JCO Installation librfccm.dll file

Hi,
I am trying to install JCO before installing integraiton kit. I downloaded 2.1.9 and 3.0.6 versions but i could not find librfccm.dll file.
Where can i find it? Also should i install 64 bit or 32 bit version? i have 64 bit server 2008 operating system.

Use the 32bit version of JCO 2.1.9. There are 2 DLL files: librfc32.dll and sapjco.dll.
Copy those into <Windows installation directory>\SysWOW64
You should copy also the JAR file under <BOBJ installation directory>\Tomcat55\shared\lib. If the path does not exist, just create it. Restart the tomcat after copying the file and BEFORE starting the installation of the int.Kit.
Regards
Stratos

Similar Messages

Lync 2013 installation problem - dll file missing

Hi,
I've encountered this problem with Lync 2013 installation on 2 different computers.
Error message:
"perfboost.exe - System Error
The program can't start because appvisvsubsystems32.dll is missing from your computer. Try reinstalling the program to fix this problem."
The first time i got this error was while installing Lync 2013 (32-bit ver.) for a user with an E1 Office 365 plan and an Office 2013 Home and Business suite installed (32-bit version) on a 64-bit Win 7 Pro machine. The installation completed despite the
error message but Lync could not connect to the server saying that "the server for
domain.eu cannot be found". I tried the manual configuration with the same result. I'm confident it's not a DNS problem as other users within the same domain are using Lync 2013 with no connectivity issues.
The second time I got the error was when installing Lync 2013 on a new machine, also with Office 2013 H&B 32-bit and Lync 2013 32-bit downloaded from the user's Office 365 account (also plan E1). The installation also completed but I had no problems
logging the user in (it's another user, same domain)
Anyone has a clue about this? Should I install the 64-bit Lync version instead? Would it conflict with the 32-bit Office 2013?
Thanks.
Luka

Hi Teklace,
The issue is more related to Office, You may repair Office 2013 using the following link and check if it works fine as expected:
https://support.office.com/en-us/article/Repair-an-Office-application-7821d4b6-7c1d-4205-aa0e-a6b40c5bb88b?ui=en-US&rs=en-US&ad=US
Some similar cases for your reference.
https://social.technet.microsoft.com/Forums/office/en-US/4fdea64f-e7c8-4e08-95b2-fb54984d617f/appvisvsubsystems32dll-error?forum=officesetupdeploy
http://answers.microsoft.com/en-us/office/forum/officeonline-word_online/appvisvsubsystems32dll/75c4067b-d23f-4d50-bd23-82934852fed8
http://answers.microsoft.com/en-us/office/forum/office_365hp-office_install/appvisvsubsystem32dll/106805c1-5928-4a7e-a8b7-6c438e279969
If the error still exists, to ensure you get better support, I suggest you turn to our Office forum for dedicated support. With the assistance provided there, it is more likely the issue can
be resolved. Sorry for any inconvenience this caused. Thanks for your understanding.
https://social.technet.microsoft.com/Forums/office/en-US/home?category=officeitpro
Best regards,
Eric

Dll files download ?

Hi,
I am trying an example program to call a BAPI from java servlet. To accomplish this I need sapjco.dll, jco.jar, jrfc12.dll files.
I understand I can download thes files from service market place website. Could any one pls point me to the exact path in service market place, where I could download these files.
Thank you.
Best Regards
Ayub.

Hi ayub
Go to the shortcut https://service.sap.com/swdc and search for JCO . You will get the complete file with pdf help file which will help you with the installation process
hope this helps. please do not forget to reward points
regards
rajeshkr

Updated itunes, error message about mobile popped up during installation, then after installation, tunes will not start. gives error that a dll file is missing.

I downloaded the new Itunes version. During installation, there was an error message that said no Mobile access. After installation, Itunes would not open. Gave an error message that a DLL file was not found. Removed itunes from computer and initiated new download. Same problem with new download. Still does not open. I'm stumped. I have over 30,000 files in itunes and use it every day HELP

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

TS3212 Unable to instal Itunes in Windows 7 for want of a DLL file / installer error

Can anyone help me in installing the latest itunes. I have downloaded the setup file. When I try to instal, installation fails forwant of a DLL file / error in installer package. What should I do to successfully instal.
I have been using Itunes for so many years. But recently I formatted my laptop and installed the new OS, Windows 7. Previously I was using Windows XP, I did not have problem.
Is there any solution by enabling or disabling any of the service features under administrative tools in the control panel ?

Although you're getting a different error message, try the procedure from the following user tip with that one:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

Despite my best efforts, I am unable to remove iTunes 11.1.4 from my PC, this being made necessary because the original installation had a flaw and did not load properly. Effor to use the control panel, deleting dll. files, etc. all failed. iTune out??

Despite my best efforts, I am unable to remove iTunes 11.1.4 from my PC, this being made necessary because the original installation had a flaw and did not load properly. Effor to use the control panel, deleting dll. files, etc. all failed. And, of course, on startup, a window opens with the error and tells me find QTMovie.dll and delete it because this may be the source of the hangup. Also, in trying to delete iTunes, I get the additional message that I must get approval from the System Administrator to take this action. I am the System Administrator.
Any ideas would be welcomed.
Thank you.
James
<E-mail Edited by Host>

Thank you for asking this question. I'm having the same issues.
Liz

ITunes Installer Interrupted, missing MSVCR80.dll files

Hi, I hope someone can help me.
I was downloading iTunes and got the error message that iTunes couldn't download because the MSVCR80.dll files were missingand so iTunes could not install.
After trying to download repeatedly and repair I finally uninstalled iTunes and tried to re-install it.
The message I got was:
iTunes Installer Interrupted
Errors occured during installation before the requested operations for iTunes could be completed.
Your system has not been modified. To complete the installation, run the installer again
Click finish to exit the installer
Help please!

See Troubleshooting issues with iTunes for Windows updates.
tt2

I have uninstalled and reinstalled the new iTunes but it still will not work. I keep getting the error mesage relating to MSVCR80.dll, the installation error 7 (windows error 126). I have tried moving and removing the dll files including the QTMovie dll

I have tried uninstalling and reinstalling iTunes 15 times regarding the latest release and still get the MSVCR80.dll and Error 7 (Windows error 126) messages.
I have tried moving the dll filesincluding the QTMovie dll file to now avail. Can anyone please help, as I am sure you all, like me, have thousnads of dollars and songs invested in this system and need a fix fast. Can anyone please help???

Dear avid iTunes users - I have cracked it!!!
The response from Apple/iTunes was extremely poor and did not solve the problem.
I have a look in msconfig and observed which applications/services were running - one of which was the 'Apple Application Support'
So ... I had a look at what was in this folder and found the APS Daemon.exe file causing all the trouble.
So ... I simply deleted the Apple folder found in C:\program files\common files\.
I did a restart and did not get the MSCVCR80.dll or Error 7 (windows 126) error messages.
I reinstalled the current version of iTunes (for the 16th time!)
Hey presto!!!
IT WORKED :-O Woooohooo!!!
So ... to all those smarty-pants boffin-brianiacs out there (apple/iTunes): this is how you do it!!!!!!!!!!
YOU DO NOT NEED TO UNINSTALL ALL THE APPLE/QUICKTIME OR RELATED PROGRAMS - JUST DELETE THE APPLE FOLDER IN THE C:\PROGRAM FILES DIRECTORY.
Nuff said.

I have windows 8, 64 bit. I am trying to install ITunes 64 bit installer, but keep getting an error message that says a .DLL file is missing. How can I fix this?

After installing, whenever i try to open the application, it keeps popping up that some or the other .dll file is missing.
When I install that particular .dll file and then again try to re open, it says that someother file is missing. It keeps
coming all the time.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Help!! I need librfccm.dll

Hi,
After installing Edge XI3.1 , i can't find "SAP" in Authentication page of CMC.
I think I need to put sapjcorfc.dll and librfccm.dll in system directory.
I got sapjcorfc.dll.
Where can I get librfccm.dll ?
Thanks a lot.

You mean, librfccm.dll isn't required for my environment?
Installation guide says , I need to confirm there are librfccm.dll and sapjcofrc.dll in the %windir%system32.
If you know, could you tell me where I can get libfrccm.dll? I'll try to put the file in my environment.
Thanks a lot.
Edited by: Project Jinji on Jul 3, 2010 11:26 AM
Edited by: Project Jinji on Jul 3, 2010 11:26 AM

Content Server 6.40 Presents a Save As dialog for ContentServer.dll file

hi All
we have installed successfully the content server 6.40 on a windows 2008 with iis 7 environment. The installation wen successfully with no errors. however when we run a test by calling the URL http://<server>:<port>/ContentServer/ContentServer.dll?serverInfo URL, instead of getting a response, we are getting a save as file dialog to save the dll file. Also, after the installation, even with the install website tick checked, the website was not installed. we had to do the installation of the website manually for the port.
With content server 620 on windows 2000 this was never the case
if anywone has an idea on how to resolve the issue, please advice
Regards
Ronny

GOT the Solution
to anyone else who could be going through the same issue, see if the solution below solves your issue
The website should get created if all the roles in IIS 7.0 are installed. Therefore, please try to install the IIS 7.0 by selecting
all the roles followed by installation of the SAP Content Server. By doing so, websites should be created automatically.
In the IIS 7.0, all the roles are not selected during the installation by default. Please make sure all the below roles are included and IIS 7.0 is installed, as per the installation manual for the Content Server on Windows 2008:
Roles needed in IIS 7.0.
Common HTTP Features
Static Content
Default Document
Directory Browsing
HTTP Errors
HTTP Redirection
Application Development
ISAPI Extensions
ISAPI Filters
Health and Diagnostics
HTTP Logging
Logging Tools
Request Monitor
Tracing
Custom Logging
ODBC Logging
Security
Basic Authentication
Windows Authentication
Request Filtering
Note : Anonymous Authentication should be enabled which is done by
default.
Performance
Static content Compression
Dynamic Content Compression
Management Tools
IIS Management Console
IIS Management Scripts and Tools
Management Service
IIS 6 Management Compatibility
IIS 6 Metabase compatibility
IIS 6 WMI Compatibility
IIS 6 Scripting Tools
IIS 6 Management Console
I hope it helps someone!

Problem registering CremePie.dll file

Hi All,
I am working with signature capture in standard MAM. I am trying to run the standard signature capture functionality in PDA. I have deployed mamsignapplet.cab and
signaturecapture.cab files in side WEB-INF\signature folder.
In SAP Note 897289, I read that we need to register the some dll files in PDA, so that the browser will supports the applets in it.
Also in the same document it was mentioned like
For CrEme versions 3.25, 3.26 and 3.27a there is an acknowledged by NSICOM
bug as plug-in registration link contains wrong dll path for those
versions. Copy/Paste both "Register/Unregister Plug-In" files from
\Windows\CrEme\Demos to your desktop with the help of ActiveSync, open both
dlls and change the existing line with the following
\windows\regsvrce.exe \windows\creme\bin\CremePie.dll.
I have copied Register Plugin/Unregister Plugin files to my desktop and tried to edit them. But they saved as shorcut and I could not edit them. I have checked the properties of that file. There file type is Shortcut and target is \windows\regsvrce.exe CremePie.dll.
Can any body please tell me how to edit this file or can we create this file.
Regards
Murthy

Hi,
for that I use the software "total commander" from http://www.ghisler.com/ running directly on the PDA. This gives me the ability to edit the file on the PDA.
Please see if REGSVRCE.EXE is available in your windows directory. Some verndors do not deliver that file, cause it is not supported as standard CE file. If this is the case, download the .NET SDK for CE. This installs the file on the PC in the WINCE500 directory - you can download it from there to the device then.
I hope this helps to solve the issue!
Regards,
Oliver

HT1925 I am having an issue with loading Itunes. I receive a missing dll file notice. Then another error message. I have reinstalled Windows & still get the error. I did not get the error until I recently did an ITunes update.

I am having an issue with ITunes after a recent ITunes update. I can not open ITunes, I get a message missing MSVCR80.dll file, Then an error 7 message. I have redone the OS for Windows 7 and restarted the computer. I keep getting the errors.

Do the following:
Uninstall from Windows the following five programs: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application Support. You do this from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Download the latest version of iTunes from Apple and note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator, just Right click iTunes installer and Run as Administrator.

Unable to install ituns on windows 7 64 missing .dll file

Unable to install ituns on windows 7 64. Installer states missing .dll file.

Here is a solution that worked for a user who also had a problem with iTunes Software Support. This thread was for a win32 version, but Maybe this is the problem for both of you?:
IT appears that AppleApplicationSupport.msi, is not opening and installing properly.
Download and SAVE iTunesSetup.exe, where you can find it.
Then:
1. Download and install WinRAR.
2. Right-click the iTunesSetup.exe icon and choose "Open with WinRAR".
3. Once the EXE is opened in WinRAR, double-click AppleApplicationSupport.msi and when the installer window is open choose "Repair".
4. Done! You can now run iTunes normally.
Here is a link to that fairly lengthy thread.. http://discussions.info.apple.com/thread.jspa?threadID=2151777&tstart=-1

Missing mscrv80.dll file when updating itunes. what is it and how can I get it back?

When updating itunes the new installation said I was missing mscrv80.dll file. I've reinstalled but still doesn't work. How can it be repaired?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

JCO Installation librfccm.dll file

Similar Messages

Maybe you are looking for