Java(TM) Platform SE binary has stopped working when I install Java

Hi everyone
I have a computer where I not can uninstall or install Java.
Every time I try to run the Java uninstaller, or the Java installer (the latest version 7 Update 51),
Windows give me the following message:
Java(TM) Platform SE binary has stopped working
A problem caused the program to stop working correctly.
Windows will close the program and notify you if a solution is available.
When I click ok to the message, the uninstaller process continue, and after that, I guess Java is
correct uninstalled, but I am not sure, because I still can find an add-on in Internet Explorer 11 from Java, but the folders etc. from the computer is
deleted.
Therefore I searched in the Windows registry database, and deleted all keys and sub keys regarding Java.
Before I tried to install Java again, I run a registry cleaning tool and the tool also find many errors that I fixed with the tool.
When I tried to install the latest version of Java again, the installation program give me the same results I describe above.
After the installation I am more confused before I uninstalled the older version, because:
1. When I start up Internet Explorer 11, I allow that the Java ADD-On must run, but if I try to verify that Java is installed correctly nothing happen
2. If I try to run Java in the browser Google Chrome, Java run correctly, and I also can verify that Java
is installed correctly.
Another error message
Windows give me when I installed Java is that a process in Windows called
Rundll32.exe is stopped.
When I install / uninstall other programs all working fine.
If you have a solution I can try, or alternative an answer to why the problem come up, I will be
happy.
The computer is running Windows 7 64-bit Service Pack 1.
Thanks in advance.
Regards,
Anders

Have you installed Microsoft Office 2010 on your development machine?
Especially if you have installed Office Groove 2010, this problem will happen.
So, uninstall Groove and try to create a process. If the problem still persists, unstall Office 2010 compeltely and try again.
Nith

Similar Messages

LiveCycle Workbench ES2 - "Java(TM) Platform SE binary has stopped working" Error

Hi,
I am getting this error when I try to create a new process o open an existing process.
"Java(TM) Platform SE binary has stopped working"
The only option is to click on a "Close" button and end the LC Workbench ES2 program.
Also, when I try to open an existing form, it displays 'garbage' - a screenfull of control unrecognizable characters - instead of the form itself.
When this error comes up, I also get a pop-up window with a list of log entries / errors (please see attached: Java Platform SE binary has stopped working.jpg)
Environment:
Windows Vista Ultimate running on HP Desktop (e9107c Intel CORE 2 Quad Processor withy 8 GB RAM, 750GB HDD)
Downloaded and installed the Trial Version of LiveCycle ES2 package (Windows JBoss version)
The LiveCycle ES2 server is installed properly and is working with the following services. Are there any missing services?
LiveCycle Output ES2, LiveCycle Rights Management ES2, LiveCycle PDF Generator ES2 Evaluation, LiveCycle Process Management ES2, LiveCycle Workspace ES2, Applications and Services, LiveCycle ContentServices ES2, LiveCycle Forms ES2
I already had Adobe Acrobat Pro Extended 9.2 and the associated LiveCycle Designer instaleld prior to installing the Trial of LC ES2.
Basesd on the installation insttructions, I deleted the Designer ES from my Acrobat Pro Extended and instaleld the LC Workbench ES2.
Now I don't see a seprate entry for the LC Designer ES2 anymore on my Start >> Programs.
And th newly installed LC Workbench is not working
Any help in making the workbench 'work' is greatly appreciated.
Are there any tests we can do to troubleshoot this?
Thanks.

Here is some additional information that may be helpful in identifying the cause for this problem.
Here is the Exact ERROR :
Java (TM) Platform SE binary has stopped working
A problem caused the program to stop working correctly.
Windows will close the program and notify you if a solution is available.
Button: "Close Program".
On clicking that button, the error window goes away; the main LC WB ES2 program also closes; but a long error window appears. The full screenshot was attached in my original message. The top few lines are reproduced below.
JVMterminated. Exit code=255
C:\Program Files (x86)\Adobe\AdobeLiveCycleWorkbench ES2\workbench\jre\javaw.exe
-Xms128m
-Xmx512m
-XX:PermSize=256m
-XX:MinHeapFreeRatio=40
========Here is teh cutrrent status ===================
Adobe LiveCycle Designer ES2 is working properly: Good
Adobe LiveCycle Workbench ES2 has ONE problem
1. Program Starts properly
2. I am able to login to the LCES2 server
3. I am able to Browse and select sample projects
4. I am ble to create an Application, a folder, and a Form
5. I am able to invoke the LC Designer ES2 from within Workbench (while creating a form)
6. I am able to "invoke" an existinmg sample process in a web browser (not within workbench environment)
The main problem is...
I am NOT able to create a new process or open existing process using workbench.
Since it gives Java Platform SE error, I checked the versions of various Java Run Time Environments on my pc.
Properties of javaw.exe in different folders:
1. My Computer's JRE (common to all apps)
Folder: Program Files\Java\jre6\bin\
File Name: javaw.exe: Java Platform SE Binary
Version: 6.0.170.4
2. Adobe LiveCycleWorkbench ES2
Folder: Program Files (x86)\Adobe\Adobe LiveCycleWorkbench ES2\jre\bin\
File Name: javaw.exe: Java Platform SE Binary
Version: 6.0.20.6
2.1 Adobe LiveCycleDesigner ES2
Folder: Program Files (x86)\Adobe\Adobe LiveCycleWorkbench ES2\LiveCycleDesigner ES2\jre\bin\
File Name: javaw.exe: Java Platform SE Binary
Version: 6.0.140.6
2.2 workbench
Folder: Program Files (x86)\Adobe\Adobe LiveCycleWorkbench ES2\workbench\jre\bin\
File Name: javaw.exe: Java Platform SE Binary
Version: 6.0.70.6
I tried to use the same versions of JRE in all these folders; that didn't work..
I hope someone can throw more light on this and find the real cause.
Thanks a lot in advance!

Got the error message ("Java(TM) Platform SE binary has stopped working")

Hello Gurus,
I installed java jdk1.6.0_24 in my laptop. After that i gave the command javac, i got the error message ("Java(TM) Platform SE binary has stopped working"). I willl highly appreciate any help on this.
The OS on my laptop is Windows Vista Home Premium 64 bit.
Thanks,
Vish

Vish,
You may want to try one of the Java forums, as your question is specific to the JDK/JRE, and nothing to do with JDev/ADF. {forum:id=937} might be a good starting place.
John

Can't install netbeans 8 on windows 7 ultimate 32 bit (Java Platform SE binary has stopped working), problem event name : BEX

I can't install netbeans 8 on my windows 7 ultimate 32 bit. Please help me.. This is the error message :
Java Platform SE binary has stopped working
Problem signature:
Problem Event Name:   BEX
Application Name:   java.exe
Application Version:   8.0.5.13
Application Timestamp:   53280287
Fault Module Name:   StackHash_2264
Fault Module Version:   0.0.0.0
Fault Module Timestamp:   00000000
Exception Offset:   00000040
Exception Code:   c0000005
Exception Data:   00000008
OS Version:   6.1.7600.2.0.0.256.1
Locale ID:   1033
Additional Information 1:   2264
Additional Information 2:   2264db07e74365624c50317d7b856ae9
Additional Information 3:   875f
Additional Information 4:   875fa2ef9d2bdca96466e8af55d1ae6e
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

1. I had similar problem and upgrade of BIOS has helped.
2. Try Oracle support forum if 1 does not help.
Rgds
Milos

Java Platform SE binary has stopped working

I have a strange problem with my system. If I have a jar or an applet running, then try to launch a second jar or applet, I get an error stating:
Java Platform SE binary has stopped working
Details:
Event: APPCRASH
Application: javaw.exe (or java.exe)
version: 6.0.260.3
timestamp: 4dc1160c
Fault Module: java.dll
Fault Version: 6.0.260.3
Fault TimeStamp: 4dc14bf1
Exception Code: c0000005
offset: 00004e2f
OS version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Additional 1: 1ec0
Additional 2: 1ec0fd70d07d06e5bfcf53c69ad1739
Additional 3: 2c48
Additional 4: 2c48940de5e7d1cb2e131ad6a0ca2feb
My system is a MACbook Pro running Windows 7 64-bit via bootcamp (yes, I'm booting into Windows). I have both java 32-bit and java 64-bit installed on my system. The executables are located in all the correct paths (I think) C:\Program Files, C:\Program Files (x86), and C:\Windows\System32. I've uninstalled and reinstalled all java versions multiple times and have tried executing the installer as the Admin (I have full admin rights). I also tried disabling the Symantec Endpoint protection during installation. A few other users in my company are also using the exact same system set up as I am; however, they are not having this problem. We are releasing a Netbeans based development tool to our customers very soon (it's out in Beta form now), so I really need to get this issue resolved. Does anyone have an idea on how to fix this?
Thank you!!

I have the same problem. I have un installed and installed java jre n jdk 6 and 7 versions multiple times. I am also runing win 7 64bit OS on macbook. I am getting this problem at the time of installation and running of both oracle OBIEE and jasper BI suits. Because of this error I tried installation of these products even after formatting my pc several times with brand new installation of BI products.

Java(TM) 2 Platform Standard Edition binary has stopped working

Does anyone ever put ODAC10203x64.zip into Windows Server 2008 x64? I hit the error:
Java(TM) 2 Platform Standard Edition binary has stopped working
Ming Man

Hi Mark,
Let me get you more details.
I have Windows Server 2008 x64 running with Visual Studio 2008 installed.
For Oracle, I have cleared all my previous installation and even deleted all the folders for previous installation of ODP.NET. After that I only installed the Oracle Database 10g Client Release 2 (10.2.0.4) from the link you gave (I installed all the components) :
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10204_winx64_vista_win2k8.html
I have Oracle Database 11g running on VMWare on Windows XP 32 bit.
When I run my WinForm application using code so far so good. I extract data from the HR schema and put them in listbox, perfectly no error.
But when I am trying to create by Add New Data Source... then I hit the:
Attempt to load Oracleclient libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components
Hope that can give you a better idea.
Ming Man

JAVA(TM) SE binary has stopped working

Dear Experts,
We have JAVA SE 7 version and it was working fine earlier however from last week we could not use SAP PI in Internet Explorer due to the error JAVA(TM) SE Binary has stopped working.
we have uninstalled all the JAVA from the desktop and re-installed but there was no luck.
Please help me to sort it out this issue.
in detailed view i got the below message.
Problem signature:
Problem Event Name: APPCRASH
Application Name: javaw.exe
Application Version: 7.0.250.17
Application Timestamp: 51c4b1ff
Fault Module Name: jvm.dll
Fault Module Version: 23.25.0.1
Fault Module Timestamp: 51c4bb9c
Exception Code: c0000094
Exception Offset: 00000000002970d9
OS Version: 6.1.7601.2.1.0.16.7
Locale ID: 6153
Additional Information 1: 7fd2
Additional Information 2: 7fd27114125d9a11bdaaf0a55d467c1e
Additional Information 3: c523
Additional Information 4: c5233889195b66df77e48e2eea95e687
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Hi,
In order to narrow down the cause of the issue, would you please provide the complete error you received? In addition, have you tried to uninstall Java completely and download latest version
from http://www.java.com/en/ to see if it could resolve the issue?
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

Java(TM) Platform SE binary doesn't work on any website, on any browser

I'm on Windows 7 Ultimate 32bit, everything's working fine, I always keep my system clean, I also keep the registry as clean as possible, I have a problem from at least a couple of months, so "Java(TM) Platform SE binary" doesn't work on any website, on any browser, it always crash, I tried everything, I mean EVERYTHING! I've uninstalled and re-installed java a thousand of times, completely uninstalled, removed all files, all registry entries, nothing seems to work..I always get the same message..
here's the error signature:
Firma problema:
Nome evento problema: BEX
Nome applicazione: java.exe
Versione applicazione: 7.0.400.43
Timestamp applicazione: 521c3bf2
Nome modulo con errori: ntdll.dll
Versione modulo con errori: 6.1.7600.16385
Timestamp modulo con errori: 4a5bdadb
Offset eccezione: 0001d78d
Codice eccezione: c0000409
Dati eccezione: 00000000
Versione SO: 6.1.7600.2.0.0.256.1
ID impostazioni locali: 1040
Informazioni aggiuntive 1: a091
Ulteriori informazioni 2: a0912fac5db1285ab245a51982c0da6c
Ulteriori informazioni 3: 0ef4
Ulteriori informazioni 4: 0ef461fa84dd27e3340858dc9ed3bcb3
and here's a video (made by me) of the problem: Java(TM) Platform SE binary stopped working - YouTube
can anyone help me find a solution?
Thanks

Looks like you have conflict with your java home and you are running 2 different JREs. Keep the latest and try launching EM console again and post the exception if you get any.
Thanks,
Vijay

Bridge CC on opening gives "Adobe Bridge CC has stopped working" Uninstalled, re-installed same error, will not run. "check online for a solution" does nothing.

Bridge CC on opening gives "Adobe Bridge CC has stopped working" Uninstalled, re-installed same error, will not run. "check online for a solution" does nothing.
Bridge worked great for a while then started to fail when starting. Old Bridge CS6 still works fine. HELP ... please.

You problem is in the Fault Module MSVCR80.dll
Do a web search for this. Here is one LINK

I get a message that itunes has stopped working when I try to sync photos

I get a message that itunes has stopped working when I try to sync photos. Error message says "APPCRASH ..."
Can anyone help? Thanks.

I found the file but when I added it to the list for the Data Execution Program to ignore , I received a message that the Program.x86/itunes file must have the DEP on in order to run. Anyone else having this problem ?

Error "Licensing for this product has stopped working" when you launch Acrobat 9

Hi,
I'm part of service desk and my company has several thousand users of Acrobat. There has been strange issues reported since upgrading from 7.0.5 to 9.1 and a lot of them are uhappy. The latest issue is users started to receive the following error,
Error "Licensing for this product has stopped working" when you launch Acrobat 9 or Adobe Creative Suite 4 products. The link http://kb2.adobe.com/cps/405/kb405970.html#ErrorCodes has solution, but i tried everything given for 147-178, and nothing works. The users are highly frustrated. Any other possibilities? one collegue claims running simple reg cleaner could solve this issue.

Wow,
I went through a "font crisis" on my MacBook about two weeks ago, and I reinstalled Snow Leopard, then restored everything from Time Machine backup. Everything but Office 2008 and CS4 was able to run from the restore, because there were preferences for both that wouldn't copy back to my Library (permissions).
I reinstalled both from the "original media" (dmg's) with my Time Machine and 2 other external HDs connected and mounted. I had no problems with either. In fact since I was re-installing from dmg's stored on my Time Machine drive, I had to have it connected to do this. Installing Office and CS4 from the dmg's took all of twenty minutes for both with no errors at all.
I'm glad you got everything taken care of, but anectdotal evidence tells me CS4 can be reinstalled with external drives connected and mounted.

Can't open PDFs, Initially received runtime error,updated Reader - new error Adobe Reader has stopped working, uninstalled re-installed same error message Adobe Reader has stopped working

Can't open PDFs, Initially received runtime error,updated Reader - new error Adobe Reader has stopped working, uninstalled re-installed same error message Adobe Reader has stopped working

Assuming that you are in Win (which you haven't said), you can try using this tool to first remove all traces of previous versions of Reader:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
and run it immediately after restarting your computer.

I get an error message "Adobe Reader has stopped working" when i try to use Firefox

I get an error message "Adobe Reader has stopped working" when i try to use Firefox

I have also retarted twice...

Excel has stopped working when I try to launch Excel 2013 Powerpivot

Redirected from the Win 7 forum: (http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/excel-has-stopped-working-when-i-try-to-launch/01460690-abab-495f-ab5f-904f72f88668)
My system is a Windows 7 machine, 64 bit
I previously had Excel 2010 32bit with 32 both Powerpivot installed. However I am currently evaluating 64 bit Excel 2013 with Powerpivot for my company so I uninstalled Excel 2010 and installed an evaluation copy of Excel 2013 64 bit.
However whenever I launch Excel, enable Powerpivot, then click any of the Powerpivot buttons it gives me an error saying "Excel has stopped working".
I took a look in the Windows events logs and found:
Faulting application name: EXCEL.EXE, version: 15.0.4420.1017, time stamp: 0x506741b5
Faulting module name: mscorwks.dll, version: 2.0.50727.5477, time stamp: 0x5265c8ee
Exception code: 0xc0000005
Fault offset: 0x00000000002ba203
Faulting process id: 0x3e8c
Faulting application start time: 0x01cf52a7644eda9d
Faulting application path: C:\Program Files\Microsoft Office\Office15\EXCEL.EXE
Faulting module path: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\mscorwks.dll
Report Id: afa4f824-be9a-11e3-94ac-415645000030
I have tried uninstalling and re-installing as well as doing a Repair on my .net framework, which is the latest version.

You can go to check the dll file, what's size of this dll file?
If the file size is 0 byte, you can check the link below:
http://forums.steampowered.com/forums/showthread.php?t=2735528
Also you can go to check the disabled items (File->Options->Add-ins->Disabled items->Go) to see if any dll file was disabled.
In addition, Isn't the latest version of .NET Framework supposed to be 4.0?(Not quite familiar with this)
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee
the accuracy of this information.
Wind Zhang
TechNet Community Support

Error message - Captivate has stopped working - when publishing to MP4

I get and error message that Captivate has stopped working when I try to publish to an MP4. I am using Captivate 6. How do I solve this problem?

Hi Shivers,
What is the Exact version of Captivate you are using (Go to Help > About Adobe Captivate) ?
Please try to clear the cache of Captivate ( Go to Edit > Prefrences > General Settings)
See Screenshot
Please clear cache from computer as well..
Go to Start>Run>Type %temp% and then click on ok
Delete all the files from that folder(Some of the files which are in used will not get deleted , Ignore them)
Then try to Run as Admin and check if this works
Thanks and Regards
Himanshu Satija

Java(TM) Platform SE binary has stopped working when I install Java

Similar Messages

Maybe you are looking for