Java2d opengl pipeline not working for me?

Hi,
this is my first post, I hope that you will help me :)
I've installed arch on my machine, and catalyst drivers.
fgl_glxgears are @ 600 FPS
fglrxinfo returns no errors.
when I run something elese written in java with opengl, everything works just fine.
but, when I use java2d and
-Dsun.java2d.opengl=trueI can't get any output, java isn't drawing anything...
it works on ubuntu machine with nvidia, but not on arch... It's AMD zacate e350 + HD 6310.
output is same when I set J2D_TRACE_LEVEL=4, no errors, just
GL_NV_fragment_program = falseand it is true when everything is working.
I tried with openjdk6 and jre, same result.
Please help me! :(

10robinho
First, welcome to Arch Linux. Please do not cross post
This is not the appropriate sub-forum, please continue with https://bbs.archlinux.org/viewtopic.php?id=132100

Similar Messages

Java2d opengl pipeline not working

Hi,
I've asked this on multimedia forum, but I think that this could be more accurate place, I hope that you will help me
I've installed arch on my machine, and catalyst drivers.
fgl_glxgears are @ 600 FPS
fglrxinfo returns no errors.
when I run something elese written in java with opengl, everything works just fine.
but, when I use java2d and
-Dsun.java2d.opengl=true
I can't get any output, java isn't drawing anything...
it works on ubuntu machine, but not on arch... It's AMD zacate e350 + HD 6310.
output is same when I set J2D_TRACE_LEVEL=4, no errors, just
GL_NV_fragment_program = false
I tried with openjdk6 and jre, same result.
Please help me!

10robinho
First, welcome to Arch Linux. Please do not cross post
This is not the appropriate sub-forum, please continue with https://bbs.archlinux.org/viewtopic.php?id=132100

-Dsun.java2d.opengl=True not working

Hello,
I'm trying to run java application using -Dsun.java2d.opengl=True, but I
always get "Could not enable OpenGL pipeline for default config on screen 0".
I use 1.5.0_04-b05 SE running on WinXP. The graphics controller is
Intel 82852/82855 GM/GME, driver Nr. 6.14.10.3762.
Can anyone help?
Thanx.
Milan

Because there is none, then intel chipset has some shortcomings when it comes down to OpenGL.
This should be clear even when buying such a card.
In your case I would write Intel an email telling them that java does not run properly. If enough do this maybe we see really fast java in near future...
lg Clemens

Clob is not working for bulk data files in PL/SQL XML program

Hi Odie,
we took your help to fix the our issue before
"https://forums.oracle.com/forums/thread.jspa?threadID=2238458&tstart=105"
working fine for : program is working for smaller size data.
Issue : now we have problem with the largr size data .
getting the below error:
Arguments
P_dir_name='/tmp'
P_file_name='CCBGO.COLO_CNG.RESPONSES.20120802.00054131826'
Environment will now switch to UTF-8 code-set.
Parts of this log file may not display correctly
as a result. This is an expected behavior.
XML_REPORTS_XENVIRONMENT is :
/apps/applmgr/product/OFDEV/ofdevora/806/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /apps/applmgr/product/OFDEV/ofdevora/806/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
stat_low = 8B
stat_high = 0
emsg:was terminated by signal 11
Appreciated for your earlier support.
Kindly suggest .
Many Thanks,
Ramesh.

Thanks ALex,
your are true it is concurrent program error ,
but it is working for small amount of data and generating the output and it is not working for larger data.
i have placed the code which i have used kindly suggest where i am going wrong.
i am calling the .rdf through the concurrent program, i've used the below query in RDF
select
BATCHHEADER
,BATCHTRAILER
,RqUID
,Severity
,PmtRefId
,StatusDesc
,ErrorDesc
,AsOfDate
,AsOfTime
,RqUID1
,SPRefId
from table(CL_CXFRFXFH_PKG.rcacknowledgments(:P_dir_name,:P_file_name));
kindly find the below code for the package CL_CXFRFXFH_PKG.
==========================
CREATE OR REPLACE package body APPS.CL_CXFRFXFH_PKG is
function rcacknowledgments (p_directory in varchar2, p_filename in varchar2)
return TRecordTable pipelined
is
nb_rec number := 1;
tmp_xml clob;
tmp_file clob;
rec TRecord;
begin
dbms_lob.createtemporary(tmp_file, true);
tmp_file := dbms_xslprocessor.read2clob(p_directory, p_filename);
rec.BATCHHEADER := regexp_replace(tmp_file, '.*<BATCHHEADER>(.*)</BATCHHEADER>.*', '\1', 1, 1, 'n');
rec.BATCHTRAILER := regexp_replace(tmp_file, '.*<BATCHTRAILER>(.*)</BATCHTRAILER>.*', '\1', 1, 1, 'n');
loop
tmp_xml := regexp_substr(tmp_file, '<\?xml[^?]+\?>\s*<([^>]+)>.*?</\1>', 1, nb_rec, 'n');
exit when length(tmp_xml) = 0;
--dbms_output.put_line(tmp_rec);
nb_rec := nb_rec + 1;
select RqUID, Severity, PmtRefId, StatusDesc, ErrorDesc, AsOfDate, AsOfTime, RqUID1, SPRefId
into rec.RqUID
, rec.Severity
, rec.PmtRefId
, rec.StatusDesc
, rec.ErrorDesc
, rec.AsOfDate
, rec.AsOfTime
, rec.RqUID1
, rec.SPRefId
from xmltable(
'/CMA/BankSvcRq' passing xmltype(tmp_xml)
columns RqUID varchar2(3000) path 'RqUID'
, Severity varchar2(3000) path 'XferAddRs/Status/Severity'
, PmtRefId varchar2(3000) path 'XferAddRs/Status/PmtRefId'
, StatusDesc varchar2(3000) path 'XferAddRs/Status/StatusDesc'
, ErrorDesc varchar2(3000) path 'XferAddRs/Status/ErrorDesc'
, AsOfDate varchar2(3000) path 'XferAddRs/Status/AsOfDate'
, AsOfTime varchar2(3000) path 'XferAddRs/Status/AsOfTime'
, RqUID1 varchar2(3000) path 'XferAddRs/RqUID'
, SPRefId varchar2(3000) path 'XferAddRs/SPRefId'
pipe row ( rec );
end loop;
dbms_lob.freetemporary(tmp_file);
return;
end;
end;
============================================
Many Thanks,
Ramesh.

Converting from 2D to 3D not working for me

I am trying to follow the tutorial "Converting from 2D to 3D" and it is 'not working for me.' When I open the image 'archer...' I do not get layers, but only the background image, and consequently no 3DAxis widget appears.
This is my first try at this, and I am stuck trying to figure out what is wrong.
I am running Adobe Photoshop CS4 Extended, version 11.01 on Vista, with 4GB of RAM, 500GB HD
Processor speed 2200MHz
NVIDIA GeForce 7100
Memory available to PS 3255MB
Memory used by PS 70 percent
If anybody could please point me in the right direction, I would greatly appreciate it!
christian

it can work with the Background layer just fine, go to 3d->New Shape from Layer->Cone (or whatever) and then select one of the 3D tools and it should appear. Note though that OpenGL drawing must be enabled in Edit->Preferences->Performance to be able to see it.
Using the 3D Axis: http://help.adobe.com/en_US/Photoshop/11.0/WS0FB519CE-94B2-44d0-AFBE-7227747D20B9.html

I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

IPhone 6 External Mic not working for Siri/Dictation

I am finding that the external mic on my iPhone 6 works for phone calls and voice memos, but does not work for Siri/Dictation. When I plug in the earbuds, they work for everything (including Siri/Dictation).
Was chatting to Apple support who had me reset all settings. I thought that worked, but realized that after a reset, Siri is off and I was talking to "Voice control" (which works). When I turned Siri back on, it does not work.
I have two questions for the community to see if you can help:
1- I have been assuming this must be a software problem since the mic does work for non-Siri access. But is that true? Is there a hardware component that Siri depends on which could be faulty here?
2- If it is software, what action should I try to address it? I have done a reset all settings already and that did not help.
Doug

Hi, everyone. I talked to Apple Genius at Apple Store last week, she said it should be a software issue and I needed to reset my iphone 6 plus as a new device and I can not use the backup restore from my iCloud, it was because the microphone bug or glitch can be in the backup also. Ok, followed her advice, erased all contents and set my iphone as a new device , the microphone worked for an hour, but went bad again. I used "voice memo" app from Apple to test the microphone. It is the best tool since it doesn't involve any provider's network and it doesn't need another person's phone to listen and test. If you can hear your voice recording clearly, then the mic works. I tested it 3-4 times a day for a few days now, half of the time the mic doesn't work. So, set as a new device isn't working. The issue is intermittent and it comes and goes as it likes, so very annoying. I carry my Apple EarPods with me in these past few days ust in case I need to make important phone calls. Will need to go back to Apple Genius this weekend for sure. Will give update after the weekend.

CALLER ID not working for International incoming calls

Hi,
I've a strange issue where CALLER ID not working for International incoming calls, it shows INTERNATIONAL UNKNOWN NUMBER in the phone display, but the number shows correclty in Verizon Call assistant !!!
Any clue?

yashshankar wrote:
Hi
I recently purschased an Online number but the caller id does not work for incoming calls.How do we resolve this problem?.
Regards
Yash
You didn't mention what country your Online Number is in. Not all of Skype's Online Numbers are eligible for use as Caller ID when calling telephones or sending SMS messages. If your number is from one of these countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), then it can be used this way. Otherwise, you can use a mobile number from countries other than Japan or Mexico as Caller ID with Skype, after the number goes through a verification process where Skype sends SMS messages with codes to that number.
To get to these settings, log into your Skype account here on the Skype web site using the "Account" link at the top of this page. You'll see a screen that would include your current Caller ID settings, and a link to change that. If your Online Number is from one of those countries I referenced above, just select it and you're done.
Hope that helps!
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Select All in a table does not work for Drag and Drop

Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
Does anyone know how to get Select All to work for a Drag Source?
Thanks.
-Ed

Frank-
OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
Thanks again for the reply.
-Ed

Form Designed in LiveCycle will not work for End User

Please Help!
I am a newbie to Adobe LiveCycle but recognized the utility in the program, so decided to give it a while to try and streamline some of my employer's forms. After spending too much time learning how to design a form (much to the dislike of my boss), I am finally going to have to ask for some help. So here's the deal:
I've designed a dynamic pdf in LiveCycle with two master pages and two repeating flowed subforms. The first repeating subform is basically an expanding table intended to be used as a photographer's log where they can log each photo taken with the camera. The expanding table has some code with a button at the top for the end user to enter the number of photos on the photo roll, click submit, and table expands to however many instances of rows are needed for each photo that was taken. The second subform is basically an image field and text fields used as photo captions/photo compilation pages. When the end user clicks submit on the first subform to expand the table, I also have javascript in that click event to also create same amouint of instances of the second subform (the photo compilation page(s)). Each text field for the photo caption on the second subform is populated by the data entered into the photo log table cells. I was able to find a script to correctly populate those fields for each instance of the table. Wish I had the form here, but it's at work at the moment.
My problem is this: I've scratched and clawed to get all of the forms expanding correctly and the scripts populating each instance of the fields correctly and everything works great in LiveCycle preview. I then saved the form as PDF for use by my field crew personnel (whom all use, at the very least, Adobe Pro 9, but most Pro X). I sent the new form to them and they move it to their desktop, open it with Adobe Pro, and populate all of the fields and everything works swimmingly. However, once they save it, it gets all jumbled and they can't even print it. We even thought we found a workaround by entering all data and printing to PDF, but even that has turned out to not work. I checked to make sure that I designed and saved the form in LiveCycle for use with the Adobe Pro versions, but still not working for my end users.
Anyone have any thoughts on my long explanation?? Please HELLLLPPPP!

The error(s) occur when trying to save the document. I want each user to tell the first page how many rows they will need in the photo log table, so they would enter however many photos were taken in the box: "Number of Photos on Roll:" ---> Then click the "Submit" cmd button. That should expand the table. Once it expands, it should also add the same amount of instances of the photo compilation page (2nd Page) as there are rows in 1st page table. Then the user will populate each cell of the table on page 1 with data. The data entered into the page 1 table cells will populate the text fields (photo caption) in Page 2 once the user clicks on the "Populate Captions!" cmd button in the lower left corner of the table on Page 1.
The problem is in the distributing of the form to the user so they can save the form after populating the data. I did a test run this morning and for some reason it did do the "print to PDF" correctly for 5 photos on the roll (though this has not been happening every time and especially for a large number of pages, ie. 80 photos). However, after entering the data for 5 rows on page 1 and then populating the 5 photo compilation pages, I saved a copy as "Save As PDF" and closed the document. Then re-opened the copy in Acrobat Pro X. The new copy:
-had 5 additional rows added to Page 1
-Duplicates of some of the fields
-Only retained the 1st instance of the Second Page (Photo w/ Caption) and not all fields were populated
Again, this all works fine in the LiveCycle Preview but not anywhere else. I do not have this set up to be linked to an external data source (YET) but there is javascript in the cmd buttons. I also do not want to distribute this form to end users and then collect the data back from them. I want them to be able to save a copy of my LiveCycle designed form, open in Adobe Pro, populate the data and save as many copies as needed for form production.

Wake on Demand: Not working for some services, others OK

I haven't been able to figure this problem out... Wake on Demand for a previous generation Mac mini running Snow Leopard 10.6.8 works for things like a CrashPlan automated backup but does not work for things like remote SSH login or Screen Sharing. In all cases, the services are being originated on a latest generation iMac running Mac OS X Lion (10.7.2).
While it's not an earth-shattering event to get off my backside and walk over to the Mac mini across the house to press its Shift key to waken the thing, it gets rather old to have to keep doing so, especially since CrashPlan automated backups are taking place while the Mac mini is otherwise asleep (the sleep indicator is slowly pulsing).
I've been through the Apple tech notes regarding Wake on Demand for Snow Leopard 10.6 and have ensured that AirPort and its network are at the top-most position in their respective lists. Other than that, I'm not sure what else I can do. Wake on Network is enabled in the Snow Leopard Mac mini's network System Preferences and there doesn't seem to be any on/off option in the AirPort Extreme base station (just recently updated to 7.6 firmware).
Any thoughts... hints... suggestions?
One final note: this Mac mini is new as of July 2011; just days before the latest generation of Mac mini came out. It came pre-installed with Snow Leopard and, as soon as the users of this mini find software replacements for the old PPC style applicaitons they're used to using, will be upgraded to Lion. However, I feel a bit unsettled in making the move to Lion if I can't get a Snow Leopard feature to work properly. There's no telling if the Lion upgrade will actually fix this behavior or make it worse.
Thanks in advance.

I don't think you can wake on network with a closed lid. Try keeping the lid open and putting the machine to sleep. Does it work?

DNS not working for some computers

We have a SRP521W router and is set up with one SSID for wireless. In our office all the computers (5) can connect but only some may get on the internet. I have a laptop I am testing with and it will not connect, wired or wireless.
I found an article relating to flushing DNS, tried that, no luck.
I found another that said I should try setting my DNS to 208.67.222.222 and this worked, internet works fine.
I tried rebooting the DSL modem and router, tried many different things but am not a networking guru so I am just not sure why the DNS is not working for one computer but works for another, connected to same LAN or SSID.
Thanks,
Brad

Though what Don posted is one way to accomplish it, I never add anything to my DNS and it works fine. Windows DNS, in a default installation, will automatically forward to the root (.com, .edu, .gov, etc.). So I always just point my workstations
to my Domain Controller as their DNS and everything works just fine without any additional configuration.
Guess I'm one of those who won't even trust Google for sharing a DNS, particularly when I have never needed to set up any forwarders.
.:|:.:|:. tim

Thunderbird Mission Control Desktop/AutoConfig not working for some users

I have the file: "C:\Program Files (x86)\Mozilla Thunderbird\defaults\pref\custom.js"
It contains:
pref("general.config.obscure_value", 0);
pref("general.config.filename", "TMcustom.cfg");
I have the file: "C:\Program Files (x86)\Mozilla Thunderbird\TMcustom.cfg"
It contains:
var promptService = Components.classes["@mozilla.org/embedcomp/prompt-service;1"]
.getService(Components.interfaces.nsIPromptService);
promptService.alert(null, "title", "testing");
For most of my users the alert pops up fine when I start Thunderbird, but for a few it doesn't. All of the machines where setup with the same install script. If I log into one of the machines where it's not working as a different user, then it works fine, so I know the files are in the right spot. So why would it not work for specific users? Is there something in the user's Windows profile that could cause it to not work? Or are there any other suggestions?

As it turns out this was a known bug that was corrected in the recent release of Java 7_65 and Java 8_11. Here is a link to the bug description in the database.
Bug ID: JDK-8019274 RMI thread can no longer call out to AWT thread for webstart app

After Upgradation BPF is not working for some users

Hi All,
We have recently upgraded from BPC 5.1 to 7MS SP7. we are having multi server setup with one application / reporting server (windows 2003 and one sql server 2008 (windows 2003 64 bit).
Intially before upgradation we don't have any issues with BPF and it worked fine for all users. But post upgradation tasks within the BPF does not work for other users except for the first two people who first used it. Other users have the same rights as the ones who can access the tasks.
when they click on the link it gets them to eExcel and the right application but doesnt open the package or report assigned to the task. It doesn't give us any errors, on the status bar we get a message finalising but does not getting any thing.
Any inputs ??

Hi,
Are you sure that those users have installed BPC 7 SP7 clients on their machine? Meaning that you uninstalled 5.1 clients and installed the new client from http://servername/Osoft?
If yes, you should maybe run a client diagnostic on the machines and also check the Management Console for any error messages.
Hope this will drive you to a potential solution.
Best Regards,
Patrick

Outlook autodiscover is not working for some users in coexistence

Hi
We are doing exchnage 2013/2010 coexistence
Most everything is ok BUT outlook autodiscover is not working for some exchange 2010 users now that 2013 is in the front!!!. We end up creating the profiles manually. It has affected some but not all the users.
I followed the instructions here but it didn't help.
http://blogs.technet.com/b/tips_from_the_inside/archive/2012/01/11/autodiscover-fails-for-one-or-more-users.aspx
Using outlook 2010, 2013, patches, .... didn't make a difference
Would you please help?
Thank you

Hi
If it is affecting only few handful of users i could suspect a mailbox corruption and would recommend to move mailbox and see the results.
Also you can try below
You need to set the values MaxFieldLength, MaxRequestBytes & MaxTokenSize to below on Exchange 2010 CAS servers as well as Exchange 2013 CAS servers
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxFieldLength
Type: DWORD
Value: 65534
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxRequestBytes
Type: DWORD
Value: 16777216
Path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\Kerberos\Parameters
Name: MaxTokenSize
Type: REG_DWORD
Value: 48000
Just reboot the servers once its done and you will be good to go.
References
https://social.technet.microsoft.com/Forums/en-US/cc2929ac-4d36-4e84-a567-ce9b3bec1398/http-400-bad-request-on-iis-8-exchange-2013-cu2-on-windows-server-2012-autodiscovery-is-not?forum=exchangesvrgeneral
http://blogs.technet.com/b/kristinw/archive/2013/03/28/recommended-changes-and-enhancements-to-support-exchange-in-an-enterprise-environment-whew.aspx
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

Java2d opengl pipeline not working for me?

Similar Messages

Maybe you are looking for