Jco for ECC 5.0 Unicode

Hi,
   We are using Jco 2.1.8. The SAP system is ECC 5.0(unicode). values are passes correctly from Jco to SAP,But while recieving the Values from SAP to Jco, The field values are not properly passed.ie the values of two consecutive fields are coming into first field itself.
The second field is filled with some garbage characters.
   The same code is working fine foe SAP system 4.6.
    Do we need to enable any settings when we work with unicode systems?
   Or on the java side Do we need make any changes in the code.
   Please suggest.
Thanks in Advance
Veerabhadram..

Hi,
We've the same problem with SAP ECC 6.0 (Unicode) and JCo 2.18.
Values are passed correctly from JCo to SAP but while recieving values from SAP to JCo, the field values aren't correct. Otherwise, is working in SAP system 4.6 (non unicode).
We've changed repository initialization like it explains on:
[http://help.sap.com/saphelp_nw04/helpdata/en/87/b55a4201301453e10000000a155106/frameset.htm]
What are we doing wrong?
Please suggest.
Thanks,

Similar Messages

Running Unicode-Specifc Reports for ECC 5.0 (Unicode).

Hi! All,
I have freshly installed ECC 5.0 (Unicode Kernel 6.40). In ECC manual I cannot found anything about Running Unicode-Specific Reports. But in the case of Solman/XI Unicode version running Unicode-Specific Reports is
must. (RUTTTYPACT and UMG_POOL_TABLE). Is it also applicable for ECC 5.0 or I do not have run these reports for ECC 5.0 ?
Also I have installed only ABAP Engine of ECC 5.0 Is it OK. (I mean Fullinstallation of ECC ?) or I have install Java Add-ons also. It it is can you please send me the CD/DVD no. to install JAVA Addon Engine.
Already I have installed permanent License and config. TMS Domain.
Thanks and regards,
Pratip Bhattacharyya

Solved.

Unicode Compatability is a pre requisite for ECC 6.0

Hi all,
Can any body send me any link or any document which says tht Unicode Compatability is a pre requisite for ECC 6.0. its really urgent.
Regrads,
Ruchika saini

Hi
see this
The Link will be helpful to you.
Re: Upgrade 4.6 to ECC - What are the responsibilites
regarding Unicode influence in Standard programs
Very good document:
http://www.doag.org/pub/docs/sig/sap/2004-03/Buhlinger_Maxi_Version.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d37d1ad9-0b01-0010-ed9f-bc3222312dd8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/589d18d9-0b01-0010-ac8a-8a22852061a2
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f8e316d9-0b01-0010-8e95-829a58c1511a
You need to use the transaction UCCHECK.
The report documentation is here
ABAP Unicode Scan Tool UCCHECK
You can use transaction UCCHECK to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
Some application-specific checks, which draw your attention to program points that are not Unicode-compatible, are also integrated.
Selection of Objects:
The program objects can be selected according to object name, object type, author (TADIR), package, and original system. For the Unicode syntax check, only object types for which an independent syntax check can be carried out are appropriate. The following object types are possibilities:
PROG Report
CLAS Class
FUGR Function groups
FUGX Function group (with customer include, customer area)
FUGS Function group (with customer include, SAP area)
LDBA Logical Database
CNTX Context
TYPE Type pool
INTF Interface
Only Examine Programs with Non-Activated Unicode Flag
By default, the system only displays program objects that have not yet set the Unicode attribute. If you want to use UCCHECK to process program objects that have already set the attribute, you can deactivate this option.
Only Objects with TADIR Entry
By default, the system only displays program objects with a TADIR entry. If you want to examine programs that don't have a TADIR entry, for example locally generated programs without a package, you can deactivate this option.
Exclude Packages $*
By default, the system does not display program objects that are in a local, non-transportable package. If you want to examine programs that are in such a package, you can deactivate this option.
Display Modified SAP Programs Also
By default, SAP programs are not checked in customer systems. If you also want to check SAP programs that were modified in a customer system (see transaction SE95), you can activate this option.
Maximum Number of Programs:
To avoid timeouts or unexpectedly long waiting times, the maximum number of program objects is preset to 50. If you want to examine more objects, you must increase the maximum number or run a SAMT scan (general program set processing). The latter also has the advantage that the data is stored persistently. Proceed as follows:
- Call transaction SAMT
- Create task with program RSUNISCAN_FINAL, subroutine SAMT_SEARCH
For further information refer to documentation for transaction SAMT.
Displaying Points that Cannot Be Analyzed Statically
If you choose this option, you get an overview of the program points, where a static check for Unicode syntax errors is not possible. This can be the case if, for example, parameters or field symbols are not typed or you are accessing a field or structure with variable length/offset. At these points the system only tests at runtime whether the code is sufficient for the stricter Unicode tests. If possible, you should assign types to the variables used, otherwise you must check runtime behavior after the Unicode attribute has been set.
To be able to differentiate between your own and foreign code (for example when using standard includes or generated includes), there is a selection option for the includes to be displayed. By default, the system excludes the standard includes of the view maintenance LSVIM* from the display, because they cause a large number of messages that are not relevant for the Unicode conversion. It is recommended that you also exclude the generated function group-specific includes of the view maintenance (usually L<function group name>F00 and L<function group name>I00) from the display.
Similarly to the process in the extended syntax check, you can hide the warning using the pseudo comment ("#EC *).
Applikation-Specific Checks
These checks indicate program points that represent a public interface but are not Unicode-compatible. Under Unicode, the corresponding interfaces change according to the referenced documentation and must be adapted appropriately.
View Maintenance
Parts of the view maintenance generated in older releases are not Unicode-compatible. The relevant parts can be regenerated with a service report.
UPLOAD/DOWNLOAD
The function modules UPLOAD, DOWNLOAD or WS_UPLOAD and WS_DOWNLOAD are obsolete and cannot run under Unicode. Refer to the documentation for these modules to find out which routines serve as replacements.
Regards
Anji

BSI Tax Factory on ECC 6.0 Unicode

I'm looking for some help with using BSI Tax Factory on an ECC 6.0 Unicode System. Does anyone have any experience with using BSI Tax Factory on the Unicode version of ECC 6.0? Were there any special steps that were taken in order to make it work? I spoke with someone at BSI and they told me that Tax Factory was not Unicode compliant and that I should talk to someone at SAP to find out what steps needed to be done to make the system work. While I inquire further with both SAP and BSI I thought I would post something here as well to see if anyone could offer any assistance.
Thanks in Advance!
-Nick

Hi Nick,
BSI TaxFactory is not unicode complaint. But in the past we have had customers who converted from non-unicode to unicode and had no problems with BSI TaxFactory.
Export the BSI related data from the DB and import it back after the unicode conversion. And everything works fine!
Regards,
Tarun
SAP ERP HCM

PDF conversion for chineese characters in Unicode system

I am facing a problem while converting the SAP Script Output to PDF format for Chinese characters.
I am working on ECC (5.0) Unicode system.
Scenario:
After saving a Purchase Order an E-mail is sent to the customer - attaching the
PO output in PDF format. E-mail was received successfully by the receiver, but while opening the pdf all the chinese characters were displayed in junk characters in the pdf. All the English characters are properly displayed. I tried to open the pdf file in Acrobat Reader versions 6.0, 7.0, 8.0. but no result. I used CONVERT_OTF function module for converting the OTF format to PDF format. I tried using the fonts CNSONG also.
I tried by executing the standard program RSTXPDFT4 for converting to PDF by giving the spool. In the spool it is showing the Chinese characters perfectly but in the PDF the Chinese characters were were showing as Junk.
Can you please help and advice to see the Chinese characters in PDF in Unicode systems.
Thanks in advance.

>
Juraj Danko wrote:
> Hi,
> I have similar problem than you ... how have you solved it?
> thanks
> Juraj
I found a solution, but I am not sure, if it was for this problem or
output problem with for example PL in non-unicode systems.
I created the input for CONVERT_OTF with CALL FUNCTION 'PRINT_TEXT'.
PRINT_TEXT has to be called with DEVICE = 'PRINTER',
DEVICE = 'ABAP' uses internally the wrong code page.
You have also to set otf_options-tdprinter to a valid printer,
if it is empty, the default printer from user settings is used.
You can use code example from SAP note 413295.
Before you call CONVERT_OTF, you can also check entries with 'FC' in OTF input.
The font (see description of OTF format in SAP help) must be set like described in SAP note 144718.
/Tibor
Edited by: Tibor Gerke on Jan 13, 2011 10:29 AM

SQL 2005 with ERP2005 (ECC 6.0) Unicode

Hi All,
I need a few questions to be answered.
Can anybody tell me as to what would be the initial size of the database after an installation of ECC 6.0 Unicode with database as SQL 2005.
Is there any minimum hardware requirements that would have to be taken into consideration before an installation is planned.
Can anyone help me in deciding whether MSCS services or Manual Log shipping would be preferred for Failovers.....
Regards
Anand

Sizing
Hardware sizing should be completed by your SAP partner. Its based on many things. Users, modules, storage volumes, peek, BP, workloads etc etc.
You can do the 'noddy' version with the sapsize on OSS. The output from this is in 'SAPs' you could look up std systems bench marks and get something 'like' it. Else submit the results to the hardware vendor of your choice and they will do it for you.
System Redundancy
Depends what you are trying to do.
MSCS is a fail over HARDWARE only solution. ie if you want to patch or take a node out of service you can by 'failing over' the services on it to the other node. If you get a DB problem MSCS can not help you at all.
Log shipping gives you 'rapid' recovery options for SQL(and there in SAP). The way this normally works is via either manual or automatic log-shipping to a 'standby' system with SQL/SAP loaded on it that can be brought online if you get a problem with the main system.
A well planned system will have fail-over and recovery capabilities, ie it will use BOTH.

Best upgrade path for ECC 6.0

Hello,
We've been stuck on the base ECC 6.0 release for quite a while. There hasn't been management support for the time/resources necessary to implement and test any upgrades. We also have a lot of local modifications to SAP supplied programs that we're planning on phasing out so that we keep closer to standard. This is one of the main reasons we haven't been able to upgrade because of the effort involved in changing processes back to standard. There was also an unwillingness on specific parts of the user base to change their processes. We're now in a position where business and reporting requirements are going to force a system upgrade. We also need run a unicode conversion from non-unicode at the same time.
As we're starting the planning process we're unsure of the best path to allow us to implement future upgrades as necessary. I see that EHP 7 runs on a basis version of Netweaver 7.40. Is upgrading to an EHP pack for ECC 6 better than upgrading directly to 7.4? Can the unicode conversion be done at the same time?
I looked over previous discussions in upgrades but haven't found something that seems to match what we're looking to do.
Thanks.

Good Day
As you have an ECC 6.0 system then you need to do an EHP update on the system.
The latest is EHP7. EHP 7 is based on SAP NetWeaver 7.4 so when you update the system to EHP 7 you will be on NetWeaver 7.4
The most important thing here is that you need to have a supported OS and DB for EHP7 installation. From EHP6 there is a need to have a higher version of OS and DB.
Check PAM for the supported OS and DB combination.
https://service.sap.com/sap/support/pam?hash=pvnr%3D01200314690900005013%26pt%3Dt%257CPLTFRM%26ainstnr%3D012003146949000…
Regarding Unicode conversion you may read this.
2033243 - End of non-Unicode Support: Release Details
If you want to do the Unicode conversion then you should follow CUUC.
Regards
RB

Hardware requariment for ECC 6.0 upgrade from ECC 5.0

Hello
I am on ECC 5.0 with oracle 9.2.0.7.I need to upgrade this to ECC 6.0.
I have already implemented MM,PP,FICO,QM and HCM.My current data base size is 900GB.This has 30GB monthly growth.
With this ECC 6.0 upgrade i am planing to implement PM,EP.
I know converting none Unicode system to unicode system is required some more hardware resources than the none Unicode.
Some document says 40-60% more disk space and 35% more processing speed from current system.
Can any one give me the correct information about the hardware requirement for ECC 5.0 to ECC 6.0 upgrade.
Thanks
Roshantha

Check with the Links
https://websmp102.sap-ag.de/sizing
https://websmp208.sap-ag.de/quicksizer
http://www.4soi.de/
http://www.easymarketplace.de/
Kanagaraja L

Kernel for ECC 6.0 EHP4 / NW 7.01

Dear Experts,
I've one question, I want to update to the latest patch of the kernel. My system is an ECC 6.0 with EHP4/NW7.01which one should I apply? I found the one in the following path: Service.sap.com/swdc - Support Packages and Patches - Entry by Application Group" SAP Application Components" SAP ERP" SAP ERP ENHANCE PACKAGE" EHP4 FOR SAP ERP 6.0 / NW7.01" Entry by Component" SAP ECC Server VPack successor. My doubt is if I only should apply the DB independent and ORACLE.
Kernel Part I (for Basis 7.01)
Kernel Part II (for Basis 7.01)
Should I apply something else? Is there a note that can help me?
Thanks for your support?
Best Regards,
Antonio Rivera

Re: Kernel for ECC 6.0 EHP4 / NW 7.01
Varadharajan M Aug 14, 2010 10:36 AM (in response to Antonio Rivera)
Hi,
The SAP kernel comes as two parts, one is DB dependent and the other is DB independent. The best practice in upgrading the kernel is to update both the parts at the same time. Make sure that u have chosen the right component from the list of kernels in SAP SMP.
The kernel files are available in the following path,
http://service.sap.com/swdc
SAP Support Packages --> My Company's Application Components --> SAP KERNEL 64-BIT UNICODE --> SAP KERNEL 7.01 64-BIT UNICODE
Regards,
Varadharajan M
Helo Master,
I have a Problem
"OS release Windows NT 6.1 7601 Service Pack 1 4x AMD64 Level 6 (Mod 44 Step 2)
is not supported with this kernel (701)".
I go to market place,
My Company's Application Components" My Company's Software" SAP ERP ENHANCE PACKAGE" EHP4 FOR SAP ERP 6.0 / NW7.01" Entry by Component
SAP KERNEL 7.21 64-BIT UNICODE -> Windows on IA64 64bit -> MS SQL SERVER
The following objects are available for download:
File Type
Download Object
Title
Patch Level
Info File
File Size [kb]
Last Changed
SAR
R3ldctl_110-10011206.SAR
R3load Control
110
Info
1070
15.03.2013
SAR
R3load_34-10011206.SAR
R3LOAD
34
Info
3353
27.11.2012
SAR
R3szchk_39-10011206.SAR
R3SZCHK
39
Info
1647
28.12.2012
SAR
SAPEXEDB_100-10011206.SAR
Kernel Part II (database specific)
100
Info
21831
07.03.2013
SAR
SAPEXEDB_22-10011206.SAR
Kernel Part II (database specific)
22
Info
15610
12.09.2012
SAR
SAPEXEDB_30-10011206.SAR
Kernel Part II (database specific)
30
Info
21267
19.10.2012
SAR
SAPEXEDB_40-10011206.SAR
Kernel Part II (database specific)
40
Info
21632
21.01.2013
SAR
lib_dbsl_117-10011206.sar
Database Library
117
Info
2929
06.05.2013
where I download?
and how the update that karnel?
need your support

SAP ECC 6.0 Unicode with IDES installation

Hi,
I need the following answer very quickly, if any one could answer that will be good.
How long (days / weeks/ months) to install the following, consider the person who has never done this before.\
1. Install oracle DB in windows
2. Install ECC 6.0 unicode with IDES in windows
Thanks,
Regards,
Sundar.

Hi,
Solutiona manager: I understand that it is to be installed to get solution manager key and we want only that. We are not using SM for anything else.
All we want is just to install ECC 6.0 IDES ABAP Stack.
Questions: 1. Can I install SM on a server and then install ECC 6.0 IDES on the same server?
2. If yes, what is the disk space required.
OR
Can I install SM on any other machine to get SM key and continue with ECC 6.0 installation?
How much space is required for SM to generate SM key?
Could anyone point me to OSS notes or give me some steps to go about it?
Thanks,

How to install chinese language in sap ecc 6.0 unicode system

Hi,
I want to install chinese language in my sap ecc 6.0 unicode system,where i would get chinese language in maraketplace.
guide me for the same where i have to get chinese language,how to install in sap.
Thanku

Hello,
There must be already some value in zcsa/installed_languages in your instance profile.
Now in SMLT check the language information for checking the relevant value for chinese language and add this value to the parameter : zcsa/installed_languages
Regards,
Siddhesh

Where to download language file *.PAT for Urdu Pakistan for ECC 6.0?

Hi Experts,
We are installing SAP system ECC 6.0 based on HR usages in Pakistan. But there is a problem with the language Urdu for Pakistan. Urdu does not come together with standard ERP 6.0 installaiton packages.
Please help me on how to get the language package for Urdu Pakistan.
Regards,
Ali Taner

Hai,
You need to do an Unicode conversion if you are running a MDMP system, meaning
Multiple Code pages.
If you are using MDMP code page then UNICODE conversion is mandatory.
In Unicode you will get all the languages.
Check the below link, Page 27:
http://www.saphila.co.za/Presentations/6.Tuesday/Stream8_SupportServices/Saphila___Bettina_Schaeumer___Upgrading_to_ERP_6%5B1%5D.0.pdf
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/is-unicode-mandatory-for-ecc-60-1527438?cv=expanded
Regards,
Yoganand.V

Kernel Upgrade for ECC 6

Hi all,
I want to upgrade the kernel patch level for ECC 6.
I download all files in http://www.service.sap.com/patches
path: Entry by application group -> Additional Components -> SAP Kernel ->SAP Kernel 32 bit Unicode -> SAP KERNEL 7.00 32-BIT UNICODE -> Windows Server on IA32 32bit -> Database independent
Then, I extract all, stop SAP server and copy all these files to \SYS\exe\uc\ and restart server. But, on SAPMMC the dispatcher remains yellow "Dispatcher - Running but Dialog Queue info unavailable".
The old kernel patch level is 75, and I extract the file SAPEXE_102-20000972.SAR (patch level 102), but when checking system status, I found that the kernel patch level is not updated.
Do you know this problem ? Do I miss some steps ?
Thank you very much,
Sylvecast
null

MMC connects to the underlying sapstartsrv.exe windows service. Beside starting up and shutting down the processes listed in the start profile, this service will also connect to shared memory segments to find out the status of work processes and the dispatcher.
When starting the system it will normaly first execute sapcpe.exe to replicate new executables from the central replication directory (DIR_CT_RUN) to the instance executable directory (DIR_EXECUTABLE).
If you provide a new kernel version to DIR_CT_RUN, it will copy and start a new disp+work.exe and sapstartsrv.exe to the local directory WHILE the old sapstartsrv.exe service executable is still running.
if the new disp+work.exe contains changes to shared memory structures (compared to the old one) the old sapstartsrv.exe will not be able to read them. Dispatcher - Running but Dialog Queue info unavailable is one result of it, unavailable work process information another one.
sapstartsrv.exe will detect that there is a new version of it's executable by comparing sapstartsrv.exe against sapstartsrv.exe.new (which have the same timestamp in DIR_CT_RUN) and will restart the service with the new executable after 5 minutes which will normaly. This automatically fixes the problem and is documented in windows application log (eventviewer).
Peter

Transfer rules are not exist for ECC Quality source system in BI Dev

Hi,
I Connected BI Dev system To ECC Dev and installed the sales, purchasing,... data flow, but here i am not getting the quality data to show the reports, to get Quality data I established the connection between BI Dev and ECC QA, while installing the transfer rules for the ECC QA data sources there no transfer rules are exist(only some of them exist) in the business content, but all the update rules,... are exist, when i right on the data source say create transfer rules it is proposing App praposal.
When i select source system as ECC dev while installing the transfer rules i can see all the transfer rules, but when i select source system as ECC QA i can see only some transfer rules.
only problem with transfer rules(some of them exist), for remaining all objects are properly existing in business content for ECC QA source system.
Regards,
chandra

Hi Fayzrakhmanov
Thanks for the quick reply. We are not moving the stuff to QA. We are only connecting QA ECC system to BI Dev. We already have datasources moved to ECC QA and created source system for ECC QA in BI Dev.
The problem is I am not able to get Business Content transful rule for new source system. We I can find some but not all unlike development.
Help on this would be appreciated.
Thanks

Enter a business location for ECC 6 EHP 5 (Taiwan)

Hi,
While releasing the billing doc to accounting we are getting the error Enter a business location
Message no. F5A192
We are working on ECC6 EHP 5 and this requirement is for Taiwan.
I have found the SAP Note; 376018, however this is valid for 4.6c ONLY.
Could you please check and advise is this note is valid for ECC 6 as well. Or do we need to apply any other notes.
Or any other suggestions.
Thanks & Regards,
Student.

Hi,
Please check the below thread.
Error Enter a Business Location for Korea
Regards,
P Gomatheeswaran

Jco for ECC 5.0 Unicode

Similar Messages

Maybe you are looking for