JavaHelp 1.0 is required to view the JavaHelp output?????

Hi All,
I'm getting this dialog after I have generated the JavaHelp.
"JavaHelp 1.0 is required to view the JavaHelp output. Please
install the latest version of JavaHelp"
But I have allready installed this "C:\jh1.1.3" and inserted
these 2 System variables "JAVAHELP_HOME" - "C:\jh1.1.3" and
"JHHOME" - "C:\jh1.1.3".
I have allso installed "j2sdk1.4.1_01".
What else needs to be done?
BR
Thomas

I faintly remember a problem with Robohelp and JH1.1.3 a
couple of years ago, I don't know if this was ever resolved.
I have found the following that might help.
Click Here
Just found a link to the following Forum thread on Peter
Grainge's site
Thread
here
Hope this helps.
Brian

Similar Messages

Having in proper cursor movement when view the discoverer output

Hi all,
When I try to view the discoverer output in the discovere desktop by using the keyboard tab key to move from one column to another column, the data was not displayed properly. It is just like not enough memory, but if I used the mouse to scroll then it was ok. What is the problem then ??
I am using discoverer 9i.
Thanks
Lim

Hi,
This forum is for the Designer tool. You would be better off using the "Business Intelligence" Forum under the "Modules" heading.
Regards,
Steve

Not able to view the webhelp output in Robohelp 9

Hello,
I am in a project where we have to create webhelp output from Robohelp 9. Whenever I generate the webhelp ouput I am not able to view the the contents. Although, the webhelp is opening in a browser window but there are no topics present in the contents. The other ouputs like .chm and .dox are fine, but there is some problem with the webhelp which I am unable to figure out.
Regards,
Ruso

What browser are you using?
If Chrome, try something else. Chrome works fine with help on the server but not locally. There is more in Snippets on my site about the Chrome issue.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Problem in viewing the webhelp output in a RoboHelp-DocumentX project

Hi, I am working with Robohelp X5. The project is generated together with DocumentX and hence contains more than 15,000 files. Secondly, the proper webhelp output is extremely essential for this project as it concerns the links which are also in thousands.
A problem has occured where the webhelp is getting generated, but I cannot view the output. The generated file occurs in the webhelp folder, but displays only a single page with no navigation pane or even the content/search tabs.
The project had been successful in April. While updating it, I copied the Robohelp project folder and things started. Initially the prosource folder was showing an error while opening the project. When I copied it again to a different location, the project file opened and functioned fine, but the output problem is still there.
What I have now id - The original folder with the crashed project, 2 new copies of this folder where the project works fine and the webhelp is generated with no output.
Please help me, because starting from scratch with DocX files is a nightmare!

By DocumentX do you mean the Microsoft Word format .docx?
If so I am not surprised you have had trouble. Quite simply, X5 is not Word 2007 compatible.
I don't follow "hence contains more than 15,000 files". What's the connection with using Word that causes a high number of files that would not occur otherwise?
15,000 topics in one project is high anyway and at the level I would expect problems.
Are you using RoboHelp for Word or RoboHelp HTML?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Help require to get the XML output to design template- JDE

Hi Friends,
I am asking this question from JDE perspective.I want to design XMLP Template for R40572 Check Printing.
When I upload an blank template and after attaching RD, When ever I initiate a check from P04572 Application.RThe Write Row exit will lead to check printing which in turn will call a batch R04571 and this batch will call R04572(Which I require the XML output) since it is the second report and we cant direct it to local server I am not able to get the XML output..
Another think is since its running in server i think its not taking the RD modification we done in loacl because it always fires PDF .

Hi,
I assume you're Using XMPOSA for generating the files locally. What I suggest is, you set the application to run with the report definition by default. That way, even when it is called, it will be called along with the report definition. You can take the resultant XML file from P95630
hope this helps,
-Domnic

Not able to view the XML Output, after Output format changed to XML

Hello Everybody...
After running the concurrent program having output type of XML. Output is not getting generated.
But getting generated when output type is changed to Text.
Please find the below log file info. :
BioReliance Receivables: Version : UNKNOWN - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXBRAXINVNEW module: XXBio Print Selected Invoices New
Current system time is 28-MAY-2009 05:31:28
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_order_by='TRX_NUMBER'
p_trx_number_low='9859529'
p_trx_number_high='9859529'
p_installment_number='1'
p_open_invoice='N'
p_check_for_taxyn='N'
p_choice='SEL'
p_header_pages='0'
p_debug_flag='N'
p_message_level='10'
p_userid='9092'
XML_REPORTS_XENVIRONMENT is :
/oraapps2/devukora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /oraapps2/devukora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Spawned Process 14380
REP-3000: Internal error starting Oracle Toolkit.
MSG-00100: DEBUG: AfterPForm_Trigger +
MSG-00100: DEBUG: Multi Org established.
MSG-00100: DEBUG: AfterParam_Procs.Get_Country_Details
MSG-00100: DEBUG: AfterParam_Procs.Switch_On_Debug
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_Low
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_High
MSG-00100: DEBUG: AfterParam_Procs.Get_Tax_Option
MSG-00100: DEBUG: AfterPForm_Trigger -
MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Printing_Option
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 102
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choice: SEL
MSG-00100: DEBUG: Choice is other than ADJ, setting ORDER BY.
MSG-00100: DEBUG: BeforeReport_Trigger -
MSG-05000: DEBUG: Trx No... 9859529
MSG-00010: 05:31 1 Transaction: 9859529
Report Builder: Release 6.0.8.25.0 - Production on Thu May 28 05:31:28 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 14767798 on node RCKBLADE05 at 28-MAY-2009 05:31:36.
Post-processing of request 14767798 failed at 28-MAY-2009 05:31:36 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
------------- 2) PRINT   -------------
Finished executing request completion options.
Concurrent request completed
Current system time is 28-MAY-2009 05:31:36
Please do the needful in resolving the issue.
Thans in Advance.
Abdul.

Hello Hussein,
Thanks.
Before I could ask the DBA to chage the DIPLAY parameter, I could see error in FNDOPP*.txt file, as some issue with tag "split-by-page-break".
Accordingly I removed the tag from the template file ( RFT File). Now the request is getting Completed with Normal status. And generating the PDF output.
I found a hit in the metalink for this issue, which suggests a PATCH 4206181 (XDO.5.5) to get this functionality.
Accordingly the PATCH is applied.
Now when trying to query the template name from the XML Publisher Administrator Responsiblity, page is getting errored with the below message.
====================================================================
oracle.apps.fnd.framework.OAException: Message not found. Application: FND, Message Name: FND_VIEWOBJECT_NOT_FOUND. Tokens: VONAME = TemplateFilesForViewVO2; APPLICATION_MODULE = oracle.apps.xdo.oa.template.server.TemplatesAM;
     at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1223)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1960)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
     at oa_html._OA._jspService(_OA.java:86)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
     at org.apache.jserv.JServConnection.run(JServConnection.java:294)
     at java.lang.Thread.run(Thread.java:534)
====================================================================
Please do the needful in resolving the issue.
Thanks,
Abdul.

How to view the log/output output files in browser through email notification hyperlinks

I am working on an extension in Fusion Applications. The requirement is to send a notification with details of a concurrent program. The notification will have hyperlinks of "out" and "log" files. When the user clicks on the "out" hyperlink, it should open the Output file(that resides in the unix box) of the corresponding concurrent program in the browser. We know that in E-business suite R12 functionality, records should be populated in FND_FILE_TEMP table to view any files from unix box in browser.
Can you please let me know the approach to be taken in Fusion Applications?

The format of the start and end timestamp ranges are "MM/dd/yy HH:mm:ss" for example 12/01/09 12:00:00. Give this a try.
Thanks

Not able to view the excel output from eBS

Hi All,
I am not able to open the reports for the first time and this error is keep on coming everyday whenever i try to open any report for the first time.
     Microsoft office Excel cannot access the file 'http:// '. There are several possible reasons:
     The file name or path does not exist.
     The file is being used by another program.
     The workbook you are trying to save has the same name as a currently open workbook
But in the second time o/p opens without any issues.
Can you please let me know what will be the cause of the issue.
Thanks
Rajesh

What browser are you using?
If Chrome, try something else. Chrome works fine with help on the server but not locally. There is more in Snippets on my site about the Chrome issue.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

WHere Do I view the console Output for SAPJ2EE Server

In which file do i see the console logs for SAP j2EE 6.4
for eg in my servlet i write System.out.println("ABCD");
where do i see this output.

Hi Nilesh,
have a look at this thread:
Regards André

BOM - Standard report to view the material - BOM relationship

Hi
Our client has a requirement to view the material - BOM relationship. The input will be the material and the report should display all the levels above the material. Say for example if the material is in level 5, it should display the BOM strucutre from level 0 to level 5. If the same material is in various levels, the structure should map from level 0 to the lowest level of the material.
Is there any standard report/function available for the above requirement.?

Hello Venkatachalam
As eariler related to BOM level wise you posted a quiery on SDN ....
I having Similar quiery as per yours...... I need your help.
Is it possible for you to make a telephonic conversation so i may provide you proper details .
With Regards
DhruvOM
Phone number :-+919765032999

To view the concurrent request output in a custom form

Hi,
I have a requirement to view the concurrent request output from a custom form.
I can use the function "fnd_webfile.get_url " in a PL/SQL procedure and get the value for URL for the request output.
I am not sure how I can call this function from the form directly , ie not sure which library needs to be attached.
and also how to display the URL which has been obtained.
regards

Hi,
I used the below code in my form
l_url := fnd_webfile.get_url
file_type =>'request_xml_output' , --fnd_webfile.request_out,
id => req_id,
gwyuid => l_gwyuid,
two_task => l_two_task,
expire_time => 10 -- minutes, security!.
when I used fnd_webfile.request_out the form was not compiling and hence I passed the value 'request_xml_output'
Now no compilation error exists however how do I display the concurrent request in the screen.
I am not clear here, is there any function I need to use. I checked the FNDRSRUN form and there they have used
editor_pkg.report(req_id, 'Y');, I tried using it but no use.
regards
Maya

Scheduling a Report from outside Scheduler but viewing the output in Plus

We are using Discoverer 10.1.2
I know that we can schedule a report within Discoverer Plus and the resulting out put can be seen in Discoverer under scheduled work books
I am also aware that we put Discoverer command line commands in a DOS script and then schedule that script to run using an Enterprise scheduler and automatically export that report Excel.
What I want is to schedule reports using our enterprise scheduler but view the resulting output in Discoverer under scheulded work books
I was thinking that when we schedule a report Discoverer creates a package, something like EUL5_BATCH_PACKAGE080314170249.RUN;.
Once that package is created, if I copy it and rename it and then schedule to run from our enterprise scheduler, would I be able to view the output from Discoverer ?
----- Added on 03/15/2008-------
I did try running the above package EUL5_BATCH_PACKAGE080314170249.RUN from SQL Plus as I had indicated above. The settings on the report schedule were -
- Run immediately
- Never repeate
- Delete the results after 9999 days ( maximum allowed )
Now the first time the report ran automatically using DBMS_JOBS since I had set the report to run immediately.
After that when I tried running EUL5_BATCH_PACKAGE080314170249.RUN from SQL Plus, the procedure completed but when I looked at the Discoverer front end, it indicated the run was in error with Unique constraint violation on EUL5_BQ_TABLES.EUL5_BQT_UK_1 index. However when I looked at the table it did not have any data in it.
I the ran the procedure again from SQL Plus and this time it completed and when I looked at the Discoverer Plus front end, the results were ready for me to view.
When I tried running the procedure again, it failed again with unique constraint violation and when the procedure was executed after that it again ran and i was able to view the results.
So, ever alternate run from SQL Plus was successful. I would continue to try out different combinations of schedule parameters to see if I can get it to work.
However, any one has already tried this before please let me know if what I am trying Is this possible ?
Any help would be appreciated
Thank you
Message was edited by:
manav_purohit
Message was edited by:
manav_purohit

Thanks for the suggestion Rod. However, if I use DBMS_JOB.CHANGE, the report will still run using DBMS_JOB. What I would prefer is to not use DBMS_JOB.
Running anything in DBMS_JOB means, the job is not visible in the enterprise scheduler that we use. Our enterprise scheduler is being monitored at a data center and if any jobs fail, appropriate on call individuals are contacted. Records are kept of failures and root cause is analyzed. So I want to take advantage of these procedures for scheduled reports as well.
I am still looking for some alternative method.

Is the canvas something like "the final output"? Or is that the viewer?

I am making a video of my HD footage i shot with my Full HD Camcorder (Sony HDR-SR12).
When i go through te timeline and play something, it shows fully in my viewer, but in the canvas i get only a selection of the full image (it seems that it is zoomed in)... So, my question is, do i have to "make the video smaller" by choosing image+wireframe in the canvas? Because i am afraid that when i output on to a DVD, i will also get the zoomed-in video? Or is the Viewer the "final output?"... I am getting crazy, because i can't let two or more clips play after eachother in the Viewer, right?
Also, what is the best way to output my full HD footage? (without loosing to much quality) Just click "Export -> Quicktime Movie"? Wil quicktime not lose the HD? Thanx...

The canvas always displays the final result and quality of your editing in the current sequence in the timeline; the viewer is just a way to monitor single clips (not the composition of clips as in the canvas) and displays the quality of the clip usually before you edit it into the timeline.
This is important, because if (for example) your sequence (in the timeline) is a standard DV while your captured clips are HD, when you look at a clip in the viewer opened from the browser, you watch it at +HD quality+, when you drag (edit) the same clip into the timeline it is down-converted to the +DV lower quality+; and this is what you see in the canvas. Instead if you open a clip from the timeline (not browser) in the viewer, you see the exact same quality as in the canvas, but only for that single clip. So the best way is to always check quality in the canvas, since it shows the result of all your editing, conversions, and composition, as it will show up in the exported movie.
Now, to really verify the result in the canvas you must also make sure to:
- use Fit to Window (from the small zoom button on top of the canvas window) when you want see the full frame and its composition, but not the final quality
- instead use 100% (same button) to see the final quality for HD
- or even better connect the firewire output to an HDTV through a HDV deck (or camcorder) for HD, or to a standard TV through a D/A converter (or camcorder) for standard DV. The advantage of this solution is that you see the final result on the final output device while editing, without having to burn DVDs to check it (and this is almost mandatory when you import images and want to have control over interlacing artifacts).
When you export to iDVD you always use Export/Quicktime Movie even if you burn the DVD on different Mac; if the burner is on the same Mac you can uncheck the Make Movie Self-Contained option, so the file will be smaller and the export faster; otherwise you leave that option checked, and the file will contain all video and audio media necessary for burning (but the file much larger, and export much longer).
One more note: the Image+Wireframe option in the 2nd small button on top of the canvas (or also viewer) window allows you to apply changes to the frame size and position directly in the canvas without using the Basic Motion control of the viewer; in any case, whatever change you apply and you see in the canvas will be reflected also to the exported movie.
My guess in your case is that you are using a wrong (standard DV) setup for your sequence even if you captured HD, and that probably you zoomed in too much so that both the canvas and the exported movie show a small portion of the original frame.
I hope this helps a bit
Piero

How to view the sapscript result without directing to Printer

Hi All,
I am new to ABAP. can any one tell me how to view the sapscript output without redirecting to the printer from an abap program.
Help would be appriciated.
Thanks,
hima

There are several ways you can view the output of the SAPscript, without redirecting it to the printer.
1. You can directly view the output using Menu --> Utilities --> Printing Test --> give the default printer as LP01 and click Print Preview button, that should give you the print preview of the SAP Script.
2. You can execute the the driver program, if it is a custom program (Z program) then execute the program, it will give you an option of selecting printer,, give the printer as LP01 and select print preview.
lets say you are trying to view the purchase order "Zmedruck", the driver program for the same can be found using the transaction code NACE. or else you can execute the transaction code ME23N, There you will find a button called "Print Preview" Click that to preview your SAP Script. Menu --> GoTo --> Print Preview.
Similarly you will find options to view your sap script in almost all the standard transactions where you are using your SAP Script.
If you need further information,, give me a mail at [email protected]
if found useful, don't forget to reward points.
Thanks-
Shrikant

SAP WEBGUI - How to download the report output to Excel ?

Hi Folks ,
We have generated a report in standard SAP GUI 7.1 . But our requirement is to view the report in SAP WEBGUI and download as EXCEL .
We can view the report output in SAP WEBGUI , but could find an option to download as excel !
Is there any option in webgui ?
Please provide you valuable inputs !
Thanks.,
V.Rangarajan

Hi V.Ranjarajan,
Have you created an ALV report?
If yes, there are many ways to download the output to excel:
Go to Menu -> Export - > Local File... , local file button, etc.
In SAP CRM 7.0 there is a std functionality to even download search result list to excel.
Hope this helps!
Regards,
Saumya

JavaHelp 1.0 is required to view the JavaHelp output?????

Similar Messages

Maybe you are looking for