JCOP tools plugin is unable to upload the applet

Greetings.
I have installed Eclipse 3.3 and JCOP tools (activated). We got ready Java Card applet and my task is to upload it into the Java Card. Firstly I want test it on a simulator.
The applet compiled successfully and the .CAP file is created. But when upload -d "blah blah blah .cap" command is executed either by me or by jcshell, it returns immediately and I don't actually see any data transmitted to the card (in this case simulator). After the card-info command is executed I see this:
Card Manager AID : A000000003000000
Card Manager state : OP_READY
Load File : LOADED (--------) A0000000035350 (Security Domain)
Module : A000000003535041
Load File : LOADED (--------) 01020304054F5449
Module : 0102030405
The last file has AID of my applet. But I know it is not there (on the card). When I run install command it does not return. I get nothing. JCOP tools seems to be busy and working but no response... neither error code nor exception.
I'm stuck with this issue three days already. Could anybody help me?
Thank you in advance.
Best regards, Greg
Software engineer at OTI
Edited by: neutrino on Oct 31, 2007 6:01 AM

Hi.
It is advised to install Eclipse 3.1.2, jdk 1.4.2 for JCOP tools plug-in 3.1.1.b/3.1.2.
Also, regarding the usage of JCOP shell, write:
/mode trace=on
before uploading of your cap file to trace all the APDUs.
Best regards,
Eve
Edited by: Ieva on Oct 31, 2007 6:38 AM

Similar Messages

Unable to upload the updated/modified Report template (rtf file) in siebel

Hi,
I am unable to upload the updated/modified Report template (rtf file) if already exists in the local database.
Initially I have uploaded a rtf template, generated xliff, registered it and can view the report from the registered view. Later I have made few changes to the rtf template, in the reports template view, I have uploaded this. When i run the report in the registered view, I am able to see the earlier version and it doesnt show me the updated changes.
I am using 8.1.1.3 siebel and BIP 10.1.3.3.1 on local.
Looking at the metalink found "How To Upload Modified RTF Template Files In The Siebel Application For BI Publisher Reporting [ID 1136418.1]" which is related to server but I am working on local database
Please find attached the template, xml file. can you please look into this and update me ASAP
Thanks,
RV

Hi,
Not able to find Report - Standard templates or Report - Custom templates view in Administration - BIP reports in Siebel 8.1.1.3?
We have applied 8.1.1.3 patch on 8.1.1.0
below are the steps followed
Reports are not generated after 8.1.1.3 patch installtion.
we have also followed to below steps mentioned for this issue in oracle support.
"In order to resolve this behavior it is necessary to ensure that the 8.1.1.3 FixPack has been applied to the Siebel Tools installation. This will provide an additional .zip file in the REPPATCH folder of the Siebel Tools installation. Once this has been done please then follow the configuration steps as documented :
change sysprefix to X_ before sif import and chage back to SBL_ after sif import.
1) Import the sif files from Siebel\8.1\Tools_1\REPPATCH\12-1VMBCSV.zip
2) Import the 4 SIF files in the following order:
S_XMLP_REP_TMPL_02112010.sif
SBL_XMLP_REPORT_SELECTION_FLG.sif
Report Template BC.sif
Report Template Registration Applet.sif
3)Apply the DDL for table S_XMLP_REP_TMPL and compile repository
Once the above steps have been completed the Selected Record flag will appear in the Report Template Registration views."
we still not able to generated able to generate reports even after following above steps.
Thanks
Sean

Unable to upload the PAR from NWDS

Hi ,
I am unable to upload the par from NWDS as it is throwing the error "Unable to upload"
I have done the proxy settings in NWDS.
can any one tell me is there any other settings i have to do in NWDS.
Thanks
Ajay

Hi Ajay,
Have you copied the NWDS installed stuff from other system and working on that?
Anyway, you can go about this way to upload your par.
Goto System Administration -> Support -> portal runtime -> Administration console -> Browse and add your par -> say upload. Thats it and your par is uploaded:-).
Hope it helps.
Regards
Deepa
Pls reward points for helpfull answers.

I am unable to upload the latest version of iTunes. It worked before and when prompted uploaded the newest version. Now I'm unable to access iTunes..."Error 7 Windows Error126. Insufficient privileges". What do I do?

I am unable to upload the latest version of iTunes. It worked before and when prompted uploaded the newest version. Now I'm unable to access iTunes..."Error 7 Windows Error126. Insufficient privileges". What do I do?

Hey thomashfrompa,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

I am unable to upload the customer master data using BAPI.?

Hi Guru's,
i am unable to upload the customer master data using BAPI.(BAPI_CUSTOMER_CREATEFROMDATA1)
Please guide me how upload the data...
Thanks in iadvance
Srinivas...

Hello Srinivas
This BAPI does not allow to create a new customer from scratch but only to copy an existing customer to a new one and change its address data.
The reference customer has to be provided using IMPORTING parameter PI_COPYREFERENCE. See also the BAPI documentation for more details.
The BAPI does the same like transaction XD01 with Reference.
Regards
Uwe

Unable to see the logical path and file created in FILE tcode from AL11 and unable to upload the file to this path from front end

Hi Experts,
I have created the logical path and filename in FILE tcode.I am trying to upload the pdf file to application server by using this path.But
I am getting message like "Unable to open the file".Even I cannot find the this path in AL11 tcode.Kindly anyone advise how to upload pdf file using
custom path and file created from FILE tcode.
Thanks & Regards,
Anusha.

Hi Anusha,
Please give as below.
I forget to say you cannot open the PDF in AL11 and for that you need some configuration, i think it can be done using content server,not sure completely please wait for some more suggestions.
Regards,
Pavan

IMP : unable to upload the rtf template

Hi all,
I am getting the following error while uploading the template for a report. Can anyone please tell me what this error is all about and what should be done to correct this .....please treat this as urgent.
*The error I get:
Invalid report definition: ItemCreationDate.xdo missing*
Thanks in advance
Ronny

Hi,
Not able to find Report - Standard templates or Report - Custom templates view in Administration - BIP reports in Siebel 8.1.1.3?
We have applied 8.1.1.3 patch on 8.1.1.0
below are the steps followed
Reports are not generated after 8.1.1.3 patch installtion.
we have also followed to below steps mentioned for this issue in oracle support.
"In order to resolve this behavior it is necessary to ensure that the 8.1.1.3 FixPack has been applied to the Siebel Tools installation. This will provide an additional .zip file in the REPPATCH folder of the Siebel Tools installation. Once this has been done please then follow the configuration steps as documented :
change sysprefix to X_ before sif import and chage back to SBL_ after sif import.
1) Import the sif files from Siebel\8.1\Tools_1\REPPATCH\12-1VMBCSV.zip
2) Import the 4 SIF files in the following order:
S_XMLP_REP_TMPL_02112010.sif
SBL_XMLP_REPORT_SELECTION_FLG.sif
Report Template BC.sif
Report Template Registration Applet.sif
3)Apply the DDL for table S_XMLP_REP_TMPL and compile repository
Once the above steps have been completed the Selected Record flag will appear in the Report Template Registration views."
we still not able to generated able to generate reports even after following above steps.
Thanks
Sean

Hi i have been lucky enough to take delivery of the Nikon D810 but am unable to upload the raw images into LR5 or Photoshop CC 2014 is this just a matter of waiting for a new version of ACR ?? Thanks

Hi i have been lucky enough to take delivery of the Nikon D810 but am unable to upload NEF files into LR5 or Photoshop CC 2014 is this just a matter of waiting for the next version of ACR ???

What version of Camera Raw do you have? Do Help - About Plug-in... - Camera Raw to see.
If it's not 8.5, which is the latest current release as of this writing, you might want to look this over: Camera Raw updates cannot be applied
Just looking over the list here - Camera Raw plug-in | Supported cameras - I don't see the D810 listed at all. Maybe that page isn't updated or maybe the camera is newer than even the newest Camera Raw release, in which case you'll have to wait for Camera Raw 8.6. Note that Adobe often releases beta versions early so the wait may not be that long...
-Noel

I just purchased Adobe Acrobat Standard and am unable to upload the software to my laptop. It is stalled in the Adobe Acrobat Installer.

Do you have any suggestions are why I can't upload the Adobe Acrobat software onto my laptop. It remains stalled in the download screen!

Hi margueritem,
What browser are you trying to download from? Please make sure that you're signed in as an admin, have virus-protection disabled, and try using a different web browser. You can also try downloading directly from Download Acrobat products | Standard, Pro | XI, X - Adobe
Please let us know how it goes.
Best,
Sara

LSMW IBIP Unable to upload the PM operation task list

Dear Experts,
I'm trying to use LSMW to upload Equipment (PM) task list.
I succeed in creating the Header of the task list, but not the operations.
I have created 2 new structures :ZIBIPTLST and ZIBIPTLOP
Source structure is : ZIBIPTLST
u2026u2026u2026u2026u2026 ZIBIPTLOP
Structure relation is :
IBIPTLST    <<<<= ZIBIPTLST
u2026u2026u2026u2026..IBIPTLOP <<<<= ZIBIPTLOP
Field Mapping :
IBIPTLST
TCODE
RECORDNAME
EQUNR     (Equipment number)
PLNNR     (Key for task list group)
PLNAL     (Group Counter)
u2026.
u2026u2026u2026u2026u2026u2026u2026u2026u2026..
IBIPTLOP
TCODE
RECORDNAME
VORNR     (Operation)
ARBPL           (work center)
u2026
Unfortunately, they sre no common fields between IBIPTLST and IBIPTLOP, as you could have between PLKO and PLPO.
I have found an answer about the same issue, explaining that you can add in the structure ZIBIPTLOP , additional fields manually in the Souce field maintenance (adding EQUNR, PLNNR, PLNALu2026).
But then , i have no idea where to make the link between these new fields and the same fields of IBIPTLST.
Can you help, and tell me how to structure my files and my LSMW in order to achieve the creation of the Task list Header and Operation in the same Batch input.
PS :in LSMW, i have created two flat files , one for the header and one for the operation.
Thanks a lot, your detailed answer will be very appreciated !!
Jean-Louis

Hi,
As you said, u will have to add the equipment and group counter id field in IBIPTLOP structure. U also need to identify the two structures with different ID, say header structure ID is 1 and Operation structure ID is 2. Go to step Maintain Source Field, double click on field SID which is created to enter the header and operation data identifier. In identifying field content, enter identifier as 1 for header SID and 2 for operation SID.
You will have to maintain the SID identifier in you data template as well, so that LSMW can easily identify header and operation data.
Below given is how you can create field data.
ZIA01HEADER - Equipment Task List -Header Structure
SID                      SID Header
EQUNR                    Equipment Number
PLNAL                    Group Counter
KTEXT                    Description
ARBPL                    Work center
WERKS                    Maintenance Planning Plant
VERWE                    Usage
VAGRP                    Planner Group
STATU                    Status
STRAT                    Maintenance strategy
ANLZU                    Syst.Condition
STTAG                    Key Date
ZIA01OPERATION - Equipment Task List -Operation Structure
SID                      SID Operation
EQUNR                    Equipment Number
PLNAL                    Group Counter
VORNR                    Operation/Activity Number
UVORN                    Suboperation
ARBPL                    Work center
STEUS                    Control key
WERKS                    Plant
LTXA1                    Operation short text
DAUNO                    Duration
DAUNE                    Normal duration/unit
ARBEI                    Work
ARBEH                    Unit for work
ANZZL                    Capacity required
Hope this will work.

My i tools this error : unable to ascertain the compatibility of i tunes

hi
pleas help me
after update i tunes , my i tools in compatibility of my i tunes

The following fix apparently worked for some: https://www.youtube.com/watch?v=yEgm8m__Ipg

FYI: IBM has quit the JCOP Tools!

Hi,
I just checked the JCOP-Tools news site for new versions and found the following notice:
The JCOP project comes to a close in our lab.The whole team working on JCOP in Zurich says goodbye and thanks all the users of our tools and on-card software.
Please note that no orders for JCOP cards and activation codes can be placed on this website after January 31, 2006.
See it yourself: http://www.zurich.ibm.com/jcop/news/news.html
My suggestion for all developer who are using the JCOP-tools:
Make yourself a backup of the JCOP plugin so you will be able to install it even if the online installation repository isn't available anymore.
At least download the current plugin-file:
http://www.zurich.ibm.com/jcop/download/eclipse/plugins/com.ibm.bluez.jcop.eclipse_3.1.1.b.jar
Additionally you can download the site and feature file, too:
http://www.zurich.ibm.com/jcop/download/eclipse/site.xml
http://www.zurich.ibm.com/jcop/download/eclipse/features/com.ibm.bluez.jcop.eclipse_3.1.1.b.jar
This allows you do perform an offline installation of the JCOP tools in case you have to clean up your eclipse.
For installation you can extract this jar into a new subdirectory (named "com.ibm.bluez.jcop.eclipse_3.1.1.b") of the eclipse "plugin" directory.
BTW: They are explicitly referring to this forum for "questions and answers for using JCOP".
Perhaps that means some of the formerly JCOP members will participate in this forum? - We will see...
Jan

Can anybody provide details of how JCOP tools can now
be aquired?Obvious answer: contact IBM. There is a link on the old Zurich pages. I know that they still work on JCOP, but I presume they have changed the conditions on acquiring the JCOP tools, since they have matured and have left Zurich. IBM is used to doing this; see Aphaworks. If their products get to a certain stage, they become (part of) a commercial product. I don't think they still provide sample cards etc. Read their page to be sure.

Instructions for Downloading and Activating the JCOP Tools

In response to my question:
I refer to JCOP Tools available on Eclipse.
If the plug-in free for download?
If it is not, kindly provide a proper hyperlink from which those interested can place their order.Listed below is the reply from IBM. Can anyone who has successfully obtained the activation code this way confirm whether you need to foot the postage?
Cheers!!!!
There is no charge for the JCOP Tools. The tools are provided as-is with no warranty or support. Instructions for downloading and activating the tools follow.
Please note that because our Java Card operating system is now available for more than one silicon vendor, IBM will no longer act as a distributor for sample cards. If you require a sample card, you must now approach the silicon vendors directly . Our current silicon partners are Philips Semiconductor, Samsung and Sharp. In addition you may be able to obtain JCOP sample cards from suppliers on this list http://www.zurich.ibm.com/jcop/order/cards.html
JCOP Tools are subject to US Government Export Controls, and therefore each install has to be activated individually to ensure compliance. Please follow the instructions below for each copy of the tools that need to be activated.
Prerequisites:
   1. If you do not already have a Java Runtime Environment (JRE) installed, download and install a JRE or JDK. You can do so from this website (http://java.sun.com/j2se/1.4.2/download.html). Please note that we recommend the use of JRE version 1.4.2.
   2. If you do not already have the open source software development environment Eclipse installed, download and install Eclipse (http://www.eclipse.org/), You can do so from this website(http://www.eclipse.org/downloads/index.php). JCOP Tools require Eclipse 3.1
To download the tools and start install:
   1. Download the current Update Site image from here (http://www.zurich.ibm.com/jcop/download/eclipse/image/tools.zip)
   2. Unzip the downloaded file to a location of your choice
   3. Start the Eclipse IDE
   4. From the menu bar click on Help > Software Updates > Find and Install
   5. In the Install/Update Dialog select Search for new features to install
   6. Click Next
   7. Click on New Archived Site . . . and browse to the location chosen in step 2
   8. Select the file tools.zip
   9. Click Open then OK then Finish
10. Eclipse Update Manager will start to install the plug-in, continue with the install as needed.
For an activation code please send me ([email protected]) the following information:
   1. Your full postal address - the serial number will be sent via International Courier for US Export control reasons.
   2. Your contact telephone number
   3. The serial number of your JCOP tools install
   4. Your planned usage/reason for needing the JCOP tools
   5. If a student, a copy (fax or digital photo) of your student ID
For the serial number (item 3 above):
   1. Ensure you have downloaded and installed the JCOP Tools
   2. Start the Eclipse IDE
   3. From the menu bar click on File > New > Project
   4. In the New Project Dialog expand the Java Card folder
   5. Select Java Card Project
   6. Click Next
   7. You should now see the JCOP Licensing Wizard
   8. Click Next
   9. Select Verify an Activation Code
10. Click Next
11. The Serial Number should appear on the next page, above the Activation Code entry fields.
12. Once you have that number click on Cancel then Abort (Note: the Java Card project choice will be disabled until the next time you restart Eclipse)

For those who are interested to use the JCOP simulator for a start, I have checked that the plug-in and feature files (in tools.zip) for Eclipse are still available at IBM site, please download and install yourself.
I still keep a copy of user guide for JCOP tools (version 3.1.1a) and the contents are still relevant to Version 3.1.1b simulator in tools.zip.
If you are interested to have a copy of such document, kindly drop me an email to [email protected]

GP of jcop eclipse plugin is really GP

Hallo, I was asking myself if the global platform implementation of the JCOP eclipse plugin (3.0) fully conform to the GP specific(or more simply I don't understand anything about GP).
Because I have an Oberthur ID-One Cosmo 64RSA GP2.1.1 compliant smart card, but I can't upload anything by JCOP shell, it stops at loading "import.cap" with 6985(Conditions of use not satisfied)
Any help comes like gold, thanks.
Gas.

The GP in JCOP Tools really is GP! If the LOAD process stops at IMPORT it usually means that the CAP files references something that is not on the card.
As far as I know, the Cosmo 64RSA is a JavaCard 2.2.0 compliant card. JCOP Tools generate JavaCard 2.2.1 CAP files, so the card stops loading at IMPORT, because it sees that javacard.framework 2.2.1 is referenced.
You can create 2.2.0 CAP files with JCOP tools if you get the 2.2.0 Sun kit and put those JAR and EXP files on the build path instead of the ones JCOP ships with.

Using JCOP tools under Linux

Hello.
I looked through the older web sites of IBM regarding the usage of JCOP tools under Linux.
I am interested in following questions:
1. Is there any separate distributon version of JCOP tools for Linux?
2. Can sample JCOP tools 3.1.2 plugin (for Windows) be used under Linux. What has to be modified? Also what additional tools have to be installed an used for communication with real cards through PC/SC readers.
3. Is JCOP simulation option available under Linux?
I'll appreciate any help.
Best regards,
newbie

newbie2007 wrote:Hello.
I looked through the older web sites of IBM regarding the usage of JCOP tools under Linux.
I am interested in following questions:
1. Is there any separate distributon version of JCOP tools for Linux?
2. Can sample JCOP tools 3.1.2 plugin (for Windows) be used under Linux. What has to be modified? Also what additional tools have to be installed an used for communication with real cards through PC/SC readers.
3. Is JCOP simulation option available under Linux?
I'll appreciate any help.
Best regards,
newbieEverything should work, except for the target pack and the non-existent Linux Pegoda driver.1. The is no seperate Linux distribution. You just need a Linux distribution for Eclipse.JCOP Tools plugin should work under Linux, except for the target pack and the non-existent Pegoda driver for Linux.1. There is no seperate Linux distribution. You just need the Linux distribution for Eclipse.
2. Prior to JCOP Tools 3.1.2 the last time something was mentioned about Linux was in the release notes of 3.1.1b . In version 3.2.0 IBM added a linux_support page to the JCOP Tools user guide (see release notes and linux_support page below).
3. There shouldn't be any problems with the generic simulation. The target pack runs only with Windows though.
h1. Release Notes
h2. Version
JCOP Tools 3.1.1.b (Bärlach)
h2. What's new?
h3. 3.1.1.b
<ul><li>New simulation (fixed static obj/arr bug, fixed instance field token bug).</li>
<li>Applet privileges can now be specified in the launch configuration dialog.</li>
<li>The "exportmap" feature is now available.</li>
<li>The JCOP Performance Test Demo ("JCOP Factor") is now included.</li>
<li>Minor bug fixes.</li>
</ul>
h2. Known problems
<ul><li>Simulations do not run (Linux, MacOS X)
     The Eclipse update manager does not set the execute permission bits for the simulations. You need to manually <code>chmod 755</code> those files in ECLIPSE/plugins/com.ibm.bluez.jcop.eclipse_3.1.1.x/simuls/
</li>
<li>PC/SC Support (Linux)
     JCOP Tools only works with pcsc-lite 1.2.0.
</li>
</ul>
h2. Frequently Asked Questions
Please refer to the online FAQ at http://www.zurich.ibm.com/jcop/download/eclipse/faq/.
h2. Bug Reports
Please send bug reports to [email protected]. Make sure you include the following:
<ul><li>Problem description</li>
<li>Steps to reproduce</li>
<li>Eclipse version and build number (Help > About)</li>
<li>JCOP Tools version (Help > About; click on BlueZ icon)</li>
</ul>
h2. Using JCOP Tools with Linux (>= 3.2.0)
h3. ___
Overview
The current JCOP Tools release now also offer a version for the popular Linux
operating system. Both the Windows and Linux verson provide more or less the same
functionality, and JCOP application development can thus fully succeed on Linux systems.
Nevertheless, installation of the JCOP Tools differ between Windows and Linux
where the Linux version does not provide a simple installer as in case of Windows.
Additionally, the Linux version expects a properly setup Muscle PCSC installation
as soon as you want to use them together with physical, real cards. As Muscle
PCSC is still not shipped with most Linux distributions, you must download and
install them separately from the JCOP Tools.
h3. ___
Contents
h3. ___
Software Requirements
Linux distribution
The JCOP Tools simulation has been developed on a Fedora Core 6 system, but should also work in case of
many other recent Linux distributions.
Java Development Kit
The JCOP Tools have been developed and tested with the Sun JDK 1.4.2_13-b06
for Linux. Your success with other Development Kits may vary as there are
partly subtle differences across the different devlopment kits.
PCSC
The JCOP Tools use PCSC to talk with real cards on Linux. Most distributions
do not ship with Linux PCSC by default (Fedora Core 6 does), you must thus download it fromhttp://www.linuxnet.com
and install it by yourself. If you are used to software installation under Linux,
and are not afraid of compiling and installing software packages, this should
not be a hard problem. You have to download both the base PCSC package
(including PCSC daemon and client libraries) and separately the driver
for the reader you want to use. The PCSC package contains a test program
which should tell you whether your installation is set up correctly and
communicating with a card works. The JCOP Tools have been reported to
work together with Muscle PCSC version 1.3.1-7.
JPCSC
The JCOP Tools are shipped with JPCSC which you can also download athttp://www.linuxnet.com. JPCSC
is a JNI library which offers Java applications the access to PC/SC functions
by mapping their requests to an underlying native PC/SC implementation. The JCOP
Tools - mostly written in Java - thus depend on JPCSC to communicate with real cards
on Linux. JPCSC depends on a properly installed and setup PC/SC environment.
Especially, the JAVA_LIBRARY_PATH should list the directories where the
PC/SC client libraries and the native JPCSC library libjpcsc.so ( downloadable as binary from
Windows Binary Download Here )
are installed, the CLASSPATH variable should list th___
Miscellaneous
What should work
As soon as you setup your system correctly, there should only be minor differences
between using JCOP Tools on Windows or on Linux. Emulating a real JCOP,
debugging, shell, cap-file conersion should all be possible as in case of Windows.
What is missing
No drivers or tools are currently available for using JCOP30's in contactless
mode. If you need such support, please contact directly NXP
at for further assistance.
Copyright 2001,2007 IBM Corp. All rights reserved.
Edited by: lexdabear on Sep 28, 2007 4:13 PM (I hate the new edit)

JCOP tools plugin is unable to upload the applet

Similar Messages

Maybe you are looking for