Jbuilder 6 of 7 and windows 98 sec edition

i have jbuilder 6 or 7 and i like it to install it on windows98 platform.
The installation is not impossibel. Pleas,can sombody help me.
Sorry for my Englisch, I am a dutch boy who learnig Java and Englisch
IVO
tx

when i install jbuilder you see the index just to 100 and then it stopped.
Normaly juo must see a install screen, but the install stopped wothaout a errormessage.
tx

Similar Messages

10.4.11, VMware Fusion and Windows XP (Home Edition) works just fine

OK, so I'm through the installation of VMware Fusion and Windows XP (Home Edition) and I have to say that it was pretty much point and click as advertised. All network services seem to be working and I'm running both OS side-by-side with out a hitch.
Haven't put the system through any rigorous test yet, like VPN, network printing or rending large graphic files, but the installation, setup and normal operation went smoothly taking about an hour in total.
Machine: MacBook Pro, 1.8Ghz with 1G of RAM memory and dual monitors.
Host OS: MacOS 10.4.11

I now have installed XP Pro into a Boot Camp Partition. Basically point and shoot. Then while booted in XP I used PC Mover to migrate my old PC to the Boot Camp partition. With the exception of one program and my virus and firewall programs all went well, almost point and shoot. Then I installed VMWares Fusion and used my Boot Camp partition as the source. If you follow instructions from VMWare things work relatively problem free.
After posting questions on VMwares site about processing video and compiling DVDs in Windows using Fusion I decided that such processor intensive requirements are best handled in the Boot Camp (native) mode.
The biggest problem I have encountered is that Microsoft Office constantly asks to be reactivated when switching between Boot Camp startup and Fusion. No solution I know of, except not to use Office in Boot Camp Mode. Secondly XP Pro required a re-authorization from Microsoft so I could run it in both Boot Camp and Fusion modes. Obtaining the authorization (activation code) from Microsoft was not a problem.

Itunes 7.1.1. and Windows Vista Home Edition

Hi there. I have a new PC from HP model T3765.it and I am NOT able to use my iPod nor to install iTunes for more than two months: my PC says "you have to repair iTunes to make it working with Windows Vista". I followed the instructions (Control Panel --> Programs --> iTunes --> repair) but no result. My PC has Windows Vista Home Edition. Does anyone know what to do? Is there a way to sort this out or do I have to wait for a new iTunes release?
Thanks, Giacomo

Can anyone help me with instructions to restore the Ipod to a back level? I have searched the discussions but haven't found a method. I have downloaded 1.2.1 but Itunes wants to check for an update and won't let me get past that point.

Problem with PC Suite and Windows 7 Home Edition 64-bit

I installed PC Suite on my desktop with Windows 7 Home Edition 64-bit installed. I was able to eventually run PC Suite (granted it needed to run in XP SP2 compatibility mode) and sync my calendar on my W518a cell phone with PC Suite via Bluetooth communications. After I turned off my computer and restarted it, I could no longer open up PC Suite...its icon appears in my system tray with a red X over it as if it can't find the program.
The SonyEricsson website indicates PC Suite can run with Windows 7.
What is causing the problem I am having? How do I get this corrected?

I have downloaded and reinstalled the PC Suite software. Although it is not working as well as it should, as long as I have my cell phone on with Bluetooth enabled prior to clicking on the icon to open the application, it seems to work OK. Otherwise, when it opens, it just hangs and the only way you can close the program is to get into Task Manager and force it closed when its status is showing as "Not Responding". I also have found that just "closing" the PC Suite window does not close the application...you have to click on the option to "Exit the Application" otherwise you continue to have it in your system tray with a red X over the icon.

PC Netlink 2.0 and Windows 2003 Standard Edition

Does anyone know if a Windows 2003 Standard Edition Server can be added as a Domain Member Server to a PC Netlink 2.0 domain?
When I try to join the domain I receive the message;
"The following error occurred attempting to join the domain "DomainName":<br />
<br />
The remote procedure call failed and did not execute."
Thanks
Peter

I have the same Problem; no solution yet.
Accroding to Sun Support Doc # 72542.
PC Netlink is based on NT 4.0 Server.
At the highest level it implements NT 4.0 protocols.
.NET clients, such as Windows 2003, implement a different protocol.

Office 2013 and Windows 7 Starter Edition

Can you tell me if Office 2013 purchase via a HUP licence will work on a minibook with Windows 7 Starter Edition installed?

Hi,
Office 2013 is supported on Windows 7 Starter Edition, for more information about the System requirements for Office 2013, please refer to this article below:
http://technet.microsoft.com/en-us/library/ee624351(v=office.15).aspx
Regards,
Melon Chen
TechNet Community Support

Boot Camp and Windows Media Centre Edition?

Just curious ... has anyone tried installing Windows Media Centre Edition with Boot Camp on their MacBook Pro? If so, how did it work out? Any issues?

Look here: http://discussions.apple.com/thread.jspa?messageID=2090789??
In general, I'd say the Boot Camp forum is a better place to work on Boot Camp issues than in the model-specific ones.
Also, searching first is always recommended. In most cases, a person coming to these forums with a question or an issue is not the first one. With one exception, of course…
Randall Schulz
iMac 20" Core Duo; MacBook Pro Mac OS X (10.4.6)

Personal Oracle and Windows XP Home Edition

Has anyone gotten any version of Personal Oracle
to run on Windows XP Home edition?
How?
I have Personal Oracle 8.1.7 for Win 98 running on
Windows Me, but now I need Personal Oracle running
on Windows XP Home edition.

I was told by Oracle Sales that XP home is not supported, just XP Pro

PCI 16 and Windows XP Home edit

I have a dual boot computer -- XP and the Linspire version of Debian Linux. The sound card works under Linux but does not work under XP.
The system would not recognize my CD-ROM dri've in XP because of a software problem which needed two changes to the Registry to fix. See MS Knowledge Base #34060.
http://support.microsoft.com/default.aspx?scid=kb;en-us;34060
I may have a similar software problem with my SoundBlaster 6 PCI because System Properties / Hardware says that the PCI 6 is working properly but "Control Panel" / "Sounds and Audio Devices Properties" / "Volume" tab says "No Audio Device" and the "Audio" tab says "No Playback Devices". The "Hardware" tab shows various codecs and drivers and the SB PCI WDM card as "working properly"
I tried your Knowledge Base #72 "clean sweep" but that did not fix it, perhaps because the installation CD-ROM with my card [copyright 2003. part number 320ML000043} did not have a file CTZAPXX.EXE so I could not kill the WDM drivers with it.
I also tried Li'veDrvUni-Pack(ENG).exe but it said it could not find any "Creative" sound cards so it did not run.
XP System Information / Sound Devices says that the sound device is SB PCI (WDM) made by Creative Technology Ltd.
Oh mighty tech gurus, where in the hell is the problem?

Johnb662,
There may be a problem with the multimedia section of Windows XP. This typically means uninstalling and reinstalling the multimedia section of Windows XP. This is usually hidden in XP but if you follow some steps you will be able to make this section visible. These steps are described in the following article in the section labeled "How to install or uninstall Windows programs that are no listed in Add/Remove Programs Wizard".
http://us.creative.com/support/kb/ar...p?l=2&sid=5339
Make sure you have a Windows XP CD or the install files are on your HDD before continuing. Once this is done you can go to Add Remove Programs/Add Remove Windows Components and select the accessories and utilities section. Take the check mark out of Multimedia and hit apply. It will uninstall and you will need to reboot your system. After the reboot, go back to the same place and return the checkmark to Multimedia. Hit apply and reboot again. See if the sound card shows up after that.
Jeremy

Flash Player 9 and Windows Tablet PC Edition

Has the player been tested against Windows Tablet PC 2005
Edition. Comparing it to Flash Player 7, the player seems very
buggy with text input focus and click recognition. Any
insight?

Well ,have to see for few days .I also don't experience any
glithches yet. Hope we are all lucky for player 9 and IE7.

Authorware 7 and Windows XP Tablet Edition

Greetings
I'm probably going to buy a Fujitsu Tablet PC; it runs the
Tablet Edition of XP.
I want to load Authorware 7 (and Camtasia) on the Fujitsu to
record full motion pen-strokes at the speed in which I write and
create an e-learning Math tutorial.
Will Authorware 7 (and Camtasia) run on a Tablet PC under the
Table Edition of XP? I vaguely recall reading something about
problems that Authorware 7 and Camtasia have running under
the Tablet Edition of XP.
Thanks

I would suggest that if you want a tablet for Authorware you
get a Toshiba
M200 series, because it has a much higher resolution screen
and more
available RAM. You need to have a large work area if you're
working with AW
7 because of the way they've changed the interface. Make sure
you buy 2
extra power supplies when you buy it, because the end of the
power supply
where it plugs into the laptop is weak. Invest in the
extended warranty in
case your screen cracks
Have no idea about camtasia on a tablet, but I'd think it
would work. It's
just a mouse move and pixel change.
HTH;
Amy
"Pqstr" <[email protected]> wrote in message
news:ed9o8m$cak$[email protected]..
> Greetings
>
> I'm probably going to buy a Fujitsu Tablet PC; it runs
the Tablet Edition
> of
> XP.
> I want to load Authorware 7 (and Camtasia) on the
Fujitsu to record full
> motion pen-strokes at the speed in which I write and
create an e-learning
> Math
> tutorial.
> Will Authorware 7 (and Camtasia) run on a Tablet PC
under the Table
> Edition of
> XP? I vaguely recall reading something about
> problems that Authorware 7 and Camtasia have running
under the Tablet
> Edition
> of XP.
> Thanks
>
>
>

ODI 10.1.3.4 and Windows 7 compatability

Is there an issue with ODI 10.1.3.4 and Windows 7?
Edited by: dalew7777 on Sep 13, 2010 10:39 AM

OK, figured out the compatability issue. Just had to add Windows 6.1 to the oraparam.ini file and I was able to install the application on a Windows 7 box.
Now I am getting an error when trying to create the connection. It says that the login already exists. Well of course it exists...I am just trying to create this connection string on this other pc. The connection string I am trying to create on the machine was already created on another machine and I am just trying to use this same one on the Windows 7 box. This connection tested OK I just need to save it on the new machine. Anyone know what I am doing wrong here?

Problem with syncing iPod ... Itunes and windows show errors... itunes 7...

hey guys... since I upgraded to itunes7 my ipod (4th gen click wheel) doesnt sync poperly! it all began when I was syncing the ipod and my screen just froze a few secs after connecing the ipod! I had to restart the computer and reset my ipod... from that time had alot of trouble!
first the screen froze immediately when I connected my ipod with the pc and later when i had formatted it with windows several times and resetted it a million times with itunes7, itunes and windows show errors (error (-124) while syncing and everything stops! I've just spent nearly two nights on that and really hope that my ipod didn't break just because of itunes7! to stay in proper english and not get that angry in letters that I am in mind--- please so help me... my ipod is everything and im a music junkey! by the way... itunes itself works perfectly... if i not sync! how peculiar that getting back to itunes6 is impossible...i tried it... does it hav a spec reason, hah!
IBM, Pentium3 (666MHZ), FW(desire to fire), Ipod Click Wheel Windows XP 30cm

I tried formatting the ipod with windows! in the end of it windows says that it was not able to format the drive properly. then I click ok, open itunes, restore the ipod, try to sync again and have the problem that after a while the whole thing freezes... no more errors....just from the moment i disconnect the ipod manually from the cable, everything gets back to normal life again! I do not know what to do! do you guys think, my computer is too old or maybe my ipod's broke???
I'm despairing people...never had problems like that until itunes7! I tried as well to close all the other working programs with the task manager... doesn't change it!
Thx for the help!
Christopher
IBM, Pentium3, FW(desire to fire?)...doesn't really matter Windows XP

Screen sharing performanace differences on MAC and WINDOWS

Hi All
I am having a big issue of screen share latency (working on WINDOWS) which is about to 20 - 30 sec sometime and 10 - 15 sec in general. I was thinking that It could be because of my network limits but when on the same time and in the same network I publish my screen share from MAC, miracle is happening, there is unexpected difference and there is no latency and if there, it is sometimes about 2-3 sec hardly. My maximum users are using WINDOWS and so that I am searching a solution for this latency problem. Please suggest a solution.
Thanks.

Hi Raff,
We have tested it on following combinations on port 443 , sending and receiving.
1. Screen sharing on MAC machine on LAN (Result: Good speed of sharing)
2. Screen sharing on MAC machine on WiFi (Result: Good speed of sharing)
3 Screen sharing on Windows machine on LAN (Result: Too much Latency in receiving)
4 Screen sharing on Windows machine on WiFi (Result: Too much Latency in receiving)
Specially we have noted on windows that after some time , data from windows machine (Any windows machine) screensharing addin process stop sending any significant upstream data(used netlimiter to verify this) , so reciver receives almost nothing or very delayed screen updates.
I tried to figure out using Wireshark , but not sure that which packet to look for which can cause issues.I do not see any dropped packets atleast in packet scan.But packet sending speed decreases after some time on Windows machine.
We use same settings of performance ,Quality ,Fps and Keyframes on Windows and MAC while sharing screen.
What to look in for wireshark.
Your inputs will be very helpfull.

My macbook air (version 10.9.4) display flickers, has random tabs and windows opening, and there are random ads almost everywhere. All this happens when I am using safari. What can I do?

My macbook air (version 10.9.4) display flickers, has random tabs and windows opening, and there are random ads almost everywhere. All this happens when I am using safari. What can I do?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};/r:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Jbuilder 6 of 7 and windows 98 sec edition

Similar Messages

Maybe you are looking for