Java update breaks network connect

The latest Java update has broken my junipe netwrok connect, anyone got any ideas?

This worked for me:
http://groups.google.com/group/macenterprise/browse_thread/thread/6368431a9c273a 53
The key is:
"This update also configures the Java web plug-in to disable the automatic
execution of Java applets. Users may re-enable automatic execution of Java
applets using the Java Preferences application. If the Java web plug-in
detects that no applets have been run for an extended period of time it will
again disable Java applets."

Similar Messages

  • The latest Java update breaks some vital applications

    The latest Java update breaks some vital applications. I have reverted back to 7u45. But now, every time a java applet is used, the "later", "block", "update" window appears and stops the applet from loading. I must have this older release. Oracle does not throughly test their updates. Note: the apps the update breaks are actually Oracle apps.
    I have checked the "do not ask again until next relesse" box every single time. Worthless.
    Is there a way to stop Java version checks? I even have the box deselected for check for updates; ignored by OS X. I WANT CONTROL! Stop checking!
    Ideas?

    We are facing the same issue. We suggested all out customers not to install the updates Java 7u65 or 8u11 until there is a workaround or fix.
    The wrong look & feel is causing the following problems:
    - Either icons or text can be display on a button. Currently the majority of buttons are displaying an icon. Therefore the workaround is to set the text at least.
    - Scroll-bars are displayed within all cells of a table column. The circumstances are not clear when these scroll-bars are displayed.

  • Kernel Upgrade Breaks Network Connection

    My server uses:
    [15:48] (tunix@kulupler ~)$ pacman -Qs kernel
    local/kernel26 2.6.19.1-1
        The Linux Kernel and modules
    local/kernel-headers 2.6.19.1-1
        Kernel headers sanitized for use in userspace
    for kernel. The latest kernel upgrade (2.6.19.2-1) breaks network connection after ~5 minutes from the boot. When the network connections fails, kernel says:
    Jan 12 15:10:44 kulupler ADDRCONF(NETDEV_UP): eth0: link is not ready
    The connection never comes either after a network service restart, nor ifconfig eth0 up/down etc... The only solution is to restart, but after ~5 min. it fails again.
    So, as a solution, I just downgraded the kernel to 2.6.19.1-1 again.

    The AirPort Extreme base station (AEBS) is putting your PowerBook on a separate subnet. To solve the problem, configure the AEBS so that it does not distribute IP addresses.

  • IPhone 1.1.3 update problem - network connection could not be made

    Tried to download and install 1.1.3 update, but received message that there was a problem with the download that the network connection could not be made. Can anyone help?

    the update system of apple is currently flooded and busy because of many people getting the update i recommend checking it again later or tomorrow.

  • New Apple Java update breaks jnlp file association

    I thought this might be helpful for other people experiencing this problem.
    It seems that the latest Java update for Macs (10.5 update 4) breaks the file association for jnlp files. When you use one it opens up a text editor. To make matters worse they have moved the location of Web Start.
    The only way we have been able to fix this is:
    1. Control-click the jnlp file that was downloaded to the desktop and select “Get Info”
    2. Click “Open with” and select “Other…”.
    3. At the top of the window select “All Applications” in the Enable box.
    4. Browse to /System/Library/CoreServices and select Java Web Start.
    5. Click the “Always Open With” checkbox at the bottom.
    6. Click the “Add” button.
    7. Double-click the jnlp file on the desktop which should now launch the workbook.
    If anyone else has some more information or another solution, then please reply here.

    Thank you so much for this. I didn't find this post the first time I searched on this problem, and I was mired down in versions-specific directories with javaws--which appears only as a link that cannot be used as an association.
    MUCH appreciated!
    --Paul                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • IOS 5 update issues  "Network Connection could not be established"

    Keep getting error, "Network Connection cannot be established". I thought last night was possibly do to,
    server being busy. But at 06:30 this morning same error. MY info: Itunes 10.6,  Iphone 4S 5.01 Connected directly to my Macbook and internet connection is fine. Does anyone have or had same issue or ideas?

    Means go to SYSTEM PREFERENCES>NETWORK>ADVACED>DNS
    change DNS by adding ( + )
    208.67.222.222
    then
    208.67.220.220
    click okay/apply after. then try the update. after the update, just delete the two open DNS server numbers. should revert back to your old one.

  • My Safari browser not loading...why won't software update detect network connection?

    I am using Foxfire browser, and glad I did at least download such...even though Foxfire updates are not recognized by my Lion system.  This unnerves me a bit since I'd be dead in the water...and my Foxfire is getting more outdated by the day.
    My Safari browser comes up...but then does not load...remains blank.
    I tried doing a Software Update...but my system is not finding network connection.  When I did the diagnostic, my system DID recognize my wifi connection and as good.
    What should I do...?  Would like my Safari back, but more important I suppose is getting my software updates...
    thanks
    my system is Lion OS X  10.7.2

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Recent java update breaks SwingWorker

    Hi,
    Please correct me if I am wrong on any information that say here, but since I did a software update(had a java update) my application doesnt work!!!
    The problem is to do with the SwingWorker java class. In particular having multiple tasks! It only seems to be able to run 1 task now. I have demostrated this in a simple demo application. I would think that this issue would have quite a big impact on users.
    Also searching the net I found a recent bug listing in java.
    http://bugs.sun.com/bugdatabase/viewbug.do?bugid=6880336
    Please note that this bug also impacts 10.6.

    Welcome to the forums!
    You will probably get better information from the Swingworker forum:
    http://forums.sun.com/forum.jspa?forumID=57&start=0
    as it is not an Apple product.

  • Latest JAVA update breaks numerous web page services - how do I uninstall?

    Since applying the most recent JAVA update, Java server pages that use dropdown menus that worked in the past no longer stay dropped down. On the click down action, the menu appears briefly then disappears so it is now impossible to use these critical menus.
    Clearly something is defective in this update. How do I uninstall it?
    Thanks,
    Ross

    Did you try changing the active Java version? Applications>Utilities>JavaPreferences.

  • Java update breaks apps

    just updated my java, thus found out most of my java apps broke
    Dude seriously, never gonna update java when apple wants me to.
    How do I go back?

    I reported this problem to Apple in bug 6985275. They closed it as "Behaves correctly", with this reply:
    09-Jul-2009 10:09 AM Jason Yeo : Engineering has determined that this issue behaves as intended based on the following information: The double-clickable Java Web Start.app is no longer required to be present in /Applications, because it's UI has been integrated into Java Preferences. The Java Web Start.app JNLP launcher is present in /System/Library/CoreServices, however there are no user-serviceable parts inside.
    I don't think they understand the problem. By relocating Java Web Start, they've broken the JNLP file type associations, causing JNLP files to open in TextEdit. You can see this by getting "Info" for a JNLP file in the Finder; the associated application for open the file will be TextEdit. If you manually install the Java update again (not via Software Update, download the .dmg) this corrects the problem.

  • SLM2024 port mirroring breaks network connections

    Hi all, I got an SLM2024 that I want to use with my network probe app to analyze packets, I have my network probe PC plugged into the target port and uplink to firewall's trusted port to source port of 2024. Now whenever I enable port mirroring on the 2024, I lose all network connections on the 2024, I searched around here but didn't really find my answer. If anyone's seen this before, any pointers would be great.

    Hi Crash, thanks for the reply, yeah it's a similar setting on that model just with a different layout on the admin page, what I meant on the trusted port part is, I have a netscreen firewall and the trusted port of the firewall goes into the source mirrored port of the slm2024, and my PC is on the target port. And I have those mirrored with a setting for both tx and rx, whenever I enable mirroring it halts traffic from the firewall, and others that are on the 2024 like server/workstns.
    But network probe works and I can see traffic. We had a cisco catalyst before and that had no problems using the span feature.

  • Mac 10.8.x Latest Java Update Breaks SVG

    On the latest Mac version, our Desktop application that utilizes vector graphics is suddenly broken. The SVG images are no longer appearing/displaying on the screen like normal. This is only with Mac 10.8.x and the latest release of Java. Any suggestions on what could cause this, how to go about troubleshooting this, or where else to post this question is much appreciated.
    Thank you.

    We are facing the same issue. We suggested all out customers not to install the updates Java 7u65 or 8u11 until there is a workaround or fix.
    The wrong look & feel is causing the following problems:
    - Either icons or text can be display on a button. Currently the majority of buttons are displaying an icon. Therefore the workaround is to set the text at least.
    - Scroll-bars are displayed within all cells of a table column. The circumstances are not clear when these scroll-bars are displayed.

  • HT3669 after updating lost network connection to my HP6310

    An Apple HP Driver Update came out on Jan 10 2013 after installing the update I can no longer find my printer on the network (HP Officejet 6310 All In One). I know it's an older printer but it still works worked just fine. Can anyone tell me how to fix this? I can plug in the USB and it works but that's not practical with a laptop.

    An Apple HP Driver Update came out on Jan 10 2013 after installing the update I can no longer find my printer on the network (HP Officejet 6310 All In One). I know it's an older printer but it still works worked just fine. Can anyone tell me how to fix this? I can plug in the USB and it works but that's not practical with a laptop.

  • Remote Desktop 3.3 update breaks SSH connectivity

    Since updating to Remote Desktop Admin 3.3, I am no longer able to use ARD over a SSH tunnel.
    This is a serious bug - especially since there is no easy way to rollback to the previous version.
    I would strongly recommend against running this update if you ever need to work in this way.

    This is since the screen sharing port was set to 5900 in the update. Changed it to my desired port and all is well!

  • Software upgrade breaks network connection

    After upgrading the software for the Airport base station I have lost connection between my desktop unit and PB.
    Prevously this worked without any problems.
    The configuration is:
    Cable modem connected to ASANTE 3004.
    Desktop connected to ASANTE
    AEB Connected via the WAN to ASANTE
    PB using Airport to connect to ASANTE
    eMac Connected to the ASANTE, this is seen by the desktop.
    The PB sees the internet.
    The Desktop sees the internet
    But the PB using Airport doesn't see either of the Desktop units and vice versa.
    If I connect the PB to the ASANTE with a direct ethernet cable both units see each other.
    This seems to have been brought on by the upgrade to the base units software.
    Can anyone suggest what might have changed as a result of the upgrade or what could be the source of the problem?
    Richard Bullen
    G4 MDD   Mac OS X (10.4.3)  
    G4 MDD   Mac OS X (10.4.3)  

    The AirPort Extreme base station (AEBS) is putting your PowerBook on a separate subnet. To solve the problem, configure the AEBS so that it does not distribute IP addresses.

Maybe you are looking for