JCV Gy-HD100 camera patch for FCP

I recently talked with JVC rep who informed me of a FCP software patch to be releashed to solve the HDV capture problems with this camera. Has anyone senn or heard of its release by APPLE? This conversation was about two weeks ago.

Whichever type of tape you use stick with that brand. DO NOT alternate back and forth or you will tear up your heads (i.e. Sony vs JVC). Sony tapes use a lubricant on them and unless your camera or deck is made to work with them (which JVC is not) it can clog up your heads faster. Obviously the easiest solution is buy the brand of tape that is made by the manufacturer of your equipment - JVC, Sony, Panasonic, Canon, etc. Since you run JVC make sure its a non-lubricated tape.
Also be careful using the miniDV head cleaner tapes, they are extremely abrasive. Running them once and awhile is fine but it's better to have your heads professionally cleaned than using the miniDV cleaner tapes.
Ryan

Similar Messages

Best format to convert Ultra HD Flip Camera file for FCP editing?

We are using two types of cameras for a video project and one of them is a Flip Camera. Unfortunately, FCP doesn't play too nice with raw flip camera files so I need to convert said file using MPEG Streamclip. What is the best/recommended format to convert the movie file to for FCP editing?
Thanks!

From my experience, Pro Res 422 has been the most recommended for any conversion. Thanks!
Should I look for a specific audio compression option or should I just leave it as "uncompressed"?

* BCC 4.01 Patch for FCP 5.1 only

Boris Continuum Complete 4.01 Update for Final Cut Pro 5.1 users only
is available here:
http://www.borisfx.com/register/download/
This patch addresses the following two problems:
• The FCP Canvas appears black when a BCC filter is applied to a clip.
• FCP may crash if a clip containing a BCC filter is double-clicked in the FCP Timeline when the FCP Playhead is not located on the clip.
G5 1.8 DP (Rev. A) Mac OS X (10.4.6) ATI X800 XT, 4GB RAM, 20" Cinema Display, M-Audio Revolution 5.1

Make sure you read and follow the bizarre instructions in the PDF that comes with the patch, or you will have problems..guaranteed!
8. When the installation is complete, click Quit to exit the installer
9. Launch Final Cut Pro with the Caps Lock key down.
10. Immediately quit Final Cut Pro and launch with the Caps Lock key up.
The software is updated.
and
This software patch includes the following limitations:
• (Caps Lock key Down) When double-clicking a clip with a BCC filter applied, if the Filters tab is open in the FCP Viewer, FCP may crash. Keep the Caps Lock key up to prevent this problem.
• Caps Lock key Up) When double-clicking a clip with a BCC filter applied, if the Filters tab is open in the FCP Viewer, the custom controls will be blank. Quitting FCP and relaunching will resolve this problem.
• If you apply a BCC filter with the Filters tab open, the custom controls will be blank.
To avoid this problem, press the Caps Lock key when applying the filter.
• If the Final Cut Pro Obj Cache file, located in
Application Support > Final Cut Pro User Data, is deleted or cleared, when a BCC filter is added to a clip, its user interface will not appear. To resolve this problem, repeat steps 9 and 10 in the installation instructions.
Caps key down, caps key up...who's going to remember when applying a BCC filter?

Can't download a patch for Camera raw files for Photoshop Elements 9.

Can't open RAW files from a Canon 60D camera on Photoshop Elements 9. Went online and suggested solution is to download a patch for PE9, which has been done. Tried to open program and message says Adobe Application manager download required. This done, and back to opening patch for PE9. Message says AAM failed, please download new version (hey, already been there). Going round in circles again. Does anyone non geek check these things. Please help!!!

Adobe - Adobe Application Manager : For Windows
Adobe - Adobe Application Manager : For Mac
Anything else requires more information on your part. We do not know anything about your operating system nor the exact error message(s).
Mylenium

The new Update with the Patch for Camera Raw is not working. Code U44M1P34

Hi there,
i have a problem with the new CC Update - including the patch for Camera Raw 8.7.1
Error Code: U44M1P34
Photoshop CC (2014)
After Effects CC (2014)
Brisge CC
The logfile shows 1 fatal error:
FATAL: Payload 'Photoshop Camera Raw 8_8.7_AdobeCameraRaw8.0All 8.0.0.22 with a number following.
I have tried to uninstall an reinstall. Did not work at all, because the same Problem is shown.
I did not install in other folders. All other updates worked - but not this update. The problem seems to bee only caused by the Camera Raw Update.
Are there others with the same Problem? Any ideas?
Thanks in advance and Greetings,
Joerg

Hi Jeff,
it seems that i have found a dirty, but working solution for my problem on this site: Getting fatal Exit Code 34 when installing an app
To change these 3 folder names and reinstalling of my Programs worked fine without any errors:
Adobe PCD -> Adobe PCDold
backup -> backupold
caps -> capsold
Now the Programs are on the actual status with all updates included and everythings seems to be fine.

I have cs5 and bought new camera olympus e-m1 photoshop does not open raw files is there a patch for it?

I have cs5 and bought new camera olympus e-m1 photoshop does not open raw files is there a patch for it?

Familiarize yourself with these tables
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Camera Raw-compatible Adobe applications
The E-M1 was first supported by Camera Raw 8.3 which is only compatible with CS6 and CC. It is not compatible with CS5 or lower and never will be.
Some options:
Upgrade to CS6
Join the Cloud
Download the free Adobe DNG converter, convert all the Raw E-M1 files to DNGs then edit the DNGs in CS5
Camera raw, DNG | Adobe Photoshop CC

Please help me configure a new 8core for FCP

PLEASE HELP A PC GUY MOVE OVER...
I need to configure a new 8-core for FCP mainly. I need to keep the expense reasonable so dont want to spend extra $$$ if i dont have to.
I edit files from many different camera's these days. Mostly weddings & demos.
I want to go with an 8 core either Two 2.26GHz, OR 2.66GHz? Is the 2.2 fast enough with FCP?
How much ram do i need?
Do I need to stripe 2 sata drives together for the video?
Which video card?
Can you recommend any other software/hardware that will help me?
Here is a link to apples spec page:
http://www.apple.com/macpro/specs.html
THANKS

sarecco wrote:
PLEASE HELP A PC GUY MOVE OVER...
Welcome to the family. if you are not familiar with the Macintosh operating system, get yourself a book.
sarecco wrote:
I want to go with an 8 core either Two 2.26GHz, OR 2.66GHz? Is the 2.2 fast enough with FCP?
Either will work fine.
sarecco wrote:
How much ram do i need?
As much as you want but 8G will be adequate. More might not help significantly.
sarecco wrote:
Do I need to stripe 2 sata drives together for the video?
Depends on the video you're trying to use or if you want to do 9 camera multiclips. Maybe.
sarecco wrote:
Which video card?
The stock 4870 is the gold standard for Motion; the current rev of FCP does not care much about the GPU but we are hoping future revs will use the card directly.
sarecco wrote:
Can you recommend any other software/hardware that will help me?
Umm, withotu knowing what you need to do, of course not.
sarecco wrote:
THANKS
No sweat, ignore those other guys. We see this post about once a week around here so you can easily research it on the forum. Strongly urge you to locate your local Macintosh user group.
bogiesan

This new 1080p tv sets and my 1080i Sony camera-output from FCP

I use a Sony FX1. My best capture is at 1080i or 720p.
I've recently been recording at a higher shutter speed and am getting improved footage.
I note that FCP has an output option of 1080p - 30. Is this only half as good as the new monitors can show? If I eventually want to create highest quality for playback on 1080p-60 will I need an updated camera and will FCP have to offer 1080p-60?
Since I've never viewed 1080p-60 is the - 30 vs - 60 a big issue?
Using the 1080p-30 makes for a much improved view than H264 720x480 or HDV 1080i any other settings up to this one. H264 is a GREAT file size saver but does not use near the bit rate of 1080p-30.
One other thing. When the new OS comes out with 64-bit processing, is FCP and DVDPro already ready. I have not found any specs on FCP 5.1.4 indicating it is 64-bit ready.

ensure the following are set
View>Video Playback>Firewire Apple 720x480 (NTSC or PAL - whatever is appropriate)
View>Audio Playback>Audio follows video
View>External Video>All Frames
If this isn't what you are set to do, you won't be sending video out to your recorder.
x

A problem with Client Security Solution patch for Mozilla Firefox3

After I updated Client Security Solution to 8.20, the password manager cannot work in FF3 again.When I tried to reinstall the patch, it asked me whether to overwrite the files or cancel. Then it indicates 'This patch has already been installed on this computer', but the problem exsits.

Borntofly, I am glad that you brought this up as I have not been able to successfully use FF3 with CSS 8.1 or 8.2 and have provided feedback in this thread:
http://forums.lenovo.com/lnv/board/message?board.id=Special_Interest_Utilities&thread.id=937&view=by...
As much as I would like to upgrade to FF3, I have not had any success in either using the manual configuration changes noted in the above thread or by using the CSS Patch for FF3 provided by Lenovo on 8/6/08 found here:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70132
This patch appears to duplicate the manual efforts provided by member KTP in message 12 in the above provided link from what I can see.
I have never had an issue using the TV password manager and IE7. It is a very reliable combination.
I have no issues at all using FF 2.0.0.16, CSS 8.1 or 8.2 (now on 8.2), and Thinkvantage (TV) Password Manager 3.00.0106.00 (came with CSS 8.2). I have never had Lenovo Password Manager on my T60. Everything works reliably well with this combination.
In 3 hours of work yesterday, I was able to get TV Password Manager to show up in the FF3 add-ons as TV Password Manager 3.01 and this is the only way I was able to make it work, but only for a single browser session:
1. Tools --> Add-Ons
2. Disable TV Password Manager, then restart FF3
3. Tools --> Add-Ons
4. Enable TV Password Manager, then restart FF3
5. TV Password Manager will work for the duration that I am using the browser session
Once I close FF3 and reopen it, TV Password Manager no longer works. The only method I have found to "reset" everything is to perform the above sequence, but again it only works for the single browser session. It is very consistent. Although in does not show this in the Add-Ons page, it almost appears that the TV Password Manager add-on is disabled after I close the browser and needs to be manually disabled then enabled as noted above. If this is due to a conflict with other software on my laptop, I have not been able to determine this.
In my efforts yesterday, I spent time uninstalling CSS 8.1 or 8.2, FF, and even removed registry entries related to these packages in order to start with a fresh install, all without any success. I tried fresh installations and added the manual changes promoted by KTP and also tried fresh installations using the Lenovo patches, all without success. I made attempts to troubleshoot to root cause by removing all add-ons except TV Password Manager, and also tried preventing certain software from installing at startup via msconfig, as well as multiple settings changes within FF3, all to no avail. Again FF 2.0.0.16 continues to work very well with little effort on my part. I simply install the software and ensure that TV Password Manager 2.0 in installed in the add-ons and that's it.
In the above FF3 thread, it appears that others have had success with KTP's changes so I am a little frustrated that I cannot make FF3 and TV Password Manager work reliably. I have FF2 and IE7 working so I have plenty of good alternatives at this time. I will post this at the FF3 above as well to see if anyone has any feedback.
Moderator(s), do you wish for this thread to be integrated in the original thread for this issue?
T60, 8744-5BU: 2.0 GHz T7200, 4 GB RAM, 15.4" WSXGA+, 1680x1050 ATI Mobility Radeon X1400, Win 7 Ultimate w/SP1 - 64-bit

IMac vs Powermac for FCP

I am debating between an iMac and PowerMac for FCP editing. I am primarily a shooter but would like to offer editing to clients as well. Don't anticipate anything to graphics or effects intensive. For fairly simple editing does the PowerMac have a huge ($1500) advantage over the top of the line iMac?

iMac:
DV, HDV, DVCPRO HD (possibly) and maybe AVCHD only. Those are the ONLY formats you can edit. I say possibly with DVCPRO HD because the ONLY drives you can use on an iMac are firewire drives. Those are fine for DVCPRO HD (Firewire 800 required), but only for working with P2 DVCPRO HD...nothing from tape. You only have one firewire bus, so capturing using that bus for the camera, AND for the drive is sketchy. Will work most of the time, but not all of the time. Forget Uncompressed SD or HD...not gonna work. The ONLY thing you can upgrade is the RAM...that's it. So Motion will work fine, but not optimally with the graphics card already in place.
Mac Pro: great expandibility
YOu can install different graphics cards, install capture cards for working with uncompressed HD and SD...and can install eSATA cards for working with faster drives. It comes with 4 internal drive slots, three empty, so that you can install fast drives internally that will work with uncompressed SD and DVCPRO HD and ProRes (ProRes on the iMac will be iffy).
Mac Pro is a professional machine, and iMac is a consumer machine. If you work with DV and HDV only, and only need firewire drives, it should be fine. But that's about all you can do with it.
Shane

Problems with the canon xf plugin for fcp 7 Can't log and transfer mxf files.

Hi
I can't log & transfer mxf files from a c300 camera in FCP 7 even though I installed the xf plugin.
When I looked at canon's website this link comes up but it doesn't work.
http://usa.canon.com/nw3s/CanonUSA/DownloadContents/English/0200206002EN.htm
Any suggestions?
Or other plugins that might work?
Thanks,
James

Hello jameskendi,
The most obvious reason we can tell as to why this may not work properly is the version of FCP you are using. You mention using FCP 7, although the plugin is specifically for FCP X. This is why you're having such difficulty. If possible, we'd recommend using an updated computer and or software to process these files.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Best screen capture resolution for FCP

I'm making some tutorials of various computer software.
I'm going to edit them with FCP.
I'm using the MAC built in SHIFT-COMMAND - 3 or 4
in order to snap stills off my screen, and then
import into Final Cut Pro to edit the tutorials with.
The stills, once in the timeline, look pretty fuzzy and
unuseable.
What have others used in terms of resolution, format and such in order to end up with captures off your screen that you'll bring into FCP that end up looking good if you're
going to end up going to video or DVD?
I also have SNAP PRO X to work with, but I still haven't
found the right format or resolution to get around this problem.
Any input would be appreciated.
Thanks.

Without going into DPI (which is really meaningless in FCP land...as has been argued again and again and again...although if you MUST apply a value just stick in 72, but really it has no effect) the pixel dimensions of stills to import for FCP FULL FRAME are 720x534. Because stills have square pixels and FCP uses rectangular ones. If you want to do any movement on the stills, just increase the dimensions PROPORTIONALLY. 2x would be 1440 x 1064.
Oh, and as for the blurry issue:
#2 Playback is blurry
Shane's Stock Answer #2:
ONLY JUDGE THE QUALITY OF YOUR MATERIAL ON AN EXTERNAL NTSC MONITOR, OR AT LEAST A TV.
1. Disable overlays on the canvas
2. Make sure you've rendered everything (no green bars at the top of the timeline
http://docs.info.apple.com/article.html?artnum=24787
DV footage requires large amounts of data and many computations. In order to maintain frame rate and be viewable at a normal size, only about one-fourth of the DV data is used in displaying the movie to the screen. However, the DV footage is still at full quality, and is best viewed thru a TV or NTSC monitor routed thru your camera or deck.
For this, and other exciting stock answers visit www.proapptips.com

Any Specific patches for General Ledger on Release 12.1.3

All -
I came to know we can migrate oracle apps *12.1.1 to 12.1.3* by implementing update pack - (*Patch 9239090*)
But are there any specific patches for General Ledger Module on release *12.1.3*
Please advise on this
Regards
VSH

I came to know we can migrate oracle apps *12.1.1 to 12.1.3* by implementing update pack - (*Patch 9239090*)
But are there any specific patches for General Ledger Module on release *12.1.3*
Please advise on thisPlease see the docs under the "2. Recommended Patching" section in (EBS R12 Period Close Advisor: General Ledger [ID 1359476.1]).
Also, please the docs referenced in these docs.
Planning Your Oracle E-Business Suite Upgrade from Release 11i to Release 12.1 [ID 987516.1]
E-Business Suite: Oracle Financial Control Information Center [ID 1207527.1] -- GENERAL LEDGER
Oracle Applications Current Patchset Comparison Utility - patchsets.sh [ID 139684.1]
My Oracle Support > Patches & Updates > Recommended/Latest R12 Patches
Thanks,
Hussein

Where/how to obtain camera profiles for Adobe Camera Raw 7.3?

Where can you get camera profiles for ACR? And how do you load them into ACR? Is the Sony A77 on that list? Need help on this one. Thanks.

Adobe Standard is the only camera profile available for your camera, then, if that’s all you see.
Adobe only makes the so-called “camera-match” profiles, with names like Camera Standard, Camera Portrait, Camera Faithful, etc, for Canon and Nikon and a select few others. I suspect there is a lot of work involved in these and they don’t do it for cameras they see as less popular or less used.
They wouldn’t be the same as the Camera-Match profiles from Adobe but you can create your own proilfes with an X-Rite 24-patch ColorChecker Classic and the Adobe DNG Profile Editor or using the X-Rite ColorChecker Passport package:
http://xritephoto.com/ph_product_overview.aspx?ID=1257

When is Apple gonna release a patch for iTunes to sync apps?

I already bought the apps the day it first came out and i can't even sync the january software upgrade to my ipod touch. i'm not about to re-sync my ipod and lose all my music just for 5 little apps. i refuse to do that. i wanna know when apple is gonna release a patch for itunes (7.6.1) so i can sync the upgrade file to my ipod touch without having to lose my music collection?
if the patch doesn't come out by the end of the month, i'm gonna ask for my money back.

well, the thing is, some of my mp3's aren't on my computer since i probably deleted them off my hard drive at one point or if i was using another computer to add my music. i have an ipod video that has the same exact collection as my ipod touch, but i like to have my playlists a certain way and i don't want to start organizing it the way i like it again. its such a pain.
i just want apple to at least say something about a patch. they're always quiet about everything, even something as simple as updates.

JCV Gy-HD100 camera patch for FCP

Similar Messages

Maybe you are looking for