Javlin and WL Process Integrator
Does anyone have any ideas how Javlin can be used with the WebLogic
Process Integrator?
Dave
David Mrozek wrote:
>
Hi,
I'm evaluating WL Process Integrator and Collaborate products.
I need some quick answers to the following:
1. Does WL Process Integrator require its own dedicated WL process?Not necessarily. There is nothing stopping you from running WLPI
along with any other app. WLPI is "merely" a collection of EJBs,
and will quite happily co-exist with other apps.
2. Can WL Process Integrator servers be clustered?Not in the current release. WLPI1.2 makes heavy use of JMS, which
is not clusterable in WLS5.1.
3. Does Collaborate requires its own dedicated WL process?Again, not necessarily.
4. Can Collaborate servers be clustered?Not in the current release.
regards,
Per Jessen
(Senior Systems Engineer, BEA Switzerland)
Similar Messages
-
Difference between Integration Process and Monitoring Process
Hi Experts,
What is the difference between Integration Process and Monitoring Process available in PI7.1?
SAP says that Monitoring process is a special kind of integration process that receives the event messages.
My doubt is even integration process can receive the event messages.
Why these two different type of entities are created for the same purpose?
And what is the technical difference between the two in terms of PI perspective?
Regards,
Sami.My question is now answered.
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70a25d3a-e4fa-2a10-43b5-b4169ba3eb17]
On page 17 of this pdf following sentence is mentioned :-
From technical perspective, there is no difference between monitoring process and integration process.
Though logically those are two deifferent things.
Monitoring porcesses are used to receive only event messages that is comprises of event data only.
Like Purchase order creation is a event and its event message will have the event data like Order Id, Created on, Created by, Quantity etc., instead of whole purchase order.
Where as Integration Process is a way to provide solution in some specific circummtances like where we have to automate our process or where we need something in between for the course of communication.
Guys thanks for your precious time.
Regards,
Sami. -
Hi SAP Gurus,
I have installed an SAP PO system and am running the Config Wizard from NWA. The functional unit I have selected from NWA is - "Process Integration and Orchestration Package". This functional unit has in turn selected few more functional units like AEX, SLD. The issue that I am facing is that the wizard does not appear for my inputs and it shows that the selected wizards are running. Please see attachment "config_wizard_running.jpeg"
I read some forums and found a thread where in it was mentioned how to stop the config wizard and restart it. http://scn.sap.com/thread/1422958
Even after restarting my server, the functional units are still showing as running in NWA --> Configuration --> Scenarios --> Configuration Wizard --> Functional Unit Configuration UI. Please see attachment "Config_wizard_stuck.jpeg"
I restarted the application as suggested in the post so that I could run Config Wizard again. But its now allowing me to start it as the status is Running.
Please suggest.
Regards,
AmitHi Dimitri,
Thanks a lot. I have resetted the functional units. This time the wizard comes up ok.
Regards,
Amit -
Business Process & Integration between FI and CML
Hi,
Could you please brief about Business Process & Integration between FI and CML.
Thanks in advance
PrabhakarAny Inputs please for CML
-
Solman HP- ALM Integration and Business Process Configuration
Hello Solman Experts,
Can anyone provide me the links/docs/materials/SAP application Help/Wiki etc for Solution Manager to
HP-ALM Integration and Business Process Mapping/Configuration.
Thank you in advance and waiting for the answers.
Regards,
EswaranHi
check below blog for this
End to End testing with HP ALM 11 and SAP Solution Manager 7.1
thanks
Prakhar -
Hi
I am trying to use Process Integrator with two realms, LDAP for my project
and the RDBMS one for Cloudscape. My problem is that if I define the realm
as
weblogic.security.realmClass=weblogic.security.ldaprealm.LDAPRealm
even if I add all the groups and the acls in the ldap (originally in
Cloudscape), the system does not allow me to authenticate, i.e. if I try to
use The PI Studio, it fails the authorisation as admin.
I have tried various combinations of the realms and the acls, but nothing
works. Does anyone have any idea how to make the ldap realm work with the
authorisation?
Thanx,
Kostas.Not yet. But, they will later on this spring.
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"Michael Madrid" <[email protected]> wrote in message
news:[email protected]..
Do PI and Collaborate run on WLS 6.0? If not, when are there plans forthem
to? -
Difference between Process integration scenario and configuration scenario.
Hi,
Please tell me what is difference between Process integration scenarion and configuration scenarion in SAP PI.
Is Process integration scenario is BPM concept? also what is the advantages over configuration scenario.
Regards,
ManigandanHi Manigandan,
Speaking widely:
Process integration scenario: there is a ccBPM, like the workflow in ABAP, even when you one inside the PI it's generated a workflow in the ABAP stuck
Configuration scenario: it is object to link the integration directory and the esr/IR when you define the logic of your implementation. It isnt mandatory, but you can organize better you develoments if you make an scenario for a "real scenario" like a file to soap integration, you can define it like a configuration scenario.
Regards. -
Assigning a node value from an XML variable to a String type in Weblogic Process Integrator
Hi,
Is there any way to assign a node value from an XML variable to a String variable
in Weblogic Process Integrator...
Thanx.
Narendra.Nerendra
Are you talking about using Xpath on the XML document and assigning to a
variable, it is unclear what you are asking
Tony
"Narendra" <[email protected]> wrote in message
news:3bba1215$[email protected]..
>
Hi,
Is there any way to assign a node value from an XML variable to a Stringvariable
in Weblogic Process Integrator...
Thanx.
Narendra. -
Whats the difference between PROCESS INTEGRATION & INTEGARTION PROCESS
hey All
I was just going through one of the tutorials provided in
http://www.help.sap.com , its related to Process Integartion Scenario and i also came across one more tutorial related to Integration Process.
For * Process Integration* it was there like *A Process Integration scenario is a design object of the Enterprise Services Builder, is uniquely identified by a name and a namespace, and is subject to versioning.*
url : http://help.sap.com/saphelp_nwpi71/helpdata/en/ec/21ee117a909f44a8b69794b9ed6221/content.htm
for Integration Process it was +*An integration process is an executable cross-system process for processing messages. In an integration process you define all the process steps to be executed and the parameters relevant for controlling the process.
You apply integration processes when you want to define, control, and monitor complex business processes that extend across enterprise and application boundaries. The design and processing of integration processes is also known as cross-component Business Process Management (cross-component BPM, ccBPM), or service orchestration.
+*
url :
http://help.sap.com/saphelp_nwpi71/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
So my question is , whether both are same or different , as far my view it different , i think integration processes is one of term inside Process integration as told in URL , please guys see to thisHi Abhishek,
Integration process (IP) refers to BPM. you will find the IP in the ccBPM, Business Process Management.
An integration process is an executable, cross-system process for processing messages.
Process Integration(PI), Now Xi is known as Process Integration PI is a term that is used to in the Integration Broker of the NetWeaver Architecture.
View the below link you will get the related more information.
http://help.sap.com/saphelp_nw04/helpdata/en/2e/bf37423cf7ab04e10000000a1550b0/frameset.htm
hope you got your solution.
Regards
Anil
Edited by: Venkat Anil Gannavarapu on Apr 9, 2008 1:13 PM -
Debit and credit note - integration between mm & sd with fi
Hi,
How does the information flow from MM & SD to FI in the process of raising a DEBIT and CREDIT NOTES' respectively?
(I'm aware of the fact that we need to define the document types "KG" and "DG" and raise the aforementioned by using F-41 & F-27).
However, my doubts are:
1. At what point do we need an FI-MM and FI-SD integration in raising the debit and credit notes'.
2. What is the role of an MM and SD end user along with FI end user in raising the DEBIT AND CREDIT notes, i.e., how do we deal with the inventory in MM in the process of PURCHASE RETURNS and the goods and value of goods sold as far as SALES RETURNS IS concerned, i.e., once purchase returns and sales returns are booked in the relevant deparments, at what point does an accounts executive or FI end user come into picture to raise the aforementioned.
Regards
SandhyaHi,
How does the information flow from MM & SD to FI in the process of raising a DEBIT and CREDIT NOTES' respectively?
(I'm aware of the fact that we need to define the document types "KG" and "DG" and raise the aforementioned by using F-41 & F-27).
However, my doubts are:
1. At what point do we need an FI-MM and FI-SD integration in raising the debit and credit notes'.
2. What is the role of an MM and SD end user along with FI end user in raising the DEBIT AND CREDIT notes, i.e., how do we deal with the inventory in MM in the process of PURCHASE RETURNS and the goods and value of goods sold as far as SALES RETURNS IS concerned, i.e., once purchase returns and sales returns are booked in the relevant deparments, at what point does an accounts executive or FI end user come into picture to raise the aforementioned.
Regards
Sandhya -
ALE/IDOC and RFC/BAPI Integration Scenarios with SAP DS for ESA v3
Hi,
we are planning two PoCs of Integration Plattforms. One of our major requirement set is SAP Integration into our existing SOA.
Because we also have R/3 4.7 Systems in production, we are planning to test ALE/IDOC and RFC/BAPI Integration scenarios with these Integration Plattforms.
My question is:
We are looking for are smart solution to get a SAP Test Environment, where we can test ALE/IDOC und RFC/BAPI Integration scenarios.
It is possible to do this with SAP DS for ESA v3 or shall we better use IDES for that purpose?
Best regards,
StevenHi Abhishek,
This is our scenario. We are doing an integration of SAP HR r/3 system with the CRM system. We need housing information details of the employees which we have in custom infotype 9310 in SAP HR system and we need those details in the CRM system. So am planning out for an ALE/IDOC approach for the integration and gonna maintain the 9310 details in a custom table. In the CRM system, we gonna build a BOL layer for accessing the 9310 details. Also i'm preparing a HLD for this process. I wanna read and go through few same HLD's before i submit my proposal to my client. Please suggest me and help me out.
Thanks in advance.
Regards,
Arunmozhi. -
How to create Process Integration in SLD
Hello colleagues,
I need create Process Integration in SLD my version is PI 7.4.
In development system I have create this process
How to create in production?
Thanks.Hi Victor,
you can create the SLD objects in DEV and transport the same in to Quality and PROD systems.
check the below blog.
http://scn.sap.com/people/daniel.graversen/blog/2012/03/11/sld-setup-and-transport-for-sap-pi
http://help.sap.com/saphelp_nw70/helpdata/en/f1/92b248db68409487661ff13239127d/frameset.htm
You can check this blog for the general SLD setup recommendation of SAP:
http://scn.sap.com/people/boris.zarske/blog/2008/03/21/sld-general-recommendation-how-to-set-up-the-system-landscape-directory
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Regards
Srinivas -
Webinar:SAP NetWeaver Process Integration u2013 Advanced Adapter Engine in PI 7
+Please Note: This webinar is aimed at consultants, Patners and Customers in APJ Region and is scheduled at 2.00 - 3.00 p.m. Singapore Time (UTC +8)+
Dear valued SAP Experts,
Next SAP Intelligence Platform & NetWeaver RIG Expert Call Session will take place on Tuesday, September 1. The SAP Intelligence Platform & NetWeaver RIG Expert Call Sessions are designed to support consultants, partners and customers during their implementation projects. The sessions cover all different aspects of SAP NetWeaver and are aimed at experts, thus provide knowledge which is not available via standard training courses. The session duration is typically 60min and includes questions and answers.
Tuesday, September 1, 2009:
SAP NetWeaver Process Integration u2013 Advanced Adapter Engine in PI 7.1 EHP1
Time: 2.00 - 3.00 p.m. Singapore Time (UTC +8)
This event will feature Charu Goel with the SAP Intelligence Platform & NetWeaver Regional Implementation Group. Charu provides the following abstract:
With PI 7.1 Enhancement pack 1, we continuously thrive to bring in advancements in AAE. In this APJ expert call, we talk about the much awaited capability of IDOC packaging along with the enhancements in JMS. You will learn about the interaction between the AAE and ABAP stack, new enhancements on the JDBC adapter and overall improvements in the technical adapters available with PI 7.1 EHP1.
For meeting and Dial-in detail please register [here|http://www.surveymonkey.com/s.aspx?sm=qkBfQCM5FM_2f_2b4O0ihVpFRw_3d_3d]
Thanks & Best Regards,
Sarma SishtaHi,
This was one of the good session...
Especially the features such as;
-- TCP/IP connection control with JMS adapters
-- Empty file Handling
-- Set the various Attributes for Mail attachments via dynamic configuration (intially only subject line was possible)
-- Message Prioritization
-- single IDOC Ack for IDOC Packaging
-- IDOC packaging
-- and many more........................
Even the future indicatioon of IDOC J2EE based adapter will provide new direction to the existion IDOC related scenarios..
One thing that was changed in IDOC packaging is to control it via Sender Communication channel...intially we were doing it either via ECC system or with t-code "idxpw"
Its almost in same way...but from J2EE based adapter perceptive IDOC packaging will be available with Java stack...and will no need to depend only ABAp stack for this feature.
Thanks
Swarup -
Bussiness Process, Integration Process, cc-BPM, BPM
Hello Everybody!!! Please help me!
1) In XI, Business Process = Integration Process = cc-BPM = BPM ??? Are these four the same thing?
2) Please tell me if I'm wrong: we have two types of message exchange in XI, stateless (through simple message exchange) and (ii) statefull (with BPM). There is no other type, ok?
thank you
JulioHi Julio,
This is an excerpt from one of the posts:-
BPM- Business Process Management- in XI BPM and ccBPM interchangeably used. for more on BPM- as an SAP standpoint or Business Process level - -/people/thomas.volmering/blog/2005/09/21/welcome-to-the-new-bpm-corner
ccBPM- Cross Component BPM -
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/archive-xi_ppts_internal_etc/sap%20netweaver%20rig%20webinar%20-%20cross-component%20business%20process%20management%20with%20xi%203.0.pdf
http://help.sap.com/saphelp_nw2004s/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm
Hope this helps.
Regards.
Praveen -
Synchronous process integration scenario with PI 7.1
Hi all,
Iu2019m trying to create a process integration scenario which contains two actions. Both actions use the same synchronous interface to a web service which takes some parameters and returns a value. When I check the configurability it displays the errors:
Connection from Action1 to Action2 has no outbound interface
Connection from Action1 to Action2 has no inbound interface
and the warning:
Connection from Action1 to Action2 has no mapping
I first assigned the service interface as outbound interface to Action1 and inbound to Action2. Next I tried to assign the interface in- and outbound to both actions, but this didnu2019t change anything on the message. The same scenario with the interface set to asynchronous seems to be valid (but looses the return value of course).
Can anyone give me a hint what Iu2019m doing wrong? Is there any special consideration for synchronous communication which doesn't apply for asynchronous services?
Regards,
TarikDeleting and recreating the actions and service interfaces exactly the same as they were before solved the problem. Seems as if changes in the interface objects sometimes are not activated correctlyu2026
Maybe you are looking for
-
Report on PO,GR,IR in one tcode
Hi all, is there any tcode which has all the below info, - Purchase Order Doc. No. - Order Unit - Price - GR Qu2019ty/IR No. - IR Qu2019ty/GR No. - Goods Receipt created by - IR posted b
-
How do I move my icloud email address to a different Itunes ID
Good Day I was wondering if it is possible to move an icloud email address linked to a current apple ID to a different apple id ?
-
Indesign CS5 to Flash - limitations?
Hi, I'm new in here. I have recently started working in CS5, mainly to design digital mags, but it seems I have to eventually export it to a FLA. file and open in Flash so I can add some components that Indesign don't have. The problem is that I don'
-
Getting Xml tag values based on procedure in parameter
Hi, I have an XML file like bellow <college> <studenthistory> <sno>100</sno> <sname>jeff</sname> <sdept>comp</sdept> </studenthistory> <studenthistory> <sno>200</sno> <sname>kelly</sname> <sdept>physics</sdept> </studenthistory> </college> i am writi
-
A606 - how to add a language easily?
a606_s034_141203_row v13 2014/11/184.4.2 Bought this very neat mobile in Dubai for my son, but unluckily no German language available in settings.Would like to avoid any deep operations on it because my skills are limited in that. Has anyone here got