JBoss Virtual server
How to create JBoss virtual server in our PC
My OS is windows but I want to create it linux platform
Thank you
This question has almost nothing to do with DNS so stop worrying about that.
As far as the actual problem. An HTTP server, whether that's IIS or Apache or JBoss listens and responds to requests on port 80. And you cannot have more than one application/server of any type trying to listen (bind) to the same port at the same time so you have a problem.
The simplest solution (he said without actually knowing how to make JBoss specifically do this) would be to make JBoss run on a port that isn't 80. For example if you made it run on port 8888. Then you would access your JBoss application from http://mydomain.com:8888
There are other solutions but you will require an administrator to help you implement them. The two other solutions off the top of my head are as follows.
1) Using IIS as a front end redirect jsp requests to JBoss. I know that such thing is possible in Apache and I am sure that by hook or by crook such a thing would be possible in IIS although good luck figuring that out.
2) Run the JBoss on a seperate physical server. Or at least bound to a different IP address then what IIS is. If you went this route then you would use DNS to create a second host that points to the IP of the JBoss server. For example http://jboss.mydomain.com This is the only way in which DNS might be involved in your answer but you need a second IP in order to make that work.
Similar Messages
-
Iws6sp3 Configuring virtual server administrator�s user interface
Hi I am trying to configure my virtual server admininstrator interface. I followed the admin guide iws60 816-1379-01 May 2001, Chapter 13 "Using Virtual Servers" page 307. I followed all the steps however when I go to my browser, what should I type in for the URL?
Example given:
server_name:port/user-app/server_instance/virtual_server_ID
Q1. should mine will be:
http://127.0.0.1:8889/user-app/test.mytest.com/https-test.mytest.com
if I am trying out my default virtual server?
Q2. If I have created another virtual server called, esample.indoors.com will that by my vistual_server_id?
Q3. Why after adding the extra codes into my server.xml, I cannot access my default admin port which is 8888?
Below is my server.xml
<?xml version="1.0" encoding="UTF-8"?>
<!-- declare any variables to be used in the server.xml file in the ATTLIST below -->
<!DOCTYPE SERVER SYSTEM "server.dtd" [
<!ATTLIST VARS
docroot CDATA #IMPLIED
adminusers CDATA #IMPLIED
webapps_file CDATA #IMPLIED
webapps_enable CDATA #IMPLIED
accesslog CDATA #IMPLIED
user CDATA #IMPLIED
group CDATA #IMPLIED
chroot CDATA #IMPLIED
dir CDATA #IMPLIED
nice CDATA #IMPLIED
>
]>
<SERVER legacyls="ls1">
<VARS accesslog="E:/iPlanet/iws6sp3/https-admserv/logs/access"/>
<LS id="ls1" ip="0.0.0.0" port="8888" security="off" acceptorthreads="1">
<CONNECTIONGROUP id="group1" matchingip="default" servername="test.mytest.com" defaultvs="https-admserv"/>
</LS>
<MIME id="mime1" file="mime.types" />
<ACLFILE id="acl1" file="E:/iPlanet/iws6sp3/httpacl/generated.https-admserv.acl" />
<VSCLASS id="defaultclass" objectfile="obj.conf" rootobject="default" acceptlanguage="on">
<VS id="https-admserv" connections="group1" mime="mime1" urlhosts="test.mytest.com" aclids="acl1">
<VARS webapps_file="web-apps.xml" webapps_enable="on"/>
<USERDB id="default" database="default" />
</VS>
</VSCLASS>
<LS id="ls5" ip="0.0.0.0" port="8889" security="off" acceptorthreads="1" blocking="no">
<CONNECTIONGROUP id="group5" matchingip="default" servername="test.mytest.com"
defaultvs="useradmin"/>
</LS>
<VSCLASS id="userclass" objectfile="userclass.obj.conf" rootobject="default" acceptlanguage="on">
<VS id="useradmin" connections="group5" state="on" mime="mime1" urlhosts="user-app" aclids="acl1">
<VARS webapps_file="user-apps.xml" webapps_enable="on"/>
<USERDB id="default" database="default" />
</VS>
</VSCLASS>
</SERVER>Hi Chris,
thanks for your reply! Pilot Extended Listener; Pilot Listener; WWW and JBOSS are running and I started Pilot Extended Listener before Jboss, but it doesn't work.
It tries to open http://localhost/pilot/scriptmain.pw?userinfo=/pilot/pipadmin/adminstart4.htm but there isn't a file "scriptmain.pw" in the pilot directory, only the file "scriptmain.pip". Maybe it is missing?!
best regards,
Rob -
Installing on Virtual Server?
Hello,
I will be giving Adobe a call later, but I am wondering now - has anyone installed Workflow and other LiveCycle products on a Windows 2003 on a virtual server?
I installed Reader Extensions, Forms, Form Manager using the Turnkey option and then installed Workflow using turnkey and then using the turnkey option of the Configuration manager and I receive a ports conflict error at the end when it tries to restart JBoss.
Thank you,
JenniferHi
I suspect it's got nothing to do with your virtual server.
Reader Extensions installs its own version of JBoss, which is not integrated with the other installers. If you go to your NT Services, you will see two NT services:
AdobeReaderExtensions
and
JBoss for Adobe LiveCycle
You need to make sure that only one of those is running at a time, because they both use the same set of ports.
There is a document somewhere on Adobe's site for moving all the RE services into the Workflow Jboss deployment, so that everything is running in a single instance of JBoss. If you have trouble finding it, let me know, and I'll try to dig it up.
Good luck...
Howard
http://www.avoka.com -
Using adobe CC in Virtual server
Dear all
can I install Adobe CC on Virtual Server?
if yes may I know about that workflow?
regards
DetoHi John,
but I read thats allowed http://wwwimages.adobe.com/content/dam/Adobe/en/legal/licenses-terms/pdf/CC_EULA_Gen_WWCom bined-MULTI-20121017_1230.pdf
and i still confused is Server function just for reduce amount machine to installing cc program? but validating subscription still via user machine?
regards
deto -
Need to create a virtual server and give its access to another admin
Dear Sir,
I am a new admin and have 5 Blade server "HP ProLiant BL660c Gen8".
I access these servers through HP enclosure.
I have to install Hyper-V on server 1 which consisted of the OS windows server 2012 R2 Datacenter edition.
I created a plan to create 5 Hyper-V VM's on the physical server and I requested the IT department network Admin that I want these 5 VM's to able to connect to each other.
The network Admin created a Trunking configuration on the physical server and after this setup he provided me Hyper-v node IP address and 5 more IP addresses for the 5 Hyper-v VM's.
Now it was left to me to Add the Hyper-v role and create 5 VM's.
While Adding the Hyper-V role, I was asked in the middle of the setup to add the network adapter for
connecting to external network.
I went inside the network connection settings and I see one network adapter "Microsoft Multiplexer"
which had the IP address of the Hyper-V node which was given to be me by Network Admin.
Besides this I found following Network Adapter: (Mgmt,Trunk):(Mgmt A, Trunk A);(Mgmt B, Trunk B) =Total
6 Network Adapter out of which only "Mgmt" was configured with the IP address of the Hyper-v node given by my Network Admin. Remaining all other Network adapters IPV4 configuration
was unchecked except "Mgmt"
So I selected the "Mgmt" connection while Installing the Hyper-v role
SO I chose this Network connection for adding the Hyper-V role.
My question: Did I chose the correct Network Adapter.
After doing this I created a VM-1 and tried to assign the IP address given by the Network Admin. But the network Admin did not provide me the default gateway so I used the deafult gateway according to the IP address and used the last digit as "1"
like a general installation.
Now my question is: 1.How can I use this VM to be used as a Virtual server?
2. I would like to open this VM through my browser by entering the IP address of this VM-1. How can I do this?
Because I access my physical server through the IP address. SO in the similar way I want to access this VM-1 through the IP address
OR is there any alternate way to access this VM-1 separately.
My Requirement: I need to give VM-1 access to another admin to Install his application on it. SO how to give him to access this VM directly?
This is my main query.
Waiting for your reply.
Thanks & Regards,
AhmedJawin, Jacob, etc.. are fine for creating COM clients but COM servers is a totally different story. I suspect you'll either have to write your own JNI or get out your C/C++ compiler.
-
How to restart a virtual server in WS7
Does anybody know host restart a virtual server without restarting the whole instance?
Thanks.you can run 'bin/reconfig' - this will make any changes (that does not require a restart) available to the running server (this includes all virtual servers configured within this server instance) without requiring a restart - i mean without any downtime
no, there is no way to make dynamic reconfig work only for a single virtual server. but i guess, what you care most is - ability to modify a setting for a virtual server without disturbing other virtual servers - 'bin/reconfig' is probably what u r looking for. -
File system error while creating a virtual server
Hi
I get the following error when I create a virtual server:
File System Error: Could not create directory /opt/SUNWwbsvr/https-web-content (permission denied)
The admin server is owned by root but the instance that I want to create should be owned by webservd - like the other instance that is installed.
this error shows that web server is unable to create a directory under SUNWwbsvr folder. Any hints pls?
thanks!sorry this error is while creating a new server instance - not a new virtual server.
File System Error: Could not create directory /opt/SUNWwbsvr/https-web-content (permission denied) -
Error while creating virtual server in sunone web server 6.1
I created virtual server class called vs1 and virtual server called vsr1 under it. I deleted them . now while i am trying to create another virtual server class by setting lisener socket and giving it a name. when i create virtual server class and click ok and then apply to apply changes it gives me error with message:
File System error: can not open file for reading
c:/iPlanet/Servers/myservername/[email protected]
What's the solution ?
Thanks in Advance,Hi..
Thanks for your reply...
Executed following command in OVS server..Please find the output of that command..
[root@IRIMSOVM utils]# ./do_rpc.py https://oracle:[email protected]:8899 echo hello
echo ['hello'] =>
success:echo=hello
[root@IRIMSOVM utils]#
Thanks...
YJR -
Archlinux on Microsoft Virtual Server - installs but doesn't boot
Hi all,
I'm trying to sneak Arch into our organization, but as we're very Windows-focussed it may take some time. I thought I would be able to install it as a virtual machine on our Virtual Server, but I haven't had any luck.
The system seemed to install fine, but when I restart the machine and take out the virtual CD it just sits there with a blank screen, but using 97% CPU.
Here's how I installed the system:
Physical machine: Core II Duo 2GHz running Windows Vista 32-bit, with 2GB memory and a 120GB IDE drive.
1) Setup a virtual machine - it has 256MB memory, and a 100GB dynamically-expanding IDE virtual hard disk.
2) Attached the Don't Panic 2007.08 BASE ISO to the Virtual Machine, and started her up.
3) Started the installer with arch ide-legacy. This is because I've run through this install a few times now and without this option it complains that it can't read from /dev/null a lot and that it has trouble writing to VHD.
4) Did an auto-prepare and selected all of the defaults to partition the virtual hard disk.
5) Selected all of the base packages and installed them.
6) Did the "configure system", and left everything as the defaults except setting the root password.
7) Installed the kernel, again leaving the defaults in the config file.
8) Installed the bootloader. Last time I used GRUB, but it sat there saying it was installing for over 2 hours. This time I tried LILO and it installed in less than a few seconds.
After all that was done I exited the installer and did a reboot. Now it sits at 97% CPU usage constantly and shows nothing but a blank screen. Using ALT+F1-F5 shows nothing.
Microsoft Virtual Server has support for the Red Hat and other distributions so I would have expected ArchLinux to work. Has anyone else had success in getting Arch to run on Virtual Server? And is there anything I did wrong in my installation?
Cheers,
PaulWell, according to this virtual pc 2004 supports archlinux 0.7.1 and 0.7.2 .
They claim virtual server 2005 uses the same core as virtual pc 2004 , so it should work.
Try installing with one of the previous isos, see ftp://ftp.archlinux.org/iso . -
OIM Data Source Configuration in JBoss App Server
Hi experts,
I have deployed OIM on JBoss Application Server. Physical machine on which database is hosted was relocated and its IP address is also get changed.
I have made changes in xlConfig.xml to point to new DB (IP Address).
But DB connections are set in the App server Data Source as well
I made changes in Data Source as well to point to new IP address of DB machine.
Managed to start OIM .
But getting database connection exception in log. similar exception is given in post:
ERROR [DATABASE] Class/Method: tcDataBase/writeStatement encountersome prob
Thanks,
Pallavi
Edited by: Pallavi Chaudhari on Aug 10, 2011 9:47 AMYou should update it in these files,
xlconfig.xml
JBOSS/deploy/xell-ds.xml
\Oracle\xellerate\Profiles\Jboss.profile
Thanks
M -
Need help in creating virtual server
Hi
I have configured the sun ONE portal server to run on a domain p1.test.com. A default virtual server with the listen socket is existing for this virtual server. But now I need to access the portal with another domain name p1.test.co.in. I have tried creating another virtual server but it is not working. Please help me in creating the virtual server. For the "urlhost", whether I have to specify the original machine name or new domain name. Please help me in this issue.
Regards
ramHi,
Thanks for your reply. Actually I need the same content for both the url's. The DNS entries are already for the two urls's. It is getting the login page. But after giving the credentials it dosent brings the portal desktop page (seems to be going in a loop).
I have my Sun ONE LDAP server configured with the domain "test.com". Is there any changes that I have to make in the LDAP. Please help me in this issue.
Thank You.
Best Regards
ram -
Weblogic Admin Server not starting after Virtual Server move
Hi, we've migrated a VMware virtual server, and our Weblogic Admin (and managed IRM server) no longer start. The associated log files don't get updated and only the following info is present in the Command window, which I can only see if I use the /k switch, otherwise the windows shut immediately.
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~3\WLSERV~1.3\server\ext\jdbc\oracle\11g\ojdbc6dms.jar
;C:\Oracle\MIDDLE~3\patch_wls1033\profiles\default\sys_manifest_classpath\weblog
ic_patch.jar;C:\Oracle\MIDDLE~3\patch_oepe1033\profiles\default\sys_manifest_cla
sspath\weblogic_patch.jar;C:\Oracle\MIDDLE~3\patch_ocp353\profiles\default\sys_m
anifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~3\JDK160~1\lib\tools.jar;C
:\Oracle\MIDDLE~3\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~3\WLSER
V~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~3\modules\features\weblogic.serve
r.modules_10.3.3.0.jar;C:\Oracle\MIDDLE~3\WLSERV~1.3\server\lib\webservices.jar;
C:\Oracle\MIDDLE~3\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~3\modules
\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~3\ORACLE~1\soa\modules\common
s-cli-1.1.jar;C:\Oracle\MIDDLE~3\ORACLE~1\soa\modules\oracle.soa.mgmt_11.1.1\soa
-infra-mgmt.jar;C:\Oracle\MIDDLE~3\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:
\Oracle\MIDDLE~3\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~3\
WLSERV~1.3\server\lib\xqrl.jar
PATH=C:\Oracle\MIDDLE~3\patch_wls1033\profiles\default\native;C:\Oracle\MIDDLE~3
\patch_oepe1033\profiles\default\native;C:\Oracle\MIDDLE~3\patch_ocp353\profiles
\default\native;C:\Oracle\MIDDLE~3\WLSERV~1.3\server\native\win\32;C:\Oracle\MID
DLE~3\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~3\modules\ORGAPA~1.1\bin;C:\Oracle\
MIDDLE~3\JDK160~1\jre\bin;C:\Oracle\MIDDLE~3\JDK160~1\bin;C:\oraclexe\app\oracle
\product\10.2.0\server\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wb
em;C:\Program Files\Java\jdk1.6.0_20\bin;C:\Program Files\Apache Software Founda
tion\Apache2.2\modules;C:\Oracle\MIDDLE~3\WLSERV~1.3\server\native\win\32\oci920
_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~3\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThre
shold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer -
Djava.security.policy=C:\Oracle\MIDDLE~3\WLSERV~1.3\server\lib\weblogic.policy
-Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~3\WLSERV~1.3 -Dwls.home=C:\O
racle\MIDDLE~3\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~3\WLSERV~1.3\s
erver -Ddomain.home=C:\Oracle\MIDDLE~3\USER_P~1\domains\IRM_DO~1 -Dcommon.compo
nents.home=C:\Oracle\MIDDLE~3\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons
.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\Or
acle\MIDDLE~3\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.do
main.config.dir=C:\Oracle\MIDDLE~3\USER_P~1\domains\IRM_DO~1\config\FMWCON~1 -Do
racle.server.config.dir=C:\Oracle\MIDDLE~3\USER_P~1\domains\IRM_DO~1\config\FMWC
ON~1\servers\AdminServer -Doracle.security.jps.config=C:\Oracle\MIDDLE~3\USER_P~
1\domains\IRM_DO~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=
oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\Oracle\MIDDLE~3\USER_P~1\
domains\IRM_DO~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Oracle\MIDDLE~
3\USER_P~1\domains\IRM_DO~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateT
ypesDirectory=C:\Oracle\MIDDLE~3\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracl
e\MIDDLE~3\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEna
bled=false -Dirm.oracle.home=C:\Oracle\MiddlewareNew\Oracle_ECM1 -Dem.oracle.ho
me=C:\Oracle\MiddlewareNew\oracle_common -Djava.awt.headless=true -Dweblogic.man
agement.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToC
onsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~3\patch_wls1033\profiles\default\sy
sext_manifest_classpath;C:\Oracle\MIDDLE~3\patch_oepe1033\profiles\default\sysex
t_manifest_classpath;C:\Oracle\MIDDLE~3\patch_ocp353\profiles\default\sysext_man
ifest_classpath weblogic.Server
Is there another log file I could look at to get more info? None of the domain log files are updated.
ThanksThanks for the reply, this looks fine (I think)..the below is the output
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Administrator.SEALEDINFO-PROD>cd C:\Oracle\MiddlewareNew\user_projects\
domains\irm_domain\bin
C:\Oracle\MiddlewareNew\user_projects\domains\irm_domain\bin>setdomainenv.cmd
C:\Oracle\MiddlewareNew\user_projects\domains\irm_domain>java -version
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
C:\Oracle\MiddlewareNew\user_projects\domains\irm_domain>java weblogic.version
WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401
Use 'weblogic.version -verbose' to get subsystem information
Use 'weblogic.utils.Versions' to get version information for all modules
C:\Oracle\MiddlewareNew\user_projects\domains\irm_domain> -
How do I set up a virtual server with a time capsule?
I am trying to set up a wireless camera in my house to be viewed from away from the house.
I cannot seem to figure out port forwarding/virtual serving on the settings of my time capsule. I had no issues doing it with my old router. Does time capsule have that abilty?
I have Macs and PCs,I figured it out.
-
Creator2 portlet on JBoss Portal Server 2.2
Has anyone managed to get a JSF Portlet created with Creator2 to run on JBoss Portal server 2.2? I've found documents on getting Creator2 to work with JBoss AS, but not JBoss Portal.
JBoss Portal Server uses MyFaces and I would like to keep for example the JBoss CMS portlet and add custom portlets created by Creator2 (so some portlets would use MyFaces and some would use RI).
Thanks for any pointers,
LloydApparently JBoss is using MyFaces for some of their portlets. From what I can tell, I could replace the MyFaces jars with RI jars, which might work, but would cause all the JBoss portlets that are distributed (or at least the admin) portlet to not work.
In short, you can use RI with JBoss portal, but then some/all of the JBoss portlets may not work.
Lloyd -
Oracle datasource lookup in JBOSS application server
Hi friends
i have the below problem while configuring the datasource in JBOSS for oracle pls any body can help me out..........
i just want to create a data source for oracle in JBOSS 3.2.5 application server and i want to access that datasource from my session bean while accessing it cant finding the JNDI name of the datasource my oracle-ds.xml code is like as below
<local-tx-datasources>
<jndi-name>java:OracleDS</jndi-name>
<use-java-context>false</use-java-context>
<connection-url>jdbc:oracle:thin:@localhost:1521:EPS</connection-url>
<driver-class>oracle.jdbc.driver.OracleDriver</driver-class>
<user-name>system</user-name>
manager
</local-tx-datasources> my session bean method is like as below
public void businessMethod1(){
try{
javax.naming.Context ctx = new javax.naming.InitialContext();
javax.sql.DataSource ds = (javax.sql.DataSource) ctx.lookup("OracleDS");
java.sql.Connection con = ds.getConnection();
java.sql.PreparedStatement ps = con.prepareStatement("select * from employee");
java.sql.ResultSet rs = ps.executeQuery();
while(rs.next()){
System.out.println("Employee ID "+rs.getInt("empid")+"Employee Name "+rs.getString("ename")+"Employee Designation "+rs.getString("designation"));
}catch(Exception e){
e.printStackTrace();
} but the error i am getting wasl like as below
14:14:14,039 INFO [Http11Protocol] Starting Coyote HTTP/1.1 on http-0.0.0.0-8080
14:14:14,164 INFO [ChannelSocket] JK2: ajp13 listening on /0.0.0.0:8009
14:14:14,164 INFO [JkMain] Jk running ID=0 time=0/47 config=null
14:15:00,883 INFO [STDOUT] javax.naming.NameNotFoundException: OracleDS not bound
14:15:00,883 INFO [STDOUT] at org.jnp.server.NamingServer.getBinding(NamingServer.java:495)
14:15:00,883 INFO [STDOUT] at org.jnp.server.NamingServer.getBinding(NamingServer.java:503)
14:15:00,883 INFO [STDOUT] at org.jnp.server.NamingServer.getObject(NamingServer.java:509)
14:15:00,883 INFO [STDOUT] at org.jnp.server.NamingServer.lookup(NamingServer.java:282)
14:15:00,883 INFO [STDOUT] at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:530)
14:15:00,883 INFO [STDOUT] at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:509)
14:15:00,883 INFO [STDOUT] at javax.naming.InitialContext.lookup(InitialContext.java:347)
14:15:00,883 INFO [STDOUT] at com.ness.training.ejb.FirstSessionBean.businessMethod1(FirstSessionBean.java:13)
14:15:00,883 INFO [STDOUT] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
14:15:00,883 INFO [STDOUT] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
14:15:00,883 INFO [STDOUT] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
14:15:00,883 INFO [STDOUT] at java.lang.reflect.Method.invoke(Method.java:324)
14:15:00,883 INFO [STDOUT] at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.j
ava:683)
14:15:00,883 INFO [STDOUT] at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterce
ptor.java:185)
14:15:00,883 INFO [STDOUT] at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterc
eptor.java:72)
14:15:00,883 INFO [STDOUT] at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:84)
14:15:00,883 INFO [STDOUT] at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:315)
14:15:00,883 INFO [STDOUT] at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:148)
14:15:00,883 INFO [STDOUT] at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:120)
14:15:00,883 INFO [STDOUT] at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:191)
14:15:00,883 INFO [STDOUT] at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:1
22)
14:15:00,883 INFO [STDOUT] at org.jboss.ejb.StatelessSessionContainer.internalInvoke(StatelessSessionContainer.java:331)
14:15:00,883 INFO [STDOUT] at org.jboss.ejb.Container.invoke(Container.java:723)
14:15:00,883 INFO [STDOUT] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
14:15:00,883 INFO [STDOUT] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
14:15:00,883 INFO [STDOUT] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
14:15:00,883 INFO [STDOUT] at java.lang.reflect.Method.invoke(Method.java:324)
14:15:00,883 INFO [STDOUT] at org.jboss.mx.server.ReflectedDispatcher.dispatch(ReflectedDispatcher.java:60)
14:15:00,883 INFO [STDOUT] at org.jboss.mx.server.Invocation.dispatch(Invocation.java:61)
14:15:00,883 INFO [STDOUT] at org.jboss.mx.server.Invocation.dispatch(Invocation.java:53)
14:15:00,883 INFO [STDOUT] at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
14:15:00,883 INFO [STDOUT] at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:185)
14:15:00,883 INFO [STDOUT] at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:473)
14:15:00,883 INFO [STDOUT] at org.jboss.invocation.jrmp.server.JRMPInvoker.invoke(JRMPInvoker.java:360)
14:15:00,883 INFO [STDOUT] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
14:15:00,883 INFO [STDOUT] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
14:15:00,883 INFO [STDOUT] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
14:15:00,883 INFO [STDOUT] at java.lang.reflect.Method.invoke(Method.java:324)
14:15:00,883 INFO [STDOUT] at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:261)
14:15:00,883 INFO [STDOUT] at sun.rmi.transport.Transport$1.run(Transport.java:148)
14:15:00,883 INFO [STDOUT] at java.security.AccessController.doPrivileged(Native Method)
14:15:00,883 INFO [STDOUT] at sun.rmi.transport.Transport.serviceCall(Transport.java:144)
14:15:00,883 INFO [STDOUT] at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:460)
14:15:00,883 INFO [STDOUT] at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:701)
14:15:00,883 INFO [STDOUT] at java.lang.Thread.run(Thread.java:536)make the changes like this.
javax.sql.DataSource ds = (javax.sql.DataSource) ctx.lookup("java:/OracleDS");
Regards
vanan
Maybe you are looking for
-
Atan in jdk1.1.8 doesn't work. help
I am creating a program which simulate the effect of gravity on a object (for a game). For this I am working with jdk1.1.8. (not by choice). But for some reason the movement of the object just turns around. I believed that de method Math.atan2 was wr
-
Hp 3522 will not print in black
hp 3522 will not print in black - has all new cartridges - replaced black for dim printing and now none at all - retried original cartridge - all hp original cart's. Tried every hp online help's - none worked - out of warrentry as on mar this year.
-
Wrong default resource bundle is retrieved, anyone?
Hi, i have defined resource bundle files for localizing purpose, which i define: localization.properties localization_da.properties (danish language) localization_sv.properties (swedish language) By default for all other languages than danish & swedi
-
Auto correct capitalization of first letter in sentence in Mail?
I was used to Mt. Lion auto correcting my first letter in my sentences in Mail and now it does not. The same is true for smaller case "i". Sounds like both are not working in Mavericks Mail. Hope this will get corrected (pun intended) in the next
-
Consideration of SGL payments in APP
I have paid an advance through SGL A. And i have invoices for the same vendor. While executing APP it has not considered the SGL A document System should consider in APP the net amount (Invoice-SGL Payment) What is the procedure to consider SGL tra