Java stack is not available after Offline backup
hi all,
Am facing this problem, in one of the XI system ,
after offline backup , am able to login in ABAP stack
but when i type sxmb_ifr am not able login to the java stack.
the log says, ORACLE NOT AVAILABLE,
ORA-27101 Shared memory realm does not exist.
ORA-1034
please advice
Regds
Sidharth
Hi Sidharth,
Since you are able to login to ABAP, the DB must be up, but to double check run "r3trans -d" at command prompt and verify the connectivity.
Secondly, you need to check whether java server processes are running... using JCMON.
If they are running, then try a stop SAP, reboot and start SAP; so that dangling shared memory will be free for use after reboot.
If not, then you may check why the java instace in failing to start, monitor jcontrol and jlaunch when the instance is starting and defaulttrace#.trc logs to know why the instance failed to start.
Otherwise there is no specific relation between offline backup and SAP applications.
Regards,
Saurabh.
Similar Messages
-
Transport via CMS (Java stack) no longer available after upgrade to sp 14
Hello
Recently we have upgraded our SAP-XI (SAP NetWeaver 2004s) up to service pack 14.
Since then the CMS is no longer available on the Java stack. Exporting objects is only possible using the File System.
When we try to release change lists for CMS transport we get the following errors:
#8 10:22:41 [AWT-EventQueue-0] ERROR com.sap.aii.utilxi.swing.toolkit.ExceptionDialog: Throwable
Thrown:
MESSAGE ID: com.sap.aii.ib.gui.operations.rb_commands.MESSAGE_TRANSPORTERROR
com.sap.aii.utilxi.swing.framework.FrameworkException: Errors occurred when transporting the change list
at com.sap.aii.ib.gui.operations.TransportCLCommand.execute(TransportCLCommand.java:203)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
Root cause:
java.lang.AbstractMethodError: com.sap.aii.ib.sbeans.transport.TransportServiceRemote_Stub.releaseChangelist(Lcom/sap/aii/ib/core/clmgmt/ChangeListData;Lcom/sap/aii/ib/bom/gen/XiTypeId;Lcom/sap/aii/ib/core/transport/api/options/ExportOptions;)Lcom/sap/aii/utilxi/misc/api/ICheckResult;
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
Has anybody experienced similar problems with service pack 14 and has found a solution to "reactivate" the CMS? Might it be an authorization problem (UME)?
Regards
Uwe
Appendix: Entire ErrorLog
#8 10:22:41 [AWT-EventQueue-0] ERROR com.sap.aii.utilxi.swing.toolkit.ExceptionDialog: Throwable
Thrown:
MESSAGE ID: com.sap.aii.ib.gui.operations.rb_commands.MESSAGE_TRANSPORTERROR
com.sap.aii.utilxi.swing.framework.FrameworkException: Errors occurred when transporting the change list
at com.sap.aii.ib.gui.operations.TransportCLCommand.execute(TransportCLCommand.java:203)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Root cause:
java.lang.AbstractMethodError: com.sap.aii.ib.sbeans.transport.TransportServiceRemote_Stub.releaseChangelist(Lcom/sap/aii/ib/core/clmgmt/ChangeListData;Lcom/sap/aii/ib/bom/gen/XiTypeId;Lcom/sap/aii/ib/core/transport/api/options/ExportOptions;)Lcom/sap/aii/utilxi/misc/api/ICheckResult;
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
at $Proxy8.releaseChangelist(Unknown Source)
at com.sap.aii.ib.client.transport.gen.TransportServiceDelegate.releaseChangelist(TransportServiceDelegate.java:219)
at com.sap.aii.ib.gui.operations.TransportCLCommand.execute(TransportCLCommand.java:192)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
#7 10:22:41 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.utilxi.swing.framework.FrameworkException: com.sap.aii.utilxi.swing.framework.FrameworkException: Errors occurred when transporting the change list
at com.sap.aii.ib.gui.operations.TransportCLCommand.execute(TransportCLCommand.java:203)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
#6 10:22:41 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.utilxi.swing.framework.FrameworkException: Errors occurred when transporting the change list
#5 10:22:41 [AWT-EventQueue-0] FINE AutoLog.created.java.lang.AbstractMethodError: java.lang.AbstractMethodError: com.sap.aii.ib.sbeans.transport.TransportServiceRemote_Stub.releaseChangelist(Lcom/sap/aii/ib/core/clmgmt/ChangeListData;Lcom/sap/aii/ib/bom/gen/XiTypeId;Lcom/sap/aii/ib/core/transport/api/options/ExportOptions;)Lcom/sap/aii/utilxi/misc/api/ICheckResult;
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
at $Proxy8.releaseChangelist(Unknown Source)
at com.sap.aii.ib.client.transport.gen.TransportServiceDelegate.releaseChangelist(TransportServiceDelegate.java:219)
at com.sap.aii.ib.gui.operations.TransportCLCommand.execute(TransportCLCommand.java:192)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
#4 10:22:41 [AWT-EventQueue-0] DEBUG AutoLog.created.java.lang.AbstractMethodError: com.sap.aii.ib.sbeans.transport.TransportServiceRemote_Stub.releaseChangelist(Lcom/sap/aii/ib/core/clmgmt/ChangeListData;Lcom/sap/aii/ib/bom/gen/XiTypeId;Lcom/sap/aii/ib/core/transport/api/options/ExportOptions;)Lcom/sap/aii/utilxi/misc/api/ICheckResult;
#3 10:22:13 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "TypeConntestObj" is not registered in the service class Type Service - Type Information
at com.sap.aii.ib.core.service.ServiceBase.getServiceImpl(ServiceBase.java:71)
at com.sap.aii.ib.bom.gen.TypeServiceImpl.getTypeInformation(TypeServiceImpl.java:82)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.getTypeInfo(InternalXiItemService.java:23)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.createEmptyXiItem(InternalXiItemService.java:92)
at com.sap.aii.ib.gui.xiitem.services.XiItemServiceProvider.createEmptyXiItem(XiItemServiceProvider.java:97)
at com.sap.aii.ib.gui.xiitem.InternalXiItemServiceForNameNamespaceObjects.addType(InternalXiItemServiceForNameNamespaceObjects.java:68)
at com.sap.aii.ib.gui.xiitem.InternalXiItemServiceForNameNamespaceObjects.<init>(InternalXiItemServiceForNameNamespaceObjects.java:55)
at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.guiStartup(StartupCodeEntry.java:154)
at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:111)
at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
at com.sap.aii.ibrep.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:93)
at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:383)
at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:209)
at com.sap.aii.ib.gui.login.SplashLoginFrame$6.run(SplashLoginFrame.java:429)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
#2 10:22:13 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "TypeConntestObj" is not registered in the service class Type Service - Type Information
#1 10:22:13 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "versConflList" is not registered in the service class Type Service - Type Information
at com.sap.aii.ib.core.service.ServiceBase.getServiceImpl(ServiceBase.java:71)
at com.sap.aii.ib.bom.gen.TypeServiceImpl.getTypeInformation(TypeServiceImpl.java:82)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.getTypeInfo(InternalXiItemService.java:23)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemServiceBase.<init>(InternalXiItemServiceBase.java:44)
at com.sap.aii.ib.gui.xiitem.CommonInternalXiItemService$ForVersionConflictList.<init>(CommonInternalXiItemService.java:326)
at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.guiStartup(StartupCodeEntry.java:150)
at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:111)
at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
at com.sap.aii.ibrep.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:93)
at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:383)
at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:209)
at com.sap.aii.ib.gui.login.SplashLoginFrame$6.run(SplashLoginFrame.java:429)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
#0 10:22:13 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "versConflList" is not registered in the service class Type Service - Type InformationHello Lieselot
The upgrade of our SAP-XI was done by an external company. Therefore I cannot tell you the detailed procedure.
However, you should search the Service Marketplace for patches of support package 0014 (there should be at least one patch around).
If I remember correctly patching was required on both ABAP and Java stack.
Regards
Uwe -
Background Job Not Reconnected After Offline Backup.
Hi all,
Background jobs which are scheduled before Databse Offline Backup are always cancelled. Reconnect WP does not happen even if following parameters are set.
We had set profile parameters in all Application Server like
rsdb/reco_trials = 15
rsdb/reco_sleep_time = 60
rsdb/reco_add_error_codes = +3113 +3114 +1012 +1014 +1033 +1034 +1089 +1089 +1090 +1092
R3 Production server (640 Kernel, Patch 175 , SAP_BASIS 620 , SAP_APPL 470)
Database : Oracle 9.2.0.6
SYSLOG Msg : SM21
<b> Communication error, CPIC return code 020, SAP return code 497
> CPI-C function: CMINIT(SAP)
Operating system call gethostbyname failed (error no. 0 )
Operating system call gethostbyname failed (error no. 0 )
Communication error, CPIC return code 020, SAP return code 497
> CPI-C function: CMINIT(SAP)
Communication error, CPIC return code 020, SAP return code 497
> CPI-C function: CMINIT(SAP)
Communication error, CPIC return code 020, SAP return code 497
> CPI-C function: CMINIT(SAP) </b>
Thanks & Regards.
NabaLooks like some Gateway error....though not sure...
Check Note 63347 - List: CPIC error codes and then u can try to troubleshoot further... -
What means 'Stack trace not available'
I have an application in produccion.
-Oas 10g (9.04)
-Jdeveloper 9.04
-Jheadstart 9.405
my new requirement is:
an upload file(ms excel) in a jsp page
and refresh the data from the html table in this jsp
...Then i modified:
*****the TablePage (jsp)
add to my form: enctype="multipart/form-data"<html:form name="O0130200_PLANESBean" action="/StartO0130200" type="oracle.jheadstart.view.struts.JhsDynaActionForm" scope="session" enctype="multipart/form-data">
*****struts-config
*****Add a new Action (customized) extends from JhsAction
struts-config:
<!--SISYGES:INIT-->
<form-property className="oracle.jheadstart.controller.struts.config.JhsFormPropertyConfig" name="O0130200_PLANESDetallePlanFile" type="org.apache.struts.upload.FormFile">
<set-property property="isPersistent" value="false"/>
<set-property property="isFileField" value="true"/>
</form-property>
<!--SISYGES:END-->
</form-bean>
<action path="O0130200_PLANESRouter" type="oracle.jheadstart.controller.struts.action.ActionRouter">
<set-property property="defaultForward" value="initial"/>
<forward name="initial" path="GetO0130200_PLANESSet"/>
<forward name="browse" path="BrowseO0130200_PLANESSet"/>
<forward name="insert" path="GetDefaultO0130200_PLANES"/>
<forward name="save" path="SaveO0130200_PLANES"/>
<forward name="delete" path="DeleteO0130200_PLANES"/>
<forward name="groupPage" path="/WEB-INF/page/O0130200_PLANESPage.jsp"/>
<!--SISYGES:INIT-->
<forward name="uploadDetallePlan" path="UploadDetallePlan"/>
<!--SISYGES:END-->
</action>
<!--SISYGES:INIT-->
<action
path="UploadDetallePlan"
type="com.sisyges.o0130200.model.struts.action.UploadDetallePlanAction"
name="O0130200_PLANESBean"
scope="session">
<!-- select key of result DataObject in SessionData -->
<set-property property="dataObjectName" value="O0130200_PLANES"/>
<!-- name of dataObject interface -->
<set-property property="dataObjectInterface" value="com.sisyges.o0130200.model.Planes"/>
<set-property property="persistActionParameterName" value="save"/>
<!-- Commit transaction? -->
<set-property property="doCommit" value="true"/>
<forward name="success" path="BrowseO0130200_PLANESSet"/>
<forward name="userError" path="/WEB-INF/page/O0130200_PLANESPage.jsp"/>
</action>
<!--SISYGES:END-->
Made these changes my application only runs correctly some times without showing some error message
....But in jdeveloper, the embedded oc4j show :
Stack trace not available after execute the action...
this action execute correctly....(I print in the screen with 'System.out.println()' step by step ...and this fail when the execute method finalizes)
thanksRigoberto,
This sounds like a OC4J/J2EE issue that is not related to JHeadstart. To simplify the test case, you could create a simple drag-and-drop ADF application without JHeadstart and see if the same problem occurs there. Can you please log a TAR at MetaLink ( http://metalink.oracle.com/ ), or ask this question at the OC4J/J2EE forum at OC4J ? Thanks.
Sandra Muller
JHeadstart Team
Oracle Consulting -
Java Stack is not started in SAP netweaver ABAP+JAVA Stack
Dear All,
Win2003 64 bit , ECC6.0 , Oracle 10.2.0.2.
Its a newly installed SAP Netweaver Dual Stack (PI) , Yesterday i have done Client copy from 001 to 999 (SAP_UCUS).
Client copy also successfully completed .
login/system_client=999 ,i have activated in Default profile and i have restarted the Server.
Now i dont have issue with ABAP stack ,its working fine, but java stack is not working running.
std_output0.out log:
Service com.sap.aii.adapter.mail.svc started. (812 ms).
Service com.adobe~XMLFormService started. (2937 ms).
Service com.sap.aii.af.ispeak.svc started. (390 ms).
ServiceManager started for 73719 ms.
Framework started for 85781 ms.
SAP J2EE Engine Version 7.00 PatchLevel is running!
PatchLevel September 11, 2006 16:35 GMT
>
Login :### Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.TypeMappingImpl::initializeRelations
Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.GeneratedComplexType::_loadInto
Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.InstanceBuilder::readSequence
Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.InstanceBuilder::readElement
SAP J2EE Engine Version 7.00 PatchLevel is shutting down! PatchLevel September 11, 2006 16:35 GMT
=================
C:\Documents and Settings\ixdadm>jcmon pf=D:\usr\sap\IXD\SYS\profile\IXD_DVEBMGS
00_SAPXIDEV
[Thr 4576] MtxInit: -2 0 0
============================================================
JControl Monitor Program - Main Menu
============================================================
0 : exit
10 : Cluster Administration Menu
20 : Local Administration Menu
30 : Shared Memory Menu (Solid Rock, experimental)
command => 20
Can't open shared memory administration (rc = -107)
============================================================
Kindly suggest .
Edited by: satheesh0812 on Dec 30, 2010 12:00 PMHi,
Please provide the full log entries of server0_out.log.
You can access UME service properties in config tool by following this path..
Global server configuration -> services -> com.sap.security.core.ume.service
There you can set the following settings for new client 900 (it u want to change it)
ume.r3.connection.master.client
ume.r3.connection.master.user
ume.r3.connection.master.passwd
Refer this [useful link|http://help.sap.com/saphelp_nw04s/helpdata/en/45/1bbdccc7850064e10000000a1553f7/frameset.htm] to get more detailed information. Refer [Config Tool actviities|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0a3d713-5ab6-2c10-ddb1-e7487bc33384?quicklink=index&overridelayout=true] link To get more information.
Also, Make sure that the Users J2EE_GUEST, J2EE_ADMIN, SAPJSF ABAP Users exist in the ABAP client (i.e. client number as mentioned in ume.r3.connection.master.client ) and they are not locked. All the required roles need to be assigned properly.
Regards,
Bhavik G. Shroff
Edited by: Bhavik G. Shroff on Dec 31, 2010 2:58 PM -
Mac mini bluetooth not available after updrading to OSX 10.8
The bluetooth module is not available after upgrading to OSX 10.8 on a mac mini late 2009, anyone with this issue?
Message was edited by: MagnusumI have an issue where I get Bluetooth mouse/keyboard at the login screen, but once it goes to the desktop they are both dead. This only happens when I have my Drobos plugged up via FireWire. If I boot without those devices plugged in, it works.
Anything like that for you? -
Content Server Explorer is not available after sucessful installation of Plumtree Portal
Content Server Explorer is not available after sucessful installation of Plumtree Portal.
Please reply us.To clarify, do you have the User Profile Service (including MySite Host) up and running on this environment? That's subtley different to the full MySite experience which is clearly not applicable...
Interesting question - thanks for that. Until now I didn't realise there was a difference.
The User Profile Service is up and running, but no MySite Host is set. (I don't believe MySite will be available anywhere here. I guess that means there's no valid MySite Host for me to use.)
Many thanks,
Geoff -
ORA-29547: Java system class not available: oracle/aurora/rdbms/Compiler
Hi experts,
I get the above error when I run the following code using sqlplus:
create or replace and compile java source named "DirList"
2 as
3 import java.io.*;
4 import java.sql.*;
5
6 public class DirList
7 {
8 public static void getList(String directory)
9 throws SQLException
10 {
11 String element;
12
13
14 File path = new File(directory);
15 File[] FileList = path.listFiles();
16 String TheFile;
17 Date ModiDate;
18 #sql { DELETE FROM DIR_LIST};
19
20 for(int i = 0; i < FileList.length; i++)
21 {
22 TheFile = FileList[ i ].getAbsolutePath();
23 ModiDate = new Date(FileList[ i ].lastModified());
24
25 #sql { INSERT INTO DIR_LIST (FILENAME,LASTMODIFIED)
26 VALUES (:TheFile,:ModiDate) };
27 }
28 }
29 }
30 /
create or replace and compile java source named "DirList"
ERROR at line 1:
ORA-29547: Java system class not available: oracle/aurora/rdbms/CompilerAny body can tell me what to do to run external commands like os commands using pl/sql in details with example.
I will appreciate any sooner response.
ThanksWhat is the output of this query?
SQL> select owner, object_name, object_type from dba_objects where object_name = 'oracle/aurora/rdbms/Compiler' ;
OWNER OBJECT_NAME OBJECT_TYPE
SYS oracle/aurora/rdbms/Compiler JAVA CLASS
PUBLIC oracle/aurora/rdbms/Compiler SYNONYM
2 rows selected.
SQL> disconnect
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.3.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.3.0 - Production
SQL> -
DataSource not available after restart
Hi,
I have created a new JDBC driver for MS SQL Server 2005 and a custom data source that is using the JDBC driver and that is connecting to my database. Upon creation of the data source, the data source is shown as available (green) and works fine.
However, when I restart my system, the data source is still there, but is not available (red). When I delete the data source and create it again, it works fine.
Does anybody know why the data source might be not available after the restart of the server? Any help would be highly appreciated.
Best regards
HolgerI don't know what I should change in the MS SQL Server. And as the DataSource works correctly once I have deleted and recreated it, I would have thought that the problem is somewhere with the application server.
A colleague of mine is using the same application and is having the same problem, although he independently created his system.
Best regards
Holger -
Why is Safari not available for offline reading?
Why is Safari not available for offline reading?
You load the article from the Reading List? (tap to enlarge image)
-
System is not coming up in MSCS environment after offline backup from DB13
Hi All,
SAP system is not coming up after DB offline backup from DB13.
Here are the details of system. SAP XI 3.0 SR1 NW04 running on Microsoft clustered environment windows 2003 and Oracle 9.2.0.6.
My observations:-
1. All the services of cluster admin was up except XE1.World when DB offline backup completed (executed through DB13).
2. services.msc entry OracleXE1920TNSListener (automatic start) and OracleServiceXE1 (automatic start) was down.
and sqlplus "/as sysdba" was failing with ORA-12560: TNS:protocol adapter error.
Please note gw/netstat_once parameter is alredy there with value 0.
Further I would like to add, when I started cluster admin service XE1.World by right click - bring online, services.msc entry OracleServiceXE1 came up, but OracleXE1920TNSListener was still down, then I started listener from cmd mode lsnrctl start.
Kindly suggest.
Thanks & Regards
Praveen Verma
Please find the trace (15) of Brbackup pasted below
Detail log: bdvbgsin.aff
BR0200I BR_TRACE: location BrEnvProcess-1, Environment of BRTOOLS:
'BR_TRACE=15'
'ClusterLog=C:\WINDOWS\Cluster\cluster.log'
'ComSpec=C:\WINDOWS\system32\cmd.exe'
'CPIC_MAX_CONV=20'
'DBMS_TYPE=ORA'
'DBS_ORA_SCHEMA=SAPXE1'
'dbs_ora_tnsname=XE1'
'DSMI_CONFIG=e:\oracle\xe1\920\database\dsm.opt'
'DSMI_DIR=D:\Program Files\tivoli\tsm\api'
'DSMI_LOG=C:\Temp\3'
'FP_NO_HOST_CHECK=NO'
'JAVA_HOME=D:\Program Files\Java'
'NLS_LANG=AMERICAN_AMERICA.UTF8'
'NODNSSAPTRANSHOST=1'
'NUMBER_OF_PROCESSORS=4'
'ORACLE_HOME=E:\oracle\XE1\920'
'ORACLE_SID=XE1'
'OS=Windows_NT'
'Path=D:\Program Files\Java\bin;E:\oracle\XE1\920\jre\1.4.2\bin\client;E:\oracle\XE1\920\jre\1.4.2\bin;E:\oracle\XE1\920\bin;C:\
'PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH'
'PPID=5540'
'PROCESSOR_ARCHITECTURE=x86'
'PROCESSOR_IDENTIFIER=x86 Family 15 Model 4 Stepping 1, GenuineIntel'
'PROCESSOR_LEVEL=15'
'PROCESSOR_REVISION=0401'
'SAPDATA_HOME=K:\oracle\XE1'
'SAPEXE=C:\WINDOWS\SapCluster'
'SAPLOCALHOST=dcbvsapxe1'
'SIDE_INFO=E:\usr\sap/XE1/G20/data/sideinfo'
'SystemDrive=C:'
'SystemRoot=C:\WINDOWS'
'TEMP=C:\WINDOWS\TEMP'
'TMP=C:\WINDOWS\TEMP'
'VMPATH=D:\Program Files\VERITAS\VERITAS Volume Manager 4.3\'
'VRTSobdir="D:\Program Files\VERITAS\VERITAS Object Bus"'
'windir=C:\WINDOWS'
BR0248I BR_TRACE: level 3, function ora_base_get entry with 'XE1'
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME0 ORACLE_SID'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME0 ORACLE_BASE'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with 'E:\oracle'
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_XE1101 ORACLE_BASE'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_XE1102 ORACLE_BASE'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home0 ORACLE_SID'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home0 ORACLE_BASE'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME1 ORACLE_SID'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME1 ORACLE_BASE'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home1 ORACLE_SID'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home1 ORACLE_BASE'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME2 ORACLE_SID'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME2 ORACLE_BASE'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home2 ORACLE_SID'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home2 ORACLE_BASE'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME3 ORACLE_SID'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME3 ORACLE_BASE'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home3 ORACLE_SID'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home3 ORACLE_BASE'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME4 ORACLE_SID'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME4 ORACLE_BASE'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home4 ORACLE_SID'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home4 ORACLE_BASE'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME5 ORACLE_SID'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME5 ORACLE_BASE'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home5 ORACLE_SID'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home5 ORACLE_BASE'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME6 ORACLE_SID'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME6 ORACLE_BASE'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home6 ORACLE_SID'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home6 ORACLE_BASE'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME7 ORACLE_SID'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME7 ORACLE_BASE'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home7 ORACLE_SID'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home7 ORACLE_BASE'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME8 ORACLE_SID'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME8 ORACLE_BASE'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home8 ORACLE_SID'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home8 ORACLE_BASE'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME9 ORACLE_SID'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME9 ORACLE_BASE'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home9 ORACLE_SID'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 4, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home9 ORACLE_BASE'
BR0250I BR_TRACE: level 4, function reg_key_val_get exit with FFFFFFFF
BR0250I BR_TRACE: level 3, function ora_base_get exit with 'E:\oracle'
BR0249I BR_TRACE: level 2, function BrEnvProcess exit with 0
BR0248I BR_TRACE: level 2, function BrNameSet entry with 'void'
BR0248I BR_TRACE: level 3, function BrFileStatGet entry with 'E:\oracle\XE1\920\database\spfileXE1.ora'
BR0250I BR_TRACE: level 3, function BrFileStatGet exit with '3584 3584'
BR0248I BR_TRACE: level 3, function BrFileStatGet entry with 'C:\WINDOWS\SapCluster\brarchive.exe'
BR0250I BR_TRACE: level 3, function BrFileStatGet exit with '1470464 1470464'
BR0248I BR_TRACE: level 3, function BrFileStatGet entry with 'C:\WINDOWS\SapCluster\brbackup.exe'
BR0250I BR_TRACE: level 3, function BrFileStatGet exit with '1662976 1662976'
BR0248I BR_TRACE: level 3, function BrFileStatGet entry with 'C:\WINDOWS\SapCluster\brconnect.exe'
BR0250I BR_TRACE: level 3, function BrFileStatGet exit with '2232320 2232320'
BR0248I BR_TRACE: level 3, function BrFileStatGet entry with 'C:\WINDOWS\SapCluster\brrecover.exe'
BR0250I BR_TRACE: level 3, function BrFileStatGet exit with '1863680 1863680'
BR0248I BR_TRACE: level 3, function BrFileStatGet entry with 'C:\WINDOWS\SapCluster\brrestore.exe'
BR0250I BR_TRACE: level 3, function BrFileStatGet exit with '770048 770048'
BR0248I BR_TRACE: level 3, function BrFileStatGet entry with 'C:\WINDOWS\SapCluster\brspace.exe'
BR0250I BR_TRACE: level 3, function BrFileStatGet exit with '2396160 2396160'
BR0248I BR_TRACE: level 3, function BrFileStatGet entry with 'C:\WINDOWS\SapCluster\brtools.exe'
BR0250I BR_TRACE: level 3, function BrFileStatGet exit with '1179648 1179648'
BR0248I BR_TRACE: level 3, function BrFileStatGet entry with 'C:\WINDOWS\SapCluster\backint.exe'
BR0250I BR_TRACE: level 3, function BrFileStatGet exit with '4042752 4042752'
BR0248I BR_TRACE: level 3, function BrFileStatGet entry with 'C:\WINDOWS\SapCluster\splitint.exe'
BR0250I BR_TRACE: level 3, function BrFileStatGet exit with 'FILE_NULL'
BR0248I BR_TRACE: level 3, function BrFileStatGet entry with 'C:\WINDOWS\SapCluster\splitint.bat'
BR0250I BR_TRACE: level 3, function BrFileStatGet exit with 'FILE_NULL'
BR0248I BR_TRACE: level 3, function BrFileStatGet entry with 'C:\WINDOWS\SapCluster\splitint.cmd'
BR0250I BR_TRACE: level 3, function BrFileStatGet exit with 'FILE_NULL'
BR0248I BR_TRACE: level 3, function BrPidGet entry with 'void'
BR0249I BR_TRACE: level 3, function BrPidGet exit with 1224
BR0248I BR_TRACE: level 3, function BrFileStatGet entry with 'K:\oracle\XE1\saptrace\background\alert_XE1.log'
BR0250I BR_TRACE: level 3, function BrFileStatGet exit with '4608258 4608258'
BR0248I BR_TRACE: level 3, function BrFileStatGet entry with 'C:\WINDOWS\SapCluster\sapftp.exe'
BR0250I BR_TRACE: level 3, function BrFileStatGet exit with 'FILE_NULL'
BR0248I BR_TRACE: level 3, function BrFileStatGet entry with 'E:\oracle\XE1\920\rdbms\admin\log'
BR0250I BR_TRACE: level 3, function BrFileStatGet exit with 'FILE_NULL'
BR0248I BR_TRACE: level 3, function BrFileStatGet entry with 'E:\oracle\XE1\920\nls'
BR0250I BR_TRACE: level 3, function BrFileStatGet exit with 'FILE_NULL'
BR0249I BR_TRACE: level 2, function BrNameSet exit with 0
BR0248I BR_TRACE: level 2, function file_printout entry with 'brb_log bdvbgsin.aff'
BR0248I BR_TRACE: level 3, function BrNameBuild entry with '1 bdvbgsin.aff K:\oracle\XE1\sapbackup'
BR0250I BR_TRACE: level 3, function BrNameBuild exit with 'K:\oracle\XE1\sapbackup\bdvbgsin.aff'
BR0051I BRBACKUP 6.40 (40)
BR0200I BR_TRACE: location BrEnvProcess-1, Environment of BRBACKUP:
'BR_TRACE=15'
'ClusterLog=C:\WINDOWS\Cluster\cluster.log'
'ComSpec=C:\WINDOWS\system32\cmd.exe'
'CPIC_MAX_CONV=20'
'DBMS_TYPE=ORA'
'DBS_ORA_SCHEMA=SAPXE1'
'dbs_ora_tnsname=XE1'
'DSMI_CONFIG=e:\oracle\xe1\920\database\dsm.opt'
'DSMI_DIR=D:\Program Files\tivoli\tsm\api'
'DSMI_LOG=C:\Temp\3'
'FP_NO_HOST_CHECK=NO'
'JAVA_HOME=D:\Program Files\Java'
'NLS_LANG=AMERICAN_AMERICA.UTF8'
'NODNSSAPTRANSHOST=1'
'NUMBER_OF_PROCESSORS=4'
'ORACLE_HOME=E:\oracle\XE1\920'
'ORACLE_SID=XE1'
'OS=Windows_NT'
'Path=D:\Program Files\Java\bin;E:\oracle\XE1\920\jre\1.4.2\bin\client;E:\oracle\XE1\920\jre\1.4.2\bin;E:\oracle\XE1\920\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\Program Files\Windows Resource Kits\Tools\;C:\
'PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH'
'PPID=5540'
'PROCESSOR_ARCHITECTURE=x86'
'PROCESSOR_IDENTIFIER=x86 Family 15 Model 4 Stepping 1, GenuineIntel'
'PROCESSOR_LEVEL=15'
'PROCESSOR_REVISION=0401'
'SAPDATA_HOME=K:\oracle\XE1'
'SAPEXE=C:\WINDOWS\SapCluster'
'SAPLOCALHOST=dcbvsapxe1'
'SIDE_INFO=E:\usr\sap/XE1/G20/data/sideinfo'
'SystemDrive=C:'
'SystemRoot=C:\WINDOWS'
'TEMP=C:\WINDOWS\TEMP'
'TMP=C:\WINDOWS\TEMP'
'VMPATH=D:\Program Files\VERITAS\VERITAS Volume Manager 4.3\'
'VRTSobdir="D:\Program Files\VERITAS\VERITAS Object Bus"'
'windir=C:\WINDOWS'
BR0248I BR_TRACE: level 2, function ora_base_get entry with 'XE1'
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME0 ORACLE_SID'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME0 ORACLE_BASE'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with 'E:\oracle'
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_XE1101 ORACLE_BASE'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_XE1102 ORACLE_BASE'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home0 ORACLE_SID'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home0 ORACLE_BASE'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME1 ORACLE_SID'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME1 ORACLE_BASE'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home1 ORACLE_SID'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home1 ORACLE_BASE'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME2 ORACLE_SID'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME2 ORACLE_BASE'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home2 ORACLE_SID'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home2 ORACLE_BASE'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME3 ORACLE_SID'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME3 ORACLE_BASE'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home3 ORACLE_SID'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home3 ORACLE_BASE'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME4 ORACLE_SID'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME4 ORACLE_BASE'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home4 ORACLE_SID'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home4 ORACLE_BASE'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME5 ORACLE_SID'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME5 ORACLE_BASE'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home5 ORACLE_SID'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home5 ORACLE_BASE'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME6 ORACLE_SID'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME6 ORACLE_BASE'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home6 ORACLE_SID'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home6 ORACLE_BASE'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME7 ORACLE_SID'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME7 ORACLE_BASE'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home7 ORACLE_SID'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home7 ORACLE_BASE'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME8 ORACLE_SID'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME8 ORACLE_BASE'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home8 ORACLE_SID'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home8 ORACLE_BASE'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME9 ORACLE_SID'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\HOME9 ORACLE_BASE'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home9 ORACLE_SID'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0248I BR_TRACE: level 3, function reg_key_val_get entry with 'SOFTWARE\ORACLE\KEY_OraDb10g_home9 ORACLE_BASE'
BR0250I BR_TRACE: level 3, function reg_key_val_get exit with FFFFFFFF
BR0250I BR_TRACE: level 2, function ora_base_get exit with 'E:\oracle'
BR0248I BR_TRACE: level 2, function BrCopyBuild entry with '1 2 0 \nul \nul'
BR0250I BR_TRACE: level 2, function BrCopyBuild exit with 'copy \nul \nul'
BR0248I BR_TRACE: level 2, function BrPipeOpen entry with 'copy \nul \nul'
BR0248I BR_TRACE: level 3, function BrOraPatch entry with 'TRUE'
BR0249I BR_TRACE: level 3, function BrOraPatch exit with 0
BR0200I BR_TRACE: location BrPipeOpen-3, command line:
'( copy \nul \nul ) 2>&1'
BR0250I BR_TRACE: level 2, function BrPipeOpen exit with 7C38B548
BR0200I BR_TRACE: location BrEnvProcess-95, command output from pipe:
' 1 file(s) copied.^'
BR0248I BR_TRACE: level 2, function BrPipeClose entry with 'copy \nul \nul'
BR0248I BR_TRACE: level 3, function BrOraPatch entry with 'FALSE'
BR0249I BR_TRACE: level 3, function BrOraPatch exit with 0
BR0249I BR_TRACE: level 2, function BrPipeClose exit with 0
BR0249I BR_TRACE: level 1, function BrEnvProcess exit with 0
BR0248I BR_TRACE: level 1, function BrNameSet entry with 'void'
BR0248I BR_TRACE: level 2, function BrFileStatGet entry with 'E:\oracle\XE1\920\bin\SQLPLUS.EXE'
BR0250I BR_TRACE: level 2, function BrFileStatGet exit with '651264 651264'
BR0248I BR_TRACE: level 2, function BrFileStatGet entry with 'E:\oracle\XE1\920\bin\RMAN.EXE'
BR0250I BR_TRACE: level 2, function BrFileStatGet exit with '925968 925968'
BR0248I BR_TRACE: level 2, function BrFileStatGet entry with 'E:\oracle\XE1\920\bin\SVRMGRL.EXE'
BR0250I BR_TRACE: level 2, function BrFileStatGet exit with 'FILE_NULL'
BR0248I BR_TRACE: level 2, function BrFileStatGet entry with 'E:\oracle\XE1\920\bin\SVRMGR30.EXE'
BR0250I BR_TRACE: level 2, function BrFileStatGet exit with 'FILE_NULL'
BR0248I BR_TRACE: level 2, function BrFileStatGet entry with 'E:\oracle\XE1\920\database\spfileXE1.ora'
BR0250I BR_TRACE: level 2, function BrFileStatGet exit with '3584 3584'
BR0248I BR_TRACE: level 2, function BrOraReplace entry with 'initXE1.sap'
BR0250I BR_TRACE: level 2, function BrOraReplace exit with 'void'
BR0248I BR_TRACE: level 2, function BrFileStatGet entry with 'C:\WINDOWS\SapCluster\brarchive.exe'
BR0250I BR_TRACE: level 2, function BrFileStatGet exit with '1470464 1470464'
BR0248I BR_TRACE: level 2, function BrFileStatGet entry with 'C:\WINDOWS\SapCluster\brbackup.exe'
BR0250I BR_TRACE: level 2, function BrFileStatGet exit with '1662976 1662976'
BR0248I BR_TRACE: level 2, function BrFileStatGet entry with 'C:\WINDOWS\SapCluster\brconnect.exe'
BR0250I BR_TRACE: level 2, function BrFileStatGet exit with '2232320 2232320'
BR0248I BR_TRACE: level 2, function BrFileStatGet entry with 'C:\WINDOWS\SapCluster\brrecover.exe'
BR0250I BR_TRACE: level 2, function BrFileStatGet exit with '1863680 1863680'
BR0248I BR_TRACE: level 2, function BrFileStatGet entry with 'C:\WINDOWS\SapCluster\brrestore.exe'
BR0250I BR_TRACE: level 2, function BrFileStatGet exit with '770048 770048'
BR0248I BR_TRACE: level 2, function BrFileStatGet entry with 'C:\WINDOWS\SapCluster\brspace.exe'
BR0250I BR_TRACE: level 2, function BrFileStatGet exit with '2396160 2396160'
BR0248I BR_TRACE: level 2, function BrFileStatGet entry with 'C:\WINDOWS\SapCluster\brtools.exe'
BR0250I BR_TRACE: level 2, function BrFileStatGet exit with '1179648 1179648'
BR0248I BR_TRACE: level 2, function BrFileStatGet entry with 'C:\WINDOWS\SapCluster\backint.exe'
BR0250I BR_TRACE: level 2, function BrFileStatGet exit with '4042752 4042752'
BR0248I BR_TRACE: level 2, function BrFileStatGet entry with 'C:\WINDOWS\SapCluster\splitint.exe'
BR0250I BR_TRACE: level 2, function BrFileStatGet exit with 'FILE_NULL'
BR0248I BR_TRACE: level 2, function BrFileStatGet entry with 'C:\WINDOWS\SapCluster\splitint.bat'
BR0250I BR_TRACE: level 2, function BrFileStatGet exit with 'FILE_NULL'
BR0248I BR_TRACE: level 2, function BrFileStatGet entry with 'C:\WINDOWS\SapCluster\splitint.cmd'
BR0250I BR_TRACE: level 2, function BrFileStatGet exit with 'FILE_NULL'
BR0248I BR_TRACE: level 2, function BrPidGet entry with 'void'
BR0249I BR_TRACE: level 2, function BrPidGet exit with 2276
BR0248I BR_TRACE: level 2, function BrFileStatGet entry with 'K:\oracle\XE1\saptrace\background\alert_XE1.log'
BR0250I BR_TRACE: level 2, function BrFileStatGet exit with '4603437 4603437'
BR0248I BR_TRACE: level 2, function BrFileStatGet entry with 'C:\WINDOWS\SapCluster\sapftp.exe'
BR0250I BR_TRACE: level 2, function BrFileStatGet exit with 'FILE_NULL'
BR0248I BR_TRACE: level 2, function BrFileStatGet entry with 'E:\oracle\XE1\920\rdbms\admin\log'
BR0250I BR_TRACE: level 2, function BrFileStatGet exit with 'FILE_NULL'
BR0248I BR_TRACE: level 2, function BrFileStatGet entry with 'E:\oracle\XE1\920\nls'
BR0250I BR_TRACE: level 2, function BrFileStatGet exit with 'FILE_NULL'
BR0249I BR_TRACE: level 1, function BrNameSet exit with 0
BR0248I BR_TRACE: level 1, function BrInitSapRead entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'backup_mode all'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'restore_mode all'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'backup_type online'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'backup_dev_type util_file'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'backup_root_dir K:\oracle\XE1\sapbackup'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'stage_root_dir K:\oracle\XE1\sapbackup'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'compress no'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'compress_cmd S:\usr\sap\XE1\SYS\exe\run\mkszip -c $ > $'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'uncompress_cmd S:\usr\sap\XE1\SYS\exe\run\uncompress -c $ > $'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'compress_dir K:\oracle\XE1\sapreorg'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'archive_function save'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'archive_copy_dir K:\oracle\XE1\sapbackup'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'archive_stage_dir K:\oracle\XE1\sapbackup'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'tape_copy_cmd cpio'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'disk_copy_cmd copy'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'stage_copy_cmd rcp'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'cpio_flags -ovB'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'cpio_in_flags -iuvB'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'cpio_disk_flags -pdcu'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'dd_flags bs=64k'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'dd_in_flags bs=64k'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'saveset_members 1'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'copy_out_cmd dd ibs=8k obs=64k of=$'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'copy_in_cmd dd ibs=64k obs=8k if=$'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'rewind mt -f $ rewind'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'rewind_offline mt -f $ offline'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'tape_pos_cmd mt -f $ fsf $'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'tape_size 1200M'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'exec_parallel 0'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'tape_address /dev/nmt0'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'tape_address_rew /dev/mt0'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'volume_archive XE1A01'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'volume_backup XE1B01'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'expir_period 30'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'tape_use_count 100'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'util_par_file initXE1.utl'
BR0248I BR_TRACE: level 2, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.sap'
BR0250I BR_TRACE: level 2, function BrParamGet exit with 'NULL'
BR0249I BR_TRACE: level 1, function BrInitSapRead exit with 0
BR0248I BR_TRACE: level 1, function global_set entry with 'dummy'
BR0248I BR_TRACE: level 2, function BrbParCheck entry with 'dummy'
BR0248I BR_TRACE: level 3, function BrOraReplace entry with 'K:\oracle\XE1\sapbackup'
BR0250I BR_TRACE: level 3, function BrOraReplace exit with 'void'
BR0248I BR_TRACE: level 3, function BrFileStatGet entry with 'K:\oracle\XE1\sapbackup'
BR0250I BR_TRACE: level 3, function BrFileStatGet exit with '9791985 0'
BR0248I BR_TRACE: level 3, function BrOraReplace entry with 'K:\oracle\XE1\sapbackup'
BR0250I BR_TRACE: level 3, function BrOraReplace exit with 'void'
BR0248I BR_TRACE: level 3, function BrOraReplace entry with 'K:\oracle\XE1\sapreorg'
BR0250I BR_TRACE: level 3, function BrOraReplace exit with 'void'
BR0248I BR_TRACE: level 3, function BrFileStatGet entry with 'K:\oracle\XE1\sapreorg'
BR0250I BR_TRACE: level 3, function BrFileStatGet exit with '4301583 0'
BR0248I BR_TRACE: level 3, function BrOraReplace entry with 'initXE1.utl'
BR0250I BR_TRACE: level 3, function BrOraReplace exit with 'void'
BR0249I BR_TRACE: level 2, function BrbParCheck exit with 0
BR0249I BR_TRACE: level 1, function global_set exit with 0
BR0248I BR_TRACE: level 1, function BrDiskStatGet entry with 'K:\oracle\XE1\sapbackup'
BR0250I BR_TRACE: level 1, function BrDiskStatGet exit with '31996305408 31571140608 31571140608 31540309416'
BR0248I BR_TRACE: level 1, function BrBackDirBuild entry with 'K:\oracle\XE1\sapbackup'
BR0250I BR_TRACE: level 1, function BrBackDirBuild exit with 'K:\oracle\XE1\sapbackup\bdvbgsin'
BR0248I BR_TRACE: level 1, function BrDiskStatGet entry with 'K:\oracle\XE1\sapreorg'
BR0250I BR_TRACE: level 1, function BrDiskStatGet exit with '31996305408 31571140608 31571140608 31540309416'
BR0248I BR_TRACE: level 1, function BrbNameSet entry with 'void'
BR0250I BR_TRACE: level 1, function BrbNameSet exit with 'void'
BR0055I Start of database backup: bdvbgsin.aff 2007-04-17 18.30.45
BR0248I BR_TRACE: level 1, function brb_run_check entry with 'void'
BR0248I BR_TRACE: level 2, function BrPidGet entry with 'void'
BR0249I BR_TRACE: level 2, function BrPidGet exit with 2276
BR0249I BR_TRACE: level 1, function brb_run_check exit with 0
BR0248I BR_TRACE: level 1, function BrDbConnect entry with 'XE1'
BR0248I BR_TRACE: level 2, function BrOraSrvControl entry with 'TRUE'
BR0249I BR_TRACE: level 2, function BrOraSrvControl exit with -4
BR0280I BRBACKUP time stamp: 2007-04-17 18.30.45
BR0200I BR_TRACE: location BrDbConnect-2, SQL command:
'CONNECT /;'
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 0
BR0200I BR_TRACE: location BrDbConnect-3, SQL command:
'ALTER SESSION SET SQL_TRACE = TRUE;'
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 0
BR0200I BR_TRACE: location BrDbConnect-4, SQL command:
'SELECT NAME, NVL(RESETLOGS_CHANGE#, 0), NVL(TO_NUMBER(TO_CHAR(RESETLOGS_TIME, 'YYYYMMDDHH24MISS')), 0), NVL(TO_NUMBER(TO_CHAR(CREATED, 'YYYYMMDDHH24MISS')), 0) FROM V$DATABASE WHERE ROWNUM = 1;'
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 1
BR0200I BR_TRACE: location BrDbConnect-5, SQL command output:
'XE1', '1', '20060125000643', '20060125000643'
BR0200I BR_TRACE: location BrDbConnect-8, SQL command:
'SELECT TO_NUMBER(VALUE) FROM V$PARAMETER WHERE NAME = 'db_block_size';'
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 1
BR0200I BR_TRACE: location BrDbConnect-9, SQL command output:
'8192'
BR0200I BR_TRACE: location BrDbConnect-10, SQL command:
'SELECT BLOCK_SIZE FROM V$ARCHIVED_LOG WHERE ROWNUM = 1;'
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 1
BR0200I BR_TRACE: location BrDbConnect-11, SQL command output:
'512'
BR0249I BR_TRACE: level 1, function BrDbConnect exit with 0
BR0248I BR_TRACE: level 1, function BrSqlInitiate entry with 'dummy'
BR0248I BR_TRACE: level 2, function ora_vers_get entry with 'dummy'
BR0248I BR_TRACE: level 3, function BrFileStatGet entry with 'E:\oracle\XE1\920\database\spfileXE1.ora'
BR0250I BR_TRACE: level 3, function BrFileStatGet exit with '3584 3584'
BR0200I BR_TRACE: location ora_vers_get-1, SQL command:
'SELECT INSTANCE_NAME, INSTANCE_NUMBER, VERSION, HOST_NAME, ARCHIVER, NVL(PARALLEL, ' ') FROM V$INSTANCE WHERE ROWNUM = 1;'
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 1
BR0200I BR_TRACE: location ora_vers_get-2, SQL command output:
'xe1', '1', '9.2.0.6.0', 'DCBSXIT001B', 'STARTED', 'NO'
BR0248I BR_TRACE: level 3, function BrInitOraCreate entry with 'void'
BR0280I BRBACKUP time stamp: 2007-04-17 18.30.45
BR0200I BR_TRACE: location BrInitOraCreate-2, SQL command:
'CONNECT / AT PROF_CONN IN SYSOPER MODE;'
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 0
BR0200I BR_TRACE: location BrInitOraCreate-3, SQL command:
'AT PROF_CONN /* BRBACKUP */ CREATE PFILE = 'E:\oracle\XE1\920\database\sap.ora' FROM SPFILE = 'E:\oracle\XE1\920\database\spfileXE1.ora';'
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 0
BR0248I BR_TRACE: level 4, function BrFileStatGet entry with 'E:\oracle\XE1\920\database\sap.ora'
BR0250I BR_TRACE: level 4, function BrFileStatGet exit with '1300 1300'
BR0248I BR_TRACE: level 4, function BrInitOraCopy entry with 'E:\oracle\XE1\920\database\sap.ora -> E:\oracle\XE1\920\database\initXE1.ora'
BR0249I BR_TRACE: level 4, function BrInitOraCopy exit with 0
BR0477I Oracle pfile E:\oracle\XE1\920\database\initXE1.ora created from spfile E:\oracle\XE1\920\database\spfileXE1.ora
BR0280I BRBACKUP time stamp: 2007-04-17 18.30.45
BR0200I BR_TRACE: location BrInitOraCreate-4, SQL command:
'AT PROF_CONN COMMIT RELEASE;'
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 0
BR0249I BR_TRACE: level 3, function BrInitOraCreate exit with 0
BR0249I BR_TRACE: level 2, function ora_vers_get exit with 92
BR0248I BR_TRACE: level 2, function BrDbaSynCheck entry with 'W'
BR0200I BR_TRACE: location BrDbaSynCheck-1, SQL command:
'SELECT COUNT(*) FROM SAP_SDBAH WHERE BEG = '00000000000000';'
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 1
BR0200I BR_TRACE: location BrDbaSynCheck-2, SQL command output:
'0'
BR0249I BR_TRACE: level 2, function BrDbaSynCheck exit with 0
BR0248I BR_TRACE: level 2, function BrCurrRedoGet entry with 'XE1'
BR0200I BR_TRACE: location BrCurrRedoGet-3, SQL command:
'SELECT NVL(MAX(SEQUENCE#), 0), NVL(MAX(FIRST_CHANGE#), 0), NVL(TO_NUMBER(TO_CHAR(MAX(FIRST_TIME), 'YYYYMMDDHH24MISS')), 0) FROM V$LOG WHERE THREAD# = 1;'
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 1
BR0200I BR_TRACE: location BrCurrRedoGet-4, SQL command output:
'4091', '60791907', '20070417151653'
BR0249I BR_TRACE: level 2, function BrCurrRedoGet exit with 0
BR0249I BR_TRACE: level 1, function BrSqlInitiate exit with 0
BR0248I BR_TRACE: level 1, function BrDbInstProcess entry with 'XE1'
BR0248I BR_TRACE: level 2, function BrInitOraRead entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.background_dump_dest K:\oracle\XE1\saptrace\background'
BR0248I BR_TRACE: level 3, function BrOraReplace entry with 'K:\oracle\XE1\saptrace\background'
BR0250I BR_TRACE: level 3, function BrOraReplace exit with 'void'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.compatible 9.2.0'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.control_file_record_keep_time 30'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.control_files K:\oracle\XE1\origlogA\cntrl\cntrlXE1.dbf'
BR0248I BR_TRACE: level 3, function BrOraReplace entry with 'K:\oracle\XE1\origlogA\cntrl\cntrlXE1.dbf'
BR0250I BR_TRACE: level 3, function BrOraReplace exit with 'void'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.core_dump_dest K:\oracle\XE1\saptrace\background'
BR0248I BR_TRACE: level 3, function BrOraReplace entry with 'K:\oracle\XE1\saptrace\background'
BR0250I BR_TRACE: level 3, function BrOraReplace exit with 'void'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.db_block_size 8192'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.db_cache_size 257635123'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.db_file_multiblock_read_count 8'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.db_files 254'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.db_name XE1'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.dml_locks 4000'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.enqueue_resources 8000'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.fast_start_mttr_target 900'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.hash_join_enabled false'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.log_archive_dest O:\oracle\XE1\oraarch\XE1arch'
BR0248I BR_TRACE: level 3, function BrOraReplace entry with 'O:\oracle\XE1\oraarch\XE1arch'
BR0250I BR_TRACE: level 3, function BrOraReplace exit with 'void'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.log_archive_start true'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.log_buffer 1048576'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.log_checkpoint_interval 0'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.log_checkpoint_timeout 0'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.log_checkpoints_to_alert true'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.open_cursors 800'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.optimizer_features_enable 9.2.0'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.optimizer_index_cost_adj 10'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.optimizer_mode choose'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.pga_aggregate_target 343513497'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.processes 80'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.remote_os_authent true'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.sessions 96'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.sga_max_size 515270246'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.shared_pool_reserved_size 25763512'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.shared_pool_size 257635123'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.sort_area_retained_size 0'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.sort_area_size 2097152'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.statistics_level typical'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.timed_statistics true'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.transaction_auditing FALSE'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.undo_management AUTO'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.undo_retention 43200'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.undo_tablespace PSAPUNDO'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.user_dump_dest K:\oracle\XE1\saptrace\usertrace'
BR0248I BR_TRACE: level 3, function BrOraReplace entry with 'K:\oracle\XE1\saptrace\usertrace'
BR0250I BR_TRACE: level 3, function BrOraReplace exit with 'void'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with '*.workarea_size_policy AUTO'
BR0248I BR_TRACE: level 3, function BrParamGet entry with 'E:\oracle\XE1\920\database\initXE1.ora'
BR0250I BR_TRACE: level 3, function BrParamGet exit with 'NULL'
BR0249I BR_TRACE: level 2, function BrInitOraRead exit with 0
BR0249I BR_TRACE: level 1, function BrDbInstProcess exit with 0
BR0248I BR_TRACE: level 1, function BrOraDeftGet entry with 'XE1'
BR0248I BR_TRACE: level 2, function BrArchName entry with '1 XE1'
BR0248I BR_TRACE: level 3, function BrFileStatGet entry with 'O:\oracle\XE1\oraarch\XE1arch'
BR0250I BR_TRACE: level 3, function BrFileStatGet exit with 'FILE_NULL'
BR0250I BR_TRACE: level 2, function BrArchName exit with 'O:\oracle\XE1\oraarch\XE1archARC00001.001'
BR0248I BR_TRACE: level 2, function BrNameBuild entry with '43 O:\oracle\XE1\oraarch\XE1archARC00001.001 NULL'
BR0250I BR_TRACE: level 2, function BrNameBuild exit with 'O:\oracle\XE1\oraarch'
BR0250I BR_TRACE: level 1, function BrOraDeftGet exit with 'void'
BR0248I BR_TRACE: level 1, function BrLicCheck entry with 'dummy'
BR0200I BR_TRACE: location BrLicCheck-1, SQL command:
'SELECT VERSION FROM SAP_SVERS WHERE ROWNUM = 1;'
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 1
BR0200I BR_TRACE: location BrLicCheck-2, SQL command output:
'640'
BR0200I BR_TRACE: location BrLicCheck-3, SQL command:
'SELECT TABLE_OWNER FROM DBA_SYNONYMS WHERE OWNER = 'PUBLIC' AND SYNONYM_NAME = 'SAP_SDBAH';'
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 1
BR0200I BR_TRACE: location BrLicCheck-4, SQL command output:
'SAPXE1'
BR0249I BR_TRACE: level 1, function BrLicCheck exit with 0
BR0248I BR_TRACE: level 1, function BrbDbLogOpen entry with 'bdvbgsin aff 20070417183045'
BR0200I BR_TRACE: location BrbDbLogOpen-1, SQL command:
'SELECT TABLE_OWNER FROM DBA_SYNONYMS WHERE OWNER = 'PUBLIC' AND SYNONYM_NAME = 'SAP_SDBAH';'
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 1
BR0200I BR_TRACE: location BrbDbLogOpen-2, SQL command output:
'SAPXE1'
BR0200I BR_TRACE: location BrbDbLogOpen-3, SQL command:
'SELECT DATA_LENGTH FROM DBA_TAB_COLUMNS WHERE OWNER = 'SAPXE1' AND TABLE_NAME = 'DBABD' AND COLUMN_NAME = 'REDO_BEG';'
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 1
BR0200I BR_TRACE: location BrbDbLogOpen-4, SQL command output:
'18'
BR0200I BR_TRACE: location BrbDbLogOpen-5, SQL command:
'INSERT INTO SAP_SDBAH (BEG, FUNCT, SYSID, OBJ, RC, ENDE, ACTID, LINE) VALUES ('20070417183045', 'aff', 'XE1', ' ', '9999', ' ', 'bdvbgsin', ' ');'
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 1
BR0248I BR_TRACE: level 2, function BrBackIdBuild entry with 'bdvbgsin aff'
BR0250I BR_TRACE: level 2, function BrBackIdBuild exit with 'bdvbgsin.aff'
BR0248I BR_TRACE: level 2, function BrNameBuild entry with '1 bdvbgsin.aff K:\oracle\XE1\sapbackup'
BR0250I BR_TRACE: level 2, function BrNameBuild exit with 'K:\oracle\XE1\sapbackup\bdvbgsin.aff'
BR0200I BR_TRACE: location BrbDbLogOpen-13, SQL command:
'INSERT INTO SAP_DBATL (SYS_ID, OPER_ID, TASKNAME, JOB_NR, UPD_OP, TLOGNAME, STATUS, BEGIN_OP, END_OP, RC, INTERNAL) VALUES ('XE1', '20070417183045', 'Database backup', '0000000000', '20070417183045', 'K:\oracle\XE1\sapbackup\bdvbgsin.aff', 'STARTED'
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 1
BR0248I BR_TRACE: level 2, function BrBackIdBuild entry with 'bdvbgsin aff'
BR0250I BR_TRACE: level 2, function BrBackIdBuild exit with 'bdvbgsin.aff'
BR0248I BR_TRACE: level 2, function BrNameBuild entry with '1 bdvbgsin.aff K:\oracle\XE1\sapbackup'
BR0250I BR_TRACE: level 2, function BrNameBuild exit with 'K:\oracle\XE1\sapbackup\bdvbgsin.aff'
BR0200I BR_TRACE: location BrbDbLogOpen-14, SQL command:
'INSERT INTO SAP_DBAML (SYS_ID, OPER_ID, TASKNAME, JOB_NR, TRIAL, UTIL_NR, FUNC_ID, UPD_OP, TOOLSET, PROGNAME, LOG_NAME, STATUS, BEGIN_OP, END_OP, RC, INTERNAL) VALUES ('XE1', '20070417183045', 'Database backup', '0000000000', '1', '0000000000', 'aff
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 1
BR0200I BR_TRACE: location BrbDbLogOpen-17, SQL command:
'INSERT INTO SAP_DBABARL (SYS_ID, OPER_ID, TASKNAME, JOB_NR, TRIAL, UTIL_NR, FUNC_ID, UPD_OP, OBJ_TYPE, BU_TYPE, BU_METHOD) VALUES ('XE1', '20070417183045', 'Database backup', '0000000000', '1', '0000000000', 'aff', '20070417183045', 'DATABASE', 'OFF
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 1
BR0249I BR_TRACE: level 1, function BrbDbLogOpen exit with 0
BR0248I BR_TRACE: level 1, function BrLogList entry with 'XE1'
BR0200I BR_TRACE: location BrLogList-3, SQL command:
'SELECT LOG_MODE FROM V$DATABASE WHERE ROWNUM = 1;'
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 1
BR0200I BR_TRACE: location BrLogList-4, SQL command output:
'ARCHIVELOG'
BR0200I BR_TRACE: location BrLogList-5, SQL command:
'SELECT NVL(VALUE, 'NULL') FROM V$PARAMETER WHERE NAME = 'log_archive_dest_1';'
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 1
BR0200I BR_TRACE: location BrLogList-6, SQL command output:
'NULL'
BR0200I BR_TRACE: location BrLogList-7, SQL command:
'SELECT NVL(VALUE, 'NULL') FROM V$PARAMETER WHERE NAME = 'log_archive_dest';'
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 1
BR0200I BR_TRACE: location BrLogList-8, SQL command output:
'O:\oracle\XE1\oraarch\XE1arch'
BR0200I BR_TRACE: location BrLogList-9, SQL command:
'SELECT NVL(VALUE, 'NULL') FROM V$PARAMETER WHERE NAME = 'log_archive_format';'
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 1
BR0200I BR_TRACE: location BrLogList-10, SQL command output:
'ARC%S.%T'
BR0200I BR_TRACE: location BrLogList-11, SQL command:
'SELECT NVL(MAX(SEQUENCE#), 0), NVL(MAX(FIRST_CHANGE#), 0) FROM V$LOG WHERE THREAD# = 1;'
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 1
BR0200I BR_TRACE: location BrLogList-12, SQL command output:
'4091', '60791907'
BR0200I BR_TRACE: location BrLogList-13, SQL command:
'SELECT NVL(MAX(SEQUENCE#), 0) FROM V$LOG WHERE THREAD# = 1 AND ARCHIVED = 'NO';'
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 1
BR0200I BR_TRACE: location BrLogList-14, SQL command output:
'4091'
BR0200I BR_TRACE: location BrLogList-15, SQL command:
'SELECT NVL(MIN(SEQUENCE#), 0) FROM V$LOG WHERE THREAD# = 1;'
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 1
BR0200I BR_TRACE: location BrLogList-16, SQL command output:
'4088'
BR0249I BR_TRACE: level 1, function BrLogList exit with 4091
BR0248I BR_TRACE: level 1, function BrDbfInfoGet entry with 'dummy'
BR0200I BR_TRACE: location BrDbfInfoGet-1, SQL command:
'OPEN CURSOR curs_2 FOR
SELECT TS.TABLESPACE_NAME, TS.STATUS, TS.CONTENTS, TS.EXTENT_MANAGEMENT, DF.FILE_NAME, DF.FILE_ID, NVL(DF.STATUS, ' '), NVL(DF.BYTES, 0), NVL(DF.AUTOEXTENSIBLE, 'NO'), NVL(DF.MAXBYTES, 0), NVL(DF.INCREMENT_BY, 0) FROM DBA_TABLESPACES TS, DBA_DATA_FIL
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 0
BR0200I BR_TRACE: location BrDbfInfoGet-2, SQL command:
'FETCH curs_2;'
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 1
BR0200I BR_TRACE: location BrDbfInfoGet-3, SQL command output:
'PSAPTEMP', 'ONLINE', 'TEMPORARY', 'LOCAL', 'N:\ORACLE\XE1\SAPDATA3\TEMP_1\TEMP.DATA1', '-1', 'AVAILABLE', '629145600', 'YES', '4194304000', '2560'
BR0248I BR_TRACE: level 2, function BrFileStatGet entry with 'N:\ORACLE\XE1\SAPDATA3\TEMP_1\TEMP.DATA1'
BR0250I BR_TRACE: level 2, function BrFileStatGet exit with '629153792 629153792'
BR0248I BR_TRACE: level 2, function BrDiskInsert entry with 'N:\ORACLE\XE1\SAPDATA3\TEMP_1\TEMP.DATA1'
BR0248I BR_TRACE: level 3, function BrDiskStatGet entry with 'N:\ORACLE\XE1\SAPDATA3\TEMP_1\TEMP.DATA1'
BR0250I BR_TRACE: level 3, function BrDiskStatGet exit with '63992492032 8746655744 8746655744 8738114088'
BR0248I BR_TRACE: level 3, function BrNameBuild entry with '46 N:\ORACLE\XE1\SAPDATA3\TEMP_1 NULL'
BR0250I BR_TRACE: level 3, function BrNameBuild exit with 'N:\ORACLE\XE1\SAPDATA3'
BR0250I BR_TRACE: level 2, function BrDiskInsert exit with 00217958
BR0248I BR_TRACE: level 2, function BrNameBuild entry with '43 N:\ORACLE\XE1\SAPDATA3\TEMP_1\TEMP.DATA1 NULL'
BR0250I BR_TRACE: level 2, function BrNameBuild exit with 'N:\ORACLE\XE1\SAPDATA3\TEMP_1'
BR0248I BR_TRACE: level 2, function BrLinkGet entry with 'N:\ORACLE\XE1\SAPDATA3\TEMP_1'
BR0250I BR_TRACE: level 2, function BrLinkGet exit with FFFFFFFF
BR0248I BR_TRACE: level 2, function BrNameBuild entry with '43 N:\ORACLE\XE1\SAPDATA3\TEMP_1\TEMP.DATA1 NULL'
BR0250I BR_TRACE: level 2, function BrNameBuild exit with 'N:\ORACLE\XE1\SAPDATA3\TEMP_1'
BR0248I BR_TRACE: level 2, function BrLinkGet entry with 'N:\ORACLE\XE1\SAPDATA3\TEMP_1'
BR0250I BR_TRACE: level 2, function BrLinkGet exit with FFFFFFFF
BR0200I BR_TRACE: location BrDbfInfoGet-9, SQL command:
'FETCH curs_2;'
BR0300I BR_TRACE: SQL code: 0, number of processed rows: 2
BR0200I BR_TRACE: location BrDbfInfoGet-3, SQL command output:
'PSAPUNDO', 'ONLINE', 'UNDO', 'LOCAL', 'M:\ORACLE\XE1\SAPDATA2\UNDO_1\UNDO.DATA1', '2', 'AVAILABLE', '2852126720', 'YES', '10485760000', '2560'
BR0248I BR_TRACE: level 2, function BrFileStatGet entry with 'M:\ORACLE\XE1\SAPDATA2\UNDO_1\UNDO.DATA1'
BR0250I BR_TRACE: level 2, function BrFileStatGet exit with '2852134912 2852134912'
BR0248I BR_TRACE: level 2, function BrDiskInsert entry with 'M:\ORACLE\XE1\SAPDATA2\UNDO_1\UNDO.DATA1'
BR0248I BR_TRACE: level 3, function BrDiskStatGet entry with 'M:\ORACLE\XE1\SAPDATA2\UNDO_1\UNDO.DATA1'
BR0250I BR_TRACE: level 3, function BrDiskStatGet exit with '63992492032 48279314432 48279314432 48232166664'
BR0248I BR_TRACE: level 3, function BrNameBuild entry with '46 M:\ORACLE\XE1\SAPDATA2\UNDO_1 NULL'
BR0250I BR_TRACE: level 3, function BrNameBuild exit with 'M:\ORACLE\XE1\SAPDATA2'
BR0250I BR_TRACE: level 2, function BrDiskInsert exit with 0021A168
BR0248I BR_TRACE: level 2, function BrNameBuild entry with '43 M:\ORACLE\XE1\SAPDATA2\UNDO_1\UNDO.DATA1 NULL'
BR0250I BR_TRACE: level 2, function BrNameBuild exit with 'M:\ORACLE\XE1\SAPDATA2\UNDO_1'
BR0248I BR_TRACEHi Peter,
Thanks for the valuable input.
We have already implemented note 378648 i.e these all parameters are already there under sidadm user in DB node.
BR_OFS=1
BR_OFS_RESOURCE=< database_resource_name>
BR_OFS_CLUSTER=< cluster_name>
BR_OFS_USER=<user_name>
BR_OFS_DOMAIN=<domain>
BR_OFS_PWD=<password>
registry HKEY_LOCAL_MACHINE/Software/Oracle/HomeX ORA_<SID>_AUTOSTART is having value false.
Please guide what could be the other possible reason?
Regards
Praveen -
DPM 2012 R2 All backups fail with recovery point volume not available after resizing OS disk
I resized the C drive partition of my DPM server (the data is on a separate dedicated array) and everything failed. I put it back but everything is still failing with the same problem as here:
DPM 2007: The recovery point volume is not available?
I've run chkdsk for a couple and both have given the following after doing 3 stages:
Windows has scanned the file system and found no problems.
No further action is required.
The backups still fail and the only error information I can find in the event logs is:
Backup job for datasource: Online\<VM name> on production server: <host FQDN> failed.
How can I find out what the problem actually is?
Is it possible to resize the C drive containing a DPM install? If so what can it be safely resized to? It easily met the minimum requirements and I don't know of anything in the documentation that says resizing the OS disk may cause issues.
Preparing your environment for System Center 2012 R2 Data Protection Manager (DPM)Hi,
Resizing the boot partition (usually C:) should not effect DPM in any way. DPM writes directly to it's volumes contained in the storage pool and not through the mount points on the C: drive. So is the DPM UI showing
missing volume next to some data sources ? Try doing a DPM disk rescan and see if that removes the missing volume flag.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights. -
Hi all
As many others I am facing also connection problems with Windows Server 2012 Essentials R2 and a windows client pc.
The client pc in question, with windows 8 pro, has been successfully joined through the essentials connector to the domain.
All things went good: media streaming, shared folders, a successfull backup has been started through the essentials launchpad, the client appeared as online in the devices tab of the essentials dashboard.
Then I upgraded the pc to windows 8.1 pro.
Now the client can't connect to the server. Following issues appear:
The client pc is showed as offline the the dashboard when it is online.
Backups (from launchpad or server) aren't possible -> no connection to the windows server essentials adminitration service.
Dashboard not available from launchpad
The message "the server is not available" appears, when I try to reconnect the client by the essentials connector.
BUT:
ping to the server's ip address works.
media streaming is also ok
shared folders are still available.
Any ideas what changed with the upgrade to 8.1 Pro? Is the a firewall problem on the client pc?
Many thanks for your help.
PS. If anyone needs a specific log file from the server or the client, please let me know.Hi Justin
I executed all you instructions, but nothing helped.
I add here the ClientDeploy.log and the ComputerConnector.log
The ClientDeploy stopps after a registry insert error.
The user executing the connector is member of the Administrators Group on the Client pc.
I started the connector even with "Run as Administrator" but nothing helped.
Any ideas why this registry insert failes?
Thanks for you help and best regards
Hans
[5692] 140604.211748.1774: ClientSetup: Start of ClientDeploy
[5692] 140604.211748.3181: General: Initializing...C:\WINDOWS\system32\Essentials\ClientDeploy.exe
[5692] 140604.211748.3337: ClientSetup: Create client deployment registry subkey if necessary
[5692] 140604.211748.3493: ClientSetup: The initial launching way: -LaunchedFrom:installer
[5692] 140604.211748.3493: ClientSetup: The initial state is set
[5692] 140604.211748.3493: ClientSetup: The initial serverName: 192.168.3.21
[5692] 140604.211748.3493: ClientSetup: Loading Wizard Data
[5692] 140604.211748.3649: ClientSetup: Saving Wizard Data
[5692] 140604.211748.3649: ClientSetup: Current DeploymentStatus=Start
[5692] 140604.211748.7400: ClientSetup: Showing the Client Deployment Wizard
[5692] 140604.211748.8493: ClientSetup: Machine name:PCFA, length:4
[5692] 140604.211748.8650: ClientSetup: The input server name is 192.168.3.21
[2156] 140604.211748.8806: ClientSetup: Entering ConnectorWizardForm.RunTasks
[2156] 140604.211748.8806: ClientSetup: Running Task with Id=ClientDeploy.PreConfiguration
[5692] 140604.211748.8962: ClientSetup: InitWizard, The currrent stage is ConnectingToServer
[5692] 140604.211748.8962: ClientSetup: Set the Deployment Sync Event
[2156] 140604.211748.8962: ClientSetup: The configuration cab will be downloaded from 192.168.3.21
[2156] 140604.211748.9118: ClientSetup: Download file Setup.cab from server
[2156] 140604.211748.9275: ClientSetup: Making web request:
https://192.168.3.21//connect/default.aspx?Get=Setup.cab&LanguageId=1031&64bit=1
[2156] 140604.211748.9743: ClientSetup: Failed to download Setup.cab from server: System.Net.WebException: Die zugrunde liegende Verbindung wurde geschlossen: Für den geschützten SSL/TLS-Kanal konnte keine Vertrauensstellung hergestellt werden.. ---> System.Security.Authentication.AuthenticationException:
Das Remotezertifikat ist laut Validierungsverfahren ungültig.
bei System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception)
bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
bei System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
bei System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
bei System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
bei System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
bei System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
bei System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
bei System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
bei System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
bei System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
bei System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
bei System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
bei System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
bei System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
bei System.Net.ConnectStream.WriteHeaders(Boolean async)
--- Ende der internen Ausnahmestapelüberwachung ---
bei System.Net.HttpWebRequest.GetResponse()
bei Microsoft.WindowsServerSolutions.ClientSetup.CSCommon.DownloadFileFromConnectSite(String outputDirectory, Uri serverUrl, String fileName, Int32 languageId, Boolean is64bit)
[2156] 140604.211748.9743: ClientSetup: Cannot get configuration file with https, will try http...
[2156] 140604.211748.9743: ClientSetup: Download file Setup.cab from server
[2156] 140604.211748.9743: ClientSetup: Making web request:
http://192.168.3.21//connect/default.aspx?Get=Setup.cab&LanguageId=1031&64bit=1
[2156] 140604.211749.0369: ClientSetup: Downloaded file C:\WINDOWS\Temp\ClientDeploymentTempFiles\Setup.cab
[2156] 140604.211749.0369: ClientSetup: The configuration cab is downloaded to C:\WINDOWS\Temp\ClientDeploymentTempFiles\Setup.cab
[2156] 140604.211749.1775: ClientSetup: Adding Server Info data in the Product Registry
[2156] 140604.211749.1931: DnsEnvironmentDetector: GetHostAddresses() returned 192.168.3.21, normal environment
[2156] 140604.211749.1931: ClientSetup: Exiting PreConfigTask.Run()
[2156] 140604.211749.1931: ClientSetup: Task with Id=ClientDeploy.PreConfiguration has TaskStatus=Success
[2156] 140604.211749.1931: ClientSetup: Task with Id=ClientDeploy.PreConfiguration has RebootStatus=NoReboot
[2156] 140604.211749.1931: ClientSetup: Exting ConnectorWizardForm.RunTasks
[5792] 140604.211758.0217: ClientSetup: Running InstallRootCert Task at WizardPage DomainUserCred
[5792] 140604.211758.0373: ClientSetup: Entering ConnectorWizardForm.RunTasks
[5792] 140604.211758.0373: ClientSetup: Running Task with Id=ClientDeploy.InstallRootCertTask
[5792] 140604.211758.0373: ClientSetup: Entering InstallRootCertTask.Run
[5792] 140604.211758.0373: ClientSetup: Install root cert to local trusted store
[5792] 140604.211758.0373: ClientSetup: Exiting InstallRootCertTask.Run
[5792] 140604.211758.0373: ClientSetup: Task with Id=ClientDeploy.InstallRootCertTask has TaskStatus=Success
[5792] 140604.211758.0373: ClientSetup: Task with Id=ClientDeploy.InstallRootCertTask has RebootStatus=NoReboot
[5792] 140604.211758.0373: ClientSetup: Exting ConnectorWizardForm.RunTasks
[5792] 140604.211758.0373: ClientSetup: Running SetupVPNAndDA Task at WizardPage DomainUserCred
[5792] 140604.211758.0373: ClientSetup: Entering ConnectorWizardForm.RunTasks
[5792] 140604.211758.0373: ClientSetup: Running Task with Id=ClientDeploy.SetupVpnAndDATask
[5792] 140604.211758.0529: ClientSetup: Entering SetupVpnAndDATask.Run
[5792] 140604.211758.0685: ClientSetup: Deploy VPN profile
[5792] 140604.211758.0998: ClientSetup: Exting SetupVpnAndDATask.Run
[5792] 140604.211758.0998: ClientSetup: Task with Id=ClientDeploy.SetupVpnAndDATask has TaskStatus=Success
[5792] 140604.211758.0998: ClientSetup: Task with Id=ClientDeploy.SetupVpnAndDATask has RebootStatus=NoReboot
[5792] 140604.211758.0998: ClientSetup: Exting ConnectorWizardForm.RunTasks
[5792] 140604.211758.0998: ClientSetup: Running ValidateUser Tasks at WizardPage DomainUserCred
[5792] 140604.211758.0998: ClientSetup: Entering ConnectorWizardForm.RunTasks
[5792] 140604.211758.0998: ClientSetup: Running Task with Id=ClientDeploy.ValidateUser
[5792] 140604.211758.0998: ClientSetup: Entering ValidateUserTask.Run
[5792] 140604.211758.0998: ClientSetup: Validating User
[5792] 140604.211758.0998: ClientSetup: Call MachineIdentityManager.GetMachineStatus
[5792] 140604.211758.1779: ClientSetup: MachineIdentityManager.GetMachineStatus had errors: ErrorCatalog:NetworkError ErrorCode:-1
BaseException: Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityException: MachineIdentityManager.GetMachineStatus ---> System.ServiceModel.Security.SecurityNegotiationException: Es konnte keine Vertrauensstellung für den sicheren SSL/TLS-Kanal
mit Autorität mars01:65500 eingerichtet werden. ---> System.Net.WebException: Die zugrunde liegende Verbindung wurde geschlossen: Für den geschützten SSL/TLS-Kanal konnte keine Vertrauensstellung hergestellt werden.. ---> System.Security.Authentication.AuthenticationException:
Das Remotezertifikat ist laut Validierungsverfahren ungültig.
bei System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception)
bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
bei System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
bei System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
bei System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
bei System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
bei System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
bei System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
bei System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
bei System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
bei System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
bei System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
bei System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
bei System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
bei System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
bei System.Net.ConnectStream.WriteHeaders(Boolean async)
--- Ende der internen Ausnahmestapelüberwachung ---
bei System.Net.HttpWebRequest.GetResponse()
bei System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
--- Ende der internen Ausnahmestapelüberwachung ---
Server stack trace:
bei System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)
bei System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
bei System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
bei System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
bei System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
bei System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
bei System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
bei System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
bei Microsoft.WindowsServerSolutions.Devices.Identity.CertWebService.ICertService.GetMachineStatus(GetMachineStatusRequest request)
bei Microsoft.WindowsServerSolutions.Devices.Identity.CertWebService.CertServiceClient.GetMachineStatus(String userName, String password, String machineName, MachineStatus& status, Boolean& isAdmin, Int32& maxClientNum, Int32& currentClientNum)
bei Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityManager.GetMachineStatus(String serverName, String userName, String password, String machineName, Boolean& isAdmin)
--- Ende der internen Ausnahmestapelüberwachung ---
bei Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityManager.GetMachineStatus(String serverName, String userName, String password, String machineName, Boolean& isAdmin)
bei Microsoft.WindowsServerSolutions.ClientSetup.ClientDeploy.ValidateUserTask.Run(WizData data)
[5792] 140604.211758.1779: ClientSetup: ProcessHelper.StartProcessWithRedirectOutput() Executing "C:\WINDOWS\system32\ipconfig.exe" /all
[2156] 140604.211758.2092: ClientSetup: Standard Ouptput:
[2156] 140604.211758.2092: ClientSetup: Standard Ouptput: Windows-IP-Konfiguration
[2156] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Hostname . . . . . . . . . . . . : PCFA
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Prim„res DNS-Suffix . . . . . . . : mydomain.local
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Knotentyp . . . . . . . . . . . . : Hybrid
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: IP-Routing aktiviert . . . . . . : Nein
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: WINS-Proxy aktiviert . . . . . . : Nein
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: DNS-Suffixsuchliste . . . . . . . : mydomain.local
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Drahtlos-LAN-Adapter LAN-Verbindung* 11:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Medienstatus. . . . . . . . . . . : Medium getrennt
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Verbindungsspezifisches DNS-Suffix:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Beschreibung. . . . . . . . . . . : Virtueller Microsoft-Adapter fr direktes WiFi
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Physische Adresse . . . . . . . . : 16-
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: DHCP aktiviert. . . . . . . . . . : Ja
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Autokonfiguration aktiviert . . . : Ja
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Ethernet-Adapter LAN-Verbindung:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Verbindungsspezifisches DNS-Suffix:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Beschreibung. . . . . . . . . . . : Broadcom NetLink (TM)-Gigabit-Ethernet
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Physische Adresse . . . . . . . . : DC-
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: DHCP aktiviert. . . . . . . . . . : Ja
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Autokonfiguration aktiviert . . . : Ja
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: IPv4-Adresse . . . . . . . . . . : 192.168.2.6(Bevorzugt)
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Subnetzmaske . . . . . . . . . . : 255.255.255.0
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Lease erhalten. . . . . . . . . . : Mittwoch, 4. Juni 2014 18:03:36
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Lease l„uft ab. . . . . . . . . . : Freitag, 6. Juni 2014 20:49:17
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Standardgateway . . . . . . . . . : 192.168.2.1
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: DHCP-Server . . . . . . . . . . . : 192.168.2.1
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: DNS-Server . . . . . . . . . . . : 192.168.3.21
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
192.168.1.52
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: NetBIOS ber TCP/IP . . . . . . . : Aktiviert
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Drahtlos-LAN-Adapter WiFi:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Medienstatus. . . . . . . . . . . : Medium getrennt
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Verbindungsspezifisches DNS-Suffix: Home
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Beschreibung. . . . . . . . . . . : Qualcomm Atheros AR5B97-Funknetzwerkadapter
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Physische Adresse . . . . . . . . : 94-
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: DHCP aktiviert. . . . . . . . . . : Ja
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Autokonfiguration aktiviert . . . : Ja
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Tunneladapter isatap.{8F57A34A-FE47-429C-97D0-AA777D79C23F}:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Medienstatus. . . . . . . . . . . : Medium getrennt
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Verbindungsspezifisches DNS-Suffix:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Beschreibung. . . . . . . . . . . : Microsoft-ISATAP-Adapter
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Physische Adresse . . . . . . . . : 00-00-00-00-00-00-00-E0
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: DHCP aktiviert. . . . . . . . . . : Nein
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Autokonfiguration aktiviert . . . : Ja
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[4504] 140604.211758.2092: ClientSetup: Standard Error:
[5792] 140604.211758.2248: ClientSetup: The exit code of the process (C:\WINDOWS\system32\ipconfig.exe) is: 0
[5792] 140604.211758.2248: ClientSetup: ProcessHelper.StartProcessWithRedirectOutput() Executing "C:\WINDOWS\system32\route.exe" print
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: ===========================================================================
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: Schnittstellenliste
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: 9...16 39 e5 4c c5 f2 ......Virtueller Microsoft-Adapter fr direktes WiFi
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: 4...dc 0e a1 06 1f c9 ......Broadcom NetLink (TM)-Gigabit-Ethernet
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: 3...94 39 e5 4c c5 f2 ......Qualcomm Atheros AR5B97-Funknetzwerkadapter
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: 1...........................Software Loopback Interface 1
[1344] 140604.211758.2404: ClientSetup: Standard Error:
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: 5...00 00 00 00 00 00 00 e0 Microsoft-ISATAP-Adapter
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: ===========================================================================
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: IPv4-Routentabelle
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: ===========================================================================
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: Aktive Routen:
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: Netzwerkziel Netzwerkmaske Gateway Schnittstelle Metrik
[5792] 140604.211758.2404: ClientSetup: The exit code of the process (C:\WINDOWS\system32\route.exe) is: 0
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: 0.0.0.0 0.0.0.0 192.168.2.1
192.168.2.6 10
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: 127.0.0.0 255.0.0.0 Auf Verbindung 127.0.0.1
306
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: 127.0.0.1 255.255.255.255 Auf Verbindung 127.0.0.1 306
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: 127.255.255.255 255.255.255.255 Auf Verbindung 127.0.0.1 306
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: 192.168.2.0 255.255.255.0 Auf Verbindung 192.168.2.6 266
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: 192.168.2.6 255.255.255.255 Auf Verbindung 192.168.2.6 266
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: 192.168.2.255 255.255.255.255 Auf Verbindung 192.168.2.6 266
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: 224.0.0.0 240.0.0.0 Auf Verbindung 127.0.0.1
306
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: 224.0.0.0 240.0.0.0 Auf Verbindung 192.168.2.6
266
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: 255.255.255.255 255.255.255.255 Auf Verbindung 127.0.0.1 306
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: 255.255.255.255 255.255.255.255 Auf Verbindung 192.168.2.6 266
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: ===========================================================================
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: St„ndige Routen:
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: Keine
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:
[5792] 140604.211758.2404: ClientSetup: ProcessHelper.StartProcessWithRedirectOutput() Executing "C:\WINDOWS\system32\nslookup.exe" mars01
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: IPv6-Routentabelle
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: ===========================================================================
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: Aktive Routen:
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: If Metrik Netzwerkziel Gateway
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: 1 306 ::1/128 Auf Verbindung
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: 1 306 ff00::/8 Auf Verbindung
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: ===========================================================================
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: St„ndige Routen:
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: Keine
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput: Server: UnKnown
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput: Address: 192.168.3.21
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput: Name: mars01.mydomain.local
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput: Addresses: 192.168.3.21
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput: 192.168.1.131
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput: 192.168.4.31
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput:
[4504] 140604.211758.2560: ClientSetup: Standard Error:
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput:
[5792] 140604.211758.2560: ClientSetup: The exit code of the process (C:\WINDOWS\system32\nslookup.exe) is: 0
[5792] 140604.211758.2717: ClientSetup: Set CD Fail reason 10 for SQM in ClientDeployment.exe
[5792] 140604.211758.2717: ClientSetup: RecordClientDeploymentFailReason: Save registry failed in ClientDeployment.exe : System.UnauthorizedAccessException: In den Registrierungsschlüssel kann nicht geschrieben werden.
bei Microsoft.Win32.RegistryKey.EnsureWriteable()
bei Microsoft.Win32.RegistryKey.CreateSubKeyInternal(String subkey, RegistryKeyPermissionCheck permissionCheck, Object registrySecurityObj, RegistryOptions registryOptions)
bei Microsoft.Win32.RegistryKey.CreateSubKey(String subkey, RegistryKeyPermissionCheck permissionCheck)
bei Microsoft.WindowsServerSolutions.ClientSetup.ClientDeploy.Helper.RecordClientDeploymentFailReason(UInt32 failReason)
[5792] 140604.211758.2717: ClientSetup: Exiting ValidateUserTask.Run
[5792] 140604.211758.2717: ClientSetup: Task with Id=ClientDeploy.ValidateUser has TaskStatus=Failed
[5792] 140604.211758.2717: ClientSetup: Task with Id=ClientDeploy.ValidateUser has RebootStatus=NoReboot
[5792] 140604.211758.2717: ClientSetup: Exting ConnectorWizardForm.RunTasks
[06/04/2014 20:23:38 1730] --------------------------------------------------------------------------------------------------
[06/04/2014 20:23:38 1730] wmain: Start of Computerconnector
[06/04/2014 20:23:38 1730] GlobalData::Initialize (192.168.3.10, C:\Users\johndoe.mydomain\Downloads\ComputerConnector(192.168.3.10).exe)
[06/04/2014 20:23:38 1730] =================================
[06/04/2014 20:23:38 1730] Current Os information:
[06/04/2014 20:23:38 1730] Suite = [256]
[06/04/2014 20:23:38 1730] Type = [1]
[06/04/2014 20:23:38 1730] Architecture = [9]
[06/04/2014 20:23:38 1730] IsStarterEdition = [0]
[06/04/2014 20:23:38 1730] IsHomeSku = [0]
[06/04/2014 20:23:38 1730] Major = [6]
[06/04/2014 20:23:38 1730] Minor = [3]
[06/04/2014 20:23:38 1730] Build = [9600]
[06/04/2014 20:23:38 1730] SPMajor = [0]
[06/04/2014 20:23:38 1730] SPMinor = [0]
[06/04/2014 20:23:38 1730] =================================
[06/04/2014 20:23:38 1730] ExpandEnvironmentStrings return (C:\WINDOWS\Temp\ClientDeploymentTempFiles\)
[06/04/2014 20:23:38 1730] SetPackageDlcUrl: .NET url is set to
http://go.microsoft.com/?linkid=9816306
[06/04/2014 20:23:38 1730] SetPackageDlcUrl: Connector url is set to
http://go.microsoft.com/fwlink/p/?LinkId=275102
[06/04/2014 20:23:38 1730] wmain: Calling Computerconnector::ShowWizard()
[06/04/2014 20:23:38 1730] CComputerconnector::ShowWizard: Initializing common controls
[06/04/2014 20:23:38 1730] CComputerconnector::ShowWizard: Done initializing common controls
[06/04/2014 20:23:38 1730] Displaying the wizard
[06/04/2014 20:23:38 1730] CComputerconnector::WelcomeDlgProc: IDD_PROPPAGE_WELCOME Page Initialization
[06/04/2014 20:23:38 1730] Current user default UI lang setting is 1031
[06/04/2014 20:23:38 c8] CComputerconnector::Run: Installation is ready to run
[06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: IDD_PROPPAGE_TASKS Page Initialization
[06/04/2014 20:23:42 1774] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Die aktuellen Systemanforderungen werden ermittelt... Index= 0
[06/04/2014 20:23:42 1774] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {21E49794-7C13-4E84-8659-55BD378267D5} returned -1
[06/04/2014 20:23:42 1774] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {46DCED50-3A1D-4EF4-94F0-45F2681E3D70} returned -1
[06/04/2014 20:23:42 1774] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {C1E4D639-4A33-4314-809E-89BD0EF48522} returned -1
[06/04/2014 20:23:42 1774] Connector installation state is 1
[06/04/2014 20:23:42 1774] CComputerconnector::RunTasks: Running Task: Id=-1 Description=.NET Framework 4.5 wird heruntergeladen... Index= 1
[06/04/2014 20:23:42 1774] CComputerconnector::RunTasks: Running Task: Id=-1 Description=.NET Framework 4.5 wird installiert... Index= 2
[06/04/2014 20:23:42 1774] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Der Connector wird heruntergeladen... Index= 3
[06/04/2014 20:23:42 1774] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Windows Server Essentials Connector wird installiert... Index= 4
[06/04/2014 20:23:42 1774] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Die Einrichtung von Windows Server Essentials Connector wird gestartet... Index= 5
[06/04/2014 20:23:42 1774] RunShellExecute: ShellExecute [C:\WINDOWS\system32\Essentials\ClientDeploy.exe] with parameters [ -Server:192.168.3.10 -LaunchedFrom:installer]
[06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_UPDATE: Running
[06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Die aktuellen Systemanforderungen werden ermittelt...
[06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: .NET Framework 4.5 wird heruntergeladen...
[06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: .NET Framework 4.5 wird installiert...
[06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Der Connector wird heruntergeladen...
[06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Windows Server Essentials Connector wird installiert...
[06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Die Einrichtung von Windows Server Essentials Connector wird gestartet...
[06/04/2014 20:23:42 1774] CComputerconnector::Run: Waiting upto 60secs for Sync Event to be signaled
[06/04/2014 20:23:43 1774] CComputerconnector::Run: WaitForSingleObject RetVal = 0
[06/04/2014 20:23:43 1730] CComputerconnector::TaskDlgProc: DIALOG_UPDATE: Success
[06/04/2014 20:23:43 1730] wmain: End of Computerconnector: hr=0x0
[06/04/2014 20:54:06 1220] --------------------------------------------------------------------------------------------------
[06/04/2014 20:54:06 1220] wmain: Start of Computerconnector
[06/04/2014 20:54:06 1220] GlobalData::Initialize (192.168.3.10, C:\Users\johndoe.mydomain\Downloads\ComputerConnector(192.168.3.10)(1).exe)
[06/04/2014 20:54:06 1220] =================================
[06/04/2014 20:54:06 1220] Current Os information:
[06/04/2014 20:54:06 1220] Suite = [256]
[06/04/2014 20:54:06 1220] Type = [1]
[06/04/2014 20:54:06 1220] Architecture = [9]
[06/04/2014 20:54:06 1220] IsStarterEdition = [0]
[06/04/2014 20:54:06 1220] IsHomeSku = [0]
[06/04/2014 20:54:06 1220] Major = [6]
[06/04/2014 20:54:06 1220] Minor = [3]
[06/04/2014 20:54:06 1220] Build = [9600]
[06/04/2014 20:54:06 1220] SPMajor = [0]
[06/04/2014 20:54:06 1220] SPMinor = [0]
[06/04/2014 20:54:06 1220] =================================
[06/04/2014 20:54:06 1220] ExpandEnvironmentStrings return (C:\WINDOWS\Temp\ClientDeploymentTempFiles\)
[06/04/2014 20:54:06 1220] SetPackageDlcUrl: .NET url is set to
http://go.microsoft.com/?linkid=9816306
[06/04/2014 20:54:06 1220] SetPackageDlcUrl: Connector url is set to
http://go.microsoft.com/fwlink/p/?LinkId=275102
[06/04/2014 20:54:06 1220] wmain: Calling Computerconnector::ShowWizard()
[06/04/2014 20:54:06 1220] CComputerconnector::ShowWizard: Initializing common controls
[06/04/2014 20:54:06 1220] CComputerconnector::ShowWizard: Done initializing common controls
[06/04/2014 20:54:06 1220] Displaying the wizard
[06/04/2014 20:54:06 1220] CComputerconnector::WelcomeDlgProc: IDD_PROPPAGE_WELCOME Page Initialization
[06/04/2014 20:54:06 1220] Current user default UI lang setting is 1031
[06/04/2014 20:54:06 1404] CComputerconnector::Run: Installation is ready to run
[06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: IDD_PROPPAGE_TASKS Page Initialization
[06/04/2014 20:54:09 e90] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Die aktuellen Systemanforderungen werden ermittelt... Index= 0
[06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_UPDATE: Running
[06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Die aktuellen Systemanforderungen werden ermittelt...
[06/04/2014 20:54:09 e90] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {21E49794-7C13-4E84-8659-55BD378267D5} returned -1
[06/04/2014 20:54:09 e90] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {46DCED50-3A1D-4EF4-94F0-45F2681E3D70} returned -1
[06/04/2014 20:54:09 e90] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {C1E4D639-4A33-4314-809E-89BD0EF48522} returned -1
[06/04/2014 20:54:09 e90] Connector installation state is 1
[06/04/2014 20:54:09 e90] CComputerconnector::RunTasks: Running Task: Id=-1 Description=.NET Framework 4.5 wird heruntergeladen... Index= 1
[06/04/2014 20:54:09 e90] CComputerconnector::RunTasks: Running Task: Id=-1 Description=.NET Framework 4.5 wird installiert... Index= 2
[06/04/2014 20:54:09 e90] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Der Connector wird heruntergeladen... Index= 3
[06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: .NET Framework 4.5 wird heruntergeladen...
[06/04/2014 20:54:09 e90] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Windows Server Essentials Connector wird installiert... Index= 4
[06/04/2014 20:54:09 e90] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Die Einrichtung von Windows Server Essentials Connector wird gestartet... Index= 5
[06/04/2014 20:54:09 e90] RunShellExecute: ShellExecute [C:\WINDOWS\system32\Essentials\ClientDeploy.exe] with parameters [ -Server:192.168.3.10 -LaunchedFrom:installer]
[06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: .NET Framework 4.5 wird installiert...
[06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Der Connector wird heruntergeladen...
[06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Windows Server Essentials Connector wird installiert...
[06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Die Einrichtung von Windows Server Essentials Connector wird gestartet...
[06/04/2014 20:54:09 e90] CComputerconnector::Run: Waiting upto 60secs for Sync Event to be signaled
[06/04/2014 20:54:13 e90] CComputerconnector::Run: WaitForSingleObject RetVal = 0
[06/04/2014 20:54:13 1220] CComputerconnector::TaskDlgProc: DIALOG_UPDATE: Success
[06/04/2014 20:54:13 1220] wmain: End of Computerconnector: hr=0x0 -
Instance startup problem after offline backup
Hi,
We have scheduled an offline backup of our NW2004s ABAP + Java system through brtools.But after the offline backup instance is not coming up automatically.After going though the instance work directory I found the following problem in dev_ms file.
Once we come across this problem we have to restart the server to make it work.
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 516428] Wed Feb 28 06:19:34 2007
[Thr 516428] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 73
intno 20050900
make: multithreaded, Unicode, optimized
pid 516440
[Thr 516428] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 516440) [msxxserv.c 1824]
[Thr 516428] ***LOG Q0I=> NiIListen: listen (10055: WSAENOBUFS: No buffer space available) [nixxi.cpp 2315]
[Thr 516428] *** ERROR => NiIListen: SiListen failed for hdl 0 / sock 1796
(SI_ESYSCALL; I4; ST) [nixxi.cpp 2315]
[Thr 516428] *** ERROR => MsSCommInit: NiBufListen(sapmsTKD) (rc=NIEINTERN) [msxxserv.c 10107]
[Thr 516428] *** ERROR => MsSInit: MsSCommInit [msxxserv.c 1857]
[Thr 516428] *** ERROR => main: MsSInit [msxxserv.c 5890]
[Thr 516428] ***LOG Q02=> MsSHalt, MSStop (Msg Server 516440) [msxxserv.c 5938]
Your views to solve this issue will be helpful.
Regards,
Vinayakwell that follows after a memory shortage of the windows 32 Bit operating system itself.
I would <b>strongly recommend not to run 700 unicode based system on 32 bit platforms</b>
see also note <a href="http://service.sap.com/sap/support/notes/990538">990538</a>
and <a href="http://service.sap.com/sap/support/notes/996600">996600</a> -
LVM Volumes not available after update
Hi All!
I haven't updated my system for about two months and today I updated it. Now I have the problem that I cannot boot properly. I have my root partition in an LVM volume and on boot I get the message
ERROR: device 'UUID=xxx' not found. Skipping fs
ERROR: Unable to find root device 'UUID=xxx'
After that I land in the recovery shell. After some research I found, that "lvm lvdisplay" showed that my volumes where not available and I had to reenable them with "lvm vgchange -a y".
Issuing any lvm command also produced the following warning:
WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
Anyway, after issuing the commands and exiting the recovery shell, the system booted again. However, I would prefer being able to boot without manual actions.
Thanks in advance!
Further information:
vgdisplay
--- Volume group ---
VG Name ArchLVM
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 3
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 2
Open LV 1
Max PV 0
Cur PV 1
Act PV 1
VG Size 232.69 GiB
PE Size 4.00 MiB
Total PE 59568
Alloc PE / Size 59568 / 232.69 GiB
Free PE / Size 0 / 0
VG UUID SoB3M1-v1fD-1abI-PNJ3-6IOn-FfdI-0RoLK5
lvdisplay (LV Status was 'not available' right after booting)
--- Logical volume ---
LV Path /dev/ArchLVM/Swap
LV Name Swap
VG Name ArchLVM
LV UUID XRYBrz-LojR-k6SD-XIxV-wHnY-f3VG-giKL6V
LV Write Access read/write
LV Creation host, time archiso, 2014-05-16 14:43:06 +0200
LV Status available
# open 0
LV Size 8.00 GiB
Current LE 2048
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 254:0
--- Logical volume ---
LV Path /dev/ArchLVM/Root
LV Name Root
VG Name ArchLVM
LV UUID lpjDl4-Jqzu-ZWkq-Uphc-IaOo-6Rzd-cIh5yv
LV Write Access read/write
LV Creation host, time archiso, 2014-05-16 14:43:27 +0200
LV Status available
# open 1
LV Size 224.69 GiB
Current LE 57520
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 254:1
/etc/fstab
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/mapper/ArchLVM-Root
UUID=2db82d1a-47a4-4e30-a819-143e8fb75199 / ext4 rw,relatime,data=ordered 0 1
#/dev/mapper/ArchLVM-Root / ext4 rw,relatime,data=ordered 0 1
# /dev/sda1
UUID=72691888-a781-4cdd-a98e-2613d87925d0 /boot ext2 rw,relatime 0 2
/etc/mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect block filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev block filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev block mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev block lvm2 filesystems"
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr, fsck and shutdown hooks.
HOOKS="base udev autodetect modconf block lvm2 filesystems keyboard fsck"
# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
/boot/grub/grub.cfg
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod lvm
insmod ext2
set root='lvmid/SoB3M1-v1fD-1abI-PNJ3-6IOn-FfdI-0RoLK5/lpjDl4-Jqzu-ZWkq-Uphc-IaOo-6Rzd-cIh5yv'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='lvmid/SoB3M1-v1fD-1abI-PNJ3-6IOn-FfdI-0RoLK5/lpjDl4-Jqzu-ZWkq-Uphc-IaOo-6Rzd-cIh5yv' 2db82d1a-47a4-4e30-a819-143e8fb75199
else
search --no-floppy --fs-uuid --set=root 2db82d1a-47a4-4e30-a819-143e8fb75199
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_input console
terminal_output gfxterm
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-2db82d1a-47a4-4e30-a819-143e8fb75199' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 72691888-a781-4cdd-a98e-2613d87925d0
else
search --no-floppy --fs-uuid --set=root 72691888-a781-4cdd-a98e-2613d87925d0
fi
echo 'Loading Linux linux ...'
linux /vmlinuz-linux root=UUID=2db82d1a-47a4-4e30-a819-143e8fb75199 rw quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux.img
submenu 'Advanced options for Arch Linux' $menuentry_id_option 'gnulinux-advanced-2db82d1a-47a4-4e30-a819-143e8fb75199' {
menuentry 'Arch Linux, with Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-2db82d1a-47a4-4e30-a819-143e8fb75199' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 72691888-a781-4cdd-a98e-2613d87925d0
else
search --no-floppy --fs-uuid --set=root 72691888-a781-4cdd-a98e-2613d87925d0
fi
echo 'Loading Linux linux ...'
linux /vmlinuz-linux root=UUID=2db82d1a-47a4-4e30-a819-143e8fb75199 rw quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux.img
menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-2db82d1a-47a4-4e30-a819-143e8fb75199' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 72691888-a781-4cdd-a98e-2613d87925d0
else
search --no-floppy --fs-uuid --set=root 72691888-a781-4cdd-a98e-2613d87925d0
fi
echo 'Loading Linux linux ...'
linux /vmlinuz-linux root=UUID=2db82d1a-47a4-4e30-a819-143e8fb75199 rw quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/60_memtest86+ ###
### END /etc/grub.d/60_memtest86+ ###
Last edited by Kirodema (2014-07-16 07:31:34)use_lvmetad = 0
lvm2-lvmetad is not enabled or running on my system. Shall I activate it?
# This is an example configuration file for the LVM2 system.
# It contains the default settings that would be used if there was no
# /etc/lvm/lvm.conf file.
# Refer to 'man lvm.conf' for further information including the file layout.
# To put this file in a different directory and override /etc/lvm set
# the environment variable LVM_SYSTEM_DIR before running the tools.
# N.B. Take care that each setting only appears once if uncommenting
# example settings in this file.
# This section allows you to set the way the configuration settings are handled.
config {
# If enabled, any LVM2 configuration mismatch is reported.
# This implies checking that the configuration key is understood
# by LVM2 and that the value of the key is of a proper type.
# If disabled, any configuration mismatch is ignored and default
# value is used instead without any warning (a message about the
# configuration key not being found is issued in verbose mode only).
checks = 1
# If enabled, any configuration mismatch aborts the LVM2 process.
abort_on_errors = 0
# Directory where LVM looks for configuration profiles.
profile_dir = "/etc/lvm/profile"
# This section allows you to configure which block devices should
# be used by the LVM system.
devices {
# Where do you want your volume groups to appear ?
dir = "/dev"
# An array of directories that contain the device nodes you wish
# to use with LVM2.
scan = [ "/dev" ]
# If set, the cache of block device nodes with all associated symlinks
# will be constructed out of the existing udev database content.
# This avoids using and opening any inapplicable non-block devices or
# subdirectories found in the device directory. This setting is applied
# to udev-managed device directory only, other directories will be scanned
# fully. LVM2 needs to be compiled with udev support for this setting to
# take effect. N.B. Any device node or symlink not managed by udev in
# udev directory will be ignored with this setting on.
obtain_device_list_from_udev = 1
# If several entries in the scanned directories correspond to the
# same block device and the tools need to display a name for device,
# all the pathnames are matched against each item in the following
# list of regular expressions in turn and the first match is used.
preferred_names = [ ]
# Try to avoid using undescriptive /dev/dm-N names, if present.
# preferred_names = [ "^/dev/mpath/", "^/dev/mapper/mpath", "^/dev/[hs]d" ]
# A filter that tells LVM2 to only use a restricted set of devices.
# The filter consists of an array of regular expressions. These
# expressions can be delimited by a character of your choice, and
# prefixed with either an 'a' (for accept) or 'r' (for reject).
# The first expression found to match a device name determines if
# the device will be accepted or rejected (ignored). Devices that
# don't match any patterns are accepted.
# Be careful if there there are symbolic links or multiple filesystem
# entries for the same device as each name is checked separately against
# the list of patterns. The effect is that if the first pattern in the
# list to match a name is an 'a' pattern for any of the names, the device
# is accepted; otherwise if the first pattern in the list to match a name
# is an 'r' pattern for any of the names it is rejected; otherwise it is
# accepted.
# Don't have more than one filter line active at once: only one gets used.
# Run vgscan after you change this parameter to ensure that
# the cache file gets regenerated (see below).
# If it doesn't do what you expect, check the output of 'vgscan -vvvv'.
# If lvmetad is used, then see "A note about device filtering while
# lvmetad is used" comment that is attached to global/use_lvmetad setting.
# By default we accept every block device:
filter = [ "a/.*/" ]
# Exclude the cdrom drive
# filter = [ "r|/dev/cdrom|" ]
# When testing I like to work with just loopback devices:
# filter = [ "a/loop/", "r/.*/" ]
# Or maybe all loops and ide drives except hdc:
# filter =[ "a|loop|", "r|/dev/hdc|", "a|/dev/ide|", "r|.*|" ]
# Use anchors if you want to be really specific
# filter = [ "a|^/dev/hda8$|", "r/.*/" ]
# Since "filter" is often overridden from command line, it is not suitable
# for system-wide device filtering (udev rules, lvmetad). To hide devices
# from LVM-specific udev processing and/or from lvmetad, you need to set
# global_filter. The syntax is the same as for normal "filter"
# above. Devices that fail the global_filter are not even opened by LVM.
# global_filter = []
# The results of the filtering are cached on disk to avoid
# rescanning dud devices (which can take a very long time).
# By default this cache is stored in the /etc/lvm/cache directory
# in a file called '.cache'.
# It is safe to delete the contents: the tools regenerate it.
# (The old setting 'cache' is still respected if neither of
# these new ones is present.)
# N.B. If obtain_device_list_from_udev is set to 1 the list of
# devices is instead obtained from udev and any existing .cache
# file is removed.
cache_dir = "/etc/lvm/cache"
cache_file_prefix = ""
# You can turn off writing this cache file by setting this to 0.
write_cache_state = 1
# Advanced settings.
# List of pairs of additional acceptable block device types found
# in /proc/devices with maximum (non-zero) number of partitions.
# types = [ "fd", 16 ]
# If sysfs is mounted (2.6 kernels) restrict device scanning to
# the block devices it believes are valid.
# 1 enables; 0 disables.
sysfs_scan = 1
# By default, LVM2 will ignore devices used as component paths
# of device-mapper multipath devices.
# 1 enables; 0 disables.
multipath_component_detection = 1
# By default, LVM2 will ignore devices used as components of
# software RAID (md) devices by looking for md superblocks.
# 1 enables; 0 disables.
md_component_detection = 1
# By default, if a PV is placed directly upon an md device, LVM2
# will align its data blocks with the md device's stripe-width.
# 1 enables; 0 disables.
md_chunk_alignment = 1
# Default alignment of the start of a data area in MB. If set to 0,
# a value of 64KB will be used. Set to 1 for 1MiB, 2 for 2MiB, etc.
# default_data_alignment = 1
# By default, the start of a PV's data area will be a multiple of
# the 'minimum_io_size' or 'optimal_io_size' exposed in sysfs.
# - minimum_io_size - the smallest request the device can perform
# w/o incurring a read-modify-write penalty (e.g. MD's chunk size)
# - optimal_io_size - the device's preferred unit of receiving I/O
# (e.g. MD's stripe width)
# minimum_io_size is used if optimal_io_size is undefined (0).
# If md_chunk_alignment is enabled, that detects the optimal_io_size.
# This setting takes precedence over md_chunk_alignment.
# 1 enables; 0 disables.
data_alignment_detection = 1
# Alignment (in KB) of start of data area when creating a new PV.
# md_chunk_alignment and data_alignment_detection are disabled if set.
# Set to 0 for the default alignment (see: data_alignment_default)
# or page size, if larger.
data_alignment = 0
# By default, the start of the PV's aligned data area will be shifted by
# the 'alignment_offset' exposed in sysfs. This offset is often 0 but
# may be non-zero; e.g.: certain 4KB sector drives that compensate for
# windows partitioning will have an alignment_offset of 3584 bytes
# (sector 7 is the lowest aligned logical block, the 4KB sectors start
# at LBA -1, and consequently sector 63 is aligned on a 4KB boundary).
# But note that pvcreate --dataalignmentoffset will skip this detection.
# 1 enables; 0 disables.
data_alignment_offset_detection = 1
# If, while scanning the system for PVs, LVM2 encounters a device-mapper
# device that has its I/O suspended, it waits for it to become accessible.
# Set this to 1 to skip such devices. This should only be needed
# in recovery situations.
ignore_suspended_devices = 0
# ignore_lvm_mirrors: Introduced in version 2.02.104
# This setting determines whether logical volumes of "mirror" segment
# type are scanned for LVM labels. This affects the ability of
# mirrors to be used as physical volumes. If 'ignore_lvm_mirrors'
# is set to '1', it becomes impossible to create volume groups on top
# of mirror logical volumes - i.e. to stack volume groups on mirrors.
# Allowing mirror logical volumes to be scanned (setting the value to '0')
# can potentially cause LVM processes and I/O to the mirror to become
# blocked. This is due to the way that the "mirror" segment type handles
# failures. In order for the hang to manifest itself, an LVM command must
# be run just after a failure and before the automatic LVM repair process
# takes place OR there must be failures in multiple mirrors in the same
# volume group at the same time with write failures occurring moments
# before a scan of the mirror's labels.
# Note that these scanning limitations do not apply to the LVM RAID
# types, like "raid1". The RAID segment types handle failures in a
# different way and are not subject to possible process or I/O blocking.
# It is encouraged that users set 'ignore_lvm_mirrors' to 1 if they
# are using the "mirror" segment type. Users that require volume group
# stacking on mirrored logical volumes should consider using the "raid1"
# segment type. The "raid1" segment type is not available for
# active/active clustered volume groups.
# Set to 1 to disallow stacking and thereby avoid a possible deadlock.
ignore_lvm_mirrors = 1
# During each LVM operation errors received from each device are counted.
# If the counter of a particular device exceeds the limit set here, no
# further I/O is sent to that device for the remainder of the respective
# operation. Setting the parameter to 0 disables the counters altogether.
disable_after_error_count = 0
# Allow use of pvcreate --uuid without requiring --restorefile.
require_restorefile_with_uuid = 1
# Minimum size (in KB) of block devices which can be used as PVs.
# In a clustered environment all nodes must use the same value.
# Any value smaller than 512KB is ignored.
# Ignore devices smaller than 2MB such as floppy drives.
pv_min_size = 2048
# The original built-in setting was 512 up to and including version 2.02.84.
# pv_min_size = 512
# Issue discards to a logical volumes's underlying physical volume(s) when
# the logical volume is no longer using the physical volumes' space (e.g.
# lvremove, lvreduce, etc). Discards inform the storage that a region is
# no longer in use. Storage that supports discards advertise the protocol
# specific way discards should be issued by the kernel (TRIM, UNMAP, or
# WRITE SAME with UNMAP bit set). Not all storage will support or benefit
# from discards but SSDs and thinly provisioned LUNs generally do. If set
# to 1, discards will only be issued if both the storage and kernel provide
# support.
# 1 enables; 0 disables.
issue_discards = 0
# This section allows you to configure the way in which LVM selects
# free space for its Logical Volumes.
allocation {
# When searching for free space to extend an LV, the "cling"
# allocation policy will choose space on the same PVs as the last
# segment of the existing LV. If there is insufficient space and a
# list of tags is defined here, it will check whether any of them are
# attached to the PVs concerned and then seek to match those PV tags
# between existing extents and new extents.
# Use the special tag "@*" as a wildcard to match any PV tag.
# Example: LVs are mirrored between two sites within a single VG.
# PVs are tagged with either @site1 or @site2 to indicate where
# they are situated.
# cling_tag_list = [ "@site1", "@site2" ]
# cling_tag_list = [ "@*" ]
# Changes made in version 2.02.85 extended the reach of the 'cling'
# policies to detect more situations where data can be grouped
# onto the same disks. Set this to 0 to revert to the previous
# algorithm.
maximise_cling = 1
# Whether to use blkid library instead of native LVM2 code to detect
# any existing signatures while creating new Physical Volumes and
# Logical Volumes. LVM2 needs to be compiled with blkid wiping support
# for this setting to take effect.
# LVM2 native detection code is currently able to recognize these signatures:
# - MD device signature
# - swap signature
# - LUKS signature
# To see the list of signatures recognized by blkid, check the output
# of 'blkid -k' command. The blkid can recognize more signatures than
# LVM2 native detection code, but due to this higher number of signatures
# to be recognized, it can take more time to complete the signature scan.
use_blkid_wiping = 1
# Set to 1 to wipe any signatures found on newly-created Logical Volumes
# automatically in addition to zeroing of the first KB on the LV
# (controlled by the -Z/--zero y option).
# The command line option -W/--wipesignatures takes precedence over this
# setting.
# The default is to wipe signatures when zeroing.
wipe_signatures_when_zeroing_new_lvs = 1
# Set to 1 to guarantee that mirror logs will always be placed on
# different PVs from the mirror images. This was the default
# until version 2.02.85.
mirror_logs_require_separate_pvs = 0
# Set to 1 to guarantee that cache_pool metadata will always be
# placed on different PVs from the cache_pool data.
cache_pool_metadata_require_separate_pvs = 0
# Specify the minimal chunk size (in kiB) for cache pool volumes.
# Using a chunk_size that is too large can result in wasteful use of
# the cache, where small reads and writes can cause large sections of
# an LV to be mapped into the cache. However, choosing a chunk_size
# that is too small can result in more overhead trying to manage the
# numerous chunks that become mapped into the cache. The former is
# more of a problem than the latter in most cases, so we default to
# a value that is on the smaller end of the spectrum. Supported values
# range from 32(kiB) to 1048576 in multiples of 32.
# cache_pool_chunk_size = 64
# Set to 1 to guarantee that thin pool metadata will always
# be placed on different PVs from the pool data.
thin_pool_metadata_require_separate_pvs = 0
# Specify chunk size calculation policy for thin pool volumes.
# Possible options are:
# "generic" - if thin_pool_chunk_size is defined, use it.
# Otherwise, calculate the chunk size based on
# estimation and device hints exposed in sysfs:
# the minimum_io_size. The chunk size is always
# at least 64KiB.
# "performance" - if thin_pool_chunk_size is defined, use it.
# Otherwise, calculate the chunk size for
# performance based on device hints exposed in
# sysfs: the optimal_io_size. The chunk size is
# always at least 512KiB.
# thin_pool_chunk_size_policy = "generic"
# Specify the minimal chunk size (in KB) for thin pool volumes.
# Use of the larger chunk size may improve performance for plain
# thin volumes, however using them for snapshot volumes is less efficient,
# as it consumes more space and takes extra time for copying.
# When unset, lvm tries to estimate chunk size starting from 64KB
# Supported values are in range from 64 to 1048576.
# thin_pool_chunk_size = 64
# Specify discards behaviour of the thin pool volume.
# Select one of "ignore", "nopassdown", "passdown"
# thin_pool_discards = "passdown"
# Set to 0, to disable zeroing of thin pool data chunks before their
# first use.
# N.B. zeroing larger thin pool chunk size degrades performance.
# thin_pool_zero = 1
# This section that allows you to configure the nature of the
# information that LVM2 reports.
log {
# Controls the messages sent to stdout or stderr.
# There are three levels of verbosity, 3 being the most verbose.
verbose = 0
# Set to 1 to suppress all non-essential messages from stdout.
# This has the same effect as -qq.
# When this is set, the following commands still produce output:
# dumpconfig, lvdisplay, lvmdiskscan, lvs, pvck, pvdisplay,
# pvs, version, vgcfgrestore -l, vgdisplay, vgs.
# Non-essential messages are shifted from log level 4 to log level 5
# for syslog and lvm2_log_fn purposes.
# Any 'yes' or 'no' questions not overridden by other arguments
# are suppressed and default to 'no'.
silent = 0
# Should we send log messages through syslog?
# 1 is yes; 0 is no.
syslog = 1
# Should we log error and debug messages to a file?
# By default there is no log file.
#file = "/var/log/lvm2.log"
# Should we overwrite the log file each time the program is run?
# By default we append.
overwrite = 0
# What level of log messages should we send to the log file and/or syslog?
# There are 6 syslog-like log levels currently in use - 2 to 7 inclusive.
# 7 is the most verbose (LOG_DEBUG).
level = 0
# Format of output messages
# Whether or not (1 or 0) to indent messages according to their severity
indent = 1
# Whether or not (1 or 0) to display the command name on each line output
command_names = 0
# A prefix to use before the message text (but after the command name,
# if selected). Default is two spaces, so you can see/grep the severity
# of each message.
prefix = " "
# To make the messages look similar to the original LVM tools use:
# indent = 0
# command_names = 1
# prefix = " -- "
# Set this if you want log messages during activation.
# Don't use this in low memory situations (can deadlock).
# activation = 0
# Some debugging messages are assigned to a class and only appear
# in debug output if the class is listed here.
# Classes currently available:
# memory, devices, activation, allocation, lvmetad, metadata, cache,
# locking
# Use "all" to see everything.
debug_classes = [ "memory", "devices", "activation", "allocation",
"lvmetad", "metadata", "cache", "locking" ]
# Configuration of metadata backups and archiving. In LVM2 when we
# talk about a 'backup' we mean making a copy of the metadata for the
# *current* system. The 'archive' contains old metadata configurations.
# Backups are stored in a human readable text format.
backup {
# Should we maintain a backup of the current metadata configuration ?
# Use 1 for Yes; 0 for No.
# Think very hard before turning this off!
backup = 1
# Where shall we keep it ?
# Remember to back up this directory regularly!
backup_dir = "/etc/lvm/backup"
# Should we maintain an archive of old metadata configurations.
# Use 1 for Yes; 0 for No.
# On by default. Think very hard before turning this off.
archive = 1
# Where should archived files go ?
# Remember to back up this directory regularly!
archive_dir = "/etc/lvm/archive"
# What is the minimum number of archive files you wish to keep ?
retain_min = 10
# What is the minimum time you wish to keep an archive file for ?
retain_days = 30
# Settings for the running LVM2 in shell (readline) mode.
shell {
# Number of lines of history to store in ~/.lvm_history
history_size = 100
# Miscellaneous global LVM2 settings
global {
# The file creation mask for any files and directories created.
# Interpreted as octal if the first digit is zero.
umask = 077
# Allow other users to read the files
#umask = 022
# Enabling test mode means that no changes to the on disk metadata
# will be made. Equivalent to having the -t option on every
# command. Defaults to off.
test = 0
# Default value for --units argument
units = "h"
# Since version 2.02.54, the tools distinguish between powers of
# 1024 bytes (e.g. KiB, MiB, GiB) and powers of 1000 bytes (e.g.
# KB, MB, GB).
# If you have scripts that depend on the old behaviour, set this to 0
# temporarily until you update them.
si_unit_consistency = 1
# Whether or not to display unit suffix for sizes. This setting has
# no effect if the units are in human-readable form (global/units="h")
# in which case the suffix is always displayed.
suffix = 1
# Whether or not to communicate with the kernel device-mapper.
# Set to 0 if you want to use the tools to manipulate LVM metadata
# without activating any logical volumes.
# If the device-mapper kernel driver is not present in your kernel
# setting this to 0 should suppress the error messages.
activation = 1
# If we can't communicate with device-mapper, should we try running
# the LVM1 tools?
# This option only applies to 2.4 kernels and is provided to help you
# switch between device-mapper kernels and LVM1 kernels.
# The LVM1 tools need to be installed with .lvm1 suffices
# e.g. vgscan.lvm1 and they will stop working after you start using
# the new lvm2 on-disk metadata format.
# The default value is set when the tools are built.
# fallback_to_lvm1 = 0
# The default metadata format that commands should use - "lvm1" or "lvm2".
# The command line override is -M1 or -M2.
# Defaults to "lvm2".
# format = "lvm2"
# Location of proc filesystem
proc = "/proc"
# Type of locking to use. Defaults to local file-based locking (1).
# Turn locking off by setting to 0 (dangerous: risks metadata corruption
# if LVM2 commands get run concurrently).
# Type 2 uses the external shared library locking_library.
# Type 3 uses built-in clustered locking.
# Type 4 uses read-only locking which forbids any operations that might
# change metadata.
# N.B. Don't use lvmetad with locking type 3 as lvmetad is not yet
# supported in clustered environment. If use_lvmetad=1 and locking_type=3
# is set at the same time, LVM always issues a warning message about this
# and then it automatically disables lvmetad use.
locking_type = 1
# Set to 0 to fail when a lock request cannot be satisfied immediately.
wait_for_locks = 1
# If using external locking (type 2) and initialisation fails,
# with this set to 1 an attempt will be made to use the built-in
# clustered locking.
# If you are using a customised locking_library you should set this to 0.
fallback_to_clustered_locking = 1
# If an attempt to initialise type 2 or type 3 locking failed, perhaps
# because cluster components such as clvmd are not running, with this set
# to 1 an attempt will be made to use local file-based locking (type 1).
# If this succeeds, only commands against local volume groups will proceed.
# Volume Groups marked as clustered will be ignored.
fallback_to_local_locking = 1
# Local non-LV directory that holds file-based locks while commands are
# in progress. A directory like /tmp that may get wiped on reboot is OK.
locking_dir = "/run/lock/lvm"
# Whenever there are competing read-only and read-write access requests for
# a volume group's metadata, instead of always granting the read-only
# requests immediately, delay them to allow the read-write requests to be
# serviced. Without this setting, write access may be stalled by a high
# volume of read-only requests.
# NB. This option only affects locking_type = 1 viz. local file-based
# locking.
prioritise_write_locks = 1
# Other entries can go here to allow you to load shared libraries
# e.g. if support for LVM1 metadata was compiled as a shared library use
# format_libraries = "liblvm2format1.so"
# Full pathnames can be given.
# Search this directory first for shared libraries.
# library_dir = "/lib"
# The external locking library to load if locking_type is set to 2.
# locking_library = "liblvm2clusterlock.so"
# Treat any internal errors as fatal errors, aborting the process that
# encountered the internal error. Please only enable for debugging.
abort_on_internal_errors = 0
# Check whether CRC is matching when parsed VG is used multiple times.
# This is useful to catch unexpected internal cached volume group
# structure modification. Please only enable for debugging.
detect_internal_vg_cache_corruption = 0
# If set to 1, no operations that change on-disk metadata will be permitted.
# Additionally, read-only commands that encounter metadata in need of repair
# will still be allowed to proceed exactly as if the repair had been
# performed (except for the unchanged vg_seqno).
# Inappropriate use could mess up your system, so seek advice first!
metadata_read_only = 0
# 'mirror_segtype_default' defines which segtype will be used when the
# shorthand '-m' option is used for mirroring. The possible options are:
# "mirror" - The original RAID1 implementation provided by LVM2/DM. It is
# characterized by a flexible log solution (core, disk, mirrored)
# and by the necessity to block I/O while reconfiguring in the
# event of a failure.
# There is an inherent race in the dmeventd failure handling
# logic with snapshots of devices using this type of RAID1 that
# in the worst case could cause a deadlock.
# Ref: https://bugzilla.redhat.com/show_bug.cgi?id=817130#c10
# "raid1" - This implementation leverages MD's RAID1 personality through
# device-mapper. It is characterized by a lack of log options.
# (A log is always allocated for every device and they are placed
# on the same device as the image - no separate devices are
# required.) This mirror implementation does not require I/O
# to be blocked in the kernel in the event of a failure.
# This mirror implementation is not cluster-aware and cannot be
# used in a shared (active/active) fashion in a cluster.
# Specify the '--type <mirror|raid1>' option to override this default
# setting.
mirror_segtype_default = "raid1"
# 'raid10_segtype_default' determines the segment types used by default
# when the '--stripes/-i' and '--mirrors/-m' arguments are both specified
# during the creation of a logical volume.
# Possible settings include:
# "raid10" - This implementation leverages MD's RAID10 personality through
# device-mapper.
# "mirror" - LVM will layer the 'mirror' and 'stripe' segment types. It
# will do this by creating a mirror on top of striped sub-LVs;
# effectively creating a RAID 0+1 array. This is suboptimal
# in terms of providing redundancy and performance. Changing to
# this setting is not advised.
# Specify the '--type <raid10|mirror>' option to override this default
# setting.
raid10_segtype_default = "raid10"
# The default format for displaying LV names in lvdisplay was changed
# in version 2.02.89 to show the LV name and path separately.
# Previously this was always shown as /dev/vgname/lvname even when that
# was never a valid path in the /dev filesystem.
# Set to 1 to reinstate the previous format.
# lvdisplay_shows_full_device_path = 0
# Whether to use (trust) a running instance of lvmetad. If this is set to
# 0, all commands fall back to the usual scanning mechanisms. When set to 1
# *and* when lvmetad is running (automatically instantiated by making use of
# systemd's socket-based service activation or run as an initscripts service
# or run manually), the volume group metadata and PV state flags are obtained
# from the lvmetad instance and no scanning is done by the individual
# commands. In a setup with lvmetad, lvmetad udev rules *must* be set up for
# LVM to work correctly. Without proper udev rules, all changes in block
# device configuration will be *ignored* until a manual 'pvscan --cache'
# is performed. These rules are installed by default.
# If lvmetad has been running while use_lvmetad was 0, it MUST be stopped
# before changing use_lvmetad to 1 and started again afterwards.
# If using lvmetad, the volume activation is also switched to automatic
# event-based mode. In this mode, the volumes are activated based on
# incoming udev events that automatically inform lvmetad about new PVs
# that appear in the system. Once the VG is complete (all the PVs are
# present), it is auto-activated. The activation/auto_activation_volume_list
# setting controls which volumes are auto-activated (all by default).
# A note about device filtering while lvmetad is used:
# When lvmetad is updated (either automatically based on udev events
# or directly by pvscan --cache <device> call), the devices/filter
# is ignored and all devices are scanned by default. The lvmetad always
# keeps unfiltered information which is then provided to LVM commands
# and then each LVM command does the filtering based on devices/filter
# setting itself.
# To prevent scanning devices completely, even when using lvmetad,
# the devices/global_filter must be used.
# N.B. Don't use lvmetad with locking type 3 as lvmetad is not yet
# supported in clustered environment. If use_lvmetad=1 and locking_type=3
# is set at the same time, LVM always issues a warning message about this
# and then it automatically disables lvmetad use.
use_lvmetad = 0
# Full path of the utility called to check that a thin metadata device
# is in a state that allows it to be used.
# Each time a thin pool needs to be activated or after it is deactivated
# this utility is executed. The activation will only proceed if the utility
# has an exit status of 0.
# Set to "" to skip this check. (Not recommended.)
# The thin tools are available as part of the device-mapper-persistent-data
# package from https://github.com/jthornber/thin-provisioning-tools.
# thin_check_executable = "/usr/bin/thin_check"
# Array of string options passed with thin_check command. By default,
# option "-q" is for quiet output.
# With thin_check version 2.1 or newer you can add "--ignore-non-fatal-errors"
# to let it pass through ignorable errors and fix them later.
# thin_check_options = [ "-q" ]
# Full path of the utility called to repair a thin metadata device
# is in a state that allows it to be used.
# Each time a thin pool needs repair this utility is executed.
# See thin_check_executable how to obtain binaries.
# thin_repair_executable = "/usr/bin/thin_repair"
# Array of extra string options passed with thin_repair command.
# thin_repair_options = [ "" ]
# Full path of the utility called to dump thin metadata content.
# See thin_check_executable how to obtain binaries.
# thin_dump_executable = "/usr/bin/thin_dump"
# If set, given features are not used by thin driver.
# This can be helpful not just for testing, but i.e. allows to avoid
# using problematic implementation of some thin feature.
# Features:
# block_size
# discards
# discards_non_power_2
# external_origin
# metadata_resize
# external_origin_extend
# thin_disabled_features = [ "discards", "block_size" ]
activation {
# Set to 1 to perform internal checks on the operations issued to
# libdevmapper. Useful for debugging problems with activation.
# Some of the checks may be expensive, so it's best to use this
# only when there seems to be a problem.
checks = 0
# Set to 0 to disable udev synchronisation (if compiled into the binaries).
# Processes will not wait for notification from udev.
# They will continue irrespective of any possible udev processing
# in the background. You should only use this if udev is not running
# or has rules that ignore the devices LVM2 creates.
# The command line argument --nodevsync takes precedence over this setting.
# If set to 1 when udev is not running, and there are LVM2 processes
# waiting for udev, run 'dmsetup udevcomplete_all' manually to wake them up.
udev_sync = 1
# Set to 0 to disable the udev rules installed by LVM2 (if built with
# --enable-udev_rules). LVM2 will then manage the /dev nodes and symlinks
# for active logical volumes directly itself.
# N.B. Manual intervention may be required if this setting is changed
# while any logical volumes are active.
udev_rules = 1
# Set to 1 for LVM2 to verify operations performed by udev. This turns on
# additional checks (and if necessary, repairs) on entries in the device
# directory after udev has completed processing its events.
# Useful for diagnosing problems with LVM2/udev interactions.
verify_udev_operations = 0
# If set to 1 and if deactivation of an LV fails, perhaps because
# a process run from a quick udev rule temporarily opened the device,
# retry the operation for a few seconds before failing.
retry_deactivation = 1
# How to fill in missing stripes if activating an incomplete volume.
# Using "error" will make inaccessible parts of the device return
# I/O errors on access. You can instead use a device path, in which
# case, that device will be used to in place of missing stripes.
# But note that using anything other than "error" with mirrored
# or snapshotted volumes is likely to result in data corruption.
missing_stripe_filler = "error"
# The linear target is an optimised version of the striped target
# that only handles a single stripe. Set this to 0 to disable this
# optimisation and always use the striped target.
use_linear_target = 1
# How much stack (in KB) to reserve for use while devices suspended
# Prior to version 2.02.89 this used to be set to 256KB
reserved_stack = 64
# How much memory (in KB) to reserve for use while devices suspended
reserved_memory = 8192
# Nice value used while devices suspended
process_priority = -18
# If volume_list is defined, each LV is only activated if there is a
# match against the list.
# "vgname" and "vgname/lvname" are matched exactly.
# "@tag" matches any tag set in the LV or VG.
# "@*" matches if any tag defined on the host is also set in the LV or VG
# If any host tags exist but volume_list is not defined, a default
# single-entry list containing "@*" is assumed.
# volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
# If auto_activation_volume_list is defined, each LV that is to be
# activated with the autoactivation option (--activate ay/-a ay) is
# first checked against the list. There are two scenarios in which
# the autoactivation option is used:
# - automatic activation of volumes based on incoming PVs. If all the
# PVs making up a VG are present in the system, the autoactivation
# is triggered. This requires lvmetad (global/use_lvmetad=1) and udev
# to be running. In this case, "pvscan --cache -aay" is called
# automatically without any user intervention while processing
# udev events. Please, make sure you define auto_activation_volume_list
# properly so only the volumes you want and expect are autoactivated.
# - direct activation on command line with the autoactivation option.
# In this case, the user calls "vgchange --activate ay/-a ay" or
# "lvchange --activate ay/-a ay" directly.
# By default, the auto_activation_volume_list is not defined and all
# volumes will be activated either automatically or by using --activate ay/-a ay.
# N.B. The "activation/volume_list" is still honoured in all cases so even
# if the VG/LV passes the auto_activation_volume_list, it still needs to
# pass the volume_list for it to be activated in the end.
# If auto_activation_volume_list is defined but empty, no volumes will be
# activated automatically and --activate ay/-a ay will do nothing.
# auto_activation_volume_list = []
# If auto_activation_volume_list is defined and it's not empty, only matching
# volumes will be activated either automatically or by using --activate ay/-a ay.
# "vgname" and "vgname/lvname" are matched exactly.
# "@tag" matches any tag set in the LV or VG.
# "@*" matches if any tag defined on the host is also set in the LV or VG
# auto_activation_volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
# If read_only_volume_list is defined, each LV that is to be activated
# is checked against the list, and if it matches, it as activated
# in read-only mode. (This overrides '--permission rw' stored in the
# metadata.)
# "vgname" and "vgname/lvname" are matched exactly.
# "@tag" matches any tag set in the LV or VG.
# "@*" matches if any tag defined on the host is also set in the LV or VG
# read_only_volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
# Each LV can have an 'activation skip' flag stored persistently against it.
# During activation, this flag is used to decide whether such an LV is skipped.
# The 'activation skip' flag can be set during LV creation and by default it
# is automatically set for thin snapshot LVs. The 'auto_set_activation_skip'
# enables or disables this automatic setting of the flag while LVs are created.
# auto_set_activation_skip = 1
# For RAID or 'mirror' segment types, 'raid_region_size' is the
# size (in KiB) of each:
# - synchronization operation when initializing
# - each copy operation when performing a 'pvmove' (using 'mirror' segtype)
# This setting has replaced 'mirror_region_size' since version 2.02.99
raid_region_size = 512
# Setting to use when there is no readahead value stored in the metadata.
# "none" - Disable readahead.
# "auto" - Use default value chosen by kernel.
readahead = "auto"
# 'raid_fault_policy' defines how a device failure in a RAID logical
# volume is handled. This includes logical volumes that have the following
# segment types: raid1, raid4, raid5*, and raid6*.
# In the event of a failure, the following policies will determine what
# actions are performed during the automated response to failures (when
# dmeventd is monitoring the RAID logical volume) and when 'lvconvert' is
# called manually with the options '--repair' and '--use-policies'.
# "warn" - Use the system log to warn the user that a device in the RAID
# logical volume has failed. It is left to the user to run
# 'lvconvert --repair' manually to remove or replace the failed
# device. As long as the number of failed devices does not
# exceed the redundancy of the logical volume (1 device for
# raid4/5, 2 for raid6, etc) the logical volume will remain
# usable.
# "allocate" - Attempt to use any extra physical volumes in the volume
# group as spares and replace faulty devices.
raid_fault_policy = "warn"
# 'mirror_image_fault_policy' and 'mirror_log_fault_policy' define
# how a device failure affecting a mirror (of "mirror" segment type) is
# handled. A mirror is composed of mirror images (copies) and a log.
# A disk log ensures that a mirror does not need to be re-synced
# (all copies made the same) every time a machine reboots or crashes.
# In the event of a failure, the specified policy will be used to determine
# what happens. This applies to automatic repairs (when the mirror is being
# monitored by dmeventd) and to manual lvconvert --repair when
# --use-policies is given.
# "remove" - Simply remove the faulty device and run without it. If
# the log device fails, the mirror would convert to using
# an in-memory log. This means the mirror will not
# remember its sync status across crashes/reboots and
# the entire mirror will be re-synced. If a
# mirror image fails, the mirror will convert to a
# non-mirrored device if there is only one remaining good
# copy.
# "allocate" - Remove the faulty device and try to allocate space on
# a new device to be a replacement for the failed device.
# Using this policy for the log is fast and maintains the
# ability to remember sync state through crashes/reboots.
# Using this policy for a mirror device is slow, as it
# requires the mirror to resynchronize the devices, but it
# will preserve the mirror characteristic of the device.
# This policy acts like "remove" if no suitable device and
# space can be allocated for the replacement.
# "allocate_anywhere" - Not yet implemented. Useful to place the log device
# temporarily on same physical volume as one of the mirror
# images. This policy is not recommended for mirror devices
# since it would break the redundant nature of the mirror. This
# policy acts like "remove" if no suitable device and space can
# be allocated for the replacement.
mirror_log_fault_policy = "allocate"
mirror_image_fault_policy = "remove"
# 'snapshot_autoextend_threshold' and 'snapshot_autoextend_percent' define
# how to handle automatic snapshot extension. The former defines when the
# snapshot should be extended: when its space usage exceeds this many
# percent. The latter defines how much extra space should be allocated for
# the snapshot, in percent of its current size.
# For example, if you set snapshot_autoextend_threshold to 70 and
# snapshot_autoextend_percent to 20, whenever a snapshot exceeds 70% usage,
# it will be extended by another 20%. For a 1G snapshot, using up 700M will
# trigger a resize to 1.2G. When the usage exceeds 840M, the snapshot will
# be extended to 1.44G, and so on.
# Setting snapshot_autoextend_threshold to 100 disables automatic
# extensions. The minimum value is 50 (A setting below 50 will be treated
# as 50).
snapshot_autoextend_threshold = 100
snapshot_autoextend_percent = 20
# 'thin_pool_autoextend_threshold' and 'thin_pool_autoextend_percent' define
# how to handle automatic pool extension. The former defines when the
# pool should be extended: when its space usage exceeds this many
# percent. The latter defines how much extra space should be allocated for
# the pool, in percent of its current size.
# For example, if you set thin_pool_autoextend_threshold to 70 and
# thin_pool_autoextend_percent to 20, whenever a pool exceeds 70% usage,
# it will be extended by another 20%. For a 1G pool, using up 700M will
# trigger a resize to 1.2G. When the usage exceeds 840M, the pool will
# be extended to 1.44G, and so on.
# Setting thin_pool_autoextend_threshold to 100 disables automatic
# extensions. The minimum value is 50 (A setting below 50 will be treated
# as 50).
thin_pool_autoextend_threshold = 100
thin_pool_autoextend_percent = 20
# While activating devices, I/O to devices being (re)configured is
# suspended, and as a precaution against deadlocks, LVM2 needs to pin
# any memory it is using so it is not paged out. Groups of pages that
# are known not to be accessed during activation need not be pinned
# into memory. Each string listed in this setting is compared against
# each line in /proc/self/maps, and the pages corresponding to any
# lines that match are not pinned. On some systems locale-archive was
# found to make up over 80% of the memory used by the process.
# mlock_filter = [ "locale/locale-archive", "gconv/gconv-modules.cache" ]
# Set to 1 to revert to the default behaviour prior to version 2.02.62
# which used mlockall() to pin the whole process's memory while activating
# devices.
use_mlockall = 0
# Monitoring is enabled by default when activating logical volumes.
# Set to 0 to disable monitoring or use the --ignoremonitoring option.
monitoring = 1
# When pvmove or lvconvert must wait for the kernel to finish
# synchronising or merging data, they check and report progress
# at intervals of this number of seconds. The default is 15 seconds.
# If this is set to 0 and there is only one thing to wait for, there
# are no progress reports, but the process is awoken immediately the
# operation is complete.
polling_interval = 15
# Report settings.
# report {
# Align columns on report output.
# aligned=1
# When buffered reporting is used, the report's content is appended
# incrementally to include each object being reported until the report
# is flushed to output which normally happens at the end of command
# execution. Otherwise, if buffering is not used, each object is
# reported as soon as its processing is finished.
# buffered=1
# Show headings for columns on report.
# headings=1
# A separator to use on report after each field.
# separator=" "
# Use a field name prefix for each field reported.
# prefixes=0
# Quote field values when using field name prefixes.
# quoted=1
# Output each column as a row. If set, this also implies report/prefixes=1.
# colums_as_rows=0
# Comma separated list of columns to sort by when reporting 'lvm devtypes' command.
# See 'lvm devtypes -o help' for the list of possible fields.
# devtypes_sort="devtype_name"
# Comma separated list of columns to report for 'lvm devtypes' command.
# See 'lvm devtypes -o help' for the list of possible fields.
# devtypes_cols="devtype_name,devtype_max_partitions,devtype_description"
# Comma separated list of columns to report for 'lvm devtypes' command in verbose mode.
# See 'lvm devtypes -o help' for the list of possible fields.
# devtypes_cols_verbose="devtype_name,devtype_max_partitions,devtype_description"
# Comma separated list of columns to sort by when reporting 'lvs' command.
# See 'lvs -o help' for the list of possible fields.
# lvs_sort="vg_name,lv_name"
# Comma separated list of columns to report for 'lvs' command.
# See 'lvs -o help' for the list of possible fields.
# lvs_cols="lv_name,vg_name,lv_attr,lv_size,pool_lv,origin,data_percent,move_pv,mirror_log,copy_percent,convert_lv"
# Comma separated list of columns to report for 'lvs' command in verbose mode.
# See 'lvs -o help' for the list of possible fields.
# lvs_cols_verbose="lv_name,vg_name,seg_count,lv_attr,lv_size,lv_major,lv_minor,lv_kernel_major,lv_kernel_minor,pool_lv,origin,data_percent,metadata_percent,move_pv,copy_percent,mirror_log,convert
# Comma separated list of columns to sort by when reporting 'vgs' command.
# See 'vgs -o help' for the list of possible fields.
# vgs_sort="vg_name"
# Comma separated list of columns to report for 'vgs' command.
# See 'vgs -o help' for the list of possible fields.
# vgs_cols="vg_name,pv_count,lv_count,snap_count,vg_attr,vg_size,vg_free"
# Comma separated list of columns to report for 'vgs' command in verbose mode.
# See 'vgs -o help' for the list of possible fields.
# vgs_cols_verbose="vg_name,vg_attr,vg_extent_size,pv_count,lv_count,snap_count,vg_size,vg_free,vg_uuid,vg_profile"
# Comma separated list of columns to sort by when reporting 'pvs' command.
# See 'pvs -o help' for the list of possible fields.
# pvs_sort="pv_name"
# Comma separated list of columns to report for 'pvs' command.
# See 'pvs -o help' for the list of possible fields.
# pvs_cols="pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free"
# Comma separated list of columns to report for 'pvs' command in verbose mode.
# See 'pvs -o help' for the list of possible fields.
# pvs_cols_verbose="pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,dev_size,pv_uuid"
# Comma separated list of columns to sort by when reporting 'lvs --segments' command.
# See 'lvs --segments -o help' for the list of possible fields.
# segs_sort="vg_name,lv_name,seg_start"
# Comma separated list of columns to report for 'lvs --segments' command.
# See 'lvs --segments -o help' for the list of possible fields.
# segs_cols="lv_name,vg_name,lv_attr,stripes,segtype,seg_size"
# Comma separated list of columns to report for 'lvs --segments' command in verbose mode.
# See 'lvs --segments -o help' for the list of possible fields.
# segs_cols_verbose="lv_name,vg_name,lv_attr,seg_start,seg_size,stripes,segtype,stripesize,chunksize"
# Comma separated list of columns to sort by when reporting 'pvs --segments' command.
# See 'pvs --segments -o help' for the list of possible fields.
# pvsegs_sort="pv_name,pvseg_start"
# Comma separated list of columns to sort by when reporting 'pvs --segments' command.
# See 'pvs --segments -o help' for the list of possible fields.
# pvsegs_cols="pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,pvseg_start,pvseg_size"
# Comma separated list of columns to sort by when reporting 'pvs --segments' command in verbose mode.
# See 'pvs --segments -o help' for the list of possible fields.
# pvsegs_cols_verbose="pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,pvseg_start,pvseg_size,lv_name,seg_start_pe,segtype,seg_pe_ranges"
# Advanced section #
# Metadata settings
# metadata {
# Default number of copies of metadata to hold on each PV. 0, 1 or 2.
# You might want to override it from the command line with 0
# when running pvcreate on new PVs which are to be added to large VGs.
# pvmetadatacopies = 1
# Default number of copies of metadata to maintain for each VG.
# If set to a non-zero value, LVM automatically chooses which of
# the available metadata areas to use to achieve the requested
# number of copies of the VG metadata. If you set a value larger
# than the the total number of metadata areas available then
# metadata is stored in them all.
# The default value of 0 ("unmanaged") disables this automatic
# management and allows you to control which metadata areas
# are used at the individual PV level using 'pvchange
# --metadataignore y/n'.
# vgmetadatacopies = 0
# Approximate default size of on-disk metadata areas in sectors.
# You should increase this if you have large volume groups or
# you want to retain a large on-disk history of your metadata changes.
# pvmetadatasize = 255
# List of directories holding live copies of text format metadata.
# These directories must not be on logical volumes!
# It's possible to use LVM2 with a couple of directories here,
# preferably on different (non-LV) filesystems, and with no other
# on-disk metadata (pvmetadatacopies = 0). Or this can be in
# addition to on-disk metadata areas.
# The feature was originally added to simplify testing and is not
# supported under low memory situations - the machine could lock up.
# Never edit any files in these directories by hand unless you
# you are absolutely sure you know what you are doing! Use
# the supplied toolset to make changes (e.g. vgcfgrestore).
# dirs = [ "/etc/lvm/metadata", "/mnt/disk2/lvm/metadata2" ]
# Event daemon
dmeventd {
# mirror_library is the library used when monitoring a mirror device.
# "libdevmapper-event-lvm2mirror.so" attempts to recover from
# failures. It removes failed devices from a volume group and
# reconfigures a mirror as necessary. If no mirror library is
# provided, mirrors are not monitored through dmeventd.
mirror_library = "libdevmapper-event-lvm2mirror.so"
# snapshot_library is the library used when monitoring a snapshot device.
# "libdevmapper-event-lvm2snapshot.so" monitors the filling of
# snapshots and emits a warning through syslog when the use of
# the snapshot exceeds 80%. The warning is repeated when 85%, 90% and
# 95% of the snapshot is filled.
snapshot_library = "libdevmapper-event-lvm2snapshot.so"
# thin_library is the library used when monitoring a thin device.
# "libdevmapper-event-lvm2thin.so" monitors the filling of
# pool and emits a warning through syslog when the use of
# the pool exceeds 80%. The warning is repeated when 85%, 90% and
# 95% of the pool is filled.
thin_library = "libdevmapper-event-lvm2thin.so"
# Full path of the dmeventd binary.
# executable = "/usr/sbin/dmeventd"
Maybe you are looking for
-
I have had my itunes account connected to my work email address for the past few years. I am now changing jobs and I am trying to change the email account connected to my itunes account. When I entered my personal email account it says there was al
-
How can I remove pictures from my iphone that were imported from another iphone
How can I delete photos from my current iphone that were imported from my previous iphone? They were also synced to mycomputer through itunes and not deletted at that time.
-
I have a Macbook pro 10.9.1 that will not communicate with my WD external hard drive. Whenever I connect the drive, this pops up: NTFS-3G could not mount /dev/disk1s1 at /Volumes/Elements because the following problem occurred: dyld: Library not load
-
Email Setup Application version 6.11.0324.1701 ERROR
Hi, I need some urgent help. I recently updated to OS6. Since the update, I have been trying to add an email account to my BB but whenever I try to open the setup app, it advises to update Email Setup Application 6.11.0324.1701. There is a major bug
-
Previewing DPS apps, on-device, for client approval prior to Publication via App Store
We're using Adobe's DPS to create simple tools and documentation for various health-care products. Our client is a global Ad Agency. Their client is a HealthCare company. They eventually want to publish these 'apps' via the Apple App Store, but, curr