JavaHelp license and jh.jar

The following question was asked on April 16 in JAVAHELP-INTEREST:
"Can I embed Javahelp in the jarfile of my application, making it downloadable without accepting the Javahelp license."
The response was:
"Humm. Are you talking about the open source version (yes if your code is GPL) or the distributed version (no, but you can include the binary
distribution (jh.jar) without any problem)?"
The follow-up response was:
"My project (edumips64 -> www.edumips.org) is a GPL project.
I'd like to include binaries of javahelp inside my jarfile: is it possible to
do so?
I didn't do it because I know that sun requires you to accept an agreement before downloading Java, and javahelp had a similar agreement when I tried to download it."
My open source project is currently in a similar situation and I was wondering what the answer is to the last question. Can we, for example, include jh.jar within our project making it downloadable without accepting the Javahelp license?

using "Google" , www.google.com <- put this in the address box and press enter
I found: http://www.uml.org.cn/j2ee/j2ee060401.htm
on that page I found a link: ftp://ftp.software.ibm.com/software/data/cloudscape/free/cloudview406.jar
and
ftp://ftp.software.ibm.com/software/data/cloudscape/free/jh.jar
But I didn't test them.

Similar Messages

Licensing and costs for Creative Cloud for teams on small company

Hello,
I have a few questions regarding the teams solution. They are:
1- Is the license by user or by computer?
2- What is the actual cost of Creative Cloud for Teams ( small companies with less than 100 employees). In some sections it states monthly cost of 69,99€ while others state 49,99€.
3- Assuming the monthly cost of 69,99€ does this cost covers all products listed ( ilustrator, photoshop, dreamweaver, premiere,...) for a single user or is that the cost per user and per product?
4- How long do I have to keep the contract? Only 1 year? If I want to cancel when should I communicate? or I just need to set on the console 0 users?
5 - Assuming I have only one creative user can the admin console be installed in a different machine (e.g. network admin) without the need of an extra license?
6 - If I acquire 1 license and decide to drop it 1 year and 1 month after will I pay 1 year plus that month or do I need to pay the 2 years?
Thanks for your feedback,
Regards,
Pedro

Hello,
I have a few questions regarding the teams solution. They are:
1- Is the license by user or by computer?
2- What is the actual cost of Creative Cloud for Teams ( small companies with less than 100 employees). In some sections it states monthly cost of 69,99€ while others state 49,99€.
3- Assuming the monthly cost of 69,99€ does this cost covers all products listed ( ilustrator, photoshop, dreamweaver, premiere,...) for a single user or is that the cost per user and per product?
4- How long do I have to keep the contract? Only 1 year? If I want to cancel when should I communicate? or I just need to set on the console 0 users?
5 - Assuming I have only one creative user can the admin console be installed in a different machine (e.g. network admin) without the need of an extra license?
6 - If I acquire 1 license and decide to drop it 1 year and 1 month after will I pay 1 year plus that month or do I need to pay the 2 years?
Thanks for your feedback,
Regards,
Pedro

By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and is it possible to install it on both Windows and Apple(if it comes with two licenses)? Thank you.

By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and if it does, is it possible to install on both Windows and Apple's OX? Thanks.

A Cloud subscription provides for installing working installations on two machines. You can have mixed operating systems (both Windows and Apple's OX).

I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Y

I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite. Please help!

Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.

How do I integrate Configurator and iPad Electronic Flight Bags with applications that utilize a third-party license and subscription that is outside of iTunes?

I am the EFB (Electronic Flight Bag) Manager for a small aviation company that are using 10 iPad with Retina Display as approved in-cockpit EFBs. Our plan is to configure and manage these iPad EFBs with Apple Configurator 1.3. We also use 2 third-party applications for charts, aviation weather, and other aviation functions that depend on a seperate license and subscription with the vendor outside of iTunes. What I am finding through my new education in Configurator is that there does not seem to be a way to maintain the subscription status with those two applications. Is there a way to isolate those two programs from Configurator control? Better yet, is there a way to integrate them with Configurator without losing the subscription status and loss of huge amounts of data that are on a regular, FAA regulatory update schedule? Configurator is awesome at managing iTunes managed applications and is perfect for our company. I need to figure out how to make Configurator work with a subscription-based application. Please help!

Here is what is surmise reading ForeFlight web site.
There is the app and the data.
You manage the app through configurator or some other MDM. The acquiring and paying for the data is independ of the configurator. You can buy the data through the app or online. You may want to buy online. This way you can do the buying independent of the ipad. Once you have purchased, the app will download the data. You may have to tell it to procedure with download panel.
Some people use configurator to install mdm app then do the rest of the configuration from MDM. This allows wifi updates of configuration.
You end up with managing apps from MDM. You manage with your data from from the online account. You enter appropriate password on each ipad to gain access to the data. App will download your data. My need to tell it what to download in app.
How do I buy a subscription?
Purchasing a subscription is fast and easy! You can purchase a subscription online or inside the app using your iTunes account.
To purchase a subscription inside the app, launch ForeFlight Mobile and then tap the 'Account' icon. You'll see a list of available plans to purchase in the 'Subscription Plans' table. Tap the one you want to buy. Follow the instructions for entering your email address and iTunes password. When the purchase is complete, you'll receive confirmation inside the app and immediately be able to continue using ForeFlight Mobile.
To purchase a subscription online, visit our secure online ordering page. You'll be asked to choose a plan and enter your credit card information. After your purchase is complete, you'll receive an email with a password to sign into the app on your phone or iPad.
http://www.foreflight.com/support/subscription#66
How do I update charts, plates, and the airport database?
ForeFlight Mobile has a download manager designed to make selecting, downloading, and updating your data easy- whether you like to store a little or a lot. Tap the Downloads icon from within the ForeFlight Mobile app. The Download Manager allows you to select the types of items you want to download and store on your device. ForeFlight Mobile will contact our servers and display the available updates. If you download updates that are not yet effective (future data sets) they will automatically be used by the software when they become effective. The download manager lets you pause a download and resume it later.
http://www.foreflight.com/ipad/faqs/#11

Splash screen with progress bar and multiple jar files to load

Hello,
I have been looking to the new features in java 6 for splash screens. I haven't implemented this never before and i was wondering how i could do the following with java 1.5 or 6:
I would like to see a splash screen with a progress bar that "grows" when every jar file has been read.
At this time i call my application like this from a shell script:
exec "$JAVA_BIN" -Djava.library.path=$LIBRARIES_J3D -classpath xxxx.jar yyyy.jar zzzz.jar ...
where xxx.jar, yyy.jar and zzz.jar are very heavy jars.
So i would like to see in the progress bar 33% 66% and 100% when they are loaded.
I do not know if this is the right forum to ask for this. If no, please point me which would be the ideal one.
Any help will be very useful. Thanks to all!

Am 10.07.2015 um 07:17 schrieb Lalit Solanki:
> Hi friend,
>
> I am create pure eclipse E4 application and trying to splash screen with progress bar and message.
>
>
>
>
> but above image in only support eclipse E3 application so pleas help me how to add progress bar and message in eclipse E4 application
>
Hi Lalit,
there's a Bug entry: https://bugs.eclipse.org/bugs/show_bug.cgi?id=382224
Meanwhile you can use this solution:
https://www.eclipse.org/forums/index.php/t/328812/5ceed4bcaa683a94d65efb161bffd217/
Regards,
Ralf.

Sales order -Tax Exemption License and Excise duty Tabs In IDEAS

Dear Team,
Kindly anyone explian me wat are the importance of the Tax Exemption License and Excise duty Tabs In sales order - IDEAS, ECC 6.0.
Please explain me how to maintain currently it is in greyed mode how to maintain and what is the importance of the said tabs.
Regards
abhi

No answers

I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

Yes, gladly. I am trying to install on a 13" MacBook Pro with OS X 10.8.3. I insert the disk into the SuperDrive. The I work '09 window pops up with two icons: one Tim install and one that says "Read before you install iWork." I double-click on the "Install iWork '09" icon, and a window appears that says, "This package will run a program to determine if the software can be installed." I click "continue" and see "Welcome to the iWork '09 installer." I click on "Continue." The "read me" bullet on the left lights up, and I see "Read before you install. . . ." I click "Continue," then see the software license agreement. When I click on "Continue" again, I am asked to agree, and I do. The window then says, "Standard Install on 'Mackintosh HD" and indicates how much space the program will take.
I click "Install," enter my password, and the installation begins. It goes through a validating phase and begins "writing files." It indicates that installation will take about 30 minutes (although that number fluctuates). After about four minutes it goes to "cleaning up." Then after just a few seconds, the "Summary" bullet on the left lights up and this message appears: "There were errors with the installation. You may want to try installing again." There is a large yellow triangle with an exclamation point in it, and a bold "The installation failed." Below that appears "The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."
At that point, a "Close" button is pulsating blue at the bottom of the window.
Sorry for the tedious detail. Anything revealing there?
Thanks!

How to get to screen where agree to license and continue in installing acrobat 9 pro on a macbook pr

how to get to the screen where request ot agree to license and continue in loading acrobat 9 pro on macbook pro?

Hi feivey
Go to Help->Activate -. Put your Serial key to activate

Third-Party Licensing and Activation Toolkit for Labview 8.5

There is any Third-Party Licensing and Activation Toolkit for Labview 8.5 as LV2010. PLS help..
Solved!
Go to Solution.

I know what you are asking and in the other thread, you were told it was for 2010 only. There is some support for 2009 but not for your old version. Go with the dongle suggested or upgrade your version of LabVIEW.

IVL License and validity date

Hello Experts,
How do you apply an IVL license to a sales order that was placed before the validity date of the license?
The business scenario that I have is a sales order was placed in September, and it required a license. We applied for the license and recieved it recently and the validatity date is December 2010 thru December 2011. The license was maintained in the system as such, but the license will not apply to the order since it was placed prior to the stated validity of the license because the document reference date that is being used is the date the order was placed. Is there a way to account for this without having the sales rep replace the order so the document reference date is inside the validity date of the license recieved from the government?
Regards,
annm

hi
In your GTS system go to Transaction- /n/SAPSLL/LCD_CHANGE and delete the existing license from the existing order.
Then go to transaction- /n/SAPSLL/CUHD_MR_EXP and check boxes of "Display Log" and Save Log" and execute it with order number. New license will be assigned to it but make sure you have maintained the correct license determination strategy for it.
Thanks
DG

Including a .jad and a .jar file in presentations

Hi:
I did an application using the last version of the Sun Java Wirelless Toolkit 2.5. And now I have a .jad file and a .jar file. I need to include both in a power point presentation to be able to show the application. I dont want to do a link because I'm not gonna use my computer to do the presentation. Do I need to do something special in the deployment step to be able to do this ?
I have tried to include the program this;
Insert --> Object
But it doesn't work.

Hey listen what you want to do is possible but not in the way you want to do...
if you want to demonstrate the functionality of your application or how it works then you can use use
any screen recording software such as: Screen Recorder Gold, Qarbon's Viewlet Builder or ViewletCam
such software help you to record the activity of screen then you can export the recorded screen shots to multiple formats and include them to your PP presentation...

Standard.jar and jstl.jar directory

First off I probably should apologize in advance because my problem might be an eclipse config issue.
I created a simple servlet and I tried to include a jstl library import javax.servlet.jsp.jstl.sql.Result;. It compiled cleanly but, when I ran the application (through a browser accessing tomcat through eclipse) I was getting this error...
The absolute uri: http://java.sun.com/jsp/jstl/core cannot be resolved in either web.xml or the jar files deployed with this application
I eventually found out what was wrong but I don't understand why it was wrong and that's my question. Originally I had jstl.jar and standard.jar in the projectHome/lib directory. When I moved those 2 files to the projectHome]/WEB-INF/lib directory, however, things ran correctly. Is this a setting somewhere within my tomcat config on eclipse perhaps? Or can someone point me in the right direction about this issue in general?
Thanks in advance!

Tomcat and Eclipse have different ideas of classpath.
In Eclipse you set the classpath as part of the project properties: Java Build Path.
Tomcat uses:
- web-inf/classes directory
- jar files in web-inf/lib
- jar files in /shared/lib
- jar files in /common/lib
So in order to run on Tomcat, they need to be in the web-inf/lib directory.
Cheers,
evnafets

Did not complete ugrade to Mountain Lion.Obtained license and personal id but was called away fro Mac for an emergency. Please advise how I can handle. Mountain Lion is

Hello, I was in the middle of upgrading to Mountain Lion when I was called away from computer. Three one hours phone calleover cyber monday went unanswerd. Have License and ID. Please advise how to finish transaction.
g

Mac App Store: How to resume interrupted downloads

Files missing in the ear and client jar

Hi,
I'm following the examples to build a web service using ANT servicegen task. My
web service calls a lot of other java classes, and those java classes in turn
call other classes. When I used the following taskes to generate the service and
client code, I found the generated ear, war and client jar files only contain
the compiled classes which are used directly by the web service class. Those classes
called indirectly by web service are missing.
<target name="ear">
<servicegen
destEar="${build}/${ear_file}"
warName="${war_file}">
<service
javaClassComponents="com.iit.integration.txlife.txlife28.txlifeProcessor.TxlifeProcessor"
targetNamespace="${namespace}"
serviceName="TxlifeWebService"
serviceURI="/txlifews"
generateTypes="True"
expandMethods="True">
<client
packageName="com.iit.integration.txlife.txlife28.client"
clientJarName="${client_jar_file}"
/>
</service>
<classpath>
<pathelement path="${build}"/>
<pathelement path="${java.class.path}"/>
</classpath>
</servicegen>
</target>

<target name="client" depends="ear">
<clientgen
ear="${build}/${ear_file}"
warName="${war_file}"
packageName="com.iit.integration.txlife.txlife28.client"
clientJar="${client}/${client_jar_file}">
<classpath>
<pathelement path="${build}"/>
<pathelement path="${java.class.path}"/>
</classpath>
</clientgen>
So when I invoked the client code, I always got the class not found exception.
Not sure if I missed anything here.
Thanks a lot,
Henry
[build.xml]

Any required support classes have to be in the client's/server's classpath. Or
at least that's what I do.
"Henry Niu" <[email protected]> wrote:
>
>
>
Hi,
I'm following the examples to build a web service using ANT servicegen
task. My
web service calls a lot of other java classes, and those java classes
in turn
call other classes. When I used the following taskes to generate the
service and
client code, I found the generated ear, war and client jar files only
contain
the compiled classes which are used directly by the web service class.
Those classes
called indirectly by web service are missing.
<target name="ear">
<servicegen
destEar="${build}/${ear_file}"
warName="${war_file}">
<service
javaClassComponents="com.iit.integration.txlife.txlife28.txlifeProcessor.TxlifeProcessor"
targetNamespace="${namespace}"
serviceName="TxlifeWebService"
serviceURI="/txlifews"
generateTypes="True"
expandMethods="True">
<client
packageName="com.iit.integration.txlife.txlife28.client"
clientJarName="${client_jar_file}"
/>
</service>
<classpath>
<pathelement path="${build}"/>
<pathelement path="${java.class.path}"/>
</classpath>
</servicegen>
</target>

<target name="client" depends="ear">
<clientgen
ear="${build}/${ear_file}"
warName="${war_file}"
packageName="com.iit.integration.txlife.txlife28.client"
clientJar="${client}/${client_jar_file}">
<classpath>
<pathelement path="${build}"/>
<pathelement path="${java.class.path}"/>
</classpath>
</clientgen>
So when I invoked the client code, I always got the class not found exception.
Not sure if I missed anything here.
Thanks a lot,
Henry

JavaHelp license and jh.jar

Similar Messages

Maybe you are looking for