JDBC Adapter / Acknowledgements

Hello all
My scenario is the following :
IDOC > XI > Oracle database.
I want to update a table.
As I use UPDATE_INSERT actions on database, I think there can't be errors if database is reached by adapter.
So I decided to use an asynchronous interface.
Is it right ?
Actions are done succefully but an alert is sent because of acknowledgements.
I have the following error :
OUTBINDING.CO_TXT_ROUTING_BACK_ERROR
How can I avoid this error. I can't find in JDBC adapater a parameters that enables / disables acknowledgements....
Why my acknowledgement is in error ?
Thanks a lot.
J.C.

hi,
do you use a BPM with a send step for JDBC call?
if so check the send step properties
ack is included in one of them
"You have the following options:
·        No acknowledgement (default)
·        Transport Acknowledgement
·        Application Acknowledgement
from:
http://help.sap.com/saphelp_sem60/helpdata/en/86/80163f6b5baa09e10000000a114084/content.htm
Regards,
michal
XI / PI FAQ - Frequently Asked Questions

Similar Messages

  • How to get rid of system acknowledgements in JDBC adapter

    Hi,
    I've set up a receiver JDBC adapter.
    It works good, but sends back acknowledgements which i dont want
    On help.sap.com i found:  "....If you want to prevent a synchronous system acknowledgement from being sent back, even if the sender requests it, set XI.AckFinal=false....."
    In the channel configuration i'm on tab "parameters" >> tab "advanced" and i checked the box "advanced".
    I get "additional parameters" screen
    There is a box where i can fill name and value for parameters.
    If i put:
    name = XI.AckFinal
    value = false,
    i still get the acknowledgements from the database.
    What must i do to get rid of the acknowledgements?
    Thx.
    Robert

    Hi Srinivas,
    I think you are referring to the tab "module"
    What i am referring to is the tab "parameters" , etc etc.
    I dont think i would need an additional module to get rid of the system acknowledgements.
    Thx.

  • Do we have any Acknowledgement concept At receiver side of JDBC Adapter

    Helo,
    Do we have any Acknowledgement concept At receiver side of JDBC Adapter?
    Thanks,
    Soorya

    Hi venkat,
    For receiver JDBC adapter message can be sent synchronously and asynchronously.
    In case of SELECT  statement only synchronous makes sense..since the JDBC adapter will select some rows/columns and return it.
    In case of other statements (UPDATE,INSERT,DELETE) if the message is sent synchornously.. u will get only the no of rows affected..so these can be treated as acknowledgement...
    Regards
    Biplab
    **Reward points if it helps u**

  • Pass system ack of JDBC adapter to ERP in IDoc - XI - JDBC scenario

    Dear all,
    i have an IDoc -> XI -> JDBC scenario (without using ccBPM). In the standard way the ERP system, sending the IDoc waits for an application acknowledgement. However the JDBC adapter is only capeable to send system acknowledgements.
    Is there a way to pass these acknowledgements to the IDoc status record?
    In help.sap.com (http://help.sap.com/saphelp_nwpi71/helpdata/en/ab/bdb13b00ae793be10000000a11402f/frameset.htm) under "IDoc Processing with the IDoc Adapter " there is a table that maps XI system/applic acknowledgement to IDoc status. So in my opinion the status record of my IDoc should at least chenge to the corresponding status for the system ack.
    Can anyone tell, if this is really working? What if I deactivate the acknowledgement request in the NOALE programm?
    In any case, can I achieve to transfer the system ack to the IDoc status without using a ccBPM?
    Many thanks and best regards
    Florian

    Is there a way to pass these acknowledgements to the IDoc status record?
    Without BPM, No.
    So in my opinion the status record of my IDoc should at least chenge to the corresponding status for the system ack.
    The ack referred here is related to idoc status whether it is properly reached till XI or not and not related to the JDBC ack.
    What if I deactivate the acknowledgement request in the NOALE programm?
    Then u won't have any ALEAUD message at sender R3.
    In any case, can I achieve to transfer the system ack to the IDoc status without using a ccBPM?
    No
    Regards,
    Prateek

  • BPM - JDBC adapter - How to trigger system errors thro' adapters?

    I have designed the BPM in following way :
    1. Receive step - Receive Asynchronous message
    2. Defined the Block - DB
    3. Send step 'A' to JDBC - inside the Block-'DB' - Acknowledgement-Transport, Exceptions System Error-'DB', Receiver from-Send context.
    4. Created an exception handler and Selected 'DB' as exception handler for the property of the exception handler branch.
    5. Inserted the Send step-'B' to Mail inside the exception handler branch by using the mail receiver adapter.
    We want send the message to update database by using JDBC adapter but if it fails to update database then we want send an e-mail to outlook.
    Due to some problem we are not able to receive confirmation for the update of database in the "SEND" step-'A' and it is not red flag error it means it is not system error in Tcode-SXMB_MONI. Does anyone can help me to get a system error triggered by the JDBC adapter which would basically throws up the red flag and tells XI that the message could not be delivered successfully to database and the message would route to "SEND" step-'B' to send an email to outlook?
    Thanks in advance!
    Mrudula

    Hi Sarvana,
    I have defined the all the mandatory fields in the BPM.
    Following is the error log if you could help me in resolving it.
    Thanks in advance!
    MESSAGE ID: com.sap.aii.ib.sbeans.oa.rb_all.RUNTIME_EXCEPTION_OCCURED
    com.sap.aii.utilxi.swing.framework.FrameworkException: Runtime error (RuntimeException). See details
         at com.sap.aii.ib.gui.editor.XiDocument.checkConsistency(XiDocument.java:780)
         at com.sap.aii.ibrep.gui.bpm.BusinessProcessDocument.checkConsistency(BusinessProcessDocument.java:479)
         at com.sap.aii.ib.gui.editor.XiDocument.checkObject(XiDocument.java:799)
         at com.sap.aii.ib.gui.editor.CheckObjectCommand.execute(CheckObjectCommand.java:38)
         at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
         at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
         at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
         at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
         at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
         at javax.swing.AbstractButton.doClick(Unknown Source)
         at javax.swing.AbstractButton.doClick(Unknown Source)
         at com.sap.plaf.frog.FrogMenuItemUI$ClickAction.actionPerformed(FrogMenuItemUI.java:960)
         at javax.swing.SwingUtilities.notifyAction(Unknown Source)
         at javax.swing.JComponent.processKeyBinding(Unknown Source)
         at javax.swing.JMenuBar.processBindingForKeyStrokeRecursive(Unknown Source)
         at javax.swing.JMenuBar.processBindingForKeyStrokeRecursive(Unknown Source)
         at javax.swing.JMenuBar.processBindingForKeyStrokeRecursive(Unknown Source)
         at javax.swing.JMenuBar.processKeyBinding(Unknown Source)
         at javax.swing.KeyboardManager.fireBinding(Unknown Source)
         at javax.swing.KeyboardManager.fireKeyboardAction(Unknown Source)
         at javax.swing.JComponent.processKeyBindingsForAllComponents(Unknown Source)
         at javax.swing.JComponent.processKeyBindings(Unknown Source)
         at javax.swing.JComponent.processKeyEvent(Unknown Source)
         at java.awt.Component.processEvent(Unknown Source)
         at java.awt.Container.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.KeyboardFocusManager.redispatchEvent(Unknown Source)
         at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(Unknown Source)
         at com.sap.aii.utilxi.swing.toolkit.AccessibleKeyboardFocusManager.dispatchKeyEvent(Unknown Source)
         at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(Unknown Source)
         at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(Unknown Source)
         at java.awt.DefaultKeyboardFocusManager.dispatchEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Window.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)

  • JDBC adapter trace logs

    We turned on the trace in visual administration tool for JDBC adapter thro' VA>Service>Log configuration>>locations>>com>>sap>>aii>>adapter>>JDBC.
    Where should I look in visual adminitration tool for the trace log for JDBC adapter?
    We are using Acknowledgment=Transport in Asynchonous "SEND" step of BPM to receive acknowlegement of updating database.
    It is updating database but in Tcode-SXMB_MONI, Ack Status = ? "still waiting acknowledgement"
    Can someone please help me to figure out where should I look for JDBC logs and why we are not able to receive acknowlegement?
    Thanks in advance!
    Mrudula

    Hi,
    - log on to the Visual Administrator
    - start service - Log Viewer
    - cluster -> server -> logs
    - choose defaultTrace.trc
    did you set tracing level to debug for JDBC adapter..
    Cheers,
    Naveen

  • JDBC Adapter - Established database connection failed

    Hi Guys,
    we have installed the JDBC Adapter based on the How To Guide and we checked after the installation the  Libaries :Cluster --> Server --> Libraries --> com.sap.aii.af.jmsproviderlib and the box Box "JARs Contained" was filled.
    So in my point of view we have done everything right during the installation.
    Now the developer tested theJDBC Adapter and he comes back with following Error:
    Attempt to establish database connection failed with SQL error com.sap.aii.adapter.jdbc.sql.DriverManagementException: Cannot establish connection to URL "jdbc:microsoft:sqlserver://xxx.x.xx.xxx:1433; databaseName=CZZ03;":ClassNot FoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver
    Do you have any ideas?
    Regards
    Markus

    Hello Markus,
    To install JDBC driver follow the how to guide.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
    Configuration of JDBC Adapter for SQL Server
    JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
    Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
    UserID and Password.
    If the connection is not working find the correct port number.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
    JDBC- X I -  R/3 Scenario
    /people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
    /people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
    Thanks,
    Satya Kumar
    Reward Points If it is Useful..

  • CLOB Datatype with JDBC Adapter

    Hi,
    we try to fill a Clob Datatype to JDBC Database.
    We try 2 ways with the JDBC Adapter:
    action="SQL_DML" with an SQL Statment and $placeholders$
    But how can i say the key element that it is a CLOB type?
    He used this a VARCHAR and there a not more than 4k Chars allowed.
    second way is action="EXECUTE" to call a Stored Procedure, but there we got the error that CLOB type is an Unsupported feature.
    Any Idea?
    Regards,
    Robin
    Message was edited by: Robin Schroeder

    Ok i will check this...
    But i'm right when i say that the only way to fill CLOB Type is to use a Stored Procedure ?
    or is there any possibility to do this with action="SQL_DML" ?
    Regards,
    Robin

  • Reg: How to Stop Polling of JDBC Adapter without Scheduling the adapter

    Dear Gurus,
    Here I am having one requirement. My clients wants to send data from JDBC adapter (ORcale System table) to R3 system via RFC.
    His Requirement::
    1. He is not telling the time of data flow from Oracle server so that based on that we can schedule the adapter in the Communication Channel monitoring (Availablitiy Time Planning) or Else we can Schedule by deciding the setting of the polling interval time.
    2. He is telling that When ever he waants to send the data he will place one dummy file in the File Adapter FTP location so that it will became an Indication for u to poll the jdbc adapter and to transfer the data to R3.
    3. Untill he keeps the file or gives indication he doesn;t want to communicate with Oracle server due to some security and it s a most important data base he doesn't want to disturb that Oracle Server as so many business are running  on that.....
    We Proposed::
    1. Atleast you need to tell the scheduling time or poll interval time so that we can schedule our adapter.
    but he s not accepting for this
    2. Atleast U need to give access for Data base to enter one more extra field like STATUS CODE so that we will add one number and we keep on Update in the Update table and based on that Update table statement it will poll.
    but he s not even accepting for this
    3. Finally we prposed that to create another table in the Oracle SYstem as Dulplicate Table which is similar to Standard Orginal table when ever he wants to pick the data please keep that data in this Duplicate TABle so that JDBC adapter will pick the data from thsi TABLE instead of picking the data from that standard table so that it will not effect any standard table data in the table.
    but he s not even accepting for this
    We have done some R & D:::
    1. WE approached even through BPM and via switch conditions is one scenario
       FILE RECEIVE >SWITCH CONDITION> RECEIVE AND SEND or else EXIT
    2. Using correlation in anotehr scenario means correlating File adapter and JDBC and based on one dynamica value it will goes to SEND STEP ( RECE IVE --> RECEIVE --> SEND STEPS )
    Even though we know this...concept that...we jsut tried::
    In BPM we can control the flow in XI 3.0 but we cannot Stop the Polling of JDBC adapter at backend because one the data comes from FILE adapter it will keep on HOLD untill it receives the JDBC from Oracle then based on the condition or Correlation it will goes futher SEND step means after that file adapter is picking file or not ...what ever it may be JDBC will polls at backend and brings that data to BPM"
    Hence sugest me How to Stop Polling of JDBC Adapter without Scheduling the adapter or else using STATUS CODE Update statements in JDBC Tables 
    Regards:
    Amar Srinivas Eli

    Hi! All,
    Finally I decided to do the scenario in two steps:
    1: FILE REQ --> JDBC REQ -->JDBC RES --> FILE RECV
    2: FILE RECV --> RFC
    But I am getting issue while doing first scenario
    Desgn :
    I have created 2 Synchronous interfaces :
    1) FILE 2 JDBC REQ
    In this a) out put message is FILE  Req
              b) Input msage:; FILE RES
    2} JDBC2FILE RECV
            a) Output mesage;; JDBC REQ
            b) Input Msge :: JDBC Response
    Mappings:
    1) File REQ-->JDBC REQ
    2) JDBC RES-->FILE RES
    Interface mappings:
    1: FILE 2 JDBC REQ--> JDBC 2 FLE RECV
    CONFIGURATION ::
    1: One Seder File CC
    2: Two reciever CC's one is for JDBC RECEIVER and other s FILE RECEIVER
    3; One Sender Agreement
    4: 2 Recver agreements
    5: One Interface Determination and
    6: One RECCV Determination
    My Question;;
    1. First let confirm whether my development steps are right or not ?
    2: Another thing s I am not sure reg Configuration Steps means
    whetehr one interface determination and one Receiver Determinations are required or not as these are synchronous Interfaces
    3: main Issue is::::
    If my scenario s FILE2RFC2FILE then I will get RFC response automatically but here issue is this is JDBC
    My reqquirement is By sending one Field from fILE to JDBC REQ it needs to send entire TAbLE records as a Response to file as XML
    without having Sender JDBC how can I send the JDBC Res to FILE and If that is the case then again JDBC adapter is polling which is contradict to the client requuirement which i explained above.
    pleas suggest me the Detailed steps mainly Colloboration agreements and logical routings and
    also explain in detail if i can  go for BPM
    Also give cleear blogs but before giving make sure that it contains detailed screen shots because aIready gone thorugh
    Scenario File-JDBC-RFC
    File<-->JDBC Sync coomunication.
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file-rfc-file(Without+BPM)
    /people/luis.melgar/blog/2008/05/13/synchronous-soap-to-jdbc--end-to-end-walkthrough
    Regards::
    Amar Srinivas Eli

  • How to insert a NULL value in SQL using JDBC Adapter

    Hi All,
    I have a File -> JDBC scenario.
    In the File and in the SQL table  I have a column called "MR_DATE" that needs to be mapped
    I have to do the following:
    If MR_DATE is NOT equal to "00000000"
             then pass MR_DATE to SQL table
    else
              set the MR_DATE column in the table as NULL.
    Please suggest
    regards,
    Piyush

    Hi Piyush,
    In the receiver JDBC adapter select the option Interpretation of Empty String Values as NULL.
    Pass date as empty, it will be interpreted as NULL by adapter and inserted in database.
    Regards,
    Gautam Purohit

  • Error while executing the stored procedure through sender JDBC adapter

    Hi All,
    I am getting below error while executing the stored procedure through sender JDBC adapter.
    Database-level error reported by JDBC driver while executing statement 'exec SapgetNextEntity 'SalesOrder''. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.'. For details, contact your database server vendor.
    what is the problem? any idea to anyone...
    regards
    Ramesh

    hi Dharamveer,
    I am not getting below statement for your reply
    Try to use Refrence Cursor it will return u reference of resultset.
    I mention SP like this
    exec SapgetNextEntity 'SalesOrder'
    SapgetNextEntity -
    > SP Name
    SalesOrder----
    > Parameter I am passing...
    regards
    Ramesh

  • Error while retrieving data from sql using jdbc adapter

    hi all,
    i m working on one scenario where i m sending data using HTTP and receiver is jdbc adapter which is retrieving me data from sql server.
    i have checked the structure both for req and res.
    i m getting this error
    <SAP:Error>
    <SAP:Category>Application</SAP:Category>
    <SAP:Code>MAPPING.EXCEPTION_DURING_EXECUTE</SAP:Code>
    <SAP:P1>com/sap/xi/tf/_INF57285_DB_HR_RES_</SAP:P1>
    <SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
    <SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
    <SAP:Stack>During the application mapping com/sap/xi/tf/_INF57285_DB_HR_RES_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
    </SAP:Error>
    can somebody help me with this.
    Thanks & Regards
    Aruna

    thnks bhavesh i think i made it that way
    JDBC REQ  
      <ns:INF57285_DB_Request xmlns:ns="http://www.infosys.com/xi/training/hyd/57285">
      <Employee>
        <EmpDetails action="SELECT">
          <table>EmpDetails</table>
          <access>
            <Name />
            <EmpId />
            <Band />
            <Salary />
          </access>
          <Key>
            <EmpId>57285</EmpId>
          </Key>
        </EmpDetails>
      </Employee>
    </ns:INF57285_DB_Request>                        
      JDBC RES
    <ns:INF57285_DB_Request_response xmlns:ns="http://www.infosys.com/xi/training/hyd/57285">
      <Employee_response>
        <row>
          <Name>aruna</Name>
          <EmpId>57285</EmpId>
          <Band>A</Band>
          <Salary>4675776</Salary>
        </row>
      </Employee_response>
    </ns:INF57285_DB_Request_response>
    my hr req is which i mapped with DB req
    <ns:INF57285_HR_Req xmlns:ns="http://www.infosys.com/xi/training/hyd/57285">
      <REQUEST>
        <EmpNo>57285</EmpNo>
      </REQUEST>
    </ns:INF57285_HR_Req>
    my hr res is which i mapped with DB res
    <ns:INF57285_HR_Res xmlns:ns="http://www.infosys.com/xi/training/hyd/57285">
      <response>
        <row>
          <Name>aruna</Name>
          <Empld>57285</Empld>
          <Salary>4675776</Salary>
        </row>
      </response>
    </ns:INF57285_HR_Res>
    and interestingly i am not getting any error in sxmb_moni
    it's not showing any error
    plz suggest me something wht to do ....
    thnks & regards
    Aruna

  • Need to connect to Oracle 11g using PI 7.1 JDBC adapter

    Hi All,
    I am trying to configure a JDBC adapter to connect Oracle 11g. For this I need to know the driver,jar and connection URL details.
    Can anyone please provide the above information?
    Please correct me if my details are wrong :
    JDBC Driver : oracle.jdbc.driver.OracleDriver
    JAR : ojdbc5.jar
    URL : jdbc:oracle:thin:@localhost:1521:ora11i
    Regards,
    Prakash.

    Yes i knew how to deploy the jars using SDA.
    I will try to deploy the above jar (ojdbc5.jar ) and try to connect to Oracle 11g with URL & Driver classname.
    If I face any problem then i will get  back to you.

  • How to call Packaged Stored Procedure in JDBC Adapter?

    hello frnds,
    I m working on a SAP R/3 -> XI -> Oracle scenario. Here on receiver side i m using JDBC Adapter in which i m using a stored procedure.
    I have my stored procedure in a Package. Example : package "PKG_SPARES_VOR_UPLOAD" and in that stored procedure "pr_spares_vor_po_hdr_upload".
    i have checked that if i write this stored procedure outside the package then it works fine... but if i put it into the package then it is giving me error that ....
    " Receiver Adapter v2112 for Party '', Service 'BS_ORADEV':
    Configured at 2006-08-16 10:12:14 GMT+05:30
    History:
    - 2006-08-16 11:02:04 GMT+05:30: Error: TransformException error in xml processor class: Error processing request in sax parser: Error when executing statement for table/stored proc. 'PR_SPARES_VOR_PO_HDR_UPLOAD' (structure 'statement'): java.sql.SQLException: ORA-06550: line 1, column 7:
    PLS-00201: identifier 'PR_SPARES_VOR_PO_HDR_UPLOAD' must be declared
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored ".
    please help me out with this problem.
    Thankx,
    Regards,
    Audumbar

    Hi,
    I have the same problem to call a stored Procedure in a Package.
    If my procedure is not in a package, everything is right.
    And I musn't indicate all the name, because I musn't put '.' in the name (of the procedure), in my DT on XI.
    It would be so nice to have an answer.
    Rémi

  • Table name in Receiver JDBC Adapter

    Hi All,
    I am using receiver JDBC adapter.
    But table name consist of " like BPC."#II" .
    After mapping table name becomes BPC.&quot;#II&quot; .
    I am getting error while pulling data from DB.
    Is the table name creating a problem.
    Please remedy of this if you have come across such scenario.
    Regards
    Piyush

    Hi Piyush,
    All that i could get from the SAP Help regarding JDBC Adapters are these links where i never found anything much regarding the table name.anyways just go through these links and see if you find anything useful.
    http://help.sap.com/bp_bpmv130/Documentation/Planning/XIUnicodeGuide030411.pdf
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/b0/676b3c255b1475e10000000a114084/content.htm">Configuring the Receiver JDBC Adapter</a>
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/cf/406642ea59c753e10000000a1550b0/content.htm">Mapping Lookups</a>
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/22/b4d13b633f7748b4d34f3191529946/content.htm">JDBC Adapter</a>
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm">Configuring the Receiver JDBC Adapter - part 2</a>
    This is all i got from the help files, anyways you can also go through those links and see if you find anything else useful.
    - Escape Symbol for Apostrophe
    The apostrophe character (‘) is a reserved character in SQL syntax and is therefore replaced by an escape character if it occurs within value strings. This replacement character can be database-specific. Typical replacement characters are \’ or ’’(default value). If a character occurs that is invalid for the database being used, the adapter triggers an error message (an SQL exception) concerning the SQL syntax that is generated by the database.
    - Column Name Delimiter
    Depending on the database being used, column names can be enclosed by a special delimiter character, for example, if the names can contain special characters (such as ”). This character can be specified at this point. The default setting is no delimiter character. If a character occurs that i
    Also check if there are notes in the service market place related to the same.
    Regards,
    abhy
    Message was edited by: Abhy Thomas

Maybe you are looking for

  • I bought QT Pro - Where the %&*# is the reg code?

    Last night I purchased QT Pro online. 5-10 mins or so later i received an email confirming my order. The email references my reg code but I don't see it anywhere. I called Apple support and talked to about 6 different people. They helped me go throug

  • Writing Academy Leader

    Hello, all. I'm getting ready to score my feature in Logic. I want to have a QT video with the movie's first frame (beginning titles and music) timecode at 01:00:00:00. This will only be a video export. No audio, as I am planning on OMFing my audio i

  • LSMW Fails when run in B/G but works fine in Front end..why?

    Hi All, i am trying to run a batch process by LSMW, my files are accurate, no problem with them, everything works fine but it fails when run in BG..works absolutely fine in front end. whats the diff with running in B/G? same thing happens when i am t

  • BSEG table value can't apply formula

    I download amount column for BSEG into excel, for example, in excel, the document number 400000235 has amount 51.866,60, when I apply formula column X=1.5*amount column, it shows #value!, if I change to 51866.6, it works fine, I have more than 2000 l

  • FB03 Long text to sapscript

    Hi   My requirement is ,i have to read the long text entered in the FB03 transaction(it may be several lines) in my Z Print program and pass that to the sapscript form that it gets displayed as line item. can you please send sample how to do in progr