Jazz-n data not updating properly
Hi All,
Jdev 11.1.1.4.0
I am having problem in adf security in Jdev
I have configured adf security in my application, and i am adding users and some roles for them.
While running the i cant see the deployment log in Jdev that the users are updated to weblogic.(because of that its giving incorrect username and password)
But i can see those logs in some sample application, but its not in my application.
why its not showing deployment log while adding in JDev ? any suggestions please..
thanks,
Gopinath Jayavel
Gopinath J wrote:
why its not showing deployment log while adding in JDev ? any suggestions please..Don't know, but you can verify the security deployment in WebLogic by logging in to the WebLogic Application Console (http://localhost:7001/console) by navigating to Security Realms >myrealm >Users and Groups
Similar Messages
-
GL_JE_HEADER table : Posted date not update properly
Hi All,
I have seen that for few of the journals created inside GL, The posted date inside the GL_JE_HEADER table is update with a date instead of time stamp.
i.e the posted date column is updated as '7/08/2013' instead of '7/08/2013 4:40:39 AM'
This has caused some problem in te system.
was wondering if you could help me to get an answer for this.
regards
Amiti am thinking that you want to include the time when you query the column post_date from table. if you are using SQL*Plus the default display for the date does not include the time. to include the time when you do a select on any data column use the ALTER SESSION SET NLS_DATE_FORMAT command.
e.g.
SQL> select sysdate from dual;
SYSDATE
18-SEP-13
SQL> alter session set nls_date_format = 'dd-mon-yyyy hh:mi:ss am';
Session altered.
SQL> select sysdate from dual;
SYSDATE
18-sep-2013 11:57:17 am
SQL> -
Data Not Updating Properly in CUBE
Hello Experts,
There is one critical issue which i am facing in FI - CO scenario. please provide your inputs.
we have a requirement to generate PNL statement report from FI - CO. means the values for Revenue, COGS must be come from FI and Operating expenses like Sales and Marketing, Research & Development, General Administrative must come from CO.
we took two Data Source 0FI_GL_10 and other is 0CO_OM_CCA_9. the entire data flow for FI is 0FI_GL_10 --> 0FIGL_O10 --> 0FIGL_C10 --> ZFICO_M01 and the entire data flow for CO is 0CO_OM_CCA_9 -->ZCO_C01 --> ZFICO_M01. i have initialized data for both the data source. and for delta i have created process chain on hourly basis because our customer runs the report hourly basis means they post some entries in FI and they wanted to see it in BI after an hour.
Now when we load delta records on hourly basis . all entries are not coming means some are missing. but if we check it after 24 hour then it will be come in cube. but after an hour it is not coming.and in that i case i have to refresh entire BI means delete all the data from BI and then load init again and all.
are there any settings in ECC (R/3) side so that we can have right records in BI ?
Regards,
Komik ShahHi Komik,
When there is a process chain to load the data on hourly basis. It would reflect the data in the cube. If u still found the problem then u have to check the process chain in which the info packages have been added. I don't thinks there is a ABAP program for this.
Regards,
Rahul. -
Planning area data not updated in infocube in APO system
Hi all,
User is uploading a flat file using addon program to an infocube 1, from this infocube data for sales forecast KF is getting transferred to a planning area KF using standard program RTS_INPUT_CUBE. I can see the updated data in Planning book (which refer the same planning area) data views. In planning book the sales forecast data is also getting copyied to second KF 'Arrangement FC' and its correct.
Now there is a infocube 2 (second) which is getting data directly from this planning area (infocube also contains both KFs). But When i checked this infocube 2 , the updated data is availabe in Sales forecast KF , but arrangement forecast KF is having old data only and user is running query on second KF , so he is getting wrong report.
Since there is no data flow for this infocube 2, and it is getting data from planning area, I feel its remote infocube.
I have also found the datasource for this planning area but don't know how to move further to find why data is not updating properly? Please help on this.
I have information that 2 weeks before data was properly updated, but this time data is not updated,
system version is SAP SCM 4.0Hi Vivek
it is advisable to run the background jobs when the planning books are not being accesses by the users to prevent such inconsistencis. Hence i would advise you to run the jobs durng non-working hours. and if you have a global system, then you may restrict to run the jobs based on regional levels.
in addition, it is also a good practice to run consistency jobs before and after your have completed the background jobs. i hope you are using process chains to execute the sequeuce of jobs. if yes, then you can add consistency check jobs in the process chains.
some of the consistency check reports are :
/SAPAPO/OM17 - liveCache Consistency Check
/SAPAPO/TSCONS - Consistency Check for Time Series Network
/SAPAPO/CONSCHK - Model Consistency Check
and so and so forth..
you can find these conssistency jobs under APO Adiminstration --> Consistency checks in APO.
let me know if this helps.
Rgds, Sandeep -
Shockwave will not update properly
Hi. I have a laptop running Windows 7 Home premium, 64 bit system.I use IE and just installed Firefox, as well. I tried to update Shockwave so I could continue to play my UClick jigsaw puzzle game, and my computer says it installed successfully, but it will not work with my jigsaw puzzle. I have uninstalled it and tried to reinstall it, but no change in response. When I try to open jigsaw puzzle, the Adobe Shockwave loading graphic appears, but nothing happens.
Help!I understand the two sites are using different plugins/players. I'm not an idiot. However as Shockwave for Director is so old it's listed by Firefox as an unknown plugin and described as being a Netscape plugin ("Adobe Shockwave for Director Netscape plug-in, version 12.1.5.155"), I am merely suggesting that UClick might change to a more recent, robust plugin.
From: SeanWilson <[email protected]>
To: RB Jones <[email protected]>
Sent: Sunday, March 8, 2015 2:34 PM
Subject: Shockwave will not update properly
Shockwave will not update properly
created by SeanWilson in Adobe Shockwave Player - View the full discussionThose two sites use 2 completely different plugins/players to view their content — one being Shockwave for Director, the other being Flash so "just changing the call" won't work. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7265858#7265858 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7265858#7265858 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Shockwave Player by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
Tried updating my itunes about a month ago, it would not update properly and left me with a notification saying "i tunes was not installed properly, please reinstall itunes" i've uninstalled and reinstalled a few times and still nothing.
i might need walked through on a few things if they are too complicated.Have you:
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If a PC
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8 -
Data not updating in table ,data transfered using DTW
Hi Everybody,
I had transfered data using DTW, it shows that data imported,but it not updated, that means it not shows in database.
So please so me any solution to this.
Regards,
SrinivasHi suda,
I am giving he detailes of the BusinessObject
BusinessObject =oUserLanguages
template=oUserLanguages.csv
i had copied the oUserLanguage.csv file and entered data into it and saved it(comma deliminated)
steps:
1.i had selected oUserlanguage object from list.
2.i had selected source file (oUserLanguage.csv )
3.the data properly matched and data is displayed when source tab is pressed. and ields are properly matched.
4.three check boxes are checked.
5.i had seen the message you are sucessfully specified required information for imporing data
6.in lost step it shows like below
Total: 2 business object(s)
2 business object(s) imported successfully
0 business object(s) not imported
0 business object(s) updated successfully
0 business object(s) not updated
7.in log files status shows succeeded
But I had cheked the languages , the data imported not shown.
Regards
srinivas -
Hi,
I am using AdobeInteractiveForm in Web Dynpro for Java. Method used is updateDataInPDF.
Scenario is like this : When user clicks on one button in Web Dynpro view, some of the fields in PDF document displayed in view should be updated and email should be sent to the user with PDF as attachment.
Problem: Email is getting sent to the user, but fields are not updated in the PDF document sent as attachment.
Page is refreshed only after processing is done (i.e, email is sent) and then all the fields are updated in PDF document displayed on view.
Can I refresh PDF programmatically, so that all the data in context nodes is updated in PDF (binary file) , and email sent to user contains updated fields?
Regards,
ApurvaHi
Check these links for input
1,[ How to update values in Adobe form? |How to update values in Adobe form?;
2.[updating properly|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313333333733353336%7D.do]
Hope it help
Best Regards
Sattish Kumar -
Quantity purchased via PO is not updating the master data of the newly created fixed assets.
When created and inserted into any number, the amount is updated with the purchase.
What do you make the purchase of newly created assets are properly updated in the asset master data?
GLippmannThe SAP Notes instrctions solved the problem.
Thank you mvery much.
Best Regards...
GLippmann -
Data not updating from psa into Data Targets
Hiii,
We have started data upload in info cubes from psa . The number of records was 4 in psa . But after waiting for at least 3 hours ,still the data is not updated in info cube . The data which we want to upload in info cube (of stock) is of past date which due to some reason failed to update in BI from ECC . To upload the same that is data of past date we have deleted the setup table in ECC and then after filling the data again in set up tables, created a new info package from which uploaded data in PSA . But while trying to upload data in info cubes,it is not getting updated and the request status is showing still green yellow in psa.
Please suggest how to resolve this issue.
Thanks and regardsAre you loading material movements from 2LIS_03_BF in to cube? If so, please look at the below link for inventory data loads.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/906b837a-0d54-2c10-08b8-bde70337547e?QuickLink=index&overridelayout=true
Regards,
JB -
Bdoc received but data not updated
Hello,
I am using CRM4.0
I changed the customizing in table CRMC_ACT_DECOM to change values of field KV_DEKO.
Then, I transported the modification usign R3AS4 to CDB.
I can see that the table CDBC_ACT_JOURN is updated correctly with the new values.
My problem is that I don't see the modification on MSA. When I try a select on this table, i just see the old values.
It tried to do an extract on replication object CRM_DNL_ADOCCH for my site, the bdoc is well sent and I can see the new data in it, but even after synchronisation, the data in MSA is not updated...
What am I missing ?
(the strange thing is that I didn't have this issue in dev environnement)
Thanks in advance,
EDIT : ok when I launch this query in query analyser :
SELECT *
FROM dbo.CDBC_ACT_JOURN
WHERE FIELDNAME = 'KV_DEKO'
I get all the data.
But when I am using the query in SQL Server entrerprise management, I don't see them !!
Edited by: Louis-Arnaud Bouquin on Nov 10, 2009 10:26 AM>
sujith golla wrote:
> Status of the IDOC is "53", so successfully posted
> records that have the status can NOT be reprocessed using BD87
There are some tricks: you can either create a copy of the IDoc in WE19 and then process it or use report RC1_IDOC_SET_STATUS (be careful though) to update the IDoc status.
However, you might want to do some more research and use suggestions above before resorting to these measures. -
hi alll
1. i have written below coding for vendor master update. i have two records in text file, in that first record not updated. while updating its shows error. but second record updated. how can i solve. plse help me
2. I want to show the error message or i want to print how can i do it
REPORT ZVENTESTBDC.
data : begin of it_xk01 occurs 0,
LIFNR(10) type c,
BUKRS(4) type c,
EKORG(4) type c,
KTOKK(4) type c,
NAME1(30) type c,
SORT1(10) type c,
LAND1(3) type c,
AKONT(10) type c,
FDGRV(10) type c,
WAERS(3) type c,
end of it_xk01.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'C:\Documents and Settings\entegall\Desktop\vendor.txt'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = it_xk01.
loop at it_xk01.
refresh it_bdcdata.
perform open_group.
perform bdc_dynpro using 'SAPMF02K' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-REF_LIFNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR'
it_xk01-lifnr.
perform bdc_field using 'RF02K-BUKRS'
IT_XK01-BUKRS.
perform bdc_field using 'RF02K-EKORG'
IT_XK01-EKORG.
perform bdc_field using 'RF02K-KTOKK'
IT_XK01-KTOKK.
perform bdc_dynpro using 'SAPMF02K' '0110'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-LAND1'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFA1-NAME1'
IT_XK01-NAME1.
perform bdc_field using 'LFA1-SORTL'
IT_XK01-SORT1.
perform bdc_field using 'LFA1-NAME2'
perform bdc_field using 'LFA1-LAND1'
IT_XK01-LAND1.
perform bdc_dynpro using 'SAPMF02K' '0120'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-KUNNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-BANKS(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPMF02K' '0210'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-FDGRV'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFB1-AKONT'
IT_XK01-AKONT.
perform bdc_field using 'LFB1-FDGRV'
IT_XK01-FDGRV.
perform bdc_dynpro using 'SAPMF02K' '0215'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-ZTERM'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0220'.
perform bdc_field using 'BDC_CURSOR'
'LFB5-MAHNA'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0310'.
perform bdc_field using 'BDC_CURSOR'
'LFM1-WAERS'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFM1-WAERS'
IT_XK01-WAERS.
perform bdc_dynpro using 'SAPMF02K' '0320'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-LIFNR'.
perform bdc_field using 'BDC_OKCODE'
'=UPDA'.
*perform bdc_transaction using 'XK01' using IT_BDCDATA mode 'A' UPDATE 'S'
CALL TRANSACTION 'XK01' USING IT_BDCDATA
MODE 'A'
UPDATE 'S' MESSAGES INTO IT_BDCMSGCOLL.
*perform close_group.
endloop.
FORM BDC_DYNPRO USING PROG SCR.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROG.
IT_BDCDATA-DYNPRO = SCR.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.go through this porgarm u will get the clear picture about down loading the error msg.
PROGRAM ID : ZSD_CONDREC_DISCOUNT_ZSWD
DESCRIPTION : BDC PROGRAM TO UPLOAD CONDITION RECORDS FOR Discount
TRANSACTION : VK11
CONDITION TYPE : ZSWD(Key combination 3)
VERSION : 1.0
Text Elements
001 : Select Options
002 : C:\SD\Error\Discount-ZSWD
003 : Error Download Path
004 : C:\SD\Error\Discount-ZSWD - DDMMYYYY HH:MM:SS.txt
REPORT ZSD_CONDREC_DISCOUNT_ZSWD
MESSAGE-ID 00.
*include bdcrecx1.
TABLES : t100.
Internal table declaration *
DATA : BEGIN OF it_price OCCURS 0,
index(4), "Index
kschl(4), "Condition type
vkorg(4), "Sales organization
vtweg(2), "distribution channel
spart(2), "Division
matnr(18), "Material no
kbetr(11), "Rate
konwa(5), "Rate unit (currency or percentage)
kmein(3), "Condition unit
krech(1), "Calculation type for condition
datab(10), "Validity start date
datbi(10), "Validity end date
er_message(100),
END OF it_price.
Internal table to get the error data *
DATA : it_error LIKE it_price OCCURS 0 WITH HEADER LINE.
DATA : bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.
DATA : i_msgtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
Internal table to find the error from the legacy data *
DATA : BEGIN OF it_erfind OCCURS 0,
index(4), "Index
er_message(100), "For Error Message
END OF it_erfind.
Variables declaration *
DATA : g_message(200),
time(10),
date(10) ,
v_error_filename LIKE rlgrap-filename.
date = sy-datum.
time = sy-uzeit.
Initialization
INITIALIZATION.
Generating Error file name with date and time.
PERFORM make_file_name.
Selection Screen *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETER: p_file LIKE ibipparms-path OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-003.
SELECTION-SCREEN COMMENT 33(79) text-004.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN:END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file .
PERFORM get_filename.
Start of selection
START-OF-SELECTION.
PERFORM upload_data.
PERFORM fill_data.
END-OF-SELECTION.
*& Form fill_data
text
FORM fill_data.
LOOP AT it_price.
*Start of Screen 1
PERFORM bdc_dynpro USING 'SAPMV13A' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RV13A-KSCHL'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ANTA'.
PERFORM bdc_field USING 'RV13A-KSCHL'
it_price-kschl.
Key Combination: Sales org / Dist. channel / Division / Material
PERFORM bdc_dynpro USING 'SAPLV14A' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RV130-SELKZ(03)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=WEIT'.
PERFORM bdc_field USING 'RV130-SELKZ(03)'
'X'.
*Start of Screen 2
PERFORM bdc_dynpro USING 'SAPMV13A' '1800'.
PERFORM bdc_field USING 'KOMG-VKORG'
it_price-vkorg.
PERFORM bdc_field USING 'KOMG-VTWEG'
it_price-vtweg.
PERFORM bdc_field USING 'KOMG-SPART'
it_price-spart.
PERFORM bdc_field USING 'KOMG-MATNR(01)'
it_price-matnr.
PERFORM bdc_field USING 'KONP-KBETR(01)'
it_price-kbetr.
PERFORM bdc_field USING 'KONP-KONWA(01)'
it_price-konwa.
PERFORM bdc_field USING 'KONP-KMEIN(01)'
it_price-kmein.
PERFORM bdc_field USING 'RV13A-KRECH(01)'
it_price-krech.
PERFORM bdc_field USING 'RV13A-DATAB(01)'
it_price-datab.
PERFORM bdc_field USING 'RV13A-DATBI(01)'
it_price-datbi.
perform bdc_dynpro using 'SAPMV13A' '1821'.
perform bdc_field using 'BDC_CURSOR'
'KOMG-MATNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SICH'. "Save the entry
PERFORM bdc_transaction TABLES i_msgtab USING 'VK11' 'N' 'L'.
*To fetch the error message from the standard error table
SELECT SINGLE * FROM t100 WHERE sprsl = 'E'
AND arbgb = sy-msgid
AND msgnr = sy-msgno.
g_message = t100-text.
*subroutine to change the error message for every document number
PERFORM replace_parameters USING sy-msgv1
sy-msgv2
sy-msgv3
sy-msgv4
CHANGING g_message.
WRITE: / 'System variables:'.
SKIP.
WRITE: / ' Sy-msgty:', sy-msgty.
WRITE: / ' Sy-msgid:', sy-msgid.
WRITE: / ' Sy-msgno:', sy-msgno.
WRITE: / ' Sy-msgv1:', sy-msgv1.
WRITE: / ' Sy-msgv2:', sy-msgv2.
WRITE: / ' Sy-msgv3:', sy-msgv3.
WRITE: / ' Sy-msgv4:', sy-msgv4.
SKIP.
WRITE: / 'Message:'.
SKIP.
WRITE: / sy-msgty, g_message.
*To find out the error in the legacy data if there is anything and pass
*the document no with error message to the seperate internal table
*called it_erfind
IF sy-msgty = 'E'.
it_erfind-index = it_price-index.
it_erfind-er_message = g_message.
APPEND it_erfind.
ENDIF.
*Finally we are segregating the error and downloading the error data.
AT LAST.
*To segregate the error
PERFORM segregate_error.
*To download the error from it_error internal table with err mesg
PERFORM error_download.
PERFORM display_message.
ENDAT.
ENDLOOP.
perform close_group.
CLEAR it_price.
ENDFORM. "fill_data
*Subrotine to replace the parameters
FORM replace_parameters USING p_par_1 p_par_2 p_par_3
p_par_4 CHANGING p_message.
erst mal pruefen, ob numerierte Parameter verwendet wurden
DO.
REPLACE '&1' WITH p_par_1 INTO p_message.
IF sy-subrc <> 0.
EXIT.
ENDIF.
ENDDO.
DO.
REPLACE '&2' WITH p_par_2 INTO p_message.
IF sy-subrc <> 0.
EXIT.
ENDIF.
ENDDO.
DO.
REPLACE '&3' WITH p_par_3 INTO p_message.
IF sy-subrc <> 0.
EXIT.
ENDIF.
ENDDO.
DO.
REPLACE '&4' WITH p_par_4 INTO p_message.
IF sy-subrc <> 0.
EXIT.
ENDIF.
ENDDO.
falls keine numerierten Parameter vorh., ersetzen wie gehabt
REPLACE '&' WITH p_par_1 INTO p_message.
CONDENSE p_message.
IF sy-subrc EQ 0.
REPLACE '&' WITH p_par_2 INTO p_message.
CONDENSE p_message.
IF sy-subrc EQ 0.
REPLACE '&' WITH p_par_3 INTO p_message.
CONDENSE p_message.
IF sy-subrc EQ 0.
REPLACE '&' WITH p_par_4 INTO p_message.
CONDENSE p_message.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. "REPLACE_PARAMETERS
*Subroutine to segregate the error data from the legacy data
FORM segregate_error.
LOOP AT it_erfind.
LOOP AT it_price WHERE index = it_erfind-index.
MOVE-CORRESPONDING it_price TO it_error.
it_error-er_message = it_erfind-er_message.
APPEND it_error.
ENDLOOP.
ENDLOOP.
ENDFORM. "segregate_error
*Subroutine to download the error data from the it_error table.
FORM error_download.
IF it_error[] IS NOT INITIAL.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
codepage = 'IBM'
filename = v_error_filename
filetype = 'DAT'
TABLES
data_tab = it_error.
ENDIF.
ENDFORM. "error_download
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM. "BDC_DYNPRO
Insert field *
FORM bdc_field USING fnam fval.
IF FVAL <> NODATA.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDIF.
ENDFORM. "BDC_FIELD
*& Form bdc_transaction
text
-->MESSTAB text
-->TCODE text
-->CTUMODE text
-->CUPDATE text
FORM bdc_transaction TABLES messtab USING tcode ctumode cupdate .
CALL TRANSACTION tcode USING bdcdata
MODE ctumode
UPDATE cupdate
MESSAGES INTO messtab.
REFRESH bdcdata.
CLEAR bdcdata.
ENDFORM. " bdc_transaction
Uploading data file to internal table. *
FORM upload_data.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = p_file
CODEPAGE = 'IBM '
filetype = 'DAT'
TABLES
data_tab = it_price
EXCEPTIONS
conversion_error = 1
invalid_table_width = 2
invalid_type = 3
no_batch = 4
unknown_error = 5
gui_refuse_filetransfer = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. "upload_data
*& Form display_message
FORM display_message .
IF it_error[] IS INITIAL.
MESSAGE i019(zmsg). "Success
ELSE.
MESSAGE e020(zmsg). "Failed
ENDIF.
ENDFORM. " display_message
*& Form get_filename
text
--> p1 text
<-- p2 text
FORM get_filename .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
FIELD_NAME = p_file
IMPORTING
file_name = p_file .
IF sy-subrc NE 0 .
WRITE : / 'Enter File Name'.
ENDIF.
ENDFORM. " get_filename
*& Form make_file_name
FORM make_file_name .
WRITE sy-datum TO date MM/DD/YYYY.
WRITE sy-uzeit TO time USING EDIT MASK ' __ __ __'.
CONCATENATE text-002 date time '.txt'
INTO v_error_filename.
ENDFORM. " make_file_name
regards
prabhu -
Data not updated in business entity after change in architectural object
Hi,
A business entity was created from Architectural Object.
When we modify the address in the architectural object, the data is not updated in the business entity.
Is there any solution that make an automatic update for the address in business entity after a change in architectural object ?
Thx for your help.
Regards
SaadHi,
I have created new infopackage and ran. Now the following message I have got on the monitor.
"Data not received in PSA Table
Diagnosis
Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump."
Any more thoughts?
Thanks,
Rao. -
Data not Updated in Custom Screen fields-Vendor Master
Hello,
I have created a custom screen in vendor master transaction and also implemented the two BADI's below.
Business Add-In: Processing Master Data Enhancements
(CUSTOMER_ADD_DATA/VENDOR_ADD_DATA)
Passed the Custom Program and Screen No in the method GET_TAXI_SCREEN
Business Add-In: Customer Subscreens
(CUSTOMER_ADD_DATA_CS/VENDOR_ADD_DATA_CS)
activate it with the BADI Processing Master Data Enhancements with method CHECK_ADD_ON_ACTIVE.
I also created a new screen and used few fields from LFA1 (Append structure fields) such that the fields on the screen are : LFA1-ZZFIELD1 etc...
Now the issue is the screen is displayed, but the data entered on the screen is not updated on the table LFA1 or data from the table is not displayed on the custom screen.
Am i missing something?
Regards,
ShivaSolved this problem.
I built the query against InfoCube and not the characteristic itself. That's why I can't see the update.
Thanks. -
Data not updating to enhanced field in bw from psa to target
Dear Experts,
I am loading data from datsource to target by using transformations and getting the data for all fields to PSA and i am running DTP the for one field the data is not updating,transformations and dtp also active but in DTP when i gone for with debugging mode in simulation that particular fields transformations are not appearing same thing happened in from one DSO to another DSO loading,anybody can help me for coming out of this problem thanks in advance and ur help will be appercited.
Thanks & Regards,
k.sathishHI,
It might be the patch level, anyways what you can do is open that particular transformations, then on the top menu bars click on extras => display generated program. once you click on this the program behind the transformations will be displayed, check in the methods if that fields is assigned , if you locate that rule, put a break point and do that DTP debugg simulation you can see that in debug.
2. Quick solution will be to delete that field transformations, activate it and again create transformation for that activate activate it.
hope it helps
thanks
syed
Maybe you are looking for
-
We've been using Adobe Photoshop Album Starter Ed 3.0 but just experienced a problem. We have photos uploaded fm a digital camera that didn't transfer fm Album Starter 3.0 to our computer. The source photos were deleted fm camera. I re-installed t
-
Target a button inside of a Movie Clip
I am trying to target a button inside a dynamically loaded movieclip, such as the following (but is not working): clipAnswerYesNo: Movieclip testbutton: embeded button Script is on main timeline. _root.clipAnswerYesNo.testbutton.onRelease = function(
-
Hpe363xa_ConfigureVoltageLevel configuration of voltage 25 V is not possible.
I try to use hpe363xa_ConfigureVoltageLevel with "1" as channel parameter and a voltage value of 50 Volts with an HPE33634a device. The problem ist that the function accept voltage between 0 and 25 volts. Higher voltage (> 25 V) value causes an error
-
P_ORGINCON Authorization Value of P
Hi Guys, We have had an issue when attempting to write to the Compensation process infotype via EP. After performing a Systems Trace the below check was shown: INFTY=0759;SUBTY=ISA7;AUTHC=P;PERSA=;PERSG=;PERSK=;VDSK1=;PROFL=*; As you can see AUTHC
-
Dear All, I have some problem in my small network. I have two sf300 switch and configure nealry 8 vlan in sw1. sw1 and sw2 connnected through trunk. 1 - 8 ports are in vlan 11 - int vlan 10.1.11.250/24 9 - 13 port are in vlan 12 the pro