Java Studio Creator Installation Problems in ubuntu linux (JRE not found)

Hi, im having some problem with the installation of this tool, i try to install it and i get a message saying that it can't found the JRE, i have also tried passing it by argument like this:
-is:javahome /usr/lib/j2se/jre/bin/
-is:javahome /usr/lib/j2se/jre/
but i get the same message, any suggestions??
Thanks in advance.

I was getting these same errors, and after a bunch of poking around
in the install script and debugging it, I finally figured out that the
"problem" was that I was typing 'sh <installer>' instead of chmoding the
installer +x and running it as a command.  I still don't understand why
it couldn't find the installed JVN (it's in /usr/bin/java, for heaven's
sake!), but when running it as a command it extracted the bundled jvm
and completed the install.
It did produce an error about being unable to find some stuff for the
bundled server, which I haven't tried to track down since I don't think
I need it. But I was able to install Creator and run it on Gentoo.
Now if I can just figure out why it does nothing when I click build
on an existing project, I'll be happy.

Similar Messages

  • Studio Creator installation problem with Fedora 5

    Hi,
    I tried installing JCreator in Fedora core 5, but I get the problem concerning the graphical installation. I tried installing Jcreator in silent mode using the command line options -is:log log.txt �silent and a sp file which sets the installDir and is.debug to 1 , however the installation does not complete, properly and it does not install the SunAppServer8 directory

    I can't recall what they are, but I know that there are some libs that you need to install to get the Creator installation to complete OK on Fedora 5.
    I think that I ended up using some libs from either Fedora 3 or 4 since there were no Fedora 5 versions available for the two (and again, I can't recall what they were) libs.
    I do know that it is possible though as I have Creator on Fedora 5 right now.

  • Oracle 10g XE installation problem on Ubuntu Linux, Oracle will not start

    Hi,
    After installing the pakages the error is when I call sqlplus and login as SYS :-
    oracleXE: error while loading shared libraries: libaio.so.1: cannot open shared object file: No such file or directory
    ERROR:
    ORA-12547: TNS:lost contact
    What I have done:-
    My system is 64 bit AMD.
    I installed .deb package on Ubuntu 9.04 server. I installed the following packages.
    1.     ibc6-i386
    2.     libaio_0.3.104-1_i386.deb
    3.     bc
    4.     oracle-xe-universal_10.2.0.1-1.1_i386.deb.
    The Oracle processes do not start after running /etc/init.d/oracle-xe start.
    I can tnsping from the local machine.
    dpkg -l |grep libaio gives the following:
    ii libaio1 0.3.107-3ubuntu1 Linux kernel AIO access library - shared lib

    I have been running XE on 9.04 (32bit on my laptop - 64bit on my workstation) and both works fine. I had no problem installing. I followed the directions in documents I found on Ubuntu forums and also google. The document I used to install on 64bit was from http://littlebrain.org
    I remember using
    dpkg -i --force-architecture libaio1_0.3.107-1ubuntu1_i386.deb
    dpkg -i --force-architecture libaio-dev_0.3.107-1ubuntu1_i386.deb
    dpkg -i --force-architecture libaio1-dbg_0.3.107-1ubuntu1_i386.deb
    dpkg -i --force-architecture oracle-xe_10.2.0.1-1.0_i386.deb
    and then I used the ./oracle-xe configure as root, the installation was ok - and I have even updated the APEX version to 3.2.1 on the XE installation running on my 64bit Ubuntu 9.04
    hope this proves useful
    R/ Zafer

  • JAI installation problem, javax/media/jai/util/ not found?

    Hi,
    I am trying to use the JAI instllation in executing a class. However, I keep getting the following message.
    Exception in thread "main" java.lang.NoClassDefFoundError: javax/media/jai/util/
    I have added some jars from the JAI instllation to my classpath. However, I still get this message.
    What jar file do I have to reference so I do not get this message?

    Even more strange, I deploy it under Unix, there is no problem. The previous one is deployed
    under Windowns XP. Anyone has same experience?

  • Problem with Java Studio Creator and Tomcat Server

    Hi Gays ,
    I have problem:
    here is the error from tomcat 5
    com.sun.rave.web.ui.appbase.ApplicationException: org.apache.jasper.JasperException: java.lang.RuntimeException: java.sql.SQLException: statement handle not executed: getMetaData
    com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.destroy(ViewHandlerImpl.java: 601)
    com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.ja va:316)
    com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87 )
    com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:221)
    com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
    javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
    com.sun.rave.web.ui.util.UploadFilter.doFilter(UploadFilter.java:194)
    if i develop application on my pc ( java studio creator with sun apps bundlled) is working perfectly,
    but i migrated application to Tomcat Server ( Database the same - Oracle 10 g)
    i can't show value ( as text) from datasoruce ( is in SessionBean1)
    (Category-.>Subcat->Items->details( url from items table[items.jsp])
    this is a working url "/faces/testpage.jsp?auk_id=31 "
    ( working with sun apps server , but not on Tomcat 5)
    below prerender method in details.java and fragment of details.jsp
    public void prerender() {
    try {
    String idauk = (getExternalContext().getRequestParameterMap().get("auk_id").toString());
    System.out.println("wartosc auk_id " + idauk);
    if (idauk != null) {
    getSessionBean1().getDetailsRowSet().setObject(1,idauk);
    getSessionBean1().getDetailsDataProvider().refresh();
    details.jsp
    xml version="1.0" encoding="UTF-8"?>
    <jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page" xmlns:ui="http://www.sun.com/web/ui">
    <jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
    <f:view>
    <ui:page binding="#{testpage.page1}" id="page1">
    <ui:html binding="#{testpage.html1}" id="html1">
    <ui:head binding="#{testpage.head1}" id="head1">
    <ui:link binding="#{testpage.link1}" id="link1" url="/resources/stylesheet.css"/>
    </ui:head>
    <ui:body binding="#{testpage.body1}" id="body1" style="-rave-layout: grid">
    <ui:form binding="#{testpage.form1}" id="form1">
    <ui:staticText binding="#{testpage.staticText1}" id="staticText1" style="position: absolute; left: 120px; top: 96px" text="#{SessionBean1.testDataProvider.value['Name']}"/>
    </ui:form>
    </ui:body>
    </ui:html>
    </ui:page>
    </f:view>
    </jsp:root>
    Help People ! Any Ideas I'm stuck, why is working with Sun Servet but not with Tomcat and only just thing ?
    Thanks in advance for helping me to resolve the night problem :)

    Hi I found solution, i puted on the page a table -component (with brand new automaticly created dataprovider) , then i set properties visible= false for table, and now I can bind statictext with database field and deploy on tomcat server .
    But i think it is not a elegant solution in page source i habe noused-code.
    Have Any another Ideas. HELP PEOPLE !!!!
    Mariuszek: I use Creator.because right now I can see result of my job and i can qickly change ideas ,
    I tried with JDeveleper but i did'nt find this functionality (wich version do you prefered ?) , unfortunately i have to deploy my application on Tomcat. This is my study project, and i make this to become a Master of Techinal Univeristy ;), Deadline time is 30 th September :(
    greetings

  • Problems with the resources boundles in java studio creator 2

    I try to migrate a proyect from sun java studio creator 2 early access to sun java studio creator 2 but I have a problem, the resource bundle work in creator 2 early access but doesn� work in creator 2, somebody have the same problem?
    and, the most important somebody could fix the problem?
    Note. sorry I�m learning english

    If I choose for SJSC2 to create JSF applications then
    one, or better THE, reason is the (drag and drop)
    Design editor functionality.
    Using resource bundles is a MUST. So if this means I
    cannot use the Design Editor in combination with
    resource bundles, then I will use something else...
    I think there should be a statement issued by the
    SJSC2 team about this bug and what the timescale for
    a decent solution wll be.
    Regards,
    Marcel
    BTW: overall SJSC2 seems to be a good alternative to
    develop an open source JSF application in a competing
    timeframe.I agree. This bug is even more exacerbated by the fact that the error message is entered in the design form and generally clutters more room than was originally intented for the text. Not having i18n is a show stopper right now. Creator2 will have to fully support i18n before we can start using it.

  • Problem installing sun java studio creator

    I have downloaded the installable for sun java studio creator 2 update 1 for windows platform. I am unable to install the package. Following is the error Iog I get, when used in debug mode(Notice the last part ErrOut indicating the error). What is going wrong ?
    file type: 0
    file id: 0
    length: 178
    offset: 319579
    file name: instructions.txt
    file type: 5
    file id: 1
    length: 1009
    offset: 319757
    file name: Verify.jar
    file type: 2
    file id: 2
    length: 729
    offset: 320766
    file name: launch.txt
    file type: 4
    file id: 3
    length: 16766119
    offset: 321495
    file name: Windows-Sun-1.4.2_04.exe
    file type: 6
    file id: 4
    length: 249333158
    offset: 17087614
    file name: windows.jar
    Executing launch script command: "C:\DOCUME~1\JATINK~1\LOCALS~1\Temp\LRE5.tmp/bin\java.exe" -cp "";"C:\DOCUME~1\JATINK~1\LOCALS~1\Temp\LRE6.tmp\windows.jar";"" -Dtemp.dir="C:\DOCUME~1\JATINK~1\LOCALS~1\Temp" -Dis.jvm.home="C:\DOCUME~1\JATINK~1\LOCALS~1\Temp\LRE5.tmp" -Dis.jvm.temp="1" -Dis.media.home="C:\DOCUME~1\JATINK~1\LOCALS~1\Temp\LRE6.tmp\windows.jar" -Dis.launcher.file="D:\installables\Java Studio Creator\creator-2_1-windows-ml.exe" -Dis.jvm.file="C:\DOCUME~1\JATINK~1\LOCALS~1\Temp\LRE5.tmp\jvm" -Dis.external.home="D:\installables\Java Studio Creator" -Xms20m -Xmx60m run in working directory D:\installables\Java Studio Creator
    Output from the launch script execution
    StdOut:
    ErrOut:
    Assertion failed: errno == 0 && count == (size_t) size, file ../../../src/share/native/sun/awt/font/fontmanager/fontobjects/fontObject.cpp, line 506
    This application has requested the Runtime to terminate it in an unusual way.
    Please contact the application's support team for more information.

    Hi Soumik,
    Here is the URL to the Sun Java Studio Creator Forum: http://swforum.sun.com/jive/forum.jspa?forumID=123
    I apologize for missing out on giving the link in my previous post.
    Thanks
    Giri :-)

  • JSF conflict with Sun Java Studio Creator

    I was trying to use JSF but when i was installing Sun Java Studio everything went ok but there was a step saying "Deploying Web Services" that tool a lot of time about 10 minutes. So i cancelled it and the Sun Java Studio Creator was working well then when i was running the small application it didnt do anything. I think something wrong with the application server. I uninstalled Sun Java Studio Creator and installed it again.
    This time no problems in installation. Then when i was creating a new JSF application when i press finish an error(1) appears and the finish button is dimmed so i have to press cancel and another error occurs(2), but the project gives an error message(3)
    I have been trying to solve this problem but i dont know what to do.

    Please check / post the Creator log file ( Tools -> Java Studio Creator Log File)
    Check / post the server log file as well, which will give more info.
    To view the Sun Java System Application Server log file:
    In the Servers window, right-click the Deployment Server node and choose View Server Log.
    In any text editor, open the log file in the following location: install-directory\SunAppServer8\domains\creator\logs\server.log

  • Java Studio Creator ...

    Hi,
    I've downloaded the now free version of Java Studio Creator, and on the download page I was told I'd be emailed the serial number required for installation. Does anyone know how long this takes, or has anyone an email address I can contact Sun direct on !?
    Also, does anyone know if Enterprise Studio works on Mac OS X as there doesn't seem to be a download link ... or is it best to just use NetBeans for Web Service creation !?
    Thanks for your help.
    Mic

    Yep I'm positive the email address is up to date, as I only became a SDN member yesterday and received my confirmation ok.
    I don't think to be able to use the product you should have to download the EA of the next release.
    I think Sun should address this problem as searching the forums it seems like I'm not the only one affected.
    I have been in touch with Sun Support this morning, on the phone, via the feedback links and direct email and no-one seems to care. One stated that now because it's free they don't offer Technical support, but couldn't understand that in order to require Technical support you have to at least get as far as installing the product. I was after someone to confirm that the instructions on the website were correct and that I would either receive the serial number or someone could get one for me.
    I did after a few emails going back and forth, mention that I have seen lots of press interest (especially online) about Sun releasing these tools FOC, and wondered how they would be interested of my experiences to actually get hold of the software, and others. Since then I've had no response.
    I would love to be able to use the product as it looks really sweet and I'm sure I could put it to some really good use, but only if I could get it installed.
    Mic

  • Can't install Java Studio Creator 2!!!

    Hello,
    First of all I just want to say that I tried a lot to solve this problem myself, I read lots of help and visited lots of website, but couldn't solve this problem !!!!!!!
    I downloaden Java Studio Creator 2 and trying to install it, but while installing the installation just stops without saying anything!!
    I downloaded it several times now coz I thought the file was corrupt, but it didn't work!!.
    I never had the Creator before so the other tips wouldn't work!!!
    At the end of all wizard screens when it should install the Creator 2 the installation exits withouts giving any messages and does nothing more!
    Could someone please give me some advice on how to slove this problem?
    Thanks in advance

    You are probably running out of Ram, and maybe even low on hard disk space to. The minimum system requirement is 512 MB of Ram. I am running 768 MB, but even with that I am virtually maxed out with Creator, a database, and the App server running. Those three items are really needed for development, and I have noticed that if I do actually max out the RAM the Appserver will not start and I have to reboot.
    I would say for development with creator you really need 1 Gig of Ram, which I will be upgrading to in a couple weeks.

  • Cloudscape & Java Studio Creator - Need Connection URL for toursDB

    Has anyone been able to create a data source and connect to the bundled demo databases in the default Cloudscape installation (sample or toursDB) with Java Studio Creator on MacOS X.
    I have Cloudscape running ok and I have Java Studio Creator running and I added the "derby.jar" and "derbytools.jar" files to the jar list in Java Studio creator but I'm not sure what the connection URL should be to connect to the example databases.

    Well, I think I now to having everything working!! I was able to connect to one of the sample Clouldscape databases (bundled with the Cloudscape 10.0 distribution in SJCS) - I had to do the following
    --- 1 --- After downloading a Java tool called DbVisualizer Free 4.1.1 and reviewing its documentation I was able to discover how to set an essential Java System Property for it as well as Sun Java Studio Creator on MacOS X. The property was derby.storage.fileSyncTransactionLog=true. This was needed to work around an Apple Java VM problem by bypassing code that uses write sync (rws) mode. The info for this is on the Apache site at: http://www.ibm.com/Search?q=Cloudscape+failures+on+Mac&v=14?=en&cc=zz&Search.x=47&Search.y=10 and the info for setting system properties on "double clickable Java Apps" on MacOS X can be found at: http://www.dbvis.com/products/dbvis/doc/4.1.1/doc/ug/admin/admin.html
    --- 2 --- Using the tool in *1* above I then actually got it to connect to an existing sample bundled Cloudscape database using the following connection URL jdbc:derby:/pathToTheDatabaseDirectory (needed to add the path to the URL) and the userID and Password as user1,user1 for reasons stated in the following forum link http://www-128.ibm.com/developerworks/forums/dw_thread.jsp?forum=370&thread=66046. I also used the driver class org.apache.derby.jdbc.EmbeddedDriver.
    --- 3 --- Finally, using the config info I used in *2* above I then used the following settings in Sun Java Studio Creator
    DataSource Settings Panel Fields set as follows (for Cloudscape 10.0 installation)
    DisplayName ---> Cloudscape
    JDBC Driver Jar Files ---> derby.jar
    Driver Class Name ---> org.apache.derby.jdbc.EmbeddedDriver
    URL Template ---> jdbc:derby:
    And then......Add Data Source panel fields set as follows
    ---DataSourceName --> datasource1
    ---ServerType____ Cloudscape
    ---HostName ---> left this blank
    UserID -> user1
    ---Password ---> user1
    ---DatabaseURL ---> jdbc:derby:/Applications/IBM/Cloudscape_10.0/derbyDB
    ---DriverClass ---> org.apache.derby.jdbc.EmbeddedDriver
    thanks for your help. I had been able to connect to Cloudscape programmatically (which your blog documents well), but getting the Sun Java Studio Creator (SJSC) IDE configured for Cloudscape wasn't obvious. Hopefully the above info in *1* and *3* will help anyone using the SJSC IDE on MacOS X. The DbVisualizer Free 4.1.1 is a slick tool I discovered along the way as well.

  • Is Java Studio Creator only for very little projects?

    Hi
    I'm developing a large program with about 100-pages. I found terrible to navigate by ApplicationOutline, Property Binding and Page Navigation.
    1. ApplicationOutline should show subfolder structure hierarchically
    2. Property Binding should open the page of the binding element, and hierarchical property should be alphabetically sorted
    3. Graphical Page Navigation is just a game. I need only a tree view with add/delete management
    of navigation-rule
    Thanks
    Nicola Grippaldi

    "Sun Java Studio Creator 2, Early Access
    Please be aware of the following issues:
    * There are a number of known issues with the Refactoring feature.
    Before using it:
    - Make a backup of your project
    - Read the full Release Notes referenced below
    * Avoid using subfolders for your web pages.
    * You might have deployment problems, such as:
    - OutOfMemory exceptions
    - Theme switching not taking effect
    - Some other deployment failure
    If you do have these deployment problems, then:
    1) Undeploy.
    2) Stop the Application Server.
    2) Clean the build.
    3) Start the Application Server and redeploy.
    * Projects created in Creator 1.0 can be imported, but you cannot
    use the new components on the imported pages. We are investigating
    creating a conversion utility to the new page structure.
    The Sun Java Studio Creator 2 Installation and Release Notes provides
    information on installing and uninstalling the product and describes
    known bugs and issues. The document is located at:
    http://developers.sun.com/prodtech/javatools/jscreator/ea/jsc2/reference/docs/Installation_ReleaseNotes-ea.html
    Thank you for evaluating our Early Access release."
    This is the content of the README.html.
    Creator is only a preview and you should not try to use it with large web sites. The tool has so many bugs and performance lacks, many features seem not to be tested by Sun that it would be a waste of time.

  • Help needed with Sun Java Studio Creator and EJB in a Portlet Project

    Hi
    I have created an web-application with JSF in Sun Java Studio Creator 2. The web application uses a lot of EJB's which acts as the dataProviders. In a typical jsp page i have more that one data providers(the EJB's) getting used. When i run the project everything opens up properly in the browser and the application seems to be fine.
    But when i create a JSP 168 Portlet project and do exactly the same thing for some reason the Apache Pluto(comes as the default Portlet Container with Studio Creator) conks off.
    Then i started going ahead step by step:
    1. First i created a portletpage and added only one dataProvider(EJB) and ran the project...It gets deployed properly in Pluto and the browser comes up and everything shows up fine.
    2. Just to re-confirm i did the same thing with another dataProvider(EJB). So still we have just 1 EJB in the portlet page. As expected it also worked fiine.
    3. Then when I added more that one dataProviders(EJBs) in the porlet page the Apache Pluto conks off(saying that Pluto is not available)
    I tried doing a lot of things but nothing works...Surprisingly the same thing works when u create a JSF web Application project but the same thing does not work when u create a JSR 168 JSF Portlet Project...
    Did anybody face the same problem..Is it a bug in the Studio Creator...Any help would be highly appreciated.

    Hi,
    There are a few discussion threads in the feedbackprograms portal for Creator 2 EA 2. The URL is:
    https://feedbackprograms.sun.com/login.html
    In the EA discussion forum you will find threads which discuss the concerned topic. In specific look for threads titled:
    # Deploying Portlets
    # Taking a JSC Portlet to Tomcat creates a Faces Mapping Error
    # Problem with Pluto when trying to deploy a portlet
    # Request: JSR-168 Portlet Project without JSF
    We kindly request you to post your further queries related to EA in the above mentioned forum.
    Cheers
    Giri

  • Web Service + Complex Type + Java Studio Creator

    Hy all!!
    I am using Ubuntu 7.04 + Java Studio Creator 2 and i'm trying to use a webservice.
    This webservice uses a Complex Type and was made in PHP.
    I guarantee that this webservice is working with complex type because i've tested using a PHP client.
    I have already worked with others webservices in Java Studio Creator using simple types!
    So I went to Add Web Service, put the wsdl link, Get Web Service Information and then Test Method that uses Complex Type.
    Then I gave a input value and when I submit i got this error:
    InvocationTargetException com.sun.rave.websvc.ui.ReflectionHelper.callMethodWithParams(ReflectionHelper.java:459) com.sun.rave.websvc.ui.TestWebServiceMethodDlg$MethodTask.run(TestWebServiceMethodDlg.java:1031) java.lang.Thread.run(Thread.java:595) null sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) java.lang.reflect.Method.invoke(Method.java:585) com.sun.rave.websvc.ui.ReflectionHelper.callMethodWithParams(ReflectionHelper.java:450) com.sun.rave.websvc.ui.TestWebServiceMethodDlg$MethodTask.run(TestWebServiceMethodDlg.java:1031) java.lang.Thread.run(Thread.java:595) Runtime exception; nested exception is:
    [failed to localize] nestedDeserializationError([failed to localize] xmlreader.unexpectedState(END, START: nome))
    com.sun.xml.rpc.client.StreamingSender._handleRuntimeExceptionInSend(StreamingSender.java:318) com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:300) webservice.Grs_PortType_Stub.buscarCompleto(Grs_PortType_Stub.java:122) webservice.grs.grsClient.buscarCompleto(grsClient.java:36) sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) java.lang.reflect.Method.invoke(Method.java:585) com.sun.rave.websvc.ui.ReflectionHelper.callMethodWithParams(ReflectionHelper.java:450) com.sun.rave.websvc.ui.TestWebServiceMethodDlg$MethodTask.run(TestWebServiceMethodDlg.java:1031) java.lang.Thread.run(Thread.java:595)
    [failed to localize] nestedDeserializationError([failed to localize] xmlreader.unexpectedState(END, START: nome))
    com.sun.xml.rpc.encoding.ObjectSerializerBase.deserialize(ObjectSerializerBase.java:233) com.sun.xml.rpc.encoding.ReferenceableSerializerImpl.deserialize(ReferenceableSerializerImpl.java:155) webservice.Grs_buscarCompleto_ResponseStruct2_SOAPSerializer.doDeserialize(Grs_buscarCompleto_ResponseStruct2_SOAPSerializer.java:43) com.sun.xml.rpc.encoding.ObjectSerializerBase.deserialize(ObjectSerializerBase.java:192) com.sun.xml.rpc.encoding.ReferenceableSerializerImpl.deserialize(ReferenceableSerializerImpl.java:155) webservice.Grs_PortType_Stub._deserialize_buscarCompleto(Grs_PortType_Stub.java:186) webservice.Grs_PortType_Stub._readFirstBodyElement(Grs_PortType_Stub.java:160) com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:215) webservice.Grs_PortType_Stub.buscarCompleto(Grs_PortType_Stub.java:122) webservice.grs.grsClient.buscarCompleto(grsClient.java:36) sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) java.lang.reflect.Method.invoke(Method.java:585) com.sun.rave.websvc.ui.ReflectionHelper.callMethodWithParams(ReflectionHelper.java:450) com.sun.rave.websvc.ui.TestWebServiceMethodDlg$MethodTask.run(TestWebServiceMethodDlg.java:1031) java.lang.Thread.run(Thread.java:595)
    Any help would be appreciated!
    Thanks a lot!
    Mario Mol

    Have you seen this?
    http://developers.sun.com/jscreator/reference/techart/2/create_consume_web_services.html
    Also have you tried the latest and coolest IDE Netbeans 6?
    It includes all the features of Creator plus lots more.
    Thanks
    K

  • How To Increase heap size in Java Studio Creator 2

    Hi,
    I'd like to know how I can increase the heap size in Java Studio Creator 2.
    I already tried editing creator.conf, but it doesn't seem to work...
    Can anybody help me?
    thanks.

    In the servers window of creator, right-click 'Deployment Server' and choose 'View Admin Console'. A new web page comes up with the web interface to the Sun Application Server 8. Type your username and password that you configured during installation. I think default username is admin and default password either admin or adminadmin. After you're in, click 'Application Server' link in the left window, then click 'JVM Settings' tab, then click 'JVM Options' tab. Add new JVM option -Xms512m to start the server with 512MB. Find the -Xmx option and edit it to something larger, provided you have enough memory on your system.

Maybe you are looking for