JDBC 1.2 for SQL 2008

Hi Gurus,
I searched in SAP Marketplace and saw that the JDBC adapter 1.2 posted there is for SQL 2005 server only. May I know where I can download a JDBC 1.2 adapter for the 2008 SQL server? I'm working with XI 7.0.
Thanks all.
Regards,
SAPenthusiast

Hello,
Check these notes:
Note 639702 - JDBC Driver for Microsoft SQL Server
Note 1600699 - Microsoft jdbc driver 1.2 support
I think you can just use the JDBC 1.2 that appears for download in SQL Server 2005. Check http://msdn.microsoft.com/en-us/sqlserver/aa937724 for example. The same driver is used to connect different DB versions.
Cheers,
Diego.

Similar Messages

Issue With Report Builder After Installing SP3 for SQL 2008 R2

Hello. We are experiencing an issue with Report Builder 3.0 since installing SP3 for SQL 2008 R2 over the weekend. You can no longer launch Report Builder from the Reporting Services URL (http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application
      Server  : Microsoft-HTTPAPI/2.0
      X-AspNet-Version: 2.0.50727
Application url   :
http://dicomweb/ReportServer/ReportBuilder/RptBuilder_3/MSReportBuilder.exe.manifest
      Server  : Microsoft-HTTPAPI/2.0
      X-AspNet-Version: 2.0.50727
IDENTITIES
Deployment Identity  : ReportBuilder_3_0_0_0.application, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86
Application Identity  : MSReportBuilder.exe, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86, type=win32
APPLICATION SUMMARY
* Online only application.
* Trust url parameter is set.
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of
http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application resulted in exception. Following failure messages were detected:
  + File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [10/15/2014 9:35:56 AM] : Activation of
http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application has started.
* [10/15/2014 9:36:29 AM] : Processing of deployment manifest has successfully completed.
* [10/15/2014 9:36:29 AM] : Installation of the application has started.
* [10/15/2014 9:36:31 AM] : Processing of application manifest has successfully completed.
* [10/15/2014 9:36:35 AM] : Found compatible runtime version 2.0.50727.
* [10/15/2014 9:36:35 AM] : Detecting dependent assembly Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=msil using Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a,
processorArchitecture=msil.
* [10/15/2014 9:36:35 AM] : Detecting dependent assembly System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=msil using System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089,
processorArchitecture=msil.
* [10/15/2014 9:36:35 AM] : Request of trust and detection of platform is complete.
ERROR DETAILS
Following errors were detected during this operation.
* [10/15/2014 9:36:43 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
  - File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
  - Source: System.Deployment
  - Stack trace:
   at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
   at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
   at System.Deployment.Application.ComponentVerifier.VerifyComponents()
   at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification
notification, DownloadOptions options)
   at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
   at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
   at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
   at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.

Hi DMcGarveyt,
This is an known issue in SSRS 2008 R2 SP3. For this issue, Microsoft has published an article addressing this issue. It is not planning to release a fix for this defect. But there's workarounds for this issue. Please refer to the link below:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Where is the management Studio for SQL 2008 Express?

Can anyone point me to where I can download the management studio for SQL 2008 Express.
I've downloaded and installed SQL 2008 Express without problem but can't find the management studio.
Help.

Paradox1 said:
The 2008 version of the Management Studio is not a stand alone installation and can only be installed as part of the SQL Server 2008 Express with Tools or Advanced installation.
Like many others, I spent countless hours trying to figure out how to install the Management Studio for SQL Server 2008 Express - Advanced installation (same should apply to the w/ Tools version). What happened in my case was that I installed Visual Studio 2008 Express and during that process a stripped down "Instance" of SQL Server 2008 was installed that did not include the Management Studio. Through much pain and torture I learned that the Management Studio can only be installed during installation of the first instance. To delete that first instance, you must go to "Add or Remove Programs" and remove "Microsoft SQL Server 2008". The removal process will only remove one instance at a time and if you have installed more than one instance you need to keep going until all instances have been removed and the application completely disappears from the Add or Remove Programs" dialog. Note: You do not need to uninstall any of the other SQL Server 2008 applications that also appear in the "Add or Remove Programs" dialog. Then go back through the install process as follows: Double click on SQLEXPRADV_x86_ENU.exe to load the SQL Server Installation Center and then go to Installation > New SQL Server stand-alone installation. Then proceed through all of the installation steps until you get to “Feature Selection” and click on “Select All” to toggle on all of the Shared Features, which should include Management Tools - Basic.Continue the process from there and you should be good to go. Hopefully this will help others to avoid much of the pain that many of us have already experienced.

SQL 2014 license for SQL 2008

Hi,
I'm purchasing SQL 2014 license.
Can I use the SQL 2014 license for SQL 2008 or 2012.
Thanks,
Sathish
Sathish

Hi Sathish,
For more detailed information regarding to the license issue, please call 1-800-426-9400, Monday through Friday, 6:00 A.M. to 6:00 P.M. (Pacific Time) to speak directly to a Microsoft licensing specialist. For international customers, please use the
Guide to Worldwide Microsoft Licensing Sites to find contact information in your locations.
Regards,
Elvis Long
TechNet Community Support

Security patch MS11-049 needed for sql 2008 R2 SP2

My Database engine version is:
SQL
Server 2008 R2(SP2)
- 10.50.4260.0(X64)
Jul 11 2012 15:47:13
Copyright(c)
Microsoft Corporation Enterprise Edition(64-bit)
on
Windows NT 6.1
<X64>(Build
7601:
Service Pack 1)(Hypervisor)
According to KB2494086 this security patch is applicable for SQL Server 2008 R2 RTM. Does this vulnerability addressed in SQL 2008 R2 Service Pack 2?
Thanks,
TRouf

Hello,
That update was already part of SP1 and it is part of SP2 too.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

TFS 2010 Support for SQL 2008 R2 SP3

Does TFS 2010 support SP3 on SQL 2008 R2?
Based on this link only SP2 is supported.
http://msdn.microsoft.com/en-us/library/vstudio/dd631889%28v=vs.110%29.aspx
Thanks

Hi Aravind100,
Thanks for your post.
As far as I know SQL Server 2008 R2 SP3 support TFS 2010. I think that document has not been updated after SQL Server 2008 R2 SP3 released.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Any known issues with SCOM 2007 R2 after upgrading to SP2 for SQL 2008 R2 ?

Are there any known or reported issues in SCOM 2007 R2 after installing SP2 for SQL server 2008 R2 ? Currently running RTM version of SQL Server 2008 R2.

Hi There,
As a testing purpose long time back i did this. I did this step by step
I installed SCOM 2007R2 with SQL server 2008 with SP1 initially.
Then upgraded to 2008 SP2.
Then upgraded to 2008 SP3
Then upgraded to 2008 R2.
Then upgraded to 2008 R2 SP1
Finally to SP2
I dint find any issue.
I just kept on adding service packs upon each other. Except for upgradation to 2008 to 2008 r2 i used the installation media then the SP1 & SP2 files. to upgrade to service packs.
If you want to go to directly SP2 i would suggest you install SP1 and then install SP2.
Every thing is fine in the LAB equipment i tried this.
Gautam.75801

Silent Install for SQL 2008 admin tools, to be pushed out via SCCM 2012

Hi I would like to know if you have any information on Silent App installs for MS SOL fetchers only? I really need to know what MSI to use in my Application and any switched i can incorporate for deployment though SCCM 2012.
Thanks,
Manny

Hi,
do you want to install SQL 2008 admin tools? and what tools do you want to install? and what is your application? And do you want to deploy the installation script via SSCM? Please be more clear.

Change installation directory for SQL 2008 SP3 or CU

My C drive is full, Server built long time ago. Not enough space available in C Drive but other local drive have storage.
Is there anywhere i can use my other drive for patching or apply CU.
Env: win 2003 ,SQL 2008 SP1

My C drive is full, Server built long time ago. Not enough space available in C Drive but other local drive have storage.
Is there anywhere i can use my other drive for patching or apply CU.
Env: win 2003 ,SQL 2008 SP1
Hi,
Why dont you move SQL server user data file and log file from C drive to other drives this will create space. It would require a SQL Server restart
Refer this link
http://msdn.microsoft.com/en-GB/library/ms189133%28v=sql.100%29.aspx
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

B1TCH (DIC tools ) for SQL 2008 and SAP b1 8,81

Hi
In the past , I used B1TCH tools for updating fileds in jurnal entry with SQL 2005 and also B1 2007 verion.
but now I cannot use it with SQL 2008
is there any comment?
Thanks

Try: Get Your Kicks with DI Commander

How do I install SQL Management Objects for SQL 2008 on a 2 node cluster?

Hi,
One of the software we use needs the SMO to be installed. This is on a SQL 2008 2 node cluster. In the control-panel, I do NOT see this installed, and I see the client tools SDK installed and I even did a repair of it. I still do not see it.
Can some one please help me with SMO install on this 2 node SQL 2008 cluster? I could not find a working link to install this.
Thanks!
Suresh.
Suresh Channamraju

Hi Suresh,
According to your descriptIon, you need to install SMO on two nodes of SQL 2008 cluster, right?
If you want to develop an application that uses SQL Server Management Objects (SMO), you should select the Client Tools SDK when you install SQL Server. To install the Client TooLs SDK without installing SQL Server, install Shared Management Objects from
the SQL Server 2008 Feature Pack.
http://www.microsoft.com/en-us/download/details.aspx?id=6375
By default, the SMO assemblies are installed in the C:\Program Files\Microsoft SQL Server\100\SDK\Assemblies\ directory.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Is there a list of Event IDs for SQL 2008 auditing events?

As a SQL Server newbie, I am having trouble finding Event IDs for SQL that can be monitored in Change Auditor.

Did you click the event class on the description column
EventClass
int
Type of event = 107.
--Prashanth

SQL 2000 ODBC CONNECTION STRING FOR SQL 2008

i have vb 6 application. Database is SQL server 2000.
my connection string is (using odbc driver),
        .ConnectionString = "Driver={SQL Server};SERVER=" & mServer & ";DATABASE=mydb;UID=" & mLogin.Username & ";pwd=" & mLogin.Password & ";"
Now i have tried this application with SQL server express 2008 R2
Can i still keep the old connection string? will there be any problem in future?
(if i have to change then have to change at so many places.....)
I can run application without any problem for now (not changed connection string to new one)
otherwise i have to use ODBC or OLEDB which are,
        .ConnectionString = "Driver={SQL Server Native Client 10.0};SERVER=" & mServer & ";DATABASE=mydb;UID=" & mLogin.Username & ";pwd=" & mLogin.Password & ";"
or
        .ConnectionString = "Provider=SQLNCLI10;SERVER=" & mServer & ";DATABASE=mydb;UID=" & mLogin.Username & ";pwd=" & mLogin.Password & ";"
if i have to change to new connection string Which one is better to use odbc or oledb.
h2007

personally I favor ODBC as it is easy to use sometime. Additionally you can check the link below:
http://social.msdn.microsoft.com/Forums/en/sqlintegrationservices/thread/19e0c306-0be4-46b5-b207-0937931d63a7
cheers!!!
Vatsa
www.objectiveprogramming.com

Cant seem to load Reporting services for SQL 2008 R2

I want to add the reporting services to my existing SQL installation. I have the install CD and choose the option to "Install new instance or add additional features" and then go through the checks and loads the setup files and everything
is fine. Then I get to the part where you select which instance you want to update and it only shows the SQLExpress in the pulldown menu. When I click "next" the window goes away and never comes back. What I am I doing wrong?

Hello,
Let’s run the Discovery Report to know how many instances and how many components each have installed.
http://blogs.msdn.com/b/petersad/archive/2009/11/13/sql-server-2008-discovery-report.aspx
Share the result of that report with us.
If you have only a express instance, you will have to install Reporting Services as a new instance.
Regards,
Alberto Morillo
SQLCoffee.com

BPC 7.5 SP4 Support for Windows 2008 R2 and SQL 2008 R2

The release notes for BPC 7.5M SP04 state that support has been added for both Windows 2008 R2 and SQL 2008 R2.
For SQL 2008 R2, there is nothing in the feature pack described as "SQL 2005 Backward Compatibility Components" - which was a required piece for BPC 7/7.5 on SQL 2008. Is the SQL 2008 version still a requirement, or does BPC 7.5 now not need the Backward Compatibility components?
Also, the ReprotViewer executable that is packaged with BPC 7.5 is the one for SQL 2008- will that work when installing SQL 2008 R2?
thanks,
Tony DeStefanis
Column5 Consulting

Hi,
we have the same environment (BPC 7.5 SP4 on Windows 2008 R2 64 bit and SQL Server 2008 R2 64bit).
we are developping our application-set and for the moment we have no problem.
regards
massimo

JDBC 1.2 for SQL 2008

Similar Messages

Maybe you are looking for