JCOP tools on 64-bit platform

Hello.
Is there any way to find jct.dll, jcpcsc.dll (those are in the jcop plug-in os/ directory) analogues for 64-bit platform?
As i know, jcop tools provides only dll's and so libraries for 32-bit platforms to communicate with the card? Are there any 64-bit compatible?
I want to use Offcard API from JCOP tools on 64-bit platform (it uses mentioned above dlls or shared objects on Linux).
Best regards,
eveline-z

eveline-z wrote:
Thanks for your reply.
So, Eclipse IDE with JCOP plug-in work fine on 64-bit platform without any emulation?Yes
I mean, you had no problems with connecting to a real card through the JCShell or even using JCOP Offcard API (because those are using native dll's for 32-bit platform which reside in com.ibm.bluez.jcop.eclipse_3.1.2\os\win32\x86\ directory)?I tested only on the simulator
The "com.ibm.bluez.jcop.eclipse_3.1.2\os\win32\x86\" directory is in the folder plugins in your eclipse path.
example : c:\eclipse\plugins\com.ibm.bluez.jcop.eclipse_3.1.2\os\win32\x86\
>
>
Thanks.
Best regards,
eveline-zMaDmEd

Similar Messages

Simulation using Eclipse plugin for JCOP tools

Dear All,
In search for a simulation environment for java card applet development I tried to use Eclipse plugin for JCOP tools.
The samples which comes with the JCOP tools works fine but when try to debug my applet I receive the error: Wrong Data 6A 80.
Generic JCOP v2.4.1 is selected for Java Card Simulation.
Following is the JCOP Shell screen:
cm- /term "Remote|localhost:8050"
--Opening terminal
/card -a a000000003000000 -c com.ibm.jc.CardManagerresetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B F8 13 00 00 81 31 FE 45 4A 43 4F 50 76 32 34 ;.....1.EJCOPv24
31 B7 1.
IOCTL().
ATR: T=1, FI=1/DI=3 (93clk/etu), N=0, IFSC=254, BWI=4/CWI=5, Hist="JCOPv241"
=> 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
(908058 nsec)
<= 6F 65 84 08 A0 00 00 00 03 00 00 00 A5 59 9F 65 oe...........Y.e
01 FF 9F 6E 06 47 91 92 18 00 00 73 4A 06 07 2A ...n.G.....sJ..*
86 48 86 FC 6B 01 60 0C 06 0A 2A 86 48 86 FC 6B .H..k.`...*.H..k
02 02 01 01 63 09 06 07 2A 86 48 86 FC 6B 03 64 ....c...*.H..k.d
0B 06 09 2A 86 48 86 FC 6B 04 02 15 65 0B 06 09 ...*.H..k...e...
2B 85 10 86 48 64 02 01 03 66 0C 06 0A 2B 06 01 +...Hd...f...+..
04 01 2A 02 6E 01 02 90 00 ..*.n....
Status: No Error
cm> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
cm> init-update 255
=> 80 50 00 00 08 B1 04 15 2B 41 3F 62 AB 00 .P......+A?b..
(2668 usec)
<= 00 00 F9 02 71 E3 BB AD BD CD FF 02 00 00 3D 02 ....q.........=.
9C 31 C7 89 AD 44 8E 13 17 15 2E 5A 90 00 .1...D.....Z..
Status: No Error
cm> ext-auth plain
=> 84 82 00 00 10 CE 6C DC D2 8C BE 5E 33 EC 58 D0 ......l....^3.X.
57 3A 52 D2 24 W:R.$
(2288 usec)
<= 90 00 ..
Status: No Error
cm> delete -r a00000006203010c04
=> 80 E4 00 80 0B 4F 09 A0 00 00 00 62 03 01 0C 04 .....O.....b....
00 .
(1084 usec)
<= 6A 88 j.
Status: Reference data not found
jcshell: Error code: 6a88 (Reference data not found)
jcshell: Wrong response APDU: 6A88
Ignoring expected error
cm> upload -d -b 250 "D:\JCOP\eclipse\projects\DigitalTachograph\bin\digitaltachograph\javacard\digitaltachograph.cap"
=> 80 E6 02 00 16 09 A0 00 00 00 62 03 01 0C 04 08 ..........b.....
A0 00 00 00 03 00 00 00 00 00 00 00 ............
(2100 usec)
<= 00 90 00 ...
Status: No Error
=> 80 E8 00 00 FA C4 82 84 42 01 00 25 DE CA FF ED ........B..%....
02 02 04 00 01 09 A0 00 00 00 62 03 01 0C 04 11 ..........b.....
64 69 67 69 74 61 6C 74 61 63 68 6F 67 72 61 70 digitaltachograp
68 02 00 21 00 25 00 21 00 0E 00 29 03 3E 00 CD h..!.%.!...).>..
23 D2 01 BB 04 44 00 00 09 E3 4B E5 00 11 00 05 #....D....K.....
01 A2 04 01 00 04 00 29 04 00 01 07 A0 00 00 00 .......)........
62 00 01 02 01 07 A0 00 00 00 62 01 01 02 01 07 b.........b.....
A0 00 00 00 62 01 02 02 01 07 A0 00 00 00 62 02 ....b.........b.
01 03 00 0E 01 0A A0 00 00 00 62 03 01 0C 04 01 ..........b.....
01 DF 06 00 CD 00 00 00 80 00 00 FF 00 01 00 00 ................
00 01 81 03 13 00 12 07 03 00 00 02 01 03 06 0B ................
8C 81 00 00 00 80 00 0B 00 0B 01 01 00 00 0B F9 ................
00 80 00 11 00 0F 01 01 00 10 0E A9 0D D4 0D F7 ................
0E 07 0E 18 0E 26 0E 35 0E 44 0E 50 0E 72 0E 81 .....&.5.D.P.r..
0E 90 0E 9B 0E F5 11 05 11 1A 11 50 00 80 00 05 ...........P....
00 04 01 04 00 01 13 AF 13 B5 13 BA 14 0C 13 00 ................
(6775 usec)
<= 6A 80 j.
Status: Wrong data
jcshell: Error code: 6a80 (Wrong data)
jcshell: Wrong response APDU: 6A80
Unexpected error; aborting execution
I will be very happy if you can help me. I am desperately in need of a working debugging environment.
Thanks in advance!
Kind regards,
Mehmet

     * Processes incoming READ_BINARY APDUs. Returns data of the currently
     * selected file.
     * @param apdu   where the offset is carried in header bytes p1 and p2.
     * @param le expected length by terminal
     * @return length of the response APDU
    private short processReadBinary(APDU apdu, boolean protectedApdu, short leUnprotected) {
        if (!hasFileSelected()) {
            ISOException.throwIt(SW_CONDITIONS_NOT_SATISFIED);
        byte[] buffer = apdu.getBuffer();
        // retrieve p1p2 from apdu buffer
        byte p1 = buffer[OFFSET_P1];
        byte p2 = buffer[OFFSET_P2];
        short offset = Util.makeShort(p1, p2);     // offset encoded in P1/P2, 15 lowest bit
        // offset encoded in P1/P2, 15 lowest bit
        // check if le != 0 <-- no response expected
        if (leUnprotected == 0) {
            ISOException.throwIt(ISO7816.SW_WRONG_LENGTH);
        if (selectedFile == null) {
            ISOException.throwIt(ISO7816.SW_FILE_NOT_FOUND);
        if ((selectedFile.getAccessConditions() & READ_REQUIRES_SM) == READ_REQUIRES_SM) {
            if(!protectedApdu)
               ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
        short fileSize = (short) selectedFile.getFileLength();
        // check offset
        if (offset >= fileSize) {
            ISOException.throwIt(ISO7816.SW_INCORRECT_P1P2);
        // check expected length
        if ((short) (offset + leUnprotected) > fileSize) {
            ISOException.throwIt(ISO7816.SW_WRONG_LENGTH);
            //ISOException.throwIt(SW_TAMAM);
        short bufferOffset = 0;
        crypto.setEncryptionStatus(isSelectedFileEncrypted());
        if (protectedApdu) {
            bufferOffset = crypto.getApduBufferOffsetDT(leUnprotected);
            if(isSelectedFileEncrypted())
               bufferOffset = crypto.getApduBufferOffset(leUnprotected);
            apdu.setOutgoing();
        Util.arrayCopyNonAtomic(selectedFile.getData(), offset, buffer, bufferOffset, leUnprotected);
        return leUnprotected;
     * Processes and UPDATE_BINARY apdu. Writes data in the currently selected
     * file.
     * @param apdu
     *            carries the offset where to write date in header bytes p1 and
     *            p2.
    private void processUpdateBinary(APDU apdu, boolean protectedApdu) {
        if (!hasFileSelected() || isLocked()) {
            ISOException.throwIt(ISO7816.SW_COMMAND_NOT_ALLOWED);
        if ((selectedFile.getAccessConditions() & DigitalTachograph.UPDATE_ALW) != DigitalTachograph.UPDATE_ALW) {
            if ((selectedFile.getAccessConditions() & DigitalTachograph.UPDATE_REQUIRES_SM) != DigitalTachograph.UPDATE_REQUIRES_SM) {
                ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
                return;
            }else if(!protectedApdu){
                    ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
        byte[] buffer = apdu.getBuffer();
        byte p1 = buffer[OFFSET_P1];
        byte p2 = buffer[OFFSET_P2];
        short offset = Util.makeShort(p1, p2);
        short readCount = (short) (buffer[ISO7816.OFFSET_LC] & 0xff);
        //if (!protectedApdu){
            readCount = apdu.setIncomingAndReceive();
        while (readCount > 0) {
            selectedFile.writeData(offset, buffer, OFFSET_CDATA, readCount);
            offset += readCount;
            readCount = apdu.receiveBytes(ISO7816.OFFSET_CDATA);
    private short processInternalAuthenticate(APDU apdu , boolean protectedApdu) throws CryptoException {
        byte[] buffer = apdu.getBuffer();
        short lc = (short) (buffer[OFFSET_LC] & 0xFF);
        if (lc != (short) (KID_LENGTH * 2)) {
            ISOException.throwIt(SW_WRONG_LENGTH);
        if (apdu.setIncomingAndReceive() != lc) {
            ISOException.throwIt(ISO7816.SW_WRONG_DATA);
        // Check if VU.CHR maches the one of the selected certificate on the card
        if (Util.arrayCompare(buffer, (short) (OFFSET_CDATA + KID_LENGTH), keyStore.selected_KID, (short) 0, KID_LENGTH) != 0) {
            ISOException.throwIt(SW_REFERENCE_DATA_NOT_FOUND);
        if (Util.arrayCopyNonAtomic(buffer, OFFSET_CDATA, Rnd1, (short) 0, (short) 8) != (short) 8) { // Receive Rnd1
            ISOException.throwIt(ISO7816.SW_WRONG_DATA);
        // Hash(PRnd2||K1||Rnd1||VU.CHR)
        random.generateData(PRnd2, (short) 0, (short) 90);
        random.generateData(K1, (short) 0, (short) 16);
        crypto.shaDigest.update(PRnd2, (short) 0, (short) 90); // PRnd2
        crypto.shaDigest.update(K1, (short) 0, (short) 16); // PRnd2||K1
        crypto.shaDigest.doFinal(buffer, OFFSET_CDATA, lc, digest, (short) 0); //Rnd1||VU.CHR
        BigNumber mod = new BigNumber((short) 128);
        mod.init(keyStore.Card_PubMod, (short) 0, (short) keyStore.Card_PubMod.length, BigNumber.FORMAT_HEX);
        mod.subtract(signed, (short) 0, (short) 128, BigNumber.FORMAT_HEX);
        if (mod.compareTo(signed, (short) 0, (short) 128, BigNumber.FORMAT_HEX) == -1) {
            mod.toBytes(signed, (short) 0, (short) 128, BigNumber.FORMAT_HEX);
        // To be added: if the selected private key is considered corrupted, the processing state returned is '6400' or '6581'.
        signed[0] = (byte) 0x6A;
        Util.arrayCopyNonAtomic(PRnd2, (short) 0, signed, (short) 1, (short) 90);
        Util.arrayCopyNonAtomic(K1, (short) 0, signed, (short) 91, (short) 16);
        Util.arrayCopyNonAtomic(digest, (short) 0, signed, (short) 107, (short) 20);
        signed[127] = (byte) 0xBC;
        if (!keyStore.cardPrivateKey.isInitialized()) {
            CryptoException.throwIt(CryptoException.ILLEGAL_VALUE);
        try {
            crypto.rsaSigner.init(keyStore.cardPrivateKey, Signature.MODE_SIGN);
            crypto.rsaSigner.doFinal(signed, (short) 0, (short) 128, signed, (short) 0);
        } catch (Exception e) {
            ISOException.throwIt(SW_REFERENCE_DATA_NOT_FOUND);
        if (!keyStore.selectedPublicKey.isInitialized()) {
            CryptoException.throwIt(CryptoException.ILLEGAL_VALUE);
        try {
            crypto.rsaCipher.init(keyStore.selectedPublicKey, Cipher.MODE_ENCRYPT);
            crypto.rsaCipher.doFinal(signed, (short) 0, (short) 128, signed, (short) 0);
        } catch (Exception e) {
            ISOException.throwIt(SW_REFERENCE_DATA_NOT_FOUND);
        apdu.setOutgoing();
        Util.arrayCopyNonAtomic(signed, (short) 0, buffer, (short) 0, (short) 128);
        return (short) signed.length;
    private void processExternalAuthenticate(APDU apdu) {
        short equipmentType = 0;
        if (keyStore.Selected_Cert != null) {
            equipmentType = (short) keyStore.Selected_Cert.CHA[6]; // check equipment type
        if (equipmentType != (short) 1 && equipmentType != (short) 2 && equipmentType != (short) 3 && equipmentType != (short) 4 && equipmentType != (short) 6) {
            ISOException.throwIt(ISO7816.SW_FUNC_NOT_SUPPORTED); // Instead of 6F00 throw a more meaningfull SW in case CHA is not valid.
        if (Util.arrayCompare(keyStore.Selected_Cert.CHA, (short) 0, TACHOGRAPH_AID, (short) 0, (short) 6) != 0) {
            ISOException.throwIt(ISO7816.SW_FUNC_NOT_SUPPORTED);
        byte[] buffer = apdu.getBuffer();
        byte p1 = (byte) (buffer[OFFSET_P1] & 0xff);
        byte p2 = (byte) (buffer[OFFSET_P2] & 0xff);
        if (p1 != 0 || p2 != 0) {
            ISOException.throwIt(SW_WRONG_P1P2);
        short lc = (short) (buffer[OFFSET_LC] & 0xFF);
        if (lc != (short) (128)) {
            ISOException.throwIt(SW_WRONG_LENGTH);
        if (apdu.setIncomingAndReceive() != lc) {
            ISOException.throwIt(ISO7816.SW_WRONG_DATA);
        Util.arrayCopyNonAtomic(buffer, OFFSET_CDATA, signed, (short) 0, (short) 128); // receive the cryptogram from the VU
        // decrypt the encrypted message with the card private key
        try {
            crypto.rsaCipher.init(keyStore.cardPrivateKey, Cipher.MODE_DECRYPT);
            crypto.rsaCipher.doFinal(signed, (short) 0, (short) 128, signed, (short) 0);
        } catch (Exception e) {
            ISOException.throwIt(SW_REFERENCE_DATA_NOT_FOUND);
        // verify the signature with the VU public key
        try {
            crypto.rsaCipher.init(keyStore.selectedPublicKey, Signature.MODE_VERIFY); // Cipher.MODE_ENCRYPT
            crypto.rsaCipher.doFinal(signed, (short) 0, (short) 128, signed, (short) 0);
        } catch (Exception e) {
            ISOException.throwIt(SW_REFERENCE_DATA_NOT_FOUND);
        if (signed[0] != (byte) 0x6A || signed[127] != (byte) 0xBC) {
            ISOException.throwIt(Util.makeShort(signed[0], signed[127]));
        try {
            verifyCardCertificates();
            Util.arrayCopyNonAtomic(signed, (short) 1, preDigest, (short) 0, (short) 106); // accumulate preDigest
            Util.arrayCopyNonAtomic(Rnd3, (short) 0, preDigest, (short) 106, (short) 8); // accumulate preDigest
            Util.arrayCopyNonAtomic(keyStore.Card_Cert.CHR, (short) 0, preDigest, (short) 114, (short) 8); // accumulate preDigest
            Util.arrayCopyNonAtomic(signed, (short) 91, K2, (short) 0, (short) 16); // receive K2 value
            crypto.shaDigest.update(signed, (short) 1, (short) 106); // PRnd4||K2
            crypto.shaDigest.update(Rnd3, (short) 0, (short) 8); // Rnd3
            crypto.shaDigest.doFinal(keyStore.Card_Cert.CHR, (short) 0, (short) 8, digest, (short) 0); //||Card.CHR
        } catch (Exception e) {
            ISOException.throwIt(SW_TAMAM);
        if (Util.arrayCompare(signed, (short) 107, digest, (short) 0, (short) 20) != 0) {
            ISOException.throwIt(SW_TAMAM);
        volatileState[0] |= MUTUAL_AUTHENTICATED;
        try {
            DTUtil.xor(K1, (short) 0, K2, (short) 0, KaKb, (short) 0, (short) 16);
            Util.arrayCopyNonAtomic(Rnd3, (short) 4, SSC, (short) 0, (short) 4); // tail of Rnd3
            Util.arrayCopyNonAtomic(Rnd1, (short) 4, SSC, (short) 4, (short) 4); // tail of Rnd1
        } catch (Exception e) {
            ISOException.throwIt(SW_TAMAM);
        try {
            keyStore.setKey_Ka(KaKb, (short) 0);
            keyStore.setKey_Kb(KaKb, (short) 8);
            keyStore.setSecureMessagingKeys(KaKb, (short) 0, KaKb, (short) 0);
        } catch (Exception e) {
            ISOException.throwIt(SW_TAMAM_DEGIL);
        return;
    private short returnPreDigest(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        apdu.setOutgoing();
        Util.arrayCopyNonAtomic(preDigest, (short) 0, buffer, (short) 0, (short) 122);
        return (short)preDigest.length;
    private short returnDigest(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        apdu.setOutgoing();
        Util.arrayCopyNonAtomic(digest, (short) 0, buffer, (short) 0, (short) 20);
        return (short)digest.length;
    private short returnOriginalText(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        apdu.setOutgoing();
        Util.arrayCopyNonAtomic(signed, (short) 0, buffer, (short) 0, (short) 128);
        return (short)signed.length;
    private void processVerify(APDU apdu) { // Verify_CHV(Pin_Ws)
        byte[] buffer = apdu.getBuffer();
        // retrieve the PIN data for validation.
        byte byteRead = (byte) (apdu.setIncomingAndReceive());
        // the PIN data is read into the APDU buffer
        // at the offset ISO7816.OFFSET_CDATA the PIN data length = byteRead
        if (pin.check(buffer, ISO7816.OFFSET_CDATA, byteRead) == false) {
            ISOException.throwIt(SW_VERIFICATION_FAILED);
        return;
    private void processPSO(APDU apdu) { // verify certificate
        byte[] buffer = apdu.getBuffer();
        byte p1 = (byte) (buffer[OFFSET_P1] & 0xff);
        byte p2 = (byte) (buffer[OFFSET_P2] & 0xff);
        short lc = (short) (buffer[ISO7816.OFFSET_LC] & 0xFF);
        if (p1 == (byte) 0x00 && p2 == P2_VERIFYCERT) {
            if (lc != TACHO_CERT_LENGTH) {
                ISOException.throwIt(SW_WRONG_LENGTH);
            if (apdu.setIncomingAndReceive() != lc) {
                ISOException.throwIt(ISO7816.SW_WRONG_LENGTH);
            try { // copy the certificate to be verified from APDU buffer to cert object
                Util.arrayCopyNonAtomic(buffer, OFFSET_CDATA, cert, (short) 0, lc);
            } catch (Exception e) {
                ISOException.throwIt(SW_TAMAM);
            if (Util.arrayCompare(keyStore.selected_KID, (short) 0, keyStore.ERCA_KID, (short) 0, KID_LENGTH) == 0) {
                keyStore.VUCA_Cert.verifyCert(cert, keyStore.selectedPublicKey, keyStore.selected_KID);
            } else if (Util.arrayCompare(keyStore.selected_KID, (short) 0, keyStore.VUCA_Cert.CHR, (short) 0, KID_LENGTH) == 0) {
                keyStore.VU_Cert.verifyCert(cert, keyStore.selectedPublicKey, keyStore.selected_KID);
            } else {
                ISOException.throwIt(SW_CERT_VERIFICATION_FAILED); // Selected keyId, with MSE, is neither ERCA_KID nor VUCA_KID
        } else {
            ISOException.throwIt(SW_CERT_VERIFICATION_FAILED);
        return;
    private short processGetChallenge(APDU apdu, boolean protectedApdu) {
        byte[] buffer = apdu.getBuffer();
        byte p1 = (byte) (buffer[OFFSET_P1] & 0xff);
        byte p2 = (byte) (buffer[OFFSET_P2] & 0xff);
        if (p1 != 0 || p2 != 0) {
            ISOException.throwIt(SW_WRONG_P1P2);
        random.generateData(Rnd3, (short) 0, (short) 8);
        short Le = apdu.setOutgoing();
        if (Le != (short) 8) {
            ISOException.throwIt(SW_WRONG_LENGTH);
        Util.arrayCopyNonAtomic(Rnd3, (short) 0, buffer, (short) 0, (short) 8);
        return Le;
    private void processMSE(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        if (buffer[OFFSET_P1] == (byte) 0xC1 && buffer[OFFSET_P2] == P2_DST) {
            short lc = (short) (buffer[OFFSET_LC] & 0xFF);
            if (lc != (short) (KID_LENGTH + 2)) {
                ISOException.throwIt(SW_WRONG_LENGTH);
            if (apdu.setIncomingAndReceive() != lc) {
                ISOException.throwIt(ISO7816.SW_WRONG_DATA);
            if (buffer[OFFSET_CDATA] != (byte) 0x83) {//check the tag of the data
                ISOException.throwIt(SW_SECURE_MESSAGING_DATA_OBJECTS_MISSING);
            } else if (buffer[OFFSET_CDATA + 1] != (byte) 0x08) {
                ISOException.throwIt(SW_INCORRECT_DATA_OBJECT); // check if the key is already selected one
            } else if (Util.arrayCompare(buffer, (short) (OFFSET_CDATA + 2), keyStore.selected_KID, (short) 0, KID_LENGTH) != 0) {
                if (Util.arrayCompare(buffer, (short) (OFFSET_CDATA + 2), keyStore.ERCA_KID, (short) 0, KID_LENGTH) == 0) {// KID is EUR_KID
                    keyStore.selected_KID = keyStore.ERCA_KID;
                    keyStore.selectedPublicKey = keyStore.eurPublicKey;
                    keyStore.Selected_Cert = null; // ERCA public key is selected
                    return;
                } else if (Util.arrayCompare(buffer, (short) (OFFSET_CDATA + 2), keyStore.VUCA_Cert.CHR, (short) 0, KID_LENGTH) == 0) {// KID is MSCA_KID
                    keyStore.Selected_Cert = keyStore.VUCA_Cert;
                } else if (Util.arrayCompare(buffer, (short) (OFFSET_CDATA + 2), keyStore.VU_Cert.CHR, (short) 0, KID_LENGTH) == 0) { // KID is VU_KID
                    keyStore.Selected_Cert = keyStore.VU_Cert;
                } else {
                    ISOException.throwIt(SW_REFERENCE_DATA_NOT_FOUND);
                }// KID not found
                keyStore.selectedPublicKey = keyStore.Selected_Cert.publicKey;
                keyStore.selected_KID = keyStore.Selected_Cert.CHR;
            } else { // if the KID is already set, just return
                return;
        } else {
            ISOException.throwIt(ISO7816.SW_WRONG_P1P2);
    private void processSelectFile(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        short lc = (short) (buffer[OFFSET_LC] & 0x00FF);
        // retrieve p1p2 from apdu buffer
        byte p1 = buffer[OFFSET_P1];
        byte p2 = buffer[OFFSET_P2];
        short p1p2 = Util.makeShort(p1, p2);
        apdu.setIncomingAndReceive();
        if (p1 == 4) {
            if (lc == (short) TACHO_AID_LENGTH) {
                if (Util.arrayCompare(buffer, (short) OFFSET_CDATA, TACHOGRAPH_AID, (short) 0, (short) TACHO_AID_LENGTH) == 0) {
                    selectedFile = fileSystem.getDT();
                    fileSystem.selectDT();
                    volatileState[0] |= FILE_SELECTED;
                    return;
                } else {
                    ISOException.throwIt(ISO7816.SW_WRONG_DATA);
            } else if (lc != 2) {
                ISOException.throwIt(SW_WRONG_LENGTH);
            short fid = Util.getShort(buffer, OFFSET_CDATA);
            if (fileSystem.getFile(fid) != null) {
                selectedFile = fileSystem.getDT();
                fileSystem.selectDT();
                volatileState[0] |= FILE_SELECTED;
                return;
        } else if (p1 == 2) {
            if (lc != 2) {
                ISOException.throwIt(SW_WRONG_LENGTH);
            short fid = Util.getShort(buffer, OFFSET_CDATA);
            if (fileSystem.getFile(fid) != null) {
                selectedFile = fileSystem.getFile(fid);
                volatileState[0] |= FILE_SELECTED;
                return;
        } else {
            ISOException.throwIt(ISO7816.SW_WRONG_P1P2);
        setNoFileSelected();
        ISOException.throwIt(ISO7816.SW_FILE_NOT_FOUND);
    public static void setNoFileSelected() {
        if (hasFileSelected()) {
            volatileState[0] ^= FILE_SELECTED;
    public static boolean hasFileSelected() {
        return (volatileState[0] & FILE_SELECTED) == FILE_SELECTED;
    public static boolean hasMutuallyAuthenticated() {
        return (volatileState[0] & MUTUAL_AUTHENTICATED) == MUTUAL_AUTHENTICATED;
    static boolean isLocked() {
        return (persistentState & LOCKED) == LOCKED;
    public boolean isSelectedFileEncrypted() {
        return ((selectedFile.getAccessConditions() & DigitalTachograph.ENCRYPTED) == DigitalTachograph.ENCRYPTED);
}

Getting started with JCOP Tools

I have a working Eclipse + JCOP Tools installation, activated. I now also have a Cardman reader (drivers loaded) and some blank JCOP30 cards. I read through the Eclipse embedded JCOP help page, but couldn't find the answers to some simple questions:
1. How can I see a list of connected readers to ensure my reader hardware is recognized? I read earlier on the forums about a "Launch Configuration page". How do I access this page?
2. The JCOP Shell seems to be working... my cards are blank and /terminal does show "Slot empty" or "Card present" so I presume the interface is running fine. My cards are totally blank. Can I still read any useful info from them such as vendor strings, version#, etc?
3. Do the JCOP Tools 3.1.2 come with a sample project? Since I've never used this environment, I would love to see an example of working code that can be simulated or loaded onto a physical card. It would help me "learn by example"
If there is sample code, where can I find it? I tried to use Eclipse's import from archive but didn't find anything resembling samples within jcop tools. Any example you know of would be great.

Here is the ATR and cplc output for my card. So far I know with certainty it's JCOP30-something and it supports T=CL.
But I'm not even sure which Java Card and Global Platform it supports! The "JCOP version map" from the 2003 specs document says JC 2.1.1 and GP 2.0.1, but http://www-306.ibm.com/software/wireless/wecos/jcop30.html says these cards are JC 2.2.1 and GP 2.1.1. Yikes! Which do I have?
cm> /atr
resetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B 86 80 01 4A 43 4F 50 33 30 12                   ;...JCOP30.
ATR: T=0, T=1, Hist="JCOP30"
cm> get-cplc
=> 80 CA 9F 7F 00                                     .....
(11274 usec)
<= 9F 7F 2A 40 70 95 16 40 51 30 84 30 1A 61 12 00    ..*@[email protected]..
    69 00 90 95 59 40 70 61 19 00 00 00 00 06 31 13    [email protected].
    30 36 39 30 30 00 00 00 00 00 00 00 00 90 00       06900..........
Status: No Error
IC Fabricator                      : 4070
IC Type                            : 9516
Operating System ID                : 4051
Operating System release date      : 3084 (25.3.2003)
Operating System release level     : 301A
IC Fabrication Date                : 6112 (22.4.2006)
IC Serial Number                   : 00690090
IC Batch Identifier                : 9559
IC Module Fabricator               : 4070
IC Module Packaging Date           : 6119 (29.4.2006)
ICC Manufacturer                   : 0000
IC Embedding Date                  : 0000
IC Pre-Personalizer                : 0631
IC Pre-Perso. Equipment Date       : 1330 (26.11.2001)
IC Pre-Perso. Equipment ID         : 36393030
IC Personalizer                    : 0000
IC Personalization Date            : 0000
IC Perso. Equipment ID             : 00000000

JCOP tools without GUI

Hello,
i would like to know, what scripts is JCOP tools exactly running while building Java files (generating class files) and converting them to CAP files. I.e. what does "Build autoimatically" exactly do in ECLIPSE IDE with JCOP plug-in? What .jar files are also used?
I.e. i want to be able to rebuild my Java Card projects for different version os java cards without opening the Eclipse IDE, openning projects and building them in IDE.
I would appreciate nay information.
Thanks a lot,
best regards,
newbie.

Hello.
Thanks a lot lexdabear for your reply.
The post you've noticed above was very useful for me. I have solved the problem with tric.jar and also would like to add my 50 cents regarding some solutions proposed by Lillesand.
The error listed below can be simply avoided by explicitly declaring the whole name of the applet, i.e. -a 0xF3:0xF3:0xF3:0xF3:0xF3:0xA1:0xA1:0xA1:0xA1:0xA1 no.qfree.keyexport.KeyDiversification.
E:\tools\captest2>java -cp e:\eclipse\plugins\com.ibm.bluez.jcop.eclipse_3.1.2\tric.jar com.ibm.jc.apps.tric.jc.Converter
-dd e:\tools\captest2\
-cp e:\workspace\KeyExport\bin\;e:\tools\java_card_kit-2_2_2\lib\api.jar
-ep E:\tools\java_card_kit-2_2_2\api_export_files
-a 0xF3:0xF3:0xF3:0xF3:0xF3:0xA1:0xA1:0xA1:0xA1:0xA1 KeyDiversification 0xF3:0xF3:0xF3:0xF3:0xF3:0xA2:0xA2:0xA2:0xA2:0xA2 StringStorage
no.qfree.keyexport 0xF3:0xF3:0xF3:0xF3:0xF3 1 0
Error: class java.lang.RuntimeException, no such applet class LKeyDiversification; found in package no/qfree/keyexportAlso my there are some facts that i have figured out during the usage of tric.jar through command line:
1. Eclipse IDE produces slightly different .class files than i do by using
javac -source 1.3 -target 1.2 -g options during the compilation. May be it uses additional options?
2. Perhaps, as a result, a bit different CAP files are produced that the ones built automatically using Eclipse IDE GUI. Those CAP files also slightly differ in size (usually smaller tha mines). The only components that differ in size are:
Method.cap
Debug.cap.
The files produced through command line work just fine. I guess, that JCOP tools may additionally optimize the .class files to produce a bit smaller .CAP files.
3. Regarding the version information JCOP tools tric.jar produces
CAP files with version M=2, m=1 when using JC211 API, and
CAP files with version M=2, M=2 when using JC221.
I also converted the same files uding JCDKv2.2.1. It produces CAP files of version M=2, M=1.
In my opinion, all the problems that occured in the aforementioned post by Lillesand were caused by wrong usage of the JC2.2.2 export files.
I totally agree with you, lexdabear regarding choosing only one solution. In case you are using JCOP tools (through GUI or command line) you must use JCOP JC API .jar files and tric.jar converter.
If you are using JCDK, you must use its api.jar library with export files and converter from JCDK (coverter.bat).
I hope this info might be useful.
Best regards,
Eve
Edited by: Ieva on Nov 5, 2007 4:11 AM

Java card cap file install error in jcop tools

When i try to run java card applet in real java card it gives this error.i used jcop tools and java version 1.5 and eclipse 3.2.when i run the applet in simulater it works fine.i saw some document it says allocate memory for the installation process.i don't know how to do that.
/term "winscard:4|SCM Microsystems Inc. SCL010 Contactless Reader 0"
--Opening terminal
> /card -a a000000003000000 -c com.ibm.jc.CardManager
resetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B 8A 80 01 4A 43 4F 50 33 31 56 32 33 32 7A       ;...JCOP31V232z
ATR: T=0, T=1, Hist="JCOP31V232"
=> 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00          ..............
(23807 usec)
<= 6F 65 84 08 A0 00 00 00 03 00 00 00 A5 59 9F 65    oe...........Y.e
    01 FF 9F 6E 06 47 91 73 51 2E 00 73 4A 06 07 2A    ...n.G.sQ..sJ..*
    86 48 86 FC 6B 01 60 0C 06 0A 2A 86 48 86 FC 6B    .H..k.`...*.H..k
    02 02 01 01 63 09 06 07 2A 86 48 86 FC 6B 03 64    ....c...*.H..k.d
    0B 06 09 2A 86 48 86 FC 6B 04 02 15 65 0B 06 09    ...*.H..k...e...
    2B 85 10 86 48 64 02 01 03 66 0C 06 0A 2B 06 01    +...Hd...f...+..
    04 01 2A 02 6E 01 02 90 00                         ..*.n....
Status: No Error
cm> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
cm> init-update 255
=> 80 50 00 00 08 AC B1 90 01 BF 2D 24 A0 00          .P........-$..
(49906 usec)
<= 00 00 91 18 01 39 93 95 05 59 FF 02 00 2C BE 39    .....9...Y...,.9
    5E A5 07 55 87 B8 C3 A8 A6 93 66 2B 90 00          ^..U......f+..
Status: No Error
cm> ext-auth plain
=> 84 82 00 00 10 0C AE 50 3E C8 7E 1D 92 29 E2 59    .......P>.~..).Y
    08 D9 DA 02 16                                     .....
(57276 usec)
<= 90 00                                              ..
Status: No Error
cm> delete 060504030201
=> 80 E4 00 00 08 4F 06 06 05 04 03 02 01 00          .....O........
(40041 usec)
<= 6A 88                                              j.
Status: Reference data not found
jcshell: Error code: 6a88 (Reference data not found)
jcshell: Wrong response APDU: 6A88
Ignoring expected error
cm> delete 010203040506
=> 80 E4 00 00 08 4F 06 01 02 03 04 05 06 00          .....O........
(17392 usec)
<= 6A 88                                              j.
Status: Reference data not found
jcshell: Error code: 6a88 (Reference data not found)
jcshell: Wrong response APDU: 6A88
Ignoring expected error
cm> upload -d -b 250 "Cap File location"
=> 80 E6 02 00 13 06 01 02 03 04 05 06 08 A0 00 00    ................
    00 03 00 00 00 00 00 00 00                         .........
(32303 usec)
<= 00 90 00                                           ...
Status: No Error
=> 80 E8 00 00 FA C4 81 F2 01 00 23 DE CA FF ED 02    ..........#.....
    02 04 00 01 06 01 02 03 04 05 06 12 68 6D 73 2F    ............hms/
    6A 61 76 61 63 61 72 64 2F 68 65 6C 6C 6F 02 00    javacard/hello..
    21 00 23 00 21 00 0A 00 0B 00 1E 00 0E 00 3D 00    !.#.!.........=.
    0A 00 0B 00 00 00 4D 01 BE 00 00 00 00 00 00 01    ......M.........
    01 00 04 00 0B 01 02 01 07 A0 00 00 00 62 01 01    .............b..
    03 00 0A 01 06 06 05 04 03 02 01 00 08 06 00 0E    ................
    00 00 00 80 03 00 FF 00 07 01 00 00 00 1C 07 00    ................
    3D 00 01 10 18 8C 00 05 7A 05 30 8F 00 00 3D 8C    =.......z.0...=.
    00 01 18 1D 04 41 18 1D 25 8B 00 02 7A 02 21 18    .....A..%...z.!.
    8B 00 03 60 03 7A 19 8B 00 04 2D 1A 04 25 73 00    ...`.z....-..%s.
    09 00 00 00 00 00 0F 11 6D 00 8D 00 06 7A 08 00    ........m....z..
    0A 00 00 00 00 00 00 00 00 00 00 05 00 1E 00 07    ................
    01 00 02 00 06 00 00 01 03 80 03 02 03 80 03 03    ................
    03 80 0A 01 06 80 03 00 06 80 07 01 09 00 0B 00    ................
    00 00 07 05 06 04 0A 07 07 13 0B 00 4D 01 00 00    ............M...
(764519 usec)
<= 6A 80                                              j.
Status: Wrong data
jcshell: Error code: 6a80 (Wrong data)
jcshell: Wrong response APDU: 6A80
Unexpected error; aborting execution

Thanks ReNa
i am using nxp jcop 31 contact-less card.and it will support for java card 2.2.1 and global-platform card specification 2.1.1 .so i am using nxp jcop training 2007 tools and it has java card 2.2.1 and global-platform card specification 2.1.1.Inside my project there are three jar files these are jc221.jar and gp211.jar and bio10.jar
i will appreciate your help
Thanks

Using JCOP tools under Linux

Hello.
I looked through the older web sites of IBM regarding the usage of JCOP tools under Linux.
I am interested in following questions:
1. Is there any separate distributon version of JCOP tools for Linux?
2. Can sample JCOP tools 3.1.2 plugin (for Windows) be used under Linux. What has to be modified? Also what additional tools have to be installed an used for communication with real cards through PC/SC readers.
3. Is JCOP simulation option available under Linux?
I'll appreciate any help.
Best regards,
newbie

newbie2007 wrote:Hello.
I looked through the older web sites of IBM regarding the usage of JCOP tools under Linux.
I am interested in following questions:
1. Is there any separate distributon version of JCOP tools for Linux?
2. Can sample JCOP tools 3.1.2 plugin (for Windows) be used under Linux. What has to be modified? Also what additional tools have to be installed an used for communication with real cards through PC/SC readers.
3. Is JCOP simulation option available under Linux?
I'll appreciate any help.
Best regards,
newbieEverything should work, except for the target pack and the non-existent Linux Pegoda driver.1. The is no seperate Linux distribution. You just need a Linux distribution for Eclipse.JCOP Tools plugin should work under Linux, except for the target pack and the non-existent Pegoda driver for Linux.1. There is no seperate Linux distribution. You just need the Linux distribution for Eclipse.
2. Prior to JCOP Tools 3.1.2 the last time something was mentioned about Linux was in the release notes of 3.1.1b . In version 3.2.0 IBM added a linux_support page to the JCOP Tools user guide (see release notes and linux_support page below).
3. There shouldn't be any problems with the generic simulation. The target pack runs only with Windows though.
h1. Release Notes
h2. Version
JCOP Tools 3.1.1.b (Bärlach)
h2. What's new?
h3. 3.1.1.b
<ul><li>New simulation (fixed static obj/arr bug, fixed instance field token bug).</li>
<li>Applet privileges can now be specified in the launch configuration dialog.</li>
<li>The "exportmap" feature is now available.</li>
<li>The JCOP Performance Test Demo ("JCOP Factor") is now included.</li>
<li>Minor bug fixes.</li>
</ul>
h2. Known problems
<ul><li>Simulations do not run (Linux, MacOS X)
     The Eclipse update manager does not set the execute permission bits for the simulations. You need to manually <code>chmod 755</code> those files in ECLIPSE/plugins/com.ibm.bluez.jcop.eclipse_3.1.1.x/simuls/
</li>
<li>PC/SC Support (Linux)
     JCOP Tools only works with pcsc-lite 1.2.0.
</li>
</ul>
h2. Frequently Asked Questions
Please refer to the online FAQ at http://www.zurich.ibm.com/jcop/download/eclipse/faq/.
h2. Bug Reports
Please send bug reports to [email protected]. Make sure you include the following:
<ul><li>Problem description</li>
<li>Steps to reproduce</li>
<li>Eclipse version and build number (Help > About)</li>
<li>JCOP Tools version (Help > About; click on BlueZ icon)</li>
</ul>
h2. Using JCOP Tools with Linux (>= 3.2.0)
h3. ___
Overview
The current JCOP Tools release now also offer a version for the popular Linux
operating system. Both the Windows and Linux verson provide more or less the same
functionality, and JCOP application development can thus fully succeed on Linux systems.
Nevertheless, installation of the JCOP Tools differ between Windows and Linux
where the Linux version does not provide a simple installer as in case of Windows.
Additionally, the Linux version expects a properly setup Muscle PCSC installation
as soon as you want to use them together with physical, real cards. As Muscle
PCSC is still not shipped with most Linux distributions, you must download and
install them separately from the JCOP Tools.
h3. ___
Contents
h3. ___
Software Requirements
Linux distribution
The JCOP Tools simulation has been developed on a Fedora Core 6 system, but should also work in case of
many other recent Linux distributions.
Java Development Kit
The JCOP Tools have been developed and tested with the Sun JDK 1.4.2_13-b06
for Linux. Your success with other Development Kits may vary as there are
partly subtle differences across the different devlopment kits.
PCSC
The JCOP Tools use PCSC to talk with real cards on Linux. Most distributions
do not ship with Linux PCSC by default (Fedora Core 6 does), you must thus download it fromhttp://www.linuxnet.com
and install it by yourself. If you are used to software installation under Linux,
and are not afraid of compiling and installing software packages, this should
not be a hard problem. You have to download both the base PCSC package
(including PCSC daemon and client libraries) and separately the driver
for the reader you want to use. The PCSC package contains a test program
which should tell you whether your installation is set up correctly and
communicating with a card works. The JCOP Tools have been reported to
work together with Muscle PCSC version 1.3.1-7.
JPCSC
The JCOP Tools are shipped with JPCSC which you can also download athttp://www.linuxnet.com. JPCSC
is a JNI library which offers Java applications the access to PC/SC functions
by mapping their requests to an underlying native PC/SC implementation. The JCOP
Tools - mostly written in Java - thus depend on JPCSC to communicate with real cards
on Linux. JPCSC depends on a properly installed and setup PC/SC environment.
Especially, the JAVA_LIBRARY_PATH should list the directories where the
PC/SC client libraries and the native JPCSC library libjpcsc.so ( downloadable as binary from
Windows Binary Download Here )
are installed, the CLASSPATH variable should list th___
Miscellaneous
What should work
As soon as you setup your system correctly, there should only be minor differences
between using JCOP Tools on Windows or on Linux. Emulating a real JCOP,
debugging, shell, cap-file conersion should all be possible as in case of Windows.
What is missing
No drivers or tools are currently available for using JCOP30's in contactless
mode. If you need such support, please contact directly NXP
at for further assistance.
Copyright 2001,2007 IBM Corp. All rights reserved.
Edited by: lexdabear on Sep 28, 2007 4:13 PM (I hate the new edit)

Unknown Error with JCop Tools 3.1.2

Hello All ,
I am using Eclipse program to create a javacard applet...
But there is a unknown Problem appears to me ..I don't know how to solve it.
First of All ,
My OS is Windows 7 x64 bit
My java version is : 1.6
My Eclipse version is : 3.2
My Smart Card Reader is : Omnikey ,CardMan 5321
So First of All , i added the plugin "JCOP tools 3.1.2" to the Eclipse program , and i activated the tools successfully.
and i created a new javacard project by using Basic Javacard template
Now when i want to Run ,
SO i when i set the Run options to Card Reader , and set the card reader to "OmniKey"
like this image:
[Image 1|http://img85.imageshack.us/img85/1158/runx.jpg]
-By the way , i don't understand where "Philps Pegoda Reader" came from?? -
Then when i press Run , the Eclipse program will be closed and this error appears:
[Error Image|http://img135.imageshack.us/img135/2926/errorevs.jpg]
I am not sure what is the problem ... so please some one help me here...
Thank you for your time
Edited by: ahmed30 on May 25, 2010 8:44 AM

Hi,
The pegoda reader is the default reader that has hard coded support (like JCOP engineering sample cards). I would say this is because NXP was founded by Phillips.
I cannot help you with the second issue. I have only used JCOP 3.1.2 for a short time (quite a while ago now) and reverted to 3.1.1.b as 3.1.2 did not add any new features and from memory did not work properly on my WIndows XP machine (32-bit). I can confirm that 3.1.1 works on XP 64-bit under a 32-bit JVM.
Is the issue when running against a card or the simulator or both?
You could try running the jcop.exe executable in the plugins\com.ibm.bluez.jcop.eclipse_<version>\simuls\nJCOP\win32\x86 directory from a command prompt to see if it is an issue with Eclipse/Java or the JCOP simulator.
Cheers,
Shane

Berkeley DB XML Can't load 32-bit .dll on a 64-bit platform Netbeans

Hi I am trying to use Berkely DB in netbeans java on 64-bit windows platform. I have downloaded and configured JDK 7 32 bit in project properties. It works well for a simple java project but when i do the same for a web application in netbeans for glassfish or Apache Tomcat Servers it gives this exception
[Servlet execution threw an exception] with root cause
java.lang.UnsatisfiedLinkError: C:\Program Files (x86)\Oracle\Berkeley DB XML 2.5.16\bin\libdb_java48.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform
     at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1803)
     at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1728)
     at java.lang.Runtime.loadLibrary0(Runtime.java:823)
     at java.lang.System.loadLibrary(System.java:1028)
     at com.sleepycat.db.internal.db_javaJNI.<clinit>(db_javaJNI.java:38)
     at com.sleepycat.db.internal.DbEnv.<init>(DbEnv.java:264)
     at com.sleepycat.dbxml.XmlManager.<init>(XmlManager.java:77)
     at com.sleepycat.dbxml.XmlManager.<init>(XmlManager.java:101)
This problem was also coming before for simple java app but it resolved after configuring jdk in project properties but for web application its not working

XML berkley db doesnt seem to support the java 64 bit model.
In our Java application we get this error when using JRE7 but not JDK7 or JRE6
The difference seemed to be that in JDK7 and JRE6 you can use java -D32, but thats not possible in JRE7 (you must use java -D64. So it seems to be a difference in JRE7 and JDK7 as well
best regards,
Tom-Erik

How to install SOA 10g on Windows 7 64-bit platform?

Hi Friends
How to install SOA 10g on Windows 7 64-bit platform ?
I've downloaded the 64-bit version downloadable from OTN and able to run the irca.bat on DB 10.2.0.3 however the SOA Installer fails at BPEL Config Assistant step with errors :
deploy-applications:
Deploying Oracle BPEL Process Manager ...
Copying 1 file to C:\SOA134\bpel\system\services\lib
Copying 1 file to C:\SOA134\bpel\system\services\lib
Copying 1 file to C:\SOA134\bpel\system\services\lib
Updating jar: C:\SOA134\bpel\system\services\lib\orabpel.ear
Running batch script by:
java admin_client.jar deployer:oc4j:opmn://<domain name>:6003/oc4j_soa -script C:\SOA134\bpel\system\services\install\ant-tasks/bpel_deployapps.txt
Failed at "Could not get DeploymentManager".
This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.

Hi,
We know now why SOA Installer fails...
Now we need to know why you can not start OC4J properly. What do you see in the log files?
https://forums.oracle.com/forums/ann.jspa?annID=893
Cheers,
Vlad

Adobe PDF iFilter 9 for 64-bit platforms not working!

I am using window 7 and adobe reader 9. I cant search using keywords that can be found in pdf content. I've indexed those files but the same thing still happen! After a series of installation of ifilter > rebuild index >restart > unistall > restart > reinstall >rebuild>restart.........
somehow two or three files can be search by typing keywords in their content but still not all! Can someone help?!

hi Phillip
i am not sure what you mean
I downloaded the ifilter and installed it
then configured everything as shown in the pdf file
I tried indexing from scratch exactly as i did successfully in the other computer
and got some errors in the log file
i checked the sql server log and the event viewer logs and got :
Error '0x80004005' occurred during full-text index population for table or indexed view '[Pirsumim_ext_ck].[dbo].[T_PUBLICATIONS]' (table or indexed view ID '2073058421', database ID '14'), full-text key value 0x0000027A. Attempt will be made to reindex it.
The component 'PDFFilter.dll' reported error while indexing. Component path 'C:\Program Files\Adobe\Adobe PDF iFilter 9 for 64-bit platforms\bin\PDFFilter.dll'.
Informational: Full-text retry pass of Full population completed for table or indexed view '[Pirsumim_ext_ck].[dbo].[T_PUBLICATIONS]' (table or indexed view ID '2073058421', database ID '14'). Number of retry documents processed: 1. Number of documents failed: 1.
Changing the status to MERGE for full-text catalog "Pirsumim_ext_catalog_ck" (5) in database "Pirsumim_ext_ck" (14). This is an informational message only. No user action is required.
Informational: Full-text Auto population initialized for table or indexed view '[Pirsumim_ext_ck].[dbo].[T_PUBLICATIONS]' (table or indexed view ID '2073058421', database ID '14'). Population sub-tasks: 1
the same dll worked fine in another computer...
how can i see more details what is wrong with this dll ?
meidad

Adobe PDF iFilter 9 for 64-bit platforms + temp folders in the root

Adobe PDF iFilter 9 for 64-bit platforms creates temp folders for some pdfs with attachments in the root of Windows Server 2008 R2 x64 bit machine. Do you know how to solve it?

After having tried all the different suggestions out there I "stumbled" on the REAL solution to this problem (for me at least).
Ensure that the "Windows Search" service has "Allow service to interact with desktop" enabled:
After enabling this you need to restart the service.
Please note that this fix alone (not doing anything else) solves the problem :-)
/Tom

Adobe PDF iFilter 9 for 64-bit platforms does not index my PDF files with Digital Sign

Adobe PDF iFilter 9 for 64-bit platforms does not index my PDF files with Digital Sign, why?

hi Phillip
i am not sure what you mean
I downloaded the ifilter and installed it
then configured everything as shown in the pdf file
I tried indexing from scratch exactly as i did successfully in the other computer
and got some errors in the log file
i checked the sql server log and the event viewer logs and got :
Error '0x80004005' occurred during full-text index population for table or indexed view '[Pirsumim_ext_ck].[dbo].[T_PUBLICATIONS]' (table or indexed view ID '2073058421', database ID '14'), full-text key value 0x0000027A. Attempt will be made to reindex it.
The component 'PDFFilter.dll' reported error while indexing. Component path 'C:\Program Files\Adobe\Adobe PDF iFilter 9 for 64-bit platforms\bin\PDFFilter.dll'.
Informational: Full-text retry pass of Full population completed for table or indexed view '[Pirsumim_ext_ck].[dbo].[T_PUBLICATIONS]' (table or indexed view ID '2073058421', database ID '14'). Number of retry documents processed: 1. Number of documents failed: 1.
Changing the status to MERGE for full-text catalog "Pirsumim_ext_catalog_ck" (5) in database "Pirsumim_ext_ck" (14). This is an informational message only. No user action is required.
Informational: Full-text Auto population initialized for table or indexed view '[Pirsumim_ext_ck].[dbo].[T_PUBLICATIONS]' (table or indexed view ID '2073058421', database ID '14'). Population sub-tasks: 1
the same dll worked fine in another computer...
how can i see more details what is wrong with this dll ?
meidad

Instructions for Downloading and Activating the JCOP Tools

In response to my question:
I refer to JCOP Tools available on Eclipse.
If the plug-in free for download?
If it is not, kindly provide a proper hyperlink from which those interested can place their order.Listed below is the reply from IBM. Can anyone who has successfully obtained the activation code this way confirm whether you need to foot the postage?
Cheers!!!!
There is no charge for the JCOP Tools. The tools are provided as-is with no warranty or support. Instructions for downloading and activating the tools follow.
Please note that because our Java Card operating system is now available for more than one silicon vendor, IBM will no longer act as a distributor for sample cards. If you require a sample card, you must now approach the silicon vendors directly . Our current silicon partners are Philips Semiconductor, Samsung and Sharp. In addition you may be able to obtain JCOP sample cards from suppliers on this list http://www.zurich.ibm.com/jcop/order/cards.html
JCOP Tools are subject to US Government Export Controls, and therefore each install has to be activated individually to ensure compliance. Please follow the instructions below for each copy of the tools that need to be activated.
Prerequisites:
   1. If you do not already have a Java Runtime Environment (JRE) installed, download and install a JRE or JDK. You can do so from this website (http://java.sun.com/j2se/1.4.2/download.html). Please note that we recommend the use of JRE version 1.4.2.
   2. If you do not already have the open source software development environment Eclipse installed, download and install Eclipse (http://www.eclipse.org/), You can do so from this website(http://www.eclipse.org/downloads/index.php). JCOP Tools require Eclipse 3.1
To download the tools and start install:
   1. Download the current Update Site image from here (http://www.zurich.ibm.com/jcop/download/eclipse/image/tools.zip)
   2. Unzip the downloaded file to a location of your choice
   3. Start the Eclipse IDE
   4. From the menu bar click on Help > Software Updates > Find and Install
   5. In the Install/Update Dialog select Search for new features to install
   6. Click Next
   7. Click on New Archived Site . . . and browse to the location chosen in step 2
   8. Select the file tools.zip
   9. Click Open then OK then Finish
10. Eclipse Update Manager will start to install the plug-in, continue with the install as needed.
For an activation code please send me ([email protected]) the following information:
   1. Your full postal address - the serial number will be sent via International Courier for US Export control reasons.
   2. Your contact telephone number
   3. The serial number of your JCOP tools install
   4. Your planned usage/reason for needing the JCOP tools
   5. If a student, a copy (fax or digital photo) of your student ID
For the serial number (item 3 above):
   1. Ensure you have downloaded and installed the JCOP Tools
   2. Start the Eclipse IDE
   3. From the menu bar click on File > New > Project
   4. In the New Project Dialog expand the Java Card folder
   5. Select Java Card Project
   6. Click Next
   7. You should now see the JCOP Licensing Wizard
   8. Click Next
   9. Select Verify an Activation Code
10. Click Next
11. The Serial Number should appear on the next page, above the Activation Code entry fields.
12. Once you have that number click on Cancel then Abort (Note: the Java Card project choice will be disabled until the next time you restart Eclipse)

For those who are interested to use the JCOP simulator for a start, I have checked that the plug-in and feature files (in tools.zip) for Eclipse are still available at IBM site, please download and install yourself.
I still keep a copy of user guide for JCOP tools (version 3.1.1a) and the contents are still relevant to Version 3.1.1b simulator in tools.zip.
If you are interested to have a copy of such document, kindly drop me an email to [email protected]

32-bit Windows 7 app on 64-bit platform oddity

An application compiled for a 32-bit platform runs correctly with an SDK that is compiled for 32-bit only, either in debug or release mode from Visual C++ Express 2008, on a 64-bit computer.
The target platform in the compiler options is set as X86. The compilation is for Win32.
However, when the release version is run outside of Visual C++ - that is, on its own, as an app - the SDK thinks the app is 64-bit, and returns an error of "not supported" (the SDK error message).
The application is mixed unmanaged and managed code, where the bulk of the routines are unmanaged with #pragma unmanaged at the top of the file after includes. The managed code portion is just for a few routines to use the MicroChip software. Thus
the code is compiled with the /clr option.
The application interfaces to a number of other 32-bit DLLs with no problem. The application has been working fine under all of these conditions for some time, and in different installations.
However, the new SDK that was just recently added, appears to be using some information somewhere to think it is running 64-bit, in stand-alone release mode only. It works fine when run under Visual C++ either in debug mode or release
mode.
I have looked all over for any other option that needs to be set to 32 bit for the SDK to know that it is working in a 32-bit app, albeit on a 64-bit platform. (There is no support for the SDK.)
Are there any computer settings that have to be changed?
Thanks for any suggestions. Btw, the problem also occurs on VC ++ 2010 Express.

For assistance with application development you need to go to the MSDN forums found @
https://social.msdn.microsoft.com/Forums/en-US/home
This is an end-user forum and does not address application development.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Native dll lib and 64-bit/32-bit platform

Dear All:
My java app uses a customized native dll. My question is, if I want JWS to work on both 32- and 64-bit platforms (maybe more accurate, JRE), do I have to compile the DLL into 32 and 64 bit versions and configure JNLP so that it can identify the underlying JRE and use the proper dll? If so, how?
Also, I tried to specify the dll in such a way as <nativelib href="products/signed-xyzLib.dll.jar"/> but it give me exception that shows the system looks for the dll in firefox or jre/bin's directory, even thou the dll is downloaded and resides in the temporary cache (in my Windows 7, it's like: .../AppData/LocalLow/Sun/Java/Deployment/cache/... ). Why is it not found by the system (javaws, I suppose) ?
Thanks,
Johnny

well, I consulted this link (http://www.velocityreviews.com/forums/t126704-java-webstart-and-jni.html) before I posted my question. It says I need to wrap the DLL into a jar file first. and after JWS is launched, the dll file in question was unpacked and resided in the user cache. I am not sure if it's necessary but it seems doesn't hurt.
Thanks,
John

JCOP tools on 64-bit platform

Similar Messages

Maybe you are looking for