Javascript for custom Exit button on Saba LMS with SCORM 2004 v3 requirements.

What should I add to the javascript panel on a custom exit button in Captivate to properly exit a course uploaded to a Saba LMS with SCORM 2004 requirements?

I can confirm that the approach recommended by georgeyp worked for me with Captivate 5.5 and Saba. After publishing in Captivate, I opened the SCORM zip package and edited the imsmanifest to remove the masteryscore line. It seems that the LMS has nothing to compare to the 0 score value passed by Captivate and so it does not move the incomplete course to the Transcript and mark it ‘Unsuccessful’.
I did not have an issue with the course getting stuck on the first screen and just showing the LMS initialization text.
Note that I also tried the additional code (suggested but not guaranteed by Saba) and it did not solve the problem. I also tried using the 'SendTrackingDataAtEnd' SCORM template available in Captivate under Preferences > Quiz > Reporting. It did not solve the problem either.

Similar Messages

Error in the ABAP Code for Customer Exit Variable

Could you please update me what is the wrong with the below ABAP Code developed for Customer Exit Variable in BW
i created a Variable (ZVWKNO) of Customer Exit,Single Value ,Mandatory and Variable is ready for input
In CMOD i had written the below Code:
When 'ZVWKNO'.
DATA: WEEK(2) TYPE N,
WEEKNO(2) TYPE N.
IF i_step = 1.
l_st_date = SY-DATUM.
CALL FUNCTION 'DATE_GET_WEEK'
EXPORTING
DATE = l_st_date
IMPORTING
WEEK = l_fn_week.
CHECK sy-subrc = 0.
WEEK = l_fn_week+4(2).
If WEEK 0.
WEEKNO = WEEK - 1.
l_s_range-low = WEEKNO.
l_s_range-sign = k_sign_inclusive.
l_s_range-opt = k_option_equals.
APPEND l_s_range to e_t_range.
ENDIF.
ENDIF.
But when i execute the query the default value is not populated with Week-1 No in the variable screen
Please update me what went wrong
Thanks

Case ZVWKNO.                "write this with out comments
When '1'.              "write the value that needs to equal with value in varaible ZVWKNO after when in sungle quotes
DATA: WEEK(2) TYPE N,
WEEKNO(2) TYPE N.
IF i_step = 1.
l_st_date = SY-DATUM.
CALL FUNCTION 'DATE_GET_WEEK'
EXPORTING
DATE = l_st_date
IMPORTING
WEEK = l_fn_week.
CHECK sy-subrc = 0.
WEEK = l_fn_week+4(2).
If WEEK 0.                                    "check this Week Minimum is '01' and Maximum '52'
WEEKNO = WEEK - 1.
l_s_range-low = WEEKNO.
l_s_range-sign = k_sign_inclusive.
l_s_range-opt = k_option_equals.
APPEND l_s_range to e_t_range.
ENDIF.
ENDIF.
Prabhudas

Variable Offset for Customer Exit??

Hi,
is it possible to have a variable offset for customer exit time variables?
E.g. I have a variable current month but can I also create a one-year offset of that?
In our system that doesn't work (but also the current month variable doesn't work...)
thanks
Sabine

Hi,
As it is mentioned by Mr.Voodi,it definately works.
You only has given the answer for your problem .i.e you need to make sure the Customer exit variable is working proper.So take a look on the code used for it.
With rgds,
Anil Kumar Sharma .P

ABAP Help for customer exit

Hi All, I need help with ABAP code for customer exit for formula variable. I have ZVKDATE as formula var from customer exit. user enters date in ZVKEYDT(this is selection type var). I have the below code, I debugged it the l_var_range-low get the date but when I append it to e_t_range the table doesn't gets the date. The report shows the ZVKDATE has empty demarcation. kindly help.
data l_var_range like rrrangeexit.
data: l_s_range type RSR_s_RANGESID.
data: w_day(2) type c,
      w_mth(2) type c,
      w_year(4) type c.
define append_range_table.
l_s_range-low = &1.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
append l_s_range to e_t_range.
end-of-definition.
*Activities performed before selection screen pop-up window
if i_step = 2.
Calculate the current date based on system date
case i_vnam.
    when 'ZVKDATE'.
      read table i_t_var_range into l_var_range
                        with key vnam = 'ZVKEYDAT'.
      l_s_range-sign = 'I'.
      l_s_range-opt = 'EQ'.
      w_day = l_var_range-low+6(2).
      w_mth = l_var_range-low+4(2).
      w_year = l_var_range-low(4).
      concatenate w_year w_mth w_day into l_var_range-low.
      append l_s_range to e_t_range.
endcase.
endif.
puneet

Hi,
Check your code again. You are not appending l_var_range but l_s_range. Also I think the concatenate statement should contain l_s_range-low instead of l_var_range-low.
Hope this will help you.
Regards,
Vaibhav

Change package for Customer Exit

How can I change a package for Customer Exit? I can't find the Cusomter Exits project by using SE80 transaction... :/

Hi
To change the package for the customer exit
1) use tcode CMOD
2) frm the GOTO menu , choose OBJECT DIRECTORY ENTRY.
3.in the OBJECT DIRECTORY ENTRY , go to change mode , frm there u can change ur package also.
Assign points if helpfull
From
ManesH

Coding for Customer-Exit Variables

Hi experts,
We have some variables in BEX with Customer-Exits.
I want to see the codings and i do following.
1- Tcode u201CCMODu201D and enter u201CProject Codeu201D go tou201DComponentsu201D.
2- Double Click on EXIT_SAPLRRS0_001
3- Double Click on INCLUDE ZXRSRU01
But I dont see anycoding here.
Where should be the codings for Variables with Customer-Exits hidden?
Do you have any idea, thank you.

Hi,
The Include which you are seeing is for only the customer space. This is for Customer exit variables created by Developers. So Here if there are any routines written by the Developers will be there. Initially it will be Blank.
If you want to See the standard SAP Exits goto SMOD.
Regards
Karthik

Where do I write the code for customer exit variable?

Hi Gurus,
Can anyone tell me where and the procedure that I have to follow to get to the include ZXRSRU01 where I can write customer exit variable code.
I know its written in ZXRSRU01, but in my system it seems like its not active or does not exist. How do I get to start working in this include for customer exit variables?
Any help is appreciated. Thank you.
Regards
Reddy

hi Reddy,
variable exit use enhancement RSR00001 not RSAP0001. EXIT_SAPLRRS0_001.
try to follow some steps in 'how to' doc related to this, and sample code may useful for you
https://websmp206.sap-ag.de/~sapdownload/011000358700002762582003E/HowToDeriveVariableValue.pdf
https://websmp206.sap-ag.de/~sapdownload/011000358700002765042003E/HowToVerifyVariableInput.pdf
INCLUDE ZXRSRU01                                                   *
DATA: L_S_RANGE TYPE RSR_S_RANGESID.
DATA: LOC_VAR_RANGE LIKE RRRANGEEXIT.
CASE I_VNAM.
WHEN 'CUMMONTH'.
    IF I_STEP = 2.                                  "after the popup
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
              WHERE VNAM = 'MONTH'.
        CLEAR L_S_RANGE.
        L_S_RANGE-LOW      = LOC_VAR_RANGE-LOW(4)."low value, e.g.200001
        L_S_RANGE-LOW+4(2) = '01'.
        L_S_RANGE-HIGH     = LOC_VAR_RANGE-LOW.   "high value = input
        L_S_RANGE-SIGN     = 'I'.
        L_S_RANGE-OPT      = 'BT'.
        APPEND L_S_RANGE TO E_T_RANGE.
        EXIT.
      ENDLOOP.
    ENDIF.
ENDCASE.
hope this helps.

Still struggling with Captivate 6, Oracle LMS and SCORM 2004

Still can't get this course tracking with scores. Herewith the screen shot. Does anyone know if the settings I have chosen for the quiz are correct. When I load the published course into the lms and test it, it shows "not attempted" prior to opening it and it gives the final score on the last quiz slide. There is a slide after the last quiz slide. It still seems not to transfer the scores to the lms. I recently found out that we have Scorm 2004 version 4, so I changed the configuration setting as it was defaulted to version 3, but that still hasn't helped with the scores. Under the start and end settings, I have chosen close project for the end. I have been through a week of torture with this course! Please can anyone assist as I'm not sure what to do anymore!

Oh no. Now I'm panicking! I will try it. Thanks
Mrs T Cassisa
Oracle Learning Management Practitioner
Tel: 27 (21) 403 3069
Fax: 27 (21) 403 3333
www.parliament.gov.za
>>> RodWard <[email protected]> 2/26/2014 11:20 AM >>>
Re: Still struggling with Captivate 6, Oracle LMS and SCORM 2004
created by RodWard in Quizzing/LMS - View the full discussion
This sounds like you have some major issue in this course project file.
Breaking it up into smaller files might not fix your issue.
I suggest you create a new blank CPTX project file, add one true/false quiz question, set it to report to LMS with the settings you have above, publish as a single SCO package zip file, and upload to both your LMS and SCORM cloud.
If this file doesn't even work, your installation of Captivate would have to be suspect and nothing you do in course module is going to fix that until you work out what the problem is. If this very simple single-SCO lesson plays OK and reports successfully to the LMS, then we need to figure out what is lacking in your current file.
It could be that your current file has somehow become corrupted. See the suggestions here for how to debug general corruption issues:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic- troubleshooting-techniques
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6158090#6158090
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6158090#6158090
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6158090#6158090. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Quizzing/LMS at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Custom Exit Button not working..looks for required input field on screen?

I defined this EXIT button as type E in Menu Painter.
I am using "MODULE At EXIT-COMMAND" in my PAI.
SAP message still asks for the required input field when I select the function EXIT button?
The logic still will not break into the At EXIT-COMMAND of my PAI?
Thank-You.

Hi
Have you assigned variable OK_CODE in the list of screen element?
IF NOT zin_railid is initial.
LEAVE TO SCREEN 0100.
ENDIF.
Which is the sense to create a button for exit-command and doesn't allow the exit if the input field is empty?
In SE41 I entered "Back" over the back button, "EXIT" over the exit button, and "CANCEL" over the cancel button.
I selected each one, and got a popup to enter "E" for each type. As I said they appear, but do nothing?
Did I need to set a status for these?
No you don't, it's only important to define a functional having the attribute for EXIT-COMMAND
Max
Max
Edited by: max bianchi on Nov 5, 2010 6:31 PM

Error Message : " No value could be determined for Customer Exit Variable "

Hello BI Experts ,
I have created a "ZYTD_PERIOD" Customer Exit Variable Interval Mandatory and ready for input check mark removed.
The reference character is '0FISCPER' .
I want to have YTD figures when the user enter single Fiscal Year Period for variable 0P_FPER.
So I have written below code in SE37 : EXIT_SAPLRRS0_001 and include program : ZXRSRU01
==================================================================
case i_vnam.
              WHEN 'ZYTD_PERIOD'.
              IF I_STEP = 2.
              LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = '0P_FPER'.
              CLEAR L_S_RANGE.
              L_S_RANGE-LOW0(4) = LOC_VAR_RANGE-LOW0(4).
              L_S_RANGE-LOW+4(3) = '001'.
              L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
              L_S_RANGE-SIGN = 'I'.
              L_S_RANGE-OPT = 'BT'.
              APPEND L_S_RANGE TO E_T_RANGE.
              EXIT.
              ENDLOOP.
              ENDIF.
===================================================================
After that I use this 'ZYTD_PERIOD' variable in the query .
Also I have used the variable 0P_FPER in another structure.
When I execute the query by entering the value of 0P_FPER as 010.2009 or any other value ,
I am getting below error message ,
*No value could be determined for variable ZYTDPERIOD*_
Below is details of this Error message ,
Note that I have proper Master and Text data for 0CO_AREA and 0COMP_CODE loaded into BI.
=======================================================================
Diagnosis
This error diagnosis is specific only to the variables 0P_FVAEX or 0P_CTPCA !
Termination message BRAIN 632 appears:
Could not determine value for variable 0P_FVAEX (or 0P_CTPCA).
System Response
1. Operation method of SAP-Exit-Variables 0P_FVAEX or 0P_CTPCA
With queries from the CO application, both SAP-Exit-Variables look for an entry for 'controlling area'. With this controlling area from the selection screen, the SAP-Exit-Variables program reads the attributes for InfoObject 0CO_AREA (controlling area).
With queries from the FI application, the SAP Exit Variable 0P_FVAEX looks for an entry for 'company code'. With this company code from the selection screen, the SAP Exit Variables program reads the attributes for InfoObject 0COMP_CODE (Company Code).
0P_FVAEX determines the fiscal year variant (attribute 0FISCVARNT) from the attributes for 0CO_AREA (CO queries) or 0COMP_CODE (FI queries). 0P_CTPCA determines the currency type of the profit center local currency (attribute 0CURTP_PCA) from the attributes for 0CO_AREA.
2. Cause of Error
The attributes for the controlling area (InfoObject 0CO_AREA) or company code (InfoObject 0COMP_CODE) were not loaded into the BW system, or the attributes for the controlling area are not active in the BW system.
Check whether this is the cause of the error in your BW system. Display the contents of table /bi0/mco_area or /bi0/mcomp_code using transaction se16.
Application CO:
Check whether the attributes 'fiscal year variant' (field FISCVARNT) and 'profit center local currency currency type' (field CURTP_PCA) are filled in the 'A' version (field OBJVERS) for the selected controlling area. If the fiscal year variant in the OBJVERS = 'A' is empty, then the error is with variable 0P_FVAEX. If the currency type of the profit center's local currency in OBJVERS = 'A' is empty, then the error is with variable 0P_CTPCA.
Application FI:
Check whether or not the attribute 'fiscal year variant' (field FISCVARNT) is filled in the 'A' version (field OBJVERS) for the selected controlling area. If the fiscal year variant is empty in OBJVERS= 'A', then the error is with variable 0P_FVAEX.
Procedure
Using InfoSource 0CO_AREA, load the attributes for the controlling area or company code into your BW system.
Afterwards, activate the attribute changes in your BW system. To do this, use transaction rsa1, path 'Tools > Hierarchy/Attribute changes', functions button 'InfoObject list'. Choose InfoObject 0CO_AREA or 0COMP_CODE from this list, and activate the attribute changes.
=====================================================================================
Is there any special settings needed before writing BEx Customer Exit ?
I have already created a project in CMOD and assinged a proper RSR00001
and EXIT_SAPLRRS0_001 and project is active.
Any help please ....
Regards ,
Amol

My Code is as below ,
          case i_vnam.
              WHEN 'ZYTD_PERIOD'.
              IF I_STEP = 2.
              LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = '0P_FPER'.
              CLEAR L_S_RANGE.
              L_S_RANGE-LOW0(4) = LOC_VAR_RANGE-LOW0(4).
              L_S_RANGE-LOW+4(3) = '001'.
              L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
              L_S_RANGE-SIGN = 'I'.
              L_S_RANGE-OPT = 'BT'.
              APPEND L_S_RANGE TO E_T_RANGE.
              EXIT.
              ENDLOOP.
              ENDIF.
              ENDCASE.

Problem in creating include program for customer exit for BC425_01

Hi,
I want to write a customer exit for transaction BC425_01. For identifying the include program for exit , i go to System->Status.There I double click on the program name(GUI).Then I perform a 'FIND' in main program for 'customer-function' keyword. I get 3 search results with "CALL CUSTOMER-FUNCTION '001' " , "CALL CUSTOMER-FUNCTION '002' " , "CALL CUSTOMER-FUNCTION '003' ".
Now i double click on CALL CUSTOMER-FUNCTION '001' and i am taken to the code of program where this function is called in MODULE cust_check INPUT. I double click on CALL CUSTOMER-FUNCTION '001' and then I am taken to the function module code which contains a single statement 'INCLUDE ZXBC425G01U01 .' .
Now I double click on this include program so that I can write my own code. But when i double click on it , a message displayed 'Program names ZX.. are reserved for includes of exit function groups'. Hence I am not able to creates this include program and write my coding.
Kindly Help
THANKS

Hi Amber,
Then you click enter button.It is asking to create object with that include name ZXBC425G01U01 in a pop-up.You should select YES option.It will ask package . Give the package name and save.Then include program is created and allowed you to write your own code.
Thanks,
Prasad GVK.

Exit button writing to LMS

We are using Captivate 2 with a SABA LMS. Captivate generates
an exit button "x" at the bottom of the player (along with the
rewind button, etc). We are finding that people use this button to
exit the course - and it works - but does not write the completion
status to the LMS. My question is: Can that exit button be
programmed to write the completion status to the LMS.
Thanks

I don't think so.
Two options?
1. Modify the playback bar so it does not include the X
button.
2. Determine what function the Captivate file is calling when
it is
exited the 'desired way' and place that call in an Unload
property of
the body tag.
Can't guarantee either will work, but possible options...
What happens if they click the browser's X button?
Erik
ssarcheck wrote:
> We are using Captivate 2 with a SABA LMS. Captivate
generates an exit button
> "x" at the bottom of the player (along with the rewind
button, etc). We are
> finding that people use this button to exit the course -
and it works - but
> does not write the completion status to the LMS. My
question is: Can that
> exit button be programmed to write the completion status
to the LMS.
>
> Thanks
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/group/macromedia.authorware

Custom Exit Button not working

I am using Captivate 6. I have a 'Save & Exit' button. On success I have javascript being executed and the code being: javascript:window.close()
When I preview in my web browser (chrome) nothing happens when I select this button. Any help?
I have attached a screen shot.
Many Thanks.

Hi Mike
Just for testing purpose, create a new slide in your project or you can create a new project and in the new/blank slide insert a button. Apply the javacript window.close(); or window.close()
Preview the project or web browser or publish and test the same in the web browser and then observe, you are facing the same issue or not. If it works, then change the javacript which I provided to you.
Thanks
VJ

How to capture user input for customer exit processing?

I need to calculate the number of working days elapsed in the current fiscal quarter BASED on the USER INPUT on the reporting front. i.e., say the fiscal quarter started on 1 July 2005 and if the user enters 10 July 2005, I should get the value 8 (Assume that Monday through Friday are all workdays). If the user enters 12 July 2005, I should get 10. I have written customer exits and know how to use factory calendar, but <b>THE CHALLENGE</b> is how do I <b>CAPTURE</b> the user input and use it in my exit? During the varible definition, if I select the check box "Ready for input" then the customer exit is not being processed and unless I check that box I can't get a user entry! If I look at the import values in the customer exit, I see i_t_var_range with type rrs0_t_var_range. My strong feeling is that this parameter gets the user input, but I am unable to use it as the customer exit is not being called if I make the user to input the data. Based on the empirical evidence, I felt that user input and customer exit can not co-exist!! Please somebody prove me wrong and let me know how can I use the user input to process my "customer-exit" variable. I would really appreciate any input from the BW community here.

Hi Sameer,
Most likely, I'm missing something, but I think that the answer is very simple.
CASE I_VNAM.
WHEN 'YOUR_CUSTOMER_EXIT_VAR'.
IF I_STEP = 2. After selecting of input variable
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'USER_INPUT_VAR'.
CLEAR L_S_RANGE.
L_S_RANGE-LOW = LOC_VAR_RANGE-LOW(4).
APPEND L_S_RANGE TO E_T_RANGE.
ENDLOOP.
ENDIF.
ENDCASE.
In this typical user exit coding you have a user entered value in LOC_VAR_RANGE (originally in I_T_VAR_RANGE) and you construct your user exit variable value in E_T_RANGE.
Best regards,
Eugene
Message was edited by: Eugene Khusainov

Function module needed for customer exit variable need to use in Bex report

Hi Experts,
I have a requirement where i need to get Cummulative result between two interval periods.
If user gives single mandatory input value - 002-2009
for one Scenario:-
Project start Date untill Pervious year i.e December 2008
Where project start date will get from one of the field in my BW CUBE
can anyone help for the customer exit function code for this scenario. As i am into BI i dont have idea in ABAP.
Please help sample cod for this .
Thanks,
Anil.

I had created one customer exit which had fullfill my requirement.

Javascript for custom Exit button on Saba LMS with SCORM 2004 v3 requirements.

Similar Messages

Maybe you are looking for