JCA and connection with mainframe
hi all,
we were trying to do a simple proof of concept of connecting java and mainframes through JCA.We searched for examples and couldn't find out any.If there is anyone who has done a simple application connecting java and mainframes could send me the code it would be of much help.my mail id is [email protected]
thanks and regards,
Manivannan
Sorry, no code here. But I was curious about your question and how 'real' this capablity was for accessing legacy applications running on the mainframe. I googled on:
jca mainframe example
and found lots of hits (of course) and many good articles. One of the most complete articles with example code was here:
http://www-106.ibm.com/developerworks/java/library/j-jca/
Similar Messages
-
Can someone connect in FaceTime if they are using a friends Macbook Pro, yet, doens't have an Apple ID?? For example, I have an IPAD and a Macbook Pro. Can I connect to FaceTime on my Macbook Pro and connect with a friend using my IPAD????
I have also tried changing the contact emails(you can contact me by) in Facetime(diff email for IPAD and Macbook Pro). Facetime tried the call, I see the accept buttom appear and it goes away as the call never connects? Any ideas??
-
i am trying to connect my mac and PC through my network. the pc can seen and connect with the mac, but my mac can only see the pc it can't connect. how do i fix this?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost -
Even though there are over 200 photos on my ipad, after trying both methods of importing and connecting with a lead, a message appears saying that there are no photos on this device. Any ideas?
Did you connect your iPad to your computer then open the application on your computer that transfers photos from a camera? Your computer should recognize the iPad as a camera. All photos in the Camera Roll on the iPad should then be seen and you should be able to copy them to the computer using that application.
Photos that were synced to your iPad by connecting to your syncing computer cannot be copied back this way as the master file for those photos are on the syncing computer. -
Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?
Solution may be found if you search in the "More Like This" section over in the right column.
-
Using a dongle and connecting with an Xbox 360...
Hi guys,
Quick question, i've moved into my new uni place but it hasn't got any internet. So im looking at getting a dongle but I still want to hook up my xbox to xbox live. Is there a way of feeding the internet through my imac (which is using the dongle) to the xbox. If its any help i do have the extra wireless box for the xbox and also an either-net cable.
Thanks!You X-Box can connect to the internet thru the Mac using either wifi or ethernet, whichever works best for you.
If you want Ethernet, connect a cable between them
If you want wifi, you need to first create a network.
System prefs -> Network.
Select Airport then click on Network name: and select *Create network...*.
Give it a name, tick require password.
Now go System prefs -> Sharing.
Click on *Internet Sharing*.
Set *Share your connection from:* and select the dongle (likely showing up as USB).
If you connect them using Ethernet, set *To computers using:* and select Ethernet.
If you connect them using wifi, set *To computers using:* and select Wifi.
You will need to enable wifi on the X-Box and connect with the password you set above. -
im not able to connect to app store with my apple id after i trying to logout and connect with another id. Please help.
The app store has been down for over 8 hours. The following can be used to check on its current status: https://www.apple.com/support/systemstatus/
-
My MBP 9,2 (2.9GHz i7/8GB/750HDD) no longer recognizes my 3rd Gen Apple TV while my wife's MBP 8,1 (2.3GHz/4GB/320HDD) recognizes and connects with no issues. All are running current software.
Hello herbnmyth,
Thank you for using Apple Support Communities.
I see that you are having difficulties with connecting the Apple TV with your computer. The following article provides information for troubleshooting Home Sharing and should help you sort the connections.
Troubleshooting Home Sharing - Apple Support
Regards,
Jeff D. -
We use one windows machine and two mbp's (post 2012) at home. We have a modem *** router from a non apple vendor that airport utility finds and connects with absolute ease. But doesn't stay connected. The signal drops often, what can I do?
No, not all network clients -- only the two mac portables and they run together very rarely. The windows machine is hardwired to the modem router combo, and that's always sailing smooth. The mbp that is most used is perhaps 20 feet max from the router - and in another room. But it also happens when I take in into the same room as the router. On occassion, I have noticed while using network diagnostics, that one digit in the IP number sometimes appears to go awry. I then try to set up manually - and it works for a bit but is hugely erratic.
I rigged a hand me down airport express and set up a separate network for the two macs and it ran beautifully for some weeks, but that little piece is now dead and none of the retailers in my suburb seem to have one in stock. I don't want to be forced to buy an airport extreme and here in India, there's no trustworthy online ordering option.
The man from the ISP's been here several times and I don;t think it is a modem/dsl issue because the smartphone connects and the macbook drops when both are the same distance from the router? I am truly foxed and intensely irritated! :-( -
I registered a digital copy of a movie on disneymoviesanywhere. I connected the account to my itunes account but I can't find the movie on my itunes account. I'm just trying to download the movie onto my ipod touch.
Hey cptniemo,
Thanks for the question. Connecting your iTunes Store and Disney Movies Anywhere accounts should sync all of your eligible Disney, Pixar, and Marvel movies between both services. After connecting your accounts, you can check your purchased history in the iTunes Store:
Download past purchases
http://support.apple.com/kb/HT2519
Alternatively you can download the free Disney Movies Anywhere app from the App Store (iOS 7 required):
https://itunes.apple.com/us/app/disney-movies-anywhere-watch/id766894692?mt=8&uo =4
For more information and support with Disney Movies Anywhere, see this resource:
About Disney Movies Anywhere and iTunes Store
http://support.apple.com/kb/HT6129
Thanks,
Matt M. -
Creating a share in 10.5 and connecting with XP or Vista - My Experience
Here was my situation.
Client has a machine now running 10.5 on it that is sharing an external drive on the network for other mac users in the office to use as well as 3 Windows machines. I tested with an xp machine as well as a vista machine.
The problem I was facing was that I had to set up the windows machines to be able to access the shared drive on the machine running 10.5. On 10.4 this was done with sharepoints, which breaks in 10.5. Luckily, Apple incorporated a lot of sharepoints functions into 10.5.
First I had to create a Standard or Admin user for each unique user that will be connecting to the share, on the machine that the external drive is connected to. You have the option of creating a "share only" user, but that seems to only be for mac sharing because those accounts do not show up as available when you enable accounts to access the SMB.
Once I had the new accounts made, I had to go to "Sharing" in the System Preferences and click on "File Sharing". When selected you see "Shared Folders" and "Users" panes. I clicked the + symbol and pointed it to the shared drive, since one of the accounts will have access to the whole drive. In the user pane I clicked the + and added the user I created for that access.
Note at this point. If you use the same username and password of the user account in windows (case sensitive I believe) you will not have to specify a special username and password for access to the share. I did this with the first machine with complete access because he was the owner of the share.
So after I gave that user access to the whole drive he was able to find the 10.5 machine on the network and connect to the share without prompt of a password.
I then tried to set up the other two users who were not on the same subnet so they had to use "map network drive" on their PCs.
Again I added the target folder that they would have access to on the shared drive. I added their user as having permission to access it. But when I went to map the network drive, it could see the folder if I entered \\ip.add.res.s\foldername and clicked "browse" but when I tried to add it, the system said it was not found. I also made sure to click "change user name" and entered the username and password for the account with access to the folder.
So after tinkering a while I finally found that you must add the users to the main share drive list of users, even if they are set to "read only (dropbox)" or else they will not be able to access the subfolder assigned to them. It also did not make a difference if I removed the share drive completely and added just the subfolders and users individually.
I hope this might help somone out there who might be having a similar issue with getting xp or vista to use shared folders in 10.5.Was not a question.
-
DI Server installation and connection with PHP
hello,
We've installed DI Server, started it, but the WSClient file comming with the installation doesn't work.
a) Is the IIS needed for the DIServer to work?
If not, what do I need to do to be able to connect to the DIServer. There's no WSDL file with the DIServer.
b) Do I need to create my own WSDL file and put it on a Web folder?
I say this because I'm trying to connect with PHP to the server and PEARClient from PHP needs an URL (normally the WSDL file) to connect. It's just too confusing and there is no much help in the documentation.
thanks and greetings,
Guillem Barnolas.
www.softime.esDI server provides you a simple COM interface that
accepts SOAP commands and returns you SOAP reply.
The format of these SOAP messages is in the SDK
documentation.
You should build your own web infrastructure on
top of this mechanism. -
How do I network and connect with AirPort?
OK here is what is happening
through a Wired connection to my router i get to the internet fine
on ALL 5 of my computers
my MAC Mini and one Linux Laptop have wireless capeabilities and my Router is both Wired and Wireless
5 computers..............4 wired ports
So i now have a choice of haveing one pc pick up the internet wirelessly
either the Linux Laptop or the Mac Mini or Both
I come to this forum to ask how to configure the MAC Mini
I tried turning AirPort on but the MAC only sees the internet when i conect the Cat 5 cable to the 10/100 Ethernet slot
I also want to SHARE the connection with other PCS
here is my list of PCS
PC1--Mac Mini
PC2--Fedora Core 5 Linux Laptop
PC3--Fedora Core 5 Linux Desktop
PC4--Madriva 2006 Linux Desktop
PC 5--Windows ME Desktop
only PC 1 and PC 2 are capable of wireless
the Router is also wireless with 4 wired ports
(wireless G D-Link DI 624)
i am on Verizon Fios @ 15g so there is no modem nec.I tried turning AirPort on but the MAC only sees the internet when i conect the Cat 5 cable to the 10/100 Ethernet slot
Verify that AirPort is at the top of the connection list.
System Preferences > Network > Show > Network Port Configurations
I also want to SHARE the connection with other PCS
here is my list of PCS
For the devices that don't have wireless capability, just plug them into the router's available LAN ports. Those with can all share the router's wireless feature. -
Every time my imac sleeps or restarts it loses the wireless connection with my airport express (used for streaming music). I then have to disconnect the airport express from my stereo, bring it to my router, connect it to my router with ethernet cable and reset the wireless connection. Even with my airport express in the same room as my router Airport Utility cannot find it until i plug in an ethernet cable, so i do not think this is an issue with my wireless network. Router is a newer netgear.
Hi there frustrated newbie 2014,
You may find the troubleshooting steps in the article below helpful.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
-Griff W. -
How to use time capsule as hard drive and connect with existing net gear router
I have a netgear D6300 router, which i use to connect to internet - which is excellent so far for my downloads and games etc for my PS4 and hence am keen to continue using it. I bought the Airport time capsule for wireless storage, and when i set it up, I was advised on setup to connect the TC to my router, and it did what it needed to do.
Now, in order to connect to internet, i need to connect wifi to net gear router, but to access time capsule, i need to change wifi connection to my newly created wifi network with TC.
I want to use TC as a backup storage for my mac (its a 3TB TC), but also, my laptop has only 500gb hard drive which is now half full from downloads, so i want to transfer all my downloads to my TC and use it as an external hard drive, and future downloads to TC - but when i connect to wifi of TC, i can copy my folder on my mac, but not paste it to TC in finder. (the only thing in TC is an image of tmg of my macbook from first backup.).
How do i use TC as an external HD - there wasn't much difference in price of external wifi/wireless HD between non-TC and TC at 3gb, so i just thought i'd go for the airport TC option.
And is it possible to keep connected to wifi internet via net gear router, AND wifi TC - the whole point i bought it (from US shipped to australia on eBay, therefore not able to send back) was to use TC as external large HD via wifi, but keep my net gear router going.
Surely there is a way to not having to flick between wifi connections of TC and net gear internet.
When i'm connected to TC, i can't access internet, only TC.
And I don't really want to connect TC to my router via ethernet cable, as too many cables.
This can't be a difficult situation to manage, but i'm not sure how to do it.
ThanksAnd I don't really want to connect TC to my router via ethernet cable, as too many cables.
Sorry but you have very little choice.
The TC can join to a wireless network.. but it is flakey, poor, slow and highly NOT recommended way to do things.
Nevertheless if you want to give it a try .. here is the method.
How do I setup my time capsule with wireless internet?
You SHOULD, plug the TC into the Netgear and run it in bridge mode.. you set the wireless to create a wireless network.. then when you connect to the TC it will be also connected to the internet and fast.
(if you don't do that you may as well have used a USB drive plugged into the Netgear, as it would be just as good).
TC is not actually designed for mixing Time Machine backups and files.. but if you are just storing downloads that is ok.. but I strongly recommend you use a DMG or sparsebundle to prevent the TM and the data from messing each other.
See Pondini instructions here.
Q http://pondini.org/TM/Time_Capsule.html
Maybe you are looking for
-
I'm still running OS X Tiger and iTunes 9, and I own an iPhone 3GS. I recently downloaded REMOTE to see how it works, but I'm having problems getting them to work together. When I try to add my DJ library as a guest, it says it can't connect to it an
-
Final Cut Pro 7 stretches video footage
This question is for Final Cut Pro 7 and, as I was informed, has been posted in the wrong place. However I am unable to move the thread. I apologize for any confusion. I have video footage that is 853x480, which is a slightly odd dimension. When I im
-
Hi All, Can any one pl. explain me this! How can we generate Global Employee ID's?, and how can we assign our Employees to the Global Employee ID? Regards, Sushma.
-
What? I can't Highlight and Copy from Webpages???
Why can't I highlight, copy text from webpages? If I find a URL I want to visit on a page but doesn't have a hyperlink, I want to select it and put it into the URL command line yet I can't even select the text...okay, how about typing it directly to
-
Adding a panel over other components in the main mxml application
Hi, I've created a main mxml file that contains,among other things, a button, and another mxml that contains a panel with some options. I want to be able to add that panel to the main mxml OVER all other components in the main mxml file with a mouse