Java SE 6 runtime not updating properly after Mavericks update

Since updating my 27-inch Late 2009 iMac to Mavericks I have an update that will not process. I keep getting a Software Update notification that says, "To open "java" you need a Java SE 6 runtime. Would you like to install one now?" When I click "install", it begins the process and indicates that it gets about 40% into it and then responds that the network cannot be contacted at this time and that I should try again later. This has been going on for days now and pops up multiple times a day.

Same problem for me. I called Apple and they told me this is an old version of Java and that I should go to the Java web site and download the most current which I belive they told me was version 7. I did that, it seems to install properly but it did noting for stoppig this annoying popup window from appearing on a regualr baiss throughout the day. Additionally, I'm haing some programs telling me they can not run wothout the proper Java update which I can't seem to figure out which one is the proper update. I may add to this on Monday after I call Apple again and see if I can't get someone who kows what is going on. I had no warnings of this nature before Mavricks.

Similar Messages

Aluminum Wireless Keyboard not working properly after Firmware update 1.1

Hi,
Well, as the subject says, my keyboard is not working properly after I updated the firmware. The problem is that several keys (delete, down arrow, brackets and apostrophe) stopped working right after I installed the update. I never dropped it or hit it. And I did not stop or interrupt or did anything during the install. I take very good care of it.
I have already tried toubleshooting with the support page, restarting the iMac, taking off the batteries, setting it up with bluetooth again, going back a week with time machine and to reinstall the firmware. So, if you have something new for me to try, I will really apreciate it.
Thanks in advance.
Franco.

I have 24" iMac with the Apple wireless M&KB - I know this is basic but have you tried a fresh set of batteries? My KB will refuse to establish connection when batteries are on the weak side the firmware update may just be a co incidents. If your wireless mouse is working OK then I would guess the blue tooth is functioning.
Not sure about the 10.49 download - are your other file downloads completing properly? Are there any error messages?
Steve

ITunes / iPhone not working properly after newest update...

iTunes is not working properly after the newest update... It dosen't see my iPhone, the program acts very sluggish, and has trouble loading the Store. Anyone have a solution or an explanation? I have tried the suggestions found in other threads ie. restart, re-download, charge phone, restart phone and so on. Nothing works. Everything was working fine until iTunes and the new ios were installed. After that it all went to crap. Thanks, Randy...

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Printer is not working properly after I updated OS

My printer is not working after I updated my OS software. It will only print out pages as a mirror image. All the programs are not printing properly. Could really use some help fixing this issue.

What software did you update?
It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
Please describe in detail all you have attempted to do in order to resolve the issue. Have you contacted the printer manufacturer tech support? Read the printer's user manual? Your printer drivers updated to match your updated software?

Smart Actions not working properly after software update

My Razr updated 2 days ago and since then my Smart Actions are not working properly.
I have my Work action set to turn the volume down when I'm at a certain GPS. It shows that "Work" is active, but doesn't turn the volume down.
Also, there are times (since I've owned the phone) that it will not connect to the network after coming off a Wifi Connection without rebooting the phone. I took it into a Verizon store and they did a hard reset, and that fixed it for a time, but it started doing it again.
Any help appreciated.

Hi mcclainkb, Let's make sure your phone works as you expect it to! Have you tried removing the Smart Action and setting it back up again? Are your other GPS services working as normal? After the hard reset performed in the store did you install all of the same application that you had before?
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

Ipad2, safari does not work properly after ios6 update. How do I fix it?

I need help in fixing safari problems after ios6

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you mean by not working properly? Explain in detail.
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT

Netflix not working properly after ATV update

After the update, movies at netflix after some seconds, video starts from the beginning and audio still plays normal.
Can't see anything like that. Have to fast forward so video comes back to original point.
Can you guys help me out?

If the update does not work for you then do as I explained in my previous post and roll back to the previous driver. That philosophy can be applied to all updates.
If there is no pressing or emergent reason to update and your PC or notebook is running just great... don't update. (that is especially true when it comes to a BIOS update)
For your issue #2, the problem could be your wireless connection (hotspot, router or modem) that causes the dropped connection.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Open Office Not Functioning Properly After Mavericks 10.9.1 Update Today

Is anyone else getting this issue?
Everyone in the company I manage was using MS Office on their Windows-based computers and we were getting a lot of annoying formatting incompatibilities becasue I was using Pages on my Mac. I actually prefer Open Office and started using that again but we were still having trouble. I decided to install Open Office on all of our computers to avoid cross-platform dramas and with us all using Open Office, it has meant that we've elimintated all annoying little formatting incompatibilities and other problems.
We've been using Open Office on 3 Windows-Based computers and my MacBook Pro for about 3 months. I agreed to the latest Mavericks update 10.9.1 today and since then, whenever I start my Open Office application, I'm getting this annoying little box that won't go away (see attached picture) and numerous options in Open Office can't be accessed. I've deleted and reinstalled Open Office this morning and tried different combination of shutdown, restart, force quit and nothing seems to affect this problem. I also can't reopen files recently opened because an error box pops up to say that they can't be opened because Open Office is not installed. Yet I can go to finder and open them from there.
It would take too much time to list all of the separate issues I've found; so in summary, a lot of the Open Office functionality just ISN'T WORKING since the Mavericks update today. Apple, what have you done?! What can BE done to fix this?

Hi navaneeth27
Yes that's exactly what I'm experiencing.
I'm wondering whether it has something to do with having had Open Office running while installing the update to Mavericks 10.9.1. I had OO open when I agreed to the update and I was still working on a Writer file when my MacBook Pro unexpectedly shut itself down and began installing the update, showing only a progress bar in a small window before reloading everything. It was at that point that the unresponsive 'Don't Reopen' 'Reopen' window appeared. It's insidious and stopping much of the functionalty of OO from working. Such a pain!
I force-quit OO, fully uninstalled it, purged all mention of it from my MBP, restarted tried opening files that were set to be opened by OO by default, and confirmed that they were being opened by Pages - and they were by default. I then reinstalled OO 4.0.1 from the OO site (and that's what I had earlier today, before this adventure began). I then tried opening some previous documents that were saved as .doc and OO popped up WITH the 'Don't Reopen' 'Reopen' window AAAAGAIN!
I'm working on 2 screens so I've placed the box that just won't go away at the very edge of my MBP screen and am workng on files on my second screen - but much of the functionality still isn't available.
I'm stuck and don't know what to do next.

ICalender events not showing up after Maverick update on iMac.

After I updated to Maverick on my iMac, I noticed certain iCal events weren't showing up but they are showing up on my iPhone and Macbook. I know you can't sync through USB anymore - I only sync through iCloud anyways. Has anyone else experienced this?

Hi MEB6510,
Thanks for visiting Apple Support Communities.
If you do not see some iCloud calendar events on your iMac after upgrading to Mavericks, the steps in this article can help:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Cheers,
Jeremy

Audio i/o not working properly after sofware update?

i've been working along fine with my mac, then after my OS told me there was "security update 2007-005" i thought no problem and installed it, then my motu 828 only plays audio for about 5-10sec pop and clicks sometimes then gives up. i have perfectly normal audio when running off the internal speaker without the interface turned on or being used by the os as a playback device. Tried disk utility, disk warrior, installed back to 10.4.0 then did some updates.
i found this in the log files.
May 31 14:50:46 red-door-mac kernel[0]: IOAudioStream[0x2f76100]::clipIfNecessary() - adjusting clipped position to (3ec,990)
May 31 14:50:46 red-door-mac kernel[0]: IOAudioStream[0x2f76100]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (3eb,b90)->(3ed,495).
May 31 14:50:46 red-door-mac kernel[0]: IOAudioStream[0x2f76100]::clipIfNecessary() - adjusting clipped position to (3ec,b90)
May 31 14:50:46 red-door-mac kernel[0]: IOAudioStream[0x2f76100]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (3ec,190)->(3ed,495).
May 31 14:50:46 red-door-mac kernel[0]: IOAudioStream[0x2f76100]::clipIfNecessary() - adjusting clipped position to (3ed,190)
May 31 14:50:46 red-door-mac kernel[0]: IOAudioStream[0x2f76100]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (3ec,390)->(3ed,495).
May 31 14:50:46 red-door-mac kernel[0]: IOAudioStream[0x2f76100]::clipIfNecessary() - adjusting clipped position to (3ed,390)
it works for a little while when i reset back to my motu 828 but it seems to be a problem with the firewire audiostream that's somehow loosing sync or something.
g4 dual 1.25ghz Mac OS X (10.4.9)
Mac OS X (10.4.9)

This board is full of people that are update crazy...
even when they have perfectly good working systems.
i know i thought well it's just a security update not a major update.
Best advice... whenever updating the OS, unplug all
firewire devices.
will take note of that from now on.
Was this auto-update? Try downloading the file and
running the update again with all firewire devices
unplugged.
While the 828 is disconnected perform the factory
reset
again.
Disconnect the firewire cable from the 828mkII
-Press the Setup knob
-Turn the Setup knob all the way to the right
-Press the Select knob
-Press the Value knob
-Power off the interface and plug the firewire cable
back
in
-Power the interface back on
i have the original 828 not mark 2, so no reset i know of, just power on off.
After the Mac updates... reboot and plugin the 828,
see if that doesn't get you going.
pancenter-
cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help.

Function Keys not working properly after recent update today.

Sat C855 - today I downloaded the 2 recent updates & now my function keys aren't working properly. Anyone one else have that problem? What can I do?

Hi! Night shift here! You can find the full model number on the bottom of your laptop. Jerry might not log on again tonight!
Dokie!
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
Attachments:
Capture40.JPG ‏366 KB

Ipod not working properly after ios6 update

I recently updated my ipod touch with the ios6 update, and now most of my apps wont open, and others shut down after a few seconds including the app store and itunes! is there any way of reversing the update? or fixing it without having to go to the apple store?

If the update does not work for you then do as I explained in my previous post and roll back to the previous driver. That philosophy can be applied to all updates.
If there is no pressing or emergent reason to update and your PC or notebook is running just great... don't update. (that is especially true when it comes to a BIOS update)
For your issue #2, the problem could be your wireless connection (hotspot, router or modem) that causes the dropped connection.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

SAFARI NOT WORKING PROPERLY AFTER SOFTWARE UPDATE

WHEN I GO TO A PAGE IN SAFARI, I HOLDS TRYING TO FIND THE PAGE. A FEW MOMENTS LATER IT STATES THAT I'M NOT CONNECTED TO THE INTERNET (which I am). WHEN I REFRESH THE PAGE, IT IMMEDIATELY OPENS UP. THIS STARTED TWO DAYS AGO RIGHT AFTER THE SOFTWARE UPDATE FOR SAFARI. SOMETHING VERY BUGGY HERE. HELP

User "Bee" gave this solution. I tried it and worked for me, although Safari is loading very slowly.
Good luck!
See if you have any of the following files. Just follow the path.
HD/Library/Application Support/Conduit
HD/Library/InputManagers/CTLoader
HD/Library/Receipts/ctloader.pkg
HD/Library/Receipts/<Toolbar name>.pkg
HD/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
HD/Users/<User name>/Library/Application Support/Conduit
If you do, trash them and restart Safari.

Home Button not working properly after latest update

After installing the latest update on my Iphone 4S, the home button immediately started to give me problems. It works sporadically. Sometimes it allows me to close apps when I tap it twice, sometimes it won't do anything, sometimes it will go to the negative effect. This was not an issue prior to the latest update. I have version 7.1. Has anyone found a repair for this?

So did you have a similar issue before upgrading to iOS 7.1? This can also be a hardware issue which you didn't have before.To be sure, get your home button checked top you're nearest Apple store.If you still have the problem, then this may have been caused by a bug.to report the bug, go to this site: apple.com/feedback/iphone.html.The iPhone team may even contact flute further details from you.

E-Quake add-on not working properly after Firefox update

Question E-Quake no longer shows the mag and location at the bottom right corner of my page...Firefox just updated itself a week ago to 9.0.1.... ...I think it still shakes the page though, but is not showing the info...

Why not go straight to Control Panel>Windows Update? There is no need to use either Firefox or Internet Explorer.
If I were you I would update to at least IE9.
I'm using IE View 1.5.6 with IE 10 without problems.

Java SE 6 runtime not updating properly after Mavericks update

Similar Messages

Maybe you are looking for