Javaprog calls Delphiprog - Internal Error (0xeedfade)

Hi,
does anybody know what the errorcode mean, i habe a very simple javaprog, which calls a delphiprog, which i got from the third part. i habe to run the delphiprog throu my javaprog, but it failed at this runtimeerror.
~~~~~~~~~~protocol like the following:~~~~~~~~~~~
# An unexpected error has been detected by HotSpot Virtual Machine:
# Internal Error (0xeedfade), pid=2968, tid=2648
# Java VM: Java HotSpot(TM) Client VM (1.5.0_06-b05 mixed mode)
# Problematic frame:
# C [kernel32.dll+0x1eb33]
--------------- T H R E A D ---------------
Current thread (0x00037d18): JavaThread "main" [_thread_in_native, id=2648]
siginfo: ExceptionCode=0xeedfade, ExceptionInformation=0x0ace62d3 0x0ad01c28 0x0ad01ab0 0x00000000 0x0007fa14 0x0007fa54 0x0007f578
Registers:
EAX=0x0007f4f4, EBX=0x0ad01ab0, ECX=0x00000000, EDX=0x0ace62d3
ESP=0x0007f4f0, EBP=0x0007f544, ESI=0x0007f578, EDI=0x0007fa14
EIP=0x7c81eb33, EFLAGS=0x00000202
Top of Stack: (sp=0x0007f4f0)
0x0007f4f0: 00000000 0eedfade 00000001 00000000
0x0007f500: 7c81eb33 00000007 0ace62d3 0ad01c28
0x0007f510: 0ad01ab0 00000000 0007fa14 0007fa54
0x0007f520: 0007f578 00000000 0ad01c28 0ad01c28
0x0007f530: 0007f568 0ace610a 0007fa14 0ac93965
0x0007f540: 0007f568 0007fa54 0ace62d3 0eedfade
0x0007f550: 00000001 00000007 0007f55c 0ace62d3
0x0007f560: 0ad01c28 0ad01ab0 00000000 0007fa14
Instructions: (pc=0x7c81eb33)
0x7c81eb23: 8d 7d c4 f3 a5 5f 8d 45 b0 50 ff 15 04 15 80 7c
0x7c81eb33: 5e c9 c2 10 00 85 ff 0f 8e e6 d0 fe ff 8b 55 fc
Stack: [0x00040000,0x00080000), sp=0x0007f4f0, free space=253k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [kernel32.dll+0x1eb33]
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 2
CPU:total 2 family 15, cmov, cx8, fxsr, mmx, sse, sse2, ht
Memory: 4k page, physical 515516k(252684k free), swap 1258800k(548032k free)
vm_info: Java HotSpot(TM) Client VM (1.5.0_06-b05) for windows-x86, built on Nov 10 2005 11:12:14 by "java_re" with MS VC++ 6.0
~~~~~~~Protocol end .~~~~~~~~
thanks in advance.

Similar Messages

Flash Builder 4.5 Data Services Wizard, setting up REST service call returns Internal Error Occurred

Dear all -
I am writing with the confidence that someone will be able to assist me.
I am using the Flash Builder Data Services Wizard to access a Server that utilizes REST type calls and returns JSON objects. The server is a JETTY server and it apparantly already works and is returning JSON objects (see below for example). It is both HTTP and HTTPS enabled, and right now it has a cross-domain policy file that is wide open (insecure but its not a production server, it's internal).
The crossdomain file looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
   <allow-http-request-headers-from domain="*" headers="*" secure="false"   />
   <allow-access-from domain="*" to-ports="*" secure="false"/>
   <site-control permitted-cross-domain-policies="master-only" />
</cross-domain-policy>
The crossdomain file is in the jetty server's root directory and is browseable via HTTP and HTTPS (i.e. browsing to it returns the xml)
Now before all of you say that using wizards sucks (generally) I thought I would utilize the FB Data Services Wizard as at least it would provide a template for which I could build additional code against, or replace and improve the code it produces.
With that in mind, I browse to the URL of the Jetty Server with any web browser (for example, Google Chrome, Firefox or IE) with a URL like this (the URL is a little confidential at the moment, but the structure is the same)
https://localhost:somePort/someKey/someUser/somePassword/someTask
*somePort is the SSL port like 8443
*someKey is a key to access the URL's set of services
returns a JSON object as a string in the web browser and it appears like the following:
{"result":success,"value":"whatEverTheValueShould"}
Looks like the JSON string/object is valid.
I went through the Flash Builder Data Services Wizard to set up HTTP access to this server. The information that I filled in is described below:
Do you want to use a Base URL as a prefix for all operation URLs?
YES
Base URL:
https://localhost:8443/someKey/
Name                    : someTask
Method                    : POST
Content-Type: application/x-www-form-urlencoded
URL                              : {someUser}/{somePassword}/someTask
Service Name: SampleRestapi
Services Package: services.SampleRestapi
datatype objects: valueObjects:
Completing the wizard, I run the Test Operation command. Remember, no authentication is needed to get a JSON string.
It returns:
InvocationTargetException: Unable to connect to the URL specified
I am thinking - okay, but the URL IS browseable (as I originally was able to browse to it, as noted above).
I continue to test the service by creating a Flex application that accepts a username and password in a form. when the form is submitted, the call to the service is invoked and an event handler returns the result. The code is below (with some minor changes to mask the actual source).
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                                 xmlns:s="library://ns.adobe.com/flex/spark"
                                 xmlns:mx="library://ns.adobe.com/flex/mx"
                                 xmlns:SampleRestapi="services.SampleRestapi.*"
                                 minWidth="955" minHeight="600">
          <fx:Script>
                    <![CDATA[
                              import mx.controls.Alert;
                              import mx.rpc.events.ResultEvent;
                              protected function button_clickHandler(event:MouseEvent):void
                                        isUserValidResult.token = SampleRestAPI.isUserValid(userNameTextInput.text,passwordTextInput.text);
                              protected function SampleRestAPI_resultHandler(event:ResultEvent):void
                                        // TODO Auto-generated method stub
                                        // print out the results
                                        txtAreaResults.text = event.result.message as String;
                                        // txtAreaResults.appendText( "headers \n" + event.headers.toString() );
                    ]]>
          </fx:Script>
          <fx:Declarations>
                    <SampleRestapi:SampleRestAPI id="SampleRestAPI"
                                                                                             fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)"
                                                                                             result="SampleRestAPI_resultHandler(event)"
                                                                                             showBusyCursor="true"/>
                    <s:CallResponder id="isUserValidResult"/>
                    
          </fx:Declarations>
          <s:Form defaultButton="{button}">
                    <s:FormItem label="UserName">
                              <s:TextInput id="userNameTextInput" text="q"/>
                    </s:FormItem>
                    <s:FormItem label="Password">
                              <s:TextInput id="passwordTextInput" text="q"/>
                    </s:FormItem>
                    <s:Button id="button" label="IsUserValid" click="button_clickHandler(event)"/>
                    <s:FormItem label="results:">
                              <s:TextArea id="txtAreaResults"/>
                    </s:FormItem>
          </s:Form>
</s:Application>
It's a simple application to be sure. When I run it , I get the following returned in the text area field txtAreaResults:
An Internal Error Occured.
Which is equivalent to the following JSON string being returned:
{"success":false,"value":"An Internal Error Occured"}
It appears that the call is being made, and that a JSON object is being returned... however it does not return the expected results?
Again the URL constructed is the same:
https://www.somedomain.com:somePort/someKey/someUser/somePassword/someTask
So I am wondering what the issue could be:
1) is it the fact that I am browsing the test application from an insecure (http://) web page containing the Flex application and it is accessing a service through https:// ?
2) is the JSON string structurally correct? (it appears so).
3) There is a certificate enabled for HTTPs. it does not match the test site I am using ( the cert is for www.somedomain.com but I am using localhost for testing). Would that be an issue? Google Chrome and IE just asks me to proceed anyway, which I say "yes".
Any help or assistance on this would be appreciated.
thanks
Edward

Hello everyone -
Since I last posted an interesting update happened. I tested my Flex application again, it is calling a Jetty Server that returns a JSON object, in different BROWSERS. I disabled HTTPS for now, and the crossdomain.xml policy file is wide open for testing (ie. allowing every request to return data). So the app accessing the data using HTTP only. Browsers - IE, Opera, Firefox and Chrome. Each browser contained the SAME application, revision of the Flash Player (10.3.183.10 debugger for firefox, chrome, opera, safari PC; 11.0.1.129 consumer version in IE9,) take a look at the screen shot (safari not shown although the result was the same as IE and chrome)
Note that Opera and Firefox returned successful values (i.e. successful JSON objects) using the same code generated from the Data Services Wizard. Chrome, IE and, Safari failed with an Internal error. So I am left wondering - WHY? Is it something with the Flash Player? the Browsers? the Flex SDK? Any thoughts are appreciated. Again, the code is found in the original thread above.

Calls failing to connect due to "Internal Error"

I have been having issues, with increasing frequency, with Skype on my Mac as well as iPhone. Now EVERY time I try to call a phone number it gives the notification of "Call ended - internal error". What the **bleep**?

Hi, SOMEONE PLEASE HELP!
I'm a premium subscriber and I've had multiple calls fail today due to "internal error" and these are USA to USA calls. No proxy, nothing out of the ordinary, and they're failing...been going on for a couple days.
I'm using the most updated version, I've restarted multiple times.
PLEASE HELP!!!

Error while transporting objects:Internal error during pvc call: Parameter

Dear all,
We are facing the following error while transporting the individual configuration objects from our PI development system.
Export failed: Internal error during pvc call: Parameter versionSpecifier or version has the invalid value null .
However, it works fine when the complete configuration scenario is transported.
We tried to transport the objects with different user id's, even then the issue still exists.
Any inputs to resolve this will be highly helpful.
Thank you,
Younus

Hi Mohammed,
Answer is inside this oss [Note 1554387 - Error during export from Integration Directory|https://service.sap.com/sap/support/notes/1554387]. In this oss note, solution is to apply a patch (just a patch, not a SP). as it's a litle sap bug...
Note: your issue is also explained with picture in this one "1550549 - PI transport: Internal error during pvc call" (sorry for this one I cannot insert a link)
regards
Mickael
Edited by: Mickael Huchet on Jan 26, 2012 2:50 PM

Internal Error occurred while calling the ProcessDPCommands API

We have installed Business Objects XI with MySQL. We are getting following error when we click on view query on the WEBI Reports
" Internal Error occurred while calling the ProcessDPCommands API Error WIS 30270".
When we change the CMS database to ORACLE everything works fine it looks like some issues when CMS database is MYSQL
Please hep to fix this problem
Installation is on Solaris 10
Edited by: AshishDatar on Nov 6, 2009 3:00 PM
Installation is on Solaris 10

did you check whether universe connection is pointing to the correct db?The following url might be helpful:
[http://www.forumtopics.com/busobj/viewtopic.php?t=52355&view=previous]

An internal error occurred while calling 'submitReport' API. (Error: ERR_WI

An internal error occurred while calling 'submitReport' API. (Error: ERR_WIS_30270)
We get above mentioned error message at any point in WebI Rich Client.
DataSource: Teradata 12.0 (Local machine)
BO XI 3.1 Client installed on local machine
Universe (Secured connection)
WebI : desiging and creating in Standlone mode
WebI client version : 12.1.0.882
Many times above written error is thrown 2-3 times even when we click on OK button and lastly followed by new error message:-
Unable to get the first page of the current report - Web Intelligence will switch to structure view (WIJ 20003).
Flow: We create report based on locally saved universe. There are couple of scenarios for which error comes
1) After successfully saving the report, reopen and refresh causes this error (1st error and 2nd)
2) Droping a properly written variable on measure column, if done Ctrl + Z, report works sometimes (both or 2nd error message)
3) Draging out the mesaure or dimension from report (only 2nd error)
Report is simple and no other stuff except the cross tab table
Even if we start with simply dropping the dimension and measures on report, 2nd error comes at any time.
What we noticed is that if we do all desiging in structure mode and then run instead of in result mode, reports works for more time.

You can have a look here:
Input Controls with Break Error on webi report
http://www.forumtopics.com/busobj/viewtopic.php?t=60789&postdays=0&postorder=asc&start=45
Re: internal error occurred while calling the 'submitReport' API.
I'm Back
HAPPY NEW YEAR

DCA-40000: internal error when calling a web service

Hello,
I would like to call a web service in Oracle UCM with basic authentication (CheckInUniversal). In JDeveloper 11.1.1.2 I can specify username and password for the WS at design time and the JSPX runs fine.
Now I have added some piece of code into a managed bean (CheckInBean) to use a specific username and password at runtime. When I run the page I get a DCA-40000 with the following error stack:
<Utils><buildFacesMessage> ADF: Adding the following JSF error message: The Web Service call failed due to an internal error.
oracle.adf.model.adapter.AdapterException: DCA-40000: The Web Service call failed due to an internal error.
     at oracle.adfinternal.model.adapter.webservice.WSDataControl.invokeOperation(WSDataControl.java:270)
     at oracle.adf.model.bean.DCBeanDataControl.invokeMethod(DCBeanDataControl.java:430)
     at oracle.adf.model.binding.DCInvokeMethod.callMethod(DCInvokeMethod.java:257)
     at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1625)
     at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2141)
     at oracle.adf.model.bean.DCBeanDataControl.invokeOperation(DCBeanDataControl.java:467)
     at oracle.adf.model.adapter.AdapterDCService.invokeOperation(AdapterDCService.java:307)
     at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:730)
     at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:394)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:252)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:210)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
     at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
     at integration.view.CheckInBean.execute(CheckInBean.java:134)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
     at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
     at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1245)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
     at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:812)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:292)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
With debugger I found that it happens when the iterator CheckInUniversalResultIterator is called.
HTTP Analyzer shows that there are only empty SOAP messages sent to UCM but the correct values are present in the the bean.
Here is the code of the bean:
package integration.view;
import java.util.HashMap;
import java.io.*;
import java.util.Properties;
import javax.el.ELContext;
import javax.el.ExpressionFactory;
import javax.el.MethodExpression;
import javax.el.ValueExpression;
import javax.faces.application.Application;
import javax.faces.context.FacesContext;
import javax.faces.event.ActionEvent;
import oracle.adf.model.BindingContainer;
import oracle.adf.model.BindingContext;
import oracle.adf.model.binding.DCBindingContainer;
import oracle.adf.model.binding.DCDataControl;
import oracle.adfinternal.model.adapter.webservice.WSDataControl;
import oracle.adfinternal.model.adapter.webservice.security.SecurityModel;
// import oracle.binding.BindingContainer;
import oracle.webservices.model.Port;
public class CheckInBean extends SecurityModel {
private String fileName;
private String fileContent;
private HashMap primaryFile;
String mSavedCSFKey = null;
public CheckInBean() {
public void setFileName(String fileName) {
this.fileName = fileName; }
public String getFileName() {
return fileName;
public void setFileContent(String fileContent) {
this.fileContent = fileContent;
public String getFileContent() {
return fileContent;
public void setPrimaryFile(HashMap primaryFile) {
this.primaryFile = primaryFile;
public HashMap getPrimaryFile() throws IOException {
FacesContext facesCtx = FacesContext.getCurrentInstance();
Application app = facesCtx.getApplication();
ExpressionFactory elFactory = app.getExpressionFactory();
ELContext elContext = facesCtx.getELContext();
// gets the value from the managed bean
fileName = elFactory.createValueExpression(elContext, "#{pageFlowScope.ReportBean.reportName}", Object.class).getValue(elContext).toString();
System.out.println(fileName);
// puts the file name and the content into a hash map
HashMap hashMap = new HashMap();
hashMap.put("fileName",fileName);
System.out.println(fileName);
hashMap.put("fileContent",getFileInBytes(ReportBean.reportPath, fileName));
return hashMap;
private static byte[] getFileInBytes(String reportOutputPath, String fileName) throws IOException {
File file = new File(reportOutputPath,fileName);
System.out.println(reportOutputPath + "+" + fileName);
InputStream inputStream = new FileInputStream(file);
// Get the size of the file
long size = file.length();
System.out.println("Size of the file: "+ size);
// Check that size is not larger than Integer.MAX_VALUE
if (size > Integer.MAX_VALUE) {
System.out.println("File too large !!");
return null;
// Read the bytes into the byte array
byte[] byteArray = new byte[(int)size];
System.out.println("New Byte Array");
int offset = 0;
int byteRead = 0;
while ((offset < byteArray.length)
((byteRead=inputStream.read(byteArray, offset, byteArray.length-offset)) >= 0)){
byteRead = offset + byteRead;
System.out.println(byteRead);
inputStream.close();
return byteArray;
public void execute(ActionEvent aev) {
FacesContext fctx = FacesContext.getCurrentInstance();
Application app = fctx.getApplication();
ExpressionFactory expF = app.getExpressionFactory();
ValueExpression ve = expF.createValueExpression(fctx.getELContext(), "#{bindings}", DCBindingContainer.class);
DCBindingContainer cont = (DCBindingContainer)ve.getValue(fctx.getELContext());
DCDataControl dc = cont.findDataControl("CheckInECM");
if(dc.getAdaptedDC() instanceof WSDataControl)
WSDataControl wsdc = (WSDataControl)dc.getAdaptedDC();
wsdc.getProvider().setSecurityModel(this);
// execute the data control method, that was bound to this
// button's action listener.
MethodExpression me = expF.createMethodExpression(fctx.getELContext(),
"${bindings.CheckInUniversal.execute}", Object.class,
new Class[0]);
me.invoke(fctx.getELContext(), null);
// public BindingContainer getBindings() {
// return (BindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
// override security properties for any policy on the current port
// before the method execution.
public void initSecurity(Port thisPort) {
super.initSecurity(thisPort);
System.out.println(thisPort.hashCode());
Properties callP = (Properties)this.getCallProperties(thisPort);
callP.put("javax.xml.ws.security.auth.username", "sysadmin");
callP.put("javax.xml.ws.security.auth.password", "welcome1");
mSavedCSFKey = (String)callP.remove("csf-key");
this.saveCallProperties(thisPort, callP);
// Restore the config at the end of the request.
public void clearSecurityParameters(Port thisPort) {
super.clearSecurityParameters(thisPort);
Properties callP = (Properties)this.getCallProperties(thisPort);
callP.remove("javax.xml.ws.security.auth.username");
callP.remove("javax.xml.ws.security.auth.password");
//put back the saved csf key as default...
callP.put("csf-key", mSavedCSFKey);
this.saveCallProperties(thisPort, callP);
}

If you could enclose your code inside tag it will improve readability for us.
Anyways, first thing that I could think of is - what is the scope of your managed bean..? If its in request scope can you try changing it to higher scope level (session scope or page view scope).
regards,
~K

An internal error occured while calling 'processDPCommandsEx' API. (Error: ERR_WIS_30270)

Hi ALL,
I am facing a wierd issue while opening/refreshing/broadcasting a webi report.
The error message scrnshot:
This error is not throughout the reports, but for specific reports only, when checked the Bex query definition it works fine, but gives error for Webi reports.
Recently we had upgrade of BO 4.0 SP7 patch 9.
The reports are directly built on Bex queries, Bex queries contains simple Structures and few CKF's.
Would be thankful for any help recieved in resolving the above issue.
Regards,
Jaywant Kulkarni.

Hi jaywant,
Please check the note: 1760827 it may be helpful
( An internal error occurred while calling the 'processDPCommands' API. (ERR_WIS_30270) due to some scenarios.
Scenario 1:
Error occurs when try to refresh a migrated Web Intelligence report in InfoView, after entering a date or dates for prompts.
Suggested Solution:
Modify problematic report in Webi.
Change the prompt definition to be a constant, run the report in Webi, and save it.
Change the prompt definition back to prompt with required date definition. Make sure you are using the correct date format! (The report prompt should tell you what the format is supposed to be.) Re-run the report in Webi, and save it.
Re-open the report in InfoView and refresh.
Scenario 2: Error occurs when trying to edit the properties of a Webi report containing merged dimensions.
Suggested Solution:
Remove the merged dimensions and then re-establish them.
Scenario 3: Error occurs when the InfoView report has been open and idle for a long time.
Suggested Solution:
This error can be an indication of a time-out, based on the server’s settings. Make sure you save your work often. You will need to close and re-open the report when you get this error, and you may have lost any unsaved changes.

Internal error - NUMBER_GET_NEXT call error while craeating new company address

Dear Team,
In solution manager while we going to create company address through tcode SUCOMP and during saving the record error message occur as "Internal error -NUMBER_GET_NEXT call error".
Please suggest for solution
Regards,
Ajay

Dear Mr. Rafikul,
There is no ABAP dump but in SM21 there are error message:-
"Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a
termination message from the application (MESSAGE Axxx) or by an
error detected by the SAP System due to which it makes no sense to
proceed with the transaction. The actual reason for the termination
is indicated by the T100 message and the parameters.
Additional documentation for message E0 022
EDI: Error process code '&' is not available
&CAUSE&
A syntax error was identified while processing an inbound
<DS:GlOS.IDoc>IDoc. There is no entry with the key &v1& in 'Error
process codes'. However, this process code was determined from the
table of status values (TEDS1).
&WHAT_TO_DO&
Please check the 'Error process codes'.
IF &DEVICE&='SCREEN'
<DS:TRAN.WE40>Execute function
ENDIF
One document format shows more"
Now my one of problem solved. When i have go to SU01 and checked in address tab, its work now. Earlier its was not work.May be executed the report Z_OSSNOTE_445575 in system, its should be working. Thanks for your answer.
But till m facing in SUCOMP for creating company address.
Regards,
Ajay Asawa

Internal error during pvc call: No space left on device (errno:28)

Hi
When we am exproting the objects ( using File System) we are getting the following error
Internal error during pvc call: No space left on device (errno:28) For more information, see the server log.
Please help us how to resolve this problem
Thanks & Regards
Sowmya

Hi
Check with the export directory file system. Looks like space issue for the .tpz you are trying to export.
Thanks
Gaurav

I am receiving this error message when trying to export pictures: 'Unable to Export": An internal error has occured: Win32 API error 2 ( "The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.// I have a H

I am receiving this error message when trying to export pictures: 'Unable to Export": An internal error has occured: Win32 API error 2 ( "The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.// I have a HP ENVY Phoenix, fully loaded, 1 1/2 years old.

Nevermind I fixed it. Thank you.

JNI - core dump - internal error on linux after calling Java method

I'm getting a core dump after calling athe main statric method using JNNI.
On linux.
I can get the class id correcttly but when I attempt to call the method it craches with an internal error , anyone know why it would crash instead of just not work.
if(cls)
    main_methodID = env->GetStaticMethodID(cls, "main", "([Ljava/lang/String;)V");
     printf("Class Found Successfully\n");
else
    printf ( "cls not found\n");
    return 0;
if(main_methodID)
          jstring first_str = env->NewStringUTF("The First String");//create string
          jobjectArray args = (jobjectArray)env->NewObjectArray(1,env->FindClass("java/lang/String"), first_str);//new array with 2 elements
               env->SetObjectArrayElement(args, 2, first_str);//insert the second string into index 1 of the array
          jstring second_str = env->NewStringUTF("The Second String");//create string
          env->SetObjectArrayElement(args, 1, second_str);//insert the second string into index 1 of the array
     env->CallStaticVoidMethod(cls, main_methodID, args);//pass the array to the Java main method
                              The JAVA method is
public static void main(String[] args) {
    System.out.println("Main method in Framework");
        Framework framework = new Framework();


I see yere points but what I see on linux is it makes it to the constructor of the Java object and somewhere afterwards it bails out, the Java app does work alone. It appears to have problems initializing the JFrame, could there be a problem with the Java inheritance when a JVM is invoked throurgh native invocation??
Here's some of the Java stuff
public class Framework extends WindowAdapter {
    public int numWindows = 0;
    private Point lastLocation = null;
    private int maxX = 500;
    private int maxY = 500;
    public Framework() {
        System.out.println("JAVA Framework cnst");//GETTING HERE
        makeNewWindow();
    public void makeNewWindow() {
        System.out.println("JAVA makeWindow"); //GETTING HERE
        JFrame frame = new MyFrame(this); //NOT GETTING HERE!!!!!!!!!
        numWindows++;
        System.out.println("Number of windows: " + numWindows);
        System.out.println("Frame location: " + lastLocation);
        frame.setVisible(true);
        System.out.println("Post Java set frame visible");
    public static void main(String[] args) {
    System.out.println("Main method in Framework");
        Framework framework = new Framework();//GETTING HERE
class MyFrame extends JFrame {
    protected Dimension defaultSize = new Dimension(200, 200);
    protected Framework framework = null;
    public MyFrame(Framework controller) {
        super("New Frame");
        System.out.println("MyFrame cnst ");//NOT GETTING HERE!!!!!!
        framework = controller;
        setDefaultCloseOperation(DISPOSE_ON_CLOSE);
        addWindowListener(framework);
        JMenu menu = new JMenu("Window");
        menu.setMnemonic(KeyEvent.VK_W);
       setSize(defaultSize);
}

Internal Error when calling BES

Hi,
I published a web service:
https://ussouthcentral.services.azureml.net/workspaces/a5a6b2af17e749a29ae820df3ea5bdf2/services/93564333e9f547f2aaf48f7a9349df08/jobs
And I tried to call BES in python based on the sample code, but I got the following error:
{u'Details': u'Process exited with error code -2\nRecord Starts at UTC 03/16/2015 21:01:06:\n\n[ModuleOutput] Error: Error 0000: Internal error\n\nRecord Ends at UTC 03/16/2015 21:01:13.\n\n', u'Results': None, u'StatusCode': u'Failed'}
I had also verified the RRS works fine.
Any suggestion?

Hey Cyan,
We don't have access to your Azure Storage account - if you go the logging route, the logging outputs will be present in your storage account as described by the document.
Personally, I like to debug BES by replacing the top-level dataset/web service input with a Reader module pointint to the file you're passing into BES (if you don't have a web service input, you can ignore this). Make sure all the web service parameters
are the same, and then run the experiment in Studio. It should fail the same way.
Regards,
AK

An internal error occured while calling 'getBlob' API. (error: ERR_WIS_3027

Hi Team,
Please help me in resolving the below error message.
One of my user is experiencing this when trying to run a report.
"An internal error occured while calling u2018getBlobu2019 API. (error: ERR_WIS_30270)". I have checked the previous discussion on the same, But I could not get it. Could some one help me as what I can do to resolve this.
Thanks in Advance
Mmvihar

Hi George Pertea,
Appreciate your prompt response.
I found a simple solution for this.
This error message occurs when the TOMCAT server memory exceeds more than 1.3 gb. Hence, restart the TOMCAT server would resolve this issue.
Here are the steps in detail.
1. Log into each server through either citrix, remote desktop or mstsc from run command.
2. Click on task Manager.
3. Click on process, if you find TOMCAT memory is more than 1.3 gb, come back to CCM and stop tomcat server.
4. Wait for 20 seconds and then start tomcat server. Check all the remaining servers and do the same
This resolved the issue.
Thanks & Regards
Mmvihar

"An internal error occured while calling 'answerPrompts' API.(Error: wis_30

Hi Gurus
Getting an error message while running a webi report from infoview link(server:8080/InfoViewApp/logon.jsp)
as
"An internal error occured while calling 'answerPrompts' API.(Error: ERR_WIS_30270)
I found that while selecting refresh checkbox in one of the query which is using .xls file from the local system this is showing above error while running from above link.
If it is unchecked it is running without any error.
while running report from webirichclient(where we are developing reports) it is running without any error.
Thanks in Advance
Regards
Ritu Raj

It seems you are on SP3, and I assume the operating system of the BO server is Windows based.
Please cross-check that the Excel version you have matches the ODBC driver in the supported platforms document for XI3.1 SP3 [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4079f8f6-2b49-2d10-d790-bc596012dc25]
Second thing, I would like to see screenshots of what you mean by
"I found that while selecting refresh checkbox in one of the query which is using .xls file from the local system this is showing above error while running from above link.
If it is unchecked it is running without any error."
just to avoid misunderstandings from my side
Thanks!
Best regards,
Simone

Javaprog calls Delphiprog - Internal Error (0xeedfade)

Similar Messages

Maybe you are looking for