Java upgrade and new Safari issues
Just upgraded Java (55) on my iMac and now can't swipe pages with my mouse in Safari? Anyone else having this issue?
Desktop ?
Check your settings in System Preferences > Mouse > More Gestures
or laptop ...
System Preferences > Trackpad
Similar Messages
-
I am running OS X, version 10.6.8 with safari 5.0.5. recently i ran one of those recommended upgrades and now Safari continually quits citing .WinASOEasyTweakVKey.Gen.tmp plug-in. how in the world do i combat this issue? thank you! I have reset Safari several times.
Another new problem is Firefox telling me, when the e-mail window is open, that the window must run in 32 bit. The window is then disabled and then i have to restart Firefox.
Thank You for any help/hope you can give me with these issues. deborahYou’ve been infected with the “Flashback” malware. See this Apple support document:
About Flashback malware
Back up all data, if you haven't already done so.
From the menu bar, select
▹ Software Update
to install the latest Java update, as well as any other available updates. That should clear the infection in most cases. You must update to the latest version of OS X 10.6 or 10.7 before you can install the Java update.
The removal tool runs automatically in the background and is then deleted. Don’t look for something to click. If the malware is removed, you’ll be notified.
After you’ve secured your system — not before — change every Internet password you have, starting with banking passwords, and check all financial accounts for unauthorized transactions. -
Hello, I'm using Mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts… I didn't have any problems with it before the upgrade and in safari I have no problem with it. please help me- I don't like to use safari a my browser...
elly903 wrote:
Before commenting - I CANNOT install Mavericks because it'll mess up the versions of Filemaker Pro and Quicken that I use regularly...
Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) for $15:
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
It will input your Quicken PPC data file directly if it was Quicken 2005 through 2007. If older you need Quicken 2006 or 2007 PPC first to convert your data file; and this update must be done BEFORE you upgrade to Mavericks:
http://quicken.intuit.com/support/help/patching/quicken-2006-manual-updates--mac -/GEN82200.html
Filemaker Pro PPC (in this case 7) running in Snow Leopard Server installed into Parallels for use in Lion, Mt. Lion and Mavericks:
[click on image to enlarge]
Snow Leopard Server: 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only)
This solution allows you to run your Photoshop Elements in Mavericks concurrently with Filemaker Pro PPC. Mavericks is a free download. -
Problems going to sleep after 10.5 upgrade and new memory
Looking around the forums I notice lots of problems with sleeping computers and Leopard. Here's my story.
After upgrading my eMac with new memory (now at 1 GB) and Leopard, I have problems getting it to go to sleep after logging out. What happens is at the logout/login screen I click the sleep button, it goes gray for seven or eight seconds or so, then goes active again and the computer stays awake. I have to click-and-wait three times before the computer will sleep. It is a consistent bug in that I always have to click three times.
I figure this is more likely a Leopard problem than a memory problem. I bought the RAM off eBay but they are name-brand chips and haven't given me any problem.
Any thoughts?Andy,
I would pull out to the new RAM upgrade and see if your sleep issue is hardware related. If your Mac still doesn't sleep correctly, I would try reloading OS X from your retail discs, then upgrade to 10.5.2 making sure you use the Combo Updater instead of Software Update.
Keith -
Error message installing Itunes and new Safari browser
Hi! I can't seem to download the newest version of ITunes. I've had it forever with no problems. I get error message 2738. I got the same error when I tried to download the new Safari Browser for Windows. I also got it when trying to uninstall Quicktime. I think that Vista is not cooperating with Apple. Anyone else having this issue? Any ideas?
Dell Dimension 8400 Windows Vistaeven though the following document refers to XP rather than Vista, it's worth a crack on a Vista box:
iTunes and QuickTime for Windows cannot be installed without Visual Basic Script (VBScript) -
In the past two weeks I have been documenting my Lion problems.
First, Arrows gone from finder windows; makes it difficult in comparing long lists of files in folder, or compare documents when reviewing line by line. This is obviously a change by people who do not compare long lists in windows comparing files between versions of projects ... the click to next screen is NOT equal to arrows.
Second, Finder Redreaw - doesn't. Move files to a fold, if there are a lot of files, they image of the files being moved remains in finder (see attached screen capture) until Finder is restarted and if COPY function is running. last files in Copy queue are not copied.
Screen capture 5 minutes after moving files to a folder - the selected file images are still in Finder after the move was completed.
Third, it is SLOW, particularly going to an "Attach file" in email, drawing the content of a folder to select an attachment is long enough for me to go to the kitchen, get a drink and come back. Just like the old days of OS7.
Fourth, shifting/recentering screen away from where I am working. Several programs, browsers, Adobe Photoshop/inDesign, and dear old Pages re center my screen - not to the center, but if I choose 30 of 70 images in a folder, it will shift … somewhere else in the folder instead of where I just clicked. If I am working on a document in inDesign or PhotoShop it will do the same - the cursor and screen drift elsewhere to find something it has been amused by. Sometimes it is a word, or a file, but often it is off the pastboard and on the etherial pasteboard on which the pages sit. Or if I'm zoomed in on an image, it moves to somewhere else.
I use a mouse and keyboard, both Apple wireless. I do not use a trackpad, but have a tablet/stylus I am afraid to put into the mix until this crap is stopped.
Fifth, SAVE AS… is gone. You must unlock, duplicate and edit the duplicate … and must rename it in Finder, or use EXPORT to save as the same format under a new name. SAVE AS… worked. Not broke, why fix it?
Personal Comment: The problems seem to be the triumph of coked up software engineers ooohing and aaahing over "Wouldn't it be cool if..." Cool, if they were Microsoft, and required everyone change how they have worked on Macs for the past (almost) three decades. Triumph of brainstorming over functionality.
Sixth, I can't use Cocoa Booklet, but that really started in OSX 10.6 "Snow Leopard". Most of my X11/Cocoa programs stopped worked about that time. Apple is no longer supporting "open source"?
But Wait! There's More...
Seventh, Tonight, trying to download a 1.7 gig archive onto a disk where 280 Gigs were supposedly free, it would not download because, according to the wonderful new Safari and the wonderful new Lion, there is not enough disk space to download a 1.7 gig file in a mere 280 Gigs of free space.
I might be able to move Snow Leopard onto the iMac, but my deciding factor was that Apple, in its wisdom, decided to make iBook Author unable to run under Snow Leopard. So moving to Snow Leopard means I have lost the ONLY benefit I get from the new computer and the new system.
This really stinks.bigbookjoe wrote:
In the past two weeks I have been documenting my Lion problems.
First, Arrows gone from finder windows; makes it difficult in comparing long lists of files in folder, or compare documents when reviewing line by line. This is obviously a change by people who do not compare long lists in windows comparing files between versions of projects ... the click to next screen is NOT equal to arrows.
Second, Finder Redreaw - doesn't. Move files to a fold, if there are a lot of files, they image of the files being moved remains in finder (see attached screen capture) until Finder is restarted and if COPY function is running. last files in Copy queue are not copied.
Screen capture 5 minutes after moving files to a folder - the selected file images are still in Finder after the move was completed.
Third, it is SLOW, particularly going to an "Attach file" in email, drawing the content of a folder to select an attachment is long enough for me to go to the kitchen, get a drink and come back. Just like the old days of OS7.
Fourth, shifting/recentering screen away from where I am working. Several programs, browsers, Adobe Photoshop/inDesign, and dear old Pages re center my screen - not to the center, but if I choose 30 of 70 images in a folder, it will shift … somewhere else in the folder instead of where I just clicked. If I am working on a document in inDesign or PhotoShop it will do the same - the cursor and screen drift elsewhere to find something it has been amused by. Sometimes it is a word, or a file, but often it is off the pastboard and on the etherial pasteboard on which the pages sit. Or if I'm zoomed in on an image, it moves to somewhere else.
I use a mouse and keyboard, both Apple wireless. I do not use a trackpad, but have a tablet/stylus I am afraid to put into the mix until this crap is stopped.
Fifth, SAVE AS… is gone. You must unlock, duplicate and edit the duplicate … and must rename it in Finder, or use EXPORT to save as the same format under a new name. SAVE AS… worked. Not broke, why fix it?
Personal Comment: The problems seem to be the triumph of coked up software engineers ooohing and aaahing over "Wouldn't it be cool if..." Cool, if they were Microsoft, and required everyone change how they have worked on Macs for the past (almost) three decades. Triumph of brainstorming over functionality.
Sixth, I can't use Cocoa Booklet, but that really started in OSX 10.6 "Snow Leopard". Most of my X11/Cocoa programs stopped worked about that time. Apple is no longer supporting "open source"?
But Wait! There's More...
Seventh, Tonight, trying to download a 1.7 gig archive onto a disk where 280 Gigs were supposedly free, it would not download because, according to the wonderful new Safari and the wonderful new Lion, there is not enough disk space to download a 1.7 gig file in a mere 280 Gigs of free space.
I might be able to move Snow Leopard onto the iMac, but my deciding factor was that Apple, in its wisdom, decided to make iBook Author unable to run under Snow Leopard. So moving to Snow Leopard means I have lost the ONLY benefit I get from the new computer and the new system.
This really stinks.
http://www.apple.com/feedback/macosx.html -
OSX Upgrade and new software purchases slow down Mac and Battery won't hold charge?
Any assistance appreciated:
I have recently upgraded my OSX from Snow Leopard, which I was quite happy with, and was ticking over very nicely.
And, today, I have problems???
I was using Snow Leopard, I purchased Mainstage 2 for my musical work... Nice piece of Kit..
I then notice 'Apple', bring out Mainstage 3 about 10 days later???
I check out the spec, will not run on my OSX...
I then check out Mainstage 3 and find that it would be a better version than 2..
I then decide that the extra stuff in Mainstage 3 is worth the price of an OSX upgrade, and the newer Mainstage 3 version although I had recently purchased Ver 2..
I do the upgrade, seems to have worked fine...
I purchase Mainstage 3, get that installed, and the Xtra's.... What is that all about?
It took me well over 12 hrs to get those...
Any road up, I get everything installed and functioning....
Now, my Mac is Slllooooow..
The Battery will not hold it's charge... Runs for only 2 hours MAX and then needs recharging???
The MacBook was bought only 18 month ago??? 2011 edition..
I have an IBM ThinkPad 240 and it still holds more charge than my Mac....
Help appreciated Folks...
For the dosh I have paid to 'Apple', the product and software should operate and function better than this???
And to honest, I aint spending anymore, until 'Apple' give me some answers on my problems.
Peace, Love n Laughter Cap Reg
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro8,2
Processor Name: Intel Core i7
Processor Speed: 2 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 4 GB
Boot ROM Version: MBP81.0047.B27
SMC Version (system): 1.69f4
Serial Number (system): C02FTCRGDF8V
Hardware UUID: 0F156058-FA74-5CAC-971A-3F42A7685015
Sudden Motion Sensor:
State: Enabled
System Software Overview:
System Version: OS X 10.8.4 (12E55)
Kernel Version: Darwin 12.4.0
Boot Volume: Macintosh HD
Boot Mode: Normal
Computer Name: Reggie RaReBreed’s MacBook Pro
User Name: Reggie RaReBreed (reggierarebreed)
Secure Virtual Memory: Enabled
Time since boot: 4:13
Battery Information:
Model Information:
Serial Number: D86115600VLDGDLAM
Manufacturer: SMP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 406
Hardware Revision: 2
Cell Revision: 158
Charge Information:
Charge Remaining (mAh): 6286
Fully Charged: Yes
Charging: No
Full Charge Capacity (mAh): 6465
Health Information:
Cycle Count: 142
Condition: Normal
Battery Installed: Yes
Amperage (mA): -1032
Voltage (mV): 12295
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 60
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
GPUSwitch: 2
PrioritizeNetworkReachabilityOverSleep: 0
Standby Delay: 4200
Standby Enabled: 0
Battery Power:
System Sleep Timer (Minutes): 60
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 60
Wake on AC Change: No
Wake on Clamshell Open: Yes
Display Sleep Uses Dim: Yes
GPUSwitch: 2
Reduce Brightness: Yes
Standby Delay: 4200
Standby Enabled: 0
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 85
Revision: 0x0000
Family: 0x0085
Serial Number: 0x000b8719
Charging: No*Hopefully these shots will make it obvious...*
Uploaded with ImageShack.us -
Java upgrade - Bad news for gamers?
I apologize if this is in the wrong forum. Please feel free to move it. Thanks. Thought I'd come here for help and see if any of you smart people have any ideas
Runescape was working fine under Tiger. When I upgraded to Leopard, the Java updated too and now game is distorted. Makes it so I have to resort to the Acer PC for gaming. *sad face*
Here's how it looks now:
And from before:
My computer details:
Model Name:eMac
Model Identifier: PowerMac4,4
Processor Name:PowerPC G4 (3.3)
Processor Speed:1 GHz
Ran Java tester and it says: Java version: 1.5.0_28 from Apple Computer.
Any ideas for this noob?
If you wanna try it yourself, the link is Runescape
Thanks bunchesI guess I got my answer. Thanks for checking
Message was edited by: FrptPretzels -
Win 10 Upgrade and Power Manangement Issues
I have an S230u Twist. After upgrading to Win 10 I have the following outstanding issues: The most problematic is that after the upgrade I have an issue with the unit going to sleep. Upon waking, the screen brightness resets to about 5%. It doesn't do this all the time but often enough be irritating. I've turned off adaptive brightness but this doesn't help. I've run System File Checker which made some fixes to corrupt files and this helped somewhat. Lenovo Solutions Center reports that the Power Management Software is not installed even though I 've upgraded the Power Management driver with the Win 10 version. I'm at a loss to know what to check next to fix this. The other issue concers the start menu - the "Most Used" doesn't seem to update with the Most Used programs I use (most which are on the Task Bar). Any support I can get on the Power Management issue would be most appreciated.
I spent more hours trying to resolve. Down loaded driver 355.60 Win 10 64 bit (355.60-notebook-win10-64bit-international-whql)Uninstalled current driver and software via device manager.Expanded the driver and ran setup. Performed a custom install without GF Experience. Install went through fine and rebooted after removing software.Came back up and continued install and completed with no errors. Ran device driver and confirmed driver installed. Set GoogleEarth to run with graphics processor.Everything seemed okay.Set desktop to include in notification tray and Display GPU Activity so I could see that GE was running in processorThen launched GE with 3 buidings and citties. Ran site seeing tour.Crashed after a couple of minutes with System_thread_exception_not_handled and rebooted. When it came back up I turned of to show in notification tray and turned off GPU activity.Re-Ran GE and it lasted a bit longer and then crashed with the same errorSystem_thread_exception_not_handled and rebooted. Would welcome any further help.
-
CRM2007 upgrade and IC webclient issue.
Hi all,
We have successfully upgraded from crm4.0 to 2007 last weekend.
However when I launch IC Webclient, it is blank. Is there something that I missed?
Also, I have applied note 1144511, still same issue.
Regards,
KG
Edited by: KG on Mar 17, 2008 7:06 PMHi KG,
May I know how you started the IC webclient in CRM 2007?
Are you using crm_ic transaction?
For CRM 2007, different steps have to be used.
For CRM 2007, you might have to use transaction
bsp_wd_cmpwb and component = crm_ui_frame to test.
This will start the new WEB UI with a user id has business role related to IC Webclient. The standard role is IC_AGENT.
You may have to assign it in ppoma_crm for the position using the same step as you assign a ic webclient profile, but instead, you need to assign a business role = IC_AGENT.
Hope these could do help!
Hongyan -
TS3899 ios 6 upgrade and yahoo mail issues.
I upgraded to ios 6 and now I am unable to log into yahoo maii from my iPad or iPhone. Any one have any suggestions?
I am having the same issue. However, I am accessing Yahoo! email via Safari and it still automatically logs me out when I use my iPhone.
-
2008 Upgrade vs New Build Issue
I have two servers - Both HP's. One crashed and we rebuilt the system as a Windows 2008 Standard 32bit. Another system was a 2003 Standard 32bit and we performed a system upgrade to Windows 2008 Standard 32bit. Both servers are running with the latest updates
and service packs. The new build is working exactly as expected. The Upgrade is having issues. We are finding things that did not carry over in the upgrade process (Group Policy Management not installed, some AD changes, drivers, etc) but
the process is tedious fraught with potential misses/error.
I would really like to export a complete system report from both servers and compare the results to try and find other items the upgrade failed to process correctly.
After much reading, powershell was a consistent theme but I could not get it working in 32bit environment.
Does anyone have a recommendation for how to complete this? Third party software or internal reporting we can use?
Not a server guy so please be gentle if this is an easy question.
Thanks in advance for your help.
DouglasHello,
which server roles are you talking about in detail on each hardware?
Are both machines DCs? If yes in-place upgrades are not a good idea for DCs, every admin will suggest against it, even it is full supported from Microsoft. Instead of looking for what is going wrong with comparing the 2 machines, you should think
about using the support tools for DCs and check the output or let us here have a look into the files.
ipconfig /all >c:\ipconfig.log [from each DC/DNS Server]
dcdiag /v /c /d /e /s:dcname >c:\dcdiag.log
repadmin /showrepl dc* /verbose /all /intersite >c:\repl.log ["dc* is a place holder for the starting name of the DCs if they all begin the same (if more then one DC exists)]
dnslint /ad /s "DCipaddress" (http://support.microsoft.com/kb/321045)
ADREPLSTATUS
http://www.microsoft.com/en-us/download/details.aspx?id=30005 can also be exported to file.
As the output will become large, DON'T post them into the thread, please use Windows OneDrive (https://onedrive.live.com) [with open access!]
and add the link from it here. Also the /e in dcdiag scans the complete forest, so better run it on COB.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter: -
MODERATOR: All points have been UNASSIGNED and the thread LOCKED. Do not share email addresses on these forums. If you have some information, please consider posting it to the [Wiki|https://wiki.sdn.sap.com/wiki/display/ERPFI/Home] rather than sharing via email. Than you for your assistance.
Hello Gurus,
Please help me out by providing documentation and blue print for below mentioned itmes.
1. We are currently upgrading from 4.7 to ECC 6.0. Can anybody send me a link or a blueprint for FICO in ECC 6.0 and the delta functionalities between the two.
2. Configuration document for NEW GL.
thank you so much for your help.
Please send me the documents to below id
[email protected]
Thanks,
KumarHi,
Please help me out by providing documentation and blue print for below mentioned itmes.
1. We are currently upgrading from 4.7 to ECC 6.0. Can anybody send me a link or a blueprint for FICO in ECC 6.0 and the delta functionalities between the two.
2. Configuration document for NEW GL.
Please send me the documents to below id
[email protected]
Regards
R.manigandan -
Exchange SP2 to SP3 RU7 upgrade and any know issues with the Dialogic Gateways
We are planning on upgrading out Exchange servers from SP2 to SP3 RU7. We are currently using an Avaya phone system and have Dialgoc gate2ways between these systems to allow us to get the voice mail into the end user's mailbox as a wav file. We are using
the DMG2120's with code many years old. Has anyone had any issues or know of anyone that has had issues?Hi,
I have checked the your question from our internal channel and did not find any related compatibility issues with the update. I also check the third-party forum but still cannot find any threads about any potential issues.
I think we can feel free to do the upgrade. If you would like to double confirm the question, you can also ask a question in Dialogic forum for more help:
http://www.dialogic.com/den/developer_forums/f/default.aspx
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
Additionally, there is an article about the IP gateway partners, AudioCodes and Dialogic, to add to the list of PBXs that are tested
by Microsoft currently:
http://technet.microsoft.com/en-us/library/ee681657(v=exchg.141).aspx
Regards,
Winnie Liang
TechNet Community Support -
Tiger upgrade and/or Safari 1.1 export G4 iMac
I'm trying to upgrade my G4 iMac with SuperDrive to Tiger from 10.3.
When I get to the part about "verifying destination volume", it says there is an error and I should restart. Did that. Twice.
Then I tried doing a archive and install. Same result. My next move would be to do a clean install, but I would lose my Safari 1.1 bookmarks.
If someone knows how to export the bookmarks or how to get thru an archive & install, I'd appreciate the info.
thanks,
bobbieHello need411 and Welcome to Apple Discussions.
Boot from the Tiger DVD then, before you commence the install, go up to the menus (I forget the exact name of it but it's the most right hand menu from the left side of the screen if that makes sense). From there choose Disk Utility.
Click on Macintosh HD on the left hand side and then select Repair Disk. It's also worth Repairing Permissions.
Hopefully after that the 'destination volume' should be okay...
mrtotes
P.S. Safari Boomarks are in the file:
Macintosh HD > Users > <yourname> > Library > Safari > bookmarks.plist
Maybe you are looking for
-
Problem with javascript confirm() in a JSP
I'm trying to use a confirm() box in a jsp. I've looked at tons of examples and I still have the same problem. If I just add this to my page the prompt will pop up as expected: (of course it doesn't really do anything.)<SCRIPT LANGUAGE="JavaScript">
-
Can I create pdf files from Outlook 2003 messages with Acrobat XI Standard?
Can I create pdf files from Outlook 2003 messages with Acrobat XI Standard?
-
How to create a materialized view on a subqueried view
Hi, I have a view with subquery. This view is accessed by users frequently. I want to improve its performance by materialiezed view technology. Unfortunately, my view includes a subquery. does anyone have an idea how to create a materialiezed view on
-
Microsoft Intune Client Software Installation in Windows Server
Intune Client Softwrae is being installed in client PCs, but can anyone tell me that Microsoft Intune's Client Software can be installed in any ver. of Windows Server? If not then how to install Intune Client Software?
-
What are the foreign security certificates for?
I see a lot of foreign security certificates stored for FireFox. What are these and can I delete them? Some are from Taiwan, China, Turkey and Spanish countries.