Java sdk 1.4.2 Windows 2008 SAP ECC 6.0 SR3
Hello,
I want to install SAP ECC 6.0 SR3on server which is running windows 2008.
The operation system is 64 bit version with a Xeon processor.
I folow the following path to Download a j2sdk version http://java.sun.com/j2se/1.4.2/SAP/download.html.
Downloaded j2se v 1.4.2_17-x64 SDK (j2sdk-1.4.2-17-windows-amd64.exe).
When I installed This version of java. It seems to be OK, but after setting the envirnment variabeles path and Java_home, the java version is not working.
When I try to run SAPinst this error prompt u201CThe SAPinst could not started because a java runtime Environment (JRE) could not be found.
Please help me
Regards,
A3
Hi Bas,
What error you are getting?
Java version not working meand???????
Just install java, set JAVA_HOME, PATH variables and restart your server/system.
Then check and send us the result.
Regards
Similar Messages
-
How to Mount IBM Tape Drive on windows 2008 SAP Platform
Hi Expert,
What are the steps for Mount IBM Tape drive on windows 2008 SAP Platform on Sybase Database ?
After mounting IBM Tape Drive on windows 2008 SAP Platform , can i use this for Sybase Backup purpose from DBACOKPIT ?
Kindly reply me ASAP.Dear All,
Problem Solved by below activity :-
http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc38421.1572/doc/html/san1335472614455.html?resultof=%22%64%75%6d%70%22%20%22%64%61%74%61%62%61%73%65%22%20%22%64%61%74%61%62%61%73%22%20
1> dump database pubs2 to "\\.\TAPE0"
2> go
1> load database pubs2 from \\.\TAPE0
2> go
Please review any of these SAP Notes to see if you would be able to
setup dump/load and then copy to tape as an option.
1585981 SYB: Ensuring Recoverability for Sybase ASE (has some
comments about storing to tape drive)
1588316 SYB: Configure automatic database and log backups
1611715 SYB: How to restore a Sybase ASE database server (Windows)
1618817 SYB: How to restore a Sybase ASE database server (UNIX)
1887068 - SYB: Using external backup and restore with SAP Sybase ASE
Configuration DEVDB:
1> sp_config_dump @config_name='DEVDB' ,
2> @stripe_dir = "\\.\Tape0" ,
3> @compression = '101' ,
4> @capacity = '1520000040960' ,
5> @verify = 'header'
6> go
Configuration DEVLOG:
1> sp_config_dump @config_name='DEVLOG' with init,
2> @stripe_dir = "\\.\Tape0" ,
3> @compression = '101' ,
4> @capacity = '1520000040960' ,
5> @verify = 'header'
6> go
1> dump database DEV using config = 'DEVDB' with capacity = 87000000, init
2> go
1> dump transaction DEV using config = 'DEVLOG' with capacity = 87000000, init
2> go
and
1> dump database DEV to "\\.\TAPE0" with capacity = 87000000, init
2> go
1> dump transaction DEV to "\\.\TAPE0" with capacity = 87000000, init
2> go -
Why we have separate azure java SDK for linux and windows
I saw different links for downloading azure java SDK for linux and windows.
What difference does it actually have when java is platform independent? Or both are same jars?Hi,
Thank you for your post.
It contains the same jar files.
Regards,
Mekh. -
SAP ECC 6.0 SR3 Cluster failover not working in windows with DB2 UDB V9.1 F
Dear Expertise,
We have installed the SAP ECC 6.0 SR3 High Availability with DB2 UDB V9.1 FP5 in windows cluster environment.
We have installation following instances on nodes 1 and 2.
Node 1
DB2 database software
Central service instance for ABAP Installation on Shared drive G:
First MCSC node to create a cluster group u201Cpdssapgrpu201D
Database group u201Cpgsdbgrpu201D(Shared Drive)
Enqueue replication service
CI (central instance)(local Drive)
Node 2
DB2 database software
Additional cluster node
Enqueue replication service
DI(dialog instance)(local Drive)
I can login into the system using both CI and DI.
if my SAP Cluster group is moved from one node to another i can still login into the system
But when my DB2 group is moved from node A to node B my SAP services are getting closed
and i am getting the message database not found
so please Guide me as soon as possible Friends.
Thanks and Regards,
Ravindra
Edited by: Ravindra Bade on Mar 6, 2009 10:22 AMHi Ravidra
Have u solved the probelm I also have the same problem when i move the groups from node1 to node2 manually my 2 servrces 00 and 01 are failed not able to bring up again. If You solve the problem please guide me the solution to solve this.
THanks in advance -
Operating system VERSION incompatability while installing SAP ECC 6.0 SR3
<h3>what is the dump of M.S. SQL SERVER required for installing SAP ECC 6.0 SR3 ABAP system on WINDOWS SERVER 2008 R2 ENTERPRIZE 6.1 VERSION.</h3>
we installed the MS sql version: 10.50.1702 (dump number 51039339) on our Operating system version was Windows Server 2008 R2 enterprise (version 6.1) and while we are trying to install sap using SAP INST we got one high priority prerequisites analysis message saying
<h3> MESAGE "The following operating system versions is supported: windows server 2003(i.e version 5.2) and Windows server 2008(ie 6.0). current oprating version: version 6.1 service pack 0.0"
Can any one help me what is the problem, Is it the operating system or with the MS SQL server and please tell me what we should do in order to rectify this issue</h3>
Please also tell me how to check COMPATABILITY between OS, DATABASE and SAP. we have gone through PAM but not able to find. Can any one help me.mahesh.boby63 wrote:
> Why we sholud go for modified kernel DVD procedure on windows server operaating system ?
It's not about 'windows' server, but for 'windows 2008 R2' server.
Kernel files included in the 'Installation Media' are by default the old/low patch level not released fully compatible with 'new platforms' like 2008 R2 - which may cause some problems 'during' installation as well.
So, using modified kernel DVD you get two advantages -
1. You are able to avoid 'those' problems during installation.
2. You don't have to go for an explicit kernel upgrade just after the installation.
Thanks -
SAP ECC 6.0 SR3 Cluster failover not working in AIX with DB2 UDB V9.1 FP6
Hi Gurus,
We have installed the SAP ECC 6.0 SR3 High Availability with DB2 UDB V9.1 FP6 in AIX cluster environment.
After installation we are doing the cluster fail test.
Node A
Application Server
Mount Points:
/sapmnt/<SID>
/usr/sap/<SID>
/usr/sap/trans
Node B
Database Server
Mount Points:
/db2//<SID>
The procedure followed to do the cluster failover:
We have down the cluster on Node A and all the resources of the Node A has been moved to Node B.
On Node B when we issued a command to start the SAP. It says u201Cno start profiles foundu201D
WE have down the cluster on Node B and moved the Resource from Node B to Node A . There the db2 User IDu2019s are not available. We have crated the user Idu2019s manually on Node A. however it did not work.
Please suggest the procedure to start the sap in cluster failover.
Best Regards
SijaHi Sija,
Can i have detailed scenario in your cluster configuration.
Means you are saying that going to start cluster package manually, if it is right please make sure that you had the same copy of start, instance profiles of NodeA to Node B. Means you need to maintain two startup, two instance profiles for both nodes. In a normal situation it will picik the profile of node A to start databse from A node. But in a failover situation it will not pick node A profile to start, it should pick Node B s profiles.
Just make a copy from node A and change the profile name accordingly to Node b. Then try to restart.
Regards
Nick Loy -
Java app on 64 bit Windows 2008
I need help finding the solution to a problem that I'm having with an java application that I'm running on 64 bit Windows 2008 Server for a P to V, physical to virtual server migration. My application has been running fine on Windows 2003 32 bit OS. Windows 2008 Server seems to be causing my applicaton to issue file copy errors (null value) for a text file that is a basic listing of a directory, nothing large or arcane. Also, the application does not move files from folders designated in the properties file. I gave admin access to all resources the application requires. I'm stuck at a standstill. I installed jdk1.6.0_26 and modified the PATH environment variable by adding the following: C:\Program Files\Java\jdk1.6.0_26\jre . I also installed the 32 and 64 bit version of jre 6_26 to no avail. Any and all suggestions are welcome. Thanks.
user7356290 wrote:
I need some clues like what .dll's should be registered throught the Windows GAC. That has absolutely nothing to do with the problem you described.
You stated that your application is running.
If a dll fails to load then you will get an exception that specifically indicates something like that or optionally you will get some horredous exception that means nothing. Or the VM will not run at all.
And unless your java code is eating exceptions you are not getting any exceptions. If your code is doing that then your java code is wrong and the solution is to fix the java code so it does report the exceptions.
Presuming that you are not eating exceptions and that you are not getting exceptions, since you didn't state you had any, it means it has nothing to do with dlls.
It could be a permission problem, but that would again suggest that you are eating exceptions. -
Add-On in installed SAP ECC 6.0 SR3
Hi All,
I have installed ECC 6.0 SR3 with ABAP+JAVA (MI usage type) on Window 2K3 64bit R2. Now i want to add DI add-on in installed SAP system. How can i add this add-on in SAP system.
regards,
majamilHi Markus,
When i run SAPInst then there is no option of additional usage type in SAP NetWeaver 7.0 Support Release 3.
while SP level is 14 in my system. there are four option.
SAP NetWeaver 7.0 Support Release 3.
1. SAP Systems
2. Standalone Engines
3. Optional Standalone Units
4. Software Life-Cycle Options
4.1 Additional Preparation Options
.Operating System Users and Groups
.Prerequisites Check
regards, -
Can I really Install SAP ECC 6.0 SR3
Hello Experts,
I have a question, I am an amateur and need your expert advice regarding installation of SAP R3 on my laptop. My question is that If I install SAP on my laptop would I be able to practice it anywhere even without the Internet? I am new in SAP FICO and willing to give all my time to learn it. I have 12 points in my account(not a lot I know, but that's all I have), I'll give all these points to someone who can take this time out and explain me how do I do this.
I have Windows 7
Ram 4 GB
HDD 320 GB
Apart from the points, I would really appreciate your help on this.
Peace,
NickWell don't worry you don't have to sacrifice your pionts
Hope you are aware that you can download trail versions of various SAP Netweaver releases here [Downloads|http://www.sdn.sap.com/irj/scn/nw-downloads].
Am not really sure how helpful they could be for practicing FICO, as these trail version may not contain most of the standard SAP transactions.
Another option is to install a IDES, which is definitely possible for the configuration you have in your laptop. You may have to look around in your area where you can get it installed . (Should be easy if you are in India).
Vikranth -
Issue about BI JAVA SDK-SOAP request failed with return message 2147483653
Dear Experts,
I'm trying to use BI JAVA SDK to connect BW by using XMLA connector.
But there's an error messaet said :
SOAP request failed with return message 2147483653 ( Invalid MDX command with INCLUDING)
I'm really new to this JAVA SDK, and after searching help in SAP Service Market and Google, there's no helpful suggestion.
please help me about how to fix this error.
Here is my code:
IBIConnection connection = (IBIConnection) cf.getConnectionEx(cs);
IBIOlap olap = connection.getOlap();
Cube cube = olap.getObjectFinder().
findCubeFirst((String)null, "ZFI_C11/ZFI_C11_Q001");
// This is just a sanity check to verify that the
// cube on which this example relies was retrieved
if (cube==null){
System.out.println("no cube found");
// Didn't print out this message, seems it can connect to BW and get the InfoCube and Query.
Dimension plantDimension = olap.getObjectFinder().
findDimensionFirst(cube, "ZPLANT");
Dimension materialDimension = olap.getObjectFinder().
findDimensionFirst(cube, "ZMATERIAL");
IBIQuery query = olap.createQuery(cube);
IBICommandProcessor commandProcessor = query.getCommandProcessor();
commandProcessor.moveDimensionToRows(plantDimension);
commandProcessor.moveDimensionToRows(materialDimension);
IBIDataSet dataset = query.execute(); // After execute this statement, error happens.
Thank you!
AndySolved myself, it's because the query used in my code have user input variable.
-
BI Java SDK: Bex query in Webdynpro java
Hi,
I want to know is it possible to view a Bex query output
in a webdynpro java application. There is a Bex query defined i just want to get the report of this query or atleast the output of this query. Also how will be the output structure? i am not familier to BI plz help. I did go though BI SDK documentation but did not help
VinayHi Vinay,
The BEx query output in webdynpro is with help connectors. the connector SAP query which you were speaking about is one of the four options. I hope this is the link what u were refering to link:[http://help.sap.com/saphelp_nw04/helpdata/en/6e/011e681cf74ab4b3acf73f77653405/frameset.htm]
SAP Query is a component of SAP's Web Application Server that allows you to create custom reports without any ABAP programming knowledge. The BI SAP Query Connector uses SAP Query to allow applications created with the BI Java SDK to access data from these SAP operational applications.SAP Query offers users a broad range of ways to define reports and create different types of reports such as basic lists, statistics, and ranked lists.
It would be a better option if with JDBC connector because that worked for me in extarcting data from a different source system.BI JDBC Connector is aslo used to make these data sources available in BW, via BW's UD Connect.
For the WD code i need to check.
Please tell me if its helpful.
Regards,
Shaila. -
Diff in SAP ECC 6.0 and Netweaver
Hi Experts,
I am working as SAP ABAP Consultant.
I am new to SAP Netweaver with JAVA. I want to Learn SAP with JAVA also.
Can any one tell me whether the SAP 6.0 is used for SAP NetWeaver developement with java
or it needs some more than SAP ECC 6.0 for ABAP.
Which java is used mostly in SAP?
How to start learn JAVA for SAP?
Awaiting helpful reply
Thanks In advance,
DhanuHi Dhananjay,
The SAP NetWeaver Application Server (SAP NetWeaver AS) defines the runtime environment both for Java- and ABAP-based applications in SAP NetWeaver. We refer to the Java-related parts of the server as SAP NetWeaver AS Java. The main part of SAP NetWeaver AS Java is the SAP J2EE Engine, a complete runtime system that can host applications in compliance with the J2EE 1.3 standard.
The SAP J2EE Engine supports all the techniques that became popularized by J2EE - JavaServer Pages, servlets, Enterprise JavaBeans (EJBs), etc. - so that applications can be ported with minimal effort to SAP NetWeaver AS Java. However, SAP NetWeaver AS Java offers additional functionality on top of what is required in the J2EE 1.3 standard.
Where should I store database tables of my combined ABAP/Java system?
The important information here is: Please keep the database storage of your Java- and ABAP-based components separate:
ABAP components access database tables stored in the ABAP database schema.
Java components access database data stored in the Java database schema.
Best, there is one database instance keeping both ABAP and Java schemas, namely the database instance that is already pre-configured during the SAP Web AS installation.
Can my Java program modify data in the ABAP database schema?
The important constraint is: In general, Java components do not access tables stored in the ABAP schema directly, via persistence APIs (for example, JDBC). Analogously, ABAP components cannot manipulate data in the Java schema.
Dont worry: Of course, Java components can read or modify data in the ABAP schema. But rather than accessing table data directly, they are intended to go around: In the Java code, you apply the application-level APIs (like SAP Java Resource Adapter API, web services, Adaptive RFC for Web Dynpro UIs) and ask the ABAP component to do the work on the database.
Can I integrate Java and ABAP components in the scope of an application?
Of course, you can combine Java and ABAP components in your systems. There are several technologies enabling reliable data exchange between them, like SAP Java Connector (SAP JCo), SAP Java Resource Adapter (SAP JRA), web services, and SAP Exchange Infrastructure (SAP XI) to name some.
The below link helps u in understanding the connectors of java and sap.
[http://help.sap.com/saphelp_nw04/helpdata/en/6f/1bd5c6a85b11d6b28500508b5d5211/content.htm]
Using the SAP Java Connector
SAPs new Java middleware, the SAP Java Connector (JCO) allows customers and partners to easily build SAP-enabled components in Java. JCO supports both inbound (Java calls ABAP) and outbound (ABAP calls Java) calls in desktop and server applications.
In this Sample Program we connect to SAP and call two BAPIs.
Import statements: Any program using JCO should contain the following import statement:
import com.sap.mw.jco.*;
Otherwise, you have to fully qualify each class and interface which is very inconvenient.
Connecting to SAP
JCO.Client mConnection;
A connection (or session) with SAP is handled by class JCO.Client
try {
mConnection =
JCO.createClient("400", // SAP client
"c3026902", // userid
"********", // password
"EN", // language
"iwdf5020", // host name
"00"); // system number
mConnection.connect();
catch (Exception ex) {
ex.printStackTrace();
System.exit(1);
"A Client object is created via a call to createClient(). You can use a specific application server (as in the above code) or a server group (load balancing)." REFER the JCO Javadoc for the overloaded createClient() method for the latter possibility.
"The Client class's connect () method tries to log on to SAP. If that fails for any reason, an exception is thrown. If the call succeeds, we can now stay connected for as long as we like. When we are done, we can call disconnect () to explicitly log off."
Thankyou
Regards. -
Bank Statement management in SAP B1 on a VMWare Windows 2008 server
Hi everybody,
One of our customer is using a VMWare Windows 2008 server with SAP B1.
Actual version of Business One is SBO 2007A PL 00 PL 15 (SQL Server 2005).
Since the installation of this server using VMWare, we encouter problems using the SAP B1 Integration Platform for the process of the bank statements.
Everything including bank statements transfer was working very fine on a "real" server before new implementation.
When trying to open the Integration Platform Control Center on the server, we now receive the following message regarding JAVA.
"JAVA Virtual Machine Launcher : could not find the main class : program will exit."
JAVA is well installed on the VMWare server.
We have searched for a solution on the Web and it seems that JAVA and VMWare are not compatible. Does anybody have any information about that ?
Does anybody already have this problem with Integration Platfom on VMWare server ?
Is there a solution to our problem ?
Thanks for all your contributions.
Best regards.
MichelHi Michel,
First of all, your PL is too low. AFAIK, the first supported PL for 2007A SP00 is PL30. You may upgrade your PL first to see if that is a bug or not.
Thanks,
Gordon -
Which files are require for sap IDES ecc6.0 ehp6 with windows 2008 and db2 LUW 10.1
Hi professionals,
Please help me out which file are require to download for SAP IDES ecc6.0 ehp6 with windows 2008 and db2 LUW 10.1
My requirement is to install Windows2008 R2 Service pack 1 + ECC6.0 ehp6 + DB2 LUW
So according to this i found these files,please tell me which one i require. second thing i am not able to find instalation master DVD in it.So which file is best for my environment.
51044815_1 BD IDES SAP ERP 6.0 EHP6 Inst. Export 1 of 40
51041991_1 BS2011 Java Components - NW 7.03 1 of 4
51041992 SAP ERP 6.0 EHP6 Components
51041988_6 NW703 UC-Kernel 720_EXT Windows Server on x64 64bit
51041988_5
NW703 Kernel 720_EXT Windows Server on x64 64bit
51041988_7
SL CONTROLLER 700
51041988_8
SL CONTROLLER 720
51041991_1
BS2011 Java Components - NW 7.03 1 of 4
51048277_3
721 NUC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_6
721 UC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_7
SL CONTROLLER 700 for SWPM SP06
51048277_8
SL CONTROLLER 721 for SWPM SP06
51048285_2
721_EXT NUC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_4
721_EXT UC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_5
SL CONTROLLER 700 for SWPM SP06
51048285_6
SL CONTROLLER 721 for SWPM SP06
51048532
DB2 LUW 10.1 FP4 RDBMS Windows x64
51048533
DB2 LUW 10.1 FP4 RDBMS CLI/JDBC-Driver
51041988_9
DB2 USER ENV
51041988_11
DB6 USER ENV
51041988_10
DB4 USER ENV
Thanks & Regards,
Bhipra SaktiHi Bhipra,
You need below DVDs for ERP 6.0 EHP6 IDES
51041985_11
DB2 USER ENV
70SWPM10SP06_4-20009707.sar
70SWPM10SP06
51044815_1
BD IDES SAP ERP 6.0 EHP6 Inst. Export 1 of 40
51044815_10
BD IDES SAP ERP 6.0 EHP6 Inst. Export 10 of 40
51044815_11
BD IDES SAP ERP 6.0 EHP6 Inst. Export 11 of 40
51044815_12
BD IDES SAP ERP 6.0 EHP6 Inst. Export 12 of 40
51044815_13
BD IDES SAP ERP 6.0 EHP6 Inst. Export 13 of 40
51044815_14
BD IDES SAP ERP 6.0 EHP6 Inst. Export 14 of 40
51044815_15
BD IDES SAP ERP 6.0 EHP6 Inst. Export 15 of 40
51044815_16
BD IDES SAP ERP 6.0 EHP6 Inst. Export 16 of 40
51044815_17
BD IDES SAP ERP 6.0 EHP6 Inst. Export 17 of 40
51044815_18
BD IDES SAP ERP 6.0 EHP6 Inst. Export 18 of 40
51044815_19
BD IDES SAP ERP 6.0 EHP6 Inst. Export 19 of 40
51044815_2
BD IDES SAP ERP 6.0 EHP6 Inst. Export 2 of 40
51044815_20
BD IDES SAP ERP 6.0 EHP6 Inst. Export 20 of 40
51044815_21
BD IDES SAP ERP 6.0 EHP6 Inst. Export 21 of 40
51044815_22
BD IDES SAP ERP 6.0 EHP6 Inst. Export 22 of 40
51044815_23
BD IDES SAP ERP 6.0 EHP6 Inst. Export 23 of 40
51044815_24
BD IDES SAP ERP 6.0 EHP6 Inst. Export 24 of 40
51044815_25
BD IDES SAP ERP 6.0 EHP6 Inst. Export 25 of 40
51044815_26
BD IDES SAP ERP 6.0 EHP6 Inst. Export 26 of 40
51044815_27
BD IDES SAP ERP 6.0 EHP6 Inst. Export 27 of 40
51044815_28
BD IDES SAP ERP 6.0 EHP6 Inst. Export 28 of 40
51044815_29
BD IDES SAP ERP 6.0 EHP6 Inst. Export 29 of 40
51044815_3
BD IDES SAP ERP 6.0 EHP6 Inst. Export 3 of 40
51044815_30
BD IDES SAP ERP 6.0 EHP6 Inst. Export 30 of 40
51044815_31
BD IDES SAP ERP 6.0 EHP6 Inst. Export 31 of 40
51044815_32
BD IDES SAP ERP 6.0 EHP6 Inst. Export 32 of 40
51044815_33
BD IDES SAP ERP 6.0 EHP6 Inst. Export 33 of 40
51044815_34
BD IDES SAP ERP 6.0 EHP6 Inst. Export 34 of 40
51044815_35
BD IDES SAP ERP 6.0 EHP6 Inst. Export 35 of 40
51044815_36
BD IDES SAP ERP 6.0 EHP6 Inst. Export 36 of 40
51044815_37
BD IDES SAP ERP 6.0 EHP6 Inst. Export 37 of 40
51044815_38
BD IDES SAP ERP 6.0 EHP6 Inst. Export 38 of 40
51044815_39
BD IDES SAP ERP 6.0 EHP6 Inst. Export 39 of 40
51044815_4
BD IDES SAP ERP 6.0 EHP6 Inst. Export 4 of 40
51044815_40
BD IDES SAP ERP 6.0 EHP6 Inst. Export 40 of 40
51044815_5
BD IDES SAP ERP 6.0 EHP6 Inst. Export 5 of 40
51044815_6
BD IDES SAP ERP 6.0 EHP6 Inst. Export 6 of 40
51044815_7
BD IDES SAP ERP 6.0 EHP6 Inst. Export 7 of 40
51044815_8
BD IDES SAP ERP 6.0 EHP6 Inst. Export 8 of 40
51044815_9
BD IDES SAP ERP 6.0 EHP6 Inst. Export 9 of 40
51048277_6
721 UC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_8
SL CONTROLLER 721 for SWPM SP06
51048532
DB2 LUW 10.1 FP4 RDBMS Windows x64
51048533
DB2 LUW 10.1 FP4 RDBMS CLI/JDBC-Driver
Hope this helps.
Regards,
Deepak Kori -
Error: SAP installation of ERP Sr3 with ORACLE 10g on Windows 2008 server
Dear all,
while installaing SAP ERP SR3 with ORACLE 10g on windows 2008 server...
we are getting error as not support.
please confirm wether this version of OS is uspported or not.
thanking you in all,
by
Animeshactualy we tried to change Oraparam.ini file in the installation folder...
edited ... windows= 5.0, 5.1, 6.0
we had entered 6.0
Yes - that is necessary.
and started ... but after starting we are getting ERROR like unKNOWN and installation popup (OUI popup) exiting with .. error popup.
Yes - because Oracle delivers its own Java version - which is too old to run on Windows 2008.
if you suggest us to use 2003 64 bit for temporaray .... purpose.
and is there any specified procedure to UPgrade OS.
like... DB should be updated before OS upgradation.
You can run 10.2.0.4 on Windows 2003 x64 nicely and upgrade to Windows 2008. Since there is no "upgrade" (it is the highest version supported) there´s no need to do anything.
The question you have to ask is:
Why do you need Windows 2008? Is there any technical implication?
Markus
Maybe you are looking for
-
SharePoint 2010 - Content database contains orphaned items
Good day people! We have come across the feared "Content databases contain orphaned items"! Running a check on our farm shows: PS C:\Users\SPAdmin> Get-SPContentDatabase | ForEach-Object { $_.repair($false)} <OrphanedObjects Count="0" /> <OrphanedObj
-
Correct Safari Version For OS 10.3.9
I am running Safari 1.3.1 using OS 10.3.9 and have experienced several problems, such as the the inability to copy and paste images into other apps from Safari, invisibility of the find command, frequent crashes and increasing incompatibility with se
-
Task Manager and/or Grocery List application ideas?
Looking for Task Manager and Grocery List applications that will sync my Mac with my iPhone. Do you know of any? Zenbe is not really what I am looking for.
-
Micorsoft Error Report when installing itunes need!!!
I installed itunes the first time and everything ran smoothly. Then, my disc drive ceased to work and i could intsall, import or play nothing on my pc. This annoyed me somewhat so i attempted to fix it by using XP system restore to the point after i
-
Hi, I found the following command/line to manipulate message queue settings to display messages either in status bar or as alerts. But I am not sure how n where to use this. "qms$forms_errors.set_oracle_message_target" Can any one share more details