JBOD 9-pin connector to SAN switch

I'm a newbie to SAN.
There are JBODs with 9-pin D-type connector. my SAN switch has fibre SFP connector. Is there a cable to connect them?

Yes. There is something called a MIA, Media Interface adapter, and it will convert copper to Fibre. Usually you plug the MIA into the back on the JBOD and attach the fibre to the MIA and the switch. Often times MIA require SC type fibre connections where as the MDS used LC type connects, just make sure you get a fibre cable that is SC on one end and LC on the other. These cables are common since most patch panels use the SC interface.

Similar Messages

IPhone dock 30-pin connector to line-out 3.5mm adapter/cable?

Hi folks,
I'm looking for a compact adaptor or cable to go from my iPhone 30-pin connector to a 3.5mm cable (or 3.5mm plug). Wondering if there are any recommendations, as some pre-date the iPhone and thus prompt the iPhone to switch to airport mode...
I've found:
SendStation - Products - PocketDock Line Mini Out USB (I don't need the USB part, but it's handy I guess)
http://www.inspiretech.com/p-483-dock-to-35-auxilary-audio-cable.aspx
IPHONE LINE OUT DOCK W/ 3.5MM JACK (WHITE COLOR) - eBay Other, Audio Cables Connectors, A V Accessories Cables, Electronics. (end time 17-Sep-09 02:25:07 AEST)
ZIP-AUDIO-IP1-B iPod/iPhone Retractable Stereo 3.5mm to iPod/iPhone Dock Connector (White), Apple Mac and iPod Accessories
There are no doubt other (maybe better?) options so look forward to any tips.
Cheers,
B

Did deeper research. It's apparently true that phone call audio is not and cannot be routed to the "line out" of the iPhone. I'm disappointed. It appears to be a hardware design thing, as I've found no app that would enable this, and darned if I can think of a situation that would have this capability as a downside.
tvengr

Is there a way to adjust the 30-pin connector output volume?

The 3.5mm headphone jack on my 1st gen touch crapped out on me. Rather than pay $150 for the out-of-warranty repairs, I spent $10 on a cable that plugs into the 30-pin connector on the bottom of the unit, and comes out as a 3.5mm jack on the other side.
The only problem now is that it seems that the iPod outputs the volume through the 30-pin connector at full, and I can't adjust it. Normally I'd play the volume on the iPod at about half and adjust the radio or whatever else to the level that was appropriate, for the best sound quality. But now because the iPod outputs the volume at maximum, the bass is distorted and tinny sounding.
Does anyone know a way that I could turn the sound that outputs through the 30-pin connector down?
Thanks!

using the 30 pin connector means it bypass the volume switch so you can't adjust the volume, see adjust the EQ setting helps. Otherwise you have to add the switch (a pre-amp etc) in between the iPod and your device

How can i use my iPad 2 as a display via the 30 pin connector ?

i want to use my ipad as a display from a range of devises like my video camer, computer and dvd player. The ipad outputs its display, so is there a way of using the 30 pin connector to input video?

Hi there,
At this time you cannot use your iPad as a display like you describe.
However, you can buy the extra Camera Connection Kit, to import video and pictures from some camera's and SD Cards.
I urge you to submit feedback to Apple:
iPad feedback
Nathan

TS2634 I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?

I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?

I have the same problem.
Two similar discussions:
https://discussions.apple.com/message/23081658#23081658
https://discussions.apple.com/message/23281391#23281391
I have not yet seen any official response to the question: "Is the Apple AV Composite cable fully supported with 30pin connector devices upgraded with iOS7 - specifically ? - eg. iPad 2, iPhone 4, iPhone 4s"
If it is not currently supported is that then due to a bug / oversight and in that case is it something that will be fixed in the near future?
Please let us know what feedback you got from asking Apple support.

Problems witch channels to the FICON SAN switches

We have some problems witch channels to the FICON SAN switches: channel 56 on Mainframe1 to switch 5B5 (FDBELF5C1_VSAN500_DISK) and channel 28 (on Mainframe1) to switch 5B7 (FDBELF5C1_VSAN510_TAPE). Forr Mainframe2 the channels are 35 to 5B5 and 37 to 5B7.
Hereby an example for switch 5B5 and channels 56 (BAD) and 43 (GOOD):
---> command: D M=DEV(5B5)
IEE174I 10.21.40 DISPLAY M 494
DEVICE 05B5 STATUS=ONLINE
CHP 56 43
ENTRY LINK ADDRESS 6543 655B
DEST LINK ADDRESS 75FE 75FE
PATH ONLINE
N YCHP PHYSICALLY ONLINE Y Y
PATH OPERATIONAL Y Y
MANAGED N N
CU NUMBER 05B5 05B5
MAXIMUM MANAGED CHPID(S) ALLOWED: 0
DESTINATION CU LOGICAL ADDRESS = 00
SCP CU ND = 0MDS9K.513.CSC.1F.00059B7ACEC4.00E0
SCP TOKEN NED = 0MDS9K.513.CSC.1F.00059B7ACEC4.0000
SCP DEVICE NED = 0MDS9K.513.CSC.1F.00059B7ACEC4.0000
When one tries to put the path online then the following error messages are seen:
---> command: VARY PATH(5B5,56),ONLINE
IEE386I PATH(05B5,56) NOT BROUGHT ONLINE
IEE763I NAME= IOSCCMSG CODE= 0000000800000032
IOS291I CONFIGURATION DATA COULD NOT BE READ ON PATH(05B5,56) RC=32
DEVICE SUPPORT CODE DETECTED INCORRECT CDR DATA
IEE763I NAME= IECVIOPM CODE= 0000000400000000
IOS554I CONFIGURATION DATA PROCESSING FAILED
IEE764I END OF IEE386I RELATED MESSAGES µ
We don't think that the problem is port related but switch related!
For the moment problems are present on only one of our 4 mainframe SAN directors. Firmware level of the directors was changed 3 weeks ago to NX-OS 4.2(7b).

Problem solved after IODF weekend.
Channels were toggled.
Rgds,
Ivy

My 30-pin dock is connected to my lightning to 30-pin connector which is connected to my iPod touch 5g. But my iPod will only charge, and will not play music through my dock.

My 30-pin dock is connected to my lightning to 30-pin connector which is connected to my iPod touch 5g. But my iPod will only charge, and will not play music through my dock, only through the iPod's internal speaker. Help please!

Have you tried resetting both the iPod and dock? To reset the iPod, press and hold the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
To reset the dock, unplug it and plug it back in.
B-rock

Lightning to 30 pin connector not charging my nano from my dock

Is it just me, or does the Apple Lightning to 30 pin connector not pass charge correctly?
I bought a new iPod Nano a few weeks ago, not realising I would be getting one of the new Lightning connector ones, so when I ordered my iPad from Apple I also bought a Lightning to 30 pin connector so that I can properly use my JBL dock (which is quite old, bought it with my old 5th Gen iPod). Although it's great that it connects and allows me to control the iPod with the remote control and is a **** of a lot neater than dangling it by a cable from the headphone jack to the RCA input on the dock, I'm getting really frustrated by the fact that I'm not getting any charge being passed through to the iPod from the dock. This was one of the best things about having a dock, not only could I play my music with a good quality sound from the speakers, I could also play it all day long without worrying about the battery consumption as it was being charged at the same time. Now, if I've been using the iPod at the gym through the week, I find that I'm having to take the iPod off the dock and charge via a wall charger or my laptop - the latter allowing me to rever to the old way of hooking the iPod to the dock via headphone jack. It's really annoying that I've spent so much money on something that doesn't do everything I'd expected of it. I'm wondering if it's faulty or if it's the age of the dock - which I haven't used with an iPod for about 5 years!
Has anyone else had this problem?

Have you tried resetting the dock by removing it from power? What about resetting the iPod Touch? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
B-rock

New iPad with retina display with 30 pin connector mirroring to TV with dvi adapter problems after software update

Hi. Good day to everyone my New iPad with retina display 30 pin connector will not mirror to TV even with divi adapter after software update. Adapter works fine. Or is it a software glitch with IOS 7.04? I've tried resetting and reconnecting nothing seems to work.

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

Dual 30-pin connector

Is there way to connect more than 1 accessory to an iPad? I've got a MIDI adapter used with an app, and I'd like to output the display from the iPad to a monitor (using the VGA adapter) at the same time.
If it's not possible to connect 2 30-pin accessories, is there another way to get the video output to a monitor that might work? Thanks!

Tried a google search. I was at least expecting something saying that it wasn't possible, but maybe my google foo isn't working well today I did see an Apple HDMI adapter with a 2nd 30 pin connector built in (for charging), but I was hoping to be able to use a VGA adapter.
It does seem like there's no dual 30 pin connector. That's why I asked about any other options - maybe a bluetooth video adapter or something.
Thanks!
Nathan

30 pin connector to vga connectivity

my 4 th generation ipod can be used with 30 pin connector to vga for display

Try http://store.apple.com/us/product/MC552ZM/B/apple-vga-adapter

I have a mac book pro and i have connected my panasonic mini dv video camera via firewire 9 to 4 pin connector but imovie doesnt recognize. please help.

I have a mac book pro and i have connected my panasonic mini dv video camera via firewire 9 to 4 pin connector but imovie doesnt recognize. please help.

Hello twrate,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iMovie '11: If iMovie doesn’t recognize your camcorder
http://support.apple.com/kb/PH2146
Best of luck,
Mario

My apple lightening to 30 pin connector doesn't play analog music

When I plug in my iphone 5 to the apple brand lightening adaptor to 30 pin connector music does not play through my speakers on my radio, it plays through the iphone speakers. It does charge if I have my 12V to USB charger converter in there, but with that converter in or out, still no analog music plays.
My 30 pin nano works just find through the speakers.
Please help!

A friend had the same complaint. I took my Apple adapter out of my car and put it in place of his and everything worked perfectly. I suggest he do as I did and go the Apple Store for the adapter rather then his third party one that while cheap has been proven to actually be worthless.
Allan

Pin connector for front headphone ja

The front headphone jack cable connection on my Dell 4600 is incompatible with my new Xtreme Gamer soundcard's male pin connection. Can anyone tell me where to find the correct female pin connector, and how do I know which leads go to which pin slots?Thanks?

more or less to adapt the here is the crude way to do it. DO AT YOUR OWN RISK. . Check to see if you have some slack from /8-/4" of an in in cable is going bye bye.2. Cut all the wires or the cable with all the colored ones in them about /2-" up the line.3. Strip exposed ends as to allow splicing on the Blue, Green, Yellow, Orange, Red, Black, and brown cables only.4. on the plug side twist together these wire colors [The should always be back to back]:?Blue and Green??Yellow and Orange5. Splice the wires together from plug piece to wires goint to front:??[Blue+Green {Step 4}] to just the Blue Wire?The Purple and Navy Blue that went into the hole next to plugged are not used trim all off plug.
[Yellow +Orange{Step 4}] to just the Yellow wire.
Brown to Brown?Black to Black?Red to Red6. Check your work: Wires not connected that lead to front of computer should be: Grey, Orange, Purple, and Navy.7. Use electrical tape to cover exposed splices area on each splice. Make sure tight at least 2 rotations.8. Use electrical tape to wrap all wires together and tightly.9. Plug the newly rewired plug into your SB Card.0. DONE.

30 pin connector to HDMI

Will the neew 30 pin connector to HDMI which allows viewing on the monitor what you see on the IPad also work with the original IPad One?

Apple's description implies that it only mirrors for the iPad2. It will allow an HDMI output for the iPad1 (and some other iDevices) just like the VGA and other "TV" out cables.
http://store.apple.com/us/product/MC953ZM/A?fnode=MTc0MjU4NjE&mco=MTc5MzExNTI#ov erview

JBOD 9-pin connector to SAN switch

Similar Messages

Maybe you are looking for