JavaSE6 update 24 doesn't respond when clicking on link, using FF4.

When clicking on a link in a web page that calls java, nothing happens. Using Windows 7.

Were you able to fix this issue or find a solution?. I am also trying to open an ICS file from a WebApp installed as a shortcut on the home screen and it doesn't work. It works well when I try to open it from the site running in the Safari Browser.
Thanks.

Similar Messages

  • OpenSuse Undo/Redo doesn't work when click on web links

    OpenSuse 12.2 Firefox 17 Undo/Redo doesn’t work when click on link . All web pages have some problem. Undo/Redo working for web page "Find" text box. All web pages

    Clear Cookies & Cache
    * https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
    Clear the Network Cache
    * https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
    Troubleshooting extensions and themes
    * https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
    Check and tell if its working.

  • I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp does not respond when clicked, and will not quit. help?

    I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
    I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
    help?

    command-option-esc keys and force quit Mail. Then relaunch.

  • Preview doesn't respond to clicks

    MacBook Pro Preview doesn't respond to clicks. This is a newish problem - only came across it today. It probably was ok in July when last I looked.  I cannot even exit Preview without FORCE QUIT. This is most annoying because among other problems it makes working with the Bamboo drawing board very difficult.

    You sure, click Preview on your Dock and then look up on your menu bar.
    The problem there is that while Preview is open there is nothing open to preview. What you need to do, is open a file with Preview to have it show up on your desktop.
    Plus you can always quit Preview when it is displayed on the menu bar,
    or from the Dock by Control (right) clicking on the Dock icon.

  • IMovie shows up in Mission Control, but doesn't open when clicked.

    Can't open iMovie. iMovie shows up in Mission Control, but doesn't open when clicked. It just disappears up in the top left corner of the screen. The controls on the top of the screen (like; iMovie, File, Edit, View, Text, Share, etc) are al there, and they seem to work, but the window just won't show up.
    It happened after installing Mountain Lion on my Macbook Pro.
    Any ideas?

    Disable screen saver. Restart.

  • Photoshop doesn't respond on clicking icon.

    Photoshop doesn't respond on clicking icon. I re-installed software. It didn't solve the problem.

    Hi ,
    It might possible that exe of Photoshop elements editor or organizer is still running.
    go to taskManager >> process tab and then find any .exe belongs to PSE  and kill it.
    Then delete all the preference file located here
    Preference file locations | Photoshop Elements and Premiere Elements

  • Adobe XI doesn't open when clicked

    Hello,
    I have a user who has problems opening Adobe XI. I have searched the forums for answers and tried a number of things. I was hoping someone had a clear explanation for this issue or any additional suggestions.
    Problem: Adobe doesn't open when clicked. The AcroRD32.exe shows in the task manager but the GUI never comes up. When reinstall the software the user is fine for about a month and then the issue comes back.
    Solutions attempted:
    Repair the installation
    Reinstalled the software
    Adjusted registry settings
    Solutions to try:
    Delete the user profile
    Change the Enable Protect Mode at startup settings
    End all task related to Adobe and try to open
    Thanks,

    Also here is a copy of the Windows log errors that keep coming up with the program doesn't open:
    [11/12/2014 1:14 PM]
    Log Name:      Application
    Log Name:      Application
    Source:        Application Error
    Date: 11/12/2014 10:59:54 AM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      3XT41M1.rocgroup.com
    Description:
    Faulting application name: Acrobat.exe, version: 11.0.9.29, time stamp: 0x5412b52e
    Faulting module name: Acrobat.dll, version: 11.0.9.29, time stamp: 0x5412b501
    Exception code: 0xc0000005
    Fault offset: 0x00cef2ee
    Faulting process id: 0x15e4
    Faulting application start time: 0x01cffeaad7378bd7
    Faulting application path: <C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe>
    Faulting module path: <C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Acrobat.dll>
    Report Id: 1608dff9-6a9e-11e4-8f30-0026b9cf21cb
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <Level>2</Level>
        <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-11-12T18:59:54.000000000Z" />
    <EventRecordID>100608</EventRecordID>
        <Channel>Application</Channel>
    <Computer>3XT41M1.rocgroup.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Acrobat.exe</Data>
        <Data>11.0.9.29</Data>
        <Data>5412b52e</Data>
        <Data>Acrobat.dll</Data>
        <Data>11.0.9.29</Data>
        <Data>5412b501</Data>
        <Data>c0000005</Data>
        <Data>00cef2ee</Data>
        <Data>15e4</Data>
        <Data>01cffeaad7378bd7</Data>
        <Data>C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe</Data>
        <Data>C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Acrobat.dll</Data>
    <Data>1608dff9-6a9e-11e4-8f30-0026b9cf21cb</Data>
      </EventData>
    </Event>

  • Premiere doesn't respond when rendering.

    My adobe premiere pro 5.5 doesn't respond when I'm rendering a video. It works fine, until it reaches around 86% when the tab comes up that it has stopped working, and windows is looking for a solution.
    THis is very frustrating, especially after the video has been rendering after 2 hours.

    Welcome to the forum, LotusS.
    Please elaborate on what you mean by "render." Some people use "render" as synonymous with "export" or "encode," but in Premiere we distinguish between rendering and exporting/encode. Rendering is reserved for creating preview files for smoother playback within PPRO, whereas exporting/encoding covers writing a sequence out to an output clip.
    If you're talking about rendering preview files, then the first question is whether that's even necessary. In Premiere Pro, you need to render only if playback is not smooth and fluid; if you're satisified with playback without rendering, then don't bother.
    If rendering preview files is desirable, then  to isolate the cause of the hang, I'd render the sequence in segments by setting in & out points. Since the process is hanging at 86%, you could start by rendering the first three-quarters. Assuming that succeeds, then do smaller segments of the last 25% until you find the spot where it hangs. Then examine that section for an asset or effect or transition that's causing problems.

  • My ipod touch 4th gen froze! blank white screen and doesn't respond when turned off, or connected to my laptop

    my ipod touch 4th gen froze! only blank white screen and doesn't respond when turned off or connected to my laptop!

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • My ipod is on but it doesn't responds  when I touch it.what do I do!?, my ipod is on but it doesn't responds  when I touch it.what do I do!?

    my ipod is on but it doesn't responds  when I touch it.what do I do!?

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • I use Microsoft Office Professional Plus 2010, when clicking a link in Outlook I always get a General Failure box stating 'The system cannot find the file specified' yet it still goes to the specified page. Any ideas on how to resolve this

    I use Microsoft Office Professional Plus 2010, when clicking a link in Outlook I always get a box stating
    General Failure. The URL was "http:// etc etc".The system cannot find the file specified.
    Yet it still goes to the specified page. Any ideas on how to resolve this

    I am having the exact same problem with Windows 7 Professional. Out of the blue, this issue just started a few months ago when running my monthly Windows Backup where I have used a USB drive for the last 3 years, and never ever had this issue before. Most
    of the solutions listed on the Microsoft websites and answers deal with
    "Restore" functions, not the
    "Backup" itself. I have 3 folders being skipped during the backup.
    So I went and changed the Backup from "let Microsoft choose files, directories, etc" to "Let me choose". I included the files and folders that were being skipped, and ran the "Backup" again, and got the same error message,
    but the files that were skipped the first time were "Backed up" finally. This issue is somehow related to my "Libraries"?
    The 3 backup problems are:
    Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book Recordings. Error:(The system cannot find the path specified. (0x80070003))
    Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book CD Label-Cover Art. Error:(The system cannot find the path specified. (0x80070003))
    Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book MP3 Tag Art. Error:(The system cannot find the path specified. (0x80070003))
    Did a "checkdisk" - no problems. Ran a program to fix registry - no problems. All updates up to date. I guess I could eliminate these folders from the Backup folders in the
    Library, and just choose them under the "Users" locations, and be done with it. But I really want to understand this, and fix it. This is within Windows 7 and may be related to Windows Media Player or
    some recent Windows update.  Thanks.

  • When clicking on link in Outlook save as pop up box appears before Firefox opens

    When clicking on link in Outlook save as pop up window pops up before Firefox opens. If browser if open it doesn't happen, if closed it does.

    I have same problem and found article below that worked but then i ended up having to do system restore because outlook stopped sending emails after i synced new iPhone while at Apple store that caused problem!!!
    http://answers.yahoo.com/question/index?qid=20080512192747AAHDZtL

  • Since the most recent Firefox update I have been unable to click through links from Windows Live to Firefox, but it works for Internet explorer?? Any explanations?

    Firefox is my default browser and since the most recent Firefox update I have been unable to click through links I receive from Windows Live Email to the Firefox browser, but it works if my browser is set to IE9?? I have checked the defaults settings and both are fine, so Any explanations or ideas on how to solve this?

    Take each of the following steps that you haven't already tried, until the problem is resolved.
    Step 1
    Restart the router. Many problems are solved that way.
    Step 2
    Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
    Step 3
    Run the Network Diagnostics assistant.
    Step 4
    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
    Step 5
    You may need to change other settings on the router. See the guidelines linked below:
    Recommended settings for Wi-Fi routers and access points
    Potential sources of interference
    Step 6
    Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    Step 7
    Reset the System Management Controller (SMC).

  • When clicking a link I would like it to always open in a new tab.

    When clicking a link I would like it to always open in a new tab.

    In windows right click and you will get an option to open in a new Tab

  • Major bug in Safari 6: previous domain persists in URL bar when clicking a link

    I've noticed an extremely weird and significant bug in Safari 6 / Mountain Lion:
    When I'm navigating through a site, sometimes when clicking a link, Safari tries to open the corresponding URL on a previously visited site's domain instead of the current site.
    For example:
    First, I'm surfing on apple.com. Then, I navigate to another site, say estibot.com. On estibot.com, I click on a link that should take me to:
    http://www.estibot.com/tools.html
    Instead, safari takes me to http://www.apple.com/tools.html, which of course produces a 'not found' error. Nothing wrong with the link; this is purely Safari's doing.
    This happens often, and apparently can happen with any site.
    In other words, the domain name of a previously visited site persists in the URL, and the page that I'm trying to navigate to is added to the domain of the PREVIOUS site, not the actual site I'm using.
    This is a major bug and is often rendering Safari useless for my workflow. How could a bug like this end up in the finished product?
    Cheers
    Esa

    Having the same problem. It is randomly consistent, i.e. some links consistently get redirected to a specific domain. For example, I am experiencing this issue when using Basecamp and links being misdirected to a specific client's website. However, the criteria for why some links redirect and some do not appears random. This issue does not occur in Firefox. This leads me to believe that it is not a DNS issue. May be a Safari/DNS pair issue or solely a Safari issue. We do use an internal DNS (OS X Server) for browsing internal development wbsites which then rolls over to a public DNS. Again, this problem has never occured in Firefox and consistently occurs in Safari.
    Safari Version 6.0 (7536.25)
    Mac OS X Lion 10.7.4
    On a side note...
    Safari's strong-handed rewriting in the address bar as you type is crazy anoying. Or should I say "too helpful?" It seems to break the first rule of usuability: don't change the interface while the user is interacting with it.
    And the unified address/search is rediculously annoying for developers who use non-complient top level domains for internal development (such as .dev)
    And the new inspector seems like a huge step backwards in usuability. (debatable considering I'm probably not as advanced as some developers.)

Maybe you are looking for