JDBC adapter MessageExpiredException

Hi there,
I am using JDBC adapter in a integration process. After a call is made to the database, it is coming back with the following error:
com.sap.aii.af.ra.ms.api.MessageExpiredException: Message aa3cb50e-4e57-eb4e-9d79-0f4a9759a6b4(INBOUND).
This error does not occur every time but only occurs i.e. once in 10 times.
What could be the reason for it and what required to prevent it.
1. Is it that the database to where the call is made is real slow and not fine tuned or
2. Do I need to change any timeout parameter in XI for JDBC adapter.
Please advise.
Regards,
Faiq

Hi Faiq -
There is a timeout property that determines how long the XI messaging system waits for synchronous responses. Once the timeout is reached, a MessageExpiredException can occur.
This property name is xiadapter.inbound.timeout.default within the SAP XI Adapter: XI J2EE service (access from J2EE visual admin tool).
See Note 791379 for more details.
Regards,
Jin

Similar Messages

Pass system ack of JDBC adapter to ERP in IDoc - XI - JDBC scenario

Dear all,
i have an IDoc -> XI -> JDBC scenario (without using ccBPM). In the standard way the ERP system, sending the IDoc waits for an application acknowledgement. However the JDBC adapter is only capeable to send system acknowledgements.
Is there a way to pass these acknowledgements to the IDoc status record?
In help.sap.com (http://help.sap.com/saphelp_nwpi71/helpdata/en/ab/bdb13b00ae793be10000000a11402f/frameset.htm) under "IDoc Processing with the IDoc Adapter " there is a table that maps XI system/applic acknowledgement to IDoc status. So in my opinion the status record of my IDoc should at least chenge to the corresponding status for the system ack.
Can anyone tell, if this is really working? What if I deactivate the acknowledgement request in the NOALE programm?
In any case, can I achieve to transfer the system ack to the IDoc status without using a ccBPM?
Many thanks and best regards
Florian

Is there a way to pass these acknowledgements to the IDoc status record?
Without BPM, No.
So in my opinion the status record of my IDoc should at least chenge to the corresponding status for the system ack.
The ack referred here is related to idoc status whether it is properly reached till XI or not and not related to the JDBC ack.
What if I deactivate the acknowledgement request in the NOALE programm?
Then u won't have any ALEAUD message at sender R3.
In any case, can I achieve to transfer the system ack to the IDoc status without using a ccBPM?
No
Regards,
Prateek

JDBC Adapter - Established database connection failed

Hi Guys,
we have installed the JDBC Adapter based on the How To Guide and we checked after the installation the Libaries :Cluster --> Server --> Libraries --> com.sap.aii.af.jmsproviderlib and the box Box "JARs Contained" was filled.
So in my point of view we have done everything right during the installation.
Now the developer tested theJDBC Adapter and he comes back with following Error:
Attempt to establish database connection failed with SQL error com.sap.aii.adapter.jdbc.sql.DriverManagementException: Cannot establish connection to URL "jdbc:microsoft:sqlserver://xxx.x.xx.xxx:1433; databaseName=CZZ03;":ClassNot FoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver
Do you have any ideas?
Regards
Markus

Hello Markus,
To install JDBC driver follow the how to guide.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
Configuration of JDBC Adapter for SQL Server
JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
UserID and Password.
If the connection is not working find the correct port number.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Thanks,
Satya Kumar
Reward Points If it is Useful..

CLOB Datatype with JDBC Adapter

Hi,
we try to fill a Clob Datatype to JDBC Database.
We try 2 ways with the JDBC Adapter:
action="SQL_DML" with an SQL Statment and $placeholders$
But how can i say the key element that it is a CLOB type?
He used this a VARCHAR and there a not more than 4k Chars allowed.
second way is action="EXECUTE" to call a Stored Procedure, but there we got the error that CLOB type is an Unsupported feature.
Any Idea?
Regards,
Robin
Message was edited by: Robin Schroeder

Ok i will check this...
But i'm right when i say that the only way to fill CLOB Type is to use a Stored Procedure ?
or is there any possibility to do this with action="SQL_DML" ?
Regards,
Robin

Reg: How to Stop Polling of JDBC Adapter without Scheduling the adapter

Dear Gurus,
Here I am having one requirement. My clients wants to send data from JDBC adapter (ORcale System table) to R3 system via RFC.
His Requirement::
1. He is not telling the time of data flow from Oracle server so that based on that we can schedule the adapter in the Communication Channel monitoring (Availablitiy Time Planning) or Else we can Schedule by deciding the setting of the polling interval time.
2. He is telling that When ever he waants to send the data he will place one dummy file in the File Adapter FTP location so that it will became an Indication for u to poll the jdbc adapter and to transfer the data to R3.
3. Untill he keeps the file or gives indication he doesn;t want to communicate with Oracle server due to some security and it s a most important data base he doesn't want to disturb that Oracle Server as so many business are running on that.....
We Proposed::
1. Atleast you need to tell the scheduling time or poll interval time so that we can schedule our adapter.
but he s not accepting for this
2. Atleast U need to give access for Data base to enter one more extra field like STATUS CODE so that we will add one number and we keep on Update in the Update table and based on that Update table statement it will poll.
but he s not even accepting for this
3. Finally we prposed that to create another table in the Oracle SYstem as Dulplicate Table which is similar to Standard Orginal table when ever he wants to pick the data please keep that data in this Duplicate TABle so that JDBC adapter will pick the data from thsi TABLE instead of picking the data from that standard table so that it will not effect any standard table data in the table.
but he s not even accepting for this
We have done some R & D:::
1. WE approached even through BPM and via switch conditions is one scenario
 FILE RECEIVE >SWITCH CONDITION> RECEIVE AND SEND or else EXIT
2. Using correlation in anotehr scenario means correlating File adapter and JDBC and based on one dynamica value it will goes to SEND STEP ( RECE IVE --> RECEIVE --> SEND STEPS )
Even though we know this...concept that...we jsut tried::
In BPM we can control the flow in XI 3.0 but we cannot Stop the Polling of JDBC adapter at backend because one the data comes from FILE adapter it will keep on HOLD untill it receives the JDBC from Oracle then based on the condition or Correlation it will goes futher SEND step means after that file adapter is picking file or not ...what ever it may be JDBC will polls at backend and brings that data to BPM"
Hence sugest me How to Stop Polling of JDBC Adapter without Scheduling the adapter or else using STATUS CODE Update statements in JDBC Tables
Regards:
Amar Srinivas Eli

Hi! All,
Finally I decided to do the scenario in two steps:
1: FILE REQ --> JDBC REQ -->JDBC RES --> FILE RECV
2: FILE RECV --> RFC
But I am getting issue while doing first scenario
Desgn :
I have created 2 Synchronous interfaces :
1) FILE 2 JDBC REQ
In this a) out put message is FILE Req
 b) Input msage:; FILE RES
2} JDBC2FILE RECV
 a) Output mesage;; JDBC REQ
 b) Input Msge :: JDBC Response
Mappings:
1) File REQ-->JDBC REQ
2) JDBC RES-->FILE RES
Interface mappings:
1: FILE 2 JDBC REQ--> JDBC 2 FLE RECV
CONFIGURATION ::
1: One Seder File CC
2: Two reciever CC's one is for JDBC RECEIVER and other s FILE RECEIVER
3; One Sender Agreement
4: 2 Recver agreements
5: One Interface Determination and
6: One RECCV Determination
My Question;;
1. First let confirm whether my development steps are right or not ?
2: Another thing s I am not sure reg Configuration Steps means
whetehr one interface determination and one Receiver Determinations are required or not as these are synchronous Interfaces
3: main Issue is::::
If my scenario s FILE2RFC2FILE then I will get RFC response automatically but here issue is this is JDBC
My reqquirement is By sending one Field from fILE to JDBC REQ it needs to send entire TAbLE records as a Response to file as XML
without having Sender JDBC how can I send the JDBC Res to FILE and If that is the case then again JDBC adapter is polling which is contradict to the client requuirement which i explained above.
pleas suggest me the Detailed steps mainly Colloboration agreements and logical routings and
also explain in detail if i can go for BPM
Also give cleear blogs but before giving make sure that it contains detailed screen shots because aIready gone thorugh
Scenario File-JDBC-RFC
File<-->JDBC Sync coomunication.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file-rfc-file(Without+BPM)
/people/luis.melgar/blog/2008/05/13/synchronous-soap-to-jdbc--end-to-end-walkthrough
Regards::
Amar Srinivas Eli

How to insert a NULL value in SQL using JDBC Adapter

Hi All,
I have a File -> JDBC scenario.
In the File and in the SQL table I have a column called "MR_DATE" that needs to be mapped
I have to do the following:
If MR_DATE is NOT equal to "00000000"
then pass MR_DATE to SQL table
else
set the MR_DATE column in the table as NULL.
Please suggest
regards,
Piyush

Hi Piyush,
In the receiver JDBC adapter select the option Interpretation of Empty String Values as NULL.
Pass date as empty, it will be interpreted as NULL by adapter and inserted in database.
Regards,
Gautam Purohit

Error while executing the stored procedure through sender JDBC adapter

Hi All,
I am getting below error while executing the stored procedure through sender JDBC adapter.
Database-level error reported by JDBC driver while executing statement 'exec SapgetNextEntity 'SalesOrder''. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.'. For details, contact your database server vendor.
what is the problem? any idea to anyone...
regards
Ramesh

hi Dharamveer,
I am not getting below statement for your reply
Try to use Refrence Cursor it will return u reference of resultset.
I mention SP like this
exec SapgetNextEntity 'SalesOrder'
SapgetNextEntity -
> SP Name
SalesOrder----
> Parameter I am passing...
regards
Ramesh

Error while retrieving data from sql using jdbc adapter

hi all,
i m working on one scenario where i m sending data using HTTP and receiver is jdbc adapter which is retrieving me data from sql server.
i have checked the structure both for req and res.
i m getting this error
<SAP:Error>
<SAP:Category>Application</SAP:Category>
<SAP:Code>MAPPING.EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_INF57285_DB_HR_RES_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:Stack>During the application mapping com/sap/xi/tf/_INF57285_DB_HR_RES_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
</SAP:Error>
can somebody help me with this.
Thanks & Regards
Aruna

thnks bhavesh i think i made it that way
JDBC REQ
<ns:INF57285_DB_Request xmlns:ns="http://www.infosys.com/xi/training/hyd/57285">
<Employee>
 <EmpDetails action="SELECT">
 <table>EmpDetails</table>
 <access>
 <Name />
 <EmpId />
 <Band />
 <Salary />
 </access>
 <Key>
 <EmpId>57285</EmpId>
 </Key>
 </EmpDetails>
</Employee>
</ns:INF57285_DB_Request>
JDBC RES
<ns:INF57285_DB_Request_response xmlns:ns="http://www.infosys.com/xi/training/hyd/57285">
<Employee_response>
 <row>
 <Name>aruna</Name>
 <EmpId>57285</EmpId>
 <Band>A</Band>
 <Salary>4675776</Salary>
 </row>
</Employee_response>
</ns:INF57285_DB_Request_response>
my hr req is which i mapped with DB req
<ns:INF57285_HR_Req xmlns:ns="http://www.infosys.com/xi/training/hyd/57285">
<REQUEST>
 <EmpNo>57285</EmpNo>
</REQUEST>
</ns:INF57285_HR_Req>
my hr res is which i mapped with DB res
<ns:INF57285_HR_Res xmlns:ns="http://www.infosys.com/xi/training/hyd/57285">
<response>
 <row>
 <Name>aruna</Name>
 <Empld>57285</Empld>
 <Salary>4675776</Salary>
 </row>
</response>
</ns:INF57285_HR_Res>
and interestingly i am not getting any error in sxmb_moni
it's not showing any error
plz suggest me something wht to do ....
thnks & regards
Aruna

Need to connect to Oracle 11g using PI 7.1 JDBC adapter

Hi All,
I am trying to configure a JDBC adapter to connect Oracle 11g. For this I need to know the driver,jar and connection URL details.
Can anyone please provide the above information?
Please correct me if my details are wrong :
JDBC Driver : oracle.jdbc.driver.OracleDriver
JAR : ojdbc5.jar
URL : jdbc:oracle:thin:@localhost:1521:ora11i
Regards,
Prakash.

Yes i knew how to deploy the jars using SDA.
I will try to deploy the above jar (ojdbc5.jar ) and try to connect to Oracle 11g with URL & Driver classname.
If I face any problem then i will get back to you.

How to call Packaged Stored Procedure in JDBC Adapter?

hello frnds,
I m working on a SAP R/3 -> XI -> Oracle scenario. Here on receiver side i m using JDBC Adapter in which i m using a stored procedure.
I have my stored procedure in a Package. Example : package "PKG_SPARES_VOR_UPLOAD" and in that stored procedure "pr_spares_vor_po_hdr_upload".
i have checked that if i write this stored procedure outside the package then it works fine... but if i put it into the package then it is giving me error that ....
" Receiver Adapter v2112 for Party '', Service 'BS_ORADEV':
Configured at 2006-08-16 10:12:14 GMT+05:30
History:
- 2006-08-16 11:02:04 GMT+05:30: Error: TransformException error in xml processor class: Error processing request in sax parser: Error when executing statement for table/stored proc. 'PR_SPARES_VOR_PO_HDR_UPLOAD' (structure 'statement'): java.sql.SQLException: ORA-06550: line 1, column 7:
PLS-00201: identifier 'PR_SPARES_VOR_PO_HDR_UPLOAD' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored ".
please help me out with this problem.
Thankx,
Regards,
Audumbar

Hi,
I have the same problem to call a stored Procedure in a Package.
If my procedure is not in a package, everything is right.
And I musn't indicate all the name, because I musn't put '.' in the name (of the procedure), in my DT on XI.
It would be so nice to have an answer.
Rémi

Table name in Receiver JDBC Adapter

Hi All,
I am using receiver JDBC adapter.
But table name consist of " like BPC."#II" .
After mapping table name becomes BPC."#II" .
I am getting error while pulling data from DB.
Is the table name creating a problem.
Please remedy of this if you have come across such scenario.
Regards
Piyush

Hi Piyush,
All that i could get from the SAP Help regarding JDBC Adapters are these links where i never found anything much regarding the table name.anyways just go through these links and see if you find anything useful.
http://help.sap.com/bp_bpmv130/Documentation/Planning/XIUnicodeGuide030411.pdf
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/b0/676b3c255b1475e10000000a114084/content.htm">Configuring the Receiver JDBC Adapter</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/cf/406642ea59c753e10000000a1550b0/content.htm">Mapping Lookups</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/22/b4d13b633f7748b4d34f3191529946/content.htm">JDBC Adapter</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm">Configuring the Receiver JDBC Adapter - part 2</a>
This is all i got from the help files, anyways you can also go through those links and see if you find anything else useful.
- Escape Symbol for Apostrophe
The apostrophe character () is a reserved character in SQL syntax and is therefore replaced by an escape character if it occurs within value strings. This replacement character can be database-specific. Typical replacement characters are \ or (default value). If a character occurs that is invalid for the database being used, the adapter triggers an error message (an SQL exception) concerning the SQL syntax that is generated by the database.
- Column Name Delimiter
Depending on the database being used, column names can be enclosed by a special delimiter character, for example, if the names can contain special characters (such as ). This character can be specified at this point. The default setting is no delimiter character. If a character occurs that i
Also check if there are notes in the service market place related to the same.
Regards,
abhy
Message was edited by: Abhy Thomas

Calling a Stored Procedure with JDBC Adapter ?

I'm trying to call a Stored Procedure in my XI 3.0 JDBC adapter, but I get an "...invalid number of parameters...." error.
Does anyone have an example of a Query SQL Statement and the corresponding Stored procedure?
This is my test code. Eventually I would like to return a resultsett from the stored procedure.
Query SQL Statement:
call Sp_sapxi( 'F1' , 'xx' )
Stored Procedure:
CREATE OR REPLACE PROCEDURE Sp_sapxi (
transtype_in IN      xi_flaggtest.TRANSTYPE%TYPE,
status_in    IN      xi_flaggtest.STATUS%TYPE)
IS
BEGIN
UPDATE xi_flaggtest
           SET status = status_in
           WHERE transtype = transtype_in;
END;
Regards,
Elling

you can clear the field key tags mandatory in the XML Schema interpreter parameter and make the Empty string value to Empty string from null value.
For mapping : you can pass a value that is of the same format of date; but you can take your own value in the database since you are parsing the date format from one to other
thanks
nikhil

Sapdb (maxdb) and jdbc adapter problem

Hi,
i have installed this jdbc file:
http://sapdb.org/7.4/sap_db_jdbc.htm
like in this how-to:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how to install and configure external drivers for jdbc and jms adapters.pdf
then i set up an jdbc to file szenario to test the adapter.
Driver is: com.sap.dbtech.jdbc.DriverSapDB
connection is: jdbc:sapdb://sapdb-host/XI_DATA
with sapdb-host is the db server and XI_DATA ist the database
user and pw is dba
sql statement is: SELECT * FROM "AAA_XI_DATA" WHERE "number" = 50
with AAA_XI_DATA is the table with test data.
the statment works in the sapdb studio. (No ; in sapdb and the XI)
but when i have a look at the runtime monitor at the af
messages there is no message genereated. where can i
check, if the jdbc driver is working and where do i find
error messages?
Regards
J.
Message was edited by: Jörg Pieper

You can check if there is some kind of error with the JDBC Adapter in the Runtime Workbench. Inside the RWB, open "Component Monitoring", "tree view", "Adapter Monitoring", and in the adapter listing you'll find the "JDBC Adapter". It should have a green light. If not, the error will be displayed.

Data transfer from SQLDB to SAP R/3 without JDBC adapter

Hi Experts,
Please suggest the possible methods of transferring data from SQLDB to SAP R/3 without using a JDBC adapter at sender side.
Regards,
Kalyan

Hi KKC242 ,
Please suggest the possible methods of transferring data from SQLDB to SAP R/3 without using a JDBC adapter at sender side.
> Data links can work..but not recommended..and that too will be with out using PI.
any way we hav eto connect to the database...even without adapter..by using a OLEDB/JDBC connector...in VB.. an dsend it across to PI
Regards ,

JDBC Adapter-XML Document Name

I am working on XI 2.0 and need to change the XML document name I am receiving from an inbound JDBC adapter. The document I am receiving is:
<resultset>
<row>
 <col1>ABC</col1>
 <col2>123</col2>
</row>
</resultset>
I want to receive:
<MyDocumentName>
<row>
 <col1>ABC</col1>
 <col2>123</col2>
</row>
</MyDocumentName>
Does anyone know how to override the default "resultset" name from the JDBC adapter??? The reason I need to do this is because my message mapping does not work properly unless I have the Message type of the message from my JDBC adapter as "resultset".
Thanks for your help!
Dan Pettingill

(Note: I work with Dan Pettingill, the starter of this thread)
I decompiled the class Renato suggested, but I don't
think that's going to be the solution. The DB2XMBProcesser is dependent on XI properly setting the properties values for the jdbc adapter. DB2XMBProcesser will use a property named "db.documentname" to set the name of the root node of the DB2 results. If no such property is defined, the default value of resultSet is used.
[documentName = getParaWithDefault("db.documentName", "resultset");]
Our problem seems to be that XI is not passing along the parameters we define in the adapter configuration. We've tried numerous combinations and names, but they never take.
The only way we can get XI to recognize that we are sending in a documentName parm is to call it "docName". Any other name is essentially ignored (including db.documentname, documentname, XMB.docName, and a lot of other permutations as well).
But here is the log from that adapter when we do so. Not that it sees the value we're setting, but it won't set the documentname parm going to the jdbc.
2004-08-31 17:33:45 : jdbcListener
Raw configuration data ***
Transport protocol: JDBC, version
Message protocol: JDBC, version
pollInterval|301
additionalParameters|true
jdbcDriver|com.ibm.db2.jcc.DB2Driver
retryInterval|null
dbpassword|***
queryStatement|SELECT * FROM RBPRDB.T1256;
queueName|null
autoCommit|false
updateStatement|Delete from RBPRDB.T1256 Where GUID Is Not Null;
dbdisconnect|false
dbuser|r50445
adapterStatus|active
isolationLevel|2
addParameterParams|*** TABLE , 2 ROWS DEFINED ***
addParameterParams|addParameterParams$0$addParameterParamName$docNamespace
addParameterParams|addParameterParams$0$addParameterParamValue$urn:freescale.com
/xi/db2-ims/wms
addParameterParams|addParameterParams$1$addParameterParamName$docName
addParameterParams|addParameterParams$1$addParameterParamValue$SelectAckQueue
pollIntervalMsecs|null
execute|null
connectionURL|jdbc:db2://WACCTSO.sps.mot.com:9003/WACCDB2T
qualityOfService|EO
Used configuration data ***
'MessageProtocol': 'JDBC'
'adapterStatus': 'active'
'addParameterParams.dbEncoding': ''
'addParameterParams.docName': 'SelectAckQueue'
'addParameterParams.docNamespace': 'urn:freescale.com/xi/db2-ims/wms'
'addParameterParams.docNamespaceScope': 'root'
'additionalParameters': 'true'
'autoCommit': 'false'
'connectionURL': 'jdbc:db2://WACCTSO.sps.mot.com:9003/WACCDB2T'
'dbdisconnect': 'false'
'dbencoding': ''
'dbpassword': '***'
'dbuser': 'r50445'
'documentname': 'resultset'
'documentnamespace': ''
'execute': ''
'isolationLevel': '2'
'jdbcDriver': 'com.ibm.db2.jcc.DB2Driver'
'pollInterval': '301'
'pollIntervalMsecs': '0'
'qualityOfService': 'EO'
'queryStatement': 'SELECT * FROM RBPRDB.T1256;'
'retryInterval': '301'
'updateStatement': 'Delete from RBPRDB.T1256 Where GUID Is Not Null;'
OK - initialized

JDBC adapter MessageExpiredException

Similar Messages

Maybe you are looking for