Jbo:Row data tag and the RowKey parameter

Hi,
According to the help system (Creating JSP Pages/Working with Data Tags/Navigating DataSources/Row data tag) it is possible to get the row key from the datasource tag. However, the datasource tag does not have such property - I've checked the ViewObjectTag's source - no memory of such property/method was there.
How do I obtain the rowkey value of a row in the datasource?
Regards,
Arik.
null

Thanks - you should fix the documentation though - the docs say "mydatasource.getRowKey()"
See above for the exact path where it shows..
Regards,
Arik.
null

Similar Messages

Passing variables between data tag and Java

Hello all,
I have a question about using variables between data tag and java.
Let me explain.
I would like to populate variable "Test" with
the information returned by jbo data tag library.
<code>
<% String Test = "%><jbo:ShowValue datasource="ds" dataitem="Cod" /><%";%>
or
<% String Test = "<jbo:ShowValue datasource="ds" dataitem="Cod" />";%>
</code>
This code did not work.
Some suggestions
Thanks
Humberto
null

Humberto,
I'm afraid I do not know the specific answer
to your question (perhaps Juan the Data Tag
Wizard will reply ;-). I vaguely recall
struggling with teh same issue when I was
playing with the tags for a demo. Here
is a hack-around lifted from my demo
that might help:
<jbo:Row id="privRow" action="CURRENT" datasource="privileges" />
<%
String privName = (String)privRow.getAttribute("Privilegename");
%>
In other words, I ended up using the Row
tag to get a local Java variable bound to the
row instance and then used its methods
to extract the value. I presume the class
of the row instance is oracle.jbo.Row
and you can lookup its supported methods
in the reference doc.
I'd be interested to hear if their is a more
elegant way - the one suggested above is
pretty tedious.
Regards,
Bill
----

When I open numbers, my spreadsheet appears blank. yet, when I moveacrossa row, data appears in the formula bar. How can I fix it so I can see the sheet?

When I open numbers, my spreadsheet appears blank. yet, when I moveacrossa row, data appears in the formula bar. How can I fix it so I can see the sheet?

I had the same issue for several days (and several reboots). During that time I found I could print the spread sheet as a pdf, though I couldn't see it except cell by cell.
Suddenly the problem disappeared. I never did know why the problem appeared nor why it disappeared.
In the interim I ran the disk utility several times and repaired permissions twice. That may have helped, but I don't know.

HT4914 I want to transfer my entire iTunes "folder" from a newer iMac 3.06 GHz Core 2 machine running iTunes 10.7 to an older iMac running OSx 10.5.8. How best to do this and keep all my data, tags and covers in tact?

I want to transfer my entire iTunes "folder" from a newer iMac 3.06 GHz Core 2 machine running iTunes 10.7 to an older iMac running OSx 10.5.8. How best to do this and keep all my data, tags and covers in tact?

Firstly, time to get rid of the 2 x 512MB FBDIMMs in there, they add more heat and use more watts then they add to the system. If you need more, and 4 or 8 DIMMs is ideal, Amazon has 2x2GB sets $22 - about 1/50th what I paid for 1GB new.
Buy a 250GB Samsung EVO SSD $129
Pick up Carbon Copy Cloner http://www.bombich.com to clone the system to the SSD
A sled adapter for the SSD from Icy Dock $14 Amazon.com
7-8 years overdue for new system drive! amazed it lasted this long. An SSD plus some WD Black 2TB drives or larger should do the trick.
you can also put the SSD in the lower optical drive bay and use one of the two ODD "spare" SATA ports for the SSD - an SSD is the best way to improve the performance of our old Mac Pro 2006-7 models.
When you downloaded the Lion installer that was when to create a flash type installer with Lion DiskMaker.
If you have put in a new-ish graphic card then OS X 10.6.0 may not support it.

How can I force Time Machine to make a complete backup of my Hard Drive. I just installed a new external drive for Backup since my previous one failed. Now when I back up, Time Machine only backs up my data folder and the Users folder.

How can I force Time Machine to make a complete backup of my Hard Drive. I just installed a new external drive for Backup since my previous one failed. Now when I back up, Time Machine only backs up my data folder and the Users folder.
When I start a backup. Time Machine says "Oldest Backup: None; Latest Backup: None", so it seems like it should do a complete backup, but it only does a partial.

Hi I'd like to jump in here. Your app showed me this:
Time Machine:
          Skip System Files: NO
          Mobile backups: OFF
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 749.3 GB Disk used: 453.81 GB
          Destinations:
                    Plastic Wrapper [Local] (Last used)
                    Total size: 999.86 GB
                    Total number of backups: 64
                    Oldest backup: 2013-07-24 23:25:11 +0000
                    Last backup: 2013-11-17 01:40:47 +0000
                    Size of backup disk: Too small
                              Backup size 999.86 GB < (Disk used 453.81 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
          /sbin excluded from backup!
          /usr excluded from backup!
          /System excluded from backup!
          /bin excluded from backup!
          /private excluded from backup!
          /Library excluded from backup!
          /Applications excluded from backup!
Aside from the size of my backup drive, which I will increase at some point, I'd really like to have time machine backing up all system folders, especially Applications. How to I reset this hidden exclusions?
Thanks,
Darcy

Differences between the Portal Data Collector and the Activity Data Collect

Hello,
I want to know what are the differences between the Portal Data Collector and the Activity Data Collector?
Best Regards.
Pablo Mortera.

All of my SQL Server instances are sql server 2008r2 standard edition(10.50.2500). MDW is existing database, I try to setup collection sets for multiple instances and store data in one central MDW database
I create MDW in one instance, then run run configure Management Data Warehouse in target intance. collection sets were created successfully, but job failed with following error:
Executed as user: COCAD\INTDEPT01SQLAgentC10. The Management Data Warehouse version "00.00.0000.00" is not supported by the current data collector. Please upgrade the Management Data Warehouse by running the Management Data Warehouse Configuration
Wizard. Process Exit Code 5. The step failed.
Thanks
PAULqaz

Interleaved data saving and the TDMS Viewer VI.

Hello,
I'm using LabVIEW 2009 Service Pack 1 ( ver 9.0.1 32-bit ).
I was trying to take a piece of data and save it in interleaved mode.
The save operation seems to be completed correctly, but when the TDMS Viewer VI is launched it crashes, and I'm unable to browse the data.
I'm attaching the example I used.
What I want to know is:
1) am I using the write properly? What I'm trying to acomplish is to push down an array if I16 to a TDMS write block, recieve 30 channels of data this way.
2) I managed to use this VI and it crashes, on two PC's, one is a win7 32bit, the second one was an XP. But let me know if this runs properly for you.
Maciej
Attachments:
InterleavedDataErr.zip ‏16 KB

I have a buffer that can accumulate up to 65536 I16 values.
In that buffer I get for example 6x 10000 values.
Every "chunk" of the 10000 values is my interleaved data. One point is one channel.
My data is shaped like in the opening post:
http://forums.ni.com/t5/LabVIEW/TDMS-Streaming-in-interleaved-mode/m-p/1189201#M513943
Since I'm running a windows machine, sometimes I'll get 5x 10000 values, sometimes it will be 3x , sometimes 6x during one buffer swipe.
The data rate and the channel length is variable.
But let's talk about one case:
10k channels and 10 kHz rate of I16 vals.
That gives me roughly 200 MB/s of data that I need to get out of the buffer.
What I want to do on my PC is take that data, and save it interleaved to a TDMS file, while being able to safely stay above the 200 MB/s.
I would be intersted in aiming for 300 MB/s so that if we push our card further down the line, I'm not stuck with the streaming bandwitch.
I have noticed that unfortunately if you use an ammount of channles that is 10000 the writing performance drops dramatically.
What I figured out is that I'm not conducting 1 write on 10000 channels on a small ammount of data. But rather than that a large accumulated amount of data (like 8000 x 10000 of I16)
And I split the save of 10000 channels into 10x 1000 channels save.
First channs from 0-999 , than 1000-1999 etc.
All is done in interleaved mode.
This is Very Very fast indeed. I got rates of 360 MB/s. That's smoking fast!
Now the trick is... to handle the appropriate data shaping in the RAM, from my buffer, to the large shaped RAM chunk, that will be cut in to pieces for Streaming. LV is designed for data flow and copies data a lot, hence I get easlity in the out of memory problem, I'm going to have to use some ticks like storing the data structure via a VI Server call, or perhaps queues don't know yet. But I'm going to do some reading on that and it seems that this should be achieavable.
Thank you both for your input,
I will post if I get stuck.
Maciej

SQL ENTERPRISE: The edition of Reporting Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database

The error below makes absolutely no sense! I'm using Enterprise Core...yet I'm being told I can't use remote data sources:
w3wp!library!8!03/05/2015-19:08:48:: i INFO: Catalog SQL Server Edition = EnterpriseCore
w3wp!library!8!03/05/2015-19:08:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: The feature: "The edition of Reporting
Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database." is not supported in this edition of Reporting Services.;
Really? This totally contradicts the documentation found here:
https://msdn.microsoft.com/en-us/library/ms157285(v=sql.110).aspx
That article says remote connections are completely supported.
ARGH! Why does this have to be so difficult to setup?!?

Hi jeffoliver1000,
According to your description, you are using Enterprise Core edition and you are prompted that you can’t use remote data sources.
In your scenario, we neither ignore your point nor be doubt with what you say. But actually we have met the case before that even though the SQL Server engine is Enterprise but the reporting services is still standard. So I would recommend you to find the
actual edition of reporting services you are using. You can find Reporting Services starting SKU in the Reporting Service logs ( default location: C:\Program Files\Microsoft SQL Server\<instance name>\Reporting Services\LogFiles). For more information,
please refer to the similar thread below:
https://social.technet.microsoft.com/Forums/en-US/f98c2f3e-1a30-4993-ab41-acbc5014f92e/data-driven-subscription-button-not-displayed?forum=sqlreportingservices
By the way, have you installed the other SQL Server edition before?
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Registering with the WebEx Data Center and the Cisco WebEx Node Management System

Dear guys, ...
Please help,
i want to implement to webex node ASR1000, i have read in "Configuring the Cisco Webex Node for ASR 100.pdf", there is prerequisites to implement it, that is "Registering with the WebEx Data Center and the Cisco WebEx Node Management System"
Can someone tell how to "Registering with the WebEx Data Center and the Cisco WebEx Node Management System"
Are there any step by step documentation to "Registering with the WebEx Data Center and the Cisco WebEx Node Management System"?
Thank you
BR

You should have received a PAK Key with your order. Go to Cisco licensing and enter the PAK Key as this will start the process. Once the PAK Key is validated a screen will be displayed to enter your request for ASR 100 integration. It normally takes a few days to a couple of weeks to get the information back from WebEx needed to configure your ASR.
If you did not get a PAK Key contact your WebEx rep to get the process started to integrate your ASR to your WebEx site.
Hope this helps
John

Date Formatting, JSTL tags and the Spring framework

Hi all, i have a small problem and i am hoping maybe someone here knows the solution. I am using a date field in a search page, binding it using a customDateEditor, and using a validator for correct formatting. The problem i have is this: i am using the <spring:bind> tag so that the page will return with the value that caused a validation fault. But even if the page succeeds it is submitted back onto itself, this time carrying the search results. But this time the date field will return in a completly different format. I cannot use the <fmt:formatDate> tag because of <spring:bind>. How can i register a "reverse" bind editor if you will, something that will print my data according to a specific format depending on the class?
Code snippet follows :
<spring:bind path="filesRequest.fileEndDateSearch">
<input type="text" id="fileEndDateSearch" name="fileEndDateSearch" class="txtBox" value="<fmt:formatDate value="${status.value}" type="date" pattern="yyyy-MM-dd" />"/>
</spring:bind>
Using <fmt:formatDate> for the ${status.value} will cause an exception in case the validator fails, as the format date tag will try to parse the erroneous input.
Just in case i was not that clear in the first paragraphs, here's exactly what i'm trying to achieve: using the Spring framework i want to design a search page that submits back onto itself(with or without some search results) that takes advantage of the validator, the <spring:bind> tag (that is to say, if the user submits some erroneous data it is returned to him in the corresponding field so he can correct it) and somehow should format the data it receives from the form according to a specific format.

If you don't want the default localized version, I think you might have to do your own logic for how to display the dates.
<fmt:formatDate value="${now}" dateStyle="SHORT"/> might be close... but
with the following you can set the patterns to what you want. No automagic though :(
<fmt:formatDate value="${now}" pattern="MM-dd-yyyy"/>

Passing variables between data tag and JSP-scriptlets

Hi,
There were some questions about this issue. However, the answers were not satisfactory.
I would like to assign the value returned from data tag to a variable in JSP-scriptlets as follows:
<%@ taglib uri="/webapp/DataTags.tld" prefix="jbo" %>
<br>
<jbo:ApplicationModule id="isae.OPKv1.OPKv1Module" configname="isae.OPKv1.OPKv1Module.OPKv1ModuleLocal" username="t1" password="t1"/>
<br>

<jbo:DataSource id="ds" appid="isae.OPKv1.OPKv1Module" viewobject="AePk100View" whereclause=" <%= ic %> " />
<br>
<jbo:Row id="privRow" action="CURRENT" datasource="ds">
<%
String privName = (String) privRow.getAttribute("ArBau325"); // this is the suggestion of William Dwight (Jan 21, 2001 this forum)
%>
</jbo:Row>
This code did not work. I have obtained an error :
java.lang.ClassCastExeption
Any help would be greatly appreciated.
Thanks

The value return by the getAtribute might not be of type String. If you want to return a String value you need to convert the value using the toString method as follow:
<jbo:Row id="privRow" action="CURRENT" datasource="ds"/>
<%
String privName = "";
Object obj = privRow.getAttribute("ArBau325");
if (obj != null)
privName = obj.toString();
%>
Also note that you do not need to put the scriplet code inside the body of the row tag.
Charles.

Data Blocks and the Elapsed Time

Hi,
I have created 3 tables with one column only. As an example Table 1 below:
SQL> create table T8k( x char(2000));
So 3 tables are created in this way i.e. T8k,T16K and T4K
T8 = in the default database tablespace of 8k (11g v11.1.0.6.0 - Production) (O.S=Windows).
T16 = I created in a Tablespace with Blocksize 16k.
T4K = I created in a Tablespace with Blocksize 4k. In the same Instance.
Each table has 290,000 rows and all the 3 tables have equal size of 555MB (2006(rowsize with overhead) * 290,000/1024/1024 = 555MB) to test Elapsed Time (set timing on).
As these 3 tables are created under different block sizes so the allocated no. of data blocks are different as below:
T8K = 97177 BLOCKS= 00:41:20.21 (Elapsed Time)
T16K=41639 BLOCKS= 00:44:11.59
BT4K=293656 BLOCKS=00:37:29.06
Please note the difference. First table i.e. 8k block size, allocated blocks are 97177 and taking around 41 mins. Third table i.e. BT4K (in a 4k block size tablespace), allocated blocks(293656 ) are almost 3 times bigger, taking around 37 mins to execute the query. I mean the difference is only 4 mins hardly and blocks difference is 3 times.
In case of any doubt, I've created these tables bigger than the memory used for my db(memory_max_size 408M) i.e. 555 MB that If Blocks are already in cache then reading the blocks and counting the rows will nearly be the same regardless of the block sizes or the number of blocks.
Need solid suggestions and if possilble, links also which has some serious discussions regarding my issue.
Bundle of thanks.
Best Regards,

Because I was not completely satisfied with the things last time. It doesn't seem so simple to me as people said
I thought may some guru have a look today, not just to point out that i have created it again.
And I have compact my question to avoid confusion.

Excel data source and the use of add command

HI, Looking for suggestions on how to work with multiple inputs that cannot be joined directly. Here's the background.
The Report currently reads in two different Ecel files and uses 3 SQL commands to query an Oracle Database. I need to join the 5 data sources and am having issues with the 2 excel files. In one file I need to be able to derive a field based on another column in the file In order to create the join condition to the SQL commands. I'd equate this to a case statement in SQL, but how goes one do that using the 'add command' feature? What is the syntax?
Next I would need to join (left outer) the two excel files using two fields from file A (a1, a2) and 3 fields from file B (b1,b2,b3), where a1=b1 and b2 <= a2 <= b3 when rows from A exist in B. If row A does not exist in B then we still want it in the report and available to left outer join to the 3 oractab data sources.
runtime is also a concern.
Any Suggestions?

hi Elena,
in this case the use of subreports is not recommended. that's because you're exporting to excel and you need data in columns across the report. subreports will not, unfortunately, give you what you need.
this would bring you back to joining the datasources. what i would recommend is looking into using 'oracle database link' to link your oracle db to excel files. here's one article as an example but you may be able to find a better one. if you have questions on this please ask them on an oracle forum as the syntax that you need will be database specific.
a lot of databases have this type of technology which allows you to create a view to other data. sql server has 'linked servers', sap hana has 'smart data access'. essentially you are creating a non-materialized view to the external data. then this view is available on the main oracle server where you established this connection. this should be a lot easier than trying to bring a bunch of command objects together off independent datasources inside of crystal.
-jamie

Need JavaScript for Sharepoint Designer 2010, to show a Pop-up to all the users between date range and the redirect the site

Dear all,
I am very new to Sharepoint designer 2010. Its better to say, i am just stepping in.
I have sharepoint site which is accessible for all the users to update few information. But i want this site not to be accessible during a date range, say from 15th to 20th of every month.
I am planning to have something like this: If any user tries to access this sharepoint site between 15th to 20th date range of everymonth, then the browser must show an pop-up alert saying "This site is not accessible during this date range" and Redirect
this sharepoint site to someother site (Say http:// somesitename.xx.com) immidiately.
I know very little about how to add Javascript in sharepoint webpart.
Please provide the Javascript or any best alternate solution to my concern.
Thanks in advance.

Hi,
From your description, my understanding is that you want to redirect sharepoint site to another site between 15th and 20th every month.
I agree with what Sudip says. If you still want to use JS code,You could try these steps
below:
Open your site with SharePoint Designer.
Click Master Pages in left navigation.
Find file v4.master, and backup it(it is very important).
Right click your v4.master,
choose "Edit File in Adavance Mode".
Add the code below into the <head/> tag.
<script src="https://code.jquery.com/jquery-1.11.1.min.js" type="text/javascript"></script><script
type="text/javascript">
$(document).ready(function(){
var today = new Date();
var day = today.getDate(); // get current day
var id = _spPageContextInfo.userid; // get the id of current logon in user
var boolFlg = false;
$.ajax({
   url: _spPageContextInfo.webAbsoluteUrl + "/_api/web/SiteGroups/GetByName(\'"+"sharepoint Owners"+"\')/Users", //get users in a specified group can access the sharepoint site from 15th to 20th every
month
   type: "GET",
   headers: {"accept": "application/json;odata=verbose"},
   success: function (data) {
      if (data.d.results) {
         var src = data.d.results;
         for(var i = 0; i < src.length; i++){
            if(src[i].userid==id){ //check the logon in user in the specified group or not
               boolFlg = false;
               break;
         if(!boolFlg){
            if(day <= 20 && day >=15){
                alert("This site is not accessible during this date range"); // alert the message
                location.href = "http:// somesitename.xx.com"; // redirect to another site
   error: function (xhr) {
      alert(xhr.status + ': ' + xhr.statusText);
})</script>
Best Regards
Vincent Han
TechNet Community Support

A message will pop up (Exc in ev handl: Error: Bad NPObject as private data!) and the tab I was on will close out and reopen in a new window. Why is it happening and how do I stop it?

Okay, I will have a window open with 4 tabs open. At first, everything is fine, but after a day or so, a message will pop up on screen saying "'''Exc in ev handl: Error: Bad NPObject as private data!'''" and after you close it out, the tab you were on will close and reopen in it's own window. I then have to shut down all both old and new windows and open a new window with my original 4 tabs again. It will work fine until a few days pass and it starts over again.

This issue can be caused by the McAfee Site Advisor extension
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Jbo:Row data tag and the RowKey parameter

Similar Messages

Maybe you are looking for