Javascript Error When Loading Dreamweaver CS3

Hi,
Thanks for taking time to read my post.
I have Dreamweaver CS3 installed. It was running fine till tomorrow and than suddenly I started to get javascript errors when trying to open file in DM. I reinstalled DM twice but issue was not resolved.
Below is the image of error I get:
Please advice.
Sincerely,
Zeeshan

It sounds as though you have a corrupted cache file. Instructions on how to delete it: http://forums.adobe.com/thread/494811.

Similar Messages

How do I fix a javascript error when opening Dreamweaver?

DW CS6 recently started having 2 JavaScript errors while opening the application and at least 1 additional JavaScript error when using the Insert Image command. Can someone provide some advice on fixing this issue?

This will help -
Index to Dreamweaver FAQ
Look at the very first issue.

Javascript error message loading dreamweaver mx

this may be two different questions but here goes:
-- i downloaded the interakt kollection a while back and just
got time to use it. by now i noticed that a newer version was
available so i downloaded it. but it crashed my machine trying to
update. and an error message now comes up about a javascript error
trying to load one of the interakt files. i put the system back 24
hours but the same error comes up. i click okay and dreamweaver mx
continues, but what does it mean?
-- i'm just starting php programming and perform the simplest
function, saving a .php site in apache2\htdocs and a file within
the site. but when i try to run the php from the livedata view, i
get a http 404 message about the doc not found. no wonder: the doc
is not the one i saved, but has a longer file name. tried this a
couple of times with different file names and the same thing
happens. suggestions please.
thanks,
michael

Michael
You may need to uninstall and then reinstall DW &
Interakt. The issue that
you are probably running into is that Interakt changed some
of the DW files
which worked until the DW 8.02 update came out, and rewrote
those files. The
Interakt updater probably relies on finding the updated DW
files.
When you preview a file DW creates a temporary version of it,
and runs that,
and then deletes it. You can not reference these temporary
versions in any
other way.
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"hconnorjr" <[email protected]> wrote in
message
news:ef9hkr$5ac$[email protected]..
> this may be two different questions but here goes:
>
> -- i downloaded the interakt kollection a while back and
just got time to
> use
> it. by now i noticed that a newer version was available
so i downloaded
> it. but
> it crashed my machine trying to update. and an error
message now comes up
> about
> a javascript error trying to load one of the interakt
files. i put the
> system
> back 24 hours but the same error comes up. i click okay
and dreamweaver mx
> continues, but what does it mean?
>
> -- i'm just starting php programming and perform the
simplest function,
> saving
> a .php site in apache2\htdocs and a file within the
site. but when i try
> to run
> the php from the livedata view, i get a http 404 message
about the doc not
> found. no wonder: the doc is not the one i saved, but
has a longer file
> name.
> tried this a couple of times with different file names
and the same thing
> happens. suggestions please.
>
> thanks,
>
> michael
>
>

Javascript errors when loading ADF app

We are running two ADF applications in a weblogic server with ADF 11.1.2.3 patches. Out of these two applications, users intermittently encounter javascript error using either IE 8, IE 9, or Firefox in http mode at first screen. We only recently started testing https, so we do not know if the error will occur with https – however, it needs to work in both modes. This error sometimes goes away by clearing the cache and sometimes goes away over time. The front page for the two applications are essentially the same. We investigated and diagnosed (through IE developer tool) is that the JS files containing the core ADF JavaScript libraries are not being downloaded completely (this is same for other static files including image files). Also could notice that these incomplete files took a much longer time to download (16ms) when compared to others(<1ms) of same size.
The issue may be related to : https://forums.oracle.com/thread/1558474. as the error messages shown here are almost the same especially those with ADF Javsacript API missing.

Can you try restarting the server once. We resolved this issue by restarting the server and clearing and restting the browesr to the defaults.

Javascript error when loading Portal Content

I used "NW04 SP16 sneakpreview".
Installation went fine but I can't seem to get anything in my portal content PCD. Below on the left I have Javascript errormsg which states the following:
Line: 90
Char: 3
Error: 'undefined' is null or not an object
Code: 0
Url: (very long url)
I thought it had something to do with the errormsg that I received about the encryption config failure (see below) so I executed sap note 796540:
If you installed the J2EE Engine with "weak encryption", the most probable cause for problems with user mapping is incorrect configuration. To resolve this, set the UME property "ume.usermapping.unsecure" to "TRUE", restart the J2EE server, and try again.
But this dit not the trick unfortunantly.
I also checked for permissions for my Admin but he has Super_Admin so that should be ok to I think.
Perhaps it has something to do with not having a System Landscape defined but how can I do this?
Or is it something else that I have overseen? Perhaps installing a license? (which I did not do yet)
Thank you for your assistance.
Kind regards,
Tom.
PS if you need more info I'll provide it for you.

Thanks for your update, we have resolved the issue with this help. Very thankfull.
regards,
kishore

Javascript error when opening CS3 on pc..?

I cannot open ID on my CS3 package using my pc. The error appears twice in a box on screen stating
'JavaScript Error'
'Error Number 45'
'Error string :Object is Invalid'
'Line 387'
also
'JavaScript Error'
'Error Number 45'
'Error String; Object is Invalid'
'Line 428'
there was a problem initially due to program plug-ins reported missing so i tried going onto 'Help' and clicking on 'Configure Plug-Ins' from the drop down menu.
Not sure what i did.. but now i cannot use ID as it shuts down after the javascript errors are reported.
Anyone help?

hi
thanks for all the helpful info
i tried to reinstall INDESIGN only... didnt work same problem.
i tried by uninstalling INDESIGN and then reinstalling it only.... didnt work same problem.
I guess im going to have to do a full reinstall.. not a problem, do i need to contact yourselves to get clearance for a reinstallation?
I had a hard drive crash about 6 months ago and had to reinstall, had to phone Adobe and get an online clearance as id exceeded my sole installation for my CS3 hard copies.
thanks again
Date: Sat, 2 Jan 2010 09:50:57 -0700
From: [email protected]
To: [email protected]
Subject: Javascript error when opening CS3 on pc..?
I'd bet the original scenario was something like you tried to open a file and saw a message that you were missing plugins, or they were out of date, and that you should update or upgrade. That's the typical message you get when you try to open a file saved from a newer version of ID. Unfortunately it's quite misleading -- nothing you do to the plugins will help you in that case, and trying to use newer versions would be disastrous.
You should be able to selectively reinstall just ID. If you have the DVD you can run the installer and do a "Repair" installation, and if that doesn't work, you should be able to uninstall ID, then reinstall without removing the whole suite. If that still doesn't work, bite the bullet, uninstall everything and run the clean script (http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402767&sliceId=1), then reinstall. I'm not sure what happens with a downloaded installer, but I suspect it works the same. I'm pretty sure I read somewhere that to uninstall from a download you need to have it in the same location as was originally used for the installation.
Peter
>

Multiple JavaScript errors when opening aspx file in Dreamweaver

I get multiple javascript errors when opening aspx file in Dreamweaver similar to... "While executing translateHyperLink in ExternalRenderers.htm, a JavaScript error occurred."

Hi Steven,
Not sure if this is related, but can you try the solutions in Troubleshoot JavaScript errors | Dreamweaver CS4, CS5, CS5.5, CS6
Thanks,
Preran

JavaScript Error while Loading

Hi Guys,
Anyone any helpo for this. When I start my version of
Dreamweaver 8.0 I get the following error message:
'javaScript error while loading LocalVariable.html:
At line 31 of file "C:\Program Files\Macromedia\Dreamweaver
8\Configuration\ServerBehaviors\ASP_Vbs\LocalVariable.html:"
Type error dw.getDocumentDOM() has no properties
I am using a trial version of DW8 on Vista Home Premium
Many thanks

Hi Guys,
To advise, foundf the problem, it was a server extension I
had added, removed it and solved the problem.
Thanks

Error -5000 and: Error when loading the transcode setting

For a couple of days I've been trying to export my project on a DVD, but on the half way of the transcoding it comes the Error -5000, and then there is such a message, something about the navigation, can't be found etc... I work on a mac OS X, using Encore CS3, all my data I've got on my external harddisk, with space of 80 GB.
Besides, when I'm trying to export my project on a blu-ray disc, there comes a message: Error when loading the transcode setting! I know that there are only two codecs there - H.264 and MPEG-2, and there are only MPEG-2 movie files there, so I set the MPEG-2 codec. And there comes such a thing! Having set the H.264, there comes the same. What can it be?
And the last one is the copy protection. I know that it can be activated, with CGMS and Macrovision, only if the CSS option is set on "permit no copies". So I do, and then there comes a message - "for these settings there is no copy protection provided". So what now to do?

My flash drive PNY comes up with error -5000 and i do not know what to do can you help me with this problems

Receiving error after loading Dreamweaver... In a time crunch ...project deadline... need to identify problem and fix as quickly as possible

Receiving error after loading Dreamweaver... In a time crunch ...project deadline... need to identify problem and fix as quickly as possible
Occurs after I load Dreamweaver; most of the time --- Sometimes not until I try to access CSS Designer
Have screen capture of error (see next page)
Windows 7 Home Premium - Service Pack 1
Platform 64 bit OS
Has worked fine until recently
Have installed one program (Print Artist Platinum 24 by Nova Development)
Tried restore point but not dated back far enough
Uninstalled and reinstalled Dreamweaver CC 2014 from Creative Cloud.. same error
Any Ideas?

Troubleshoot JavaScript errors | Dreamweaver CS4, CS5, CS5.5, CS6
Try step #4 and step #12

ORA-00054 error when loading Oracle table using Data Services

Hello,
we are facing ORA-00054 error when loading Oracle table using BO Data services
(Oracle 10g database, BODS Xi 3.2 SP3)
Test Job performs
1- truncate table
2- load table (tested in standard and bulk load modes)
Scenario when issue happens is:
1- Run loading Job
2- Job end in error for any Oracle data base error
3- When re-running the same Job, Job fails with following error
ORA-00054: resource busy and acquire with NOWAIT specified
It seems after first failure, Oracle session for loading the table stays active and locks the table.
To be able to rerun the Job, we are forced need to kill Oracle session manually to be able to run the Job again.
Expected behaviour would be : on error rollback modifications made on table and BODS stops Oracle session in a clean way.
Can somebody tell me / or point me to any BODS best practice about Oracle error handling to prevent such case?
Thanks in advance
Paul-Marie

the ora-0054 can occure depending how the job failed before. If this occures you will need the DBA to release the lock on the table in question
Or
AL_Engine.exe on The server it creates the Lock. Need to Kill Them. Or stop it..
This Problem Occurs when we select The Bulkloading Option in orclae We also faced the same issue,Our admin has Killed the session. Then everything alright.

Error when loading XSLT mapping of the application

Hi,
I am using XSLT mapping in XI.
It is working ok when I test it in Interface Mapping but it gives below error when I test end to end scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">TRANSFORMER_CONF_EX</SAP:Code>
<SAP:P1>com/cba/***.xsl</SAP:P1>
<SAP:P2>urn:**:**</SAP:P2>
<SAP:P3>450326d0-1559-11dd-99a1-d89c0a0a380b</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when loading XSLT mapping of the application</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Yes, I have activated it
Regards,
Anirudh.

hi
please assure that if you save your xslt stylesheet locally, that it is saved in UTF-8 format, before you import it.
Pls do export the imported archive as a zip file to your local disk and try opening the same. If its not then the zip file which you have uploaded might have got corrupted/is not fully uploaded.
Try activating the imported archive and do a check before you do that. This you can do with a minor change in the description or so.
reward points if found helpfull
regards
chandra.k

Error when loading data in Infopackage

Hi Friends,
I'm getting the following error when loading please help it is quite urgent.
Value 'ZSATX #1 ' (hex. '436F6E7461696E6572202331 ') of characteristic ZSIGNI contains invalid characte BRAIN
Thnaks ,

Hi Smily,
It refers to an invalid char found in this InfoObject value. Does your system have anything maintained in RSKC?
For good info you can refer to Eugene's blogs:
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
Hope this helps...

Error when loading lower case

Hi Friends,
I getting an error when loading the Infopackage ,
"Value 'sss ' (hex. '737373 ') of characteristic Zapple contains invalid characters"
I used the formula "To upper" in my T/R still I was getting the same error" and also I edited the value in PSA to "SSS" and loaded and still pointing to the same error. when I do a find for "sss" I dont see any value in PSA.
Please advice, it will be really appreciated,
thanks alot in advance

Hi,
U cont see the special characters in display mode in PSA...
for that First the check the reason for error,
it is from PSA, and the status in the monitor turned to red with errors or collection eneded with source system.. then go to manage of data target delete the red request... now go to PSA in modelling then select ur infosource right click select the option edit PSA data..
Now u can see the some special characteristics in the record that error occured... once it is complete then save come back to PSA screen then once again right click on the Infosource select immeadiate update.. it will work fine..
Siddhu

JAVAMAP-Sax Parser ...............Linkage error when loading the class.

Dear all,
Do we have any extra things to execute the Java mapping using the Sax Parser?
When I am executing the interface mapping ,I am getting the" Linkage error when loading the class" error.
Kindly let me know your personnel maildId so that I can mail you the screen shots.
Thanks,
Srinivasa

Dear sunil,
Find the File.
Source:
<MTO_FTP_MAT_DETAILS>
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
TARGET
MTI_FTP_MAT_DETAILS
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
Source:
<MTO_FTP_MAT_DETAILS>
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
TARGET
MTI_FTP_MAT_DETAILS
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.Map;
import javax.xml.parsers.SAXParser;
import javax.xml.parsers.SAXParserFactory;
import org.xml.sax.Attributes;
import org.xml.sax.SAXException;
import org.xml.sax.helpers.DefaultHandler;
import com.sap.aii.mapping.api.StreamTransformation;
class Echo {
public static OutputStream out;
public class myEcho extends DefaultHandler implements StreamTransformation {
private Map map;
public void setParameter(Map param) {
map = param;
public void execute(InputStream in, OutputStream out) {
DefaultHandler handler = this;
SAXParserFactory factory = SAXParserFactory.newInstance();
try {
SAXParser saxParser = factory.newSAXParser();
Echo.out = out;
saxParser.parse(in, handler);
} catch (Throwable t) {
t.printStackTrace();
public void startDocument() throws SAXException {
try {
Echo.out.write("<?xml version='1.0' encoding='UTF-8'?>".getBytes());
} catch (IOException e) {
e.notify();
public void endDocument() throws SAXException {
try {
Echo.out.flush();
} catch (IOException e) {
throw new SAXException("I/O error", e);
public void startElement(String namespaceURI, String sName, // simple name
String qName, // qualified name
Attributes attrs) throws SAXException {
String eName = sName; // element name
if ("".equals(eName))
eName = qName; // not namespace-aware
if ("ns0:MTO_SAP_MAT_DETAILS".equals(qName)) {
try {
Echo.out.write(("<MTI_FTP_MAT_DETAILS>").getBytes());
} catch (Exception e) {
e.printStackTrace();
} else {
try {
Echo.out.write(("<" + qName + ">").getBytes());
} catch (Exception e) {
e.printStackTrace();
public void endElement(String namespaceURI, String sName, // simple name
String qName // qualified name
) throws SAXException {
String eName = sName; // element name
if ("".equals(eName))
eName = qName; // not namespace-aware
if ("ns0:MTO_SAP_MAT_DETAILS".equals(qName)) {
try {
Echo.out.write(("</MTI_FTP_MAT_DETAILS>").getBytes());
} catch (Exception e) {
e.printStackTrace();
} else {
try {
Echo.out.write(("</" + qName + ">").getBytes());
} catch (Exception e) {
e.printStackTrace();
public void characters(char buf[], int offset, int len)
throws SAXException {
String s = new String(buf, offset, len);
try {
Echo.out.write(s.getBytes());
} catch (Exception e) {
e.printStackTrace();

Javascript Error When Loading Dreamweaver CS3

Similar Messages

Maybe you are looking for