JClient JComboBox issue on Find mode

Hello! I am using JComboBox LOV mode on my JClient form. It works fine with a small glitch.
On a first time query, I pick a value and execute, it works great.
On a second time (find mode), if I choose another value in the comboBox it trys to remember the old value only, ignore the second time query criteria.
could anybody please shed some light on this how to overcome this.
Thanks in advance
Kathir

Jdeveloper version (10.1.2.1.0)
Scenario:
Step 0: Create BC for dept and emp as read only view object.
Step 1: Create Empty runnable panel
Step 2: Select empno, ename, job and navigation bar(empIterator) from the data control palette on the panel
Step 3: Choose deptno of emp view from data control palette has Jcombobox (turn the deptno JcomboBox property editable to true)
Step 4: From the structure window, choose deptno data source (selected as Jcombobox) and assign Source target as deptIterator
and target as EmpIterator.
Step 5: map deptno from deptIterator and deptno from empIterator
Step 6: Lov Attribute tab choose only deptno.
Step 7: Run the panel, put the form in the find mode.
Step 8: Choose any deptno and execute query (this will work fine)
Step 9: Again put the form in the find mode, and clear deptno
Step 10: and execute you will still get the old query result.
Please let me know if I need any clarification.
I appreciate your time and help!
Thanks

Similar Messages

  • JClient Find Mode question

    I have an application where I want to give the user the option of which columns to search for a user-given key. Everything works except that the find mode ANDs the results from the selected columns, so if I'm searching for a number string that appears in the Card ID column, no results are displayed, since that number doesn't appear in the Last Name column as well. Is there a way of setting Find Mode to OR the results?

    Scott,
    if i remember well just from looking at the table when going in find mode, then all entries in one lines are AND'ed together, while different lines are OR'ed together.
    Frank

  • Problem with "find" mode in adf/swing application

    Hi all,
    I'm working on ADF Swing application which uses MS SQL Server 2005 (JDeveloper 10g 10.1.3)
    I think that my issue might be well-known…sorry if it has been already discussed somewhere else…
    I have a problem with the “find” mode for a detail panel in a master-detail form…(To make it clear the “find” mode is switched on when clicking on the special button on a navigation panel).
    So this mode works well in a master panel, but it demonstrates strange behavior on a detail panel, i.e. it takes me two attempts to find the necessary child object and it doesn’t switch back in a simple way from this mode to the normal mode….say if we are in the department 10 (Dept is a master form) we can’t simply find KING employee (Emp is a detail form)…is there any workaround for this?
    Thanks in advance. Alex.

    Hi Frank, please look this issue

  • Issue in Develop mode for embedding google map

    Hello,
    I am facing an interesting issue in Develop mode for embedding google map html code (screenshot is attached)
    The map rectangle showing almost same size box underneath filled in black, while in preview mode, it is working properly. I could not find the reason, where I am doing something wrong.
    Many thanks .

    Hi Muzeone,
    Its a default behavior with every WYSIWYG HTML Designer or editor,
    Reason :The black box which is appearing in the design view is because you might have tried increasing the size of the iframe thumbnail.
    If you are using Iframe and using Insert HTML feature in MUSE, make sure when you paste the iframe code in MUSE, it creates a thumbnail in design view do not resize it in design view.
    Size does not change the height and width of Iframe in MUSE as its being controlled by the codes that you are inserting.
    The design view will only show you iframe height which is defined in the codes below that it will show a black box.
    Enjoy working with MUSE !!
    Thanks
    Prabhakar Kumar

  • Issues Exiting Sleep Mode and Odd Behavior On Restart with GPU

    I'm running a completely stock HP P7-1240 desktop except for an EVGA GeForce GTX 750 TI SC GPU. The GPU runs fine when the computer is up and running (which is odd because the forums have several other threads mentioning that the 700 series should be incompatible with my BIOS).
    However, there are two main strange problems that have arisen since installing the GPU. One is that, whenever the computer enters sleep mode, it refuses to wake back up properly. It seems to me that the computer activates but does not send any signals out from the back panel (at the very least, no video signal because my monitors stay blank). On a rare occasion, it will wake back up properly, but at least 90% of the time, it needs to be restarted. Upon restart, sometimes the same issue occurs (no video output), and the computer needs to be restarted a second time before it will boot up again.
    This leads to the second problem. When starting, the computer goes to a black screen listing basic computer specs (see attached photo. At this screen, the computer does not respond to any input.  It proceeds to beep 3 times, all the same length and pitch spaced about 30 seconds apart. After the third beep, the screen goes black and then the computer boots up normally with no further odd behavior.
    Without the GPU, none of these issues happen. At the very least, not regularly.
    I have seen another thread mentioning that, although the HP support page for my desktop does not list it, there is a BIOS update for my motherboard that has fixed issues relating to more modern GPU's. By nature of it being a BIOS update that does not (appear to) officially support Windows 7, I'm hesitant to move forward with that potential solution.
    Although I'm planning to build myself a new computer from scratch at some point, I was hoping to at least get another year out of this machine, if not 2.  While this issue doesn't appear to be immediately threatening the stability of the computer, I can't help but think that this is an issue I should iron soon to avoid future issues (not to mention it would save me a fair amount of electricity to be able to enter sleep mode on a regular basis).
    Any suggestions would be greatly appreciated!
    This question was solved.
    View Solution.

    Hello @johnmwalker,
    I understand that you are having some issues with your HP Pavilion p7-1240 Desktop PC waking up from sleep mode. I am not sure how much can be done for the delay on your startup with an OEM BIOS you are limited in what you can do and since your graphic card works I think you would be better off not messing too much with the BIOS at this point. The one thing I would try is going into the BIOS using the HP Support document:BIOS Setup Utility Information and Menu Options, and under Advanced > Power-On Options set POST Messages to Disable and POST Delay (in seconds) to None.
    Now the waking from sleep mode issue  could just be the hybrid sleep setting causing you an issue with sleep mode. Use the following steps to disable hybrid sleep:
    Step 1. Click Start
    Step 2. Click Control Panel.
    Step 3. Click System and Security
    Step 4. Click Power Options
    Step 5. Click High Performance from Power Options
    Step 6. Click Change plan settings
    Step 7. Select Change advanced power settings
    Step 8. Click the plus (+) sign next to Sleep
    Step 9. Click the plus (+) sign next to Allow hybrid sleep
    Step 10. Select Off from the drop-down menu
    Step 11. Click OK
    Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Making a "SelectOne" list on a Read Only VO in Find mode

    I have a simple search page. The page is built on one VO - that is RO. One attribute/column of this VO is a type field - which I have a lookup VO for.
    The search form goes directly to find mode. The column I want to define the simple "Select One" method for is of course part of the Read Only VO, but in find mode I can easily type in the field and the search works great.
    When I try to create the dropdown (Select One) ADF complains and says it's a Read Only attribute and that I cannot use it to assign values to. This is correct - however in Find mode it's not read only.
    So is there a way to bypass this problem?

    Well, gladly I can report I solved this myself.
    Makes little sense though - when I created the Read Only VO, I "had fun" and changed the attributes of the VO to "no change". That should be given, since the VO is read only. However, that was what caused the issue. The update is set for "Always" now, and while the view is still read only, I have the drop down working perfectly.

  • Find Mode doesn't work

    Hi,
    Maybe this is correct behaviour, but for me it's quite strange. I create new project (ADF+UIX), create Business Components From Tables (only one small table). Then I create new DataPage on struts diagram and edit this page (I choose uix as type of page). I drag on page View Object that I have just created (choosing 'Search form' from 'Drag and drop as' drop-down list). I select just created UIModel in Structure pane and change value of 'Find Mode' from false to true in Property Inspector.
    With those operations performed my page works perfectly - it opens without execution of query, and shows fields to fill criteria in.
    Then I put at the bottom of page link pointing to the same page (assuming that page is named 'dataPage1.uix', the link points to 'dataPage1.do'). When I run page, it's works only till I click that link for the first time. From that moment the page cease to work. It is impossible to change the value of Find Mode using the button which normally do it. It is only possible to create and delete search criteria rows.
    Can anyone confirm tha it is a bug and I should register tar on that issue or maybe this is normal that after using link between pages Find Mode will not work anymore? Maybe there is a work-around for this?
    Leszek

    yes we found this problem and oracle filed bug 4358538

  • JPanel Binding - Find Mode

    I have a JClient application with a data panel and JUNavigation bar. Find mode lets me use the data panel to enter search criteria but I don't know how to programatically determine if the "Find Mode" is enabled?
    All thoughts and suggestions are welcome.
    Elder

    Hi Frank, thanx for the reply.
    I didn't think of checking the methods of the panel binding (was looking at the JUNavigation bar)...but upon doing so I found a "setFindMode(boolean)" but no "getFindMode". I didn't see anything in the VO.
    There must be a way of "getting" the current mode and I'm probably overlooking something really simple.
    Again, I appreciate your help.
    Regards,
    Elder

  • How to escape a single quote in a find mode view

    Hello,
    I'm working with JDeveloper 10g.
    I've defined a view that is used in "find mode" in a JSP.
    When a value with a single quote is inserted in a field of the search form, an exception is thrown:
    JBO-27122: SQL error during statement preparation.
    ORA-00907: missing right parenthesis.
    The problem is that the "single quote" is not being escaped:
    WHERE STREET LIKE 'ABAT ESCARRE, DE L'A'
    How could I force the view to escape the "single quote"?
    Thanks

    Arrest the single quote by calling a javascript method.
    This might help you
    Re: af:clientListener javascript function call question
    http://download.oracle.com/docs/cd/E12839_01/apirefs.1111/e12419/tagdoc/af_clientListener.html
    Edited by: Srinidhi on Mar 23, 2011 3:46 PM

  • Open Purchase Order Form in Find Mode

    Hi,
    I have to open the Purchase Order Form in Find Mode.How to open in Find mode?.
    I Used the Following Code in Form_Load  && Action_Success=true
    if(oForm.Mode = SAPbouiCOM.BoFormMode.fm_ADD_MODE)
            oForm.Mode = SAPbouiCOM.BoFormMode.fm_FIND_MODE
    But it is not working.Please help me to solve this.
    Regards,
    M.Dhivya

    call
    ActivateMenuItem( "1281")
    in application object.

  • How to disable a Entire row in a Matrix in Find Mode (User Form)

    Hi,
    How to disable a Entire row in a Matrix in Find Mode (User Form)
    Regards
    Jambu

    Hi,
       Iam using Bubble event = false in click event but the matrix row
    is allow to edit but we cant save the document in Find Mode That is fine.
    What is my actual requirement is In find mode matrix Row not allow to enter the data .
    For examble In ADD mode i enter the data in Three rows (Item Section - Matrix) and
    save the document. Whwn i open the document in find mode the three row is not allow
    to editable like the same functionality of PO, sales Order, etc ..
    Regards
    Jambu

  • How to look at a query string from Nav Bar Find Mode

    I would like to view the resultant query string from the Navigavtion Bar's Find Mode. I am using a Master/Detail and am querying with the selection criteria from the detail only.
    I am getting unexpected results, and would just like to SEE what the query string IS.
    Thanks

    I am getting unexpected results, and would just like to SEE what the query string IS.Run your app with diagnostic output turned on. Here's the instructions for that.
    To turn on diagnostic, go to the IDE,
    1. Select the project.
    2. Do right mouse click and select "Project Settings..."
    3. On the Settings dialog, select Configurations/Runner.
    4. In the righthand side pane, you should see a textbox for "Java
    Options". Please add the following JVM switch:
    -Djbo.debugoutput=console
    Then, rerun. The run command should include
    -Djbo.debugoutput=console as in
    "D:\JDev9i\jdk\bin\javaw.exe" -Djbo.debugoutput=console -classpath ...
    You should now see a lot more output on the IDE's message window.
    This should also include the findmode query that gets built after you hit the execute button from a findmode panel.

  • ADF Faces w/ADF BC: Bug(?) w/null values in drop down list in find mode

    Using JDev 10.1.3.0.4.
    I have a page that shows a single record. The user can toggle between regular and Find mode to enter query by example criteria.
    One of the fields has been bound to a dynamic list. The "No Selection" Item in the List Binding Editor is set to "Selection Required".
    When editing a record, this list does not have an empty item. When the user enters find mode, the list has an empty item in the list - which makes sense since the user might not want to search on a value in that particular field.
    However, if the user enters find mode, selects an item from the list, executes the query (Execute action), and enters find mode again then the empty item no longer shows up in the list. Is this a bug?
    (Note - there is an easy workaround - if you delete and create in find mode, then the new critieria record has the list fixed with an empty item in it.)

    Using JDev 10.1.3.0.4.
    I have a page that shows a single record. The user can toggle between regular and Find mode to enter query by example criteria.
    One of the fields has been bound to a dynamic list. The "No Selection" Item in the List Binding Editor is set to "Selection Required".
    When editing a record, this list does not have an empty item. When the user enters find mode, the list has an empty item in the list - which makes sense since the user might not want to search on a value in that particular field.
    However, if the user enters find mode, selects an item from the list, executes the query (Execute action), and enters find mode again then the empty item no longer shows up in the list. Is this a bug?
    (Note - there is an easy workaround - if you delete and create in find mode, then the new critieria record has the list fixed with an empty item in it.)

  • How to use CFL in Business Partners Master in Find Mode

    Hi,
    I have a problem in Business Partners Master Form. I need add conditions in Choose From List in Find Mode when I set an asterisk in the CardCode TextField for filtering the businnes partners list.
    When I capture the et_CHOOSE_FROM_LIST itemEvent in BeforeAction, I can't get the ChooseFromList ID for adding the conditions in the ChooseFromList Object.
    Sample Code:
    Public Sub ItemEvent(ByVal FormUID As String, pVal As SAPbouiCOM.IItemEvent, BubbleEvent As Boolean)
          Select Case pVal.EventType
                Case et_CHOOSE_FROM_LIST:
                    Dim lcflE As SAPbouiCOM.ChooseFromListEvent
                    Dim id As String
                    Set lcflE = pVal
                    id = lcflE.ChooseFromListUID -> The ID is "-1"
          End If
    End Sub
    Thank's in advance
    Best Regards

    Hello Rafea,
    if you can't get it via lcflE.ChooseFromListUID -> The ID is "-1",I guess you need to know choosefromlist UID by test one by one with oForm.ChooseFromLists.Item(i). Or you can save the fom as xml then chech the CFL UID.
    If pVal.FormType = 139 And pVal.EventType = SAPbouiCOM.BoEventTypes.et_CHOOSE_FROM_LIST Then
                If pVal.ItemUID = "4" Then
                    If pVal.InnerEvent And pVal.Before_Action Then
                        BubbleEvent = False
                        Dim oForm As SAPbouiCOM.Form
                        oForm = SBO_Application.Forms.Item(FormUID)
                        Dim oCons As SAPbouiCOM.Conditions                   
                        Dim oCFL As SAPbouiCOM.ChooseFromList
                        'oCFL = oCFLs.Add(oCFLCreationParams)
                        oCFL = oForm.ChooseFromLists.Item("2")
                        oCons = oCFL.GetConditions()
                        'Note: Add the condition only once.
                        If 0 = oCons.Count Then
                            Dim oCon As SAPbouiCOM.Condition
                            oCon = oCons.Add()
                            oCon.Alias = "Cardcode"
                            oCon.Operation = SAPbouiCOM.BoConditionOperation.co_EQUAL
                            oCon.CondVal = "C0001"
                            'Set your own condition here instead of the system conditions
                            oCFL.SetConditions(oCons)
                        End If
                        BubbleEvent = True
                    End If
                End If
            End If
    Kind Regards
    -Yatsea

  • Form should not be in find mode

    Hello Experts,
    I have created one form but I am not putting Add button on form. When I load this form and did control + F then CFL is not working. This form going in find mode. I dont want this form in find mode.  What sould I do? Please help me sir.
    Thank You
    Regards,
    Prashant

    Hi,
    Try this
    if pVal.MenuUID = "mnu_MD" and pVal.BeforeAction = False
    LoadFromXML("CustomForm.xml")
    Soft_Form = Soft_Application.Forms.Item("formID")
    Soft_Form.EnableMenu("1281", false)
    end if
    Reply Me

Maybe you are looking for