JavaMail supports SSL: True or False?
Hi Guys, this is my first time here. :)
Btw, I have questions:
1. Does JavaMail really support SSL or not from the original package? Cause from the FAQ, They said it's not. But i've read some examples where there is a class imported from javax.net.ssl.SSLFactory kind like that. So my question is, is it really supported?
2. I want to create a program that sends email with or without SSL. Is there any simple "if" block that distinctively differentiate from SSL connection with the standard one? What i mean is something like this.
boolean isPOPSSL;
Properties prop = new Properties();
if(isPOPSSL)
//SSL Connection
prop.setProperty( //set Properties for SSL);
else
//SSLless connection
prop.setProperty( //set Properties for standard connection);
}Can somebody explain what thigs should I put inside the "if" body there?
3. Is it true that SMTP server doesn't need any SSL encryption because thre's already a TLS in SMTP Protocol?
Thanks for your attention. :)
1. Does JavaMail really support SSL or not from the original package? Cause from the FAQ, They said it's not. But i've read some examples where there is a class imported from javax.net.ssl.SSLFactory kind like that. So my question is, is it really supported?Yes, SSL is fully supported.
Where in the FAQ did you read that SSL was not supported?
Did you find the file SSLNOTES.txt that's included with the JavaMail download?
2. I want to create a program that sends email with or without SSL. Is there any simple "if" block that distinctively differentiate from SSL connection with the standard one?The simplest approach is to choose the protocol name based on whether you want SSL or not:
if (isSSL)
prot = "smtps";
else
prot = "smtp";
props.put("mail." + prot + ".host", mailhost);
...The smtpsend.java demo program illustrates this approach.
3. Is it true that SMTP server doesn't need any SSL encryption because thre's already a TLS in SMTP Protocol?There are two approaches for using SSL:
1. Connect on a socket that uses SSL right from the beginning. This is what the "smtps"
protocol does.
2. Connect on a plain socket, then switch to SSL (aka, TLS). This is what the "STARTTLS"
command does. You can enable use of this command by setting an appropriate property.
See the com.sun.mail.smtp package javadocs.
Some servers will support one approach, some will support the other, some will support both.
Similar Messages
-
hello Friends ,
I read some disappointed news on this forum
that sun would not continue support for intel edition
i donot know it is true of false
Any tell me what is exact matter on
following email :- [email protected]
or reply this letterCross-posted
Sun Solaris 5.10 - SSH 1.1.3-Not able to connect to server with ssh -Urgent
@O.P.
Don't do that.
In the future, pick the most appropriate forum and make your post.
Cross-posting is considered to be the same as rude spamming.
I'm not aware of any forum web-site-of-value that would encourage cross-posting in its etiquette guidelines.
... and as far as "Urgent" goes?
This web site is for the end-user community to gather and discuss various topics in general conversations. Your self-imposed time pressures are irrelevant. If you need actual technical support for something, then log a support case and pay for a speedy answer.
See the FAQ link at the top of the page. -
All,
In my Form_Load module, I use For Loop to get data from Microsoft Access database to the texbox and that works fine. The problem I have is that there is one column with True/False condition in the access database and I would like to know how to check
if it is set to True or False.
In the For Loop I use something like this for the textbox:
Textbox1.text = row.cells("columnname").value.tostring()
How do I check the column with the True/False condition
VS 2008
OS: XP
Thanks,
LA_Bob
Hello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses the usage issue of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
I am moving your question to the moderator forum ("Where is the forum for..?"). The owner of the forum will direct you to a right forum.
If you are doing your code using visual basic, Visual Basic forum within Visual Studio Language Forums:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=vslanguages may help you.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Does WLS 5.1 support SSL session reuse?
Does WLS 5.1 support SSL session reuse?
I noticed in an earlier post that WLS 4.5 doesn't. It this also true for 5.1?Does WLS 5.1 support SSL session reuse?
I noticed in an earlier post that WLS 4.5 doesn't. It this also true for 5.1? -
Lot of returns on Playbook according to Futureshop tech. ? True or False ?
Hi,
I'm in Quebec city,
According to a FutureShop tech. "1 of 2 Playbook sold are returned " ? "A lot more than other tablet"...
True or False ? 50% ?
What are the reason of return ?
He also told me "Playbook hardware is cheap"...
I don't think so, I think that RIM is making good product.
His friend, who work at BestBuy as seller, says the same.
I'm the proud owner of a PlayBook, never had problem, and I don't hesitate to recommend it to my friends.
So what's the truth ? Thanks.Ha, you are not alone. I am annoyed by RIM-bashing also.
It seems a popular sport of late, but as is usual, it normally comes from those immature people with some other inadequacy in which they feel putting another down makes them feel greater.
But I am also annoyed by mosquitoes and arrogant people the same, and 10,000 years, nothing has kept either from multiplying.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Applescript help with true or false script
I'm in need of a applescript that will run two different scripts based on the outcome of an existing file.
I have a folder called Status. Inside this folder is a simple text file called Good.rtf
I would like a script that would run one or the other script base on the true or false output. If file exists then:
true will
run script A
false will
run script B
I have been searching the web for two days looking for something to help me get started on this and have not had much success.
Please help me. I really would appropriate any help or guidance.
Thanks....
RonRon
AppleScript calls this kind of script a "Conditional" = if this > then that
Some templates are in MacintoshHD/Library/Scripts/Script Editor Scripts/Conditionals
You don't need a value for "false" in binary as it is merely "not true" (else)
if true then
-- insert if actions here
else
-- insert else actions here
end if
If you already have your Scripts A & B working, copy>pastethem into the "insert actions here" part as appropriate
ÇÇÇ -
I need an execution of commands after the reply from the instrument matches with the string I provided for that i used true or false string match VI on which the true string the matching command and the string is the reply from the instrument. And I put the further executionable commands in frame after frame of sequence loop in the true of the case structure. Amd finally I given all the output strings to the concatenate string to get all the replies as one loop. But when I execute the program the desired result is not available. So kindly please help me to overcome this problem.
Attachments:
basic serial with changes.vi 24 KBYou VI makes absolutely no sense and I would recommend you start with a few simple LabVIEW tutorials before trying to tackle this.
What is the point of the FOR loop with 1 iteration, it might as well not even be there, same difference.
Why is there an abort primitive in the FOR loop, this mean the program will unconditionally stop abort before any downstream code will ever go into action. The program will never get past the FOR loop.
You created a circular data dependency and LabVIEW inserted a feedback node automatically, making things even worse. (see also)
You need to learn about dataflow, execution order, and data dependency.
You need to learn about the various types of tunnels (plain, autoindexing, etc.)
There is a tremendous amount of duplicate code. Large code sections are the same, differeing only by a string. You should only have one copy of that code inside a proper state machine. Have a look at the design templates and examples that ship with LabVIEW.
LabVIEW Champion . Do more with less code and in less time . -
Parameter Query for True or False values
I have what seems like a painfully simple task and it has me stopped dead. I reviewed a similar thread, and the answers there don't seem to apply. Working in Crystal 11.5 with an MS SQL database.
I am pulling data from vwCommmittees. There is a field in this view called IsActive. I want to create a committee list report that will allow the user to select only the active committees or all committees.
A SQL select statement that says where dbo.IsActive = '1' will return only the active committees.
In Crystal reports, if I place the IsActive field on the report, it returns with "True" or "False."
When I create a parameter for this field, I find that 1) I can't see the parameter in the report expert -- my only choices are Is any value, Is true, Is false or Formula.
I've made several attempts to create a formula and nothing is working. It's not clear to me wheter I should be creating a static or a dynamic parameter. When I choose boolean as the type, that doesn't seem to help. I tried a dynamic parameter which gave me true and false values, but don't seem to work.
Any pointers on dealing with this kind of parameter query would be greatly appreciated.
Sincerely,
Ridge (in New Joisey)Hi..
Create a static parameter and give the default values like
0 and 1
In Record Selection check like..dbo.IsActive = {?parameter}
If the above is not working for you, then create a formula
like..
If dbo.IsActive = '1' then
"Active"
Else "In Active"
Place this formula on your report and create a static parameter with default values Active and In Active.
In record selection filter the above.
Thanks,
Sastry -
[Help plz]Can't set a boolean attribute to true or false
Hello,
I'm new in NWDS development. I need to develop a download functionality
I used a FileDownload UIElement for that and I created a node context (ExcelExport) with 3 attributes :
- ExcelFile
- ExcelIcon
- And ExcelEnabled (Boolean type)
My problem is that everytime I try to set the attribute ExcelEnabled to true or false, it return me a java.lang.NullPointerException
I'm binding this attribute with "Enabled" property of the UIElement.
Have anyone got this error before? Thanks a lot for your help.
Kind regards,
Safae.Hello Safae,
Have you tried to put true/false value for the enabled property? I mean without using a context attribute?
Also try to create the attribute out of the node.
Regards,
ImaneA. -
How to set render true or false in java class
Use case:
i have a page in which i have one inputListOfValues attributes and two LOV .initial the LOV render attribute value is false .it means it show only one attribute in run time .inputListOfValues is content two value .suppose if first value A then the first LOV have to show and is it value is B then Second LOV have to show .i bind my LOV to class .but i do not know how to set render attribute at java class.<af:inputListOfValues label="Branch Name"
popupTitle="Search and Result Dialog"
id="ilov1"
model="#{pageFlowScope.organizationLOV.param['bindings.Organization'].listOfValuesModel}"
converter="#{pageFlowScope.organizationLOV.param['bindings.Organization'].convert['latinDesc']}"
valueChangeListener="#{viewScope.salaryBenefitsReportForm.branchChange}"
binding="#{viewScope.salaryBenefitsReportForm.branchName}"
rendered="true" visible="false"/>
<af:inputListOfValues label="Department Name"
popupTitle="Search and Result Dialog"
id="ilov2"
model="#{pageFlowScope.objectLOV.param['bindings.Department'].listOfValuesModel}"
converter="#{pageFlowScope.objectLOV.param['bindings.Department'].convert['latinDesc']}"
valueChangeListener="#{viewScope.salaryBenefitsReportForm.departmentChange}"
binding="#{viewScope.salaryBenefitsReportForm.departmentName}"
rendered="true" visible="false"/>
this is code in jsff .
and class code are following
public void reportBy(ValueChangeEvent valueChangeEvent) {
String value=(String)valueChangeEvent.getNewValue();
System.out.println(value);
if(value.equals("Branch")){
branchName.setVisible(true);
departmentName.setVisible(false);
AdfFacesContext.getCurrentInstance().addPartialTarget(branchName);
AdfFacesContext.getCurrentInstance().addPartialTarget(departmentName);
if(value.equals("Department")){
departmentName.setVisible(true);
branchName.setVisible(false);
AdfFacesContext.getCurrentInstance().addPartialTarget(departmentName);
AdfFacesContext.getCurrentInstance().addPartialTarget(branchName);
} -
What modifications are required to make a servlet support SSL data encrypti
Hi,
What modifications are required to make a servlet support SSL data encryption?
--kumarHi,
What modifications are required to make a servlet
support SSL data encryption?
--kumar No modifications are required in servlet. You have to setup servlet container. -
Hi all,
Pls tell me whether this sentence is true or false.
A transaction used by a BMT bean MUST have been started by the bean.
In book this question is marked as false, but as far as I think it should be true.
Pls update.
Regards,
SanjeevAs it's written I would say it's true as well.
Bean-managed transactions are only allowed for session beans(stateful and stateless) and message-driven beans. Furthermore, if there is any client transaction context propagated on the call to the BMT bean, the container is required to suspend the client tx before calling the business method. So, BMT beans cannot inherit client transactions.
For BMT stateless session beans and message-driven beans, there cannot be an active user transaction when the business method completes. If there is, the container is required to treat it as an error.
The slightly more interesting case is for stateful session beans. For BMT SFSBs, it's o.k. for the transaction to still be active when the business method returns. In that case, the container suspends the tx and assoicates it with the SFSB. Whenever the SFSB is invoked again, the previously associated transaction is resumed before the business method is called. ( The same rule holds for client transactions. If there is one, it will be suspended and resumed when the business method completes. ) However, even if the container resumes a previously suspended transaction before invoking the SFSB, it can only be a transaction that was started by that bean.
--ken -
Can we save a True or False state in Labview?
I'm using Labview 4.01 and I'm trying to control my testing process. In
this case, I have 3 gas cylinders and every one of them can be turned on
or off through the digital out lines. After one tank is empty, I can
turn it off and turn on another one. My question is, how we can save
this status either it's true or false so next time, we can open the
other one instead of this empty one. After this one is turned off, I can
show its state with an indicator, but the program can not read an
indicator, so we still can not check the state of this tank. Any one
have a solution for this problem?
Thanks in advance,
Guangde WangGuangde Wang wrote:
>
> I'm using Labview 4.01 and I'm trying to control my testing process. In
> this case, I have 3 gas cylinders and every one of them can be turned on
> or off through the digital out lines. After one tank is empty, I can
> turn it off and turn on another one. My question is, how we can save
> this status either it's true or false so next time, we can open the
> other one instead of this empty one. After this one is turned off, I can
> show its state with an indicator, but the program can not read an
> indicator, so we still can not check the state of this tank. Any one
> have a solution for this problem?
>
> Thanks in advance,
>
> Guangde Wang
Your version is too old. So I believe that saving data in any kind of
configuration file will
do the job (like .ini or .conf).
It also depends on if you are closing application between your vi runs.
If you don't remove the vi from memory, you have a chance to use global
or functional global to store your state.
In latest versions you can do it another way.
Sergey Krasnishov
Automated Control Systems
National Instruments Alliance Member
Moscow, Russia
[email protected]
http://acs.levsha.ru -
Hi,
I just want to know,
What version of SQL Server support ssl connection with TLS. 1.2 (SHA-256 HASH).
if support already,
how can i setting.
plz. help me!!!The following blog states that SQL Server "leverages the SChannel layer (the SSL/TLS layer provided
by Windows) for facilitating encryption. Furthermore, SQL Server will completely rely upon SChannel to determine the best encryption cipher suite to use." meaning that the version of SQL Server you are running has no bearing on which
encryption method is used to encrypt connections between SQL Server and clients.
http://blogs.msdn.com/b/sql_protocols/archive/2007/06/30/ssl-cipher-suites-used-with-sql-server.aspx
So the question then becomes which versions of Windows Server support TLS 1.2. The following article indicates that Windows Server 2008 R2 and beyond support TLS 1.2.
http://blogs.msdn.com/b/kaushal/archive/2011/10/02/support-for-ssl-tls-protocols-on-windows.aspx
So if you are running SQL Server on Windows Server 2008 R2 or later you should be able to enable TLS 1.2 and install a TLS 1.2 certificate. By following the instructions in the following article you should then be able to enable TLS 1.2 encryption
for connections between SQL Server and your clients:
http://support.microsoft.com/kb/316898
I hope that helps. -
Item Event - BeforeAction - true or false?
Hi,
Is there a basic rule for BeforeAction?
I know you can play with BeforeAction for personal use; but it is there a basic rule like:
et_CLICK: then it is BeforeAction == false
I like to know for following event:
et_CLICK
et_COMBO_SELECT
et_MATRIX_LINK_PRESSED
et_MATRIX_LOAD
et_CHOOSE_FROM_LIST
et_MENU_CLICK
Is there a Pattern for BeforeAction for ALL Item Events?
Thank you,
RuneHi Rune,
there's no real rule, because the events are different.
but usual it is before/after displaying or before/after mouseup
EventType | beforeaction = true | beforeaction = false
et_CLICK | before you release the mouse button/Button is pressed | after you release the mousebutton
et_ITEM_PRESSED | before you release the mouse button | after you release the mousebutton
et_COMBO_SELECT | Selection has not changed | Selection has changed
et_MATRIX_LINK_PRESSED | before you release the mouse button/Button is pressed | after you release
et_MATRIX_LOAD | matrix is empty | matrix is loaded
et_MENU_CLICK | Button is pressed/before release on menu item (without submenus) | after release
et_CHOOSE_FROM_LIST | before the Choose From List form is displayed | displayed
any other questions ?
greetings to montreal
David
Maybe you are looking for
-
How to change the size of the characters displayed on GUI screen?
Hi All, My problem is : the characters displayed on GUI screen are smaller than other associates when we are in same condition. Can anyone tell me what i should do to change the size? Thank you very much. Regards, Fiona
-
Corruption in cshelp.txt file on save
When I add a topic ID to the cshelp.txt file using the Context Sensitive Text-Only Topics editor and click Save, I get an error message about an invalid file. When I open the file in notepad it looks like this: . t o p i c H I D C _ B U T T O N _ C H
-
Multiple uploads - Setting up the fields.
I would like to make a page where the members can upload up to 4 images for their clients design proofs. Searching through examples and posts, I came up with this code to upload and insert the information into the database: <cfif IsDefined ('Submit')
-
hi, How do I use the CASE statement when the variable is a range (so_mes). so_mes is defined like a select-options. i have the next code. case so_mes-low. when '01'. move dobli-wtp01 to oejer. when '02'.
-
Bug or feature: TableView.EditEvent - same type for value and row?
Just noticed (normally I don't care overly much about generics, they are my natural enemies : -) that the return type for both cell and row data is the same: class EditEvent<T> { T getNewValue() T getOldValue() T getRowValue() }old/new va