014
***LOG Q0I=> NiIRead: P=127.0.0.1:61107; L=127.0.0.1:65000: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5086]
*** ERROR => NiIRead: SiRecv failed for hdl 33/sock 1008
(SI_ECONN_BROKEN/10054; I4; ST; P=127.0.0.1:61107; L=127.0.0.1:65000) [nixxi.cpp 5086]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5824)
*** ERROR => DpProcKill: kill failed [dpntdisp.c 397]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Regards
Jose H.
Hi Ashutosh,
Thanks for your immediate reply. Please find the log below.
trc file: "dev_server0", trc level: 1, release: "721"
node name : ID3506750
pid : 8068
system name : VSM
system nr. : 00
started at : Sat Mar 29 13:41:08 2014
arguments :
arg[00] : D:\usr\sap\VSM\DVEBMGS00\exe\jlaunch.exe
arg[01] : pf=D:\usr\sap\VSM\SYS\profile\VSM_DVEBMGS00_VKCSOL
arg[02] : -DSAPINFO=VSM_00_server
arg[03] : pf=D:\usr\sap\VSM\SYS\profile\VSM_DVEBMGS00_VKCSOL
arg[04] : -DSAPSTART=1
Used property files
-> files [00] : D:\usr\sap\VSM\DVEBMGS00\j2ee\cluster\instance.properties
Bootstrap nodes
-> [00] bootstrap : D:\usr\sap\VSM\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID3506700 : D:\usr\sap\VSM\DVEBMGS00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID3506750 : D:\usr\sap\VSM\DVEBMGS00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID3506700 : D:\usr\sap\VSM\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] ID3506750 : D:\usr\sap\VSM\DVEBMGS00\j2ee\cluster\instance.properties
JStartupReadInstanceProperties: read instance properties [D:\usr\sap\VSM\DVEBMGS00\j2ee\cluster\instance.properties]
-> ms host : VKCSOL
-> ms port : 3901
-> OS libs : D:\usr\sap\VSM\DVEBMGS00\j2ee\os_libs
-> Admin URL :
-> run mode : safe
-> run action : UPGRADE
-> enabled : yes
[Thr 19300] Sat Mar 29 13:41:08 2014
[Thr 19300] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 19300] JLaunchRequestQueueInit: create pipe listener thread
[Thr 19300] JLaunchInitSignalHandling: signal handling is disabled
[Thr 4928] WaitSyncSemThread: Thread 4928 started as semaphore monitor thread.
[Thr 23444] JLaunchRequestFunc: Thread 23444 started as listener thread for np messages.
[Thr 19300] NiInit3: NI already initialized; param 'maxHandles' ignored (init=2;par=32768;cur=2048)
[Thr 19300] MPI: dynamic quotas disabled.
[Thr 19300] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
[Thr 19300] CCMS: Detected Double Stack (parameter "rdisp/j2ee_start" is active)
[Thr 19300] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
[Thr 19300] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
[Thr 19300] CCMS: CCMS Monitoring Initialization finished, rc=0.
[Thr 19300] *** WARNING => Maximum Java heap size specified twice (through maxHeapSize and in javaParameters) - using -Xmx2048m [jstartxx.c 2800]
[Thr 19300] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\VSM\DVEBMGS00\exe\jvmx.jar
JStartupIReadSection: read node properties [ID3506750]
-> node name : server0
-> node type : server
-> node execute : yes
-> jlaunch parameters :
-> java path : D:\usr\sap\VSM\DVEBMGS00\exe\sapjvm_4
-> java parameters : -XX:MaxNewSize=600M -XX:NewSize=600M -XX:MaxPermSize=512M -XX:PermSize=512M -XX:+UseConcMarkSweepGC -XX:+DisableExplicitGC -XX:TargetSurvivorRatio=90 -XX:SurvivorRatio=4 -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -verbose:gc -XX:SoftRefLRUPolicyMSPerMB=1 -XX:HeapDumpPath=OOM.hprof -XX:+HeapDumpOnOutOfMemoryError -Djco.jarm=1 -Djava.awt.headless=true -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dsun.io.useCanonCaches=false -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dcom.sap.jvm.scenario=j2ee -XX:+JavaMonitorsInStackTrace -Xbootclasspath/p:D:/usr/sap/DAA/SMDA97/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.2.3.5-2011-09-13/wily/connectors/AutoProbeConnector.jar;D:/usr/sap/DAA/SMDA97/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.2.3.5-2011-09-13/wily/Agent.jar -Dcom.wily.introscope.agent.agentName=VSM_DVEBMGS00_server0 -Dcom.wily.introscope.agentProfile=D:/usr/sap/DAA/SMDA97/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.2.3.5-2011-09-13/wily/IntroscopeAgent.profile -Dstartup.mode=SAFE -Dstartup.action=UPGRADE
-> java vm version : 4.1.024 1.6-b04
-> java vm vendor : SAP Java Server VM (SAP AG)
-> java vm type : server
-> java vm cpu : amd64
-> heap size : 2048M
-> init heap size : 2048M
-> stack size : 2M
-> root path : D:\usr\sap\VSM\DVEBMGS00\j2ee\cluster\server0
-> class path : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path : D:\usr\sap\VSM\DVEBMGS00\j2ee\os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : D:\usr\sap\VSM\DVEBMGS00\exe\jstartup.jar;D:\usr\sap\VSM\DVEBMGS00\exe\jvmx.jar
-> shutdown class : com.sap.engine.boot.Start
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 50021
-> shutdown timeout : 120 sec.
[Thr 19300] JLaunchISetDebugMode: set debug mode [no]
[Thr 9092] JLaunchIStartFunc: Thread 9092 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack : 2097152 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -XX:MaxNewSize=600M
-> arg[ 4]: -XX:NewSize=600M
-> arg[ 5]: -XX:MaxPermSize=512M
-> arg[ 6]: -XX:PermSize=512M
-> arg[ 7]: -XX:+UseConcMarkSweepGC
-> arg[ 8]: -XX:+DisableExplicitGC
-> arg[ 9]: -XX:TargetSurvivorRatio=90
-> arg[ 10]: -XX:SurvivorRatio=4
-> arg[ 11]: -XX:+PrintGCDetails
-> arg[ 12]: -XX:+PrintGCTimeStamps
-> arg[ 13]: -verbose:gc
-> arg[ 14]: -XX:SoftRefLRUPolicyMSPerMB=1
-> arg[ 15]: -XX:HeapDumpPath=OOM.hprof
-> arg[ 16]: -XX:+HeapDumpOnOutOfMemoryError
-> arg[ 17]: -Djco.jarm=1
-> arg[ 18]: -Djava.awt.headless=true
-> arg[ 19]: -Djava.security.policy=./java.policy
-> arg[ 20]: -Djava.security.egd=file:/dev/urandom
-> arg[ 21]: -Dsun.io.useCanonCaches=false
-> arg[ 22]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 23]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 24]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
-> arg[ 25]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 26]: -Dcom.sap.jvm.scenario=j2ee
-> arg[ 27]: -XX:+JavaMonitorsInStackTrace
-> arg[ 28]: -Xbootclasspath/p:D:/usr/sap/DAA/SMDA97/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.2.3.5-2011-09-13/wily/connectors/AutoProbeConnector.jar;D:/usr/sap/DAA/SMDA97/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.2.3.5-2011-09-13/wily/Agent.jar
-> arg[ 29]: -Dcom.wily.introscope.agent.agentName=VSM_DVEBMGS00_server0
-> arg[ 30]: -Dcom.wily.introscope.agentProfile=D:/usr/sap/DAA/SMDA97/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.2.3.5-2011-09-13/wily/IntroscopeAgent.profile
-> arg[ 31]: -Dstartup.mode=SAFE
-> arg[ 32]: -Dstartup.action=UPGRADE
-> arg[ 33]: -Dsys.global.dir=D:\usr\sap\VSM\SYS\global
-> arg[ 34]: -Dapplication.home=D:\usr\sap\VSM\DVEBMGS00\exe
-> arg[ 35]: -Djava.class.path=D:\usr\sap\VSM\DVEBMGS00\exe\jstartup.jar;D:\usr\sap\VSM\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 36]: -Djava.library.path=D:\usr\sap\VSM\DVEBMGS00\exe\sapjvm_4\jre\bin\server;D:\usr\sap\VSM\DVEBMGS00\exe\sapjvm_4\jre\bin;D:\usr\sap\VSM\DVEBMGS00\exe\sapjvm_4\bin;D:\usr\sap\VSM\DVEBMGS00\j2ee\os_libs;D:\usr\sap\VSM\DVEBMGS00\exe\sapjvm_4\jre\bin\server;D:\usr\sap\VSM\DVEBMGS00\exe\sapjvm_4\jre\bin;D:\usr\sap\VSM\DVEBMGS00\exe\sapjvm_4\bin;D:\usr\sap\VSM\DVEBMGS00\j2ee\os_libs;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;D:\usr\sap\VSM\DVEBMGS00\exe;D:\usr\sap\VSM\SYS\exe\uc\NTAMD64
-> arg[ 37]: -Dmemory.manager=2048M
-> arg[ 38]: -Xmx2048M
-> arg[ 39]: -Xms2048M
-> arg[ 40]: -Xss2M
-> arg[ 41]: -DLoadBalanceRestricted=no
-> arg[ 42]: -Djstartup.mode=JCONTROL
-> arg[ 43]: -Djstartup.ownProcessId=8068
-> arg[ 44]: -Djstartup.ownHardwareId=I0649086862
-> arg[ 45]: -Djstartup.whoami=server
-> arg[ 46]: -Djstartup.debuggable=no
-> arg[ 47]: -Xjvmx
-> arg[ 48]: -XsapSystem=00
-> arg[ 49]: -XmonGcCallback
-> arg[ 50]: -DSAPINFO=VSM_00_server
-> arg[ 51]: -DSAPSTART=1
-> arg[ 52]: -DSAPSTARTUP=1
-> arg[ 53]: -DSAPSYSTEM=00
-> arg[ 54]: -DSAPSYSTEMNAME=VSM
-> arg[ 55]: -DSAPMYNAME=VKCSOL_VSM_00
-> arg[ 56]: -DSAPDBHOST=VKCSOL
-> arg[ 57]: -Dj2ee.dbhost=VKCSOL
(CompilerOracle read from file D:\usr\sap\VSM\DVEBMGS00\exe\sapjvm_4\jre\.hotspot_compiler)
[Thr 9092] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [server0]
[Thr 20084] Sat Mar 29 13:41:10 2014
[Thr 20084] JHVM_RegisterNatives: com.sap.bc.krn.perf.PerfTimes
2.781: [GC 2.781: [ParNew: 409600K->2306K(512000K), 0.0126041 secs] 409600K->2306K(1994752K), 0.0127881 secs] [Times: user=0.05 sys=0.00, real=0.01 secs]
[Thr 20084] Sat Mar 29 13:41:11 2014
[Thr 20084] JHVM_RegisterNatives: com.sap.bc.proj.jstartup.JStartupFramework
[Thr 20084] JLaunchISetClusterId: set cluster id 3506750
[Thr 20084] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 20084] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
Sat Mar 29 13:41:23 2014
15.071: [GC 15.071: [ParNew: 411906K->16315K(512000K), 0.0306641 secs] 411906K->16315K(1994752K), 0.0309011 secs] [Times: user=0.13 sys=0.00, real=0.03 secs]
Sat Mar 29 13:41:32 2014
24.118: [GC 24.118: [ParNew: 425915K->29114K(512000K), 0.0363407 secs] 425915K->29114K(1994752K), 0.0365634 secs] [Times: user=0.11 sys=0.02, real=0.04 secs]
[Thr 18736] Sat Mar 29 13:41:38 2014
[Thr 18736] JHVM_RegisterNatives: com.sap.mona.api.JMonAPI
[Thr 18736] CCMS: openMonitoringSegment(): inside static JMON Lib: already connected.
[Thr 17644] JHVM_RegisterNatives: com.sap.mw.rfc.driver.CpicDriver
[Thr 19340] JHVM_RegisterNatives: com.sap.security.core.server.vsi.service.jni.VirusScanInterface
[Thr 7816] Sat Mar 29 13:41:39 2014
[Thr 7816] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 7816] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 25/sock 7884
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 17936] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 17936] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 17/sock 7888
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 3285]
31.816: [GC 31.816: [ParNew[Thr 21936] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 21936] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 7856
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 2800] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 2800] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 9/sock 7860
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
: 438714K->67978K(512000K), 0.0626636 secs] 438714K->67978K(1994752K), 0.0628963 secs] [Times: user=0.11 sys=0.08, real=0.06 secs]
[Thr 7276] Sat Mar 29 13:41:40 2014
[Thr 7276] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 7276] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 7988
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 3285]
[Thr 24572] Sat Mar 29 13:41:42 2014
[Thr 24572] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 24572] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 8132
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 5092] Sat Mar 29 13:41:43 2014
[Thr 5092] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 5092] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 35/sock 8088
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 20084] JLaunchISetState: change state from [Starting (2)] to [Starting applications (10)]
[Thr 24276] Sat Mar 29 13:41:44 2014
[Thr 24276] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 24276] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 36/sock 8480
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 1316] Sat Mar 29 13:41:45 2014
[Thr 1316] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 1316] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 37/sock 9292
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 13068] Sat Mar 29 13:41:46 2014
[Thr 13068] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 13068] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 38/sock 9736
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 19652] JLaunchISetState: change state from [Starting applications (10)] to [Running (3)]
[Thr 17680] Sat Mar 29 13:41:47 2014
[Thr 17680] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 39/sock 9736
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 23760] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 23760] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 10/sock 5976
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 3285]
[Thr 17680] Sat Mar 29 13:41:48 2014
[Thr 17680] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 32/sock 9736
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 17680] Sat Mar 29 13:41:49 2014
[Thr 17680] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 9736
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 3285]
[Thr 17680] Sat Mar 29 13:41:50 2014
[Thr 17680] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 6272
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 5348] Sat Mar 29 13:41:51 2014
[Thr 5348] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 5348] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 35/sock 6336
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 17548] Sat Mar 29 13:41:52 2014
[Thr 17548] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 17548] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 36/sock 6548
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 4216] Sat Mar 29 13:41:53 2014
[Thr 4216] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 4216] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 37/sock 6424
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 23788] Sat Mar 29 13:41:54 2014
[Thr 23788] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 23788] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 38/sock 6844
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 6100] Sat Mar 29 13:41:55 2014
[Thr 6100] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 6100] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 39/sock 7448
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 6828] Sat Mar 29 13:41:56 2014
[Thr 6828] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 6828] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 32/sock 6216
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 644] Sat Mar 29 13:41:57 2014
[Thr 644] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 644] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 5992
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 7376] Sat Mar 29 13:41:58 2014
[Thr 7376] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 7376] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 6136
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 24096] Sat Mar 29 13:41:59 2014
[Thr 24096] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 24096] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 35/sock 6004
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 24460] Sat Mar 29 13:42:00 2014
[Thr 24460] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 24460] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 36/sock 6276
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 13452] Sat Mar 29 13:42:01 2014
[Thr 13452] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 13452] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 37/sock 7328
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 17884] Sat Mar 29 13:42:03 2014
[Thr 17884] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 17884] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 38/sock 7372
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 6616] Sat Mar 29 13:42:04 2014
[Thr 6616] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 6616] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 39/sock 7200
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 3136] Sat Mar 29 13:42:05 2014
[Thr 3136] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 3136] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 32/sock 6344
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 8284] Sat Mar 29 13:42:06 2014
[Thr 8284] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 8284] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 7380
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 19240] Sat Mar 29 13:42:07 2014
[Thr 19240] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 19240] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 6940
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 21316] Sat Mar 29 13:42:08 2014
[Thr 21316] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 21316] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 35/sock 5988
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 22436] Sat Mar 29 13:42:09 2014
[Thr 22436] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 22436] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 36/sock 7368
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 20936] Sat Mar 29 13:42:10 2014
[Thr 20936] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 20936] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 37/sock 7528
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 18784] Sat Mar 29 13:42:11 2014
[Thr 18784] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 18784] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 38/sock 4460
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 3285]
[Thr 21320] Sat Mar 29 13:42:12 2014
[Thr 21320] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 21320] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 39/sock 6148
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 3285]
[Thr 19632] Sat Mar 29 13:42:13 2014
[Thr 19632] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 19632] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 32/sock 5948
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 3285]
[Thr 8684] Sat Mar 29 13:42:14 2014
[Thr 8684] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 8684] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 6012
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 3285]
[Thr 7468] Sat Mar 29 13:42:15 2014
[Thr 7468] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 7468] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 6032
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 3285]
[Thr 5588] Sat Mar 29 13:42:16 2014
[Thr 5588] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 5588] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 35/sock 1032
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 3285]
[Thr 2036] Sat Mar 29 13:42:17 2014
[Thr 2036] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 2036] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 36/sock 6052
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 3285]
[Thr 6692] Sat Mar 29 13:42:18 2014
[Thr 6692] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 6692] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 37/sock 6188
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 3285]
[Thr 5184] Sat Mar 29 13:42:19 2014
[Thr 5184] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 5184] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 38/sock 6192
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 3285]
[Thr 5604] Sat Mar 29 13:42:20 2014
[Thr 5604] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 5604] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 39/sock 6220
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 3285]
[Thr 15996] Sat Mar 29 13:42:21 2014
[Thr 15996] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 15996] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 32/sock 6236
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 3285]
[Thr 17680] Sat Mar 29 13:42:22 2014
[Thr 17680] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 6236
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 17680] Sat Mar 29 13:42:23 2014
[Thr 17680] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 6236
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 17680] Sat Mar 29 13:42:24 2014
[Thr 17680] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 35/sock 6236
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 3285]
[Thr 17680] Sat Mar 29 13:42:26 2014
[Thr 17680] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 36/sock 6064
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 19856] Sat Mar 29 13:42:27 2014
[Thr 19856] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 19856] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 37/sock 6184
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 24128] Sat Mar 29 13:42:28 2014
[Thr 24128] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 24128] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 38/sock 6248
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 13684] Sat Mar 29 13:42:29 2014
[Thr 13684] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 13684] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 39/sock 6260
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 7384] Sat Mar 29 13:42:30 2014
[Thr 7384] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 7384] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 32/sock 6264
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 7432] Sat Mar 29 13:42:31 2014
[Thr 7432] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 7432] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 6292
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 6700] Sat Mar 29 13:42:32 2014
[Thr 6700] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 6700] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 6304
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 7272] Sat Mar 29 13:42:33 2014
[Thr 7272] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 7272] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 35/sock 6340
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 19864] Sat Mar 29 13:42:34 2014
[Thr 19864] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 19864] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 36/sock 6392
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 5608] Sat Mar 29 13:42:35 2014
[Thr 5608] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 5608] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 37/sock 6404
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 7160] Sat Mar 29 13:42:36 2014
[Thr 7160] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 7160] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 38/sock 6416
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 14536] Sat Mar 29 13:42:37 2014
[Thr 14536] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 14536] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 39/sock 7340
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 24404] Sat Mar 29 13:42:38 2014
[Thr 24404] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 24404] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 32/sock 6232
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 22756] Sat Mar 29 13:42:39 2014
[Thr 22756] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 22756] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 6076
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 6284] Sat Mar 29 13:42:40 2014
[Thr 6284] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 6284] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 7472
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 12696] Sat Mar 29 13:42:41 2014
[Thr 12696] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 12696] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 35/sock 6380
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 24180] Sat Mar 29 13:42:42 2014
[Thr 24180] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 24180] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 36/sock 6420
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 23444] Sat Mar 29 13:42:43 2014
[Thr 23444] JLaunchRequestFunc: receive command:17, argument:0 from pid:20668
[Thr 23444] JLaunchIShutdownInvoke: set shutdown interval (stop:1396080763/end:1396080883/TO:120)
[Thr 23444] JLaunchProcessCommand: Invoke VM Shutdown
[Thr 23444] JHVM_FrameworkShutdownDirect: invoke direct shutdown
[Thr 8780] JLaunchISetState: change state from [Running (3)] to [Waiting for stop (4)]
[Thr 8780] JLaunchISetState: change state from [Waiting for stop (4)] to [Stopping (5)]
[Thr 5188] JHVM_RegisterNatives: com.sap.bc.proj.jstartup.sadm.ShmCache
[Thr 7240] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 7240] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 37/sock 6376
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 6536] Sat Mar 29 13:42:44 2014
[Thr 6536] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 6536] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 38/sock 6852
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 18244] Sat Mar 29 13:42:46 2014
[Thr 18244] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 18244] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 39/sock 6348
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 17680] Sat Mar 29 13:42:47 2014
[Thr 17680] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 32/sock 6348
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
[Thr 17680] Sat Mar 29 13:42:48 2014
[Thr 17680] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 6348
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 3285]
[Thr 22796] CCMS: closeMonitoringSegment(): inside static JMON Lib: nothing to do.
[Thr 8780] JLaunchISetState: change state from [Stopping (5)] to [Stopped (6)]
[Thr 17680] Sat Mar 29 13:42:49 2014
[Thr 17680] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
[Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 6348
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp 3285]
Heap
par new generation reserved 614400K, committed 614400K, used 313963K [0x000000007fff0000, 0x00000000a57f0000, 0x00000000a57f0000)
eden space 409600K, 60% used [0x000000007fff0000, 0x000000008f028658, 0x0000000098ff0000)
from space 102400K, 66% used [0x0000000098ff0000, 0x000000009d2528e8, 0x000000009f3f0000)
to space 102400K, 0% used [0x000000009f3f0000, 0x000000009f3f0000, 0x00000000a57f0000)
concurrent mark-sweep generation reserved 1482752K, committed 1482752K, used 0K [0x00000000a57f0000, 0x00000000ffff0000, 0x00000000ffff0000)
concurrent-mark-sweep perm gen reserved 524288K, committed 524288K, used 70349K [0x00000000ffff0000, 0x000000011fff0000, 0x000000011fff0000)
[Thr 18896] JLaunchIExitJava: exit hook is called (rc = 0)
[Thr 18896] JLaunchCloseProgram: good bye (exitcode = 0)
Regards
Jose H.
Similar Messages
-
Business Process Blueprinting Tool (BPB) Publish Error - Solution Manager 7.1 SP10
Hello SCN members!
The company where I work recently implemented the SAP Solution Manager 7.1 SP10 and now we are trying to learn how to use the SAP Business Process Blueprinting (BPB) Tool to design all enterprise processes inside it.
I followed all the steps of the official BPB installation guide and from another BPB discussion (http://scn.sap.com/thread/3258935) but the tool is not working properly. Some relevant points are:
I can create and publish Business Scenarios but can’t do the same with Business Processes
Business Scenario Created and Published:
Business Process created but not published, returning a connection error:
I don’t understand why the tool works for the Business Scenario level but not for the Business Process level. Could anyone help?
The log details are:
traceOutput.0.log
[EXCEPTION] com.sap.bpl.common.exception.BPLInternalServerErrorException: Could not establish connection with server at com.sap.bpl.soco.conn.impl.SoCoConnection.isOperationSuccessful(SoCoConnection.java:98) at com.sap.bpl.soco.conn.impl.SoCoConnection.publish(SoCoConnection.java:70) at com.sap.bpl.ral.resourceaccess.impl.GenericResourceAccess.publish(GenericResourceAccess.java:288) at com.sap.bpl.ebb.transaction.impl.TransactionManager.publish(TransactionManager.java:109) at com.sap.bpl.ebb.transaction.ui.dialogs.PublishPresentationModel.okPressed(PublishPresentationModel.java:130) at com.sap.bpl.ebb.transaction.ui.dialogs.PublishDialog.okPressed(PublishDialog.java:53) at com.sap.bpl.ebb.transaction.ui.dialogs.PublishAndRevertDialog.publishButtonPressed(PublishAndRevertDialog.java:267) at com.sap.bpl.ebb.transaction.ui.dialogs.PublishAndRevertDialog.access$000(PublishAndRevertDialog.java:49) at com.sap.bpl.ebb.transaction.ui.dialogs.PublishAndRevertDialog$2.widgetSelected(PublishAndRevertDialog.java:245) at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:228) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003) at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3910) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3503) at org.eclipse.jface.window.Window.runEventLoop(Window.java:825) at org.eclipse.jface.window.Window.open(Window.java:801) at com.sap.bpl.ebb.transaction.ui.handlers.PublishButtonHandler.publish(PublishButtonHandler.java:156) at com.sap.bpl.ebb.transaction.ui.handlers.PublishButtonHandler.execute(PublishButtonHandler.java:107) at org.eclipse.ui.internal.handlers.HandlerProxy.execute(HandlerProxy.java:294) at org.eclipse.core.commands.Command.executeWithChecks(Command.java:476) at org.eclipse.core.commands.ParameterizedCommand.executeWithChecks(ParameterizedCommand.java:508) at org.eclipse.ui.internal.handlers.HandlerService.executeCommand(HandlerService.java:169) at org.eclipse.ui.internal.handlers.SlaveHandlerService.executeCommand(SlaveHandlerService.java:241) at org.eclipse.ui.menus.CommandContributionItem.handleWidgetSelection(CommandContributionItem.java:770) at org.eclipse.ui.menus.CommandContributionItem.access$10(CommandContributionItem.java:756) at org.eclipse.ui.menus.CommandContributionItem$5.handleEvent(CommandContributionItem.java:746) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003) at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3910) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3503) at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2405) at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2369) at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221) at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500) at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149) at com.sap.bpl.ebb.EBBApplication.start(EBBApplication.java:19) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514) at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
The Palette and Standard Shapes are showing just a few options.
Are these the standard design objects or some are missing?
Thank you in advance for the answers!
Best Regards,
Vitor SoutinhoHello SCN members!
I solved both of my problems in BPB tool and would like to share with the community the solution.
Basically I recriated both logical ports in soamanager:
LP_SOCO_SOLAR
LP_SMSY
This solved all my problems detected in the tool.
Thanks again for the suggestions showed!
Best Regards,
Vitor Soutinho -
Here is my problem: "To open "Adobe Photoshop CS5.1" you need to install the legacy Java SE 6 RUNTIME" after upgrading iMac to Yosemite, can anybody help?
This answer may be somewhat late, but just in case other have the same issues, I went to site listed below and it solved the problem. No need to reinstall CS5 product. I hope this works for you.
http://support.apple.com/kb/DL1572 -
HT204478 How do I migrate? My Photos library is empty after upgrade.
How do I migrate? My Photos library is empty after upgrade.
I read here that I need to start while holding Option Key to select my iPhoto library. Seems to be "Preparing Library"
photos won't import from iPhoto to photos app -
OBJECTS_OBJREF_NOT_ASSIGNED in Solution manager 7.1 sp10
Hi,
I go ABAP dump every 5 and 10 minutes "OBJECTS_OBJREF_NOT_ASSIGNED" in our Solution Manager (7.1 SP10)
It saidHi Jerry,
Did u tried the below note
1959542 - The job SAP_LMDB_NOTIFY_LDB_* give the error "An exception of class CX_SY_REF_IS_INITIAL occurred Error: Dereferencing of the NULL reference" in Solution Manager 7.1
Also check the below note
1938744 - Diagnostic-relevant flags were unexpected deleted after system software is upgraded
Rg,
Karthik -
Post Installation steps for Solution Manager 4.0 SP10
Hi,
Can any one of you help me out to do the post installation steps to be done after installing solution manager.
Thanks in advance.
Thanks
VenuHi Dolores,
I am not able to find iTutor anywhere in service.sap.com/rkt-solman.
Could you please give us the perfect path for that?
Regards
Pranav -
Where do I set the polling frequency for Technical monitoring in Solution Manager 7.1 SP10 ??
Hi All,
I am customizing my technical monitoring templates and would like to know :
1. Where we can set the polling frequency for each metrics for triggering alerts through Technical monitoring in Solution Manager 7.1 SP10 ??
2. Is it like each time our threshold is breached, it will send an alert irrespective of polling frequency ??
I know the data collection interval time for each metrics in technical monitoring template but the as per my observation the polling frequency is different.
Need your guidance.
Regards,
Manish KHi Javier,
Refer to the documentation 'MAI Alert Consumer BAdI Interface' under
http://wiki.scn.sap.com/wiki/display/TechOps/Alert+Consumer+BAdI+Interface link for information on the input to the BAdI.
Kind regards,
Roland -
RW_SERVER_JOB_QUEUE table empty after running the report in 11g
Hello,
I set up Job StatusRepository in our environment ( Fusion Middleware 11.1.1.4 Win 2008 x32) as explained in Oracle Support note "How to Setup jobStatusRepository Feature in Reports 11g? [ID 858200.1]"
The table RW_SERVER_JOB_QUEUE is always empty after running the report.
I have checked another note "RW_SERVER_JOB_QUEUE table is empty [ID 1200613.1]" but the user who is running the report is the same as the user who " the user name where you run $ORACLE_HOME\reports\admin\sql\rw_server.sql script" so there is no grant problem to write to this table.
Here is the excerpt of rwserver.conf file:
<demo:jobStatusRepository class="oracle.reports.server.JobRepositoryDB">
<demo:property value="csf:reports:repo" name="dbpassword"/>
<demo:property value="blvdev" name="dbconn"/>
<demo:property value="pdmain" name="dbuser"/>
</demo:jobStatusRepository>
I n log file there is an error:
Apr 11, 2012 10:29:13 AM oracle.security.jps.internal.credstore.ssp.CsfWalletManager openWallet
WARNING: Opening of wallet based credential store failed. Reason java.io.IOException: PKI-02002: Unable to open the wallet. Check password.
Have anybody had the same issue in 11g?
Thanks,
AlexHere is the solution I found and I would like to share if anybody is interested :
Check the following Oracle Support Notes:
ALERT - After Applying Patchset 11.1.1.4, Fusion Middleware Control Inserts "demo:" Tags in Conf Files of Reports Server- ENVID Section Stops Working [ID 1298701.1]
After applying patchset 11.1.1.4 to Reports Server, any configuration changes through Fusion Middleware Control inserts "demo:" tags in the beginning of each line in conf file of Report Server.
The behaviour is described in the following bug :
Bug:11784251 MBEAN BROWSER ADDS A DEMO TAG IN RWSERVER.CONF AT EACH LINE
So you I removed all demo tags in rwserver.conf
<jobStatusRepository class="oracle.reports.server.JobRepositoryDB">
<property value="csf:reports:jobrepo" name="dbpassword"/>
<property value="repteam.us.oracle.com" name="dbconn"/>
<property value="jobrep11g" name="dbuser"/>
</jobStatusRepository>
Regarding : PKI-02002 error:
Error PKI-02002: Unable to open the wallet. Check password When Starting a Reports Server [ID 1316651.1]
Temporary file cannot be created in temporary directory.
After checking the wallet I simply changed the following lines
<variable id="TEMP" value="C:\Users\oracle\AppData\Local\Temp\2"/>
<variable id="TMP" value="C:\Users\oracle\AppData\Local\Temp\2"/>
to
<variable id="TEMP" value="C:\TEMP"/>
<variable id="TMP" value="C:\TEMP"/>
because the folder C:\Users\oracle\AppData\Local\Temp\2 was not created.
Regards,
Alex
Edited by: user12019587 on 11-Apr-2012 2:50 PM -
Error in Import Java Dump phase while installing SAP solution Manager 7.1
Hi,
While installing SAP solution manager 7.1 I am getting the below error during the phase "Import Java Dump".
An error occurred while processing option SAP Solution Manager 7.1 > SAP Systems > MS SQL Server > Central System > Central System( Last error reported by the step : Execution of JLoad tool 'C:\j2sdk1.4.2_17-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\SOLMAN71\SYSTEM\MSS\CENTRAL\AS\install\sharedlib\launcher.jar" -showversion -Xmx1024m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload "C:/Program Files/sapinst_instdir/SOLMAN71/SYSTEM/MSS/CENTRAL/AS/install/lib/iaik_jce.jar;C:/Program Files/sapinst_instdir/SOLMAN71/SYSTEM/MSS/CENTRAL/AS/install/sharedlib;D:/usr/sap/SPT/SYS/exe/uc/NTAMD64/mssjdbc/sqljdbc.jar" -sec SPT,jdbc/pool/SPT,
smn/sapmnt/SPT/SYS/global/security/data/SecStore.properties,
smn/sapmnt/SPT/SYS/global/security/data/SecStore.key -dataDir "D:/SAP SOLMAN/Java Components/51040039\DATA_UNITS\SOLMAN_JAVA_EXPORT_JDMP" -job "C:\Program Files\sapinst_instdir\SOLMAN71\SYSTEM\MSS\CENTRAL\AS\IMPORT.XML" -log jload.log' aborts with return code 1. SOLUTION: Check 'jload.log' and 'C:/Program Files/sapinst_instdir/SOLMAN71/SYSTEM/MSS/CENTRAL/AS/jload.java.log' for more information.
JLOAD.JAVA log details below
java version "1.4.2_17"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_17-b06)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_17-b06, mixed mode)
Jload R 7.12 V 0 A 0
Jload -sec SPT,jdbc/pool/SPT,
smn/sapmnt/SPT/SYS/global/security/data/SecStore.properties,
smn/sapmnt/SPT/SYS/global/security/data/SecStore.key -dataDir D:/SAP SOLMAN/Java Components/51040039\DATA_UNITS\SOLMAN_JAVA_EXPORT_JDMP -job C:\Program Files\sapinst_instdir\SOLMAN71\SYSTEM\MSS\CENTRAL\AS\IMPORT.XML -log jload.log
Connecting to database
Couldn't connect to DB
com.sap.inst.common.exception.DBConnectionException: com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect
at com.sap.inst.common.db.DBConnection.connect(DBConnection.java:157)
at com.sap.inst.jload.Jload.main(Jload.java:222)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.loginWithoutFailover(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
at com.sap.sql.connect.OpenSQLDataSourceImpl.createConnection(OpenSQLDataSourceImpl.java:522)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getConnection(OpenSQLDataSourceImpl.java:276)
at com.sap.inst.common.db.DBConnection.connectViaSecureStore(DBConnection.java:111)
at com.sap.inst.common.db.DBConnection.connect(DBConnection.java:151)
... 6 more
An error occured during execution. Please consult SAP note 942766 for first steps on troubleshooting the problem.
I have gone thru with the notes and it didn't help me much.
I have used J2SDK 1.4.2_17 nad JCE_Policy-1.4.2 files.
Please let me know where IO went wrong.
Thanks in advance.
SaiHi,
1. Did you select java path (Export CD/DVD) while intsallation? Check once again.
2. Add JAVA_HOME = Java path in environment variable.
3. What is the exact error, you got it, post error here.
Regards,
Srini Nookala -
Upgrade Solution Manager 7.1 add-on ST-ICO
Hi everybody
I'm upgrading from Solman 7.01 to 7.1.
In the prepartion I'm stucked at the phase ADD-ON selection.
The following stack is the target:
SAP_BASIS 702 0009 SAPKB70209 SAP Basis Component
SAP_ABA 702 0009 SAPKA70209 Cross-Application Component
PI_BASIS 702 0009 SAPK-70209INPIBASIS Basis Plug-In
ST-PI 2008_1_700 0005 SAPKITLRD5 SAP Solution Tools Plug-In
SAP_BS_FND 702 0007 SAPK-70207INSAPBSFND SAP Business Suite Foundation
SAP_BW 702 0009 SAPKW70209 SAP Business Warehouse
SAP_AP 700 0026 SAPKNA7026
WEBCUIF 701 0006 SAPK-70106INWEBCUIF SAP Web UI Framework
BBPCRM 701 0006 SAPKU70106 BBPCRM
BI_CONT 706 0002 SAPK-70602INBICONT Business Intelligence Content
CPRXRPM 500_702 0005 SAPK-50005INCPRXRPM SAP Portfolio and Project Management 5.0 (ABAP)
ST 710 0004 SAPKITL704 SAP Solution Manager Tool
ST-BCO 710 0002 SAPK-71002INSTBCO ST-BCO 710: Add-On Installation
SOCO 101 0001 SAPK-10101INSOCO SAP Solution Composer Server
ST-A/PI 01N_700SOL 0001 SAPKITAS1H Application Servicetools for SolMan 7.0-
ST-ICO 150_700 0031 SAPK-1507VINSTPL
ST-SER 701_2010_1 0010 SAPKITLOSA SAP Solution Manager Service Tools
The phase is suggesting correctly to keep the version for the component
ST-ICO 150_700
ST-PI
ST-SER 701_2010_1
after I continue I get the message that the KEEP YOURS decision is no longer valid and I need to decide whether I upgrade with SAINT or ADD-ON CD. Neither of those is working.
The XML file I used is the SPS04_upgrade_stack.xml from the Patch CD
Any idea`?
Thanks for your help
MuratHi,
For info, we have the same problem.
In our case, Solman run with a temporary key (hw change before upgrade).
After install of new license key and restart the "Configuration" phase, we can go on with "Keep version"
Best regards,
TH -
Managed System configuration for SAP NW Java system in Solution Manager 7.1 SP10
Hi All,
I am doing Managed system configuration for my SAP NW 7.01 Java system and getting below error in step 6 create users SAPSUPPORT & SM_COLL_SID.
"An unexpected error occured. An error occured while processing the UME command READ_USER from agent <hostname> : Server returned: 302 Found "
I have checked my DAA as well as host agents are up and running fine. My Solution Manager is 7.1SP10.
Please suggest.
Regards,
ManishManish,
Which UME you are using? portal/ABAP/LDAP
Are you using the SOLMAN_ADMIN user while configuring.
Also check the below forum.
https://scn.sap.com/thread/1167282
Regards,
Raja. G -
How to change table defnition after upgrade from 9 to 10 ?
after upgrade from 9 to 10, tables ddl still like 9i:
.................PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255..........
................ inndex PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS..........
Is there a method to convert it all tables to new 10g style without re-create thousands tables then emp/imp one by one?
ThanksWhat do you mean by "10g style"? Do you want tables to be using ASSM? If that's the case, that's a feature of tablespace itself. So it means that your tables need to be in those tablespace which are having Segment Space management auto set in them.I don't think that there is any automatic package which can do the same on the fly.
One way ,which may not be very less time consuming but still can help is to convert the segment space management using EM.But again,this does recreate teh tablespace so I don't think that this is any different from exp/imp.
HTH
Aman.... -
Upgrading Solution Manager SP13
Hi All,
We have decided to upgrade the Solution Manager system 7.0 SP13 to SP17. The issue we are having is one of the sapdata2 mount is 96% full.
But other sapdata mounts (sapdata1, sapdata3, sapdata4) are having sufficient space of around 20GB individually.
If i start the SP upgrade at this stage will space issue in sapdata2 mount, create some issue ?
We cant add more space for sapdata2 mount at this stage.
Kindly advice
OS is Solaris
Database : Oracle 10.2
Regards
NaveenYou can do this by 2 way.
1. Loging to OS level & check.
2.Goto tcode DB02>Current Sizes>Data files.
This will show you all datafiles. Here check which the tablespaces which are inside sapdata2 folder
Here check which are the tablespaces which are in sapdata2 & as said above analyze top tables & indexes.
Hope this helps.
Thanks,
Sushil -
Invalid data from serveral fact logical table sources after upgrade to 11g
Hi,
We have a situation after upgrade from 10g to 11g. Answers' querys works fine in 10g environment, but in 11g, generated SQL is not correct.
Our example is something like that: we have orders fact table, customers and time dimensions. Customer have an hierarchy like: Customer Total -> Customer Country -> Customer Region -> Customer Detail (each level in one different physical table).
Order's logical table source has two table sources. One sets to Customer Country level, second one Customer Region level, both with different WHERE clauses in Content tab inside LTS configuration. Both at same level of Time dimension.
The issue is that, at dimension level, SQL is getting correct table to resolve Customer data (Customer Region level), but then, is getting the WHERE clause sets in LTS set to Customer Country level, so we are getting error data. Priority is the same to both LTS at fact table, sets to 0 (default).
How to know the way Oracle BI Server takes one LTS instead of another one? It's supposed to take the LTS defined at the same granularity level... but is not correct this case.
Thanks.Can you try one of these options:
Try to set the priority group of lowest granular dimension to 1
or disable the LTS that is getting the where clause and check if it works fine and then enable again. -
Upgrade Solution Manager 4 to 7.1
Hi all,
Is it possible to have a direct upgrade from a solution manager 4 to 7.1? Or do i need to do other installation or upgrade before it is comparable for 7.1?
Pls advise. Thanks
Regard
GaryHello,
Solution manager 4 is synonymous with Solution Manager 7.0
The upgrade guide refere to the source system being
SAP Solution Manager 7.0
SAP Enhancement Package 1 for Solution Manager 7.0
And the target system being SAP Solution Manager 7.1
Therefore the answer is yes, you can upgrade from release 4.0/7.0 to 7.1
Have you visited
https://websmp105.sap-ag.de/~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=00200797470000065932
And also
http://service.sap.com/instguides -> SAP Components -> SAP Solution Manager -> Release 7.1. Upgrades
Regards,
Paul
Maybe you are looking for
-
Can you help me with this code
hi am new to java so please bare with me , so in this code as you can see i comment some lines of code the one i comment works when i compile it , but why the one with fields does not ? can you please explain this to me public class Demo3
-
Hello, I'm using Visual Studio 2010 to build a msi installer (windows installer 3.5). This msi will install all necessary files, dlls, documentation in order to have my application correctly installed and ready to run. One of my custom action allow t
-
HT201364 My Mac Pro is mid/late 2007
System requirements for upgrading states you need a Mac Pro early 2007 or later... Will upgrading to Mavericks DEFINITELY not work on my slightly older machine, or only POSSIBLY? Thanks Rob
-
I want to prompt a user for a Month; however, I don't want to show only the Month's data on the report...I want to the Month chose, the Previous Month's data, QTD of that Month and YTD of that Month. What is the best way to accomodate for this? Can I
-
What causes a question mark icon to appear in a finder window?
Hello, I was wondering if anyone knows what causes a question mark icon to appear at the top of a finder window? Thanks!