Javascript errors in DW CC 2014 (win7)

when inserting table: Alert" in TableCommands initializeUI is not defined"
Save file: Alert "in file _afterSave: afterSafe is not defined"

Try the steps here: Troubleshoot JavaScript errors | Dreamweaver CS4, CS5, CS5.5, CS6

Similar Messages

Fix for Dreamweaver CC 2014.1 JavaScript Error With All ASPX Files

Entire morning wasted.
Adobe's upgrade to Dreamweaver 2014 to 2014.1 on Windows 7 Professional has broken the product across the board and it no longer opens any .aspx pages correctly. A large number of people use .NET and now we can no longer access/use these files/pages without multiple JavaScript errors. Particularly those that have edited the MMDocumentTypes file to make the product work in the first place since they stopped supporting the users that develop in ASP.NET.
Every time a .aspx file is now opened, the following JavaScript error is received: "While executing translateCustomControl in ExternalRenderers.html, a JavaScript error occurred. Click 'close' and it appears again...over and over. Our sites are all unable to open in DW because of this. It worked fine in earlier versions of DW, including 2014. It's only 2014.1 that broke everything.
The fix for this:
1. Follow instructions on this out-of-date help file: Change, add recognized file extensions | Dreamweaver
2. (and the part that's new): The MMDocumentTypes file is located in C:\Users\*your username*\AppData\Roaming\Adobe\Dreamweaver CC\Configuration\DocumentTypes directory. Open that file and add aspx back to the <documenttype id="HTML"> declaration at the top.
I am posting this issue here in hopes that some of the users won't waste most of the day trying to figure this out.
Chris Lee

Hi Ivan,
I'm having that exact same problem now...in addition to that JavaScript error message coming back. I submitted a bug report last week about this and received the following reply:
Hi Chris,
We would like to let you know that we able to reproduce this issue at our end. Thanks for reporting this.
We will try to prioritize it for fixing. This might take some time. We thank you for your patience with us in this regard.
Please let us know if you need help regarding anything else. We will be more than happy to help you.
Thanks,
Arindam Ghosh
Dreamweaver Team,
Adobe Systems
Hopefully they can get this fixed soon, as it's ground my work in the software to a halt.
Chris

Multiple JavaScript errors Dreamweaver CC 2014

I'm getting multiple JavaScript
errors Dreamweaver CC 2014 How to fix?@

https://helpx.adobe.com/dreamweaver/kb/troubleshoot-javascript-errors-dreamweaver-cs4.html
Start with #12 & #4 and go through the rest only if necessary.

Hyperlink to SSRS Report throws JavaScript Error

Hoping this is the right place to get help here. I'm not sure if this is an error in ASP.NET, SQL Server 2005 Reporting Services or some compatibility issue between VS 2010 and VS 2013 Express for Web.
I have an ASP.NET web form written in VS 2010 / VB.NET. The form has three hyperlink controls that have NavigateURL properties that are set at runtime. Those URLs point to reports on a SQL Server 2005 Reporting Server. The app runs in our Intranet and we use
Windows authentication throughout. I am using the ASP.NET Development Server (Version 4.0.30319.18408) locally.
This app used to work just fine, but recently it broke. Now when I run my code and click the hyperlink control (IE is the default browser) I get a JavaScript error of monumental complexity/density.
The URLs work in IE. They work in FireFox. If I set FireFox to be my default browser it's opens fine from VS. But when I run it in IE I get the error.
When I click the Hyperlink, I get a messagebox saying "Javascript runtime error. Access is Denied." [Break] [Continue] [ Ignore]
Behind that, in Visual Studio, there's a 'Script Block [dynamic] tab open. It has a lock symbol on it and the window is FILLED with hugely dense and incomprehensible Javascript. If I break, I'm dropped into the code. The offending line is:
this.FieldFocus=function(a){var b="undefined"!=typeof LP?LP.getBrowser().selectedTab.linkedBrowser:null;if("undefined"==typeof LP||b){var c=b?b.contentDocument:document;if(c&&!("undefined"!=typeof c.FieldFocusDone&&!0==c.FieldFocusDone))if("undefined"!=typeof
c.LPlpUseLastPassLogin&&!0==c.LPlpUseLastPassLogin)lploggedin?(c.LPlpUseLastPassLogin=!1,LP.FieldFocus(a)):(lp_showNotification("UseLastPassLogin",b,0,"login",null),c.LPlpUseLastPassLogin=!1,c.LPlpm_setupFocusHandler=!1,c.FieldFocusDone=!1);
else{if(lpNotificationsAfterClick)lpCheckGenPwAndFF(b,c,!1);else if("undefined"==typeof c.LPlpgenerateandfill&&"undefined"!=typeof c.LPlpfillforms)lp_showNotification("FillableFormDetected",b,0,"formfill");else
if("undefined"!=typeof c.LPlpgenerateandfill)lp_showNotification("GeneratePassword",b,c.LPlpgenerateAids,"generate",c.LPlpgenerateForm,null,c.LPlpgenerateandfill,c.LPlpfillcurrent);else return;c.FieldFocusDone=!0}}};
Needless to say, I have no frickin' clue what this is. I'm new to web programming, so this is totally beyond my abilities.
Possible Factors:
Compatibility view is on for all Intranet sites, but turning that off makes no difference.
I recently upgraded from WinXP to Win7 64-bit.
I also recently tried loading the Web Project into VS 2013 Express.
I'm not sure which of these may be a factor, just thought I'd mention them.
Fix Attempts:
I tried removing my fancy code and just setting the correct URL in code. Error.
I created another hyperlink control, and in code I copied NavigateURL from the existing control to this one. Clicking that one WORKS. WTH?
Any help would be deeply appreciated, thanks.
Barry

Well you can post a question in the ASP .Net forum and see if you can get an answer.
"The URLs work in IE. They work in FireFox. If I set FireFox to be my default browser it's opens fine from VS. But when I run it in IE I get the error. "
The above makes no sense to me. The URLs work in IE but when I run it in IE I get the error?
This makes no sense either "This app used to work just fine, but recently it broke" as apps don't just break. Something changes to cause an issue with them. Which systems did the app "break" on? What upgrades were recently done on those
systems?
When you opened the project in Visual Studio Express 2013 for web is that when the app broke? Maybe the app requires more than Visual Studio 2013 Express for web has available.
Was Visual Studio 2010 an Express edition for web? Or did it have more capability than that?
Did you load a newer version of IE on that system? As the WebBrowser control, from what I understand, uses the current rev of IE on the system as "The
WebBrowser control is a managed wrapper around a component installed with Internet Explorer. Use this property to determine which version of Internet
Explorer is installed. This is useful when your application uses a feature of Internet Explorer that is present only in certain versions. If the required version is not present on the local machine, you can provide alternative functionality or prompt the user
to upgrade". Maybe something there occured. Or do you use the WebBrowser control?
Is Visual Studio 2010 on the Win 7 64 bit machine? If so does that app not work in that too?
Did you compile the app to AnyCPU rather than X86 or X64 or try to compile it to one of the other two to see if that corrected the issue?
There's obviously something going on which you've not taken into account from a to b.
Please BEWARE that I have NO EXPERIENCE and NO EXPERTISE and probably onset of DEMENTIA which may affect my answers! Also, I've been told by an expert, that when you post an image it clutters up the thread and mysteriously, over time, the link to the image
will somehow become "unstable" or something to that effect. :) I can only surmise that is due to Global Warming of the threads.

DWCC core JavaScript error: "while executing translateCustomControl in ExternalRenderers.htm..."

Since upgrading to the October release, I have been getting this error dozens of times per day. It seems to happen when changing which window is in focus to another program, while in the middle of saving a file in DW. This is a JavaScript error WITHIN Dreamweaver's core code, it has nothing to do with any file that I am editing, it happens regardless of which file type I am working on and/or saving.
Here's the error message: "while executing translateCustomControl in ExternalRenderers.htm, a JavaScript error occurred." It is not always the translateCustomControl function, but it is always from the ExternalRenderers.htm file.
I'm running Dreamweaver CC 2014 on Windows 8.1
Any help is appreciated... thanks!

As I recall, this is a bug and someone has mentioned it before.
If I were you I would send a bug report to:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en

Javascript errors while adding attachment to list on ribbon sp 2013

Hi All,
Javascript errors while adding attachment to list sp 2013
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; .NET4.0C; .NET4.0E; InfoPath.3)
Timestamp: Mon, 20 Oct 2014 09:49:13 UTC
Message: Object required
Line: 1
Char: 122565
Code: 0
URI:
https://server.com/_layouts/15/form.js?rev=PxBF2F2E04Ut1YUooXDAbg%3D%3D
Screen become blank and nothing is dosplayed when attach item is clicked for custom list
Ravi

Hi Ravi,
According to your description, my understanding is that you encountered the error "Object required" when you try to add attachment to list in SharePoint 2013.
For your issue, you can refer to the blog:
http://kiran-kakanur.blogspot.com/2010/02/how-to-resolve-object-required-error-in.html
Best Regards,
Eric
Eric Tao
TechNet Community Support

Getting javascript error while selecting the Recipients in OBIEE delivers.

Hi All,
I am working on OBIEE from quite a long time, but recently I came across a error while selecting the Recipients in Recipients list of OBIEE delivers.
Making it more comprehensive, when I try to create an ibot , after entering all necessary information when I select Recipients in Recipients list and click on ok. I get a JavaScript error "null" is null or an object. The surprising thing is when i select cancel it works as ok.
Any help will be highly appreciated
Thanks,
Jyoti
Message was edited by:
user616430

I think you dont have a field named /BIC/XXXXXX in the table from which you are trying to fetch the data. Chech the spelling of the field name and table name.

Javascript error calling a bi 7.0 webapplication from a bsp application

Hi everyone,
This is the scenario we're facing a javascript error :
Enterprise Portal is calling a custom bsp application ( via an iview in the enterprise portal ) in the bi system with a parameter "template_id" and a value, which is the technical name of a bi web application.
The bsp application is evaluating the parameter by some custom code and creating a html page with a redirect or a maintenance message to the bi web application passed with the parameter "template_id".
The html link to the bi web application is created according to this documentation :
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/46/03d4ac801467e6e10000000a1553f6/content.htm
Purpose of the bsp application :
in the bi system there is a database table to maintain a flag for each webtemplate and infocube, which should not be called via the enterprise portal for a certain time ( some kind of maintenance switch ). The bsp application then decides to show a maintenance page for the called webtemplate or to send the redirect page to the client.
The process described above is :
working with the bi 7.01 sp7 in the bi ( enterprise portal sp22 ) in the productive system.
working in the Q&A system bi 7.01 sp8 with bi 3.5 web applications.
not working in the Q&A system bi 7.01 sp8 with bi 7.0 web applications.
The javascript error calling bi 7.0 web applications is :
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET4.0C; .NET4.0E)
Timestamp: Mon, 6 Jun 2011 09:11:04 UTC
Message: Object doesn't support this property or method
Line: 96
Char: 11
Code: 0
URI: https://mlptb1.mlp-ag.com:58001/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?TEMPLATE=B_221_002_KUNDEN_POSTEN_AD
We've opened a message. Support center is saying that this method isn't supported by sap. We should ommit the bsp application and the used functionality.
Is there any way to find out, what is causing this object is missing ?
Is there another way than a bsp application to use this custom maintenance function in the described system setup ?
system components :
production system
SAP NetWeaver 7.0 Portal SP22
SAP BI 7.01 SP 7
q&a system
SAP NetWeaver 7.0 Portal SP22
SAP BI 7.01 SP 8
Kind regards.
Dirk

Hello everyone,
we did some further analysis on this problem und we think we found the problem.
The error occurs while trying to execute the standard url for web templates inside a Enterprise Portal Frame, for example
https://XXX:XXX/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?TEMPLATE=XXX
While executing the URL a HTML-Page with some embeded Javascript-code is sent back to the browser.
In this Javascrip-Code, the method-call "dsmObj.registerAll" leads to a script error in Internet Explorer.
dsmObj.registerAll("pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex", "GUSID:6FC9SuhGDPIMMLwOdeHEIg--_7WQud13yeLJDz2kYoQFSg--", "1307605928212");
In SP7, the method "dsmObj.registerFullKey" is called instead of "dsmObj.registerAll". This has changed in SP8.
dsmObj.registerFullKey("GUSID:iBPvyska9*xE_JBalkQG2g--YyKv2C3NToP0I79Mw7EO8w--", "1307606479963");
The object "dsmObj" seems to reference the parent frame of the Enterprise Portal.
Has anyone seen this before? Any ideas how we can fix this?
Kind regards,
Matthias
Edited by: Matthias Keller on Jun 9, 2011 2:07 PM

Dreamweaver 6 launch error - JavaScript error bcinit

Hi
I have DW6 latest version running on Win XP SP3 and am all of a sudden getting the strangest bug (I have reported it), but I am wondering if anyone else has seen it or has any ideas how to fix it?
FYI I have already tried completely uninstalling Creative Cloud, rebooting, running the Creative Clean utility to remove all traces of any suite and then reinstalling Creative Cloud (takes hours ) and still have the same problem which is as follows below (FWIW I have never used BusinessCatalyst, either):
I launch DW and get the following error message "While executing onLoad in BusinessCatalyst.htm, the following JavaScript error(s) occurred: In file "BusinessCatalyst": bcinit is not defined"
When I try to open a file I get the following error message "The following translators were no loaded due to errors: ASP.NET: has configuration information that is invalid. BCDynamicTranslator.html: has configuration data that is invalid. BCStaticTranslator.html has configuration information that is invalid. XSLTransform.htm: has configuration data that is invalid"
Once I clear the dialog DW loads. However, when I attempt to save a file I then get the message "While executing onLoad in _beforeSave.htm, the following JavaScript error(s) occurred: In file "_beforeSave": beforeSave is not defined"
In addition, the space in the Help menu for Updates is simply blank and there is no Edit > Paste item either (just an empty space).
One other clue is that after I reinstalled Creative Cloud and BEFORE I applied the latest updates it seemed DW ran OK (it was a quick check, so I might be wrong).
The problems above are rendering DW unuseable to me at the moment, and it is totally bizarre they remain after a complete reinstall, so any clues on what has happened/how to fix it would be greatfully received!
Thanks!

Hi John
So many thanks for that. I tried step 4 and deleted 2 WinFileCache files (neither of which were called what they said they were) and restarted DW and it now (so far!) seems to work again.
I have no idea what went wrong, but I am up and running again, so MUCHOS thanks again for your swift repsonse!
atb

Dreamweaver 6.1 - JavaScript error when switching between open tabs

When switching between open tabs a sequence of javascript
errors occurs. I had not used Dreamweaver for about 2 weeks, and
last time I used it with no problems.
I have tried uninstalling it, OKing removal of all files when
asked, re-installing it and updating with dwmx61_updater.exe, but I
still get the same errors.
This has rendered the software virtually unuseable, so any
help would be greatly appreciated, as I'm working to a
rapidly-approaching deadline.
"While executing Browse_Back enabled in toolbars.xml, a
JavaScript error occurred"
followed by
"While executing Browse_Forward enabled in toolbars.xml, a
JavaScript error occurred"
followed by
"While executing Browse_Stop enabled in toolbars.xml, a
JavaScript error occurred"
The relevant code seems to be :

<toolbar id="Browser_Toolbar" platform="win"
label="Browser Navigation" container="document"
initiallyVisible="false">
<button id="Browse_Back"
image="Toolbars/images/MM/back.gif"
disabledImage="Toolbars/images/MM/back_dis.gif"
tooltip="Back"
label="Back"
enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
command="dw.getDocumentDOM().browser.backPage()"
update="onEveryIdle"/>
<button id="Browse_Forward"
image="Toolbars/images/MM/forward.gif"
disabledImage="Toolbars/images/MM/forward_dis.gif"
tooltip="Forward"
label="Forward"
enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
command="dw.getDocumentDOM().browser.forwardPage()"
update="onEveryIdle"/>
<button id="Browse_Stop"
image="Toolbars/images/MM/stop.gif"
disabledImage="Toolbars/images/MM/stop_dis.gif"
tooltip="Stop"
label="Stop"
enabled="dw.getDocumentDOM().browser.getPageBusy()"
command="dw.getDocumentDOM().browser.stopPage()"
update="onBrowserPageBusyChange"/>
<button id="Browse_Refresh"
image="Toolbars/images/MM/browserRefresh.gif"
tooltip="Refresh"
label="Refresh"
enabled="true"
command="dw.getDocumentDOM().browser.refreshPage()"/>
presumably the next error is caused by the previous ones
failing :
"While executing getCurrentValue in AddressURL.htm, a
JavaScript error occurred"
the relevan tcode :
function getCurrentValue()
var dom = dw.getDocumentDOM();
var value = dom.browser.getURL();
if (value && value.length)
//check if is it not a temp file
//extract the tail of the url
var filename = value;
var slashIndex = filename.lastIndexOf("/");
filename = filename.substring(slashIndex+1);
var tempIndex = filename.indexOf("TMP");
if (tempIndex != 0)
addRecentAddress(value);
return value;

You can try this simple fix -
Quit DW.
Find this folder -
C:\Documents and Settings\<username>\Application
Data\Macromedia\Dreamweaver
8\Configuration\WinFileCache-*.dat
(these folders are normally hidden - you may have to use
Explorer > Tools >
Folder Options to unhide them)
and delete it.
Restart DW. Works better?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"earthdoctor" <[email protected]> wrote in
message
news:[email protected]...
> When switching between open tabs a sequence of
javascript errors occurs. I
> had
> not used Dreamweaver for about 2 weeks, and last time I
used it with no
> problems.
>
> I have tried uninstalling it, OKing removal of all files
when asked,
> re-installing it and updating with dwmx61_updater.exe,
but I still get the
> same
> errors.
>
> This has rendered the software virtually unuseable, so
any help would be
> greatly appreciated, as I'm working to a
rapidly-approaching deadline.
>
>
> "While executing Browse_Back enabled in toolbars.xml, a
JavaScript error
> occurred"
> followed by
> "While executing Browse_Forward enabled in toolbars.xml,
a JavaScript
> error
> occurred"
> followed by
> "While executing Browse_Stop enabled in toolbars.xml, a
JavaScript error
> occurred"
>
> The relevant code seems to be :
>
> 
>
> <toolbar id="Browser_Toolbar" platform="win"
label="Browser
> Navigation"
> container="document" initiallyVisible="false">
>
> <button id="Browse_Back"
> image="Toolbars/images/MM/back.gif"
> disabledImage="Toolbars/images/MM/back_dis.gif"
> tooltip="Back"
> label="Back"
>
enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
> command="dw.getDocumentDOM().browser.backPage()"
> update="onEveryIdle"/>
>
> <button id="Browse_Forward"
> image="Toolbars/images/MM/forward.gif"
> disabledImage="Toolbars/images/MM/forward_dis.gif"
> tooltip="Forward"
> label="Forward"
>
enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
> command="dw.getDocumentDOM().browser.forwardPage()"
> update="onEveryIdle"/>
>
> <button id="Browse_Stop"
> image="Toolbars/images/MM/stop.gif"
> disabledImage="Toolbars/images/MM/stop_dis.gif"
> tooltip="Stop"
> label="Stop"
> enabled="dw.getDocumentDOM().browser.getPageBusy()"
> command="dw.getDocumentDOM().browser.stopPage()"
> update="onBrowserPageBusyChange"/>
>
> <button id="Browse_Refresh"
> image="Toolbars/images/MM/browserRefresh.gif"
> tooltip="Refresh"
> label="Refresh"
> enabled="true"
> command="dw.getDocumentDOM().browser.refreshPage()"/>
>
>
>
> presumably the next error is caused by the previous ones
failing :
>
> "While executing getCurrentValue in AddressURL.htm, a
JavaScript error
> occurred"
> the relevan tcode :
>
>
> function getCurrentValue()
> {
> var dom = dw.getDocumentDOM();
> var value = dom.browser.getURL();
> if (value && value.length)
> {
> //check if is it not a temp file
> //extract the tail of the url
> var filename = value;
> var slashIndex = filename.lastIndexOf("/");
> filename = filename.substring(slashIndex+1);
> var tempIndex = filename.indexOf("TMP");
> if (tempIndex != 0)
> {
> addRecentAddress(value);
> }
> }
> return value;
> }
>
>

On my iPad 2 I can nolonger view maps. It says there are JavaScript errors. How can I fix this problem?

On my iPad 2 I can nolonger view maps. It says there are JavaScript errors. How can I fix this problem?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

Report Viewer Javascript error

I have a good report that works great if I export to pdf.
objdoc.ExportToDisk (ExportFormatType.PortableDocFormat, "c: \ \ testreport.pdf");
When I load the CrystalReportViewer
CrystalReportViewer1.ReportSource = objdoc;
returns a javascript error:
TreeWidget_getHTML JScript
file:
allinOne.js
this instruction:
to for (var D in E) {B [C + +] = E [D]. getHTML (F.initialIndent, D == 0)
because b[c++] is undefined for some values ...
The only problem I have when I load the report in the ReportViewer.
The old crystalreportviewer 10.0.53 works on VS2008 now i like import this aspx on VS2010 but i have this problem.

Is there any resolution for the above issue?
I have the similar problem.
To reproduce the error just add a reference to a js script file in the page head:
<script src="/Scripts/ClassExtentions.js" type="text/jscript"></script>
where the Array prototype has an extension like: "Array.prototype.testing = true;"
on loading the page an error occurs in treeview.js TreeWidget_getHTML() function:
..sub[i].getHTML < is undefined (Object doesn't support this property or method) = no getHTML function.
Verifying function (prototype property) availability is missing from other code parts as the next error is in palette.js PaletteWidget_init function:
..item.init() < is undefined = no init function for the runtime object, item..
tryed this fix (works fine):
treeview.js line 711
for (var i in sub)
if (sub[i].getHTML) a[j++]=sub[i].getHTML(o.initialIndent,i==0)
best regards, Zsolt

JavaScript error on Interactive Report

When clicking on the Magnifying glass of my interactive report search bar, I receive a JavaScript error.
Line: 2 Char: 15193 Error: Syntax Error
The page that I am navigating to has 2 regions. The first is an interactive report and the second is an html region that has an Iframe reference to another interactive report. Based upon the selection of a radio group, the corresponding region(interactive report) displays. All other interactive reports work fine when their pages don't have a region with a Iframe reference.
If I navigate to another page after the error occurs and then come back to the page, everything then works fine. The error only happens on the first use. I have installed the latest patch set for Apex 3.2 I currently am running 3.2.1.00.11. I read a bug on Metalink that referenced this javascript error, but applying the patch set does not seem to fix the issue. The bug was 8568894.
Any help would be appreciated.

This might be useful for others also...
After hours and hours of debugging headers and responses and comparing pages to others which work, I realised that this interactive report's display condition is based on REQUEST = SUBMIT.
As such, the actions menu will NOT set the Request parameter when clicking in the actions menu and the Apex engine refuses to send anything back to the browser - not even an error message.
I'll raise a bug for this via Oracle Support.
Cheers, Pete

Help! Why am i getting these JavaScript errors in Dreaweaver and how can I fix it???

This only happens whenever I try to access code view, and it won't allow me to add any more code. This is the error message I get:
"While executing DWMenu_View_Text command in menus.xml, the following JavaScript error(s) occurred:
Exception thrown in native function"
A third party tried to access my site, but the page froze, with an error message:
"Script error on line........."
I'm not sure if this has something to do with FileZilla, but now when I try to open it, I get number of error messages about, "failed to write xml file" and "Application Data\FileZilla\filezilla.xml (error 5: access is denied.)"
I've tried deleting the WinFileCache from Dreamweaver and disabled all extensions, but none of these helped.
Please help. does anyone know what's going on?

I've never heard of a Filezilla DW extension, but this is the KB article for you:
http://kb2.adobe.com/cps/405/kb405604.html

Javascript error when opening Tag editor

I have been using dreamweaver 8 for the last month or so. all
of a sudden a couple of days a go it started to give me the same
error every time i right clicked an input element and clicked the
'Tag Edit <Input>'.
The error reads
"While executing onLoad in input.htm, a JavaScript error
occurred."
Any ideas?
I have already tried the repair option in Add/Remove
Programs, and that didnt work
I then tried the Remove option, and then completely
reinstalled it to no prevail
Thankyou for any suggestions you may have

See if this helps:
Troubleshooting JavaScript errors in Dreamweaver
http://www.adobe.com/go/19105
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au
CSS Tutorials for Dreamweaver
http://www.adobe.com/devnet/dreamweaver/css.html
"Jay6390" <[email protected]> wrote in
message
news:esqm83$if1$[email protected]..
>I have been using dreamweaver 8 for the last month or so.
all of a sudden a
> couple of days a go it started to give me the same error
every time i
> right
> clicked an input element and clicked the 'Tag Edit
<Input>'.
>
> The error reads
> "While executing onLoad in input.htm, a JavaScript error
occurred."
>
> Any ideas?
> I have already tried the repair option in Add/Remove
Programs, and that
> didnt
> work
> I then tried the Remove option, and then completely
reinstalled it to no
> prevail
>
> Thankyou for any suggestions you may have
>

Javascript errors in DW CC 2014 (win7)

Similar Messages

Maybe you are looking for