Java samples needed for both PC and Nokia HP to communicate via bluetooth
Hi Are there any java samples i need to test both PC and HP.
I have Nokia 6021 that runs java program. I ask for simple samples that
Java program in HP can send bits of data and the java program in PC reads and evaluates the result. For eg, i input numbers 5 and 6 into HP
then send them over via BT. Upon reception, PC receives input and adds them and shows the result.
Do you have any? Would appreciate your generous samples.
regards
Clement
Hi,
I think that your BlueSoleil (IVT) BT stack version is not supported, see this:
/discussions/board/message?board.id=connectivity&message.id=114
So you have to update your BlueSoleil BT stack.
Also you can try to use Microsoft BT (if Microsoft BT supports your BT hardware)...if you want to try, see this:
/discussions/board/message?board.id=pcsuite&message.id=11292&query.id=203856
Similar Messages
-
I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
ThanksYou are mixing up a couple of things here.
The TC drive cannot be partitioned without removing it.. did you do that?
If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC. -
Need to create high & low payment based on 20% down for both 36 and 42 month lease terms.
I have 3 different tables on my worksheet and need to formulate low and high payment scenarios for both 36 and 42 month lease terms based on 20% down. Help.
trods wrote:
Anyone?
Patience, trods. Remember that this is a user-to-user forum, and the participants arrive when they choose to or are able to, not according to a work schedule set by an employer.
On your question:
So far you have supplied two factors, and implied a third, that would affect the size of the payments to be made:
Total amount, downpayment as a percentage of the total amount, and the term on the agreement in months.
From that you want to calculate a "low payment scenario" and a "high payment scenario" for a term of 36 months, and the same two scenarios for a term of 42 months.
Missing from the data is whatever factor determines how a "low payment scenario" differs from a "high payment scenario." What's missing?
Regards,
Barry -
I have Photoshop Elements 12 for both PC and Mac (I use both). I have a new camera, Nikon D810. I downloaded the latest version of Camera Raw, 8.8. My D810 is listed as a supported camera model. However, when I try to open a raw photo in Photoshop Elements, I keep getting the message "Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. I have tried reinstalling Camera Raw many times, and have tried to open many different raw files in Elements, and still get the same error message. Please help.
How did you try to install ACR 8.8. The only way I know of that works with Elements is to use the Updates Choice on the Help menu.
There are two charts supplied by Adobe that explain your RAW dilemma. This one tells you what your camera needs: http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html This one tells you what version of software you need: http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
In your case, the Nikon D810 needs Adobe Camera Raw (ACR) 8.6 or Lightroom 5.6. (Congratulations on buying a new camera!)
To get to that level with Photoshop Elements, you will need to replace your Photoshop Elements 12 with version 13. Adobe caps ACR updates on version 12 at 8.5.
The most convenient way to get around it without spending any money is to use the FREE from Adobe DNG Converter. Download and install it from here for FREE: http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5855&fileID=5890 Once it is installed you can convert your D810 raw files to an Adobe RAW version with the .DNG file extension that most, if not all, versions of the various Adobe software programs can use. That includes old versions of Photoshop, Elements and Lightroom. DNG converter can be used as the tool to move your files from your memory card to your computer, is efficient, will convert in batches and is completely lossless. There is no risk of any image quality degradation or RAW functionality. -
I follwed all the instructions on manuals for both iPAD and iTunes re syncing, but after physically connecting iPAD with iMac with USB or via WiFi I still cannot find "phone button" under Device name on iTunes page. Please help! Thanks!
I have been creating a photo book using a lots of photographs on iPhoto, and then I took another photos by using new iPAD which I want to integrate with the original album/book on iMac. I was able to import them from iPAD's iPhoto to iMac's iPhoto. However I cannot import or transfer or sync anything from iMac's iPhoto to that of my iPAD.
So my iPhoto page on iPAD contains only 3 or 4 newly created albums, and no other info. That means no syncing....
I am supposed to be able to work on this project on either of these iPAD and iMac, correct?
I am puzzled. I appreciate for your advice and help.
Thank you!It doesn't appear under the iPad device on the left-hand sidebar of iTunes, you need to select the iPad device on the sidebar and then select the Photos tab on the right-hand side of iTunes e.g.
And then on the right-hand side : -
Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re
Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help............... -
Use Sign.xml and Encrypt.xml for both request AND response within WSDL?
Hi,
ALSB: 2.6
I was wandering if it's possible to use abstract outof the box WS-Policy file within WSDL file to specify encryption
(Encrypt.xml) and digital signature(Sign.xml) with X509 for both request and response???
So far, it only works for either request or response BUT not both. i.e. within WSDL file
<!-- following WSDL works for encrypting and signing request with X509 in test console -->.....
<wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
<wsdl:operation name="Message">
<soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
<wsdl:input>
<!-- WS-Policy file applied here -->
<wsp:Policy>
<wsp:PolicyReference URI="policy:Sign.xml"/>
<wsp:PolicyReference URI="policy:Encrypt.xml"/>
</wsp:Policy>
<soap:body use="literal" />
</wsdl:input>
<wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
Or
<!-- following WSDL works for encrypting and signing response with X509 in test console -->
<wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
<wsdl:operation name="Message">
<soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
<wsdl:input>
<soap:body use="literal" />
</wsdl:input>
<wsdl:output>
<!-- WS-Policy file applied here -->
<wsp:Policy>
<wsp:PolicyReference URI="policy:Sign.xml"/>
<wsp:PolicyReference URI="policy:Encrypt.xml"/>
</wsp:Policy>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
But not both
<!-- following WSDL doesn't work for encrypting and signing both response and request with X509 in test console -->
<wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
<wsdl:operation name="Message">
<soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
<wsdl:input>
<!-- WS-Policy file applied here -->
<wsp:Policy>
<wsp:PolicyReference URI="policy:Sign.xml"/>
<wsp:PolicyReference URI="policy:Encrypt.xml"/>
</wsp:Policy>
<soap:body use="literal" />
</wsdl:input>
<wsdl:output>
<!-- WS-Policy file applied here -->
<wsp:Policy>
<wsp:PolicyReference URI="policy:Sign.xml"/>
<wsp:PolicyReference URI="policy:Encrypt.xml"/>
</wsp:Policy>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
... Instead, I got error message like
<15/01/2008 10:15:04 AM NZDT> <Error> <ALSB Security> <BEA-387023> <An error ocurred during web service security inbound response processing [error-code: Fault
, message-id: 3917705281899426819-4368b1eb.117762cff6e.-7fdb, proxy: DexServiceX509-Stub/Proxy Services/DexServiceX509-ProxyService, operation: Message]
--- Error message:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Header/><soapenv:Body><soapenv:Fault><faultcode>soapenv:Server</faultcode>
<faultstring>Failed to get token for tokenType: http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3</faultstring></soapenv:Fa
ult></soapenv:Body></soapenv:Envelope>
weblogic.xml.crypto.wss.WSSecurityException: Failed to get token for tokenType: http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#
X509v3
at weblogic.xml.crypto.wss.SecurityBuilderImpl.addEncryption(SecurityBuilderImpl.java:308)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processConfidentiality(SecurityPolicyDriver.java:280)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:75)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:64)
at weblogic.wsee.security.WssServerHandler.processOutbound(WssServerHandler.java:86)
Truncated. see log file for complete stacktrace
>
<15/01/2008 10:15:24 AM NZDT> <Error> <com.bea.weblogic.kernel> <000000> <Failed to build CertPath
java.security.cert.CertPathBuilderException: [Security:090603]The certificate chain is invalid because it could not be completed. The trusted CAs did not inclu
de CN=x509,OU=x509,O=x509,L=Wellington,ST=Wellington,C=NZ.
at weblogic.security.providers.pk.WebLogicCertPathProviderRuntimeImpl$JDKCertPathBuilder.engineBuild(WebLogicCertPathProviderRuntimeImpl.java:669)
at java.security.cert.CertPathBuilder.build(CertPathBuilder.java:194)
at com.bea.common.security.internal.legacy.service.CertPathBuilderImpl$CertPathBuilderProviderImpl.build(CertPathBuilderImpl.java:67)
at com.bea.common.security.internal.service.CertPathBuilderServiceImpl.build(CertPathBuilderServiceImpl.java:86)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
Truncated. see log file for complete stacktrace
>
<15/01/2008 10:15:24 AM NZDT> <Error> <ALSB Security> <BEA-387022> <An error ocurred during web service security inbound request processing [error-code: Fault,
message-id: 3917705281899426819-4368b1eb.117762cff6e.-7fd8, proxy: DexServiceX509-Stub/Proxy Services/DexServiceX509-ProxyService, operation: null]
--- Error message:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Header/><soapenv:Body><soapenv:Fault xmlns:wsse="http://docs.oasis-open.or
g/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"><faultcode>wsse:InvalidSecurityToken</faultcode><faultstring>Security token failed to validate. weblo
gic.xml.crypto.wss.SecurityTokenValidateResult@3c5347b[status: false][msg [
Version: V1
Subject: CN=x509, OU=x509, O=x509, L=Wellington, ST=Wellington, C=NZ
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 1024 bits
modulus: 13052787793731294943682394984664645854838424340012907077330623....
The 'System Error Handler' from 'Invocation Trace' in ALSB test console is something like
[pre]
$fault:
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-386201</con:errorCode>
<con:reason>
A web service security fault
occurred[{http://schemas.xmlsoap.org/soap/envelope/}Server][Failed
to get token for tokenType:
http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3]
</con:reason>
<con:details>
<err:WebServiceSecurityFault
xmlns:err="http://www.bea.com/wli/sb/errors">
<err:faultcode
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
soapenv:Server
</err:faultcode>
<err:faultstring>
Failed to get token for tokenType:
http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3
</err:faultstring>
</err:WebServiceSecurityFault>
</con:details>
<con:location>
<con:path>response-pipeline</con:path>
</con:location>
</con:fault>
So is this a feature not supported in ALSB 2.6 yet or am I missing something dead simple?
Thanks in advance
SamInstead of specifying policies for input and output separately you could place the policy reference only once in the operation element. Maybe will this solve your problem...
http://e-docs.bea.com/alsb/docs26/security/ws_policy.html#wp1061166 -
BAPI for return/supplement the funds for both overall and fiscal year.
I have a development requirement for following and I am new to Investment ,management and Project
Systems functionality.
Your help will be appreciated
The new transaction will use the upload data to create returns and/or supplements to Marketing budgets. The following is what the transaction will do per request:
Verify funds are available to shift. The program will do this by creating an error log for items that do not meet this criteria. The program will process all line items that have available funds (IM52).
Q pls let me know what BAPi/FM to use to verify whether funds are vailable or not
Return the funds for both overall and fiscal year (IM52).
Q Pls tell me BAPI for same
Supplement the funds for bother overall and fiscal year (IM52).
Q BAPI for same
Deactivate the availability control for the WBSEs affected (CJBW).
Q How to do that and BAPI/FM for same
Activate the availability control for the WBSEs affected (CJBV).
Q How to do that and BAPI/FM for same
Add appropriate text from the data in the upload spreadsheet (this may be a concatenation of data from the columns in the upload) (IM52).
Not clear what user is trying to say
The transaction needs to be able to handle whole dollars as well as numbers that might include up to two decimals: e.g. .01 (IM52).I am answering my own question since i completed the above development by using the FM KBPV_POST_DATA .
It will post to all the BP tables and is tested successfully. -
Data Doubler - Format for both OSX and Windows 7 to read/write?
Hello! I have a Mid-2012 MacBook Pro 13" and I've ordered the OWC Data Doubler with a 1.5TB HDD to put into the optical bay. I have a couple of questions.
1. What format should I use for the HDD to allow both my OSX and Windows 7 sides read and write to it? I have a Bootcamp partition, but if it's possible I'd like for both OSX and W7 to be able to read and write to this drive. That way, when I'm in OSX I can view iTunes and media, but if I'm in W7 I can still have the same access. That way, I don't have to worry about "Oh, I downloaded this on the windows side ... I have to figure out how to get it over to the mac side" (or vice versa). Essentially allowing the 1.5TB HDD to be a "go between" for the two.
2. This is a minor question, but will the eject button do something to the HDD if it gets pressed when the optical drive is out and the HDD/Data Doubler is in? I don't plan on pressing it, but I was wondering if I need to dig into terminal (or somewhere else) to "disable" the button or maybe just reassign it so that instead of ejecting it does some other function?
I have heard of "MacDrives" for Windows, but I haven't used it. If this is a better option (to put the HDD into Mac OS Extended Journaled and use an application to allow W7 to read/write) that's fine.
I am putting in the 1.5TB HDD. The end goal, if possible, is to allow the Windows 7 side to read/write to it. As long as it's not a "hacked together" method, I do not mind what way it's done.
Any thoughts? I appreciate it!Use Winclone for the Windows partition and CCC for the OSX partition.
-
My email (sign-in) and password for iTunes is different than my email (sign-in) and password for iCloud. How do I change my sign in and password so they are the same for both iTunes and iCloud without losing my iTunes content?
Hey Lakedrive442,
It sounds like you have changed your Apple ID which you use with iTunes. If so there are several places you may need to update it as outlined in this article.
Apple ID: What to do after you change your Apple ID - Apple Support
Of course some might not apply, but many might.
Thank you for thinking of Apple Support Communities for your support needs.
Nubz -
Updated 2.3.3 for both x10i and x10a (ALL KITS)
Updated 2.3.3 for both x10i and x10a (ALL KITS)
http://www.topsony.com/forum/local_links.php?catid=4556
download FlashTool
http://forum.xda-developers.com/showthread.php?t=920746
or
http://androxyde.github.com/Flashtool/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)
Solved!
Go to Solution.this is how to add more Internal Memory it's a long process but its worth it
1) backup everything (Check above)
2) backup your SD card
on your PC
1) open any folder -> click on tools -> properties -> view -> show hidden files
2) mount the SD card, go to your SD card, press Ctrl + A then Ctrl C, on your desktop create a new folder, open it, then press CTRL + V
now this is where it gets AWEOME-ER
Guide to using Link2SD on your Xperia smartphone
This guide may seem lengthy, but trust us when we say it is straightforward. All steps have been documented which makes it look daunting. Read each section carefully and follow the steps outlined to install Link2SD.
1. PREPARATION
Please make sure you have completed all of the following before starting the tutorial.
On your PC:
– Install the necessary drivers for your Xperia smartphone onto your PC/laptop. The easiest way to do this is to ensure that Sony Ericsson PC Companion is installed on your PC. Once installed, connect your phone to complete the process.
– Download and install MiniTool Partition Wizard onto your PC or laptop.
On your Xperia:
– Enable USB de-bugging mode: Setting –> Applications –> Development –> Tick ‘USB debugging’
– Enable the ability to install unknown apps: Setting –> Applications –> Tick ‘Unknown sources’
– Install Link2SD from Android Market onto your Xperia smartphone. It is a free download.
2. ROOT
3. BACKUP MEMORY CARD
As we will be creating a partition on your microSD memory card, make sure you create a backup just in case anything goes wrong.
a) Create a new folder on your PC and name it anything you want, such as ‘SD_Backup’
b) Connect your phone to the PC, navigate to your memory card and copy the contents to the backup folder.
4. CREATE SECONDARY PARTITION
You now need to create a secondary partition on your microSD memory card that will enable you to use Link2SD.
Note: We will use MiniTool Partition Wizard to create a secondary partition on your microSD card. This partition can be ext2, ext3, ext4 or FAT32. We will use FAT32 as it is supported on all phones and should lead to less troubleshooting later. You can use any partition manager of your choosing, but the steps below guide you through MiniTool Partition Wizard.
There is no need to wipe your memory card when going through this process, just ensure you have at least 0.5GB to 1.0GB of free space to make it worthwhile. You also do not need to use a microSD card adaptor as the process below creates the partition whilst the phone is connected to your PC.
a) Connect your handset to the PC via USB and then launch MiniTool. You should see the details pop up under ‘Disk 2′.
b) Click on the memory card under Disk 2 in MiniTool and then in the left pane, press ‘Move/Resize Partition’. On the blue bar under ‘Size and Location’, move the right arrow towards the left to create the size of the secondary partition desired. In the example below we created a secondary partition with 1018.63MB of space. This value can also be typed in manually in ‘Unallocate Space After’.
c) Once this is done you should see that your memory card is now split into two partitions under Disk 2 of MiniTool. Right click this new partition and then press ‘Create’.
If you see this pop-up below, just press ‘Yes’ to continue.
d) You should then see this ‘Create New Partition’ window. Under ‘Create As’ click Primary and then under ‘File System’ click FAT32. Leave the cluster size as default and you can assign whichever drive letter you want. Once finished press OK.
e) This should bring you back to the main MiniTool screen. Now hit the ‘Apply’ button on the top-left of the screen, denoted by a tick symbol.
This will bring up another pop-up window and will take several minutes to both resize and create the secondary partition.
If successful, you should see message below. Congratulations your card is ready to use in conjunction with Link2SD.
5. LINK2SD
This application makes it easy for users with root privileges on their phone to move applications to the SD card.
a) Open the Link2SD app on your phone. You should be greeted with the following menu, check the FAT32 option and click OK.
You will then see the Superuser Request, click ‘Allow’.
Once you see the following message, restart your phone. The app should now be ready to use.
b) To make sure everything is installed correctly. Click the Menu button and go to ‘Storage Info’. This will show you the internal memory and your two partitions on the memory card. In our case, you can see that the second partition has 1GB free.
c) Now you need to move the apps of your choice to the memory card. Click the Menu button and press ‘Multi-select’.
Choose which apps you want to move by clicking the tick box next to the app. System apps are greyed out and cannot be selected. Link2SD can only move apps that are already on the internal memory. If you have apps already on your SD card, you will need to move them back to the internal memory before you can link them with Link2SD.
If you want to move all of your apps, pressing the menu button will bring up another menu allowing you to do this.
d) Once you have chosen which apps you want to move, you then need to hit the menu button and press ‘Actions’, which will bring up the following menu. Press ‘Create Link’.
Leave all three check boxes ticked and press OK. Link2SD will now do its work and move/link the selected apps to your memory card.
Once finished, you should see that the apps you have moved have ‘Linked -> SD Card’ in red font in the Link2SD app list. Reboot your phone.
e) Congratulations your phone is now using Link2SD! You should now go to Settings by pressing the menu button and configure how you would like Link2SD to work. The main decision here is whether you want to Auto Link newly installed apps to the memory card. Given that you’ve gone through the hassle of installing Link2SD we suggest you enable Auto Link and make worrying about your internal memory a thing of the past.
Special Thanx to the Xperiablog
http://www.xperiablog.net/2011/12/12/link2sd-guide-never-worry-about-internal-memory-limits-again/ -
Hi,
During GR, GRC account is debited and during IR, GRC account is credited.
Now, when GRC account debited 1000 during GR, during IR time, the amount for GRC also 1000. Correct?
1 May I know where in the configuration to tell the system that GRC amount for both GR and IR must be the same?
2 Any possible that GRC amount for both GR and IR time different?
Thanks
RgdsHi,
GRC amount is GRC account is quantity x unit price ( say for eg: quantity 10,of its unit price). There are no config settings to make the GR and IR grc amount to be same. The thing is need to flow the same information in GR and IR . Ultimately no discrpencis will come. The disripencies in GRC amount during GR and IR may occue. Please refer below linik which will give you better clarity. Thanking you.
GRC clearing account
Edited by: Padmasri Garapati on Nov 4, 2011 11:50 AM -
Advice on improving graphics for app for both iPad and iPhone
I am creating an app for both iPad and iPhone 4 and it looks terrible on the iPhone 4.
I have created the Flash File in Flash CS5.5 IDE with Movie Size 1024 x 768 and I am using the following AIR for IOS settings:
Rendering: CPU
Device: iPhone and iPad
Resolution: High
All my graphics are vector so I assumed that it would look crisp on both devices. It is not as perfect looking on the iPad as it appears on my PC monitor but I can live with it. I can't however live with the iPhone 4 appearance.
I am therefore seeking advice on how to improve the iPhone 4 appearance.
As far as I am aware, there is not a way to use 2 sets of graphics, one for each device. Please correct me if this is wrong and it would offer me a solution.
Would doing all the graphics as PNG be a solution?
Btw I am using AIR 3.2 SDK if that has any relevance and my graphics are static.
Thanks in advance.Thank you for the swift reply Colin. I do not recall setting a stage.quality setting - is the default setting low?
I did a quick google search and see this appears to be the code I need. I assume I put this in the first frame of my Flash movie?
stage.quality = StageQuality.MEDIUM;
Thanks
Paul -
Since subscribing to iTunes match my ipad2 no longer offers the AirPlay option on the volume bar within Music, rendering my bowers Wilkins speakers useless for both iTunes and spotify. Why is this and how can I fix it?
Apple made no mention of this being an expected issue, so I can only assume it's unintentional. Otherwise I wouldn't have subscribed to Match in the first place!How big is your library? I would recommend the following troubleshooting steps:
- Backup your library. Always a good idea before messing with things.
- Create a new library. Refer to this article for details: http://support.apple.com/kb/HT1589. This won't delete your old library, you're just creating a new empty one. Also refer to this article to get back to your old library later.
- Add a few albums into this new library. Not everything, just a small sampling, as a test.
- Activate Match on this new library. You shouldn't have to re-pay, it should just say "Add Computer" or similar.
- At this point, Match should run again. With just a few albums it should complete in just a few minutes.
If iTunes doesn't crash at this point, then likely there's something about your original library that Match doesn't like - what that is I don't know, but at least you'll know it's not your PC. If iTunes still crashes, then if could be a number of other things, but probably not your library. My next suggestion (if you haven't already done this) is to uninstall / reinstall iTunes. If that doesn't work, then my next ideas you won't like. -
One RTPManager for both, receiving and transmitting
Can I use one RTPManager for both, receiving and transmitting media data?
I would create send stream and imlement appropriate update+ methods.
Will it work?
Regards!Ummm, you don't have to implement any methods if you don't want. The default RTPManager does it all for you. I think you may want to override some trigger functions, but...
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/AVTransmit.html]
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/AVReceive.html]
Maybe you are looking for
-
I was unable to view PDF files in Firefox and would get a blank screen telling me I needed to re-install Adobe. I did that and was still unable to view PDF files in the browser window or tab. Now that I have upgraded to the most current version of Fi
-
Error 1015 when upgrading from 3.0 to 3.0.1
Hello, I recently purchased an iPhone and my first time connecting it to iTunes it asked to upgrade from 3.0 to 3.0.1, which I assumed was fairly standard so I let it go. However, it made it about 75% through the progress bar on the iPhone display an
-
Hi eveyone. Mi question is: after that these next steps complete: Description of Data Flow: New purchase orders or requisitions in approved status. Snapshot does not contain that newly entered purchase order or requisition. The MRP_AP_xxxxx_V views d
-
Sorry, if my question is too wordy. First, the problem -- I am reading integers into my application and converting the those into strings using valueOf(). I then need to use those strings in a switch statment. The only way I could figure how to do th
-
Airport Express - Airtunes Audio Dropouts in client mode
The last week I spend trying many tips from this and other forums to get my Itunes running without dropouts, without any results. Heres a list what I did: Firmware downgrade to 6.1.1. Disabled IPv6 Increased Buffer Size in Itunes to BIG Let OnyX runo