Java with Card Management Software

hi every one
i need java interface for card management software like (EDIsecure CMS or IDExpert CMS)
please any help me is there any java interface for the CMS.
in my java application while clicking the print button i need to sent the user information to CMS software.
i already design the template for my card.
then this card management Software apply data value to the template then it will print it.
Thiagu.m

Note: This thread was originally posted in the [Blades - General Discussion|http://forums.sun.com/forum.jspa?forumID=908] forum, but moved to this forum for closer topic alignment.
I had no better idea to where to move that thread.

Similar Messages

Creative Suite CS4: Problems with font managing software

It seems that there are some issues of the applications of the creative suite CS4 with the font managing software MainType (http://www.high-logic.com/maintype.html).
With standard settings, CS4 no longer recognizes PostScript Type 1 Fonts loaded by MainType (which did not occur with CS3 and older versions). The only solution so far is this workaround: Within MainType enable under "Tools -> Options" the option "Copy Type 1 Postscript fonts to Windows fonts folder" and CS4 will load these fonts again.
This seems to be a bug of CS4. Are there problems with other font managing programs?
regards
fabian

After reading tons of forums about this issue, it does seem to be an issue with CS4 not recognizing fonts the way that CS3 did. Wish they had mentioned that little feature when they released it. They even go as far as to say they do not support certain programs for type handling in Windows. Copying them to the system folder is a workaround, but it is not available easily in programs like Extensis' Suitcase, which is long overdue an upgrade. LinoType beta tested a new application for Windows, but when I sent an email to them asking about the release date for the their final version, their ignorant customer support sent me a link to their website pointing out that it is not yet available, and not answering my initial question of when.
I don't entirely blame Adobe, it seems as though a lot of companies have dropped the ball on this issue, and since many people have Type 1 fonts they've been using for years, they will have to repurchase (if available) those fonts in the newer OTF format which everyone seems to support. OTF is a much nicer format and more portable cross-platform, but it's simply inconvenient to not be able to use all of your fonts at your own discretion easily. I'm not sure what the big deal was with not including support for Type 1 fonts, unless that's most of the reason that the Adobe apps were crashing before... corrupt versions of the fonts they talked us into purchasing, etc... Adobe used to make ATM for managing postscript fonts, but it doesn't work on Vista to my knowledge. It would be nice if they would recommend a font manager other than the Windows system folder.
I figure Adobe was hoping that it would not be a major issue since their wonderful PDF format has taken hold for printing. Print shops do not have to install fonts before printing a piece anymore. Most people will read in these forums about the loss of support, throw up their hands and shake their heads, but do nothing about it. After all they too probably purchased the CS4 suite without knowing about this issue and have already spent their money. It doesn't look as though it's an issue on the Mac, but by the time you throw $3000 at an entry level Mac workstation and $1600 at the basic adobe apps, that's not a solution either. Especially when you have to go out and buy all new fonts anyhow, since the macs will not support the Windows postscript typeface formats either.
After doing a little price shopping for typefaces, I'm trying to try to keep using the few OTF and TTF fonts I've purchased since they're still working, since the prices of fonts these days are astronomical. I've installed a few fonts in the system folder, but too many and Acrobat distiller crashes. It's not cost effective to spend all of your income from design on $1600 font family sets, just to make changes to a document where you might have used a postscript face. Especially in this economy... It's another case of the investor getting rewarded for the release of an application and the customer is left holding the bag. Hopefully it's a bug, but not likely. It's probably some mandated decision by the higher ups in Adobe.
I'm sure larger companies with hundreds of employees probably have site licenses for typefaces in the OTF format, so for them it's not a problem, and since most people using PCs to do design opted for that platform because of the cost issue, Adobe probably doesn't care about them either. Maybe a solution will arise in the future, but it doesn't look likely. You will probably have to get the new formats of typefaces one by one.

GT60 issue with keyboard manager software after Windows Update

After a recent Windows update, I've started to get an annoying pop-up when I boot my GT60-0NE. The box says: "Microstar SCM service is stopped!!!" I then have to click OK and immediately get a UAC pop-up asking for permission to run Msiservice.exe which I also have to approve. Finally after clicking OK twice my keyboard will light up. This is Windows 7 64-bit running S-Bar 2.0 (Ver 4.5) and Keyboard LED Manager v1.0.1112.1901
Anyone else seeing this? Could it possibly be related to IE10? I tried disabling UAC but that only got rid of the second pop-up. Still got the SCM service stopped error. Thing is, when you check services it is in fact running not stopped.
Edit: Uninstalled IE10 and the problem went away. If anyone from MSI reads this please take note that either S-Bar and/or KLM have issues running on Windows 7 systems with IE10 installed.

Quote from: Svet on 03-April-13, 20:19:50
you can report this to msi at >>How to contact MSI.<<
Thanks. Did that last night. They said they would inform their software team.

SAP MMC Java with Solution Manager

Dear experts,
i have installed a SAP Solution Manager 7.0 in WAS ABAP + JAVA in Windows Server 2003 SR2 Enterprise Edition 64 bits + MS SQL 2005.
I try to connect to the SAP MMC in Java (http://localhost:52113/) but i have a message error:
Your browser is completely ignoring the <APPLET> tag!
I already installed the jdk for SAP and x64 (J2sdk version 1.4.2.17 version x64) on http://java.sun.com/j2se/1.4.2/SAPsite/download.html
How can i access?
Thank you in advance
Best regards.
Pascal.

Hello,
i found my error: i have installed a jdk but didn't a jre...
Sorry for this thread.
Thank you.
Pascal.

Integration with ticket management software

I have been asked to look into integrating my company's ticket management system with Project Server to provide a quick way to update a resource's activity on a project. (eg: Technician logs hours in the ticket management system, then presses a button
and it updates a corresponding project/task). I have had difficulty finding documentation on the API to see how this could be executed. Does anyone have some insight into this, and could you point me in the right direction?
I tried poking around [ http://msdn.microsoft.com/en-us/library/office/ee758031%28v=office.14%29.aspx ] but didn't catch what I was looking for, though that is very possibly an oversight.

That sounds very similar to the TFS connector available on MSDN Ultimate.
Basically, you'll have to write code against the PSI that plugs in actual hours against a task - which should be referenced in the downloadable SDK.
Alternately, you could look at third party tools like HMS TimeControl which provide a front end timesheet that then pushes back into Project Server and/or the ticketing system. (Mentioned as another architectural option.)
Andrew Lavinsky [MVP] Blog: http://azlav.umtblog.com Twitter: @alavinsky

Keys for the authentication with Card Manager.

Hi!
I got a problem with authentication with CM (JCOP Tools) sending init-update command.
I already have 2 cards blocked.
I use KMC key. Is it wrong?
Maybe sombody can tell me, which keys i must use?
Thanks.

You have only one key that you call KMC right ?
It may be possible that the keys stored in the CM are diversified using your KMC.
I know 2 method used for diversification according to Visa specs. These
diversifications are called Visa CPG 1.0 and Visa CPG 2.0 (Visa CPG stands for
Visa Card Production Guide). These diversification methods are using the card
CPLC data.
Unfortunately these diversification methods are not public.Then I can't discribe
them in this forum.
You may check with Visa people to get these two specifications.
Mainly if JCOP Tool is answering this error after an Init Update, it means that JCOP Tool was not able to verify the card cryptogram. Then that the keys set
in the tool are not corresponding with the ones personalised in the CM.
Thomas
http://jaccal.sourceforge.net/

Memory Card Manager Buttinski

Every time I add a song to, or delete a song from my Shuffle, I get a message from the "Memory Card Manager" that says "Failed to locate supported file types or there are no photos found on this device." Everything works, mind you, but that noise and announcement each time is mighty annoying. Any suggestions?

Mark, I am having the same issue, as my (just bought a few days ago) 4GB Nano is being recognized by my Dell Memory card manager as a memory card, and indicating "Failed to locate supported file types as there no photos found on the device." Same thing occurs whenever I disconnect and reconnect to the USB cable. I have already had my iPod Nano restored at the Apple Store, and have downloaded the newest 6.0.5 iTunes and 1.1.2 iPod software, so I should be good to go. I should also tell you that I have tested all the USB ports, and they are fine. iPod also runs ok on my other Dell Desktop computer, which isn't running with the same Dell Memory Card Manager software (Dell 964 Printer). Are there a portion of the Dell software related to the memory card functions only, or do I have to uninstall the entire software? How will that effect functionality of my 4 in 1 Dell printer? Thanks!
Dell Desktop 8300 Windows XP Pro
Dell Desktop 8300 Windows XP Pro
Dell Desktop 8300 Windows XP Pro
Dell Desktop 8300 Windows XP Pro

Donwload Oracle with download manager

Dear All,
Does any one to help me ,how to download oracle database with download manager software such as DAP or FDM, I'd been trying several time but doesn't work.
thank you

Are you getting any errors with these managers?

Compression with Java/Smart Cards

I am a Software Development Student. I am currently researching the area of data ZIP compression in conjunction with Java/Smart cards. Just wondering if anyone has come across a similar project and if so where?
Thanks.

We can't deal with real compression, as you known the jcvm is composed of the converter and the jcre
the compression is related to the converter.jar
There are many ways to produce compressed code compared to an original not optimisez code.
Real comresion is not really possible on a such support, the processor is not enought fast. In my mind, the only compression possible can be the rle. Not very brilliant if it is not used for images...
(sorry for my english writting...)

Unable to access to GemXpresso Card Manager with JCOP 312 pluggin

Hello all,
I´m using JCOP 312 to install applets in GemXpresso 211 cards but I´m not able to achieve it. Before I achieved to install applets with JCOP 312 in JCOP 211 cards without problems. I read in others threads of this forum that it´s possible to install applets in GemXpresso cards with JCOP using com.ibm.jc.GX211CardManager class in JCOP configuration in addition to change Card Manager AID.
I don´t have the com.ibm.jc.GX211CardManager class so I can´t test this issue. does anyone have this class? I woul´d very appreciated if anyone could pass me this class.
I don´t know no other form to use GemXpresso cards with JCOP 312 eclipse pluggin.
Thanks in advance.

Yes Safarmer, this is the point, "to determine what these setting are" :-). I know to configure JCOP plugin parameters in accordance with javacard type,
but the problem is find out values of these parameters (AID Card Manager, key values,...).
Steps I do to test JCOP cards are depicted below:
/card -a a000000003000000 -c com.ibm.jc.CardManagerresetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B 66 00 FF 4A 43 4F 50 32 30 ;f..JCOP20
ATR: T=0, N=-1, Hist="JCOP20"
=> 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
(92851 usec)
<= 6F 19 84 08 A0 00 00 00 03 00 00 00 A5 0D 9F 6E o..............n
06 40 51 30 23 20 17 9F 65 01 FF 90 00 [.@Q0|mailto:.@Q0]# ..e....
Status: No Error
cm> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
cm> init-update 255
=> 80 50 00 00 08 FA 65 9D CE FA 89 4B BC 00 .P....e....K..
(116982 usec)
<= 00 00 61 73 02 05 76 90 99 52 FF 01 0D A4 66 E3 ..as..v..R....f.
7F D6 2E 15 C5 D3 3D 2A C0 69 98 AE 90 00 ......=*.i....
Status: No Error
As you see, there isn´t any problem to access to this card with JCOP.
Steps I do to test GemXpresso cards are depicted below:
/card -a a000000003000000 -c com.ibm.jc.CardManagerATR: 3F6D000080318065B00501025E83009000
ATR: T=0, N=0, Hist=80318065B00501025E83009000
jcshell: Unable to select Card Manager or invalid FCI: Unknown Global Platform Java Card.
Subsequent commands might fail! Inspection might not be possible!
??> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
??> init-update 255
jcshell: Error code: -5 (Authentication failed)
jcshell: Wrong response APDU: 434D03070001297400BD0D019EED3933FC1384F99315DD3552508A529000
Unexpected error; aborting execution
As you see, there are problems to access to this card with GemXpresso card, basically it´s not be able to select Card Manager.
I know I should to change AID Card Manager and Card Manager class to this: "/card -a A000000018434D - c com.ibm.jc.GX211CardManager" but the point is
I don´t have GX211CardManager class. Moreover I don´t know values of the keys to use with this cards type.
Regards.

Cryptographic operations with the Card Manager

Hello,
I'm new to smart card programming and could need a little help.
Here is what I'm trying to do:
First off, I don't want to develop a java applet, I want to use the functionality of the Card Manager (Issuer Security Domain) only. With the ISD, I'm trying to put a cryptographic key (e.g. RSA key pair) on the card and read it back afterwards. Is this generally possible?
Also, can you do cryptographic operations (e.g. RSA signing) using only the ISD?
It would help me a lot if somebody could give me some hints and, if it's possible, the sequence of APDU commands I have to send to the card.
Thank you.

misfire wrote:
Hello,Hello.
I'm new to smart card programming and could need a little help.
Here is what I'm trying to do:
First off, I don't want to develop a java applet, I want to use the functionality of the Card Manager (Issuer Security Domain) only. With the ISD, I'm trying to put a cryptographic key (e.g. RSA key pair) on the card and read it back afterwards. Is this generally possible?ISD has cryptographic capabilities. It is limited to secure channel protocol handling. DES for SCP02 and RSA for SCP10 plus RSA for DAP (data authentication pattern). You do not have the possibility to use it for something else. What you can do though is access the DES/RSA part of the ISD via an applet (GP API) to e.g. decrypt and encrypt data.
Also, can you do cryptographic operations (e.g. RSA signing) using only the ISD?Yes, but only via an applet.
It would help me a lot if somebody could give me some hints and, if it's possible, the sequence of APDU commands I have to send to the card.Check out the GP specifications: SCP02/GP API in GP2.1.1 and SCP10/GP API in GP2.2 .

Java Card Manager NetBeans plug-in

Just to announce, I've uploaded a simple plug-in for NetBeans that provides basic functionality for Java Cards. Send APDU commands to card or simulator, browse content loaded on card, load & install & delete applets, open secure channel... Plug-in follows Open platform specification.
It has been used with GemXpresso cards (and works well) so there is no experience with other cards, but suppose that the card is OP compliant, it should work ok.
I have some ideas to improve and to extend it to support full OP/GP specs as well as plug-in for Java Card project type. However, I have no idea about what Sun prepares as tools with JC3.0 (I've noticed that it will be NB plug-ins too).
http://plugins.netbeans.org/PluginPortal/faces/PluginDetailPage.jsp?pluginid=10935

Hello, neinaggar1.
Well, on NetBeans plug-in portal, I've uploaded Java Card Manager plug-in. This plug-in brings to NetBeans the possibility to communicate (APDU commands, installing applets, etc.) with card or running simulator; no project types.
In comments on plug-in discussion, i.e. http://plugins.netbeans.org/PluginPortal/faces/PluginDetailPage.jsp?pluginid=10935 , I've put a link to second plug-in Java Card Project that provides the "project" functionality - new project type (new project type category "Java Card"), code completion, compiling, converting, starting simulator... However, this plug-in is in "beta" stage because it has some unsolved pitfalls - for example, you can provide just one export path for converting and there is a problem with plug-in depedency to internal NetBeans modules so it is strongly dependent on certain ide version (and probably even on its build).
Check the link above and discussion present there.
Just a note:
the access to the functionality Java Card Manager plug-in is from "Service" tab.
the access to the functionality Java Card Project plug-in is from properties (right click on the project name in project treeview) of existing java card project made by this plug-in or via new project wizard to make a new java card project.
Edited by: Vlasakcz on Aug 1, 2008 7:24 AM

Is there a Java utility class to help with data management in a desktop UI?

Is there a Java utility class to help with data management in a desktop UI?
I am writing a UI to configure a network device that will be connected to the serial port of the computer while it is being configured. There is no web server or database for my application. The UI has a large number of fields (50+) spread across 16 tabs. I will write the UI in Java FX. It should run inside the browser when launched, and issue commands to the network device through the serial port. A UI has several input fields spread across tabs and one single Submit button. If a field is edited, and the submit button clicked, it issues a command and sends the new datum to the device, retrieves current value and any errors. so if input field has bad data, it is indicated for example, the field has a red border.
Is there a standard design pattern or Java utility class to accomplish the frequently encountered, 'generic' parts of this scenario? lazy loading, submitting only what fields changed, displaying what fields have errors etc. (I dont want to reinvent the wheel if it is already there). Otherwise I can write such a class and share it back here if it is useful.
someone recommended JGoodies Bindings for Swing - will this work well and in FX?

Many thanks for the reply.
In the servlet create an Arraylist and in th efor
loop put the insances of the csqabean in this
ArrayList. Exit the for loop and then add the
ArrayList as an attribute to the session.I am making the use of Vector and did the same thing as u mentioned.I am using scriplets...
>
In the jsp retrieve the array list from the session
and in a for loop step through the ArrayList
retrieving each CourseSectionQABean and displaying.
You can do this in a scriptlet but should also check
out the jstl tags.I am able to remove this problem.Thanks again for the suggestion.
AS

My Extensis suitcase 11.0.4 is no longer working with my system OSX10.6.8, what is the best and cheapest font management software to use that's compatible with this system and CS software

my Extensis suitcaseX 11.0.4 is no longer working with my system OSX10.6.8, what is the best and cheapest font management software to use that's compatible with this system and my existing CS design software?

If you upgraded to Snow Leopard, then it would seem that Suitcase 11 is not compatible with Snow Leopard and you'd need to buy Suitcase Fusion 3 for $99.95.

SAP NW 7.4 as java system sync with solution manager system 7.1 issue

Dear all,
I have installed SAP NW 7.4 system SP level is SP5 ,after that i have cheked in service marlket palce Now service market plkace latest SP level SP7.
For manula downlowd( directly from service market place) is difficult for java system and i have started sysnc with solution manager system to download patches through MOPZ.
Below are the activities completed:
1) Through template installed I have rgeisterd the system into Solman SLD.
2) Sync completed succfully exact product version is shwoing in solman SLD
3) after that I have checked in SMSY and LMDB its showing prefectly
4) But in SMSY its shwoing only under technical system,not showing product systems
5) I have assigned in product system in LMDB
Now the issues while selecting the system group and logical componensts I have created one logical componnets -but in that SAP NW 7.4 is not showing and I have assumed SAP NW 7.3 EHP1 after creating my newly create dsystem is not shwoing in drop down.
I ma getting belwo error.
No system found for this product/product instance
Message no. SOLAR_SPROJECT110
Please sugegst how to reslove the error ,and a;lso please let me know is there any way to download latest pathces to dpownload from service market place .
Advance Thanks

Hi,
re-check if the 7.4 system is correctly registered in the solman SLD system.
Re-check LMDB definition for your 7.4 as JAVA system. you have to manually created the Product system. Ensure all the Component and definitions are correct.
Also do a verrification run within the LMDB. This will confirm whether all the information is correctly defined.
Please note - SLD -> LMDB -> SMSY.
So, if the first 2 don't have the correct information, you wont have much joy with smsy.
Rgds
Deepak

Java with Card Management Software

Similar Messages

Maybe you are looking for