JavaHelp show under current window
Hi,
I am trying to use JavaHelp (version 2.04). If I press F1, it works. But if I press a JMenuItem, the help system shows, but under the current window. The current window is a modal dialog, I can not bring the JavaHelp window on the top.
How to fix this problem?
Any information would be appreciated. Thanks in advance.
THANKS FOR YOUR REPLY,
IT IS WORKING WHEN IT IS IN SEPERATE WINDOW BUT NOT WHEN I AM USING IN FRAMES. HOW TO CLOSE ONE OF THE WINDOW IN FRAMES. WAITING FOR REPLY.PLZ URGENT
REGARDS
Similar Messages
-
DC not showing under "Network" in Windows Explorer of member server
Hello Community
After spending an endless amount of time trying to create SharePoint Server farm
and seeing an error message stating that I could not connect to the master, I found
that that was not the problem at all.
The farm has Windows 2008R2 Server dc (Server1) and Windows 2008 Server member server
(Server2).
If I go into Windows Explorer and click "Network" on the Windows 2008R2 Server
dc (Server1) the Windows 2008 Server member server (Server2) is visible.
But if I go to the Windows 2008 Server member server (Server2) and click "Network"
I do not see the Windows 2008R2 Server dc (Server1) it is not visible.
I figured that since Server2 showed under "Network" I would be able to map a network
drive to Server2. But when I tried to map the network drive I got the following error
message:
"\\Server2 is not accessible. You might not have permission to use this network
resource. Contact the administrator of this server to find out if you have access
permissions."
However, after a waiting a looong time I was able to do the opposite by
mapping a network drive from Server2 from Server1.
But that doesn't solve the problem because Server1 still doesn't show under
"Network" on Server2 which is what is needed. It only mapped to the C:\ drive on Server2,
which is what the server farm needs.
I am admin on both servers.
The firewall is off.
Both servers are obviously in the same domain.
How can I get Server1 to appear under "Network" on Server2?
Thank you
ShabeautHi,
Based on my experience, if your computer is connected to a network, you can see all of the computers and devices that are currently part of the network in the Network
folder.
Please make sure the DC and server2 are in the same network and network discovery setting is set to open on both of the computers.
In addition, did you have other member servers on the same network? If yes, can you see them list in the network folder on server2?
I also recommend you to ping the DC on server2 to make sure the connectivity between them.
Best regards,
Susie -
Photoshop CC2014 running under window 8.1. How do I access mini bridge. It does not show under FILE or WINDOW-EXTENSIONS. Works ok with CS6
Photoshop: Spring Cleaning | PHOTOSHOP.COM BLOG
-
I need help from some Apple people. I have an iPod Touch and I wanted to load it up with some fresh music but I currently don't have a PC. I found an app that would allow me to connect to my 2TB network drive directly and I was able to transfer a bunch of music files to the iPod. Unfortunately, these new files do not show under the Music app and I can't seem to find any way to convince the iPod that they are music. I can play them through the file manager only. Android doesn't have this problem, any music I put on my phone is recognized as music and can be played through any of the music apps. Am I missing something or is Apple to inflexible to handle this?
You can't. The only way to get songs in the Music app is to sync from a computer or to download from iTunes.
-
how can I sync my Apple ID to my iTunes store sign-in window? An old ID keeps showing in the iTunes sign-in window and I cannot get rid of it to show my current Apple ID. I don't have the password for the old ID in order to "manage" my account and make changes. Help. Thanks.
Did you create a new account or did you update your existing account with a new email address ? You can tap on the id in Settings > iTunes & App Stpre and sign out of it and you can then sign with the new/updated account.
If you did create a new account then your existing content will remain tied to your old account, so only that old account will be able to redownload that content and/or download updates to its apps. If you can't remember the password for it then you can try getting it reset via this page : http://iforgot.apple.com -
I have noticed a problem on FF4 when browsing sites that open pop-under windows on a user action. With all other browsers (including FF3) these open underneath the main window, but on Firefox 4 they open over the top - acting as pop-ups and not pop-unders.
While pop-unders are annoying, it is even more annoying to have them keep appearing as pop-ups instead.
I have run some tests and the following code successfully opens a pop-under on all browsers except Firefox 4.
It appears that window.focus() is not correctly bringing the current window to the top.
Example code:
var w = window.open('http://www.mydomain.com/', 'mywin', 'width=400,height=300,toolbar=1,menubar=1,resizable=1,scrollbars=1');
if(w){
w.blur();
window.focus();
}This is normal. Firefox 4 has disabled the default "window flip".
- go to adress about:config
- accept and search dom.disable_window_flip set to false;
And popunder, blur/focus javascript function will be back ;) -
When I open a new window, the current window is closed. I would like to keep the current window and open the new window without losing my current window. I checked "Open new window in a new tab instead" under tabs
== This happened ==
Every time Firefox opened
== Noticed yesterday, June27, 2010i just went into preferences, deleted what was in the home page, and entered a new home page address which solved the problem,
-
I'm using Windows Illustrator CS4, and i cant find the artboard menu pallate. Its not showing under Window Dropdown menu either. How can i locate it or toggle it to turn on again?
I'm not sure what artboard view is, sorting and naming artboards is not available in CS4 either, sorting however is possible via script workaround,
Introducing: re Arrange Artboards v2 Script -
Why doesn't my TestStand deployment installation show up under my Windows start menu of my target machine?
I have successfully installed working deployments to target machines. However, I was expecting to see the installation listed as "My TestStand System A" in my start menu, but it is not. Am I misunderstanding something here?
Also, if I peform a different second deployment to the target station like "My TestStand System B", all of the LabVIEW files from my previous installation for "My TestStand System A" disappear from the target directory (c:\Program Files\My TestStand System A).
I am using TestStand 4.2.1 Professional on the development station with Windows XP and LabVIEW 2009.
Solved!
Go to Solution.Thanks Paul,
That solved my second problem and inspired me to search deeper for the answer to my first problem. The answer is in the "Distributed Files" tab, "installer properties", "Create a Program Item" checkbox:
Wouldn't it be nice if this was automatically checked by default for the main sequence files? Wouldn't it also be nice if "Upgrade Code" was automatically regenerated by default whenever we saved the *.tsd file under a different name?
Thanks again,
Eugene
Message Edited by Eugene12 on 05-06-2010 04:27 PM -
Rdp on iPad only shows current window
Hi All,
I have a customer with Windows XP configured to support RDP (Remote Desktop Protocol) connections. He can access this machine from several Windows computers through MSTSC (M$ Terminal Services Connector) and I can access it from Linux with rdesktop.
Problem, on his iPad, with either this RPC client
https://itunes.apple.com/us/app/rdp-remote-desktop-connection/id529509413?mt=8
or M$'s Remote Desktop, I can connect perfectly. Problem: the only thing that shows is the current windows that is in focus. You can open up menus and buttons from inside the current windows, but you can not operate things outside the current
windows. You can't even see them.
What a huge annoyance. You have to go to a Linux or a Windows computer first, open what you want to be seen on the iPad, log out of Windows or Linux client, then log back in with the iPad client. And, hope that is all you want to do on the remote
machine. You can not even work the stinkin' start button!
Can this be fixed?
Many thanks,
-TFigured it out. It has to do with knocking some else's session (someone/where else is logging with RDP and you knock them off). It is reproducible across all platforms. You just have to exit the window that is in focus and you
get the desktop back. No small feet, especially if iPad tapping the in focus window's "X" decoration does not work.
Thank you all for the help! -
Firefox opens new windows under the current window
Whenever I right-click on a link and tell it to open in a new window, the window opens behind the current window. I have selected "When I open a link in a new tab, switch to it immediately". That used to solve this problem but seems to have stopped working.
I have read all the threads on this problem, including the one saying it's caused by Flash.
However, I have checked in safe mode and I still get the same problem.
This started happening around Christmas on three computers. Since then, because of problems getting a driver to install for a new peripheral, I have done a fresh install of Windows 7 64 bit, reinstalled FF newest version and restored my profile, but get the same problem. At this point I have started in the FF safe mode which should disable all the add-ons, but the same thing still happens. I have also reset FF using the reset option in the help menu. It doesn't always happen, but it can happen when flash is already running in another window.
Are there a series of steps I can take which will verify that the fault is caused by Flash? I had thought the safe mode would do that.
Honestly, this is enough of a problem to make me switch browsers, and I don't even like any of the other browsers. If you can offer any other suggestions I would really appreciate it.Safe Mode actually doesn't disable Flash. It's a little confusing: it disables extensions, but not plugins, so "Restart with Add-ons Disabled" is really not a very good description.
If you want to test with Flash disabled, you can set it to "Never Activate" temporarily. Open the Add-ons page using either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column that lists the categories, click Plugins. You're looking for "Shockwave Flash." Change it to "Never Activate."
You can keep this tab open during your testing. If you close and re-open the Add-ons page, Shockwave Flash will fall to the bottom with the other disabled plugins. -
Content open up in the current window
When I add content in the content area but when I click the link it opens up in the current window
s oppose to if it had been URL Link there is an option to open up in current window.
As I was searching in metalink I found somebody from Oracle had posted this :
### What were you trying to accomplish when the problem occurred? ###
Author : Jerry Silver Type : N/A
Date : Jun 6, 2001 11:22 PT
Here's a solution for Portal 3.0.8 or later that allows you to open a file in
a new browser window. It requires that you create a custom item type, and use a
procedure to display a link to the file.
1. Create the following procedure. You can create it in any schema, but the
schema has to have select privilege on the view 'WWSBR_ALL_ITEMS' in the portal
schema. In this example, the portal schema is PORTAL30. If you're running
version 3.0.8, you'll also need to apply the patch to bug 1724250.
Create or Replace PROCEDURE OPEN_FILE (p_itemid IN NUMBER) as
fileURL varchar2(1024);
baseURL varchar2(256) := '/pls/portal30/docs/';
begin
select baseURL | | filename into fileURL
from portal30.wwsbr_all_items
where id = p_ItemId;
htp.p ('Open File');
EXCEPTION
when NO_DATA_FOUND then
htp.p('Document not found or access denied');
when others then
htp.p(sqlerrm);
end;
The procedure generates a link to the item filename with a target of "_blank",
which opens the file in a new browser window. Replace the baseURL attribute
value with the correct Database Access Descriptor (DAD) and Document Access
Path ("/docs") for your site.
2. Grant execute on the procedure to the portal public schema. The name of this
schema is <portal schema>_PUBLIC. So if your portal schema is PORTAL30, grant
execute on the procedure to PORTAL30_PUBLIC.
3. Create a custom item type, using the base item type of "File". I recommend
that you create the type in the Shared Objects content area, so it can be used
in other content areas (from the Navigator, go to the Content Areas tab, select
Contents for Shared Objects, Custom Types, and Item Types - Create). Edit the
Text continued in next action...
new type and go to the Procedures tab.
4. In the Procedure Call Properties, enter:
Type: PL/SQL
Procedure Call: <your procedure schema>.OPEN_FILE
Link Text: Open File (it doesn't matter what you put here - it only displays if
"Display Procedure Results With Item" is unchecked.)
Check "Display Procedure Results With Item"
5. Under "Pass Attributes as Parameters", enter:
Attribute: Item Id
Pass As: p_itemid
(Notice how you can pass most of an item's attributes to a procedure. You can
take advantage of this feature to write procedures that give you precise
control over the rendering of your items).
6. In the properties for the content areas in which the new type is to be used,
go to the Items tab. Specify that you want the new type to be visible. You may
want to hide the base File item type, so users won't be confused by two
different item types for files.
7. Edit the folder style for the content area. Go to Folder Layout. Edit the
region properties for each region in which you will be using the new item type.
For each region, replace "Display Name or Image" with "Display Name". "Display
Name or Image" will render the Display Name as a link to your file that opens
the file in the same browser window. "Display Name" simply renders the display
name as text, with no link.
8. Now you can create items of the new item type. Each item's Display Name will
appear next to a link that says "Open File". Clicking the link will cause the
file to open in a new browser window.
Hope you find this useful.
But after doing this the issue with this still I am able to see this as link on the page but when I
click on it opens up in current window. But when I click on the header bar that
displays Content Area name then it takes to the content are manager. Here there is
a link that shows OPEN_FILE link and then it opens up in a new window.
But I don't want user to go inside the content manager to see the content to open up in a new window.
I want this same functionality to be there on the page rather then in the content area navigator
Thanksfuscia wrote:
stonecrest wrote:sh -c "cd %f && urxvt"
can't help being ignorant: what is that?
A shell script for entering the working directory and launching urxvt.
Try it and see if it actually works.
I think I tried something like that but wasn't successful...
Last edited by moljac024 (2008-09-26 12:28:43) -
Downloads are not showing up in window. Can someone help? Thank you.
Just recently, downloads are not appearing in the Download window.
Under "Tools/Options"...
"Show the Downloads window..." is checked.
"Save files to" ( C:\Downloads ) is checked.Check a setting: ''Firefox button > Options > Options (or Tools > Options) > Privacy, '''check''' "Remember download history"''
*See --> https://support.mozilla.org/en-US/kb/Options%20window%20-%20Privacy%20panel
I you want to keep download history, do not clear in when using Clear Recent History or when automatically clearing history when Firefox closes
*See --> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History
*If you use a cleaner application, like CCleaner, check your settings (CCleaner has an option to clear Download History).
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Consider upgrading Firefox to the current version 10.0.1. Your version is 8.0.
*See --> https://support.mozilla.org/en-US/kb/Updating%20Firefox
You can get the incremental update by doing the following in Firefox: Help > About Firefox > Check for updates
You can download the full installer, SAVE it to your desktop, exit Firefox (Firefox button > Exit or File > Exit), then click/double-click the installer you just downloaded to update the version installed on your hard drive. This assumes that you only have one version installed in the default location on your hard drive and have not performed a "Custom" installation to another location on your hard drive.
*Full installer: https://www.mozilla.org/en-US/firefox/all.html
*Also see --> http://support.mozilla.org/en-US/kb/Installing+Firefox
*Also see --> https://support.mozilla.org/en-US/kb/Updating%20Firefox
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*'''''Shockwave Flash''''' (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox] -
CD does not show under Devices on iTunes
I am a new user and would appreciate any suggestions. My iPod shows under Devices on iTunes, and I've had no problem buying music from iTunes store or loading to iPod.
I have set iTunes to be the default player of music cds but they do not play when loaded (iTunes opens) and the CD does not show under Devices.
Thanks in advance for any help.
HP dv6110ca Windows XPI did run the diagnosics before, and have just run again. As you will see it passes with flying colors - but still is not recognized as a device on itunes......
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Hewlett-Packard HP Pavilion dv6000 (RN907UA#ABL)
iTunes 7.0.2.16
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.1
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.6.1),
Video Driver: NVIDIA GeForce Go 6150\GeForce Go 6150
IDE\DiskST98823AS______________________________7.24___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomPHILIPSDVD-RAM_SDVD8821________________EH19___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
E: PHILIPS DVD-RAM SDVD8821, Rev EH19
Audio CD in drive.
Found 14 songs on CD, playing time 72:11 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:13:25
Track 3, start time 09:58:02
Track 4, start time 14:37:60
Track 5, start time 20:31:35
Track 6, start time 25:38:35
Track 7, start time 31:37:27
Track 8, start time 35:21:52
Track 9, start time 41:56:50
Track 10, start time 47:36:50
Track 11, start time 52:54:27
Track 12, start time 58:11:12
Track 13, start time 63:52:55
Track 14, start time 68:20:05
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 10 16 20 24.
The drive CDRW speeds are: 10.
The drive DVDR speeds are: 10.
The drive DVDRW speeds are: 10. -
I have an old Ipod that won't show up on Windows Explorer but shows in Itunes., I have an old Ipod that won't show up on Windows Explorer but shows in Itunes.
In iTunes, select the iPod in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab.
There should be a checkbox that says Enable disk use. Check it and Apply the change. It should now appear in Windows, when the iPod is connected.
NOTE: When Disk Use is enable, you have to eject the iPod (in iTunes) before physically disconnecting it from computer.
Maybe you are looking for
-
DMEE : how to make parent node disappear when child node is empty
Hi Friends , Currently i am working on DMEE , I have a problem . When Child node is empty I donot want the parent node to appear in the tree.Here I am uisng a field via exit function module for childnode. so not a fpay* strucutre field to write a con
-
Is there any Vi for getting the CPU and Memory usage of the Local as well as Remote System
Is there any Vi for getting the CPU and Memory usage of the Local as well as Remote System
-
Missing javaws in linux amd64 jdk1.6.0_03 ?
Hello, Is it me, or there is really no javaws in jdk1.6.0_03 for linux amd64? Thanks. M. Manese
-
Hi Gurus, my rman backup has failed, i have not issued any log file for rman. Does the rman creates any alert log file. If yes, where it is created whether in target database or catalog. Thanks Shaan
-
HT3275 Why do I keep getting this error message?
The backup disk image "/Volumes/Data/Kari Romero's MacBook Pro.sparsebundle" is already in use. Any help would be appreciated!