JBL wireless subwoofer signal now interferes with my Apple TV wireless signal.
Ever since the newest software update, my Apple TV wireless signal interferes with my wireless subwoofer signal, immediately shutting off the music I am playing via Apple TV. I have had my Apple TV since December 2011 with the same exact speaker set up and wireless internet and it worked fine - everything was compatible. Ever since the latest software update (I updated my ATV software around the time when Apple released the 1080 HD Apple TV last month) my wireless subwoofer's signal interferes with the streaming wireless signal, immediately shutting down the music that's playing through ATV.
It is obviously the subwoofer because everything works fine when I switch the subwoofer off. I have tried changing the channel of my woofer and the frequency of my wireless internet, but the problem persists.
My biggest frustration is that everything worked fine and was compatible up until the last few weeks. Has anyone else experienced this? Any solutions or advice?
Thanks!
It's actually your subwoofers fault. I have a Samsung wireless subwoofer and it uses 2.4 and 5ghz the same frequencies WiFi use, it is supposed to pick a channel that isn't used. It occasionally goes out for a split second.
2.4 has channels like 1-12
5 has like 5 channels something like 145-150 or something
Your subwoofer is picking the same channel your wifi router is using. Wait I just say you said you checked your WiFi channel. Was your router on "Auto" channel selection before you changed it? Does your router support 2.4 and 5ghz? if so are both set to broadcast same network name and password?
On a computer go to http://tools.meraki.com/stumbler and see how many routers are near you and what channels they are using. What kind of router do you use?
Similar Messages
-
How can I order a calendar that I created in iPhoto 7.1.5 which is now incompatible with the Apple Store? I am using a mac pro 1,1 which cannot upgrade to the new version of iPhoto.
You could try to upgrade to an earlier iPhoto '11 version, since you are running Snowleopard.
iPhoto '11 should still be available as part of the boxed retail version of iLife '11.
Try to buy one at Amazon, then upgrade to iPhoto 9.2.x from the Support page: http://support.apple.com/downloads/#iphoto%209.2 -
Stuck with the Apple and nothing else
It seems many are having problems with the recent software update. Me too - can anyone help?
Following the update I am now stuck with the Apple sign. When I do a restore (Menu/Play) the apple sign dissaperars, then comes back and I am back where I started.
My computer no longer recognises my iPod either!
Any ideas?The most likely solution, Angel, is to restore your iPod then re-sync with iTunes to load your songs on. See this:
Restoring iPod to Factory Settings -
HT4623 my i 4 has just frozen with the apple logo on the screen and a bar underneath it?
just updating my software on my i4 it has now frozen with the apple logo and a inch long bar under the logo,i cannot swicth it off or anything?? Help
- Try:
iOS: Not responding or does not turn on
- If not successful, let the battery fully drain. After charging for at least an hour try again
- If still not successful, time for an appointment at the Genius Bar of an Apple store. -
Deleting a friends number associated with my Apple ID
I used a friends iPhone 4 for awhile with my Apple ID in some areas and hers in another . She then put her sim back in nye phone and her phone number is now associated with my Apple ID . How do I take it off ??
Hi Janinafromqld,
Thanks for visiting Apple Support Communities.
I recommend these methods to unlink your friend's phone number with your Apple ID:
Unlink a phone number
To remove a phone number from an Apple ID, sign out of FaceTime and Messages on your iPhone:
Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
This should remove your phone number from other devices using the same Apple ID with FaceTime and Messages. If the phone number is still available on other devices after you sign out of FaceTime and iMessage on the iPhone, you may need to sign out of iMessage and FaceTime on all your devices, then sign in to FaceTime and Messages again on devices you want to use.
Note: If you no longer have access to the iPhone that is using the number you want to remove, reset your Apple ID password.
You can find the article with this information here:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Cheers,
Jeremy -
Can people interfere with the wireless signal?
This is strange and I can't figure it out. My Linksys WRT54GSv5 router works fine with my notebook accessing the internet. When certain friends of mine come over, the wireless internet quits working the minute they enter my kitchen, that's where my notebook computer is. I'm connected to the wireless network, but no web pages will load. When they leave, everything works again without rebooting or anything. Is there an explanation for this?
This has happened 4 times in a row when they came over. Yesterday, while they were walking up to my house, I tried to load a web page on my notebook and it worked fine. The minute they entered the kitchen, I tried a web page again and it would not load. I wonder if there is a device that may interfere with the wireless signal that they have with them. There was no microwave in use. As far as I know, my friends are not robots. But maybe they are aliens from another planet. Seriously, I can't figure out why this is happening.
-
I bought my dad a new ipod nano and a jbl wireless speaker from the same apple store. Everything worked perfectly with the bluetooth connectivity the first day. Then my dad accidentally hit the "forget this device" button when he was trying to turn the bluetooth off. Now the nano either does not recognize the device or it will recognize the device but not connect. I would appreciate any advice.
Does it charge on a computer? Does it appear in iTunes?
If so:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Also see:
- See:
iPod touch: Hardware troubleshooting
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic. -
Will wireless keyboard for 1 iPad interfere with another iPad?
I have an iPad 2 (WiFi) on order. I will probably get a second one for my wife.
I have 2 questions about the wireless keyboard:
1) If I get a wireless keyboard, can I use it for either iPad?
2) If my wife and I are both using apps at the same time on our separate iPads that require text input and my wife is using the keyboard for hers, will it interfere with the text input on my iPad?You can have multiple iPads in the same room, each with their own assigned/paired keyboard. I suppose at some level they might interfere with each other (like tens of thousands of cell phones at a BIG sports event), but I have seen labs with dozens of keyboards and iPads with no problem!
-
I've bought leather case for iPhone 4 with a magnet clip situated on the back side just above the "apple" label. Can it interfere with any signals or made other damage?
I have been using a leather case with a magnetic clasp for months. The only side effect is that I need to recalibrate the compass app when I use it. This is really not a problem since I don't use the compass app very often. I haven't encountered any other interference or problems.
-
Will the bumper interfere with signal strength
This might be a stupid question but hear goes.
With the iphone 4 the antenna is built into the band around the phone. If I put the rubber bumper around the phone will that interfere with the signal strength..Except the Apple one is hard plastic coated in rubber. The marware one is pure rubber with rubber pads for the buttons.
I would rather spend the $30.00 on Apple's version with the meta buttons, hard plastic coated in rubber and made to work perfectly with the iPhone 4 than to buy a molded piece of rubber that will stretch out and may make button pressing horrible. -
I bought a new Iphone 4s, gave the older to my wife , made a new account for her, erased all data and now when i sync them they interfere with the other. Eg: if i delete an app ou buy one it appears on her phone, what should I do?
Have a look here...
Automatic Downloads...
http://support.apple.com/kb/ht4539
Turn off Automatic Downloads. Settings > Store -
Mini dvi to dvi adapter interferes with airport ?
Hi,
I am seeing slower network speed (20% of the normal speed), when I use the mini-dvi-to-dvi adapter... I also have a mini-dvi-to-vga adapter which doesn't cause this network speed degradation.
I guess the dvi adapter somehow interferes with the signals the airport sends and receives. The adapter comes with a very short cable (a couple of inches), so I can't move it out of the way to reduce interference (assuming that is the issue).
In both cases, the adapters connect to the same external display (1920 x 1200) and they both work fine for my monitor. But I'd like to use the mini-dvi-to-dvi adapter because of the (slightly) better picture quality.
But perhaps it's not interference, anyone else has ideas ?
Unless anyone has a suggestion, I am going to return the mini-dvi-to-dvi adapter because it's pretty useless if it interferes with the airport.
For now, I'd recommend others to buy a mini-dvi-to-vga adapter for their external displays...
iMac, Mac Book and Mac Mini Mac OS X (10.4.8)Yes, I have that option set... but your response reminds me that that I haven't tried setting it off, see if that makes a difference (would be quite ironical if setting off "robustness" fixed it
Since yours works, I wonder if it depends on the wireless router I use; I have a Netgear WTG624
Thanks, -
Bluetooth interferes with WiFi in Yosemite 10.10 (reproducible)
There is a long (40 pages so far) thread about WiFi issues with Yosemite. However, I believe it has become a catchall thread for all kinds of connectivity problems and a growing number of "solutions" address only a few of them.
So I wanted to start a separate thread about a very specific issue I found to be easily reproducible: turning on Bluetooth in Yosemite 10.10 interferes with WiFi, lowering the bandwidth in a measurable way. I have tested this on two different MacBook Pro Retina (mid-2011 and late-2013) and an Apple Airport router.
To test is yourself do the following:
Move away from the WiFi access point so the signal is not at full strength
Turn Bluetooth Off
Visit speedtest.net and run a speed test a handful of times (average the results discarding the outliers, i.e. the fastest and the slowest)
Turn Bluetooth On
Repeat Step 2 and compare results
In my case I see a 30% drop in download speed and about a 50% drop in upload speed. I'm not a hardware/radio engineer but I think it's pretty clear that the WiFi and Bluetooth drivers for the initial release version of Yosemite are causing some kind of interference. This is obviously wrong. Unless there is a programmable parameter that can be tweaked for these drivers, I doubt there is anything we can do about it until Apple releases an update with 10.10.1.
Turning off Bluetooth is an obvious fix for the WiFi issues but it is clearly not useful if you depend on Bluetooth accessories and defeats the purpose of may cool Yosemite features like Handoff.
Is anybody else seeing this in their environment?I also still see the problem with 10.10.2
I posted these stats in the WiFi problems thread (>150 pages by now) but I'll post it here as well:
## Bluetooth OFF
## Average: 66.12 Mbits/sec
## (max and min values discarded)
IkeMBP:local$ iperf -c herobrine -t 120 -i 10
Client connecting to herobrine, TCP port 5001
TCP window size: 129 KByte (default)
[ 5] local 192.168.1.162 port 55484 connected with 192.168.1.30 port 5001
[ ID] Interval Transfer Bandwidth
[ 5] 0.0-10.0 sec 80.2 MBytes 67.3 Mbits/sec
[ 5] 10.0-20.0 sec 79.4 MBytes 66.6 Mbits/sec
[ 5] 20.0-30.0 sec 79.0 MBytes 66.3 Mbits/sec
[ 5] 30.0-40.0 sec 77.9 MBytes 65.3 Mbits/sec
[ 5] 40.0-50.0 sec 76.5 MBytes 64.2 Mbits/sec
[ 5] 50.0-60.0 sec 78.5 MBytes 65.9 Mbits/sec
[ 5] 60.0-70.0 sec 80.0 MBytes 67.1 Mbits/sec
[ 5] 70.0-80.0 sec 78.4 MBytes 65.7 Mbits/sec
[ 5] 80.0-90.0 sec 74.6 MBytes 62.6 Mbits/sec
[ 5] 90.0-100.0 sec 78.5 MBytes 65.9 Mbits/sec
[ 5] 100.0-110.0 sec 79.9 MBytes 67.0 Mbits/sec
[ 5] 110.0-120.0 sec 80.8 MBytes 67.7 Mbits/sec
[ 5] 0.0-120.0 sec 944 MBytes 66.0 Mbits/sec
## Bluetooth ON and no device connected
## Average: 58.40 Mbits/sec
## (max and min values discarded)
IkeMBP:local$ iperf -c herobrine -t 120 -i 10
Client connecting to herobrine, TCP port 5001
TCP window size: 129 KByte (default)
[ 5] local 192.168.1.162 port 55491 connected with 192.168.1.30 port 5001
[ ID] Interval Transfer Bandwidth
[ 5] 0.0-10.0 sec 70.0 MBytes 58.7 Mbits/sec
[ 5] 10.0-20.0 sec 71.0 MBytes 59.6 Mbits/sec
[ 5] 20.0-30.0 sec 68.6 MBytes 57.6 Mbits/sec
[ 5] 30.0-40.0 sec 70.4 MBytes 59.0 Mbits/sec
[ 5] 40.0-50.0 sec 72.9 MBytes 61.1 Mbits/sec
[ 5] 50.0-60.0 sec 70.2 MBytes 58.9 Mbits/sec
[ 5] 60.0-70.0 sec 72.2 MBytes 60.6 Mbits/sec
[ 5] 70.0-80.0 sec 70.0 MBytes 58.7 Mbits/sec
[ 5] 80.0-90.0 sec 62.5 MBytes 52.4 Mbits/sec
[ 5] 90.0-100.0 sec 70.1 MBytes 58.8 Mbits/sec
[ 5] 100.0-110.0 sec 66.5 MBytes 55.8 Mbits/sec
[ 5] 110.0-120.0 sec 67.4 MBytes 56.5 Mbits/sec
[ 5] 0.0-120.0 sec 832 MBytes 58.2 Mbits/sec
## Bluetooth ON and Magic Mouse CONNECTED
## Average: 38.08 Mbits/sec
## (max and min values discarded)
IkeMBP:local$ iperf -c herobrine -t 120 -i 10
Client connecting to herobrine, TCP port 5001
TCP window size: 129 KByte (default)
[ 5] local 192.168.1.162 port 55481 connected with 192.168.1.30 port 5001
[ ID] Interval Transfer Bandwidth
[ 5] 0.0-10.0 sec 46.4 MBytes 38.9 Mbits/sec
[ 5] 10.0-20.0 sec 46.6 MBytes 39.1 Mbits/sec
[ 5] 20.0-30.0 sec 52.6 MBytes 44.1 Mbits/sec
[ 5] 30.0-40.0 sec 46.1 MBytes 38.7 Mbits/sec
[ 5] 40.0-50.0 sec 46.1 MBytes 38.7 Mbits/sec
[ 5] 50.0-60.0 sec 45.5 MBytes 38.2 Mbits/sec
[ 5] 60.0-70.0 sec 40.5 MBytes 34.0 Mbits/sec
[ 5] 70.0-80.0 sec 38.1 MBytes 32.0 Mbits/sec
[ 5] 80.0-90.0 sec 43.4 MBytes 36.4 Mbits/sec
[ 5] 90.0-100.0 sec 46.8 MBytes 39.2 Mbits/sec
[ 5] 100.0-110.0 sec 45.9 MBytes 38.5 Mbits/sec
[ 5] 110.0-120.0 sec 46.6 MBytes 39.1 Mbits/sec
[ 5] 0.0-120.0 sec 545 MBytes 38.1 Mbits/sec
## 802.11n (5GHz) - Bluetooth ON and Magic Mouse CONNECTED
## Average: 38.08 Mbits/sec
## (max and min values discarded)
IkeMBP:~$ iperf -c herobrine -t 120 -i 10
Client connecting to herobrine, TCP port 5001
TCP window size: 129 KByte (default)
[ 5] local 192.168.1.162 port 53924 connected with 192.168.1.30 port 5001
[ ID] Interval Transfer Bandwidth
[ 5] 0.0-10.0 sec 94.9 MBytes 79.6 Mbits/sec
[ 5] 10.0-20.0 sec 98.8 MBytes 82.8 Mbits/sec
[ 5] 20.0-30.0 sec 98.1 MBytes 82.3 Mbits/sec
[ 5] 30.0-40.0 sec 98.2 MBytes 82.4 Mbits/sec
[ 5] 40.0-50.0 sec 98.4 MBytes 82.5 Mbits/sec
[ 5] 50.0-60.0 sec 97.6 MBytes 81.9 Mbits/sec
[ 5] 60.0-70.0 sec 98.2 MBytes 82.4 Mbits/sec
[ 5] 70.0-80.0 sec 98.0 MBytes 82.2 Mbits/sec
[ 5] 80.0-90.0 sec 97.5 MBytes 81.8 Mbits/sec
[ 5] 90.0-100.0 sec 98.4 MBytes 82.5 Mbits/sec
[ 5] 100.0-110.0 sec 99.6 MBytes 83.6 Mbits/sec
[ 5] 110.0-120.0 sec 50.9 MBytes 42.7 Mbits/sec
[ 5] 0.0-120.0 sec 1.10 GBytes 78.9 Mbits/sec
Also noticed the consistency and stability of the 5 GHz test -
My Logitech mouse interferes with the display.
Ever since updating to Mavericks several months ago my Logitech M225 wireless mouse will occasionally interfere with the display memory when coming out of sleep mode. This happens every few days and can only be cleared by restarting my MacBook Pro. If it comes out of sleep fine there is never a problem. The interference is in the form of columns of random bits distributed here and there across the display. Each movement of the mouse results in changing interference. I'm now at OS version OS X 10.9.4 (13E28). This happens when using an external monitor.
MBP does not sleep when display is closed?
For: A portable Mac doesn't appear to respond properly when you close or open the lid.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own". -
How can I delete my first apple ID it interferes with apps I want to buy using my iCloud id
I recently had my macbook pro worked on at apple, with great success. I was told I would be able to delete my first apple ID which is a me.com account
I now use I cloud and want the other to go away for good.. But it isn't as they said it would. It interferes with purchases on my I-phone and I don't even remember the password. Is it possible to delete it ? if so How ???You cannot delete an Apple ID. You can just stop using it. You should change the iCloud Apple ID address you now are using in the device to the new one you wish to use. I suggest you tab Settings > General > Reset > Settings, then reconfigure your phone this time using your new Apple ID.
Maybe you are looking for
-
Oracle BPM 11gR1 Patchset 2 AWS
I was working with the Oracle BPM 11gR1 Patchset 2 that was created by Oracle on the Amazon Wed Service (AWS) cloud. I have it installed and everything is working. Howerver, because it is a image that was created by Oracle, what are the passwords for
-
Hi, I have tables like this: Table1: Year | ID | col1 2007 | 1 | x Table2: Year | ID | Date 2007 | 1 | dd/mm/yyyy 2007 | 1 | dd/mm/yyyy Now I need to get the result like this in one row: Year | ID | Date1 | Date2 2007 | 1 | dd/mm/yyyy| dd/mm/yyyy For
-
SQL Developer Error when connecting to Listener on Glassfish
I am having some issues with connecting to Apex Listener via SQL Developer. I get "cannot connect to connection" when I attempt to connect. I do get apex pages (when I use the Glassfish default port - it doesn't seem to take the specified port which
-
Reporting Points in REM.
Hi PP Gurus, Please throw some light on how to create Reporting Points in Repetitive Manufacturing? I know that those operation to be defined as Reporting points must contain Control Key with Milestone Confirmation. Please make some deatailed remarks
-
Is there a file manager app that does NOT connect to the cloud?
I need a file manager that will allow people to open, read and save files from various traditional sofrware such as PDF, .DOC, .XLS, etc. It CANNOT have cloud capabilities but only be local on their personal ipad. Does anyone know of such an app (t