JCO monitor creation error

Hi all,
I'm trying to configure the Mobile administrator. For this I've followed all the steps in the SAP library regarding this.
But, when I try to activate the two JCO monitors: ME_MONITORS_MODELDATA_DEST and ME_MONITORS_METADATA_DEST, I simply can't do it.
The system dosn't give any error message but although I try to create them and follow all the screens, at the end the status of both of them remains in red (not created).
What could be the error??
Thank you!!
Best Regards,

Thank you!!
With this guide I managed to start the JCO monitors succesfully. However, there is a step that this guide does not include to correctly configure the Mobile administrator and is the JRA configuration.
After all I configurated correctly the Mobile Administrator.
Thanks again.
Best regards,

Similar Messages

  • Random JCO Communication Failure Error after Hardware Migration

    Greetings experts,
    we had a migrated our XI server to new hardware and had couple of SLD related issues which were solved by the migration team. However, we are getting JCO communication failure very frequent whenever we use JCO from JAVA to call an RFC. The weird thing, if you restarted the message it will be successful.
    The error message in the message monitor :
    "COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection"
    Any idea to solve this random issue?

    Hi again,
    the number of connection was increased to 200 but with no effects. Also, the user used to connect is a system user which does not need a ticket.
    This is my connection code
                   mConnection = JCO.createClient("600", // Client
              "USER", // Username
              "PASSWORD", // Password
              "EN", // Language
              "hostname", // Host
              "01"); // System Number
    do I need to add anything else if I am using a clustered system?

  • Request creation error for mitigation control workflow

    Dear Expert,
             I had activiate the workflow from RAR to CUP on Mitigated User assignment, I had completed following customizing:
    1)RAR->configaration->Workflow
    2)CUP->configaration->initiator, stage, path.
    but when I created mitigated user assignments in RAR, after click "Submit", error popup: "Request creation error"
    can some one help?
    thanks!

    Dear,
         the log is below:
    ERROR       service 'SAPGW00' unknown
    TIME        Thu May 20 13:33:16 2010
    RELEASE     701
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -3
    MODULE      niuxi.c
    LINE        1732
    DETAIL      NiPGetServByName2: service 'SAPGW00' not found
    SYSTEM CALL getservbyname_r
    COUNTER     375
    May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
    INFO: Exception in Server YYY:
    com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
    This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
    Could not start server: Connect to SAP gateway failed
    Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
    ERROR       service 'SAPGW00' unknown
    TIME        Thu May 20 13:33:16 2010
    RELEASE     701
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -3
    MODULE      niuxi.c
    LINE        1732
    DETAIL      NiPGetServByName2: service 'SAPGW00' not found
    SYSTEM CALL getservbyname_r
    COUNTER     375
    May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
    INFO: Exception in Server YYY:
    com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
    This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
    Could not start server: Connect to SAP gateway failed
    Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
    ERROR       service 'SAPGW00' unknown
    TIME        Thu May 20 13:33:16 2010
    RELEASE     701
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -3
    MODULE      niuxi.c
    LINE        1732
    DETAIL      NiPGetServByName2: service 'SAPGW00' not found
    SYSTEM CALL getservbyname_r
    COUNTER     375
    May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
    INFO: Exception in Server YYY:
    com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
    This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
    Could not start server: Connect to SAP gateway failed
    Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
    ERROR       service 'SAPGW00' unknown
    TIME        Thu May 20 13:33:16 2010
    RELEASE     701
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -3
    MODULE      niuxi.c
    LINE        1732
    DETAIL      NiPGetServByName2: service 'SAPGW00' not found
    SYSTEM CALL getservbyname_r
    COUNTER     375
    May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
    INFO: Exception in Server YYY:
    com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
    This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
    Could not start server: Connect to SAP gateway failed
    Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
    ERROR       service 'SAPGW00' unknown
    TIME        Thu May 20 13:33:16 2010
    RELEASE     701
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -3
    MODULE      niuxi.c
    LINE        1732
    DETAIL      NiPGetServByName2: service 'SAPGW00' not found
    SYSTEM CALL getservbyname_r
    COUNTER     375
    May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
    INFO: Exception in Server YYY:
    com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
    This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
    Could not start server: Connect to SAP gateway failed
    Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
    ERROR       service 'SAPGW00' unknown
    TIME        Thu May 20 13:33:16 2010
    RELEASE     701
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -3
    MODULE      niuxi.c
    LINE        1732
    DETAIL      NiPGetServByName2: service 'SAPGW00' not found
    SYSTEM CALL getservbyname_r
    COUNTER     375
    May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
    INFO: Exception in Server YYY:
    com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
    This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
    Could not start server: Connect to SAP gateway failed
    Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
    ERROR       service 'SAPGW00' unknown
    TIME        Thu May 20 13:33:16 2010
    RELEASE     701
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -3
    MODULE      niuxi.c
    LINE        1732
    DETAIL      NiPGetServByName2: service 'SAPGW00' not found
    SYSTEM CALL getservbyname_r
    COUNTER     375
    May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
    INFO: Exception in Server YYY:
    com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
    This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
    Could not start server: Connect to SAP gateway failed
    Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
    ERROR       service 'SAPGW00' unknown
    TIME        Thu May 20 13:33:16 2010
    RELEASE     701
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -3
    MODULE      niuxi.c
    LINE        1732
    DETAIL      NiPGetServByName2: service 'SAPGW00' not found
    SYSTEM CALL getservbyname_r
    COUNTER     375
    May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
    INFO: Exception in Server YYY:
    com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
    This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
    Could not start server: Connect to SAP gateway failed
    Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
    ERROR       service 'SAPGW00' unknown
    TIME        Thu May 20 13:33:16 2010
    RELEASE     701
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -3
    MODULE      niuxi.c
    LINE        1732
    DETAIL      NiPGetServByName2: service 'SAPGW00' not found
    SYSTEM CALL getservbyname_r
    COUNTER     375
    May 20, 2010 1:33:16 PM com.virsa.cc.common.SAPAdapter serverExceptionOccurred
    INFO: Exception in Server YYY:
    com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu May 20 13:33:16 CST 2010.
    This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 3600 seconds.
    Could not start server: Connect to SAP gateway failed
    Connect parameters: TPNAME=YYY GWHOST=visoil01 GWSERV=SAPGW00
    ERROR       service 'SAPGW00' unknown
    TIME        Thu May 20 13:33:16 2010
    RELEASE     701
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -3
    MODULE      niuxi.c
    LINE        1732
    DETAIL      NiPGetServByName2: service 'SAPGW00' not found
    SYSTEM CALL getservbyname_r
    COUNTER     375
    May 20, 2010 2:10:50 PM com.virsa.cc.workflow.bo.WorkflowBO submit
    INFO: END POOINT URL: http://9.186.143.129:50100/AEWFRequestSubmissionService_5_2/Config1?style=document
    May 20, 2010 2:10:50 PM com.virsa.cc.workflow.bo.WorkflowBO submit
    INFO: before submit:
    May 20, 2010 2:10:50 PM com.virsa.cc.workflow.bo.WorkflowBO submit
    INFO: wftype: MITIOBJ reqid: GRC01
    May 20, 2010 2:10:50 PM com.virsa.cc.rulearchitect.dao.dto.MitObjDTO getObjContext
    FINEST: validfrom: 2010-05-20 validto: 2011-05-20
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Data Type: String
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Descripton: MITREFNO
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Name: MOMITREFNO
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Value: CT01
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Data Type: String
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Descripton: RISKID
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Name: MORISKID
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Value: ZC02
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Data Type: String
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Descripton: LANG
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Name: LANG
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Value: EN
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Data Type: String
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Descripton: MONITORID
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Name: MONITORID
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Value: GRC01
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Data Type: Integer
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Descripton: STATUS
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Name: MOSTATUS
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Value: 0
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Data Type: DATE
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Descripton: VALIDFROM
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Name: VALIDFROM
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Value: 05/20/2010
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Data Type: DATE
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Descripton: VALIDTO
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Name: VALIDTO
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Value: 05/20/2011
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Data Type: String
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Descripton: BU ID
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Name: BUID
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Value: null
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Data Type: String
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Descripton: Approver ID
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Name: MOAPPROVERID
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Value: null
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Data Type: String
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Descripton: OBJTYPE
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Name: OBJTYPE
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Value: U
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Data Type: String
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Descripton: OBJID
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Name: OBJID
    May 20, 2010 2:10:50 PM com.virsa.cc.xsys.aewf.SubmitAEWorkflow setProcessContext
    INFO: Value: 207471
    May 20, 2010 2:10:50 PM com.virsa.cc.workflow.bo.WorkflowBO submit
    INFO: Return code: 2010 Message: com.virsa.ae.core.ObjectNotFoundException: Invalid Priority Value : MO_HIGH workflow id: null Status: null
    May 20, 2010 2:10:50 PM com.virsa.cc.workflow.bo.WorkflowBO submit
    WARNING: 2010: null

  • Download Helper, even with paid converter upgrade, gives "Invalid Capture File" errors and will not record audio, with "File Creation Error - Unable to rename/copy audio file" Error.

    Download Helper Screen Capture worked to capture video if the default "no audio" option is active. But, no audio. The "speakers" or "microphone" audio options are confusing....the audio to be captured is from the video, so what do you choose? With either "speakers" or "microphone" selected, the captured file has poor audio and no video. Re-capture efforts (speakers) get "Invalid capture file error" and "File Creation error- Unable to rename/copy audio file"
    The paid upgrade of "Converter" doesn't work.
    Instructive documentation - not very good.
    Suggestions - Need time delay between initiation of "Record" and starting the video to be recorded.
    Could use timer tracking of the record process.
    Are there operating system limitations? (Have Windows XP Pro)

    That is an issue for the developer of that Download Helper.

  • Service Contracts Billing Schedule Creation Error

    Hi,
    I have a requirement of creating service contracts from back-end for which I am using the oks_contracts_pub.create_contract_header, create_service_line, and create_bill_schedule. I am creating my contracts with active status and renewal type of EVN (Header level), FUL(Line Level). My contract is of type subscription. The contract header and line are creating fine but the Bill schedule API is throwing an UNEXPECTED ERROR. The billing schedules need to be created based on accounting rule which can be quarterly or monthly. I have included the bill schedule code (hard coded values) for review. Any help is greatly appreciated.
    Also the version I am working on is R12
    ________________________________________________CODE___________________________________________________________________
    CREATE OR REPLACE PROCEDURE BILLING_SCHEDULE AS
    l_strm_level_tbl OKS_BILL_SCH.STREAMLVL_TBL;
    v_bill_qtrs NUMBER := 0;
    v_bill_mths NUMBER := 0;
    v_bill_days NUMBER := 0;
    v_net_amount NUMBER := 468;
    v_acct_rule_name VARCHAR2(50) := 'QUARTERLY';
    v_amt_per_day NUMBER;
    x_error_locator VARCHAR2(2000);
    v_start_date DATE := '04-MAY-2010';
    v_end_date DATE := '25-MAY-2010';
    x_return_status VARCHAr2(3);
    x_msg_count NUMBER;
    x_msg_data VARCHAR2(2000);
    v_billing_sequence NUMBER;
    x_chr_id NUMBER := 17000;
    x_line_id NUMBER := 223248604345353294444923586786456728480;
    g_day_uom VARCHAR2(10) := 'DAY';
    g_month_uom VARCHAR2(10) := 'MTH';
    g_quarter_uom VARCHAR2(10) := 'QTR';
    v_amt NUMBER;
    v_invoicing_rule_id NUMBER := -2;
    BEGIN
    --Create Billing Schedule based on accounting rule
    okc_context.set_okc_org_context;
    MO_GLOBAL.INIT('OKS');
    MO_GLOBAL.SET_POLICY_CONTEXT('S', 83);
    v_bill_qtrs := 0;
    v_bill_days := 0;
    v_bill_mths := 0;
    SELECT NVL(v_net_amount, 0)/(v_end_date - v_start_date)
    INTO v_amt_per_day
    FROM dual;
    dbms_output.put_line('Calculated amt per day ' || v_amt_per_day);
    IF v_acct_rule_name LIKE '%QUARTERLY%' THEN
    --Quarterly billing schedule
    SELECT FLOOR(MONTHS_BETWEEN( v_end_date,
    v_start_date)/3),
    v_end_date - ADD_MONTHS(v_start_date, (FLOOR(MONTHS_BETWEEN(v_end_date, v_start_date)/3)*3))
    INTO v_bill_qtrs,
    v_bill_days
    FROM dual;
    dbms_output.put_line('Calculated the qtrs and days');
    IF v_bill_qtrs > 0 THEN
    SELECT (ADD_MONTHS(v_start_date, (FLOOR(MONTHS_BETWEEN(v_end_date, v_start_date)/3)*3)) - v_start_date)*v_amt_per_day
    INTO v_amt
    FROM dual;
    dbms_output.put_line('Calculated qtr amt');
    SELECT NVL(MAX(sequence_no), 0) + 1
    INTO v_billing_sequence
    FROM oks_stream_levels_b
    WHERE dnz_chr_id = x_chr_id
    AND cle_id = x_line_id;
    --Populating the stream line variables
    l_strm_level_tbl(v_billing_sequence).sequence_no := v_billing_sequence;
    l_strm_level_tbl(v_billing_sequence).dnz_chr_id := x_chr_id;
    -- l_strm_level_tbl(v_billing_sequence).id := x_line_id;
    l_strm_level_tbl(v_billing_sequence).cle_id := x_line_id;
    l_strm_level_tbl(v_billing_sequence).uom_code := g_quarter_uom;
    l_strm_level_tbl(v_billing_sequence).uom_per_period := 1;
    l_strm_level_tbl(v_billing_sequence).level_periods := v_bill_qtrs;
    l_strm_level_tbl(v_billing_sequence).start_date := v_start_date;
    l_strm_level_tbl(v_billing_sequence).end_date := v_end_date;
    l_strm_level_tbl(v_billing_sequence).invoice_offset_days := NULL;
    l_strm_level_tbl(v_billing_sequence).amount := v_amt/v_bill_qtrs;
    l_strm_level_tbl(v_billing_sequence).level_amount := v_amt/v_bill_qtrs;
    l_strm_level_tbl(v_billing_sequence).lines_detailed_yn := 'Y';
    l_strm_level_tbl(v_billing_sequence).due_arr_yn := 'Y';
    dbms_output.put_line('Before calling the Bill Sch API for QTR');
    OKS_CONTRACTS_PUB.CREATE_BILL_SCHEDULE ( p_billing_sch=>'E',
    p_strm_level_tbl=>l_strm_level_tbl,
    p_invoice_rule_id=>v_invoicing_rule_id,
    x_return_status=>x_return_status);
    dbms_output.put_line('After calling the Bill Sch API for QTR');
    IF x_return_status <> 'S' THEN
    x_msg_count := 1;
    dbms_output.put_line('Quarterly schedule creation error ' || x_msg_data);
    ---DBMS_TRANSACTION.ROLLBACK_SAVEPOINT('OKS_A');
    -- RETURN;
    END IF;
    END IF;
    IF v_bill_days > 0 THEN
    SELECT NVL(MAX(sequence_no), 0) + 1
    INTO v_billing_sequence
    FROM oks_stream_levels_b
    WHERE dnz_chr_id = x_chr_id
    AND cle_id = x_line_id;
    dbms_output.put_line('sequence '||v_billing_sequence);
    --Populating the stream line variables
    l_strm_level_tbl(v_billing_sequence).sequence_no := v_billing_sequence;
    l_strm_level_tbl(v_billing_sequence).dnz_chr_id := x_chr_id;
    --l_strm_level_tbl(v_billing_sequence).id := x_line_id;
    l_strm_level_tbl(v_billing_sequence).cle_id := x_line_id;
    l_strm_level_tbl(v_billing_sequence).uom_code := g_day_uom;
    l_strm_level_tbl(v_billing_sequence).uom_per_period := v_bill_days;
    l_strm_level_tbl(v_billing_sequence).level_periods := 1;
    l_strm_level_tbl(v_billing_sequence).start_date := v_start_date;
    l_strm_level_tbl(v_billing_sequence).end_date := v_end_date;
    l_strm_level_tbl(v_billing_sequence).invoice_offset_days := NULL;
    l_strm_level_tbl(v_billing_sequence).amount := v_net_amount;--v_amt_per_day*v_bill_days;
    l_strm_level_tbl(v_billing_sequence).level_amount := v_net_amount;--v_amt_per_day*v_bill_days;
    l_strm_level_tbl(v_billing_sequence).lines_detailed_yn := 'Y';
    l_strm_level_tbl(v_billing_sequence).due_arr_yn := 'Y';
    dbms_output.put_line('Before calling the Bill Sch API for QTR days');
    OKS_CONTRACTS_PUB.CREATE_BILL_SCHEDULE ( p_billing_sch=>'E',
    p_strm_level_tbl=>l_strm_level_tbl,
    p_invoice_rule_id=>v_invoicing_rule_id,
    x_return_status=>x_return_status);
    dbms_output.put_line('After calling the Bill Sch API for QTR days ' || v_bill_days || ' ' || x_return_status);
    IF x_return_status <> 'S' THEN
    x_msg_count := 1;
    dbms_output.put_line('Day schedule, for quarterly accounting rule, creation error ' || x_msg_data);
    --DBMS_TRANSACTION.ROLLBACK_SAVEPOINT('OKS_A');
    --RETURN;
    END IF;
    END IF;
    ELSE
    --Monthly billing schedule
    SELECT FLOOR(MONTHS_BETWEEN( v_end_date,
    v_start_date)),
    v_end_date - ADD_MONTHS(v_start_date, FLOOR(MONTHS_BETWEEN(v_end_date, v_start_date)))
    INTO v_bill_mths,
    v_bill_days
    FROM dual;
    dbms_output.put_line('Calculated the mths and days');
    IF v_bill_mths > 0 THEN
    SELECT (ADD_MONTHS(v_start_date,FLOOR(MONTHS_BETWEEN(v_end_date, v_start_date))) - v_start_date)*v_amt_per_day
    INTO v_amt
    FROM dual;
    dbms_output.put_line('Calculated the mths amt');
    SELECT NVL(MAX(sequence_no), 0) + 1
    INTO v_billing_sequence
    FROM oks_stream_levels_b
    WHERE dnz_chr_id = x_chr_id
    AND cle_id = x_line_id;
    --Populating the stream line variables
    l_strm_level_tbl(v_billing_sequence).sequence_no := v_billing_sequence;
    l_strm_level_tbl(v_billing_sequence).dnz_chr_id := x_chr_id;
    --l_strm_level_tbl(v_billing_sequence).id := x_line_id;
    l_strm_level_tbl(v_billing_sequence).cle_id := x_line_id;
    l_strm_level_tbl(v_billing_sequence).uom_code := g_month_uom;
    l_strm_level_tbl(v_billing_sequence).uom_per_period := 1;
    l_strm_level_tbl(v_billing_sequence).level_periods := v_bill_mths;
    l_strm_level_tbl(v_billing_sequence).start_date := v_start_date;
    l_strm_level_tbl(v_billing_sequence).end_date := v_end_date;
    l_strm_level_tbl(v_billing_sequence).invoice_offset_days := NULL;
    l_strm_level_tbl(v_billing_sequence).amount := v_amt/v_bill_mths;
    l_strm_level_tbl(v_billing_sequence).level_amount := v_amt/v_bill_mths;
    l_strm_level_tbl(v_billing_sequence).lines_detailed_yn := 'Y';
    l_strm_level_tbl(v_billing_sequence).due_arr_yn := 'Y';
    dbms_output.put_line('Before calling the Bill Sch API for MTHS');
    OKS_CONTRACTS_PUB.CREATE_BILL_SCHEDULE ( p_billing_sch=>'E',
    p_strm_level_tbl=>l_strm_level_tbl,
    p_invoice_rule_id=>v_invoicing_rule_id,
    x_return_status=>x_return_status);
    dbms_output.put_line('After calling the Bill Sch API for MTHS');
    IF x_return_status <> 'S' THEN
    x_msg_count := 1;
    dbms_output.put_line('Monthly schedule creation error ' || x_msg_data);
    --DBMS_TRANSACTION.ROLLBACK_SAVEPOINT('OKS_A');
    --RETURN;
    END IF;
    END IF;
    IF v_bill_days > 0 THEN
    SELECT NVL(MAX(sequence_no), 0) + 1
    INTO v_billing_sequence
    FROM oks_stream_levels_b
    WHERE dnz_chr_id = x_chr_id
    AND cle_id = x_line_id;
    --Populating the stream line variables
    l_strm_level_tbl(v_billing_sequence).sequence_no := v_billing_sequence;
    l_strm_level_tbl(v_billing_sequence).dnz_chr_id := x_chr_id;
    --l_strm_level_tbl(v_billing_sequence).id := x_line_id;
    l_strm_level_tbl(v_billing_sequence).cle_id := x_line_id;
    l_strm_level_tbl(v_billing_sequence).uom_code := g_day_uom;
    l_strm_level_tbl(v_billing_sequence).uom_per_period := v_bill_days;
    l_strm_level_tbl(v_billing_sequence).level_periods := 1;
    l_strm_level_tbl(v_billing_sequence).start_date := v_start_date;
    l_strm_level_tbl(v_billing_sequence).end_date := v_end_date;
    l_strm_level_tbl(v_billing_sequence).invoice_offset_days := NULL;
    l_strm_level_tbl(v_billing_sequence).amount := v_amt_per_day*v_bill_days;
    l_strm_level_tbl(v_billing_sequence).level_amount := v_amt_per_day*v_bill_days;
    l_strm_level_tbl(v_billing_sequence).lines_detailed_yn := 'Y';
    l_strm_level_tbl(v_billing_sequence).due_arr_yn := 'Y';
    dbms_output.put_line('Before calling the Bill Sch API for MTH days');
    OKS_CONTRACTS_PUB.CREATE_BILL_SCHEDULE ( p_billing_sch=>'E',
    p_strm_level_tbl=>l_strm_level_tbl,
    p_invoice_rule_id=>v_invoicing_rule_id,
    x_return_status=>x_return_status);
    dbms_output.put_line('After calling the Bill Sch API for MTH days');
    IF x_return_status <> 'S' THEN
    x_msg_count := 1;
    dbms_output.put_line('Day schedule, for monthly accounting rule, creation error ' || x_msg_data);
    --DBMS_TRANSACTION.ROLLBACK_SAVEPOINT('OKS_A');
    --RETURN;
    END IF;
    END IF;
    END IF;
    COMMIT;
    EXCEPTION
    when others then
    dbms_output.put_line('Error ' || sqlerrm);
    END;
    Thanks,
    Yash.

    Hi There,
    I have a similar requirement to create rental service contracts and create billing schedules.
    Can you please pass on your functional docs so that i can refer to them.
    Thanks,
    Raidu

  • Error in BPM: "COMMUNICATION FAILURE" during JCo call. Error opening an RFC

    hello experts
    i am receiving the above error incase of BPM scenario where i am having a Transform step and synchronous RFC step.
    i referred to the few threads discussing such problems and was trying to find whether my mapping is correct and i tested my mappings using my payload which looks good.
    When looked into the Mapping trace of the BPM "Show container" i found error ""COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection" and it seems that when BPM is attempting to call interface mapping it is throwing this error.
    Thanks in advance.
    Regards
    rajeev

    hi,
    I think no problen with the mapping part,
    jco connection requird when xi try to stablish the connection with the adapter .
    please look the link provided.
    Setup and test SAP Java Connector outbound connection
    please also check the following parameter at the exchange profile
    com.sap.aii.rwb.server.centralmonitoring.r3.ashost
    com.sap.aii.rwb.server.centralmonitoring.r3.client
    com.sap.aii.rwb.server.centralmonitoring.r3.sysnr
    com.sap.aii.rwb.server.centralmonitoring.httpport
    these parameter must be given properly.
    if every thing is ok than and problem still exist than try to restart the system.
    for us after restarting its worked fine.
    regards,
    navneet

  • Monitor input error

    Moved recently and Gateway 3250S, reconnected monitor input error showed up on monitor. Computer doctor did virtual diagnostic and said it was the graphics card. Plus fan wasn't working. Sent specs to purchase return hp Pavilion 6000 pro.MXLO180WRK. Bought & set up the desktop yesterday 7/9/15 with appropriate chords. Turned monitor first, then cpu. Received same error message: Monitor input error. Monitor going to sleep. As per where I bought computer switched out chords and monitors. Still same error.  Where purchased hp suggested I bring everything in and they'll do a diagnostic. That involves renting a car & finding the time.

    The standard Blue & White G3 has a 15-pin 3-row connector that connects to most third-party monitors. So cable adapters should not be the issue here.
    There are two places that hold onto the screen resolution. The first is the PRAM, backed up by the PRAM backup/clock battery. If you have had a power failure or pulled the main power plug, and are now having this trouble, that battery is the prime suspect. I suggest you open the side door on the Mac, find the tiny button nearest the battery, and press and hold it for a quarter minute. then allow at least 5 seconds to pass before you attempt to power up. If the symptoms change, consider replacing the battery.
    The other place the display resolution is stored is in a Preference file. To accommodate an environment with multiple users on multiple computers, the display setting used after you log in is stored in:
    Hard Drive / Users / your_id / Library / Preferences / By Host / com.apple.preference.displays.yourHWAddress.plist
    If you can boot to a different software source such as a System CD, you can both bypass the bad value stored in that preference file and gain access to that preference file to move it to another location (which will inactivate it).

  • Delivery Note to Subcontract creation error "Essential transfer parameters

    Hi
    I am facing issue in return delivey
    Delivery Note to Subcontract creation error "Essential transfer parameters are missing in record:000001".
    Could you please let me know the casue of this error and where exactly i can see error.
    Regards
    vikcy

    Hi Vicky,
                   Check If the Customer number(Plant) has been maintained in the vendor master record control data and the vendor should also be maintained in the customer master data. Once you maintain this system determines the shipping point based on the  customer master and the shipping data missing. Kindly try delivering after maintaining these and let me know If you need any more information on this.
    Regards
    Ram Pedarla

  • Jco connection Test error

    Hi Exports,
      When I test the Jco connection below error message getting,
    com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM  TYPE=B MSHOST=csslecc GROUP=SPACE R3NAME=ECC MSSERV=sapmsECC PCS=1 ERROR       service 'sapmsECC' unknown TIME        Fri Aug 28 04:38:05 200 RELEASE     700 COMPONENT   NI (network interface) VERSION     38 RC          -3 MODULE      ninti.c LINE        530 DETAIL      NiPGetServByName2: service 'sapmsECC' not found SYSTEM CALL getservbyname_r COUNTER     1
    Kindly help me to solve this problem.
    Thanks
    Jibin.

    Hi Jibin
    This is mostly likely due to JCO or network setup rather than the ESS/MSS application
    Please see the following link
    http://help.sap.com/saphelp_nw2004s/helpdata/en/f6/daea401675752ae10000000a155106/frameset.htm
    In particular check network services as per note
    Note 52959 - sapms..., sapdp.., sapgw.. unknown (or not found)   
    Please check JCO connection settings as well  as per
    Note 723562 - SAP Java Connector: Configuration and Requirements 
    Please check availability of message server and that user terminal can ping Portal server
    and Portal server can ping ECC server
    Hope this helps
    Best wishes
    Stuart

  • Child creation Error on vms HELP

    Hi,
    Iam trying to execute a file from withing a java program on VMS This is my code
    public class BAMBOE {
      public static void main(String[] args) { 
        BamboeRunner boe = new BamboeRunner();
        boe.start();
    import java.io.*;
    public class BamboeRunner extends Thread implements Runnable { 
      public void run() {
        try {
          Process process = Runtime.getRuntime().exec("@SIMPEL");
          process.waitFor();
          return ;
        catch (Exception e) {
          e.printStackTrace();
          return ;
    }But I keep getting the following error:
    java.io.IOException: Child creation error: error 100052
    VMS error code: error 100052
            at java.lang.UNIXProcess.<init>(Compiled Code)
            at java.lang.Runtime.exec(Compiled Code)
            at java.lang.Runtime.exec(Compiled Code)
            at BamboeRunner.run(Compiled Code)Anybody that can help me fix this problem please??

    I've managed to get somewhere with this...
    I've got it to work by having the system command I want to run in a com file and specifying the full path to that file in the exec method without the '@'...
    e.g.
    Process proc = Runtime.getRuntime.exec("ppoi_dev:[user.dba_ppoi.matt.proc]proc.com");
    where the file
    ppoi_dev:[user.dba_ppoi.matt.proc]proc.com
    contains
    $ dir
    When I run this I can get the output from the dir command by reading from the InputStream of the Process object.
    Have fun.

  • CUSTOM VIP CREATION ERROR

    Hi all, i have tried to define a new VIP on my ORACLE 11gR2 RAC cluster, in order to manage third-party component by using ORACLE Clusterware.
    I have used the info written on the ORACLE manual "Oracle Clusterware Administration and Deployment Guide E10717-04" at page 5-15.
    I have executed the command "/u01/app/grid/bin/appvipcfg create -network=1 -ip=xx.xxx.xxx.140 -vipname=appsVIP -user=root", as the manual says, from root user.
    My environment is AIX 6.1.
    Unfortunately, i get an error (reported following) but i am not able to solve it.
    Please, may you help me?
    Thanks
    Marco
    CUSTOM VIP CREATION ERROR
    [nodo01][]>/u01/app/grid/bin/appvipcfg create -network=1 -ip=xx.xxx.xxx.140 -vipname=appsVIP -user=root
    Production Copyright 2007, 2008, Oracle.All rights reserved
    2010-05-31 18:39:54: Creating Resource Type
    2010-05-31 18:39:54: Executing cmd: /u01/app/grid/bin/crsctl add type app.appvip.type -basetype cluster_resource -file
    /u01/app/grid/crs/template/appvip.type
    2010-05-31 18:39:55: Create the Resource
    2010-05-31 18:39:55: Executing cmd: /u01/app/grid/bin/crsctl add resource appsVIP -type app.appvip.type -attr
    USR_ORA_VIP=xx.xxx.xxx.,START_DEPENDENCIES=hard(ora.net1.network)
    pullup(ora.net1.network),STOP_DEPENDENCIES=hard(ora.net1.network),ACL='owner:root:rwx,pgrp:root:r-x,other::r--,user:root:r-x'
    CRS-0247: User name or group name is invalid
    CRS-4000: Command Add failed, or completed with errors.
    Command return code of 1 (256) from command: /u01/app/grid/bin/crsctl add resource appsVIP -type app.appvip.type -attr
    USR_ORA_VIP=xx.xxx.xxx.,START_DEPENDENCIES=hard(ora.net1.network)
    pullup(ora.net1.network),STOP_DEPENDENCIES=hard(ora.net1.network),ACL='owner:root:rwx,pgrp:root:r-x,other::r--,user:root:r-x'
    2010-05-31 18:39:56: ###### Begin Error Stack Trace ######
    2010-05-31 18:39:56: Package File Line Calling
    2010-05-31 18:39:56: --------------- -------------------- ---- ----------
    2010-05-31 18:39:56: 1: crsconfig_lib crsconfig_lib.pm 7474 crsconfig_lib::error
    2010-05-31 18:39:56: 2: main appvipcfg.pl 241 crsconfig_lib::system_cmd
    2010-05-31 18:39:56: 3: main appvipcfg.pl 93 main::config
    2010-05-31 18:39:56: 4: main appvipcfg.pl 74 main::process_arguments
    2010-05-31 18:39:56: ####### End Error Stack Trace #####
    ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    Hi,
    On Solaris 10 and Oracle Grid Infrastructure 11.2.0.2 did the following. Posting this as it might be useful to someone else. Installed Grid Infrastructure as oracle.
    As root:
    # ${GRID_HOME}/bin/appvipcfg create -network=1 -ip=<vip_address> -vipname=<vip_name> -user=root
    In the above command, if you are wondering what -network=1 is, got useful info from "Oracle GoldenGate high availability using Oracle Clusterware" white paper at http://www.oracle.com/technetwork/middleware/goldengate/overview/ha-goldengate-whitepaper-128197.pdf
    As per the white paper, if you do
    crsctl status resource -p | egrep -i 'network|subnet' | egrep -i 'name|subnet'
    output will look something like this:
    NAME=ora.net1.network
    USR_ORA_SUBNET=10.2.0.0
    net1 in NAME indicates this is network 1, and second line indicates the subnet on which the vip will be created.
    # ${GRID_HOME}/bin/crsctl setperm resource <vip_name> -u user:oracle:r-x
    I did the following as oracle:
    Oracle_Prompt> ${GRID_HOME}/bin/crsctl start resource <vip_name>
    If you want to relocate this vip to other node in the cluster:
    Oracle_Prompt> ${GRID_HOME}/bin/crsctl relocate resource <vip_name> -s <source_node> -n <target_node>
    Hope this helps.
    Thanks,
    Moorthy.
    帖子经 Moorthy Rekapalli编辑过

  • News creation error in Km Repository

    hi,
    There is a Km repository in portal Km content.
    When I tried to create a news in its sub folders using the sap demo news template it gives an error 'creation error'.But I am able to create news with the same template in other folders in root.Please help me to solve this issue.
    Thanks in advance,
    jesmi.

    Hi Jesmi,
    Create your contents under /root/documents. Contents created using XML forms builder can be saved only under /root/documents and not /root itself.
    To access the repository, use Explorer menu under Content Management role. I believe that you are accessing it using KM Content menu under Content Admin role.
    Hope it helps,
    Shankar

  • [JCO.ServerThread-1] ERROR  SERVER-EXCEPTION - [null,null,null,] com.sap.mw

    When we execute a SAP transaction through xMII, xMII server is brought down.
    I looked in the cms.log file and found this:
    <b><i><i>2007-10-16 11:07:23,355 [JCO.ServerThread-1] ERROR  SERVER-EXCEPTION - [null,null,null,] com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Tue Oct 16 11:07:23 EDT 2007.
    This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 64 seconds.</i></i></b>
    When I try to log back onto xMII, I see the following: 
    <b><i>Error Executing Transaction Status (500) Internal Server Error.</i></b>
    I created a Business Logic Services transaction within XMII.  This BLS extracts data from AFPO Order Item table.  A Repeater loops through the RESPONSE output table, and executes a SAP Query to load the data into Oracle tables.
    I also have a BLS that executes BAPI_PRODORD_GET_LIST. 
    When I execute either one of these transactions, the system will fail with the above error when the amount of data being extracted reaches a specific number.
    I have simplified the BLS to run a JCO block for BAPI_PRODORD_GET_LIST and a tracer block.  When I execute the BLS that executes BAPI_PRODORD_GET_LIST to retrieve 2,000 production orders, the transaction hangs.  After 30 minutes, I terminate the transaction so it won’t take the xMII server down again.  However, had I had a repeater to loop through the output and load into the oracle tables, the server goes down.
    That’s my problem.  My other question to the problem is this. 
    What are the limitations to the amount of data that can be extracted from SAP via xMII?  Excel spreadsheets can download 40,000 records.  You can write a SELECT * in any language and pull down 40,000 records.  What is going on?

    David,
    Just an FYI the error message that you have found is not connected to your BLS transaction but rather the default IDoc listener trying to connect to something that doesn't exist.  This listener will automatically start each time xMII starts, as a result you can set it up to connect to an RFC destination or delete the default configuration and it will go away. 
    Now onto your issue; How many Production Orders are being returned from the BAPI?  How are you loading each of them into Oracle?  How much memory is allocated to ServletExec vs. How much is available on the machine?  By default xMII will limit all SQL/Tag queries to their <b>RowCount</b> with a max at 250k rows but this does not apply to the JCo call.
    My suggestion here is to look for the other error message that pertains to your transaction which may reside in the ServletExec logs and not xMII, they can be found on your xMII machine here: http://localhost/servletexec/admin/login.jsp
    Hope this helps.
    Sam

  • Creation error of EJB

    Hi!
    I ran into the following problem when referencing the public parts of
    an external j2ee library project stored in the NWDI. Specifically I would
    like to reference an API part for having a correct build path during development.
    Unfortunately I can create this reference but afterwards the NWDS tells
    me that it requires to rebuild the ejb-jar.xml and the ejb-j2ee-engine.xml.
    This automated refactoring leaves me with two 'empty' files, having all
    my ejb definitions removed.
    I tried to define new stateless ejbs by creating them via the context menu
    and ran into the error 'Not able to create Session Bean'. In order to find out
    what happened, I checked the .log file of the NWDS in my workspace folder
    and found the following lines:
    com.tssap.j2ee.ui.ejb.external.EjbCreationException: Creation error of EJB
         at com.tssap.j2ee.ui.ejb.external.EjbFactory.createSessionBean(EjbFactory.java:304)
         at com.tssap.j2ee.ui.ejb.external.EjbFactory.createSessionBean(EjbFactory.java:91)
         at com.tssap.j2ee.ui.perspective.core.action.CreateEjbInPackageActionProvider$CreateStatelessSessionBeanInPackageAction.run(CreateEjbInPackageActionProvider.java:468)
         at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:224)
         at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
         at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1407)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
         at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
         at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
         at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
         at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
         at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
         at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
         at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
         at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
         at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
         at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
         at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
         at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
         at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
         at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
    Nested exception -
    com.tssap.j2ee.model.J2eeCreateException: Creation error of EJB
         at com.tssap.j2ee.model.ejb.impl.EjbProject.createSessionBean(EjbProject.java:155)
         at com.tssap.j2ee.model.ejb.impl.EjbModule.createSessionBean(EjbModule.java:385)
         at com.tssap.j2ee.ui.ejb.wizard.internal.CreationFactorySemanticAPI.createEJB(CreationFactorySemanticAPI.java:115)
         at com.tssap.j2ee.ui.ejb.wizard.internal.CreationFactorySemanticAPI.createSessionBean(CreationFactorySemanticAPI.java:55)
         at com.tssap.j2ee.ui.ejb.external.EjbFactory.createSessionBean(EjbFactory.java:301)
         at com.tssap.j2ee.ui.ejb.external.EjbFactory.createSessionBean(EjbFactory.java:91)
         at com.tssap.j2ee.ui.perspective.core.action.CreateEjbInPackageActionProvider$CreateStatelessSessionBeanInPackageAction.run(CreateEjbInPackageActionProvider.java:468)
         at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:224)
         at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
         at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1407)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
         at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
         at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
         at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
         at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
         at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
         at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
         at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
         at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
         at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
         at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
         at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
         at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
         at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
         at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
    Does anyone has been confronted with such an error before and could give
    me a hint about how to solve this problem.
    Kind regards,
      Christian Kreutzfeldt

    I resolved the problem myself by creating a new library project where I added
    the libraries stepwise until building the referencing project failed. The library
    project contains the hibernate framework which includes a file named jboss-j2ee.jar.
    In some way or another this conflicts with the NWDS which leads to failures
    when updating the ejb-jar.xml and ejb-j2ee-engine.xml files.

  • Thread creation error: Not enough storage is available to process this command

    Two user in my company have this problem, I have already used the solution on the community but would come back after 2 to 3 weeks. They all have the message "Thread creation error: Not enough storage is available to process this command". I tried increase the virtual memory to 4Gb, update one client to the latest, reset IRPStackSize, delete temp folder.  one client is 7.5.XX with windows 7 and another is 6.20.0.104 with Windows XP,My machine is also 6.20 with windows 7 but I dont have this problem.   

    Version previous to 7.6 worked fine. After update I have got this message and mostly of Skype GUI turns black or vanishes. No possibility of making more than one call before crash, It is amazing that a thread started about two weeks ago has no technical answer, at least. What do I do with my credits and my appointments? Throw them away?

Maybe you are looking for

  • I am having issues with my mac book pro backing up

    It is taking days. I have 5200 photos on it and a few problems so the mac guys said to back it up so they can do a few things to it but nothing major. Why is it taking SO long to back up? It's at 7.45 GB and will be complete at 41 GB.

  • How do I create cue point in FLV component

    Ok team, I have a video clip that needs to have sound with it, I also want to put motion graphics at certain points in the clip using Flash. Ok so if I embed the clip into the timeline so that I can use another layer on top to do the graphics I get p

  • Is there a cap lock function on the iPod touch?

    Is there a cap lock function on the i-pod touch? I don't see a way to do it.

  • Migrating from 9i to 10g through exp/imp

    Hi, We need to migrate a database on 9i in HP-UNIX to 10g in IBM AIX. Can you please tell me whether i can export data in 9i with 9i export utility and import it into 10g using 10g data pump utility for faster import ? We don't have the 10g software

  • Difference between ';' and '/' in the SQL scripts

    Hi All, Could anyone please let me know the difference between placing ';' and '/' in the sql scripts. I am placing couple of insert statements in a textfile with .sql extension and running it from the sql prompt. Which one( ';' or '/') should be kee