JAWS Scripts for Flex Installation

Hi,
I'm trying to update JAWS for my computer to use on a particular website that I have to have this for. However when I go to update my file i get this error,
"Your installation of JAWS seems to be corrupted. Please reinstall JAWS and run this installation again. "
I can't find it in my programs, So i'm not sure where to begin to unintsall this to reinstall. I've already uninstalled and reinstalled Adobe Flash Player which is part of what I need for the website as well.
Any suggestions?
I'm going to keep looking.
-Dkerste

JAWS is not an Adobe product, so I don't know how we can help you with this. But the message you get is pretty clear: reinstall/repair JAWS before running the update.
You also mention Flex, which has its own forum http://forums.adobe.com/community/flex

Similar Messages

Oracle scripts for manual installation

I am planning to install the Oracle 10g Release 2 and upgrade to 10.2.0.4 in silent mode. After that I create a database using a script. Since many utilities are not available by default, I run the following scripts manually. I won't use advanced feature like RAC, ASM, OLAP, Partitioning.
login with sys
$ORACLE_HOME/rdbms/admin/standard.sql
$ORACLE_HOME/rdbms/admin/catalog.sql
$ORACLE_HOME/rdbms/admin/catproc.sql
$ORACLE_HOME/rdbms/admin/catrep.sql
$ORACLE_HOME/rdbms/admin/catexp.sql
$ORACLE_HOME/rdbms/admin/catldr.sql
$ORACLE_HOME/rdbms/admin/catblock.sql
$ORACLE_HOME/rdbms/admin/utllockt.sql
$ORACLE_HOME/rdbms/admin/utlrp.sql
login with system
$ORACLE_HOME/sqlplus/admin/pupbld.sql
Are these scripts enough for general use?
If I run utlxplan.sql in either sys or system account, how can ordinary users access the explain plan table?
Thanks!

These files are enough for getting the basic database running.
If I run utlxplan.sql in either sys or system account, how can ordinary users access the explain plan table?Grant rights on this table to PUBLIC, as it is generally done. Else, you can have a plan_table per schema.

I have an older Macbook with OS/X. Tried to download iTunes 10 a few times now, but when installing I always get the same error message: Run Preinstall Script for Apple Mobile Device Support. What can I do to finalise the installation?

I have an older Macbook with OS/X. Tried to download iTunes 10 a few times now, but when installing I always get the same error message: Run Preinstall Script for Apple Mobile Device Support. What can I do to finalise the installation?

Thanks. Short of the sort of "generic" suggestions of restaring your system, if you haven't, and repairing disk permissions and verifying the disk, I don't have any advice right now. I'll do some research and see if I can come across anything. Meanwhile, someone else may have an idea.
Regards.

XI 2.0 installation script for creating XI Sandbox Demo System

Does any have a Windows2000 XI 2.0 installation script designed to create minimal XI Sandbox? Brief installing instructions.

Hi Dan
There is no Installation Script for XI-2.0. The document you have to check is the XI 2.0 installation guide.
Regards
Prasad
SAP Netwaver RIG-XI
SAP Labs LLC, USA

Installation script for installing tables

I am trying to create a packaged application .(package include app, themes, images , shared components and underlying tables)
something similar to the lines of package application samples available here
http://www.oracle.com/technology/products/database/application_express/packaged_apps/packaged_apps.html
Please let me know if there is a way to create installation scripts for tables+sequences+triggers+data.
Appreciate it

These are MS Windows patches, say for server 2012.
this is a simple batch file am using for monthly patches. But now there are servers in staging area of DC which are required to patch with all missing patches from last 1year or so. We got all the patches in to a folder, and need to run against each server.
================================
SC QUERY state= all | findstr "DISPLAY_NAME | STATE" > C:\Services_Before_Reboot_Dec_14.txt
# will grab service beofore reboot
Windows8.1-KB2992611-x64.msu /quiet /norestart
Windows8.1-KB3008923-x64.msu /quiet /norestart
Windows8.1-KB3011780-x64.msu /quiet /norestart
Windows8.1-KB3013126-x64.msu /quiet /norestart
Pause
===================
Cheers, Ramakrishna Darla.

YAIS - Yet Another Installation Script for Archlinux

I wrote this script today and placed it in AUR. It can show you the way and make it easier to install an archlinux system.

orschiro wrote:
https://aur.archlinux.org/packages/yais/
Can you provide some more information?
Your README is not very extensive:
yais
Yet another installation script (for archlinux)
I updated the README, and added a TODO to the git repo. I also rewrote the PKGBUILD. It will be OK now.

Please help me resolve the Lync server 2013 deployment error: "An error occurred while applying SQL script for the feature BackendStore."

I am getting an error in "Step 2 - Setup or Remove Lync Server Components" of "Install or Update Lync Server System" step.
"An error occured while applying SQL script for the feature BackendStore. For details, see the log file...."
Additionally, all previous steps such as: Prepare Active Directory, Prepare first Standard Edition server, Install Administrative Tools, Create and publish topology are done without any errors. The user that I used to setup the Lync server is member of:
Administrators
CSAdministrator
Domain Admins
Domain Users
Enterprise Admins
Group Policy Creator Owners
RTCComponentUniversalServices
RTCHSUniversalServices
RTCUniversalConfigReplicator
RTCUniversalServerAdmins
Schema Admins
I have tried to re-install all the things and started to setup a new one many times but the same error still occurred. Please see the log below and give me any ideas/solutions to tackle this problem.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
Initializing DbSetupBase
Parsing parameters...
Found Parameter: SqlServer Value lync.lctbu.com\rtc.
Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
Found Parameter: Publisheracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Administrators;LCTBU\RTCUniversalServerAdmins.
Found Parameter: Replicatoracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
Found Parameter: Consumeracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Read-only Administrators;LCTBU\RTCUniversalReadOnlyAdmins.
Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
Found Parameter: Role Value master.
Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 2100.
Sql version is acceptable.
Validating parameters...
DbName rtcxds validated.
SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
DbFileBase rtcxds validated.
DbPath D:\CsData\BackendStore\rtc\DbPath validated.
Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
LogPath D:\CsData\BackendStore\rtc\LogPath validated.
Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
Checking state for database rtcxds.
Checking state for database rtcxds.
State of database rtcxds is detached.
Attaching database rtcxds from Data Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath, Log Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
The operation failed because of missing file '\\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath\rtcxds.mdf'
Attaching database failed because one of the files not found. The database will be created.
State of database rtcxds is DbState_DoesNotExist.
Creating database rtcxds from scratch. Data File Path = D:\CsData\BackendStore\rtc\DbPath, Log File Path= D:\CsData\BackendStore\rtc\LogPath.
Clean installing database rtcxds.
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RtcSharedDatabase'****
Initializing DbSetupBase
Parsing parameters...
Found Parameter: SqlServer Value lync.lctbu.com\rtc.
Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
Found Parameter: Serveracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 2100.
Sql version is acceptable.
Validating parameters...
DbName rtcshared validated.
SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
DbFileBase rtcshared validated.
DbPath D:\CsData\BackendStore\rtc\DbPath validated.
Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
LogPath D:\CsData\BackendStore\rtc\LogPath validated.
Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
Checking state for database rtcshared.
Reading database version for database rtcshared.
Database version for database rtcshared - Schema Version5, Sproc Version 0, Update Version 1.
Thanks and Regards,
Thanh Le

Thanks Lạc
Phạm 2
I Had similar issue i end up uninstalling and reinstallting but same issue, then i change the drive but same issue. It was I/O issue. After adjusting my I/O it fix our issue and installation went on without any issue.
If any one using KVM here is detail article
We just give this option cache=‘writeback
using this article http://www.ducea.com/2011/07/06/howto-improve-io-performance-for-kvm-guests/ and http://itscblog.tamu.edu/improve-disk-io-performance-in-kvm/ this fix my issue thanks

Script for adding a login item for all accounts in the system

Hi,
Thanks for reading this query. I am new to the mac environment. I have developed a java application and created an installer of this application for MAC system.I want to run this application on starting the system. So I have written an apple script for adding this application in login items and this script will run immediately after completing installation process. And the entire process is fine. But the problem is, the application is added to login items of only the user who installed the application. But I want to get available the application in the login list of all accounts created in the system. How can I achieve this? Once more thanks in advance. I am attaching my script below:
+*tell application "System Events"*+
+* make login item at end with properties {path:"/Applications/MyApplication.app", hidden:true}*+
+*end tell*+

Hi,
Try to use tables RSOSFIELDMAP, RSDSSEGFD and RSTRAN
Hope it helps
bhaskar

What are the better load/performance testing tools available for Flex Application with BlazeDS RO?

In my application is designed with Flex3, ActionScript3, BlazeDS Remote Objects.
Just i tried with OPENSTA but i cant do the dynamic parameterization in their generated scripts because the response of the calls is binary values and also we cant get the response using with SCL language.
While testing with OPENSTA with HttpService, i can do the dynamic parameterization and got the response.
can give the information about the below questions
whether we can do dynamic parameterization with OPENSTA for Flex Remote objects?
and what are the better load/performance tools available for Flex Remote Objects?

Your approach is fine, depending on how many and what type of CFCs you are talking about. If they are "singletons" - that is, only one instance of each CFC is needed to be in memory and can be reused/shared from multiple parts of your application - caching them in the application scope is common. Just make sure they are thread safe ("var" or local.* all your method variables).
You might consider taking advantage of a dependency injection framework, such as DI/1 (part of the FW/1 MVC framework), ColdSpring, or WireBox (a module of the ColdBox platform that can be used independently). They have mechanisms for handling and caching singletons. Then you wouldn't have to go to the application scope to get your CFC instances.
-Carl V.

Upgrade script for 2.1.0.9.3?

did anybody try to upgrade a WebDB version
2.1.0.9.3 to Portal 3.0? The upgrade script
for WebDB2.2 to Portal30 fails due to the
version number. I do not know the differences
between WebDB 2.1.x and 2.2. If the changes
have not been too significant, is it possible
to modify the existing upgrade script
(WebDB2.2 -> Portal3.0) and still run it?
Thanks for any help or hint
Joerg

For all of those upgrading to Portal 3.0 from WebDB 2.x, you will first need to upgrade your existing WebDB installation to WebDB 2.2 first before doing the WebDB 2.2 to Portal 3.0.x upgrade. It is a requirement that your WebDB environment be at version 2.2 before upgrading to Portal 3.0.x.
null

Local node not included in the list of host names for grid installation

I'm attempting to install clusterware on Solaris 11 on 2 nodes. I've tried tweaking the /etc/hosts file in a few different ways by including the fully-qualified name and without it for the localhost, but it still gives me this error every time. The runcluvfy.sh script doesn't run on Solaris 11. Does anyone know how to get around this problem?
I've tried this using the silent install and with OUI, but got the same error both ways. This is the format of the node names:
oracle.install.crs.config.clusterNodes=myLocalNode:myLocalNode-vip1,myOtherNode:myOtherNode-vip2
[FATAL] [INS-40907] Local node not included in the list of host names for grid installation.
CAUSE: The local node (the node where you are running the installer) was missing from the list of host names you provided.
ACTION: Include the local node in the list of host names for grid installation.
Edited by: 982828 on Jan 18, 2013 1:18 PM

Hi,
what Oracle Version are you trying to install?
Best to directly start with 11.2.0.3 and look in MOS for certification, hints requirements.
Regards
Sebastian

Does anybody have a WLST script for step-by-step cluster restart?

Does anybody have a WLST script for step-by-step "smart" cluster restart?

Dear SAM,
are you looking for exchange 2013 installation. Please follow below link. I have done the same scenario as yours
1. install first VM - 2012
2. Static IP / loopback as primary DNS
3. install ADDS /DNS (forwarder to ISP)
4. install second VM - Static IP again
5. DNS of second VM to be the IP of first VM
6. this will join the domain
7. installation of exchange will be simple, configuration from this link : http://www.techieshelp.com/exchange-2013-step-by-step-configuration/
MARK AS USEFUL/ANSWER IF IT DID
Thanks
Happiness Always
Jatin

Preinstall script for MacOSXUpdCombo10.5.4 failed

Tried installing 10.5.4 update automatically via Software Update - system hung.
Downloaded combo update to manually install. Encountered error message: The Following install step failed: run preinstall script for MacOSXUpdCombo10.5.4. Contact the software manufacturer for assistance.
Ran repair disk permissions. Same error.
Tried installing under Root. Same error.
Tried installing MacOSXUpdCombo10.5.2. Same error.
Anyone encounter similar issue and knows solution please advise?
Cheers.

This is the little script in the installer that check to see if your machine is "eligible" for the update (many programs have it). Try downloading Pacifist, and drag the package from the update onto it. Have it install from there.
If you experience rough performance, do an Archive and Install, and rerun the combo to 10.5.4.

Disaster Recovery server for SAP and HACMP Cluster script for SAP ECC 6.0

Hi,
I need document for Disaster Recovery server for SAP? I have to configure the DR Server If you have, please share this document if possible.
Have you any cluster script ( HACMP Cluster script for SAP ECC 6.0 ) ?
Thanks & Regards,

Hello, I'm doing a "Plant ECC6 to do a test disatre / Recovery.
During the installation, I would use the same <sidadm> existing as it is in the PRD.
If I tell you to install it during the same <sidadm> it will overwrite what already exists, or do I just enter the password of existing <sidadm>?

Air 3.7 for Flex on mac

It sounds so simple and probably should be, but I just spend 3 hours trying to get the most basic setup running and I'm lost in the mess Adobe created. I followed a couple of tutorials and documents but none seem to be working.
All I want is to generate a Flex for mobile project with the latest Air 3.7 SDK.
I tried steps to replace the airsdk that is now deeply hidden in flashbuilders eclipse folders. That only allowed me to create an actionscript for mobile project with 3.7, but not a Flex project.
I tried to download the Air sdk that supposed to be for flex developers (http://airdownload.adobe.com/air/mac/download/latest/AdobeAIRSDK.tbz2). I overlayed these files into an existing Flex 4.6.0 folder. The result was that Flashbuilder didn't recognize the folder as a Flex SDK anymore.
I tried the latter step on a PC and it work so far that I can compile and debug flex for mobile apps on the ipad (with fast mode). Standard mode and export release build end in an never ending packaging process (1.5 hours now for a hello world app and still at 0%)
Any help would be much appreciated. Thank you

Hi,
The Apache Flex project has a few scripts that will help you on OSX.
This will dowload and check the MD5 hashed of all playerglobal.swcs into a Flex SDK.
http://svn.apache.org/viewvc/flex/sdk/branches/develop/ide/checkAllPlayerGlobals.sh?view=m arkup
This will download and inject any version of the AIR SDK into a Flex SDK.
http://svn.apache.org/viewvc/flex/sdk/branches/develop/ide/addAIRtoSDK.sh?view=markup
The latest versions in the Git develop branch support AIR 3.7 (but harder to provide links to - sorry).
Thanks,
Justin

JAWS Scripts for Flex Installation

Similar Messages

Maybe you are looking for