Java Update has killed VNC Console from VM Manager 3.1

Oracle VM Manager
Version: 3.1.1.305
Build: 20120430_305
I have recently updated to the most recent Java 7 update 7 on my Windows 7 64bit PC and can no longer VNC into my VMs from the VM Manager.
I even went to the trouble of uninstalling anything Java on this machine and then reinstalling however it still gives this error (text content at end of message)
http://i.imgur.com/ikcIS.jpg
So can someone please point me towards where I find the IP and port I should use to connect to my VMs with TightVNC directly?
The actual error in the text section below is
Problem signature:
Problem Event Name:     BEX64
Application Name:     javaws.exe
Application Version:     10.7.2.10
Application Timestamp:     503d7bc5
Fault Module Name:     javaws.exe
Fault Module Version:     10.7.2.10
Fault Module Timestamp:     503d7bc5
Exception Offset:     0000000000016448
Exception Code:     c0000417
Exception Data:     0000000000000000
OS Version:     6.1.7601.2.1.0.256.48
Locale ID:     3081
Additional Information 1:     d806
Additional Information 2:     d806766b06868b7edb630cb06c6aa7d0
Additional Information 3:     9428
Additional Information 4:     94288905092a426febff2b6139c6f8ed

I have not found a solution to this yet from my windows machine. I have since been using my Macbook to connect to VMs via the manager.
As you said I dont really want to revert back to an older version of Java due to security concerns.
Not sure who I can contact as I am currently only evaluating VM Server so do not have a support contract.
It was suggested by a colleague to edit the vm.cfg to allow vnc direct to each machine rather than through the manager. Oracle state they do not support manual modification of vm.cfg files so while possibly a workable solution might cause issues with the VM Manager or Oracle support down the track.
Note the first few lines of a vm.cfg which can be found on the VM Server /OVS/Repositories/0004fb......bfc70c/VirtualMachines/0004...197b99/
vif = ['mac=00:d2:e2:00:00:0f,bridge=192.168.64.0']
OVM_simple_name = 'OVM Manager'
vnclisten = '127.0.0.1'
While an older 2.x vm.cfg file looks like this
vfb = ['type=vnc,vncunused=1,vnclisten=0.0.0.0,vncpasswd=xxxxx']
Not ideal but might work if your desperate?
What would be nice is for Oracle to fix this issue.
Edited by: phoenixdigital on 06-Sep-2012 18:05

Similar Messages

Recent Windows 7 Update has killed windows

Help, I run Windows 7 in Bootcamp, recent windows 7 update has killed windows, this is what happens.
Choose to boot to windows - OK
Hit logon screen - OK
Logon - OK
Windows loads, the desktop shows for about 5 seconds and then the screen goes blank.
The computer is still ON but the screen is blank.
I can boot into safemode OK, but can't run the bootcamp update (that I downloaded from here) in safemode.
I tried a restore point, but the ones before the update create an error, so thats a no go.
My thoughts are that it is a video driver issue, but that doesn't explain how it gets passed logon working OK.
I don't know how to fix this if the only way to update drivers is via an .exe vs the driver files themselves like windows usually likes.

You could try this advice from the Windows side.
Startup Repair is a good place to start if your system starts acting up. If you can’t get the Advanced Boot Options screen by hitting F8, you can also access the tools by booting from a System Recovery Disc, or the Windows installation disc. While System Repair might not be able to recover your system in all situations, it’s a great starting point before getting into more detailed recoveries like Restoring from an image or clean install.
http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options -in-Windows-7

Java update has stalled ( 12 hours) - can I interrupt it?

Yesterday I got the Java update for OS X Lion in Software Update and clicked yes to install it. All went well for a while but it has been stuck at this point...
for over 12 hours now. The "stop" option doesn't seem to be available. Can I force a quit or force a shut down without causing grief?
Keith

should have shown this image...

Yosemite latest update has broken yahoo email from mail.app. Emails won't collect or send. Tried deleting the yahoo account, now I can't re-add it - "an unknown error has occurred"

Did the latest update to Yosemite last night. All day my mail has played up. Either it won't collect email from IMAP for long periods, or sent emails would just sit in outbox then send them periodically.
I've now tried deleting and re adding the account. But it won't re add correctly - I either get "an unknown error has occurred" when I try and add it as a "Yahoo" account, and if I try adding it as "other email account" it syncs up around 300 email messages and then won't work.
Please help, email is a vital cog in my day to day Mac use.
Thanks

This worked for me for my Yahoo.
http://osxdaily.com/2014/10/28/fix-mail-smtp-sending-errors-os-x-mac/
Good luck

10.4.7 update has killed me

Software update said the installation failed so I pressed quit and then it wouldn't open again, so then I tried rebooting my intel imac 20" and then it was stuck on the white screen with the apple logo and the spinning thing for about an hour. Booted up from the iMac install disk, repaired permissions. Still no dice.

"…Using third-party system modifications or Menu Extras are common culprits."
No-one knows this better than I after the most recent update.
I remembered to disable my personal login items of CopyPaste-X and MoonMenu, restarted just to check that they had disabled, repaired permissions etc., etc., and downloaded the Combo and ran it. All installed according to plan until it came to the second restart. L o n g spinning gear followed by a kernel panic. Restarted, kernel panic. Ditto. I'd been up since 5 am & it being late I wasn't thinking straight. so went straight for my clone and ran disk repair and Disk Warrior from it. No problem. Rebooted from the iBook. Kernel panic.
Think… think…
Oh yes, Safe Boot, of course! No Panic.
Anyway, long story short and this is already too long, I'd forgotten about installing DoubleCommand to remap the iBook's little 'enter' key. Took that out of startupitems, all ok.
I've put it back today after doing another disk repair via Safe Boot, (nothing reported) and restarted.
All still OK.
So to concur with Allan and others, an OS update installed over a modified system can, and in my case did, cause problems.
If it hadn't been for the knowledge that I have gleaned from these forums and other reading, I might otherwise have been amongst those crying "10.4.7 hosed my iBook!"
I'm happy to say that other than the above, self inflicted, problem everything else has been fine.
Happy days!
Adrian
iBook G4 1.07GHz, 30 GB, AE, 768mb; & iMac 17" 'igloo' G4:768mb 80 GB (10.3.9) Mac OS X (10.4.6) Belkin WiFi F5D7632, Epson C86, Shredder! Oh, and the iMac's got a droopy arm…

IPhone 4 update has killed my MacBook!

After updating my software two days ago, the administrator account on my 13" Aluminum MacBook has not worked. It works for 5-10 seconds after login and then totally freezes and doesn't recognise any change in status such as the removal of the power source or the plugin of my iPhone. I am positive that it was the update that caused this problem, as I have not updated the software on the other user account on my laptop, and that works perfectly fine.
Has anyone else had this problem, and if so, how can it be fixed?
I called Apple Support yesterday before I realised that my secondary account was still working, and we established that there was no problem with the hard drive, but we were unable to get into "safe mode". The only advice the tech could give me was to find my startup discs and take it to an Apple store and call back in.
Now that I have more information, and am able to actually use most of the computer, I'm starting to think there may be an easier solution?
Thanks!

I don't suppose you have access to another Mac?
Safe Mode failing to work could be a sign of more serious troubles.
Did you get to the login window for Safe Mode?
As for getting at your data, you may be able to enable the root account and work with your other files.
http://support.apple.com/kb/ht1528
I've never used root in OS X, but what you could do to save your data is login to the root account, then move the data from the broken user account to the Shared folder (this is within Macintosh HD>Users). Once you've moved the data you need to the Shared folder, log out of the root account and into the other working user. From there, you can move the data out of the Shared folder and into the new user account.
I'm not absolutely certain about my steps above, so let me know if you have troubles.
~Lyssa

IPhoto 9.1.5 update has killed iPhoto

After updating iPhoto 9.1.5, the app has become unresponsive, even after several restarts and crashes.
All folders have lost their "cover pic"
All photos have lost their edited versions (and seem to have reverted back to the originals)
All Faces seem to have been lost; iPhoto immediately spent an hour trying to reconstruct the faces -- and then promptly crashed.
When I look at the current and past versions of iPhoto in Time Machine, it shows all my pics and folders looking fine. But when I look at the same pics and folders in iPhoto, they are defective as described above.
Ideas?

I am a new mac user, and admittedly negligent about using the time machine to back up. (still learning my way around) I have a new macbook pro just purchased a few months ago. After I run the software update (Iphoto 11 9.1.5) last night, my Iphoto library rendered blank with "unreadable files, rebuilt library..." comment. So I follow the screen instruction and checked all the boxes. It wasn't a big library having just 4,700 photos and some movie files (from Iphone video) a total of about 2 hours worth. Long story short, the rebuilt was unsuccessful as it just spin with no progress after hours.
I see that all my photos/movies are still in the "package content". I downloaded the library manager since the rebuilt has failed. But the response was "unable to rebuilt from XXX..". (sorry I can't remember the exact phrase, but I have read similar response from other users experiencing the same problem from other posts).
Browse Backup in Iphoto came up empty.
All the events icons with titles are there, but no photos inside and no thumbs.
I gathered the only thing left to do is to manually rebuilt a new library. But I was wondering if there is another way around it?
Also, after the Iphoto issue, I found out the Imovie is not able to access the video files, and shuts down automatically within 60 seconds after I open up the program. Is the Imovie problem related to a seemingly damaged Iphoto Library?
I will get the proper back up system set up as soon possible. I have been very naive to think this sort of problem would not happen to a new mac so quickly.
Your feedback and suggestion is greatly appreciated.
If I have to rebuilt manually, what is the best way to go about it?

Update has killed phone and can't connect to restore

I have just run the latest update to v4.5.0.174 but the install failed and now the phone only displays an icon that looks like a dialog box with a circle, square and triangle in it, behind a circle with a line through it.
I now can't get Desktop Manager to connect to the phone so I can't try to reinstall or even downgrade.
How do I get my phone back?
Thanks
Stuart

Stuart, Greetings, and welcome to the BlackBerry.com Support Forums.
disconnect the BlackBerry from the USB and reboo the PC from off
try it all again now, see if the DM will recognize the BlackBerry.
if not, You will need to use JL_Cmder to wipe the device and subsequently load the OS to the device. Follow the instructions here:
http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
If JL_Cmder does not work, follow this instructional:
http://www.blackberryfaq.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

7.1 Update Has Killed My 9380 :(

Hi, my new 9380 arrived today and after initially setting it up, I plugged it in to the PC and the Desktop Manager asked me to upgrade to version 7.1, which I did. Everything was going fine until it came to "Erasing Applications" which it was stuck at for well over an hour until I eventually gave up and disconnected it, now it just gives me the red light of death (two red flashes) and refuses to turn on. I've tried everything suggested, using JLCmder to wipe it, downloaded the 7.0 OS again from Blackberry and used DM to try and install it to my phone but nothing works it always gets stuck at the beginning of "Erasing Applications". I've uninstalled the DM software and re-installed, re-booted my PC no end of times, used a different USB port, tried the install with the battery in, with the battery out, tried using AppLoader but that too gets stuck on Erasing Apps!!
I'm at my wits end with the bloody thing, my last 8520 lasted me two years without much incident and it seems this one's met it's grizzly end within it's first day, not a happy Blackberry bunny at the minute. Any help or advice would be greatly appreciated.

Sorted, seemed there was a problem using Windows 7 64-bit, tried installing it using my W7 32-bit laptop and managed to get OS 7.0 back on the phone, now to just do the 7.1 update again on it.

Itunes 7.4.1 update has killed my iTunes store & airTunes

I'm a bit stumped by this one. Yesterday I followed the prompt to update to iTunes 7.4. This morning when I came back to my computer my airTunes speakers weren't connected (first thing I noticed) and then I realised that the iTunes store won't connect either. The error message I get upon trying to connect is:
*iTunes could not connect to the iTunes Store. The network connection was refused.*
Now, I'm not stupid, so this to me sounds like a pretty obvious firewall issue. However the only firewall I have turned on is the standard Windows XP one and it has an exception for iTunes (and one for Bonjour). In fact I've ever tried turning that firewall off completely and it makes no difference. The error message comes up instantaneously, so it seems as if iTunes isn't even trying to connect to anything.
After noticing that iTunes 7.4.1 had been sneaked out overnight I wondered whether this was a known issue with 7.4.0, and updated. Sadly, it was to no avail.
Any ideas?

actually, scratch that - I fixed it.
Apparently ZoneAlarmPro was running hidden.

Flash Player 11 update has killed Flash for me in all browser/ web pages

Hi, I updated Flash player when prompted
Version: 11.9.900.117
Now no matter what browser all Flash media fails - most commonly (like on this very page at the top) I get the "Could not load Shockwave Flash"
I have uninstalled and reinstalled both Shockwave Flash player and I guess the regular Flash player. I have updated Java. In Chrome I have done the whole enable/ disable rigmarole in every permutation. In Firefox I have tried to fix the pluginn using their internal troubleshoot which says it failed.
What's the deal?
Windows 7

@ktulu - Unfortunately, not all problems are the same (as you noted with the different solutions not working for you.)
I run Chrome as my primary browser and haven't encountered any problems on Windows 7 and 8. We don't have any current widespread critical Chrome issues that I'm aware of.
Typically, you don't see Flash failing on all browsers, especially if you've tried Chrome, IE and Firefox. These all use a different technology (PPAPI, ActiveX, and NPAPI) so it's usually something else (virus/security software, etc) if all are failing.
In Chrome, can you navigate to the "about:flash" page and copy/paste the results in a forum reply?
It might also be helpful to get a screenshot of what you're seeing.
Please visit the link below for Instructions on capturing and posting screenshots or video In the forum.
http://forums.adobe.com/thread/1070933

ITunes update has killed my shuffle!!!

I did a software update today and installed the latest version of iTunes (8.0.1) and as soon as i plugged my shuffle in (2nd Gen, 1gb) iTunes said it was synced to another computer and i'd need to sync & erase so i could reload my shuffle.
No problem i thought as was just going to replace the playlist on it anyway.
It has now erased everything off my shuffle and is treating it like a brand new iPod.
Except when it asks me to name the iPod in the initial set up all i get is the spinning beach ball and iTunes fails to respond, leaving me having to force quit iTunes and having an iPod that's neither use nor ornament.
Any suggestions guys????

actually, scratch that - I fixed it.
Apparently ZoneAlarmPro was running hidden.

Ipod updater has killed both of my Mini's

I downloaded Apples updater and tried to update both of my Mini's. Now they are telling me to plug into a wall adaptor. I plug them into an APPLE wall adaptor and NOTHING! They don't recognize the adaptor. Is there a special cable or something that apple doesn't tell you about?
Windows XP Pro

Did you get a solution to this problem as it has just happened me. I keep getting the plug ipod into wall icon, cannot reset it, restore it. It's completely frozen on that icon,
Any help appreciated

BIOS update has killed my Satellite Pro A210-1AZ

Hi
Today Tempro gave me an alert that there was a new BIOS update (bios-20100215113621). I duly installed in in the usual way. During the restart the machine came up with a BAD CHECKSUM message.
Whilst I was reading the message the machine gave a high pitched sqeak and promptly died. It will not restart or respond.
Can Toshiba please explain why they are distributing killer updates and propose how to bring my machine back to life.
We have two indentical machines so will leave my wife's running on the old bios.
Any one got any good ideas?

Hi everyone,
Thanks for your suggestions and aplogies for my tardy reply. I think I've nailed the problem and am getting round it. I kept on trying to get the machine going and eventually it got as far as a windows screen sayig there was a windows problem. Windows sorted that out after a lot of grinding away and a restore. It was about then that I realised that MS were putting out a number of biggish updates. My wife's indentical laptop started its own MS update which involved a restart and a lengthy configuration routine. I think what happened was that unkown to me I was flashing my BIOS when MS Vista was updating itself too.
I now have a machnie that works. BUT! If I go into the BIOS after about 5 seconds I get a total machine shut down.
My plan is never to flash a BIOS again and cannot go into the BIOS.
Wifes PC seems to work perfectly OK on old BIOS, slow as ever but relaible.
Cheers
Fred

E63 Software Update has killed phone

Hello
My E63 wanted its software updating today, so I went through the process (backing up my contacts etc. first).
It said that the software update was successful, however when I went to restore the backup it failed. I tried again twice and each time it failed (I'm pretty sure it was during the settings part of the backup that it failed). My phone screen would then only show the time and that it was charging, with some white boxes flickering across the top.
I then reinstalled the phone software (the phone was working at this point, however obviously it behaved as if it had been through a complete system reset), and then attempted to restore the backup. It failed again and then the option to reinstall the phones software completely disappeared from my computer screen (I have a Windows 7 laptop, and my version of PC Suite says it is up to date).
Now, when I switch my phone on all I see is the hands image together with "Phone start-up failed. Contact the retailer." The phone is currently connected to my computer via USB, however it is not showing up in PC Suite or in My Computer.
This phone was bought second-hand for me as a gift, as such I only have the phone a charger and a USB cable (i.e. no software disks etc.).
Before this update attempt it was working fine, and I had no complaints.
Any help you can give me will be greatly appreciated.
Regards, Matthew

The Software Recovery Tool (SRT) is trying to recover a Windows 8 phone, and is not giving me an option to select a different operating system.
I press continue anyway, and it waits for a phone connection. It doesn't detect a connection (I have tried with the phone off, and with the phone on with the holding hands and "contact the retailer" sign showing).
Next it asks me to hold down the Power and Volume Down keys until the phone vibrates. I have done this by pressing the Power and Left/Down on the central pad (I tried them separately, as both of these can be used to control the volume I believe - the E63 doesn't have a dedicated volume control).
So far, with the Function key, Left central pad key and Power key pressed down the phone boots in to the main menu (office / media / settings etc.). I'm asked to "Select USB Mode", and so far I have only chosen PC Suite (I'm not sure if that is correct or not).
I've then hit OK on the SRT screen, however it still does not detect a connection, and takes me back to asking for the Power and Volume Down buttons to be pressed.
Once in the main menu on the phone I have also tried opening PC Suite on my computer, to see if that registers that the phone is there (it doesn't, despite going through the inital connection process).
When I exit out of the menu screen to the home screen, I can see the time the date and the fact that it's charging only. The calendar still opens from the relevant soft key, but contacts doesn't seem to (this may have something to do with the fact that I removed the SIM in case that was wiped during this process?).
In the Settings menu there is "General > Factory settings", however as I say the phone is second hand and I don't know the lock code (there is a very slim chance I may be able to get it - the previous owner never removed their emails - but it is as I say a slim chance).
...I hope that this helps you in some way?

Java Update has killed VNC Console from VM Manager 3.1

Similar Messages

Maybe you are looking for