JDBC Receiver adapter not reaching timeout

Hi Everyone,
The adapter is hooked up with the Oracle DB version 10g 10.2.0.5. We are trying to run a stored procedure to clear the tables before the INSERT.
Stored Procedure:
BEGIN
Truncate AD.SAP_DIR table */
EXECUTE IMMEDIATE 'TRUNCATE TABLE AD.SAP_DIR';
ResponseOut := 'COMPLETE';
END;
No matter whatever we try the message are not leaving the status "Delivering" in message monitoring. We have tried to use the timeout parameters as mentioned below, but no luck and the DB also holds the thread after executing the TRUNCATE command.
poolWaitingTime 6000
driver:oracle.jdbc.ReadTimeout 5000
driver:oracle.net.CONNECT_TIMEOUT 5000
sqlquerytimeout 20
It would be highly appretiated if you can throw some light on this.
Thanks,
AJ

Thanks for the reply Basker.
logSQLStatment is already added. There is no firewall issue. We have tested this interface with an INSERT statement and it updates the database properly.
The trace stops at the point after calling the Stored procedure. DBA says the PROC gets executes successfully and thread waits for something else. In this case not sure why the thread is not reaching the timeout even after configuring the parameters.
Any thoughts.
Thanks,
AJ

Similar Messages

JDBC Receiver adapter-java.sql.SQLException: ORA-00904: "BATCH_ID": invalid

Hi
I am trying insert rows in Oracle database using JDBC receiver adapter setup in PI 7.1. However this receiver adapter is throwing following exception.
Delivering the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'PRADEEP_OTC_ORDERS' (structure 'statement'): java.sql.SQLException: ORA-00904: "BATCH_ID": invalid identifier .
<?xml version="1.0" encoding="UTF-8" ?>
<ns0:mt_sql_writer xmlns:ns0="http://rdbms_poc">
<statement>
     <dbtablename action="INSERT">
          <table>PRADEEP_OTC_ORDERS</table>
          <access>
               <order_id>19126</order_id>
               <version>1</version>
               <batch_id>132</batch_id>
          </access>
     </dbtablename>
</statement>
</ns0:mt_sql_writer>
PRADEEP_OTC_ORDERS table has just 3 columns as specified the access segment. However I stil get this ORA-00904 error message.
Any idea on what could be wrong.?
Thanks
-Pradeep

Hi All,
Thanks a lot for responding...
I verified the table structure, table just contains those 3 coulms all varchar type.
I modified the column name as well, But was still getting ORA-00904. Then I went directly to the the database and executed below insert statement,
insert into PRADEEP_OTC_ORDERS (mps_order_id, mps_version,mps_batch_id) Values(1,2,3)
I got exact SQL Error: ORA-00904: "MPS_BATCH_ID": invalid identifier.
So ISAP JDBC adapter is not enclosing the string values in quotes.
SAP documentation says it puts quotes for values and treats everything as string(text).
Anybody has any idea, why JDBC receiver adapter not enclosing the values in quotes?
Thanks
-Pradeep

JDBC receiver adapter for AS400-query time out due to Escape Symbol

Hello,
I am uisng JDBC receiver adapter for AS 400, When I execute query, the query needs to have arguments in the open and close single ticks ('    12345' )
My XML pay load looks like this, which is RFC sender. Look at dcudcstmr in <i><b>(' 838912')</b></i>. When receiver gets this message the ' (single quotes are disappeared.
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:MT_Cma_Customer_Select_Request xmlns:ns1="http://freemanco.com/xi/Get_Customer">
- <Statement>
- <LawsonCustomer action="SQL_QUERY">
<access>select f1.DACMCMPNY from sap.sapcustvew f1, sap.sapcustvew f2 where f2.dcudcstmr in <i><b>(' 838912')</b></i> and (f1.dcudcstmr=f2.dcudcstmr or f2.komaster=f1.dcudcstmr)</access>
</LawsonCustomer>
</Statement>
</ns1:MT_Cma_Customer_Select_Request>
On the Receiver JDBC adapter I have tried with different combinations of Escape Symbol for Aposrophe as follows
<b>   \
   '</b>
As you know this is related to epcape character, I get following error all the time. Looks like the query is not able to execute in the specified time. My question is how do I get single quote as part of query.
<b>select f1.DACMCMPNY from sap.sapcustvew f1, sap.sapcustvew f2 where f2.dcudcstmr in ( 100001) and (f1.dcudcstmr=f2.dcudcstmr or f2.komaster=f1.dcudcstmr) 2007-09-20 15:56:42 Error Unable to execute statement for table or stored procedure. 'LawsonCustomer' (Structure 'Statement') due to java.sql.SQLException:
[SQL0666] Estimated query processing time 13766 exceeds limit 8000. 2007-09-20 15:56:42 Error MP: exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'LawsonCustomer' (structure 'Statement'): java.sql.SQLException:
[SQL0666] Estimated query processing time 13766 exceeds limit 8000. 2007-09-20 15:56:42 Error Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'LawsonCustomer' (structure 'Statement'): java.sql.SQLException:
[SQL0666] Estimated query processing time 13766 exceeds limit 8000. 2007-09-20 15:56:42 Error Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'LawsonCustomer' (structure 'Statement'): java.sql.SQLException:
[SQL0666] Estimated query processing time 13766 exceeds limit 8000.. Setting message to status failed. 2007-09-20 15:56:42 Error The message status set to FAIL. 2007-09-20 15:56:42 Error Returning synchronous error message to calling application: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'LawsonCustomer' (structure 'Statement'): java.sql.SQLException:
[SQL0666] Estimated query processing time 13766 exceeds limit 8000</b>
Any feedback or helpfull tips appreciated.
Thank you,
Balaji

Raj,
Thank you for the reponse. I am using UDF on sender to generate sql statement as you see in sender XML message. After the message reaching receiver, gets executed but no response from AS400 becasue of missing single quotes in the sql query executed.
Sender XML sends
<access>select f1.DACMCMPNY from sap.sapcustvew f1, sap.sapcustvew f2 where f2.dcudcstmr in <u><b>(' 838912')</b></u> and (f1.dcudcstmr=f2.dcudcstmr or f2.komaster=f1.dcudcstmr)</access>
Receiver executes as
select f1.DACMCMPNY from sap.sapcustvew f1, sap.sapcustvew f2 where f2.dcudcstmr in ( <b><u>838912</u></b>) and (f1.dcudcstmr=f2.dcudcstmr or f2.komaster=f1.dcudcstmr)
As you see the single quotes are missing. Like I said in previous posting I tried with following Escape Symbol for Aposrophe.
Let me know if you need more information.
Thank you,
Balaji

Issue with processing time of JDBC receiver adapter

Hi all,
We are using PI 7.1 EHP1.
We have an issue with JDBC receiver adapter taking too much time to process messages.
We are using XML SQL format message protocol with INSERT_UPDATE as the document format.
Each message can contain multiple records, i.e. 1 single message can result in many updates/inserts.
Currently, time taken to process in 6-12 secs which is quite high considering the messages are not very large in size.
We sent the statements to Oracle DBA to see if anything about the queries being used is causing issues. Awaiting inputs.
In the mean time, wanted to check if there is anything that can be done from PI side that will help us improving the processing time.
Thanks in Advance,
Sailaja.

Hi,
       i think the main cause is query taking long time to execute in DataBase.
      -> increase the read time and response time in the JDBC receiver adapter.
In the advanced mode table section of sender channel and receiver channel configurations, we can set driver properties for each DB connection. Any such property would have to contain prefix 'driver:'(with out quotes).
For Oracle Database JDBC thin driver 10.2.0.3 version, the property oracle.jdbc.ReadTimeout helps to set read timeout while reading from the socket. Also for setting login time out in Oracle, we use oracle.net.CONNECT_TIMEOUT. To set these two properties use as follows: driver:oracle.jdbc.ReadTimeout 1000 driver:oracle.net.CONNECT_TIMEOUT 1000 The TimeOut Driver properties like ReadTimeout and CONNECT_TIMEOUT are in milliseconds.
Refer note 1078420 for more details
please go through this blog i hope it will help you.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747
regards,
ganesh
Edited by: ganesh.nijampudi on Oct 25, 2011 12:00 PM

Error while updating database using jdbc receiver adapter

Hi All,
I am trying to update a single record using jdbc receiver adapter.
This is my the message that is getting created..
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Data xmlns:ns0="urn:Test">
- <STATEMENT>
- <TABLENAME ACTION="UPDATE_INSERT">
<TABLE>ORDERS</TABLE>
- <ACCESS>
<OrderID>99999</OrderID>
<CustomerID>VICTE</CustomerID>
<EmployeeID>3</EmployeeID>
<ShipAddress>VICTE</ShipAddress>
</ACCESS>
- <KEY>
<OrderID compareOperation="EQ">99999</OrderID>
<ShipAddress compareOperation="EQ">VICTE</ShipAddress>
</KEY>
</TABLENAME>
</STATEMENT>
</ns0:Data>
But in Adapter Monitoring i am getting the following error..
<i>Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'ORDERS' (structure 'STATEMENT'): java.sql.SQLException: [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near 'VICTE'.</i>
Regards,
Rahul

Rahul,
> In this case i believe the interface has to be synch.
> So what will the response message type be like..
Not necessary. UPDATE can be asynch as well.
Can you turn the trace on like pointed by Michal and then you can see the Query in the Audit Log of the adapter montioring. Try to execute the same query from your DB Client like TOAD and see what is the Syntax error you are getiing.!
The problem looks like some field has some dataype / column name mismatch.
Regards
Bhavesh

JDBC Receiver Adapter -- Synch Select. ERROR

Hello,
We have implemented the scenario described by Bhavesh Kantilal in blog 3928:
JDBC Receiver Adapter -- Synchronous Select Step by Step
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
but modified to our requirements.
An Idoc is coming in, mapped to a sync receiver jdbc as described to collect data from a jdbc table.
Result when connecting the oracle database with the jdbc receiver adapter:
Error processing request in sax parser: Error when executing statement for table/stored proc. 'T_ST_MAINDRIVER' (structure 'STATEMENT'): java.sql.SQLException: ORA-00942: table or view does not exist
Oh, like to complete the information by the payload from the jdbc rec. connect:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_JDBC_LOOPUP_ID xmlns:ns0="http://www.xxx.org/excel">
- <STATEMENT>
- <TABLENAME ACTION="SELECT">
<TABLE>T_ST_MAINDRIVER</TABLE>
<ACCESS />
- <KEY>
<MAINDRIVER compareOperation="=">Optomechanical</MAINDRIVER>
</KEY>
</TABLENAME>
</STATEMENT>
</ns0:MT_JDBC_LOOPUP_ID>
The table exists on the database. So, what is our mistake? Do you have any ideas?
Best regards
Dirk
Message was edited by:
        Dirk Meinhard
Message was edited by:
        Dirk Meinhard

Hi Anil,
I am back on my JDBC problem and I am one step further!
Thank you for this hint. Looks like this is the solution.
So I like to add my next question !
My new error is resulting from my query command.
I have set "=" to find a specific entry as compare operation.
Error when executing statement for table/stored proc. 'IRIS.T_ST_MAINDRIVER' (structure 'STATEMENT'): java.sql.SQLException: FATAL ERROR document format in structure 'TABLENAME': unexpected value '=' for attribute 'compare' found
Looks like this is not ok .
This is my xml of this query:
<ns0:MT_JDBC_LOOPUP_ID xmlns:ns0="http://www.xxx.org/excel">
   <STATEMENT>
      <TABLENAME ACTION="SELECT">
         <TABLE>IRIS.T_ST_MAINDRIVER</TABLE>
         <ACCESS/>
         <KEY>
            <MAINDRIVER compareOperation="=">Optomechanical</MAINDRIVER>
         </KEY>
      </TABLENAME>
   </STATEMENT>
</ns0:MT_JDBC_LOOPUP_ID>
Can you, or anybody else, give the helping idea?
regards
Dirk

JDBC receiver adapter to call MS SQLServer stored procedure with parameters

We are trying to use the JDBC receiver adapter to call a stored procedure in MS SQLServer with parameters. According to the help documentation for the JDBC receiver adapter for action=EXECUTE, "The elements within the stored procedure are interpreted as parameters" and "The parameter names must be identical to those of the stored procedure definition". The parameters within a MS SQLServer stored procedure are required to begin with the '@' symbol. The element names within a XML document i.e. used to call the stored procedure can not contain a special character such as '@' in the first position. For all of the tests we have done where the parameter name in the XML document omits the '@' character, the parameters are not being received by the stored procedure. Is there a way around this problem?
Thank you,
Harold

Hello Harold - I am facing the EXACTLY SAME problem.Pls let me know how did you fix this problem ?
This is the message I am passing on to the DB SP:
<?xml version="1.0" encoding="UTF-8"?>
<MRIRequestInbound>
   <StatementName>
      <prc_FC_InsertStagingJournalEntries action="EXECUTE"/>
      <JournalData isInput="true" type="STRING">
<NewDataSet><Table ITEM = "" ENTITYID = "" PERIOD = "" ACCTNUM = "" DEPARTMENT = "" JOBCODE = "" AMT = "" REF = "" DESCRPN = "" ENTRDATE = "" BASIS = " " BALFOR = "N" REQUESTNUM = "" ACCTNAME = "" TYPE = "" DESCRPTN = "" GDEP_DESCRPN = "" GJOB_DESCRPTN = "" JOBTYPE = "" /></NewDataSet>
</JournalData>
   </StatementName>
</MRIRequestInbound>
Out of which,
<NewDataSet> tag contains the value of the parameter in the SP. So, my value to the SP's parameter is :
<NewDataSet><Table ITEM = "" ENTITYID = "" PERIOD = "" ACCTNUM = "" DEPARTMENT = "" JOBCODE = "" AMT = "" REF = "" DESCRPN = "" ENTRDATE = "" BASIS = " " BALFOR = "N" REQUESTNUM = "" ACCTNAME = "" TYPE = "" DESCRPTN = "" GDEP_DESCRPN = "" GJOB_DESCRPTN = "" JOBTYPE = "" /></NewDataSet>
Any clue ?
Cheers,
Amrish.

A wierd error of JDBC Receiver adapter

Dear Expert,
I got stuck by the JDBC receiver adapter with PI 7.11, the log is
'JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'null' (structure 'SYSTEM'): java.lang.IndexOutOfBoundsException: Index: 1, Size: 1'
explanation :
(1)SYSTEM is the first element in my XML sent to PI and I guarantee it has value, and there is no mapping with this field in the target table.
(2)I tested mapping and comminucation channel -> successfully
(3)db is oracle and the key field is mapped with value
Looking forward to your insight. Thanks very very much
Ray

Dear Expert :
Thanks for your reply, but I still could not figure out what had happened, it is so desperate.......
     Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'null' (structure 'BOOK'): java.lang.IndexOutOfBoundsException: Index: 1, Size: 1
The Oracle DB table has many fields and I mapped the key and other fields which could not be null.
I tried to create a very simple example to test like this , but still it pops up the error like before,
you can see the error message just replaces the text 'SYSTEM' to 'BOOK'.
'null' (structure 'SYSTEM'): (yesterday) ->   'null' (structure 'BOOK'): (today).   What could I do????
Thanks so much for your help
<?xml version="1.0" encoding="UTF-8" ?>
<MT_RM_TEST>
<BOOK>17-1627-15</BOOK>
<NAME>Ray</NAME>
</MT_RM_TEST>
-> the XML above is my simple test XML sent (book and name are mapped to the key field and other fields which could not be nulll)

Unicode issue jdbc receiver adapter

Hi guys,
I'm facing an unicode issue while trying to put some data into a MS database.
The sender system is a SAP ERP 6.0 system.
When we are trying to transfer some text in polish or korean or something else, this textes are not transferred correctly.
I already checked the SAP Note 831162 FAQ: XI 3.0 / PI 7.0 / PI 7.1 JDBC Adapter
and used the url parameter sendStringParametersAsUnicode=true
Furthermore I changed my mapping to get the sql statements, so that I add the attribute hasQuot="no"
and a leading N in front of the data string as described in the Note and in some threads in SDN
Unicode problem in JDBC receiver adapter
JDBC adapter , problem in inserting Korean Charaters in MS SQL
but nothing solved my problem.
any ideas?
Do all the languages have to be installed on the XI system?
Kind regards
Jochen

Hi Sarvesh,
thanks for helping.
Unfortunately I´m not sure what I should exactly do.
If I get you wright I have to test the mapping using the test functionality in message mapping (test tab).
I did this already
The result message looks like this
<?xml version="1.0" encoding="UTF-8"?>
<ns0:IDOC_CDB_IMPORT_insert xmlns:ns0="http://endress.com/xi/sbo/cdb">
   <ns0:StatementName1>
      <ns0:dbTableName action="insert">
         <ns0:table>CFG.DBO.IDOC_CDB_IMPORT</ns0:table>
         <ns0:access>
            <ns0:IDOC>CHRMAS</ns0:IDOC>
            <ns0:SEGMENT>E1CABTM</ns0:SEGMENT>
            <ns0:ATNAM></ns0:ATNAM>
            <ns0:SPRAS>PL</ns0:SPRAS>
            <ns0:ATBEZ hasQuot="no">N'D?ugo?? ca?kowita Tl; L:'</ns0:ATBEZ>
         </ns0:access>
      </ns0:dbTableName>
   </ns0:StatementName1>
</ns0:IDOC_CDB_IMPORT_insert>
How to proceed?
copy this message to notepad or ultra edit and then doing what?
please specify clearly.
this message will be send to the jbdc adapter and this will insert it to database.
<ns0:ATBEZ hasQuot="no">N'D?ugo?? ca?kowita Tl; L:'</ns0:ATBEZ>
will end up in a table entry like D?ugo?? ca?kowita Tl; L:
has anybody an idea how I will get the wright characters in database, when I test my UDF in eclipse, the variable during debugging has the correct text.
When output this variable via system.ou.print(text); the same issue occurs, the special characters are shown as ?.
I appreciate for your help, unfortunately my polish colleagues hustle a little bit.
kind regards
Jochen

Store procedure in JDBC Receiver adapter

Hi,
I am calling stored procedure using jdbc reeciver adapter . showing below error. In oracle database it is under functions not in the procedure. functions and stored procedure are same? is it should be create under procedure?
error message:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'GET_ALL_SALESREPINFO' (structure 'statement'): java.sql.SQLException: ORA-06550: line 1, column 7: PLS-00221: 'GET_ALL_SALESREPINFO' is not a procedure or is undefined ORA-06550: line 1, column 7: PL/SQL: Statement ignored
Sql query:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:TerritoriesAndSalesRepsRequest xmlns:ns1="http://allergan.com/TerritoriesAndSalesRepsServiceList/1.0">
<statement><GET_ALL_SALESREPINFO action="EXECUTE">
<P_REP_LOGIN isInput="1" type="VARCHAR">sdfsfd</P_REP_LOGIN>
</GET_ALL_SALESREPINFO>
</statement></ns1:TerritoriesAndSalesRepsRequest>
oracle function
DECLARE
     RETURN_VALUE BEACONDM_ETL.ACCT_TABLE_TYPE;
     P_ZIP_CODE VARCHAR2(2000) := '-';
BEGIN
     RETURN_VALUE := BEACONDM_ETL.GET_ACCT_INFO(P_ZIP_CODE);
     --DBMS_OUTPUT.PUT('RETURN_VALUE: ');
     --DBMS_OUTPUT.PUT_LINE(RETURN_VALUE);
     DBMS_OUTPUT.PUT('P_ZIP_CODE: ');
     DBMS_OUTPUT.PUT_LINE(P_ZIP_CODE);
END;
GO
DECLARE
     RETURN_VALUE BEACONDM_ETL.SALESREP_TABLE_TYPE;
     P_REP_LOGIN VARCHAR2(2000) := '-';
BEGIN
     RETURN_VALUE := BEACONDM_ETL.GET_ALL_SALESREPINFO(P_REP_LOGIN);
     --DBMS_OUTPUT.PUT('RETURN_VALUE: ');
     --DBMS_OUTPUT.PUT_LINE(RETURN_VALUE);
     DBMS_OUTPUT.PUT('P_REP_LOGIN: ');
     DBMS_OUTPUT.PUT_LINE(P_REP_LOGIN);
END;
GO
Please send me if you have any blogs for calling stored procedure using jdbc receiver adapter.

Hi Madhu,
>>>I am calling stored procedure using jdbc reeciver adapter . showing below error. In oracle database it is under functions not in the procedure. functions and stored procedure are same? is it should be create under procedure?
Of course there is difference between Oracle functions & Stored procedures:
Re: Populating DropdownByKey by accessing backend
As far as i know and have configured and used Stored procedures with the JDBC adapter, it can be used with Oracle stored procedures (leave it to the experts to comment on the Oracle functions part). So if you change it to stored procedure then it should work fine.
You may then define your Message structure as follows:
http://help.sap.com/saphelp_nw73/helpdata/en/44/7b72b2fde93673e10000000a114a6b/content.htm
And you may also like to refer the following blog on stored procedures:
PI JDBC Stored Procedure test scenario
Hope this helps. Regards, Gaurav

Jdbc receiver adapter logging in PI 7.1.1

I'm setting up an integration in PI7.1.1 with a jdbc receiver adapter. Now I want to see some output in the audit trail, but when I set the advanced parameter logSQLStatement to true nothing happens.
Does the jdbc receiver adapter in PI 7.1.1 still support this parameter?
Thanks,
Tommy

Thanks!
I checked the note and followed it but no change
Anyone else who has tried this?

JDBC Receiver Adapter: Guarnteed delivery

Hi All,
I have a JDBC receiver scenario. I was investigating the Guarnteed ( Exactly Once ) delivery option of the JDBC receiver adapter. The Following two scenarios needs to be validated
The Technical scenario is SAP R/3 --- XI -
Database
Scenario1 : The message has been triggered by SAP r/3 to XI. The Target Database then crashed. The message errors out in the Adapter engine and was not sent to the database. Would the messsage be resent again, till successful delivery. Do we need to set the Advance Mode, parameter "Number of Re-tries of database Transaction on SQL error". Or should this happen automatically from the Adapter without any setting in the adapter configuration.
Scenario2: There is a setting as Exactly Once Handling .
i have gone through the documentation on SAP help
[http://help.sap.com/erp2005_ehp_03/helpdata/EN/22/b4d13b633f7748b4d34f3191529946/frameset.htm]
But this is not very illustrative
it has 2 modes
PERSISTENCE ( values local and DB )
CONFLICT RESOLUTION ( Error or Redo )
Is this only after a post-commit system crash? Can anybody provide some more documentation, or blogs for the same.
In all we would expect that, a message Triggered from R/3 should always be delivered to the database.
please let me know know your opinions on the same.
Thanks in advance,
Best Regards
Abhishek

Would the messsage be resent again, till successful delivery
The default behaviour of adapter engine is to try sending data to receiver 3 times at an interval of 5 minutes after which the message goes into system error. You may change this behavior through visual admin. After this, you may also manually restart the message.
Do we need to set the Advance Mode, parameter "Number of Re-tries of database Transaction on SQL error"
This is not mandatory. As I mentioned above, it is handled to a certain exten automatically.
Is this only after a post-commit system crash?
The persistance factors when defined could help in error handling cases. This could also be used when a system crash occurs at the time of message processing. Then the message processing has to be done for the second time and one of the two conflict resolution methods are used.
Regards,
Prateek

JDBC receiver adapter: Insert of CLOB into Oracle DB

Hi,
I've got a short question:
Is it possible to insert CLOB fields (larger than 4kB) into an Orcale database using the JDBC receiver adapter without using a stored procedure?
We are on XI 3.0 SP20.
I had someting in mind that this is only possible with a stored procedure but I am not sure on this.
Thanks and Regards,
Helmut

HI,
Is it possible to insert CLOB fields (larger than 4kB) into an Orcale database using the JDBC receiver adapter without using a stored procedure?
yes, you can do it but it is not a best practise, but using Stored Procedure is .
Regards,
karna...

JDBC Receiver Adapter Error with SAPClassNotFoundException

HI Friends,
I have configured the JDBC Receiver Adapter with parameters as
Driver: oracle.jdbc.driver.OracleDriver
Connection: jdbc:oracle:thin:@10.15.96.29:1525:RMOSDB
XI 700, Oracle DB 10.2
I have installed JDBC driver for Oracle as guide How Install and Configure External Drivers for the JDBC & JMS Adapters.pdf. I can see file ojdbc14.jar at D:\usr\sap\<SID>\DVEBMGSNN\j2ee\cluster\server0\bin\ext\com.sap.aii.af.jmsproviderlib.
But Im still getting an error SAPClassNotFoundException as following:
#XI AF com.sap.aii.adapter.jdbc.XI2JDBC@1497c21##0#0#Error#1#com.sap.aii.adapter.jdbc.XI2JDBC#Plain###Accessing database connection 'jdbc:oracle:thin:@10.15.96.29:1525:RMOSDB' failed: com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:oracle:thin:@10.15.96.29:1525:RMOSDB': SAPClassNotFoundException: oracle.jdbc.driver.Oracledriver#
#XI AF com.sap.aii.adapter.jdbc.XI2JDBC@1497c21##0#0#Error#1#com.sap.aii.adapter.jdbc.XI2JDBC#Plain###JDBC_ERR_207#
#Error#1#com.sap.aii.adapter.jdbc.XI2JDBC#Plain###Accessing database connection 'jdbc:oracle:thin:@10.15.96.29:1525:RMOSDB' failed: com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:oracle:thin:@10.15.96.29:1525:RMOSDB': SAPClassNotFoundException: oracle.jdbc.driver.Oracledriver#
I tried to install JDBC driver again but it was not solve this problem.
Please suggest!
Regards,
Cuong

HI Cuong,
It seems something wrong with the installation of JDBC driver or in the config parameters for Adapter.
Not sure if driver is case sensitive.
But from the log it shows "oracle.jdbc.driver.Oracledriver".
Try putting "oracle.jdbc.driver.OracleDriver".
regards,
Pinkle

How many messsages can we insert using JDBC receiver adapter in to DB

Hi Friends,
We are having 30 JDBC receiver interfaces in my current implementation project; load of JDBC receiver interfaces was 50 k messages per day and Performing only INSERT operation on data base.
We have created individual communication channel for every JDBC receiver interface and max concurrency value set in CC was 5.
Now we are testing all interfaces in quality with all possible cases, but we found that JDBC receiver adapter unable to process 50 k messages per day, we are on PI 7.1 EHP1 SP7.
Please share your experiences with JDBC adapter receiver like per day how many messages we can transfer.
Thanks a Ton,
Raj

Raja Sekhar Reddy T wrote:
we are processing 50 k individual messages.
>
> I have increased max threads for JDBC receiver to 20 but no luck same rate only . My questions here is how many messages we can trasfer using JDBC receiver adapter?
>
> Regards,
> Raj
Hi raj,
I have seen some interfaces that deal with upload of 5000 rows at a rime.. I don't there will be a restriction in the no of messages that can be transferred using the JDBC adapter as such unless until the requirement is so para-normal and in your case it is not
Kind regards
XA

JDBC Receiver adapter not reaching timeout

Similar Messages

Maybe you are looking for