JDBC for JDK1.1 connection with Oracle 8.0.5

I have a client running Oracle 8.0.5 on an NT machine. I have downloaded the 8.0.5 OCI8 and thin JDBC from Oracle web site.
Using the JdbcChecker.java sample code, I am unable to make a connection to the Oracle DB. I tested JDK1.1.8 with the new jdbc and also with the jdbc that originally came with Oracle (orant\jdbc\lib) but to no avail. I tested JDK1.2.2 with the 8.1.5 jdbc, also no luck. I compiled and ran the code each time, using
DriverManager.getConnection("jdbc:oracle:thin:@" + database, username, password);
where database is a.b.c.d:port_no:sid
The error that came out for jdk1.1.8 was:
(after printing out 'connecting...')
java.sql.SQLException: Refused: ROR=(CODE=12505) (EMFI=4)))) ....
Is there a daemon or something that is not running? I am new to Oracle but not to jdbc. My client has used Oracle a lot but not doing any java programming with it.
What am I missing here?
Thanks.

Could you verify that the listener for the database is configured properly and that it is running?

Similar Messages

Cannot establish connection with Oracle database

Hello
This is the first time I use BOE server with Crystal Report to execute some tests, and one issue is blocking me now, and I am not even sure if this is the right Forum where I should post it.
I installed BOE server XI 3.1 SP4 on Linux machine (new installation), and then I uploaded some existing Crystal Report templates that are working fine on another BOE server. Those CR templates have to establish a connection with a remote Oracle database to get the data, and we pass all credentials for this purpose.
The first time I run my first test I received this error that I could not find anywhere on the web :
ErrorLog 2011 8 10 7:05:52.505 14215 356 (Administrator:82) (../reporthandler.cpp:12462): CReportHandler::buildReportViewerError: CSResultExceFailed to open the connection." FileName:"../reporthandler.cpp" LineNum:12458 ErrorCode:756 ErrorMsg:"Failed to open the connection.
{FBAD55EE-BEAF-11E0-BC1C-005056813A72}.rpt" DetailedErrorMsg:""
I believe that the CR was not able to establish the connection with Oracle, so I install Oracle Client on the same machine (test remote connection ==> pass), I set the ORACLE_HOME variable, and I edit the file <installation_home>/ bobje/java/CRConfig.xml to add the path to ojdbc14.jar, and finnaly restart the tomcat server. However I am still getting the same error message.
Is there any hint that can help me troubleshooting this issue?
Thank you

do the reports use native oracle connectivity or JDBC ?
what version of Oracle client did you install ?
was it 32bit or 64bit client ?
what your LD_LIBRARY_PATH variable set to ?
what does it say in the CMC when you look at CR report's DB properties ?

How to connect with Oracle in java

Hello!
I would like to use java for my graduation project. And connect with Oracle in java.
I used j2sdk1.4.2_04 and Oracle 9i release 9.2.0.1.0
May I ask where could supply me information or content ?
Thanks!!

hi jus a sample code
public class DbUtil {
// Connection instance
private static Connection conn = null;
private Object connection;
public DbUtil() {
     // Connect to the database
dbConnect();
* This method performs the clean up action and closes the application
void exitDbUtil(){
// If connected to database
if (conn != null) {
try {
// Close the connection
conn.close();
conn=null;
catch (Exception ex){      // Trap errors
System.out.println(" Error while Closing the connection: "+ex.toString());
* Creates a database connection object
private void dbConnect() {
try {
String driverName = "oracle.jdbc.driver.OracleDriver";
Class.forName(driverName);
String url = "jdbc:oracle:thin:@" + ConnectionParams.s_hostName +
          ":" + ConnectionParams.s_portNumber +
          ":" + ConnectionParams.s_databaseSID;
// Create a connection object
conn = DriverManager.getConnection(url, ConnectionParams.s_userName,
                         ConnectionParams.s_password);
catch(Exception e){

What XA JDBC driver should I use with Oracle 8i 8.1.6

I need to use an XA JDBC driver for Oracle 8i 8.1.6. I am using the driver in
a ConnectionPool in a TxDataSource for use by some entity beans using EJB 2.0.
I'm running WebLogic Server 6.0 sp2, EJB 2.0, Java 2 SDK 1.3.1 Server VM, Solaris
2.7, and Oracle 8i 8.1.6.
I know of three different Oracle XA drivers: WebLogic jDriver for Oracle XA, Oracle
OCI type 2 driver XA, and Oracle Thin tyoe 2 XA. Are there any other drivers
that I can use for Oracle 8.1.6? Which driver and which version should I use?
For example, can I use the Oracle 8.1.7 JDBC drivers with the Oracle 8.1.6 server,
or would the Oracle 9i drivers work with the Oracle 8i server? Which drivers
are faster, and which support more features? I assume that I should not use the
type 4 driver since I am not using an applet, but I don't know if there are bugs
in the OCI C library for Solaris or in the JDBC drivers that use it that prevent
XA from woking. Which version of the Oracle C OCI library should I use if I use
a type 2 driver?
Thanks,
Ross Goldberg

Hi,
I think you can't use the 8.1.6 thin driver for XA, you would have to
use the OCI driver or 2PC-enable your datasource. AFAIK this has been
changed for 8.1.7
Check http://e-docs.bea.com/wls/docs61/////jta/thirdpartytx.html.
Daniel
-----Original Message-----
From: Gene Chuang [mailto:[email protected]]
Posted At: Thursday, August 30, 2001 2:04 AM
Posted To: jdbc
Conversation: What XA JDBC driver should I use with Oracle 8i 8.1.6
Subject: Re: What XA JDBC driver should I use with Oracle 8i 8.1.6
I've asked this question before. This is the reply from Joe
Weinstein:
For reliability and JDBC 2.0 compliance, I recommend the
Oracle thin driver.
If not that driver, you should verify that a type-2 driver
actually does
deliver better performance, but then I would not have a
strong preference
between their type-2 and ours. Theirs may be faster, and JDBC
2.0 compliant.
Both are succeptible to OCI bugs, some of which only they can
fix, but we
listen.
Gene
"Ross Goldberg" <[email protected]> wrote in message
news:[email protected]...
>
I need to use an XA JDBC driver for Oracle 8i 8.1.6. I am using thedriver in
a ConnectionPool in a TxDataSource for use by some entity beans usingEJB 2.0.
I'm running WebLogic Server 6.0 sp2, EJB 2.0, Java 2 SDK 1.3.1 ServerVM, Solaris
2.7, and Oracle 8i 8.1.6.
I know of three different Oracle XA drivers: WebLogic jDriver forOracle XA, Oracle
OCI type 2 driver XA, and Oracle Thin tyoe 2 XA. Are there any otherdrivers
that I can use for Oracle 8.1.6? Which driver and which versionshould I use?
For example, can I use the Oracle 8.1.7 JDBC drivers with the Oracle8.1.6 server,
or would the Oracle 9i drivers work with the Oracle 8i server? Whichdrivers
are faster, and which support more features? I assume that I shouldnot use the
type 4 driver since I am not using an applet, but I don't know ifthere are bugs
in the OCI C library for Solaris or in the JDBC drivers that use itthat prevent
XA from woking. Which version of the Oracle C OCI library should Iuse if I use
a type 2 driver?
Thanks,
Ross Goldberg

Problem in connecting with Oracle

hi everybody
I have a problem in connecting with Oracle express 10g. I got an error that doesn't allow me to connect. hope anyone can help me and solve this problem
--------------------Configuration: test - JDK version 1.6.0_20 <Default> - <Default>--------------------
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:414)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
at java.sql.DriverManager.getConnection(DriverManager.java:582)
at java.sql.DriverManager.getConnection(DriverManager.java:185)
at DB.dbConnect(test.java:36)
at test.main(test.java:18)
this is the code that I'm following
import java.io.*; import java.sql.*; public class test2 { public static void main(String[] args) { try { Connection con=null; Class.forName("oracle.jdbc.driver.OracleDriver"); con=DriverManager.getConnection( "jdbc:oracle:thin:@PLANET:1521:ORCL", "scott", "tiger"); Statement s=con.createStatement(); s.execute("INSERT INTO BOOKS VALUES('A Tale of Two Cities','William Shakespeare',4567891231,'05-JAN-1962')"); s.close(); con.close(); } catch(Exception e){e.printStackTrace();} } }
Edited by: Vantasia on Nov 12, 2010 10:18 AM

1. Is the connection url correct?
"jdbc:oracle:thin:@PLANET:1521:ORCL" is fine.
2. Is the TNS listener started?
c:\oracle\product\ora10\bin> lsnrctl status
3. Is a firewall between client and database server?
Connection url with firewall would be different.
http://download.oracle.com/docs/cd/B28359_01/java.111/b31224/jdbcthin.htm#i1004276

Using multipool Connections with Oracle 8i OPS Parallel Server

Does anyone have any experience using multipool JDBC connections with Oracle 8i OPS? During a oracle node failure, we are seeing all of the connections fail. Any help you could give me her would be greatly appreciated!

hal lavender wrote:
Hi,
I am trying to achieve Load Balancing & Failover of Database requests to two of the nodes in 8i OPS.
Both the nodes are located in the same data center.
Here comes the config of one of the connection pools.
<JDBCConnectionPool CapacityIncrement="5" ConnLeakProfilingEnabled="true"
DriverName="oracle.jdbc.driver.OracleDriver" InactiveConnectionTimeoutSeconds="0"
InitialCapacity="10" MaxCapacity="25" Name="db1Connection598011" PasswordEncrypted="{3DES}ARaEjYZ58HfKOKk41unCdQ=="
Properties="user=ts2user" Targets="ngusCluster12,ngusCluster34" TestConnectionsOnCreate="false"
TestConnectionsOnRelease="false" TestConnectionsOnReserve="true" TestFrequencySeconds="0"
TestTableName="SQL SELECT 1 FROM DUAL" URL="jdbc:oracle:thin:@192.22.11.160:1421:dbinst01" />
<JDBCConnectionPool CapacityIncrement="5" ConnLeakProfilingEnabled="true"
DriverName="oracle.jdbc.driver.OracleDriver" InactiveConnectionTimeoutSeconds="0"
InitialCapacity="10" MaxCapacity="25" Name="db2Connection598011" PasswordEncrypted="{3DES}ARaEjYZ58HfKOKk41unCdQ=="
Properties="user=ts2user" Targets="ngusCluster12,ngusCluster34" TestConnectionsOnCreate="false"
TestConnectionsOnRelease="false" TestConnectionsOnReserve="true" TestFrequencySeconds="0"
TestTableName="SQL SELECT 1 FROM DUAL" URL="jdbc:oracle:thin:@192.22.11.161:1421:dbinst01" />
<JDBCMultiPool AlgorithmType="Load-Balancing" Name="pooledConnection598011"
PoolList="db1Connection598011,db2Connection598011" Targets="ngusCluster12,ngusCluster34" />
Please let me know , if you need further information
HalHi Hal. All that seems fine, as it should be. Tell me how you
enact a failure so that you'd expect one pool to still be good
when the other is bad.
thanks,
Joe

The network adapter could not establish the connection with Oracle

I installed Oracle in my laptop (windows 2008), and install Hyperion 11.1.2, when I configure Hyperion, it pops up with "the network adapter could not establish the connection with Oracle"?

Hi,
This usually means that the connection details you have put in for Oracle are incorrect or Oracle can not be contacted.
Double check your configuration connection details and make sure you can access Oracle using them details.
Cheers
John
http://john-goodwin.blogspot.com/

Forms 6i is not connecting with Oracle 11g database?

Forms 6i is not connecting with Oracle 11g database?
How to resolve this issue?

Hi,
Once you installed the Forms and Reports, you need to configure the paramters like tnsnames.ora in you path.
There will be one folder in the Installation path of Forms and Reports search for tnsnames.ora file..and you need to Updated the file as per the which ORACLE Server you are connecting and then try.. it..
Default path for forms will be "ORACLE_HOME/net80/admin".. search for tnsnames.ora and modify it..
- Pavan Kumar N

Exmpl of Servlet connect with ORacle

Hi folks,
Can anyone send me example of Java Servlet connectivity with Oracle.
i m not able to connect servlet with oracle.
u guys can reply me on [email protected]
thanks
dal hit

No.
The code for connecting to Oracle from a Servlet is no different from connecting to Oracle from any other Java application. So tell you what, you show us what you've tried and the error message(s) and we'll help you debug it.
99.999% of the time it's a failure to put the driver Jar file into the classpath, the specifics of which vary from application server to application server. Which one are you using?
u guys can reply me on [email protected]
We can, but we won't. This is not your personal bugfixing service. Pay if you want that kind of help. If you want it for free, do it through the forums or go away.
Probably you'll never read this response, but that's your problem not mine.

"stack overflow" when trying to connect with Oracle ODBC

Hi,
I'm trying to connect to Oracle DB (8.1.7.3.0) from WinNT 4.0 SP6 with Oracle ODBC driver 8.0.6.6.0. I've been trying to connect with "Oracle ODBC Test" and with "MS Query". In either way I end up with Dr. Watson reporting about "stack overflow". Before starting to upgrade ODBC driver I wanted to ask - should these versions of driver and DB work together at all (even unofficially)? Or may I be missing some other thing? Any hints, ideas are welcome.
Regards,
Madis Priilinn

Thank You for replying, Justin!
Yes, I can connect successfully to the database through other tools - at the moment I tried SQL*Plus, Net8 Easy Config and Schema Manager.
The Oracle client in the NT machine is 8.0.5.0.0. And unfortunately I do not know anything about the Oracle installation on this machine and at the moment I don't have that person near me too whom to ask also. But I think the installation was ok, because the connection through ODBC was working before the DB upgrade as far as I understood (sorry, again at the moment I don't know what was the previous version of DB. I will ask that information as soon as possible).
The main problem that bothers me at the moment is that I can't install 8.1.* series OraODBC driver with 8.0.5.0.0 Oracle Installer. I managed to install 8.0.6.6.0 version of the driver, but not the newer ones. As far as I've understood I have to upgrade the whole Oracle in the NT machine to upgrade that installer. Am I correct?
Regards,
Madis Priilinn

Howmany oracle user connect with oracle server.

hi all
howmany oracle user connect with oracle server.
i want query for above sentance.

Robert,
This query will show us the username who are connect to a particular database. If OP wants that how many overall users are connected to his/her oracle server (which is having more than one db) then please tell us. Suppose 10 users are connected with db1 and 20 users are connected with db2.. like that.
Regards
Girish Sharma

CC - Connecting with Oracle ERP

Hi Expert!
Do anyone have connect Compliance Calibrator with Oracle???
I need some guide with the data extraction! can any one help me please? If anyone have some guide or steps to follow it would be perfect...
Regards,
Magaly

Magaly,
You need to use Greenlight Adapters to support GRC connection with oracle, jde and peoplesoft.
Please refer the following SAP Note for the supporting versions.( I don't have any documentation)
Note 1076755 - Greenlight Adapters- Versions of ORA, JDE and PS Supported
Thanks
Himadama

Do we need to create two zones for Two HBA for a host connected with SAN ?

Hi,While creating Zone , Do we need to create two zones for Two HBA for a host connected with SAN ? Or a zone is enough for
a host which having Two HBAs...We have two 9124s for our SAN fabric...
As I found like one zone below, I little bit confused that , if a host having two HBA connected with SAN, should I expect two zones for every Host?
from the zone set, I gave the command show zoneset
zone name SQLSVR-X-NNN_CX4 vsan 1
    pwwn 50:06:NN:NN:NN:NN:NN:NN
    pwwn 50:06:NN:NN:NN:NN:NN:NN
          pwwn 10:00:NN:NN:NN:NN:NN:NN
But I found only one zone for the server's HBA2:by the same time in the fabric I found switches A & B showing the WWNs of those HBAs on its
connected N port...Its not only for this server alone, but for all hosts..Can you help me to clarify on this please..that should we need to create one zone for
one HBA?

if u have two independent fabrics between hosts and storage, i think the below confs are recommended.
Scenario 1: 2 HBAs single port each ( redundancy across HBA / Storage port )
HBA1 - port 0 ---------> Fabric A ----------> Storage port ( FAx/CLx )
HBA2 - port 0 ---------> Fabirc B ----------> Storage port ( FAy/CLy )
Scenario 2: 2 HBAs of dual port each
HBA1 - port 0 -------> Fabric A ---------> Storage port ( FAx/CLx )
HBA2 - port0 ---------> Fabric A ---------> Storage port ( FAs/CLs )
HBA1 - port 1 --------> Fabric A --------> Storage port ( FAy/CLy )
HBA2 - port 1 ---------> Fabric B --------> Storage port ( FAt/CLt )
the zone which is in your output is VSAN 1. if its a production VSAN, Cisco doesn't recomends to use VSAN 1 ( default vsan ) for production.

DB2 OS400 Connection with Oracle Reports 9i with Windows XP

Dear Friends
I have a valid ODBC connection of DB2 OS400 and i am using the same with Crystal Report i want to use the same connection with oracle Reports 9i & Forms 9i.
The response will be highly appriciated.
Rgds
Muhammad Tahir Khan

duplicate post.
DB2 OS400 Connection with Oracle Reports

Where is the forum for Fusion Report Service with Oracle Reports?

Where is the forum for Fusion Report Service with Oracle Reports?

You could try this one, maybe post your question.

JDBC for JDK1.1 connection with Oracle 8.0.5

Similar Messages

Maybe you are looking for