JCO - RFC_ERROR_SYSTEM_FAILURE when executing BAPI_WHSE_STOCK_GET_LIST

hello,
I'm trying for hours now to execute the BAPI "BAPI_WHSE_STOCK_GET_LIST" from a java program. I can obtain its import, export and table parameterlist w/o any problems, but as soon as I invoke execute() on the function I'm getting the following error:
[JAV-LAYER] JCO.Client.execute (BAPI_WHSE_STOCK_GET_LIST) threw a NON-ABAP exception: com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: The function module "BAPI_WHSE_STOCK_GET_LIST" cannot be used for 'remote' calls.
I can see in SAP GUI that the function is of course remote enabled, the user id has all imaginable privileges. more strangly, i can execute the directly associated function BAPI_WHSE_STOCK_GET_DETAIL without any problems. In fact, of all RFCs / BAPIs I used so far this is the only one which comes up with this problem. Alas, I'm desparately relying on it. Setting the tracelevel to 10 does not produce any useful hints, nor does the content of def_rfc.trc reveal any more information than the error message.
JCO Middleware version: 2.1.8 (2006-12-11)
Any help is appreciated, maybe at least somebody has the same problem in his environment!
TIA
Till

Similar Messages

JCO - RFC_ERROR_SYSTEM_FAILURE: com/sap/mw/jco/JCO$Server

Hi,
I call from Java an ABAP RFC and this RFC in turn call back the Java stack and it fails.
At Java side I get:
#1#com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: com/sap/mw/jco/JCO$Server
     at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:516)
     at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1515)
     at com.sap.mw.jco.JCO$Client.execute(JCO.java:3996)
     at com.sap.mw.jco.JCO$Client.execute(JCO.java:3544)
     at com.sap.sup.admin.setup.SolManRfcAdapter.getJabapLandscape(SolManRfcAdapter.java:787)
     at com.sap.sup.admin.setup.SetupUpgrader.execute(SetupUpgrader.java:52)
At ABAP side I get:
Category               ABAP Programming Error
Runtime Errors      CALL_FUNCTION_REMOTE_ERROR
ABAP Program      CL_DIAGLS_SMSY_FACTORY========CP
Application Component SV-SMG-DIA
Date and Time        21.09.2009 17:50:59
Short text
     "com/sap/mw/jco/JCO$Server"
Is it allowed to call JAVA -> ABAP -> JAVA from JCO point of view?
Thanks in advance!
Regards,
Serge.

Hi Serge,
Two doubts:
- Does your RFC work when you call it directly from the SE37 puting the same input parameters used by Java application?
- Was the RFC changed after the coding of Java application? If so, the interface between Java and RFC must be regenerated.
Regards,
Rodrigo.

Strange JCO error when running Web Dynpro App

I am developing a new WebDynpro application to be deployed on our SAP
Portal interfacing with a SAP R/3 backend. The application uses
multiple JCo destinations (two for each model) all of which were
configured according the SAP guides (userid/password for metadata and
ticket for model data). The tests work fine for all connections.
However, we get HTTP 500 errors when executing the application. The
main message is : "com.sap.mw.jco.JCO$Exception: (101)
RFC_ERROR_PROGRAM: 'password' missing".
I have not been able to find anything to help and SAP themselves have yet to provide us an explanation.
- I was able to run the application fine in dev and it worked with this error occasionally appeared but now it always appears.
- Our portal is 2004s SP 10
- All of the JCOs are configured properly as per SAP instructions
 - modeldata use SSO with user configured in R/3
 - metadata use userid/password
- Another prototype Web Dynpro application has the same error.
- All of the Web Dynpro models are Adaptave RFC.
Any ideas would be greatly appreciated.

Here is the full exception I am getting.
com.sap.tc.webdynpro.services.exceptions.TypeNotFoundException: type com.pwc.servicecenter.sapwai.wdmodel.types.Klassenart could not be loaded: com.sap.dictionary.runtime.DdException: failed to create provider: 'password' missing
 at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:250)
 at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getDataType(DataTypeBroker.java:213)
 at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:318)
 at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initUnmappedAttributes(NodeInfo.java:687)
 at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:238)
 at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:671)
 at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
 at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
 at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
 at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:429)
 at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.createComponent(ClientComponent.java:932)
 at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.createComponent(ClientComponent.java:176)
 at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponentInternal(ComponentUsage.java:149)
 at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponent(ComponentUsage.java:116)
 at com.pwc.servicecenter.sapwai.wdcomponents.Z_CLASS_COPY_MAIN.wdDoInit(Z_CLASS_COPY_MAIN.java:97)
 at com.pwc.servicecenter.sapwai.wdcomponents.wdp.InternalZ_CLASS_COPY_MAIN.wdDoInit(InternalZ_CLASS_COPY_MAIN.java:110)
 at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
 at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
 at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
 at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:429)
 at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
 at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:700)
 at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:269)
 at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:772)
 at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:707)
 at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
 at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:154)
 at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
 at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
 at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
 at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1248)
 at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:353)
 at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:551)
 at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:190)
 at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
 at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
 at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
 at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
 at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:429)
 at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
 at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:700)
 at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:269)
 at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:752)
 at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:705)
 at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
 at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:154)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.dictionary.runtime.DdException: failed to create provider: 'password' missing
 at com.sap.dictionary.runtime.ProviderFactory.internalGetProvider(ProviderFactory.java:254)
 at com.sap.dictionary.runtime.ProviderFactory.getProvider(ProviderFactory.java:146)
 at com.sap.dictionary.runtime.DdDictionaryPool.getProvider(DdDictionaryPool.java:97)
 at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:79)
 at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:48)
 at com.sap.dictionary.runtime.DdBroker.getDataType(DdBroker.java:149)
 at com.sap.dictionary.runtime.DdBroker.getSimpleType(DdBroker.java:170)
 at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:242)
 ... 63 more
Caused by: java.lang.reflect.InvocationTargetException
 at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
 at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
 at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
 at com.sap.dictionary.runtime.ProviderFactory.internalGetProvider(ProviderFactory.java:229)
 ... 70 more
Caused by: com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'password' missing
 at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:457)
 at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1015)
 at com.sap.mw.jco.JCO$Client.connect(JCO.java:3238)
 at com.sap.dictionary.runtime.mdi.DataProvider.<init>(DataProvider.java:91)
 at com.sap.dictionary.runtime.mdi.DataProvider.<init>(DataProvider.java:123)
 ... 75 more

SQL error 3113 occurred when executing EXEC SQL.

Hi,
We are facing one typical problem, One background is failing regularly with
below dump. as we now got all notes giving information, if database restarted
taking backup, these type of failures occur, but our database is only down for backup once in a week, but it is failing with frequenly.
in this two servers are located in different place, in this job tries to connect
another server to get material statistics.
It is giving some error message in sm21 with
SQL error 3113 occurred when executing EXEC SQL.
work procees in reconnect mode.
all notes saying these types of dump occur when database restared, but this dump
even though database is up.
below is short dump, please can anyone help me from this problem.
ABAP runtime errors    DBIF_DSQL2_SQL_ERROR
      Occurred on    08.01.2007 at 00:30:28
>> Short dump has not been completely stored. It is too big.
SQL error 3113 occurred when executing EXEC SQL.
What happened?
The error occurred in the current database connection "AZ1".
What can you do?
Note the actions and input that caused the error.
Inform your SAP system administrator.
You can print out this message by choosing "Print". Transaction ST22
allows you to display and manage termination messages, including keeping
them beyond their normal deletion date.
Error analysis
How to correct the error
Database error text........: "ORA-03113: end-of-file on communication channel#"
Triggering SQL statement...: "select mara.groes, mara.brgew, mara.ntgew,
mara.gewei, mara.volum, mara.voleh, mara.mstae, mara.mstde, mara.prdha,
marc.matnr, marc.werks, marc.mmsta, marc.mmstd from sapr3.mara, sapr3.m
where sapr3.mara.mandt = sapr3.marc.mandt and sapr3.mara.matnr =
Internal call code.........: "[DBDS/NEW DSQL]"
Please check the entries in the system log (Transaction SM21).
If the error occurred in a non-modified SAP program, you may be
able to find a solution in the SAP note system.
If you have access to the note system yourself, use the following
search criteria:
"DBIF_DSQL2_SQL_ERROR"
"ZM2431216 " or "ZM2431216 "
"EXTRACT_GENERAL_DATA"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in th
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error o
or which actions and input led to the error.
System environment
SAP Release.............. "46C"
Application server....... "essceu3"
Network address.......... "172.19.119.198"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "00C7ADBD4C00"
Database server.......... "ukblx176"
Database type............ "ORACLE"
Database name............ "EU3"
Database owner........... "SAPR3"
Character set............ "es_ES.ISO8859-1"
SAP kernel............... "46D"
Created on............... "Jul 9 2006 20:26:33"
Created in............... "AIX 1 5 00447C4A4C00"
Database version......... "OCI_920__OCI_7_API "
Patch level.............. "2257"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.0.5.., ORACLE 8.0.6.., ORACLE
8.1.6.., ORACLE 8.1.7.., ORACLE 9.2.0.., ORACLE 10.2.0.."
SAP database version..... "46D"
Operating system......... "AIX 1 4, AIX 2 4, AIX 3 4, AIX 1 5, AIX 2 5, AIX 3
5, , System build information:,                                      , LCHN :
841480"
User, transaction...
Client.............. 600
User................ "MPZMMES"
Language key........ "S"
Transaction......... " "
Program............. "ZM2431216 "
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where termination occurred
The termination occurred in the ABAP/4 program "ZM2431216 " in
"EXTRACT_GENERAL_DATA".
The main program was "ZM2431216 ".
The termination occurred in line 980
of the source code of program "ZM2431216 " (when callin
The program "ZM2431216 " was started as a background jo
Source code extract
009500              mara.ntgew,
009510              mara.gewei,
009520              mara.volum,
009530              mara.voleh,
009540              mara.mstae,
009550              mara.mstde,
009560              mara.prdha,
009570              marc.matnr,
009580              marc.werks,
009590              marc.mmsta,
009600              marc.mmstd
009610        into :w_ops-groes,
009620              :w_ops-brgew,
009630              :w_ops-ntgew,
009640              :w_ops-gewei,
009650              :w_ops-volum,
009660              :w_ops-voleh,
009670              :w_ops-mstae,
009680              :w_ops-mstde,
009690              :w_ops-prdha,
009700              :w_ops-matnr,
009710              :w_ops-werks,
009720              :w_ops-mmsta,
009730              :w_ops-mmstd
009740        from sapr3.mara, sapr3.marc
009750        where sapr3.mara.mandt = sapr3.marc.mandt
009760          and sapr3.mara.matnr = sapr3.marc.matnr
009770          and sapr3.mara.mandt = :p_mandt
009780          and sapr3.mara.matnr = :w_ebs-matnr
009790          and sapr3.marc.werks = :p_owerks
    >    ENDEXEC.
009810 endform.                    " extract_general_data
009820 *&
009830 *&      Form append_i_ops
009840 *&
009850 *      Appends W_OPS to I_OPS
009860 *
009870 form append_i_ops.
009880    append w_ops to i_ops.
009890 endform.                    " append_i_ops
009900 *&
009910 *&      Form extract_material_description
009920 *&
009930 *      Extracts a Material Description from the remote database an
009940 *      modifies the current record in I_OPS.
009950 *
009960 *        >P_SPRAS Language Key
009970 *
009980 form extract_material_description using    p_spras.
009990    EXEC sql performing set_langauge.
Contents of system fields
SY field contents..................... SY field contents............
SY-SUBRC 0                            SY-INDEX 0
SY-TABIX 1                            SY-DBCNT 1
SY-FDPOS 18                            SY-LSIND 0
SY-PAGNO 0                            SY-LINNO 1
SY-COLNO 1
Chosen variables
Name.......................... Contents.1........2........3....+..
W_EBS-PRAT4
                              2
                              0
W_OPS-GROES
                              22222222222222222222222222222222
                              00000000000000000000000000000000
W_OPS-BRGEW                    #######
                              0000000
                              000000C
W_OPS-NTGEW                    #######
                              0000000
                              000000C
regards,
krishnaiah.

Hi,
This is usually a SERVER SIDE DATABASE PROBLEM or SQLNET LISTENER (server side) PROBLEM. The client side should initially be ignored and instead the server should be investigated. In rare cases, this can be caused by client
side memory or other resource problem, or a DLL version mismatch, but this is
unlikely.
Enlist the assistance of your DBA. Then reproduce the ORA-3113 error on your
client application. Ask your DBA to look at the database side Alert.log and
trace files and look for ANY activity. Any activity that coincides with your
ORA-3113 will be a clue.
REgards
Vinod

Performance Problem when executing the report for the first time.

Hi,
We have a Zreport...to improve the performance i created Index on few Data Base table..before my changes it used to take more than 15 minutes after the changes it taking less than 1 min for the same variant and for other variants also.
But when executing the first in morning its taking the same time more than 15 min.Please let me know how to increase the performance when executing first time also,
Thanks,
Kiran.

Hi all,
Appreciate your valuable replies...
@ Thomas: i do accept with your solution running a background job..but user is not accepting for it..thanks for your reply.
@Siegfried Boes : for testing purpose Im running this manytimes..but for user they may
require when ever they need to know open oders.the volume of the data is barongs 300-350 at
max.
@Brad Bohn : After creating the index the repose time reduced to half ...i hope i have
created a right index.
Observation here...I executed the report in production system more than 5 times it took the
same time, my changes are still in quality..so i think may be for selecting the right index
its taking this much time.and for the next time is taking right index n doing it so it taking
less.
Do you accept it?.if so Please let me know how to explicitly say the select statement to
use my index.
Thanks,
kiran.

Vi works in LabVIEW, but not when executed by TestStand.

Hi everybody. I'm using LabVIEW 8 with the Sound and Vibration
Toolkit, and TestStand2. I am planning on using TestStand to
execute a series of performance tests on an audio processing
board. When run independently, the vi (which I have attached
here) runs correctly, and returns a value for the parameter being
tested. In this case it is SNR.
However, when executed by TestStand, the vi seems to run correctly, but
returns a value of "NaN". This causes TestStand to fail the test.
Does anybody know what is going on here? I've checked FAQs and
help files, etc... Why would the vi work on its own but not in
TestStand?
Thanks.
Brett Gildersleeve
Attachments:
SingleChannelSNR.vi ‏173 KB
Test Sequence.seq ‏15 KB

Hi Ray, Thanks for the reply.
Basically, when I run the VI on its own, I see the SNR value appearing
both in the SNR indicator and in the Test Data Out cluster under
Numeric Measurement. The rest of the indicators are empty
(string, report text, status, code, source). My waveform graph
shows an FFT of the signal.
However, when running the exact same VI through TestStand, I get NaN as
the output. The FFT of the signal is NOT displayed in the
waveform graph... strange. No errors are received.
In order to make it easier to debug, I replaced all of the analysis functions
with functions included in LabVIEW 8. Now everybody should be
able to run it. I do a simple THD test this time around. With the VI running
on its own, I get a value of 1.8 as the THD and the Numeric Measurement of Test Data
Out. However, whenever running the test with TestStand, I get a
value of NaN.
Same problem.
Any suggestions?
By the way, what exactly do you mean by "wiring
up the Error cluster and feed in to the Error Out."? I'd
like to try it out, but I'm not sure exactly what you mean. I
already have the Error out cluster wired up, I think.
Message Edited by TheSleeve on 05-22-2006 12:12 PM
Attachments:
SingleChannelTHD.vi ‏159 KB
Test Sequence2.seq ‏15 KB

Have updated from Snow Leopard to Lion with Safari Version 5.0.5. Now I can not update to Safari 5.1. There is no update in the Software Updater, and on the apple-download page, I only found a Safari 5.1 for Snow Leopard. When executing it, there is an e

I have updated from Snow Leopard to Lion with Safari Version 5.0.5. Now I can not update to Safari 5.1. There is no update in the Software Updater, and on the apple-download page, I only found a Safari 5.1 for Snow Leopard. When executing it, there is an error message, that it is for 10.6 only.
It seems that I should have first updated Safari, and then only to Lion, which I didn't. Any idea how I can fix this now without having to rollback to Snow Leopard, update Safari and then go back to Lion?

Try this Safari5.1 from the installer package
http://www.filefactory.com/file/cc9005d/n/Safari.pkg.zip
The download worked better with Firefox not sure why. At the bottom of the page after the captcha>> slow down load is the Free link, it took about 4 minutes to download on my test.

Error when executing job from BW

Hi,
We have created a job that transfers a set of data to BW PSA.
When executing from data services designer or from the management console the job works fine.
When executing the job from BW administration workbench, the job is executed and does not report failures (we can consult the log in the management console).
But nothing arrives in the PSA, and on the workbench we get the following errors:
Error in a data conversion in record
data record 1 of the fragmented entry is too long.
Error in a data conversion in record
Please advice what to check next.
Best regards
Thomas

Hi,
Thank you for your help.
I tried changing the BW datastore to UTF-8 but am still not able to load these data when it is trigged from BW.
After changing the datastore to UTF-8 I get some additional information in the log but no errors
Additional information in the log:
The specified locale and datastore codepage
Br
Søren Ejlersen

Getting error "Column is not indexed " when executing query on ORACLE 10g

Hi all,
When executing the below query im getting the error "ORA-20000:Column is not indexed"
query:
select xmlelement("nexml:result",xmlattributes('http://namespaces.nextance.com/nex/xml' as "xmlns:nexml"),xmlelement("nexml:value",count(*))).getClobVal()
from "permission"
where ( ((contains(object_value,'(searchDocument) inpath(/permission/action)') > 0)) and ((existsNode(object_value,'/permission[resource/resourcekey/@type[. = "document"]]') = 1)) and ((contains(object_value,'(GeneralUser) inpath(/permission/principal/@name)') > 0)) and ((existsNode(object_value,'/permission[principal/@type[. = "group"]]') = 1)) and ((existsNode(object_value,'/permission[type[. = "allow"]]') = 1)) and ((contains(object_value,'(nexip) inpath(/permission/resource/resourcekey/field/@value)') > 0) or (contains(object_value,'(Corporate) inpath(/permission/resource/resourcekey/field/@value)') > 0) or (contains(object_value,'(ProcurementAgreement) inpath(/permission/resource/resourcekey/field/@value)') > 0) or (contains(object_value,'(Procurement) inpath(/permission/resource/resourcekey/field/@value)') > 0) or (contains(object_value,'(SalesAgreement) inpath(/permission/resource/resourcekey/field/@value)') > 0)) )
Then after checking some forum, i replaced "contains" with "ora:contains" and executed the query. Now im not getting the first error but got a new error "invalid relational operator"
So please help me in resolving the errors?
Thanks in advance.

Anil kumar wrote:
Hi,
Thanks for your reply. Could you please explain your solution in detail?Hi,
I just have a try...
create table t (id int,my_lob clob)
begin
insert into t values(101,'Oracle redwood shores USA');
insert into t values (102,'HP palo alto USA');
insert into t values(103,'Capgemini FRANCE');;
end;
create index my_idx on t(my_lob) indextype is ctxsys.context
select *
from t
where contains(my_lob,'USA',1)>0
Output
ID      MY_LOB
101     Oracle redwood shores USA
102     HP palo alto USA Hope it helps,
CKLP

Error when executing a Query through information Broadcasting

Dear SDN,
We have configured information Broadcasting in the Web Reports---
Scheduled and then when executing the following error is coming
500 internal server error - Microsoft internet explorer
Error when processing your request
What has happened?
The URL http://xyz.com:8000/sap/bw/BEx was not called due to an error.
Note
The following error text was processed in the system BWD : Please enter a valid value for characteristic 0CALMONTH.
The error occurred on the application server asalbwd_BWD_00 and in the work process 0 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
START-OF-SELECTION of program RSRD_BROADCAST_PROCESSOR
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system BWD in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server asalbwd_BWD_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server asalbwd_BWD_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http-c:900-u:VENKAT -l:E-s:BWD-i:asalbwd_BWD_00 -w:0-d:20080708-t:133744-v: ERROR_MESSAGE_STATE-e:Please enter a valid value for characteristic 0CALMONTH.
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Please suggest us to resolve this error..
Help will be greatly appreciated with points..
Thanks in advance

Hi
Thanks...
I have given only Fiscal Year/Period Variable
Other than Fiscal Year/Period Variable....No Variables in that Query..
In FI Queries, I did not use 0CALMONTH Variable...
I do not know why it is giving that error..
Please suggest us to resolve this error..
Thanks in advance

Error when executing query without passing variable selection

Hi Gurus
I am getting an error while executing a query with out passing values for variables
When executing the query by passing the filter values report returns the data
When executing the query with out passing variable selections the error message is
Unknown error in SQL interface
Error reading the data of Info Provider ZCRM_O08
Error while reading data; navigation possible
System error in program SSAPLRS_EXCEPTION and form
RS_EXCEPTION_TO_MESSAGE
No Data Available
can any one please help me in resolving this
Thank you

Hi Srini
Thanks for your quick response
When i am executing the query with selection it is returning the data
giving error when executing with out passing the selection
is there any other cause for this problem
like any particular info object causes this sort of problem
Thank you

Webi report throwing error when executed

HI Experts,
While executing a Webi Report we are gettign following error when executing with more than one characteristics -
A Database error occured. The database eror text is : The MDX Query select { [Measures].[4225B1TBMEMOYKZGDKLVINMAW] } ON COLUMNS FROM [ZMEPSC01/ZMEPSC01_QRY_0001]
failed to execute with the error Unknown error.(WIS 10901).
We tried changing the Universe -> Parameter -> Control -> Limit size of result set to -> unchecked it.
But still the error remains. Can u put some light over it.
Thanks.

Hello ,
Just Check with the BI the people they might change the the column name or some thing else in the bex Query that s way It is showing error.
Refresh the universe and generate the report then check it.
Thanks
Santhosh V

Error when executing add-on in client's computer

Dear All experts/gurus,
I need your help. I have problem when executing/open an add-on (installed in server and can be executed using server computer without creating ard file) I've created in my client's computers. although it is automatically installed but when execute, the error comes which message is "wrong digital signature". I create ard file for every clients that want to execute/use add-on and succeed. It is okay that I can create ard file for 1-3 computers but if it 10-20 computers, it is wasting time. how to solve this problem, where all computers in clients site can execute the add-on without must create ard file in every computers ?
I appreciate your answer. tks in advance.

Take a look at the "Package and Deployment" section in the SDK help file. This will guide you through how to install / launch your add-ons.
If you are using the standard SAP method documented there, you only need 1 ard file per release version of your add-on. You do not need to have a separate ard file on every client pc. The ard file includes in it a checksum (MD5) of your add-on executable. The ard file itself is only used during the "registration" process for an add-on. During registration, the checksum containined in the ard file and your add-on installer itself are both written to the Common database.
The error message "wrong digital signature" when the SAP add-on manager attempts to execute an add-on indicates that the executable version installed on that client does not match the one that was registered earlier. Most common causes are:-
a) You have manually copied a different executable onto the client pc
b) When creating the ard file, you selected a different add-on executable from the one you included in your installer.
When creating the ard file using the AddonRegDataGen program, make sure that you point the "Add-on EXE full path" to the version of the add-on executable that you are including in your installer. You will have to create a new ard file if you change the executable in the future, for example if you release a new version of your add-on.
John.

Error when executing a .irpt page

Hi,
I am getting the below error when executing a .irpt from the workbench. I am on MII 12.2.2 Build (235).
404 Not Found
SAP NetWeaver Application Server 7.20 / AS Java 7.30
Error: S:usrsapALXJ10j2eeclusterappssap.comxappsxmiiearservlet_jspXMII
oot/XMII/CM/<Project>/<File.irpt>
Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jstsg/home
Details: No details available.
Please share your thoughts on this.
Regards,
Chanti.

Hi Chanti,
This sounds obvious, but check to make sure your irpt page has the extension .irpt in the workbench. Depending on how you saved it, it might have been dropped.
Also make sure the page is published by either saving it to web:// (not db://) or by right clicking and selecting Publish.
Regards,
Mike

Error when executing statement for table/stored proc

Hi All,
 I am getting this error when executing IDOC to JDBC (Stored Procedure) Scenario.
 In my stored procedure I have three insert statements to insert rows in to 3 tables.
 This stored procedure is working fine for two insert statements i.e,
 For this I have created data type for stored procedure with 10 elements and executed the scenario and was successfully running.
 when I added 3rd insert statement to stored procedure ie., when i added 5 more elements to the datatype (totally 15 elements) it starts giving the bellow error in Message Monitoring.
Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
 Note:- I have run the stored procedure with three insert statements in Sql Server, and also by calling an external program also, and was working fine.
 Note : Is there any structure needs to be follow when working with IDOC to Stored procedure.
I am struck up with the error, can any body resolve this issue.
Thanks in Advance,
Murthy

Hi narasimha,
 This seems to be any error due to incorrect query formation.In your receiver jdbc channel set the parameter logSQLstatement = true.you can find this parameter in the advanced mode. Using this parameter you will be able to see the sql query which is generated at runtime in the audit log in RWB.
Regards,
Pragati

JCO - RFC_ERROR_SYSTEM_FAILURE when executing BAPI_WHSE_STOCK_GET_LIST

Similar Messages

Maybe you are looking for