Jdbc drive for oracle7.3.4 is not working for me

I try have download the JDBC Driver for Oracle7.3 which is 'jdbc73402-nt.zip'. When I run my testing program, I got this error message 'Exception in thread "main" LinkError: no oci804jdbc in java.library.path'.
I have compared the contents of the two classesXXX.zip files with 'jdbc80406-nt.zip'. There is no diffence between classes102.zip. The creation dates of the files are differnt between the tow classes111.zip. However the number of files and and size of each file in the two classes111.zip files are all the some.
I have also download the JDBC drive for oracle 8.0.5 for my othere pc. I can run my testing program without any problem.
Could you tell me why the jdbc73402 is looking for oci804jdbc not oci73jdbc?
Thank you very much for your help.

Let's get your iPhone back up and running reeset12! My first recommendation is to try a soft reset by holding down the power and home keys. If the device doesn't respond, I recommend connecting it to a computer via the usb cable. If you are unable to get past the logo screen in either case, I recommend a hands on evaluation at a store location.
http://bit.ly/3SdsA
Sincerely,
JonathanK_VZW
VZW Support
Follow Us on Twitter@VZWSupport

Similar Messages

USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ?, USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ?

USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ? Anyone can help me plz?

Hi, is this a question" Post?
or are you just offering an insight into your Mouse Issue?
Generally and at times we all have little idiosyncrasies appearing with the running of our Macs.
I use the same Logitech BT with my MBP. MB & iBook..(not at the same time) Only ever had one issue
and the cure was to completely Delete the mouse from BT -> Repair Permissions & Reboot then Re Install the BT mouse..Ihave just put a new set of batteries in the Logitech (only 2nd set ever)...L

LSMW For Converting Open Sales Orders (not working for more than 1 item)

Hi,
I am using following standard object for Open sales orders .
Object               0090   Sales documents
Method               0000
Program Name         RVINVB10
Program Type         D   Direct Input
Its not working for more than 1 line item.
For more than 1 line item its giving Error saying that
'102122                         V1                   845
Print parameter SAPML2 1 is not defined
Can anybody help me out in this regard.
Thanks in advance.
Nitin.

hello, friend.
i will still research the subject. but the first thing that comes into my mind is t-code VA05. with this, you have the option to change the Plant en masse. so a possible workaround is for you to list a number of sales orders using VA05. you then sort the line items by Plant. choose all items with the same plant, change the plant via mass change... then change back to the original plant. hopefully, the new settings should apply.
do test a few sales orders by doing this for a larger scope.
regards.

When I click "remember my user name" for web pages, it does not work for web pages - I have to login after every restart (eg Hotmail)

On websites I visit daily – newspapers, Hotmail, etc, even though I have clicked "remember me on this computer", it does not work. I have to log in every time I have restarted my computer (Mac OSX 10.5.8). Also, this may be related. I have iGoogle as my home page, but "themes", location, widgets, etc are not saved when I shut down.

* Such details are stored in a cookie.
* You need an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep that cookie, especially for secure websites and if you let cookies expire when Firefox closes
* Make sure that you do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
Clearing "Site Preferences" clears all cookies, images, pop-up windows, software installation, and password exceptions.
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
"Remove the Cookies" from sites causing problems: Firefox > Preferences > Privacy > Cookies: "Show Cookies"
If clearing the cookies doesn't help then it is possible that the file cookies.sqlite that stores the cookies is corrupted.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete cookies.sqlite-journal and cookies.txt, if they exist, in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case the file cookies.sqlite got corrupted.
* http://kb.mozillazine.org/Cookies#Removing_cookies

ITunes 10.6.3 for Win7 64 bit does not work for iPad apps

I have downloaded and installed iTunes 10.6.3 64 bit for Window 7 four times - and re-installed 3 times. When it asks if I would like to repair, I way yes. This does not correct the problem. I have an iPad 2 w/ 3G and Wi-Fi.
My problem is that while the iTunes on my Windows PC (running Windows 7 Professional, w/Service Pack 1 - 64-bit) will start, and will show my iPad when the iPad is connected, when I click on the iPad listing, and then on the Apps tab - this feature is basically unusable. This screen shows the basic Home Screen - with all icons dimmed, and then smaller versions along the right side of the basic home screen and my 2 others I've created.
1. All of the home screens shown - and all icons - are dimmed.
2. There is no list of apps along the left side.
3. Clicking on any of the home screens or on any of the icons does nothing.
Therefore I'm not able to choose any apps to sync from the iPad to the PC - nor am I able to re-position any of the apps from one screen to another.
4. Clicking on the Sync Apps button on top left - says "All existing apps and their data on the iPad will be replaced with apps from this (the PC's) iTunes Library. In other words, the only thing I can do is sync from my PC to the iPad - thereby wiping out any new apps on the iPad.
5. Clicking on the Sync button in the lower left does nothing.
So basically, there is no syncing from my iPad to the PC -- period.
HELP!!!
(Oh - also when I connect my iPad, it says there is an update to the 5.1 operating system and would I like to update, but when I say Yes, it warns that I have purchased software on the iPad that has not yet been transferred to iTunes and I should do that first. But of course, since I can't sync, I can't do that first.)

I've also got a similar problem. I upgraded yesterday & today I find (mainly with previously purchased tracks) that iTunes only playes about 51sec of a track. The whole track plays when using "Quicktime" but this doesn't help me when I'm trying to put together a playlist.
Can anyone out the help?

Apache plugin support for WLS 6.1 is not working for me.

Following are the additional configurations I used in httpd.conf after doing LoadModule
& AddModule
Alias /weblogic "/opt/BEA/wlserver6.1/config/petstore/applications"
<Location /weblogic>
SetHandler weblogic-handler
</Location>
<IfModule mod_weblogic.c>
WebLogicHost localhost
WebLogicPort 7003
</IfModule>
I get Permission denied & not even 403/forbidden for Petstore example jsps. I
am trying
to proxy it by URL basis not on mime type. I tried doing same thing for one of
my own domains
& server. The results were same. Now, If I try to comment out the Alias line from
my httpd.conf
file, it gives me 404 error. Can anyone help me out in this regard? I doubt my
configurations
in my weblogic's config.xml file.
Thanks,
Naveen

Hi.
I'm not clear on what you are trying to accomplish with the alias pointing to the absolute
path of your WLS applications directory. This is not how the plugin works. As you have it
set up now the plugin looks for URLs with /weblogic in them and proxies those requests to a
running instance of WLS.
For example, the plugin will accept the following URL and forward it to WLS:
http://host:port/weblogic/index.html
WLS will respond IF you have a webapp named weblogic. From your example it looks like you
are trying to proxy to the petstore example. The URL to access the petstore example that
ships with wls is something like: http://localhost:7003/estore/control/main so if you want
to proxy by path you may want to proxy when the path contains /estore instead of /weblogic.
Hope this helps.
Michael
Naveen wrote:
Following are the additional configurations I used in httpd.conf after doing LoadModule
& AddModule
Alias /weblogic "/opt/BEA/wlserver6.1/config/petstore/applications"
<Location /weblogic>
SetHandler weblogic-handler
</Location>
<IfModule mod_weblogic.c>
WebLogicHost localhost
WebLogicPort 7003
</IfModule>
I get Permission denied & not even 403/forbidden for Petstore example jsps. I
am trying
to proxy it by URL basis not on mime type. I tried doing same thing for one of
my own domains
& server. The results were same. Now, If I try to comment out the Alias line from
my httpd.conf
file, it gives me 404 error. Can anyone help me out in this regard? I doubt my
configurations
in my weblogic's config.xml file.
Thanks,
Naveen--
Michael Young
Developer Relations Engineer
BEA Support
[att1.html]

SSO is not working for SAPGUI for HTML

Hi Experts,
We have configured SSO between EP and ECC.SSO is working fine for SAPGUI for windows.But it is not working for SAPGUI for HTML.
Workflow iViews are getting error.
"SWITCH to HTTPS does not occur."
The domain names are different for EP and ECC.
Please let me know ,is there any settings need to check.
Regards,
Bala.

Hi
The point here is that your Portal server is on a different domain, so you have to configure the logon ticket issuer (portal) to generate logon ticket for multiple domains.
http://help.sap.com/saphelp_nw04s/helpdata/en/a0/88a340fa432b54e10000000a1550b0/frameset.htm
Best regards
Johann

JoinFieldValue function is not working for 'Partner'

Hi All,
I'm trying to get value from Partner in workflow, but there is an error message mentioned "<Partner>" is invalid, and then I'm looking for the online help, I found there is no referred record type for 'Partner', is JoinFieldValue function not working for 'Partner'?
Does anyone know about it?
Thanks in advance

Using the Copy function link on a new Web Link Filed, you can pass parameters from one Object to another.
1 - hit the "Copy" button on a CO Detail Page and grab the URL (This is the Destination Object, i'e I will pass information from Contact (Source) to this CO (Destination))
Ex: https://secure-rmsomxxxx.crmondemand.com/OnDemand/user/CustomObject5.New?CustomObject5.NewForm.Id=XXXXXXX&OMRET1=CustomObject5.Detail%3fOMTGT%3dCustomObject5.Detail%26OMTHD%3dCustomObject5DetailNav%26CustomObject5.Detail.Id%3dXXXXXXX%26ocTitleField%3dName%26ocTitle%3dXXXXXXXXX%26ocEdit%3dY&OMTGT=CustomObject5.NewForm&OMTHD=CustomObject5PreCopyNav&OMRET0=CustomObject5.HomePage&OCTYPE=
You would need only a small part from the above:
https://secure-rmsomxxxx.crmondemand.com/OnDemand/user/CustomObject5.New?CustomObject5.NewForm.[Field you want to Copy]
2 - Create a Weblink field on Contact and Expose it on the layout your role can see.
3 - In the Weblink URL use the below
https://secure-rmsomxxxx.crmondemand.com/OnDemand/user/CustomObject5.New?CustomObject5.NewForm.Description=%%%First_Name%%%
Save your changes and you're done! you can now see that when you click the link you can pass the Contact First Name in the CO.
Good Luck!
Royston

I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

A reply to similar question (Q & As , in product page Apple Store) says:
"...dissable the internal reader hardware from devices setup. Then plug the external usb superdrive and that's it." Answered by Enrique T from Lima Oct 25 2013.
If you can locate an external Apple USB 'Air" superdrive for earlier model MacBook Air, that should work. The newer one for the Air is the same as for iMac, now.
You may be able to use other brands of external USB optical drive with your older intel-based iMac, as some of them function capably. A few should also be able to see system discs or other bootable utilities on DVD.
Hopefully this helps.
Good luck & happy computing!

I installed OS X Mavericks and now my Epson Scanner Perfection Series V330 Photo refuses to open. Is there a new driver available? I am scanning my work for a book publication and I need my scanner urgently. I tried Image capture but scanner is not detect

I installed OS X Mavericks and now my Epson Scanner Perfection Series V330 Photo refuses to open. Is there a new driver available? I am scanning my work for a book publication and I need my scanner urgently. I tried Image capture but scanner is not detected.

Looks like all Epson scanners will fail under Mvrx. And who knows when an updated driver will be available. It's not as if they have had a while to do it already.
After I noticed mine wouldn't work, I deleted my Workforce 610 and re-added it by pressing the + and instead of going for the IP versions that may pop up, that they say to do under normal conditions, select the Bonjour version. When you select the new printer/scanner in the Printers & Scanners Control Panel, then open the control window and then look in the dock and see if your printer is there. Right click on it and go to "Keep in Dock" for easy Access. In the printer panel there should be a little picture of a scanner on the right side. Click on it or type Commmand-3 and the built-in scanner software/utility will come up. After playing with it I think it's better than and there are some cool features that are not in the stock Epson software.
Hope this helps.

I started the OS system from a backup hard drive. Now My Adobe products doesnt work. "the licensing does not work for this product" Error code 150:30. Help me please!!

I started the OS system from a backup hard drive. Now My Adobe products doesnt work. "the licensing does not work for this product" Error code 150:30. Help me please!!

Reinstall the software properly. migration/ backups do not work due to the specific requirements of the activation system.
Mylenium

After Upgradation BPF is not working for some users

Hi All,
We have recently upgraded from BPC 5.1 to 7MS SP7. we are having multi server setup with one application / reporting server (windows 2003 and one sql server 2008 (windows 2003 64 bit).
Intially before upgradation we don't have any issues with BPF and it worked fine for all users. But post upgradation tasks within the BPF does not work for other users except for the first two people who first used it. Other users have the same rights as the ones who can access the tasks.
when they click on the link it gets them to eExcel and the right application but doesnt open the package or report assigned to the task. It doesn't give us any errors, on the status bar we get a message finalising but does not getting any thing.
Any inputs ??

Hi,
Are you sure that those users have installed BPC 7 SP7 clients on their machine? Meaning that you uninstalled 5.1 clients and installed the new client from http://servername/Osoft?
If yes, you should maybe run a client diagnostic on the machines and also check the Management Console for any error messages.
Hope this will drive you to a potential solution.
Best Regards,
Patrick

Auto_lexer (stemming) not working for other languages(other than english)

Hi All,
We are planning to use AUTO_LEXER instead of MULTI_LEXER and observed that stemming is not working for German where as it is working for English when I use AUTO_LEXER. I even used query templates but of no use.
But when i use MULTI_LEXER, creating sub lexers for German and Enlgish, Stemming is working for German also after changing the session language and setting stemmer of wod list to German (Which is expected).
Following is the code for AUTO_LEXER creation:
CREATE TABLE test_auto_lexer(pkey NUMBER(5,0),
lang_index VARCHAR2(3),
content_text CLOB,
CONSTRAINT test_auto_lexer_pk primary key (pkey))
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (1,'eng','I drive a bike')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (2,'eng','I drove a bike')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (3,'eng','I have driven a bike')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (4,'eng','Just check for other things')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (5,'eng','always drive a car')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (6,'eng','it is nothing')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (7,'ger','Ich fahre ein Fahrrad')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (8,'ger','Ich fuhr ein Fahrrad')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (9,'ger','Ich habe ein Fahrrad gefahren')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (10,'ger','Aktivieren Sie einfach für andere Dinge')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (11,'ger','immer Auto fahren')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (12,'ger','es ist nichts')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (13,'ger','sprechen')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (14,'ger','sprach')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (15,'ger','gesprochen')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (16,'ger','tale')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (17,'ger','Indlæg')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (18,'ger','tales')
BEGIN
ctx_ddl.create_preference('auto_lexer1', 'auto_lexer');
END;
BEGIN
ctx_ddl.set_attribute('auto_lexer1','index_stems','yes');
END;
BEGIN
ctx_ddl.set_attribute('auto_lexer1','language','danish english german');
END;
BEGIN
ctx_ddl.set_attribute('auto_lexer1','alternate_spelling','german');
END;
CREATE INDEX test_auto_lexer_ix1
ON test_auto_lexer(content_text)
INDEXTYPE IS ctxsys.context
PARAMETERS ('datastore ctxsys.direct_datastore filter ctxsys.null_filter lexer auto_lexer1')
select to_char(content_Text) from test_auto_lexer where contains(content_text,
'<query>
<textquery lang="ger" grammar="context">
$fahren
</textquery>
<score datatype="integer"/>
</query>') > 0
this doesnt work even after changing the session language. My default Sesson language is AMERICAN.
Could any one help me with this, in case I am missing something here. I would be really thankful.
Edited by: Nagendra Prasad on Jan 23, 2010 12:05 AM

In the future, please begin a new thread for a new question and provide a link to a related question.
According to the online documentation, Oracle only supports stemming for English, Dutch, French, German, Italian, Spanish, and Japanese. Oracle does not support Russian stemming, although you may have gotten some accidental results, due to identifying it as a different language and applying stemming rules for that language. The following manual sections show the languages available for the index_stems attribute of the basic_lexer and stemmer attribute of the basic_wordlist:
Basic_lexer attributes:
http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#CIHHBAAD
Basic_wordlist attributes:
http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#g1019326
Also, please see the following note:
Features not available in 11.2.0.3:
http://docs.oracle.com/cd/E11882_01/readmes.112/e22488/toc.htm#BABDGGDB
"Certain Oracle Text functionality based on third-party technologies, including AUTO_LEXER and CTX_ENTITY, have been disabled in this release (reference Bug 12618046). For BASIC_LEXER, the usage of the INDEX_STEMS attribute values that depend on third-party technologies, is also affected. If this impacts an existing application, contact Oracle Support Services for guidance."
Also, the auto_lexer has been replaced by the world_lexer, which only has one attribute:
http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#BHCJEGFJ
I don't work for Oracle, so I don't know why they do things the way they do.
So, you need to stick with the basic_wordlist for stemming, not the lexers. However, you may get better performance by combining the multi_lexer with the basic_wordlist, as the multi_lexer eliminates time spent on automatic language detection. But, you need to remember not to use the index_stems with your lexer, since it will conflict with the wordlist. I am not experiencing any time problems as you have. Please see the demo below. I have provided the whole script below that, so that you can reproduce it on your system. If you still have problems, then it may be due to differences in versions.
-- demo:
SCOTT@orcl_11gR2> select * from v$version
2 /
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
5 rows selected.
SCOTT@orcl_11gR2> select value from v$nls_parameters
2 where parameter = 'NLS_CHARACTERSET'
3 /
VALUE
AL32UTF8
1 row selected.
SCOTT@orcl_11gR2> DROP TABLE news
2 /
Table dropped.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('my_wordlist')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('global_lexer')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('english_LEXER')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('german_LEXER')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> CREATE TABLE news
2 (pkey NUMBER,
3 lang VARCHAR2 (2),
4 short_content CLOB)
5 /
Table created.
SCOTT@orcl_11gR2> INSERT ALL
2 INTO news (pkey, lang, short_content)
3 VALUES (1, 'en', 'I drive a bike.')
4 INTO news (pkey, lang, short_content)
5 VALUES (2, 'en', 'I drove a bike.')
6 INTO news (pkey, lang, short_content)
7 VALUES (3, 'en', 'I have driven a bike.')
8 INTO news (pkey, lang, short_content)
9 VALUES (4, 'en', 'I always drive a car')
10 INTO news (pkey, lang, short_content)
11 VALUES (5, 'en', 'This is nothing')
12 INTO news (pkey, lang, short_content)
13 VALUES (6, 'de', 'Ich fahre ein Fahrrad.')
14 INTO news (pkey, lang, short_content)
15 VALUES (7, 'de', 'Ich fuhr ein Fahrrad.')
16 INTO news (pkey, lang, short_content)
17 VALUES (8, 'de', 'Ich habe ein Fahrrad gefahren.')
18 INTO news (pkey, lang, short_content)
19 VALUES (9, 'de', 'Ich habe immer ein Auto fahren.')
20 INTO news (pkey, lang, short_content)
21 VALUES (10, 'de', 'Es ist nichts.')
22 SELECT * FROM DUAL
23 /
10 rows created.
SCOTT@orcl_11gR2> BEGIN
2 -- word list:
3 ctx_ddl.create_preference ('my_wordlist', 'basic_wordlist');
4 ctx_ddl.set_attribute ('my_wordlist', 'stemmer', 'auto');
5 -- english lexer:
6 ctx_ddl.create_preference ('english_lexer', 'basic_lexer');
7 -- german lexer:
8 ctx_ddl.create_preference ('german_lexer', 'basic_lexer');
9 ctx_ddl.set_attribute ('german_lexer', 'composite', 'german');
10 ctx_ddl.set_attribute ('german_lexer', 'alternate_spelling', 'german');
11 ctx_ddl.set_attribute ('german_lexer', 'mixed_case', 'no');
12 ctx_ddl.set_attribute ('german_lexer', 'base_letter', 'yes');
13 -- multi_lexer:
14 ctx_ddl.create_preference ('global_lexer', 'multi_lexer');
15 ctx_ddl.add_sub_lexer ('global_lexer', 'default', 'english_lexer');
16 ctx_ddl.add_sub_lexer ('global_lexer', 'german', 'german_lexer');
17 END;
18 /
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> create index search_news
2 on news (short_content)
3 indextype is ctxsys.context
4 parameters
5 ('lexer global_lexer
6 language column lang
7 wordlist my_wordlist')
8 /
Index created.
SCOTT@orcl_11gR2> EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'NEWS')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> COLUMN short_content FORMAT A30
SCOTT@orcl_11gR2> ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'
2 /
Session altered.
SCOTT@orcl_11gR2> set timing on
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$drive') > 0
3 /
 PKEY LA SHORT_CONTENT
 1 en I drive a bike.
 2 en I drove a bike.
 3 en I have driven a bike.
 4 en I always drive a car
4 rows selected.
Elapsed: 00:00:00.05
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$drove') > 0
3 /
 PKEY LA SHORT_CONTENT
 1 en I drive a bike.
 2 en I drove a bike.
 3 en I have driven a bike.
 4 en I always drive a car
4 rows selected.
Elapsed: 00:00:00.05
SCOTT@orcl_11gR2> ALTER SESSION SET NLS_LANGUAGE = 'GERMAN'
2 /
Session altered.
Elapsed: 00:00:00.01
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$fahr') > 0
3 /
 PKEY LA SHORT_CONTENT
 6 de Ich fahre ein Fahrrad.
 7 de Ich fuhr ein Fahrrad.
 8 de Ich habe ein Fahrrad gefahren.
 9 de Ich habe immer ein Auto fahren
4 rows selected.
Elapsed: 00:00:00.07
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$fuhr') > 0
3 /
 PKEY LA SHORT_CONTENT
 6 de Ich fahre ein Fahrrad.
 7 de Ich fuhr ein Fahrrad.
 8 de Ich habe ein Fahrrad gefahren.
 9 de Ich habe immer ein Auto fahren
4 rows selected.
Elapsed: 00:00:00.16-- script for you to reproduce the demo on your system:
select * from v$version
select value from v$nls_parameters
where parameter = 'NLS_CHARACTERSET'
DROP TABLE news
EXEC CTX_DDL.DROP_PREFERENCE ('my_wordlist')
EXEC CTX_DDL.DROP_PREFERENCE ('global_lexer')
EXEC CTX_DDL.DROP_PREFERENCE ('english_LEXER')
EXEC CTX_DDL.DROP_PREFERENCE ('german_LEXER')
CREATE TABLE news
(pkey NUMBER,
 lang VARCHAR2 (2),
 short_content CLOB)
INSERT ALL
INTO news (pkey, lang, short_content)
VALUES (1, 'en', 'I drive a bike.')
INTO news (pkey, lang, short_content)
VALUES (2, 'en', 'I drove a bike.')
INTO news (pkey, lang, short_content)
VALUES (3, 'en', 'I have driven a bike.')
INTO news (pkey, lang, short_content)
VALUES (4, 'en', 'I always drive a car')
INTO news (pkey, lang, short_content)
VALUES (5, 'en', 'This is nothing')
INTO news (pkey, lang, short_content)
VALUES (6, 'de', 'Ich fahre ein Fahrrad.')
INTO news (pkey, lang, short_content)
VALUES (7, 'de', 'Ich fuhr ein Fahrrad.')
INTO news (pkey, lang, short_content)
VALUES (8, 'de', 'Ich habe ein Fahrrad gefahren.')
INTO news (pkey, lang, short_content)
VALUES (9, 'de', 'Ich habe immer ein Auto fahren.')
INTO news (pkey, lang, short_content)
VALUES (10, 'de', 'Es ist nichts.')
SELECT * FROM DUAL
BEGIN
-- word list:
ctx_ddl.create_preference ('my_wordlist', 'basic_wordlist');
ctx_ddl.set_attribute ('my_wordlist', 'stemmer', 'auto');
-- english lexer:
ctx_ddl.create_preference ('english_lexer', 'basic_lexer');
-- german lexer:
ctx_ddl.create_preference ('german_lexer', 'basic_lexer');
ctx_ddl.set_attribute ('german_lexer', 'composite', 'german');
ctx_ddl.set_attribute ('german_lexer', 'alternate_spelling', 'german');
ctx_ddl.set_attribute ('german_lexer', 'mixed_case', 'no');
ctx_ddl.set_attribute ('german_lexer', 'base_letter', 'yes');
-- multi_lexer:
ctx_ddl.create_preference ('global_lexer', 'multi_lexer');
ctx_ddl.add_sub_lexer ('global_lexer', 'default', 'english_lexer');
ctx_ddl.add_sub_lexer ('global_lexer', 'german', 'german_lexer');
END;
create index search_news
on news (short_content)
indextype is ctxsys.context
parameters
('lexer global_lexer
 language column lang
 wordlist my_wordlist')
EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'NEWS')
COLUMN short_content FORMAT A30
ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'
set timing on
select * from news
where contains (short_content, '$drive') > 0
select * from news
where contains (short_content, '$drove') > 0
ALTER SESSION SET NLS_LANGUAGE = 'GERMAN'
select * from news
where contains (short_content, '$fahr') > 0
select * from news
where contains (short_content, '$fuhr') > 0
/

Fingerprint utility is not working for normal users - Tecra M11

Hi All,
I installed windows 7 pro in Tecra M11 laptop and the Toshiba finger print utility is not working for normal users.
It is working only for domain administrators. The TFPU is not working for, normal domain users, local users, local administrators. If we run the utility it will ask to enter the windows password and once we applied the password then the message saying "entered password is not valid" will prompt even if we are trying to use the utility first time.
If we try with a domain admin account it will work without any problem. Can somebody help me to trouble shoot this issue?
Thanks.

People nowadays experienced that no matter How many times we glide our finger it have no response.In this instance, you might be very afraid of Windows password lost by reason that there is a plenty of important data on your PC.
Then what should you do? One choose is fix the Fingerprint scanners, but this method will cost a lot of money. The other is use the Windows password function to solve the problem. Certainly, this is a very safer, faster and easier to use method for you.
According my personal experience, you can try these three ways to re-access to your PC:
Method 1: Login with the default administrator account
* Step 1: Start Windows PC
* Step 2: When you can see the Windows login screen, press ctrl+alt+del keys Twice and it'll show Classic Login box
* Step 3: Type Administrator as Username and leave the password field blank
* Step 4: Press the Enter Key and then you can be able to login the default windows administrator account which is it created by default when install windows.
*Note:* This trick is only work for Windows XP. And when you input the key combination Please don't put the cursor on any account. And if you change the name or password before, you cannot login by this way.
Method 2: Use the previous password reset disk
This method describes how to create and use a password reset disk for a computer that is a member of a domain. You can use a Windows password reset disk to gain access to your Microsoft Windows Professional-based computer if you forget your Windows password. Please click here to learn more.
Method 3: Using Windows Password Unlocker
Using Windows password remove software is could be the fastest and easiest way for you to reset your Windows password while you didn't create a password reset disk before.
There are 2 options for you: recover Windows password with a bootable CD/DVD or recover Windows password with a USB flash drive.
Before starting, a bootable CD/DVD or USB flash drive and a computer with CD drive are required. (Internal CD drive and external CD drive are both OK.
Option 1: Recover Windows password by burning a bootable CD/DVD
Option 2: Recover Windows password by burning a USB flash drive
The whole Windows password recovery process can be divided to 3 big steps:
* >> Step 1: Burn a USB flash drive to remove lost Windows password
* >> Step 2: Set your target computer to boot from USB
* >> Step 3: Recover forgotten Windows password with the burned USB flash drive
In fact, all you need is a *Windows Password Unlocker www.passwordunlocker.com/windows-password-recovery.html which can help you directly reset your windows xp password, and then you can login your XP without a password required. Of course, there are also some other ways to do it, but this way may be most convenient one.

Bluetooth Driver In Windows 8.1 is Not Working [Model :- F0D96EA#ABV]

Bluetooth Driver In Windows 8.1 is Not Working [Model :- F0D96EA#ABV]
When I connect the phone he load and then says no connect

Hi,
Please try the following driver for "MediaTek (Ralink) Bluetooth":
http://ftp.hp.com/pub/softpaq/sp65501-66000/sp65804.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Jdbc drive for oracle7.3.4 is not working for me

Similar Messages

Maybe you are looking for