Javascripts – check boxes not returning proper values

Hi All, not sure if this is the right place for this post... but here goes....
here's the url:
http://theexperience-exchange.co.uk/Mods_appleit.html
The contact form generates and e-mail. At the moment the results form the checkboxes look like this:
$1_month
$6_months
$12_months
You can see that they aren't working... If only one is checked, they ALL show up! I know there's some html and JS needed.... looking on the web is driving me round the bend.
Any simple solutions that anyone knows about would be greatly appreciated.
All the best, RP

Unless you want them to have the ability to click 1, 2 or 3 of those boxes, it would be best to use a group of radio buttons. That way, only one can be clicked and only the value of the clicked button will return to you.

Similar Messages

Pl/sql package for use with workflow will not return a value

hi all,
just trying to intercept a requisition being turned into an order if it uses a certain cost code. so i have amended the workflow and created a package to check what cost centre a requisition is using. how over the workflow stops on the function that calls the package witha a status of complete as if the package is not returning any values.
the package is as below:
CREATE OR REPLACE PACKAGE APPS.xxhccWFcapitalcheck AS
procedure XXHCC_CHECK_CAPITAL(itemtype in varchar2,
itemkey in varchar2,
actid in number,
funcmode in varchar2,
resultout out NOCOPY vARCHAR2);
END xxhccWFcapitalcheck;
CREATE OR REPLACE PACKAGE BODY APPS.xxhccWFcapitalcheck AS
procedure XXHCC_CHECK_CAPITAL(itemtype in varchar2,
itemkey in varchar2,
actid in number,
funcmode in varchar2,
resultout out NOCOPY varchar2 ) is
x_progress varchar2(100);
x_resultout varchar2(30);
l_doc_mgr_return_val VARCHAR2(1);
l_doc_string varchar2(200);
l_preparer_user_name varchar2(100);
doc_manager_exception exception;
p_test varchar2(100);
l_req_id varchar2(30);
CURSOR p_line_id IS
SELECT
codes.segment2 cost_center
FROM
po_requisition_headers_all headers,
po_requisition_lines_all lines,
po_req_distributions_all dist,
gl_code_combinations_v codes
WHERE
headers.requisition_header_id = lines.requisition_header_id
AND
lines.requisition_line_id = dist.requisition_line_id
AND
dist.code_combination_id = codes.code_combination_id
AND
headers.segment1 = l_req_id;
line_rec p_line_id%rowtype;
BEGIN
-- Do nothing in cancel or timeout mode
--if (funcmode <> wf_engine.eng_run) then
-- resultout := wf_engine.eng_null;
-- return;
-- end if;
l_req_id := wf_engine.GetItemAttrNumber (itemtype => itemtype,
itemkey => itemkey,
aname => 'DOCUMENT_NUMBER');
--FOR line_rec in p_line_id
---loop
open p_line_id;
fetch p_line_id into l_doc_string;
close p_line_id;
IF p_line_id= 'Q9DEF'
dbms_output.put_line p_line_id;
Then resultout := 'COMPLETE:F';
return;
p_test := 'USE DIFFERENT CODE';
ELSE
resultout := 'COMPLETE:T';
return;
END IF;
END LOOP;
end;
END xxhccWFcapitalcheck;
any help would be great!

Hi Community, first of all, english is not my native language and im not sure to use the correct terms for PowerCenter - so if im wrong please help me correct and make clear what we need. We have a kind of 3-steps ToDo. First step: Load data from an external source into a "local" datastore (its an oracle db on a server in our "hands")Second step: Check data against several verifications, this is done with a PL/SQL Package. The PL/SQL Package shall be called with an Interfacename who is set in the First PowerCenter Mapping. Our current thoghts are to do this via a stored procedure, which runs as "Target Post Load" and gets a variable "Interface Name".Is that possible? Im not quite sure about it. About the last part its even more unclear how we can solve it:Third part should be switch back to PowerCenter now - and the package (or to be correct a function in the package) should return a value for "okay everything fine => workflow continue" or "something happened => workflow is stopped" Im not sure how i can handle this. I hope my explanations are good enough so you can provide some help?!If there are any questions please ask! Thank you alot, best regards, Christian

JDBC not returning proper result

Hi
I am trying to extract some information from data base
and i am writting this query
java.sql.Statement s = dbCon.createStatement();
ResultSet r = null;
r = s.executeQuery("select * from emp where description="+courseName);
If the course have value
description="Fundamental of Science"
then it says "syntax error at or near of"
and if description="SAD"
then it said error "column "sad" does not exist
means its converting to lower case
where, i am accepting the string value for description from a JSP page,
i am returning the value in the bean by using get set method
and i am writing the query in bean
i have checked that its returning the value properly for the parameter "description"
Please help

The SQL you need is
select * from some_table where some_column = 'abc def'Note the single quotes around the string literal "abc def". If you don't have the quotes, then abc is taken as a column name or alias, and the def part is just wrong syntax at that point.
The way to do this is with PreparedStatement.
PreparedStatement ps = conn.prepareStatement("select * from some_table where some_column = ?");
String colValue = "abc def";
ps.setString(1, colValue);
ResultSet rs = ps.executeQuery();The driver puts the quotes in for you, and handles any escaping that's necessary.
Edited by: jverd on Dec 1, 2010 3:51 PM

Parameter not returning all values

I have a crystal report built off an oracle DB. For one parameter it is not returning all values. I can display data or the entire table it shows me all values, but when i build a parameter it only shows me through August. It is a date/time field.

check the following thread
[Dynamic Parameter only showing 1000 records when Crystal report is run.;
regards,
Raghavendra.G

IE/ExternalInterface do not return any value if movie added with appendChild

There is a problem with IE/ExternalInterface if movie is added to DOM f.ex appendChild. JavaScript functions are called but they do not return any value.
MS first response was that this is 3rd party/Adobe problem.
Fixing this with innerHTML is not the solution. Using here Any suggestions ?
Simplified test case has
          var flashMovie = '<OBJECT id="testId" codeBase="http://fpdownload..
          // Works in IE and FF
        document.getElementById("testdiv").innerHTML = flashMovie;
          // ExternalInterface.call calls JS but does not return value in IE. Works in FF
          var tempDiv = document.createElement("div");
          tempDiv.innerHTML = flashMovie;
          document.body.appendChild(tempDiv);
Here is complete code
http://pastebin.com/fbc0aa9a
Here is AS3 code in for ajax.swf
http://pastebin.com/d4efd47b
-H

You are right about that duplicate id of the movie in this example, but that is not case here.
I appreciate if you try this and confirm that problem exist or any work-around.
Here is more explanation to original post:
In HTML is JavaScipt
function fromJs()
     return "text from js..";
that is called from AS3
var s = ExternalInterface.call("fromJs");
This "s" value and also ExternalInterface.objectID are null in AS3.
Here example again only with non-working case without that duplicate id with innerHTML
http://pastebin.com/f4e33af93
and also movie with AS3 code is attached.
Using plain innerHTML this case works
document.getElementById("testdiv").innerHTML = '<OBJECT..
and with appendChild does not work
var tempDiv = document.createElement("div");
tempDiv.innerHTML = "<OBJECT ..
document.body.appendChild(tempDiv);

LOV does not return the value (2)

PPR in general does not work correctly if invalid HTML is generated. One example of an invalid HTML is having an opening <TD> tag immediately following another opening <TD> tag.
After checking everything else, if LOV still does not return the value, test whether it's not a problem with the invalid HTML by placing the messageLovInput outside of the complicated layout nestings you may have. If it works outside of the layout nestings, look for the possible problems in the layout nestings.

Hi RamKumar,
Thanks for your reply.. I have already done that but no luck :(
Regards,
Hemanth J

When LOV does not return the value

Check that you are not calling setText(String) on the web bean to set the default value. It causes your bean to no longer draw the value from the underlying VO. One of the symptoms is that selecting a value from the LOV modal window will not return that value to the base page. (The value from the LOV will actually be set on the VO, but the UI won't reflect it.)
Setting the default value in the model layer is prefered. You can do this by overriding the create(AttributeList nameValuePair) method of OAEntityImpl or OAViewRowImpl.
If, for some reason, you need to set the default value from the client side, you need to call setText with the pageContext, e.g., setText(pageContext, "myDefault");

Hello
Upon giving your question further thought I think that you would be better off if you added an 'id' column to table T1 and referenced this 'id' column in table T2 . Something like
Table_T1(id number, c1 varchar2(100)
and
Table_T2(.other_columns.. ,t1_id)
Your LOV will now be select c1 display,id return from table_t1The column t1_id will be defined to use this LOV.
You will need no other modifications to the form on table_t2
Varad

When I click the iCloud button I get a browser with check boxes, not slider buttons and it does not have a "backup and storage" button. So I cannot set up backup.

When I open my iCloud browser it looks different than "normal." It shows the list with check boxes, not slider on-off buttons. It dos not show a "storage and backup" button so I cannot set up my backup. What is wrong?

If see something like the image below it's because you are looking at the iCloud settings on your Mac, not on an iOS device (which has sliders). Storage & Backup isn't in the Mac settings because you cannot back up your Mac to iCloud. Only iOS devices can back up to iCloud. On a Mac, you can get information about your iCloud account storage by looking at the green usage bar at the bottom and by clicking the "Manage..." button on the bottom right.

T-SQL: SET Statement Using a Case Statement is not returning a value

SQL VER: 2008
Please see the attached screenshot from SSMS. The Set statement below is not returned a value or may be returning a zero value. The AllocPercent field is set to zero in code preceeding this Update Statement:
AllocPercent
=
CASE
WHEN AllocBase
IS
NULL
OR AllocBase
= 0
THEN 0
ELSE PM_Input/AllocBase
END
As you can see by the screen shot from the Select Statement that is displaying the results after the Update Statement is completed, the value of AllocPercent is = 0 even though all the values necessary for it to compute a value > 0 are present in the
table. Incidentally, the values in both the AllocBase and PM_Input fields are the same before the Update Statement is ran, as shown in the Select ran after the Update Statement.
I have ran this type of code several times with never a problem. This seems really simple, but I just can't seem to get it to compute.
Any help would be greatly appreciated.
Regards,
bob sutor
Bob Sutor

Yep--This statement is running in a Stored Procedure and inside its own block statement.
I did get a response that suggested I change the SET statement as follows, that worked:
AllocPercent
= CASE WHEN AllocBase IS NULL OR AllocBase = 0 THEN 0.00 ELSE cast(PM_Input*1.0/AllocBase*1.0
as decimal(6,2)) END
Your response did get me thinking which was great! I appreciate your help.
Regards,
...bob sutor
Bob Sutor

Standar ws ProjectByPartyQueryResponse_In is not returning any values

Hi gurus,
I'm trying to use the standar webservice ProjectByPartyQueryResponse_In in our landscape in order to get all the projects related to the person responsible for the project but the web service is not returning any values.
When I execute the service -using soapui- with the following values (or any other value for that matters):
<PartyID>20000143</PartyID>
<PartyRoleCode>ZA</PartyRoleCode>
The web service always returns :
       <Log>
            <BusinessDocumentProcessingResultCode>5</BusinessDocumentProcessingResultCode>
            <MaximumLogItemSeverityCode>3</MaximumLogItemSeverityCode>
            <Item>
               <TypeID>002(ECC_SE_COMMON)</TypeID>
               <SeverityCode>3</SeverityCode>
               <Note>No records returned for ZA 0020000143</Note>
            </Item>
         </Log>
The party Id exists and also de party role code and there is at least one project that has that party with that role. I'm sure because I use other web service to find a project by id and in the result the project has the <Party> section with those values.
I was looking for solutions, notes, threads in forums with no success, then i decided to debug the webservice and I did find the following line in the webservice code.
SELECT objnr INTO TABLE it_data FROM ihpa
WHERE parvw = role_code AND
         parnr = party_id AND
         obtyp = 'PDN'.
when that line executes the select always returns 0 values, then I look in the table IHPA using the SE16 without any filter and I found that my records exists!! but the select does not get it. I was wondering why the select is not working and then I filter the data in the SE16 using the same values that the query does
for example:
PARVW= ZA
PARNR = 20000143
OBTYP = PDN
And I was surprised when the SE16 did not found any value even I was seeing in the previous screen with no filters!!!! And I supouse thats why the webservice is not working. I started making filters one by one, for example firts filtering just de PARVW = ZA and works, but when I filter just the PARNR = 20000143 the SE16 can't find any value, just when I put an * at the end of the number the SE16 returns all the values expected, Im guessing that the fields in the database has blanks at the end but this is a standar table and a standar program.
Have any of you had the same problem? is there anything that I can do? does anyone knows if this is an unkown bug? becaus I could'n find any note on the marketplace.
Any help would be appreciated.
Gustavo Balboa

Hi!
The problem were solved but not using the Badi, because the badi only let you change the value of the var party_id and that var is declared as PARNR (of type numeric with length 10), and no mater wat you do the two 00 can´t be removed.
We solved the problem with an enhancement point in the code at the method "party_get_data", look at the beginin and at the end. We just change the type of var used for party_id.. now we use a CHAR one insted the numeric used by the original code.
And we repeat the select...
Thank you very much for the help.
METHOD party_get_data.
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""$"$SE:(1) Class CL_PRS_PROJECTPRJPARTYQR, Method PARTY_GET_DATA, Start                                                                                A
$$-Start: (1)----
$$
ENHANCEMENT 1 ZPARTY_GET_DATA.    "active version
DATA : WA_PARNR TYPE I_PARNR.
DATA : WA_CHPAR(10) TYPE C.
ENDENHANCEMENT.
$$-End:   (1)----
$$
DATA : temp_object_number TYPE ihpa-objnr,
          field1 TYPE char50,
          field2 TYPE char50,
          field_role TYPE char50,
          field_party TYPE char50,
          st_object_number TYPE TABLE OF bapiprexp.
DATA : it_data TYPE TABLE OF st_data,
         wa_data LIKE LINE OF it_data,
         itab TYPE TABLE OF st_data,
         wa LIKE LINE OF itab,
         wa_project_details LIKE LINE OF project_details,
         null.
Select Object number based on input Party and Role
SELECT objnr INTO TABLE it_data FROM ihpa
WHERE parvw = role_code AND
         parnr = party_id AND
         obtyp = 'PDN'.
Select Project ID based on input Object number
LOOP AT it_data INTO wa_data.
    SELECT pspid post1 FROM proj INTO CORRESPONDING FIELDS OF wa_data
    WHERE objnr = wa_data-pspid.                         "#EC CI_NOFIELD
    ENDSELECT.
    MOVE-CORRESPONDING wa_data TO wa.
    APPEND wa TO itab.
ENDLOOP.
IF sy-subrc <> 0.
    field_role = cl_wd_utilities=>get_otr_text_by_alias( 'PLM-SE_PRS_XI_PROXY/ROLE_CODE' ) .
    field_party = cl_wd_utilities=>get_otr_text_by_alias( 'PLM-SE_PRS_XI_PROXY/PARTY_ID' ) .
    CONCATENATE field_role role_code_external INTO field1.
    CONCATENATE field_party party_id INTO field2.
    MESSAGE e002(ecc_se_common) WITH field1 field2 INTO null.
    CALL FUNCTION 'PS_BAPI_MESSAGE_APPEND'
      TABLES
        return = party_return.
ELSE.
    MESSAGE s082(ops_se_prs) INTO null.
    CALL FUNCTION 'PS_BAPI_MESSAGE_APPEND'
      TABLES
        return = party_return.
ENDIF.
LOOP AT itab INTO wa.
    MOVE-CORRESPONDING wa TO wa_project_details.
    APPEND wa_project_details TO project_details.
ENDLOOP.
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""$"$SE:(2) Class CL_PRS_PROJECTPRJPARTYQR, Method PARTY_GET_DATA, End                                                                                A
$$-Start: (2)----
$$
ENHANCEMENT 2 ZPARTY_GET_DATA.    "active version
WA_CHPAR = party_id.
SHIFT WA_CHPAR BY 2 PLACES.
CLEAR party_return.
REFRESH party_return.
SELECT objnr INTO TABLE it_data FROM ihpa
WHERE parvw = role_code AND
         parnr = WA_CHPAR AND
         obtyp = 'PDN'.
Select Project ID based on input Object number
LOOP AT it_data INTO wa_data.
    SELECT pspid post1 FROM proj INTO CORRESPONDING FIELDS OF wa_data
    WHERE objnr = wa_data-pspid.                         "#EC CI_NOFIELD
    ENDSELECT.
    MOVE-CORRESPONDING wa_data TO wa.
    APPEND wa TO itab.
ENDLOOP.
IF sy-subrc <> 0.
    field_role = cl_wd_utilities=>get_otr_text_by_alias( 'PLM-SE_PRS_XI_PROXY/ROLE_CODE' ) .
    field_party = cl_wd_utilities=>get_otr_text_by_alias( 'PLM-SE_PRS_XI_PROXY/PARTY_ID' ) .
    CONCATENATE field_role role_code_external INTO field1.
    CONCATENATE field_party party_id INTO field2.
    MESSAGE e002(ecc_se_common) WITH field1 field2 INTO null.
    CALL FUNCTION 'PS_BAPI_MESSAGE_APPEND'
      TABLES
        return = party_return.
ELSE.
    MESSAGE s082(ops_se_prs) INTO null.
    CALL FUNCTION 'PS_BAPI_MESSAGE_APPEND'
      TABLES
        return = party_return.
ENDIF.
LOOP AT itab INTO wa.
    MOVE-CORRESPONDING wa TO wa_project_details.
    APPEND wa_project_details TO project_details.
ENDLOOP.
ENDENHANCEMENT.
$$-End:   (2)----
$$
ENDMETHOD.

XMLTABLE function not returning any values if xml has attribute "xmlns"

Hi,
XMLTABLE function not returning any values if xml has attribute "xmlns". Is there way to get the values if xml has attribute as "xmlns".
create table xmltest (id number(2), xml xmltype);
insert into xmltest values(1,
'<?xml version="1.0"?>
<emps>
<emp empno="1" deptno="10" ename="John" salary="21000"/>
<emp empno="2" deptno="10" ename="Jack" salary="310000"/>
<emp empno="3" deptno="20" ename="Jill" salary="100001"/>
</emps>');
insert into xmltest values(2,
'<?xml version="1.0"?>
<emps xmlns="http://emp.com">
<emp empno="1" deptno="10" ename="John" salary="21000"/>
<emp empno="2" deptno="10" ename="Jack" salary="310000"/>
<emp empno="3" deptno="20" ename="Jill" salary="100001"/>
</emps>');
commit;
SELECT a.*
FROM xmltest,
XMLTABLE (
'for $i in /emps/emp
return $i'
PASSING xml
COLUMNS empno NUMBER (2) PATH '@empno',
deptno NUMBER (3) PATH '@deptno',
ename VARCHAR2 (10) PATH '@ename',
salary NUMBER (10) PATH '@salary') a
WHERE id = 1;
The above query returning results but below query is not returning any results because of xmlns attribute.
SELECT a.*
FROM xmltest,
XMLTABLE (
'for $i in /emps/emp
return $i'
PASSING xml
COLUMNS empno NUMBER (2) PATH '@empno',
deptno NUMBER (3) PATH '@deptno',
ename VARCHAR2 (10) PATH '@ename',
salary NUMBER (10) PATH '@salary') a
WHERE id = 1;
how to get rid out of this problem.
Thanks,
-Mani

Added below one in xmltable, its working now.
XmlNamespaces(DEFAULT 'http://emp.com')

Designer 10gR2 :API: JR_CHECK_REF.CHECK_FOL_REFS does not return proper res

Summary: API: JR_CHECK_REF.CHECK_FOL_REFS does not return proper results
Description:
For User Extensions, the API is returning unexpected/unexplained results for Association types identified as not in the repository.
Scenario 1) EL_TYPE and REF_TYPE return properties that are not aligned with either the EL_IRID/EL_IVID, EL_PAR_IVID, or REF_PAR_IRID.
However, REF_IRID (pointing to the missing object) is correct.
Scenario 2) EL_TYPE and REF_TYPE return properties that are not aligned with either the EL_IRID/EL_IVID, EL_PAR_IVID, or REF_PAR_IRID.
However, all the objects are present in the repository.
Any idea?
~Shampa M.

You might get a better response if you ask this in the Designer Forun.

Function does not return a value

CREATE OR REPLACE PACKAGE BODY Promo_Version_Logo_Pkg IS
FUNCTION Promo_Version_Logo_Rule(Rc IN test.Ot_Rule_Context)
    RETURN Ot_Rule_Activation_Result
   IS
    PRAGMA AUTONOMOUS_TRANSACTION;
    v_Result NUMBER;
    CURSOR Cur_Promo_Logos IS
      SELECT Pvlo.Promo_Id,
             Evt.On_Date,
             Evt.Channel_Id,
             Evt.Start_Time,
             Evt.Duration,
             Pvlo.Logo_Id
        FROM Event                  Evt,
             Event_Technical_Data   Etd,
             Promo_Version_Logo_Opt Pvlo,
             Promo_Timing           Pt
       WHERE Evt.Event_Technical_Data_Id = Etd.Event_Technical_Data_Id
             AND Etd.Promo_Timing_Id = Pt.Promo_Timing_Id
             AND Pt.Promo_Timing_Id = Pvlo.Promo_Timing_Id
             AND Evt.Channel_Id = Rc.Channelid
             AND Evt.On_Date >= Rc.Fromdate
             AND Evt.On_Date <= Rc.Todate
             AND Evt.Day_Type_Id = Rc.Daytype;
BEGIN
    FOR Each_Record IN Cur_Promo_Logos LOOP
      v_Result := Testing_Pkg.Insert_Event(v_Channel_Id   => Each_Record.Channel_Id,
                                                       v_Tx_Time      => Each_Record.Start_Time,
                                                       v_Tx_Date      => Each_Record.On_Date,
                                                       v_Content_Id   => Each_Record.Logo_Id,
                                                       v_Duration     => Each_Record.Duration,
                                                       v_Event_Type   => Uktv_Tools_Pkg.c_Logo_Kind_Code,
                                                       v_Container_Id => Each_Record.Promo_Id);
      IF v_Result = -1
      THEN
        EXIT;
      END IF;
    END LOOP;
END Promo_Version_Logo_Rule;
END Promo_Version_Logo_Pkg;why do I get this "Hint: Function 'Promo_Version_Logo_Rule' does not return a value" after I compile it? The Testing_Pkg.Insert_Event should insert some values somewhere...I just want to try to test it before I move on onto the next bit of it, but I do not understand what I am doing wrong...
Thanks

You need something like:
    END LOOP;
    RETURN v_Result; -- if this is what you are trying to get the function to do
    EXCEPTION
      WHEN OTHERS THEN
      <exception handling/logging - whatever you want>
      RAISE; --this with then raise an error back to the calling process
END Promo_Version_Logo_Rule;This way the function either returns a value, or an exception which can be handled in the calling procedure

Why is the giving me this error (method does not return a value) PLEASE !!

I have this code and it is giving me this error and I don't know how to fix it
can anyone out there tell me why
I have included the next line of code as I have had problems in the curly brackets in the past.
The error is
"Client.java": Error #: 466 : method does not return a value at line 941, column 3
Please help
THX TO ALL
private Date DOBFormat()
    try
      if
        (MonthjComboBox.getSelectedItem().equals("") ||
         DayjComboBox.getSelectedItem().equals("") ||
         YearjComboBox.getSelectedItem().equals("")){
      else
        String dateString = StringFromDateFields();
        SimpleDateFormat df = new SimpleDateFormat("dd/mm/yyyy");
        Date d = df.parse(StringFromDateFields());
        System.out.println("date="+d);
        return d;
    catch (ParseException pe)
      String d= System.getProperty("line.separator");
      JOptionPane.showMessageDialog( this,
       "Date format needs to be DD/MM/YYYY,"+ d +
       "You have enterd: "+ StringFromDateFields()   + d +
       "Please change the Date", "Date Format Error",
       JOptionPane.WARNING_MESSAGE);
      return null;
//File | Exit action performed
public void jMenuFileExit_actionPerformed(ActionEvent e) {
System.exit(0);
}

Fixed it needed to have a return null;
this is the code
if
        (MonthjComboBox.getSelectedItem().equals("") ||
         DayjComboBox.getSelectedItem().equals("") ||
         YearjComboBox.getSelectedItem().equals("")){
        return null;

BI analysis authorization- checking for not equal to values

hello,
the info provider (ZIC_COPA) is having auth. relevant char. are 0COMP_CODE, PLANT, 0SALESORG.
When i am executing query which is built on ZIC_COPA info provider. It is checking all above charcteristics value. But in RSECADMIN i found that system is checking for not equal to values. For ex. please see below RSECADMIN trace. It is checking not equal to values for PLANT. does anybody know why it is checking NOT PLANT IN values??
0COMP_CODE
0PLANT
0SALESORG
SQL Format:
COMP_CODE IN ('1000',,'3200')
AND NOT PLANT IN ('1000','3200')
AND SALES
ORG IN ('1000',','3200',')
AND TCAACTVT = '03'
Note: There is no hardocoding or exclusion values in the query.
Regards
Imran
Edited by: Imran Mulani on Jun 21, 2009 1:13 PM

ok

Javascripts – check boxes not returning proper values

Similar Messages

Maybe you are looking for