JCAPS 5.1.3 backup project files

I'd like to schedule daily backup of my repository. Where are located project data? Which directory should I backup? Is it repository/objects?

Hi,
I noticed this behavior with the Alert + SNMP Agents installed but not configured. In this situation, the SNMP agent generates traps for all events, leading to high CPU using, even when nothing was processed. Are you in a similar case?
Regards

Similar Messages

  • File Corrupted? Import Backup Project file?

    I have a project in Final Cut X, and both the event and the project folders are on an external HD.
    My mac crashed while working in Final Cut.   WHen I reopen final cut, the current Project doesn not appear in the library.
    (The matching event is there in the EVent Library.)
    When I go to Finder, I can find the correct final cut project file.  It doesn't open, saying it might be corrupt.  There is a  BACKUP folder, and several of those backups seem to work.... Sort of.
    They open the correct video in the preview screen.  It plays correctly.   But.... I cannot export or make changes as there still is no "project" in the project library.
    How can I import this "backup" file into Final Cut X so that I can work on it, export it, etc?
    (And in a related note, the crashing is sudden and weird and only happens in FInal Cut X.  It just goes black, and then a message appears saying something like, "Your computer shutdown because of a problem..."  )
    MacBook Pro.  8GB ram.
    Can you help?
    Brad in Denver.
    PS.   I'm freaking out.  Such a headache..on a deadline and lost 5 or 6 hours of work.
    PPS.  THe import function doesn't seem to work for project files.  (greyed out.)
    Fingers crossed!!  : )

    Something bad has been done in your project library. There should not a waveform caceh folder in there. Some of the other folders look every strange. Have you been moving things arounds inside the projects folder or into or out of the projects folder at the Finder level?
    The project appears to be called Backups. Where was that located? I don't understand how a project would appear in the viewer and not be selected in the project library, while nothing appears in inspector.

  • How can you open a project file backup if the main project won't load?

    This has only started happening in the last couple of weeks. I'm on Logic 10.0.7, OSX 10.8.5. On one particular project, it will be loading seemingly normally, then it just disappears with no crash log, nothing.
    Presumably there is some sort of corruption in the project file.
    In the old pre package days, you would just go to the project file backups folder and pick a previous one. Bingo, you have only lost a little bit of work.
    Now when I show package contents, the project file backups folder has project data files that won't open logic, and are invisible until you have logic open. Which I can't do.
    Rue the day I selected the package option rather than folder.
    Any suggestions?
    Or to put the question another way, how can I convert the project data in the project file backups folder to a file that Logic can recognise and open?

    Having his install the trial is the way to go. Working between AI versions is a pain and as you are finding out almost impossible with 5 versions between the collaborators.

  • In need of a script to backup FCP project files

    I am in desperate need of something that will search through all of my network drives, find Final Cut Pro project files, and copy them to a folder on my desktop. From there I can burn that folder onto a DVD every week for backup purposes.
    I really don’t know anything about Automator, Applescripts, or anything like that. Can something like this be done, and if so, will somebody help me set it up.
    Much thanks

    In Automator, you can start with Finder's "Find Finder Items" action. Just drag and drop or double-click the action in the list to have it added to the workflow.
    Within that action, you can specify the Extension of the files you want to find, whatever the extension may be for Final Cut Pro files. You might also want to add another condition, too, such as modification date.
    If you want to make sure it finds the files you want, add Automator's "View Results" action after it. Run that and see what shows up in the "View Results" action. If all of the files are what you expect, then you can continue to build the rest of the workflow to copy the files to another folder.
    You can remove the "View Results" action anytime you want, or just disable it by clicking on the action's number in its upper left corner. It shouldn't affect the workflow any, but it's really just for debugging.

  • How to restore a song from the "Project File Backups"

    Help! I recorded onto an external harddrive, then copied all the project folders to a different drive. Now, I can't find the project files, but I can find the "Project File Backups" in the Project Folders. I suspect the original project files were saved separately from these folders on the original hard drive, but that is long gone, so I am hoping some one can tell me how to recreate the project from the files in the "Project File Backups" folder.
    ANOTHER CLUE: Stranger still, I can't find any of my logic song files using FILE>OPEN, SPOTLIGHT, nor FINDER- Only those that still populate the "open recent" list.
    Any ideas? Thanks friends!

    Hi there
    Your Project File Backups are simply the previous Project files you've saved. These files are essentially the strip settings, layouts, midi, and pointers to the audio files of your Project.
    If you have trashed the audio files then your are outta luck. This is why you should Consolidate (File-->Project-->Consolidate) all of your projects into one Project Folder on your HD. That way all of your Audio files as well as your sample files and UltraBeat files remain consolidated within a Project Folder. You can then Copy that entire Project folder to another location and have all of the respective files for that Project.
    Sorry for your loss.
    Regards,
    bb

  • Project File Backup

    I'm running Logic studio 9 with OS 10.6.3 and The Project File Backup is intermittent. Has anyone had this problem? I also have a session hanging after a bounce causing me to force quit, (the bouncing window is still visible). Anyone having trouble with using Vintage Warmer 2, Sound Toys or Waves?

    noise patrol wrote:
    I'm running Logic studio 9 with OS 10.6.3 and The Project File Backup is intermittent. Has anyone had this problem? I also have a session hanging after a bounce causing me to force quit, (the bouncing window is still visible). Anyone having trouble with using Vintage Warmer 2, Sound Toys or Waves?
    Are you running in 64 bit mode? Waves and Sound Toys use ilok protection, and I've read that the ilok software is not yet 64bit ready, which could explain why you are having problems.. if you're in 64 bit mode that is. We have Sound Toys and some Waves plug ins at the studio, and we're running Logic in 32 bit mode with no specific problems with those plug ins, the ilok seems to be working OK.

  • Final Cut Pro X Project file corrupt, how to restore for backup when not prompted by the program?

    We have a project on an iMac 13 4gb RAM. We have discovered that it is not the event, but instead it is the project file that has become corrupted. When we try to poen FCPX it crashes, and reports that it has crashed. however, if we remove the project file and leave the event and then try to open FPCX, there is no problem. Looking online, usually FCPX asks if you want to open from the backup hat FCPX makes of yourproject. However, since we cannot opn FCPX with the project, then we cannot do this!
    Just as a side note, this is a VCE media project that is due tomorrow... So any ideas are extremely welcome!!!

    This is absolutely ridiculous:  a Project is a work so complicated, there should be MULTIPLE backups (as in Logic or Photoshop) and an easy "Restore from Backup" File command!  Instead, you must manually COPY from the backup folder in Finder -- OUTSIDE the program (and which contains only the most RECENT backup) into the parent project folder for the particular project.  This capability is almost useless, since the only backup you have might be just 15 minutes old.  Then you are up a creek.
    Fortunately there is Time Machine, and you can use that to go back far enough to find the work you accidentally destroyed (or APPLE destroyed) and MANUALLY copy that over into the correct folder using Time Machine restore procedures. 
    I am finding, which led to rant, that when I delete an Audio Effect, the Whole Project is deleted when the audio track is selected.  I'm doing something wrong, or here's more work for the programmers.
    Really, this is unacceptable work.  And thank goodness for my Time Machine.  Program 101 in work like this is MULTIPLE backup capability and an easy restore command.
    This needs to be addressed pronto.  I'm holding my breath.

  • My premiere project file size just went from 190MB to 5.61GB... and now it won't open! Anyone know how this happened?

    My premiere project file size just went from 190MB to 5.61GB... and now it won't open! Anyone know how this happened? Or how to prevent it from happening again? Thankfully I saved a backup project of the 190MB file size.

    warp stabiliser?

  • "unable to open project file" on external hard drive

    I see other users had this same issue, but I read all the relevant posts and they haven't helped me. basically, I created and saved a project (along with all scratch disks) on an external hard drive. then, when I closed the project and re-opened it, it was "unable to open project file." however, it looks like all the project files are still on the hard drive (capture scratch, autosave vault, etc.) so seems like this should be redeemable. what can I do?
    thank you in advance, you are angellic!

    What is the exact message? Try copying it to your computers system drive and opening it? What about in the Autosave vault? Look in there for the last backup, try opening that.
    Shane

  • How do I copy editted clips from one project file to another?

    I am working on a project. At one point, before I finished I "saved as" with another name to give me a backup. After working on it for a while I found that a section of the video had gotten out of place (a lot of clips and layers). I would like to copy this portion from the other project file I had saved. I can't figure it out. Both projects have the same clips in the project bins. I am using Premiere 6.5, with a Pinnacle DV500 DVD capture card. My computer is a duel P3 800, 512RAM, 40Gig Sys. drive and 480 Gig RAID 0. Please Help!

    Throw away everything you don't want to copy, save as a new project, import the new project into the other one.

  • How can I access my project files without iTunes on an iPad 2 (non-jB)

    The other day while I was using the device, it just reset itself and decided I needed to activate it again. When I try to do this I get a message saying the "device is not part of the developer program..." and I have tried removing it's UDID from the provisioning portal at the dev website to no avail. All I really care about is retrieving my GB project files from the device, as I can most likely get over the fact that my other content might go missing. The device shows up on the left side-pane under devices in itunes, but when I click on the Apps tab, I cannot get the box that would normally be there allowing me to transfer files to and from the device for supported apps. I have searched tediously on this topic and frustratingly found no information that has helped. I also opened a case with apple and they gave me some BS suggested light reading (http://bit.ly/uHbxFs) that had nothing to do with the issue. Please Halp!

    you must run the official iOS5 version, no developer version which likely is a beta . Use itunes 10.5 , connect your device, let it make the backups and then hit the "restore" button in itunes. This will download and install the one and only supported OS for your device.
    Once you have this on it, you can install all apps, including garageband.

  • DVDSP3 Won't Make New Buttons, Won't Open Project Files

    HELP!!!!
    The button editor in my DVDSP 3.02 stopped working after it opens a new project file. I mean, when you go to a menu and then hold down the mouse button and drag, nothing happens. It will not create any new buttons. Even if you drag a button template over and use the pop-up submenu. It will not create any buttons.
    Worse is what happens when I open an existing project file. Then it stalls forever at the "Loading Menus" point in the "Loading Project" dialog. It doesn't crash, it just stalls there forever. However, if I click "cancel" - THEN the app crashes.
    But it won't make buttons in the new project files it can open, and it won't open any existing project files. Very confusing.
    Here's what I know and have done to this point...
    If I watch this whole process in the Activity Monitor, here's what I see. I find that two apps named "DSPX_AEncoderServer" and "DSPX_EncoderServer" get hung (and turn red) when the "Loading menus" point is reached in the document load. Sometimes DVDSP will say it's hung, too, but not always.
    However, I found that my DVDSP app still runs flawlessly if I boot from my "clone" backup drive, which is how I'm still able to get work done currently.
    Back on my normal boot drive, all of the other Apple Pro apps still run perfectly - FCP, Compressor, A-Pack, etc. But not DVDSP.
    OK, here's a clue, but I don't know what it means. Two months ago, I had the logic board replaced on my G4. All the pro apps made me re-register. Then this DVDSP problem appeared out of the blue. Nothing fixed it that I could find. What made it finally go away was the timely arrival of a new Security Update to the OS via "Software Update." Installing that made the problem with DVDSP go away, for good.
    Not doing hard drive maintenance, repairing privleges, fully optimizing OS, Disk Warrrior, Norton DiskDoctor - none of them worked. But that Security Update showing up, installing, and then doing the post-install optimize fixed the problem. That time. Or maybe it didn't? Because...
    Two weeks ago the FW ports on the "new" logic board blew, just like the original, so AppleCare gave me a third logic board.
    Same deal as before with all the pro apps wanting to re-register because they are seeing a different serial number in firmware.
    Also, just like before, I have this trouble with DVDSP. But I can't fix it this time.
    In the past three days (two of which were really one "large" day with no sleep period in between) here's what I have done in an attempt to fix this, without success.
    I dumped the receipts for the DVDSP v3 installs and upgrades, then I reinstalled the DVDSP components from my original disc, and then reinstalled the online 3.02 upgrade. No go.
    I did all of the above, except this time I found an Apple TechNote on deinstalling DVDSP v2. So using that as a guide I did my best to delete the app and all its supporting files, as well as the install receipts, before doing a fresh install of the app and the v3.02 upgrade. No go.
    I did a plethora of hard drive and system maintenance thinking that perhaps some files had been misplaced, a hard drive directory corrupted, a bundle bit here or there un-set, a few system libraries de-optimized, various font and system caches corrupted, as well as numerous log files too filled up with "essential" data to run correctly therefore in need of deletion.
    Along with anything else I could think of based on my 20+ years of supporting Macs in a production environment. Again, no go.
    So I deleted all the DVDSP files and receipts from my boot drive again. Then I dumped all the install receipts for OS 10.3.9 and ran the "combo" version installer for that OS upgrade. Next I dumped the receipts for the Security Updates and reinstalled those. Then I did drive maintenance, OS permission fixing and optimizing. Then reinstalled DVDSP and friends. Still no go.
    But my version of the app that is on my backup hard drive that I cloned right before taking the Mac to the shop for the 3rd logic board still runs just fine. I boot off that drive (connected via Firewire) and DVDSP will run fine.
    I'm confused.
    Now I'm not inclined to spend a lot more time on this since my DVDSP 4 upgrade is due for delivery any day now, and I'm sure that will work OK. Especially since I'm planning on moving to Tiger at that point, too.
    But in the meantime, it sure would be nice to know what happened to my "regular" copy of DVDSP.
    Can anyone figure this out, or at least give me some new ideas on now to troubleshoot this?
    Apple Support refuses to help me because I'm still using an "unsupported" version of DVDSP. Even though I'm still using it because my purchased upgrade is being delivered via "media mail" - the US Postal Service's version of the proverbial "Slow Boat."
    That was a difficult and frustrating conversation withthe Apple Support rep, too, let me tell you. I've been a fan, user, customer, supporter, and evangelist for Apple hardware and software since 1984. But when that voice on the other end of the phone essentially told me that...
    a) if I was not using the latest and greatest version of the software, AND...
    b) if I was not willing to spend several hundred dollars each year on support fees...
    ...then I was basically on my own and they would not help me. Worse, they didn't care that I was an old and loyal customer, or that I was even a stockholder in the company. The support system essentially told me to get stuffed. Yee-e-e-ow!!!!
    I was especially mad about this because I have this nagging suspicion that this whole problem I'm having with DVDSP is somehow related to some kind of copy protection scheme that Apple has going on but doesn't talk about.
    I mean why did I need to re-enter the serial numbers for all my pro apps when I changed logic boards? Is my problem being caused by some Pro App component that knows enough to stop working when it thinks it's been bootlegged, but doesn't know enough to trigger a re-registration of itself.
    At this point, that idea is beginning to sound more and more plausible as the cause of my trouble.
    Anyway, this problem is seriously hurting my workflow. I'm out of ideas and I need some guidance from the collected wisdom of the forum to solve this problem.
    Thanks in advance.

    I didn't see anywhere that you had downloaded and
    installed the latest proApplication Support file. If
    you haven't, you should do this next:
    http://www.apple.com/support/downloads/proapplications
    upport31macosx1039.html
    Hal:
    I had reinstalled that ProApps Support version, but I hadn't done it since I deleted all the app files and such, then done a complete reinstall from the DVD.
    So I just downloaded it afresh, and then installed it. Then I restarted, and then repaired permissions with Disk Utility.
    Still no go.
    I'm bamboozled. I thought I knew something about this stuff, but I guess it's good to stay humble.
    However, my 5.1 studio upgrade just arrived in today's mail. I think I'm going to take a chance. I'm between projects right now. So I'm going to upgrade my OS to Tiger>then 10.4.6 upd. Then I'll take a shot at installing the new FCP Studio upgrade and see what happens.
    Any comments or advice? Otherwise, wish me luck. I'll let you know how this works out with a post here.
    Sure wish I could figure out what's going on with my DVDSP v3, though. I really HATE to leave unresolved problems hanging out there. Seems like they always come back to bite you again if you don't deal with them.
    Thanks for the help.

  • I updated to Mavericks and realized my FCP project files are not there? Help!

    Someone please help. I had built a new video project the other day and everythying worked fine. However I needed to edit an older job and and went to my library and when I click on the Event, my source files are there but no my project files. On the job I just did recently those projects files are there. I went to my folders where my FCP event and project files are and tried to open one of the "backup" files and that didn't work.

    I'm assuming you've updated your projects and events. If you haven't, you should.
    If the are updated, you should have an event named Updated Projects. Look in there.
    You should access your projects through the app, not the Finder. There is no no longer any such thing as fcpproject files in the new library model.
    Russ

  • Transferring and backing up project + files

    Hello all -
    I'm working on a project and starting to get a little paranoid about the diminishing space on my system hard drive (I've used up about 65%)
    It was suggested to me that I transfer all my logged footage and FCP working files to an external hard drive (I have a LaCie 160GB firewire drive purchased for just this purpose).
    Question #1: are there any tutorials out there showing how to execute this process, step-by-step? Naturally, I'm worried about losing everything during the transition.
    I was also advised to backup my files on DVD under compression. Again, any tutorials showing how that's done?
    I feel like the more places I save the individual files and project as a whole, the more secure I'll feel. Having everything on an external drive with a lot of free space (which will become my scratch disk, right?) AND on a DVD will ensure that I don't lose anything.
    How do most of you normally work - do you keep your projects on external drives? But what if the external drive conks out or gets corrupted? Is that a matter of faith or do you also save to DVD as was suggested to me? Do you then save to DVD after each daily editing session?
    Apologies in advance for all of the questions (as well as my glaring ignorance) and thanks to anyone who can provide any help with this.
    Roop
    G4   Mac OS X (10.4.6)   FCP 5.1

    It is highly recommended NOT to keep your media or render files on your system drive. I'm surprised it hasn't been causing problems already.
    Instead, keep all media (video and audio clips, photos, graphics, etc) on a separate physical drive. Since you have a G4, you can easily add additional ATA (aka PATA) drives inside ... up to 3 additional in most models. That would be preferable over an external Firewire drive.
    As for storing the other files associated with an FCP project, most people keep the project file on the system drive (along with the OS and Apps), and they generally keep the Autosave files on another drive. That way you'll always have a recent copy of the project file. I do not recommend backing up any files that can easily be re-captured. But I DO recommend backing up photos, graphics, music, VOs, etc that cannot be re-captured.
    It's also a very good idea to make regular backups of important files off-premises. In the event of theft, fire, flood or other disaster, you'll be able to retrieve the backup and get back to work ASAP.
    -DH

  • Project files being overwritten in Captivate 5

    When we create a new project in Captivate 5 and save it we do the following:  "File", "Save As" and choose our preferred location which happens to be a folder on the local desktop.  The next project we create and save we go through the same process but, of course, change the name of the file.  The problem we are having is that it overwrites the previous file and we never end up with more than one captivate file in that folder at a time.  The previous files are overwritten and gone.  Is there a setting that I am unaware of that is causing this or do I need to open a support ticket?  Anyone encounter this previously?

    In my first days of playing around with CP5 I lost all files in a folder into which I saved the CP5 project (I had to restore all of them from a backup that I -thanks god- created just before that).
    Then I created a separate folder dedicated only for CP5 project files and published files. Since then no files have been lost - but I don't know the reason why.
    So I'm also very interested in some detailed information on when files are deleted from the target folders by saving or publishing CP5 projects.

Maybe you are looking for