Jax-RPC Client side: How to use multiple X509 client certs ?

hi, (excuse me for my english)
i'm looking for an answer to this question:
I'm using the JAX-RPC libraries (JWSDP 2.0) for a web services client application in my app server (tomcat 4 under 1.4 Sun JVM) with HTTPS connection. All works fine when i'm using system.Setproperties for keystore and trustore.
Buk now, I want to use different client SSL keys for the same app to consume the web service (one SSL client key for a group of users).
Is it possible ?
i've tried using custom SSLSocketFactory and custom KeyManager but it won't works: when the SSL connection is well established once, i can connect to the app with an invalide client cert ! (it seems SSL connection is in cache and i dont't know how to disable this cache).
I have read some threads on this problem without answers ! (http://forum.java.sun.com/thread.jspa?forumID=331&threadID=333010 and http://forum.java.sun.com/thread.jspa?forumID=331&threadID=600372)
Thanks
Edited by: Buck007 on May 26, 2008 9:14 AM

I have the same problem. If you find the solution please post it here :)
thanks

Similar Messages

Deploying JAX-RPC Client for client-side application

I have a java Swing client side application that I am attempting to integrate web services capabilities into. The web services were already written (new to web services myself), I am just calling them. Using Oracle's JDeveloper I managed to create proxies for the web services and to call them just fine, once I added the JAX-RPC Client library to my project.
My only issue is how to deploy. Again within the development environment all works perfectly. I tried references to all the jar files identified by the Oracle JAX-RPC Client library to know luck. I've referenced other jar files I use for deployment with no issues.
Anyone created standalone applciations before that call web services? How did you deploy the web service related libraries.
I'm using JDeveloper 10.1.3.3.0 with Java 1.5.0_06.
I appreciate any guidance provided.

I found a solution, but it shouldn't have been that difficult. JDeveloper provides a view of what JARs are part of a library. I used that as a starting point of what JARs might be required for my instance. I switched to linking to the individual JARs within their JDeveloper installed locations directly instead of the single library. I then systematically starting removing them one-by-one from my list to determine which were actually being used in my implementation. I did this because there were way too many to deploy. Once that was done I created a separate directory for holding the required JARs files local to my application.
Lastly, I had to take care of any internal references within the JARs that may link to other JAR files. So I opened each JAR and looked at its manifest and copied those files over. Then I repeated the steps of deternmining if they were really necessary and copying over other internal references until I had the complete list.
In the end I ended up with a considerable smaller list of JARs then if I had just assumed all JARs within the library and their references. However, it was much more difficult then it needed to be.

How to use multiple tape drive for single filesystem on single client.

Hello All.
I want to backup single filesystem with multiple tape drive.
Incase of Symantec veritas netbackup "NEW_STREAM" for multi-stream backup.
Backup client has a single backup filesystem like /data1 directory with 4 LTO6 drives.
/data1 directory doesn't have a sub-direcotry, just present a files.
If /data1 directory has a sub-directory like /data1/aaa, /data1/bbb, /data1/ccc , Is it possible to use multiple drives?
Please anybody answer the questions.
Thanks advanced.

See how to use multiple tape drive from single client when I want to backup single filesystem?

How can I change namespace prefix for JAX-RPC client request?

I'm creating a JAX-RPC client to invoke a RPC/encoded web service. The service was generated from a ColdFusion program and for some reason when the SOAP namespace prefix is anything but "soapenv" it returns text/html instead of text/xml. Currently the client is sending requests with the prefix "env" and I'd like to change it to "soapenv".
I created a type of javax.xml.rpc.handler.GenericHandler and attempted to do the follow:
@Override public boolean handleRequest(MessageContext p1) {
     SOAPMessage msg = ((SOAPMessageContext) p1).getMessage();
     try {
          SOAPPart part = msg.getSOAPPart();
          SOAPEnvelope envelope = part.getEnvelope();
          envelope.setPrefix("soapenv");
          msg.saveChanges();
     } catch(SOAPException ex) {
          // TODO
          return false;
     return true;
However I get the following exception:
java.rmi.RemoteException: SOAPFaultException - FaultCode [{http://schemas.xmlsoap.org/soap/envelope/}Server] FaultString [UNIMPLEMENTED ] FaultActor [null] Detail [<detail><bea_fault:stacktrace xmlns:bea_fault="http://www.bea.com/servers/wls70/webservice/fault/1.0.0">java.lang.AssertionError: UNIMPLEMENTED
at weblogic.xml.domimpl.NodeImpl.setPrefix(NodeImpl.java:173)
at test.MyHandler.handleRequest(MyHandler.java:33)
at weblogic.wsee.handler.JaxrpcHandlerChain.handleRequest(JaxrpcHandlerChain.java:58)
at weblogic.wsee.ws.dispatch.server.JaxrpcChainHandler.handleRequest(JaxrpcChainHandler.java:102)
at weblogic.wsee.handler.HandlerIterator.handleRequest(HandlerIterator.java:141)
at weblogic.wsee.handler.HandlerIterator.handleRequest(HandlerIterator.java:107)
at weblogic.wsee.ws.dispatch.client.ClientDispatcher.dispatch(ClientDispatcher.java:132)
at weblogic.wsee.ws.WsStub.invoke(WsStub.java:87)
at weblogic.wsee.jaxrpc.StubImpl._invoke(StubImpl.java:341)
at test.Approvedsuppliers_Wrap_Stub.echo(Approvedsuppliers_Wrap_Stub.java:31)
at test.Approvedsuppliers_WrapPortClient.echo(Approvedsuppliers_WrapPortClient.java:130)
at test.Approvedsuppliers_WrapPortClient.main(Approvedsuppliers_WrapPortClient.java:43)
Is there any workaround? I appreciate any feedback.
Thanks, Bill

What I ended up doing is converting the SOAP message to a string, replacing the namespace prefix and converting it back to a SOAP message.
@Override
   public boolean handleRequest(MessageContext messageContext) {
      SOAPMessageContext soapMessageContext = (SOAPMessageContext) messageContext;
      SOAPMessage soapMessage = soapMessageContext.getMessage();
      String soapString = convertSOAPToString(soapMessage);
      soapString = soapString.replaceAll("env:", "soapenv:");
      soapString = soapString.replaceAll("xmlns:env", "xmlns:soapenv");
      SOAPMessage newSoapMessage = convertStringToSOAP(soapString);
      MimeHeaders mimeHeader = newSoapMessage.getMimeHeaders();
      mimeHeader.setHeader("SOAPAction", "");
      soapMessageContext.setMessage(newSoapMessage);
      return true;
   private String convertSOAPToString(SOAPMessage soapMessage) {
      StringWriter stringWriter = null;
      try {
         stringWriter = new StringWriter();
         StreamResult streamResult = new StreamResult(stringWriter);
         TransformerFactory transformFactory = TransformerFactory.newInstance();
         Transformer transformer = transformFactory.newTransformer();
         transformer.transform(new DOMSource(soapMessage.getSOAPPart()), streamResult);
      } catch (TransformerException e) {
         throw new RuntimeException(e);
      } finally {
         close(stringWriter);
      return stringWriter.toString();
   private SOAPMessage convertStringToSOAP(String soapString) {
      SOAPMessage soapMessage = null;
      ByteArrayInputStream byteInputStream = null;
      try {
         MessageFactory msgFactory = MessageFactory.newInstance();
         soapMessage = msgFactory.createMessage();
         SOAPPart soapPart = soapMessage.getSOAPPart();
         // Load the SOAP text into a stream source
         byte[] buffer = soapString.getBytes();
         byteInputStream = new ByteArrayInputStream(buffer);
         StreamSource source = new StreamSource(byteInputStream);
         // Set contents of message
         soapPart.setContent(source);
      } catch (SOAPException e) {
         throw new RuntimeException(e);
      } finally {
         close(byteInputStream);
      return soapMessage;
   private void close(Closeable closeable) {
      if(closeable != null) {
         try {
            closeable.close();
         } catch (IOException e) {
            // TODO

How to use multiple JREs (1.5.0_20 and 1.6.0_07) with Internet Explorer 8?

Hi!
Question about the problem mentioned in subject.
I have configured that JNLP opens with 1.5 version, both versions are enabled in Java Control Panel Runtime Settings but when I try to start a desktop java console says:
Java Web Start 1.5.0_22
Using JRE version 1.6.0_07 Java HotSpot(TM) Client VM
And the opening of the desktop creates an exception:
Java Web Start - Invalid Argument Error
TooManyArgumentsException[ Too many arguments supplied: {C:\WINDOWS\Temporary, Internet, Files\Content.IE5\....
I'm trying to open my desktop with 1.5 version and other programs with 1.6 version. What is it that I still need to do? I'm kind of confused with this. Some of my collagues have succeeded with this and some doesn't, with the same configuration.
So the question is, how to use multiple JREs with IE8 so that one application uses 1.5 version and others 1.6 version?
Br,
Katri
Edited by: ka**** on 09-Mar-2011 01:16
Edited by: ka**** on 09-Mar-2011 03:16

ka**** wrote:
..Question about the problem mentioned in subject.No "Using multiple JREs (1.5.0_20 and 1.6.0_07) with Internet Explorer 8" is a statement. To transform it to a question would be something like "How to use multiple JREs (1.5.0_20 and 1.6.0_07) with Internet Explorer 8?".
Once you can come up with an actual question, I might look at this more closely.

JAX-RPC client access a JAX-WS services

Hello all,
There is a little problem I had with webservices and googling for a solution has not help so far.
I am accessing a JAX-WS webservice from a J2SE 1.4.2 JAX-RPC client application and getting a NoSuchMethodError error from one of the stubs at runtime. The method call is rather a HelloWorld concept but it has not been possible.
This are the step I took (I am using netbeans 6.0).
1. I downloaded the JAX-RPC plugin on netbeans
2. Download the stubs using the wsdl url. I am using the netbeans wizard for this process.
3. Write my code for get a handle to the endpoint. Using the ServiceFactory.loadClass().
4. Call the method on the
Can anyone please help me.

To make things a little more clearer, this is a post of the error gotten at runtime...
        java.lang.NoSuchMethodError: java.util.Collections.emptyList()Ljava/util/List;
        at com.sun.xml.messaging.saaj.soap.MessageImpl.<clinit>(MessageImpl.java:755)
        at com.sun.xml.messaging.saaj.soap.ver1_1.SOAPMessageFactory1_1Impl.createMessage(SOAPMessageFactory1_1Impl.java:47)
        at com.sun.xml.rpc.soap.message.SOAPMessageContext.createMessage(SOAPMessageContext.java:137)
        at com.sun.xml.rpc.client.StreamingSenderState.<init>(StreamingSenderState.java:30)
        at com.sun.xml.rpc.client.StubBase._start(StubBase.java:92)
        at mck.practise.oracle.plsql.PlsqlService_Stub.sayHello(PlsqlService_Stub.java:54)
        at mck.practise.oracle.plsql.HelloWorld.sayRPCHello(HelloWorld.java:34)
        at mck.practise.oracle.plsql.HelloWorld.main(HelloWorld.java:22)The suprising thing is that if I change the application's java platform from JDK 1.4 to Java 5 using the netbeans projects property window, everything works fine.
Can anyone still suggest on this.
Regards,

JAX-RPC client with JDeveloper 12c

Hello,
It's the first time I use jax-rpc (I'm used to jax-ws) and looking for help.
I need to create a client for a JAX-RPC web service using JDeveloper 12c.
The customer provided to me a WSDL file (I don't have access to the webservice yet). In JDeveloper I created as usual a "Web Service Client and Proxy" providing that wsdl file, but I think the generated code is for a JAX-WS (since there are @WebMethod, @WebServiceClient and @WebService notations that I understood should not be present in JAX-RPC clients.
Can anyone point me to some documentation about JAX-RPC client developing in JDeveloper 12?
Thank you,
Marco

To make things a little more clearer, this is a post of the error gotten at runtime...
        java.lang.NoSuchMethodError: java.util.Collections.emptyList()Ljava/util/List;
        at com.sun.xml.messaging.saaj.soap.MessageImpl.<clinit>(MessageImpl.java:755)
        at com.sun.xml.messaging.saaj.soap.ver1_1.SOAPMessageFactory1_1Impl.createMessage(SOAPMessageFactory1_1Impl.java:47)
        at com.sun.xml.rpc.soap.message.SOAPMessageContext.createMessage(SOAPMessageContext.java:137)
        at com.sun.xml.rpc.client.StreamingSenderState.<init>(StreamingSenderState.java:30)
        at com.sun.xml.rpc.client.StubBase._start(StubBase.java:92)
        at mck.practise.oracle.plsql.PlsqlService_Stub.sayHello(PlsqlService_Stub.java:54)
        at mck.practise.oracle.plsql.HelloWorld.sayRPCHello(HelloWorld.java:34)
        at mck.practise.oracle.plsql.HelloWorld.main(HelloWorld.java:22)The suprising thing is that if I change the application's java platform from JDK 1.4 to Java 5 using the netbeans projects property window, everything works fine.
Can anyone still suggest on this.
Regards,

JAX-RPC Client for VB-SoapToolkit3.0 WebService

I need to develop a JAX-RPC client for a VB6.0 WebService (the WebService being generated through MS SoapToolkit3.0).
I'm using JWSDP 1.0_01. The WSDL that the JWSDP is using to generate the stubs is the one generated by the MS SoapToolkit. My WebService
has only one method (Public Test(xpto As String)As String) that receives and returns a string.
So what's the problem:
- JAX-RPC client sends a SOAP packet different than what the WebService expects, especially in the namespaces. JAX-RPC generates some strange namespaces, like xmlns:ns0="xpto" (xpto is the name of the argument of the WebService) or xmlns:ns1="Result xpto"
- Looking at the JAX-RPC generated WebService interface, I see that instead of String, the method test receives a StringHolder (???). What's a string holder, and why isn't a String?
The resumed message returned by the WebService:
<mserror:description>WSDLReader:None of the matching operations for soapAction http://tempuri.org/Test/action/WS.Test could successfully load the incoming request. Potential typemapper problem HRESULT=0x80070057: The parameter is incorrect.
- Server:One of the parameters supplied is invalid. HRESULT=0x80070057: The parameter is incorrect.
</mserror:description>
Any help would be apreciated.
Thanks

Can you send the WSDL that you used to generate the JAXRPC client?
Thanks

How to use multiple ipods on one account

I have an Ipod classic and just bought my sons two nano's how do I use these on the same account without changing my account info?

Take a look here:
How to use multiple iPods with one computer
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?

Hi All,
Hope to you a very happy new year,
I have two differnt LAP 1300 and 1200 in my network and I need to add theme to the WLC,
I successed to add one of theme by the option 60 in the DHCP pool at the Core SW,
So my quetion is below:
How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?
Thanks in Advanced,
Ahmed,

To add to Scott's post. Option 60 would be useful if you needed to put certain types of AP on specific controllers. Otherwise, no real need to use it for the most part.
Though, I do recall an issue a few years ago that some windows machines had issues getting DHCP if option 43 is being returned.
Now, on an IOS switch, you can only configure one option 60 per DHCP scope
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

How to use multiple table in single control file?

Hi,
How to use multiple table and data file in sigle control file? I have a four table and four csv file i mean data file for that. I am running concurrent program to load the data from csv file to custom table. based on my input data file name, it has to take automatically from one control file.
Can anyone share with me how can i acheive this?
Thanks

Hi,
Can't we acehive like below. I don't this exactly corrcect.
OPTIONS (SKIP=1)
LOAD DATA
INFILE << file name 1 >>
APPEND INTO TABLE XXCZ_VA_SAMPLE1
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
PARENT_ITEM "TRIM(BOTH FROM :PARENT_ITEM)"
LOAD DATA
INFILE << file name 2 >>
APPEND INTO TABLE XXCZ_VA_SAMPLE2
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
ITEM_NUMBER "TRIM(BOTH FROM :ITEM_NUMBER)"
)Edited by: orasuriya on Sep 14, 2009 3:03 AM

How to use multiple selection parameters in the data model

Hi, after have looked all the previous threads about how to use multiple selection parameters , I still have a problem;
I'm using Oracle BI Publisher 10.1.3.3.2 and I'm tried to define more than one multiple selection parameters inside the data template;
Inside a simple SQL queries they work perfectly....but inside the data template I have errors.
My data template is the following (it's very simple...I am just testing how the parameters work):
<dataTemplate name="Test" defaultPackage="bip_departments_2_parameters">
<parameters>
<parameter name="p_dep_2_param" include_in_output="false" datatype="character"/>
<parameter name="p_loc_1_param" include_in_output="false" datatype="character"/>
</parameters>
<dataTrigger name="beforeReport" source="bip_departments_2_parameters.beforeReportTrigger"/>
<dataQuery>
<sqlStatement name="Q2">
<![CDATA[
select deptno, dname,loc
from dept
&p_where_clause
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_DEPT" source="Q2">
<element name="deptno" value="deptno"/>
<element name="dname" value="dname"/>
<element name="loc" value="loc"/>
</group>
</dataStructure>
</dataTemplate>
The 2 parameters are based on these LOV:
1) select distinct dname from dept (p_dep_2_param)
2) select distinct loc from dept (p_loc_1_param)
and both of them have checked the "Multiple selection" and "Can select all" boxes
The package I created, in order to use the lexical refence is:
CREATE OR REPLACE package SCOTT.bip_departments_2_parameters
as
p_dep_2_param varchar2(14);
p_loc_1_param varchar2(20);
p_where_clause varchar2(100);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
CREATE OR REPLACE package body SCOTT.bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
if (p_dep_2_param is not null) --and (p_loc_1_param is not null)
then
p_where_clause := 'where (dname in (' || replace (p_dep_1_param, '''') || ') and loc in (' || replace (p_loc_1_param, '''') || '))';
else
p_where_clause := 'where 1=1';
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
As you see, I tried to have only one p_where_clause (with more than one parameter inside)....but it doesn't work...
Using only the first parameter (based on deptno (which is number), the p_where_clause is: p_where_clause := 'where (deptno in (' || replace (p_dep_2_param, '''') || '))';
it works perfectly....
Now I don't know if the problem is the datatype, but I noticed that with a single parameter (deptno is number), the lexical refence (inside the data template) works.....with a varchar parameter it doesn't work....
So my questions are these:
1) how can I define the p_where_clause (inside the package) with a single varchar parameter (for example, the department location name)
2) how can I define the p_where_clause using more than one parameter (for example, the department location name and the department name) not number.
Thanks in advance for any suggestion
Alex

Alex,
the missing thing in your example is the fact, that if only one value is selected, the parameter has exact this value like BOSTON. If you choose more than one value, the parameter includes the *'*, so that it looks like *'BOSTON','NEW YORK'*. So you need to check in the package, if there's a *,* in the parameter or not. If yes there's more than one value, if not it's only one value or it's null.
So change your package to (you need to expand your variables)
create or replace package bip_departments_2_parameters
as
p_dep_2_param varchar2(1000);
p_loc_1_param varchar2(1000);
p_where_clause varchar2(1000);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
create or replace package body bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
p_where_clause := ' ';
if p_dep_2_param is not null then
if instr(p_dep_2_param,',')>0 then
p_where_clause := 'WHERE DNAME in ('||p_dep_2_param||')';
else
p_where_clause := 'WHERE DNAME = '''||p_dep_2_param||'''';
end if;
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || ' AND LOC IN ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || ' AND LOC = '''||p_loc_1_param||'''';
end if;
end if;
else
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || 'WHERE LOC in ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || 'WHERE LOC = '''||p_loc_1_param||'''';
end if;
end if;
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
I've written a similar example at http://www.oracle.com/global/de/community/bip/tipps/Dynamische_Queries/index.html ... but it's in german.
Regards
Rainer

How to use multiple iPods

I have multiple iPods & iPhones & I'd like to share my library with them all. How do I do this??? How can I share content outside of purchased iTunes?

See this for some tips: How to use multiple iPods, iPads, or iPhones with one computer, http://support.apple.com/kb/HT1495

How To Use Multiple Currencies in single payroll ........

Dear All
Can you help me How To Use Multiple Currencies in single payroll?
with regards
User600722

I am not a functional expert. but ML Note 150173.1 (which is quite old) states that this is not possible.
Srini

How to use multiple statements inside the "THEN" block of CASE statement?

Below is the code:
SET @strTempString = case @strKeyMode
WHEN 'AUTO/CYCLE'
THEN @strRefID + '|' + @strRetID
WHEN 'CYCLE'
THEN @strRefID + '|' + @strRetID
WHEN 'COMMERCIAL'
THEN @strRefID + '|' + @strRetID
WHEN 'ISNAP'
THEN set @strFName = ltrim(rtrim((Left(dbo.CleanTheStringAdv(@strFName + ' ', 2) + ' ', 2))))
'' + @strRefID + '|' + @strLName + '|' + @strFName + '|' + @strZIPorPolType
WHEN 'ASNAP'
THEN @strRefID + '|' + @strRetID
WHEN 'MOAT'
THEN @strRefID + '|' + @strRetID
else '0'
end
The first 3 conditions are understandable. How to use multiple statements in 4th case?
Here I first want to set the value as:
set @strFName = ltrim(rtrim((Left(dbo.CleanTheStringAdv(@strFName + ' ', 2) + ' ', 2))))
and then return the string '' + @strRefID + '|' + @strLName + '|' + @strFName + '|' + @strZIPorPolType to @strTempString.
Please help me remove the syntax errors.
Thanks in advance.

Try below SQL
DECLARE @strKeyMode varchar(20) = 'ISNAP'
DECLARE @SQL VARCHAR(MAX)
DECLARE @strRefID int=1
DECLARE @strRetID INT=2
--FIRST WAY
IF @strKeyMode ='AUTO/CYCLE'
SELECT CAST(@strRefID as varchar(10))
ELSE IF @strKeyMode ='CYCLE'
SELECT @sql = CAST(@strRefID as varchar(10)) + '|' + CAST(@strRetID as varchar(10))
ELSE IF @strKeyMode='ISNAP'
SELECT @sql = CAST(@strRefID as varchar(10)) + '|' + CAST(@strRetID as varchar(10))+'test'+'abc'
ELSE
SELECT @SQL='ABC'
print @sql
----SECOND WAY
SELECT @SQL = CASE @strKeyMode
WHEN 'AUTO/CYCLE' THEN CAST(@strRefID as varchar(10))
WHEN 'CYCLE' THEN CAST(@strRefID as varchar(10)) + '|' + CAST(@strRetID as varchar(10))
WHEN 'ISNAP' THEN CAST(@strRefID as varchar(10)) + '|' + CAST(@strRetID as varchar(10))+'test'+'abc'
ELSE 'No Record'
END
PRINT (@SQL)
--Prashanth

Jax-RPC Client side: How to use multiple X509 client certs ?

Similar Messages

Maybe you are looking for