Javah -jni throws error

I' m trying to create appropriate *.h file by javah utility as discribed in java tutorial
javah -jni MyClass
but get the error message Class MyClass can not be found...
the class MyClass is in the same directory from where i run "javah -jni MyClass" command
Thanks in advance

Try inserting this before the -jni:
-classpath .

Similar Messages

Run javah -jni HelloWorld gives error...

hi all i am new to JNI. i wanted to compiled my HelloWorld.java to header file. in which directory shld i run? i am using jdk1.3.
this is my error:
D:\jdk1.3.1\bin>javah -jni HelloWorld
Error: Class HelloWorld could not be found.
i hav installed JNI1.2 but not using it yet. what are the settings i shld do?
thanks to everyone.
seiw77

Check your CLASSPATH. Your HelloWorld class should come under the directories listed in the CLASSPATH. Also make sure you include the current working directory "." in the CLASSPATH

Getting error message with javah -jni

Hi,
I am trying to generate .h file using javah -jni command.
I am executing the
prompt>javah -jni C:\proj\HelloWorld
But it's giving the error
Error: Class HelloWorld could not be found.
But the class file is there in that folder.
Could you please tell me why i am getting this error?
Regards,
Srinivas.

Try this:
javah -jni -classpath C:\proj HelloWorld
Usage: javah [options] <classes>
where [options] include:
        -help                 Print this help message and exit
        -classpath <path>     Path from which to load classes
        -bootclasspath <path> Path from which to load bootstrap classes
        -d <dir>              Output directory
        -o <file>             Output file (only one of -d or -o may be used)
        -jni                  Generate JNI-style header file (default)
        -old                  Generate old JDK1.0-style header file
        -stubs                Generate a stubs file
        -version              Print version information
        -verbose              Enable verbose output
        -force                Always write output files
<classes> are specified with their fully qualified names (for
instance, java.lang.Object).

Problems creating packaged .h files with javah -jni

I have all of my .java and .class files in package ClassLib.Satrack.
My directory structure is C:/SatrackIIP/NavComponent/ClassLib/Satrack.
I compiled all java files by calling javac ClassLib/Satrack/*.java from NavComponent directory. Then still from NavComponent directory, I call javah -jni ClassLib/Satrack/TrajectoryGenerator. However I am getting an error message:
Error: Class ClassLib/Satrack/TrajectoryGenerator could not be found.
Why am I getting this error?

Fixed it. I should be calling javah -jni ClassLib.Satrack.TrajectoryGenerator and not using dashes in between.

Tring to use javah -jni

Hi all,
I am tring to create h file for java native class.
I am using javah -jni (it worked fine in the past) ,and i am getting an error message: (I replaced the class name with myClass)
error: cannot access myClass
file myClassclass not found
javadoc: error - Class myClassnot found.
Error: No classes were specified on the command line. Try -help.
But the class is definitely there
Can you please help me?
Thanks very much
Inbal

Hi,
I'm working with jdk1.5.0_06. I have the same problem that you had. Assuming that jdk is in "C:\Archivos de programa\Java\jdk1.5.0_06", I've fixed the environment variables, like these:
set path=C:\Archivos de programa\Java\jdk1.5.0_06\bin;C:\Archivos de programa\Java\jdk1.5.0_06\lib;C:\Archivos de programa\Java\jdk1.5.0_06\include;%path%
set CLASSPATH=C:\Archivos de programa\Java\jdk1.5.0_06\bin;C:\Archivos de programa\Java\jdk1.5.0_06\lib;C:\Archivos de programa\Java\jdk1.5.0_06\include;.;
Then I use javah myclass... and I still get the error!
I need some help. What have you done to solve the problem??
Thanks

PL/SQL throwing errors! trying to alter dates

the following code keeps throwing errors, I was wondering if it is due to me getting confused when to use ":" before a variable and also ":=" when setting values?
Can anyone see what I am doing wrong?
Here is the code, at the moment it is throwing an error on line 44
ORA-06550: line 44, column 1:
PLS-00103: Encountered the symbol "" when expecting one of the following:
CODE.....
DECLARE
     QNStart DATE;
     QNFinish DATE;
     Q1Start DATE;
     Q1Finish DATE;
     Q2Start DATE;
     Q2Finish DATE;
     Q3Start DATE;
     Q3Finish DATE;
     Q4Start DATE;
     Q4Finish DATE;
     Q5Start DATE;
     Q5Finish DATE;
     QNT NUMBER;
     Q1T NUMBER;
     Q2T NUMBER;
     Q3T NUMBER;
     Q4T NUMBER;
     QNR NUMBER;
     Q1R NUMBER;
     Q2R NUMBER;
     Q3R NUMBER;
     Q4R NUMBER;
BEGIN
     case current_date
          when current_date between to_date('01-JAN', 'DD-Mon') AND to_date('31-MAR', 'DD-Mon') then
                    QNStart := to_date('01-JAN', 'DD-Mon');
                    QNFinish := to_date('31-MAR', 'DD-Mon');
          when current_date between to_date('01-APR', 'DD-Mon') AND to_date('30-JUN', 'DD-Mon') then
                    QNStart := to_date('01-APR', 'DD-Mon');
                    QNFinish := to_date('30-JUN', 'DD-Mon');
          when current_date between to_date('01-JUL', 'DD-Mon') AND to_date('30-SEP', 'DD-Mon') then
                    QNStart := to_date('01-JUL', 'DD-Mon');
                    QNFinish := to_date('30-SEP', 'DD-Mon');
          when current_date between to_date('01-OCT', 'DD-Mon') AND to_date('31-DEC', 'DD-Mon') then
                    QNStart := to_date('01-OCT', 'DD-Mon');
                    QNFinish := to_date('31-DEC', 'DD-Mon');
     End Case
:Q1Start := ADD_MONTHS(:QNStart,-3);
:Q1Finish := ADD_MONTHS(:QNFinish,-3);
:Q2Start := ADD_MONTHS(:QNStart,-6);
:Q2Finish := ADD_MONTHS(:QNFinish,-6);
:Q3Start := ADD_MONTHS(:QNStart,-3);
:Q3Finish := ADD_MONTHS(:QNFinish,-3);
:Q4Start := ADD_MONTHS(:QNStart,-4);
:Q4Finish := ADD_MONTHS(:QNFinish,-4);
:Q5Start := ADD_MONTHS(:QNStart,-5);
:Q5Finish := ADD_MONTHS(:QNFinish,-5);
select COUNT(COUNT(*)) INTO :Q1T from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
WHERE f.DATE_ENTERED BETWEEN :Q1Start AND :Q1Finish
AND a.ACTION_SCORE = 'Y'
AND f.INPUT_TYPE = a.ACTION_NAME
GROUP BY f.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q2T from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
WHERE f.DATE_ENTERED BETWEEN :Q2Start AND :Q2Finish
AND a.ACTION_SCORE = 'Y'
AND f.INPUT_TYPE = a.ACTION_NAME
GROUP BY f.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q3T from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
WHERE f.DATE_ENTERED BETWEEN :Q3Start AND :Q3Finish
AND a.ACTION_SCORE = 'Y'
AND f.INPUT_TYPE = a.ACTION_NAME
GROUP BY f.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q4T from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
WHERE f.DATE_ENTERED BETWEEN :Q4Start AND :Q4Finish
AND a.ACTION_SCORE = 'Y'
AND f.INPUT_TYPE = a.ACTION_NAME
GROUP BY f.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :QNT from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
WHERE f.DATE_ENTERED BETWEEN :QNStart AND :QNFinish
AND a.ACTION_SCORE = 'Y'
AND f.INPUT_TYPE = a.ACTION_NAME
GROUP BY f.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q1R from FF_ACTIONS a
WHERE a.DATE_ENTERED BETWEEN Q1Start AND Q1Finish
AND a.COMPANY_NAME IN
     (select f.COMPANY_NAME from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
     WHERE f.DATE_ENTERED BETWEEN Q2Start AND Q2Finish
     AND a.ACTION_SCORE = 'Y'
     AND f.INPUT_TYPE = a.ACTION_NAME
     GROUP BY f.COMPANY_NAME)
GROUP BY a.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q2R from FF_ACTIONS a
WHERE a.DATE_ENTERED BETWEEN Q2Start AND Q2Finish
AND a.COMPANY_NAME IN
     (select f.COMPANY_NAME from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
     WHERE f.DATE_ENTERED BETWEEN Q3Start AND Q3Finish
     AND a.ACTION_SCORE = 'Y'
     AND f.INPUT_TYPE = a.ACTION_NAME
     GROUP BY f.COMPANY_NAME)
GROUP BY a.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q3R from FF_ACTIONS a
WHERE a.DATE_ENTERED BETWEEN Q3Start AND Q3Finish
AND a.COMPANY_NAME IN
     (select f.COMPANY_NAME from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
     WHERE f.DATE_ENTERED BETWEEN Q4Start AND Q4Finish
     AND a.ACTION_SCORE = 'Y'
     AND f.INPUT_TYPE = a.ACTION_NAME
     GROUP BY f.COMPANY_NAME)
GROUP BY a.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q4R from FF_ACTIONS a
WHERE a.DATE_ENTERED BETWEEN Q4Start AND Q4Finish
AND a.COMPANY_NAME IN
     (select f.COMPANY_NAME from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
     WHERE f.DATE_ENTERED BETWEEN Q5Start AND Q5Finish
     AND a.ACTION_SCORE = 'Y'
     AND f.INPUT_TYPE = a.ACTION_NAME
     GROUP BY f.COMPANY_NAME)
GROUP BY a.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :QNR from FF_ACTIONS a
WHERE a.DATE_ENTERED BETWEEN QNStart AND QNFinish
AND a.COMPANY_NAME IN
     (select f.COMPANY_NAME from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
     WHERE f.DATE_ENTERED BETWEEN Q1Start AND Q1Finish
     AND a.ACTION_SCORE = 'Y'
     AND f.INPUT_TYPE = a.ACTION_NAME
     GROUP BY f.COMPANY_NAME)
GROUP BY a.COMPANY_NAME;
EXECUTE
Cheers
Simon

Dave had given you already some good advice.
Your code is not only too complicated, but you have also probably a bug in it. You have for instance a QNstart as to_date('01.01, 'dd.mm') and a corresponding QNfinish as to_date('31.03', 'dd.mm'). As this means, it is the time portion at 00:01, you are missing the complete last day of this interval. So you better do:
declare
l_QNstart      date;
l_Q1start      date;
l_Q1finish     date;
l_q1t          number
begin
l_QNstart := trunc(sysdate, 'Q');
l_Q1start := add_months(l_QNstart, -3);
l_Q1finish := l_QNstart;
-- your condition is now
select count(count(*))
into   l_q1t
from   ff_actions f, ff_action_type_lov a
where f.date_entered >= l_Q1start and f.date_entered < l_Q1finish
and    a.action_score = 'y'
and    f.input_type = a.action_name
group by f.company_name;
end;
/Message was edited by:
Leo Mannhart
btw: what is the difference between Q1Start / Q3 Start and Q1Finish / Q3Finish resp.?

Report throwing error

Hi BI Experts,
I have an issue in the report output. The query is giving the data but the report is not showing the same.
when nonexisting values are given, report is throwing ERROR instead of giving blank page. Client is expecting blank page or dummy page with tables or headings etc but not the error message.
Please suggest a solution for this.
Let me know if anybody needs any other information regarding this.
Thanks in advance.

you need to use no data found logic in order to get blank or any message saying no data found for that selected value.
check this link
https://blogs.oracle.com/xmlpublisher/entry/no_data_found
or
send me your sample xml having data and no data and template i can try at my side. email: [email protected]
assign me some points if helpful

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

Hi Leo22,
Does this error occur if you use any of the example programs that come shipped with LabVIEW? I would try opening one of the examples that write data to Word and see if those give you an error. Also, have you tried just putting down a New Report.VI and change the report type to Word? If this simple vi (that's all you need to open Word) breaks, I would check to see if there are any instances of Word still open. Check the task manager to see if any word processes are still open. There should not be a problem accessing Word 2003 from LabVIEW 7.0. If neither of these solutions work, please give some more detail about your application and we can research further. Thanks!
Jeremy L.
National Instruments
Jeremy L.
National Instruments

Function module throwing error from work area. Cannot find the problem...

REPORT ZPSMARTFORM1.
tables: zptable1.
types: begin of ty_zptable1,
      f1 type zf1,
      f2 type zf2,
      f3 type zf3,
end of ty_zptable1.
data: itab type table of ty_zptable1 with header line.
data: wa type ty_zptable1.
select f1 f2 f3 from zptable1 into table itab.
CALL FUNCTION '/1BCDWB/SF00000005'
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
TABLES
    ITAB                       =   .
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
this is my driver program.In my form interface there are tables,import,export are there where i have to declare tables data.If i am putting wa means it is throwing error.Please show me the clear information.
Edited by: Julius Bussche on Nov 14, 2008 10:09 AM

REPORT ZPSMARTFORM1.
tables: zptable1.
types: begin of ty_zptable1,
f1 type zf1,
f2 type zf2,
f3 type zf3,
end of ty_zptable1.
data: itab type table of ty_zptable1 with header line.
data: wa type ty_zptable1.
select f1 f2 f3 from zptable1 into table itab.
CALL FUNCTION '/1BCDWB/SF00000005'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
ITAB = .
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Plz for this driver program. Give me the exact solution.I am passing the information like itab like zptable1 ther ein the smart form table. Even now i am getting error.Here in this driver program i passed itab = itab means .I am not getting solution.If i have to change any function module name means plz tell me.What i have to put there.Plz give me the correct solution

SSRS dataset throws error when another stored procedure is called inside dataset stored procedure

Hello;
I am using Report Build 3.0, I have a simple report which gets data using dataset which is created from a Stored Procedure. I have another stored procedure which updates the data in the table which is used for the report. I want to get the live data on report everytime
the report is run so that I call that stored procedure (sp_updatedata) inside my report dataset stored procedure and here where my report fails as it throws error while creating dataset.
Here is sample:
sp_updatedata (this only returns "Command(s) completed successfully"
Create Proce sp_getReportData
As
Begin
Exec sp_updatedata -- I call it to update the data before it displays on the report
Select * from customers
End
If I remove this line it works.
Exec sp_updatedata -- I call it to update the data before it displays on the report
Thanks
Essa Mughal

Hi MESSA,
According to your description, you create a dataset based on a stored procedure. In this procedure, it calls another procedure. Now it throws error when creating dataset. Right?
In Reporting Services, when creating dataset, all the query or stored procedure will be executed in SSMS. So if the procedure can be executed in SSMS, it supposed to be working in SSRS. However, it has a limitation in SSRS. In a dataset, it can only return
one result set.
In this scenario, I don't think it's the issue of calling other procedure inside of procedure. Because we tested in our local environment, it works fine. I guess the sp_updatedata returns a result set, and the "select * from customers" returns
another result set. This might be the reason cause the error.
Reference:
Query Design Tools in Report Designer SQL Server Data Tools (SSRS)
Reporting Services Query Designers
If you still have any question, please post the error message and the store procedure (sp_updatedata).
Best Regards,
Simon Hou

Throwing error message for a component

I have a form in which there are several fields. One of field is LOV for which i do some validation on valuechangeListener. If that validation fails, i send error to the form for that particular field. It is working fine. but after this if user submits the form, it is submitted. In case of validation failed by framewrok, it is not submitted. HOw i can set that component in error state so that form is not submitted. I am using following code to throw error or component:
FacesMessage msg = new FacesMessage(FacesMessage.SEVERITY_ERROR, null, "Invalid value");
FacesContext context = FacesContext.getCurrentInstance();
context.addMessage(binding.getClientId(context), msg);
I am using Jdeveloper 11g with latest patch set of ADF i.e. 11.1.3.x

Hi,
actually you are not throwing an error but set a message to display to the user. Can't you just create a validation for the input field. The field has a property for you to define a managed bean validation reference. You can generate the method skeleton from JDeveloper.
Frank

WebI report throwing error when migrated from XIR2 to XI3.1

I have some webi reports built in BO XIR2 on OLAP universes (SAP BW3.5 based). Recently I have migrated the reports from old XIR2 environment to a new XI3.1 environment.
The specification of new system is as below:
BO XI3.1
SAP BW 3.5
No SP and FP is installed. (Actually when I tried to install the SP2, it failed)
After the migration, some of my reports are running for 5 minutes and then throwing an error like below:
A database error occured. The database error text is: Error in MDDataSetBW.GetCellData. See RFC trace file or SAP system log for more details. (WIS 10901).
The same report is working fine in old system.
Has anyone faced this problem yet?
Regards

Hi Jacques,
The transports are already imported.
What I can see is if there is a query with only dimension objects and no measure, then that is throwing error in XI3.1. But the same query is running fine in XIR2.
Any Idea?
Thanks and Regards

Database.LoadDataSet() method throwing error while retriving data from IBM DB2 database

Database.LoadDataSet() method is throwing error during retriving data from empty table of IBM DB2 database. It is giving error code "SQL0100W".
“Error Message: 0NO_DATA [02000] [IBM] [DB2 / NT] SQL0100W FETCH, whether there is a line to be UPDATE or DELETE, or of the query result is an empty table .
SQLSTATE = 02000”

Hello SharayuPandit,
For issues regarding DB2, i suggest that you could post it to DB2 related forum:
https://www.ibm.com/developerworks/community/forums/html/forum?id=11111111-0000-0000-0000-000000000842
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'
Word, and powerpoint application are working fine.
Environment : Windows 7 64-bit, MS Office 2013 64-bit
Steps to recreate
(i) Create new user account and add to any group ( do not log on using this
account)
(ii) runas /user:<new user account> <fullpath>\excel.exe
it will ask password so enter on command prompt
(iii) open any excel document and click File->Print
(iv) verify result (it is failing) it pop ups below error
Error:`Microsoft Excel
No printers are installed. To install a printer click the File tab, and then click
Print. Click No Printers Installed, and then click Add Printer. Follow the
instructions in the Add Printer dialog box.

Sorry for late reply i was not at work
I have a default set excel is still throwing error. Interestingly winword , powerpoint and publisher are working fine. I am able to print from all office applications except Excel.
Probably excel behaves differently from other office applications.
Probably it is a bug in excel
Workaround : Log on to a system once using newly created account then runas excel using this account then print works fine.
It means something in user profile should be configure to run excel print operation. Could you please somebody help what I need to configure in user profile that makes print operation success?

Universe Creation On OLAP Cube(SSAS) throwing error. in BO X1 3.1

Hi Experts,
I have created OLAP universe based on SSAS Cube using Microsoft SQL Server 2005 Analysis Services Driver.
i have created webi report based on this SSAS Cube,everything is fine
but when i create condition in universe level,if i use the same universe in webi report its throwing error:An internal error occured while calling the 'processDPCommands' API.
Thanks,
Prasad

This should be set up in steps, Have you configured java AD kerberos so you can login via your web/app with AD? This is a prerequisite before setting up any type of delegation to the DB.
You can also set up SSO in the front end but this shouldn't be necessarry for delegating to the DB.
What SPN's do you need...
Well if using java AD you should have an SPN for the account running the SIA (typically BOBJCentralMS/something) This SPN needs to be set in the CMC, You will need the krb5 and bsclogin files to login to your web/app with kerberos/AD. The krb5.ini will have to have a setting forwardable = true, and finally the MSAS server will need SPN's http://support.microsoft.com/kb/917409
This a a very complex configuration and you will likely need to open an incident with support to get an engineer to help. I'm not sure where our current docs for the configuration are.
Regards,
Tim

Javah -jni throws error

Similar Messages

Maybe you are looking for