JDBC- RFC - JDBC How to send result set to rfc ?

Hi Friends ,
                    I am working on scenario like .
          <b>          I have to read data from a sql server using select statement and send same   data to r3 ( using RFC we are inserting the same as a copy ) .
                    Then i have have get confirmation from R3 as data inserted succesfully - Flag .Then we have to come back to same table and update one field flag as 'U'.</b>
                  For this I am using JDBC Sender Adapter and RFC Receiver Adapter .Will i use as Synchronous Interface ?
                  I think i have to use JDBC Receiver Adapter    also to Complete the cycle .
                  Can you please clarify the following....
                   1. how is that whole selected data will send to R3 . If i use Select statement in JDBC Sender Adapter it will as resultset .It will contain Multiple Rows right ? Our RFC Will accept the parameter as string .
                    2. If we use the synchronous Interface will it send row by row from the result send Then get back the result from R3 and come back again to JDBC ( Database ) and update the required field ?
                    3. In JDBC Sender Adapter , the Update Parameter doing the Updation Part prior to get the status from R3. How to handle this ?
                   4. Do i need to configur teh separate JDBC Receiver adpater for this updation part ? Then We cann't use Synchronous Interface right ?
                 5 . Will JDCB Sender Adapter get the result set (by select statement ) and send to r3 as row by row and get the confirmation message as inserted ?
Best Regards .,
V.Rangarajan

Hi Udo ,
               Thanks for your reply . If i have used the synchronnous RFC Calls , that RFC will return the flag as 'Y' or 'N' , for Either succesfully inserted or Not successful .
                  In this synchronous how can i use the JDBC Receiver adapter ?
                 If 'Y' or 'N' I have to update the<b> same table ,same row</b> which have sent to RFC . My doubt , we are wrirtng the SQL select query as " <b>select * from table name where UpdateStatus is null</b> " .
                 So it will return multiple rows right ?   I have to uses the synchronous response form RFC to update the row of the same table using JDBC Adapter right ?
               Can you please explain me little bit more ? I am new to xi .
Best Regards .,
V.Rangarajan

Similar Messages

How to display result set boolean value as a check box

Hi guys,
I am getting the data which include boolean from the database, i need to display the boolean values as check box, see my code, its displaying the data into the table with the boolean values as true and false, how to make it in check boxes
package swing2.org;
import java.awt.GridBagLayout;
import javax.swing.JPanel;
import java.awt.Color;
import javax.swing.BorderFactory;
import javax.swing.border.BevelBorder;
import javax.swing.table.AbstractTableModel;
import javax.swing.JFrame;
import javax.swing.JScrollPane;
import javax.swing.JTable;
import java.awt.Container;
import java.awt.GridBagConstraints;
import java.awt.ComponentOrientation;
import java.awt.event.WindowAdapter;
import java.awt.event.WindowEvent;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.ResultSet;
import java.sql.ResultSetMetaData;
import java.sql.SQLException;
import java.sql.Statement;
import java.util.ArrayList;
public class Panel2 extends JPanel {
     private static final long serialVersionUID = 1L;
     private JScrollPane jScrollPane = null;
     private JTable jTable = null;
      * This is the default constructor
     public Panel2() {
          super();
          initialize();
      * This method initializes this
      * @return void
     private void initialize() {
     //     Panel2.ResultSetFrame();
          GridBagConstraints gridBagConstraints = new GridBagConstraints();
          gridBagConstraints.fill = GridBagConstraints.BOTH;
          gridBagConstraints.gridy = 0;
          gridBagConstraints.weightx = 1.0;
          gridBagConstraints.weighty = 1.0;
          gridBagConstraints.gridx = 0;
          this.setSize(340, 200);
          this.setLayout(new GridBagLayout());
          this.setBackground(new Color(171, 211, 224));
          this.setBorder(BorderFactory.createCompoundBorder(BorderFactory.createBevelBorder(BevelBorder.RAISED), null));
          this.add(getJScrollPane(), gridBagConstraints);
      * This method initializes jScrollPane
      * @return javax.swing.JScrollPane
     private JScrollPane getJScrollPane() {
          if (jScrollPane == null) {
               jScrollPane = new JScrollPane();
               jScrollPane.setViewportView(getJTable());
          return jScrollPane;
      String[] columnNames = {"Task Description",
             "Time ",
             "Pop-up",
             "Sound",
             "Delete"};
      * This method initializes jTable
      * @return javax.swing.JTable
     private JTable getJTable() {
                  ResultSetFrame oo = new ResultSetFrame();
                  JTable table = new JTable(oo.model);
                  table.setBackground(new Color(195, 217, 230));
                  table.setComponentOrientation(ComponentOrientation.UNKNOWN);
                  table.setShowGrid(true);
                  table.setShowVerticalLines(true);
                  table.setRowHeight(17);
                  table.setShowHorizontalLines(true);
                  return table;
abstract class ResultSetTableModel extends AbstractTableModel
     public ResultSetTableModel(ResultSet aResultSet)
          rs = aResultSet;
      try
           rsmd = rs.getMetaData();
      catch(SQLException e)
           System.out.println("Error " + e);
   public String getColumnName(int c)
   { try
      { return rsmd.getColumnName(c + 1);
      catch(SQLException e)
      { System.out.println("Error " + e);
         return "";
   public int getColumnCount()
   { try
      { return rsmd.getColumnCount();
      catch(SQLException e)
      { System.out.println("Error " + e);
         return 0;
   protected ResultSet getResultSet()
   { return rs;
   private ResultSet rs;
   private ResultSetMetaData rsmd;
class CachingResultSetTableModel extends ResultSetTableModel
{ public CachingResultSetTableModel(ResultSet aResultSet)
   { super(aResultSet);
      try
      { cache = new ArrayList();
         int cols = getColumnCount();
         ResultSet rs = getResultSet();
         /* place all data in an array list of Object[] arrays
            We don't use an Object[][] because we don't know
            how many rows are in the result set
         while (rs.next())
         { Object[] row = new Object[cols];
            for (int j = 0; j < row.length; j++)
               row[j] = rs.getObject(j + 1);
            cache.add(row);
      catch(SQLException e)
      { System.out.println("Error " + e);
   public Object getValueAt(int r, int c)
   { if (r < cache.size())
         return ((Object[])cache.get(r))[c];
      else
         return null;
   public int getRowCount()
   { return cache.size();
   private ArrayList cache;
class ResultSetFrame
{ public ResultSetFrame()
      /* find all tables in the database and add them to
         a combo box
      try
      { Class.forName("com.mysql.jdbc.Driver");
         con = DriverManager.getConnection("jdbc:mysql://localhost:3306/task","root","nbuser");
            stmt = con.prepareStatement("SELECT * FROM tasky");
               try
                String query = "SELECT * FROM tasky";
                rs = stmt.executeQuery(query);
                model = new CachingResultSetTableModel(rs);
                JTable table = new JTable(model);
                scrollPane = new JScrollPane(table);
            catch(SQLException e)
                 System.out.println("Error " + e);
      catch(ClassNotFoundException e)
      { System.out.println("Error " + e);
      catch(SQLException e)
      { System.out.println("Error " + e);
   private JScrollPane scrollPane;
   public ResultSetTableModel model;
   private ResultSet rs;
   private Connection con;
   private Statement stmt;
}

add a
public Class getColumnClass(int col) {
     return getValueAt(0, col).getClass();
}in your ResultSetTableModel which extends AbstractTableModel.
A simple example
import javax.swing.JFrame;
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.SwingUtilities;
import javax.swing.table.AbstractTableModel;
public class SimpleDemo extends JFrame {
    public SimpleDemo() {
        createAndShowUI();
    private void createAndShowUI(){
        String[] columnName = {"CheckBox Column", "Data Column"};
        Object[][] data = {{new Boolean(true), "Data 1"},
        {new Boolean(false), "Data 2"}, {new Boolean(true), "Data 3"}};
        MyModel model = new MyModel();
        model.setData(columnName, data);
        JTable myTable = new JTable(model);
        JScrollPane scrollPane = new JScrollPane(myTable);
        setDefaultCloseOperation(EXIT_ON_CLOSE);
        getContentPane().add(scrollPane);
        pack();
        setLocationRelativeTo(null);
    class MyModel extends AbstractTableModel {
        String[] columnName;
        Object[][] data;
        public void setData(String[] colName, Object[][] theData) {
            this.columnName = colName;
            this.data = theData;
            fireTableStructureChanged();
        public String getColumnName(int column) {
            return columnName[column];
        public Object getValueAt(int rowIndex, int columnIndex) {
            return data[rowIndex][columnIndex];
        public int getRowCount() {
            return data.length;
        public int getColumnCount() {
            return columnName.length;
        public Class getColumnClass(int c) {
            return getValueAt(0, c).getClass();
    public static void main(String[] args){
        Runnable run = new Runnable(){
            public void run(){
                new SimpleDemo().setVisible(true);
        SwingUtilities.invokeLater(run);
}

How to send results to actionscript using java

Hi,
I do RPC using HttpService.
In my situation, I need to send results from Java code to
Flex Action script. I have defined a Java Servlet receiving data
from Flex application, then it processes with the data, finally the
Servlet is supposed to send some feedbacks to the client(Flex).
My question is that how can I define codes in doPost() method
that the following function will get "result" from the Java side.
public static function httpResult(event:ResultEvent):void
var result:Object = event.result;
//Do something with the result.
if (result.toString() == "success")
resultMessage.text = "Login Success";
resultMessage.text = "Invalid User";
}

Hi,
Try this: If you are sending a simple text as "sucess" or
"error" after doing some process in the servlet..
set your content type to "text/plain" and simply
println(<data to be sent>);
In the flex application, get the result text that the servlet
send using:
resultString = String(httpUrl.lastResult);
where httpUrl is the id of the HTTPService. Now you can
compare what the servlet send by:
if(resultString=="sucess") {
Hope this solves your problem :)
Regards,
-- Abdel Olakara
http://olakara.googlepages.com
http://technopaper.blogspot.com

How to send results to actionscript using java via HttpService

Hi,
I do RPC using HttpService.
In my situation, I need to send results from Java code to
Flex Action script. I have defined a Java Servlet receiving data
from Flex application, then it processes with the data, finally the
Servlet is supposed to send some feedbacks to the client(Flex).
My question is that how can I define codes in doPost() method
that the following function will get "result" from the Java side.
public static function httpResult(event:ResultEvent):void
var result:Object = event.result;
//Do something with the result.
if (result.toString() == "success")
resultMessage.text = "Login Success";
resultMessage.text = "Invalid User";
}

I advise having your servlet build an xml string, maybe put a
status attribute in the root tag, like this:
<myroot status="success">
<mytext>Some text</mytext>
</myroot>
and return that to the calling Flex client. XML is easier to
work with than Object. On the HTTPService tag, set
resultFormat="e4x", and it will return plain XML.
then in the handler, do:
var xmlResult:XML = XML(event.result); //this will already be
the myroot node
//Do something with the result.
if (xmlResult.@status== "success") //reads the status
attribute
resultMessage.text = xmlResult.mytext.text(); //get the
value of themytext text() node
resultMessage.text = "Error";
Tracy

How to group result set to count values in several (2) attributes?

Hi there,
the (simplified) query at the bottom returns the following result set:
OBJ_ID Attr 1 Attr2
22674886 HAK44221 GEB132542
22674886 HAK44221 GEB92751
22674886     HAK44222 GEB92744
22674886     HAK17113 null
However, we need the number of different Attr 1 and Attr2 counted, which should result in the this:
OBJ_ID Attr 1 Attr2
22674886 3 3
We trried using "group by grouping sets", "group by" and also took a glance at "cube" but didn't manage to get the desired result, mainly due to the fact, that Attr2 may contain null values.
We managed to find a solution using a GTT or a view. Can anybody give a hint how to solve that without using temporary tables?
Best regards
Pat
SELECT
o.obj_id,
o2.obj_name as Attr1,
g.ckw_nis_nummer as Attr2
FROM objekte o
JOIN eigenschaftsdaten d0
ON (o.obj_id = d0.obj_id AND d0.eig_id = 2525755)
LEFT JOIN eigenschaftsdaten d8
ON (d0.egd_wert=substr(d8.egd_wert,1,instr(d8.egd_wert, ' ')-1) and d8.eig_id=2525976)
LEFT JOIN objekte o2
ON o2.obj_id=d8.obj_id
LEFT join gebaeude g
ON o2.obj_id=g.parent_house_service

Hi,
That looks like COUNT (DISTINCT ...):
SELECT       o.obj_id
,       COUNT (DISTINCT o.obj_name)          AS attr1
,       COUNT (DISTINCT g.ckw_nis_nummer)     AS attr2
FROM        objekte o
JOIN        eigenschaftsdaten     d0     ON   o.obj_id      = d0.obj_id
                           AND d0.eig_id       = 2525755
LEFT JOIN eigenschaftsdaten      d8     ON   d0.egd_wert = SUBSTR ( d8.egd_wert
                                                         , 1
                                          , INSTR (d8.egd_wert, ' ') - 1
                         and d8.eig_id=2525976)
LEFT JOIN objekte          o2     ON o2.obj_id      = d8.obj_id
LEFT JOIN gebaeude           g     ON o2.obj_id      = g.parent_house_service
Depending on your data and your requirements, you may need to join some of the tables separatemly, do a GROUP BY to get attr2, and then join those results to the other tables.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data. WSimplify the problem as much as possible. For exam[ple, if your real problem involves 5 tables, but the part you don't understand can be shown with only 1 or 2 tables, then post sample data and results for those 1 or 2 tables only.
Point out where the query above is getting the wrong results, and explain, using specific examples, how you get those results from the sample data in those places.
Always say what version of Oracle you're using.
See the forum FAQ {message:id=9360002}

How to determine how many times result set columns have same value

Hi -
I'm doing a report which will be used for payment trend analyses.
My initial result set looks like this:
HOUSEHOLD_ID     JAN_PMT     FEB_PMT     MAR_PMT     APR_PMT     MAY_PMT     JUN_PMT     JUL_PMT     AUG_PMT     SEP_PMT     OCT_PMT     NOV_PMT     DEC_PMT
90026845409     1     1     1     1     2     1     1     1     1     0     1     0(many rows, of course; result set pivoted)
I need to determine the households that have a > 0 value in three or more consecutive months.
I'm hoping someone will have some suggestions because the only solutions I'm coming up with right now would be a coding nightmare (lots of "OR's"), and I'm assuming (hoping) there's a better solution out there.
Thanks!
Christine

Hi Frank,
I'm not sure I'm understanding how I would use those analytic functions. Here is my select statement:
SELECT HOUSEHOLD_ID,
       SUM(CASE WHEN ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM'))     = 1 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) > 19 ) OR
                     ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM')) - 1 = 1 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) < 6 )
                THEN 1 ELSE 0 END) AS JAN_PMT,
       SUM(CASE WHEN ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM'))     = 2 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) > 19 ) OR
                     ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM')) - 1 = 2 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) < 6 )
                THEN 1 ELSE 0 END) AS FEB_PMT,
       SUM(CASE WHEN ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM'))     = 3 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) > 19 ) OR
                     ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM')) - 1 = 3 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) < 6 )
                THEN 1 ELSE 0 END) AS MAR_PMT,
       SUM(CASE WHEN ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM'))     = 4 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) > 19 ) OR
                     ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM')) - 1 = 4 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) < 6 )
                THEN 1 ELSE 0 END) AS APR_PMT,
       SUM(CASE WHEN ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM'))     = 5 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) > 19 ) OR
                     ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM')) - 1 = 5 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) < 6 )
                THEN 1 ELSE 0 END) AS MAY_PMT,
       SUM(CASE WHEN ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM'))     = 6 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) > 19 ) OR
                     ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM')) - 1 = 6 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) < 6 )
                THEN 1 ELSE 0 END) AS JUN_PMT,
       SUM(CASE WHEN ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM'))     = 7 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) > 19 ) OR
                     ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM')) - 1 = 7 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) < 6 )
                THEN 1 ELSE 0 END) AS JUL_PMT,
       SUM(CASE WHEN ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM'))     = 8 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) > 19 ) OR
                     ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM')) - 1 = 8 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) < 6 )
                THEN 1 ELSE 0 END) AS AUG_PMT,
       SUM(CASE WHEN ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM'))     = 9 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) > 19 ) OR
                     ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM')) - 1 = 9 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) < 6 )
                THEN 1 ELSE 0 END) AS SEP_PMT,
       SUM(CASE WHEN ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM'))     = 10 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) > 19 ) OR
                     ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM')) - 1 = 10 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) < 6 )
                THEN 1 ELSE 0 END) AS OCT_PMT,
       SUM(CASE WHEN ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM'))     = 11 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) > 19 ) OR
                     ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM')) - 1 = 11 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) < 6 )
                THEN 1 ELSE 0 END) AS NOV_PMT,
       SUM(CASE WHEN ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM'))     = 12 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) > 19 ) OR
                     ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM')) - 1 = 12 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) < 6 )
                THEN 1 ELSE 0 END) AS DEC_PMT
FROM MONETARY_TRANS
WHERE MONETARY_TRANS_TYPE_ID    = 1                             --payment
--TESTING
AND HOUSEHOLD_ID = 90026845409
   AND RESPONSIBLE_PARTY_TYPE_ID = 1                             --household
   AND RECEIVED_DATE > '01-JAN-2008'
   AND ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) < 6
    OR   TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) > 19 )
   AND PREMIUM_AMOUNT            > 0
   AND BILLING_TRANS_TYPE_ID     = 6
   AND MONETARY_TRANS_TYPE_ID    = 1
   AND RESPONSIBLE_PARTY_TYPE_ID = 1
GROUP BY HOUSEHOLD_IDAnd from this I get the results originally posted. From there I need to figure out the households that have values greater than 0 for three or more consecutive months.
Thanks for your help........
-Christine

How to send result of a report as an email

hi experts,
how to send the result of a report as an email to the user.
plz help
regards,
malleswari.

Hi,
Check this Weblog:
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
Check these link as well..
http://www.sap-img.com/abap/sending-email-with-attachment.htm
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
I did a search in the forum, an di found lot of threads to send mail from ALV ....
Look at the below threads
How to send ALV list report as html attachment in a mail??
https://www.sdn.sap.com/irj/sdn/forumsearch
How to send ALV report by mail
Re: How to send an ALV Grid Report to SAP user mail ?
Re: How to send an ALV Grid Report to SAP user mail ?
Have a look at below code:
REPORT ZSENDEXTERNAL.
DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
DATA: OBJHEAD LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.
DATA: OBJBIN LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: OBJTXT LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: TAB_LINES LIKE SY-TABIX.
Creation of the document to be sent
File Name
DOC_CHNG-OBJ_NAME = 'SENDFILE'.
Mail Subject
DOC_CHNG-OBJ_DESCR = 'Send External Mail'.
Mail Contents
OBJTXT = 'Minimum bid : $250000'.
APPEND OBJTXT.
OBJTXT = 'A representation of the pictures up for auction'.
APPEND OBJTXT.
OBJTXT = 'was included as attachment.'.
APPEND OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
Creation of the entry for the compressed document
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
Creation of the document attachment
(Assume that the data in OBJBIN is in BMP format)
*OBJBIN = ' O/ '. APPEND OBJBIN.
*OBJBIN = ' | '. APPEND OBJBIN.
*OBJBIN = ' / '. APPEND OBJBIN.
*DESCRIBE TABLE OBJBIN LINES TAB_LINES.
*OBJHEAD = 'PICTURE.BMP'.
*APPEND OBJHEAD.
Creation of the entry for the compressed attachment
*OBJPACK-TRANSF_BIN = 'X'.
*OBJPACK-HEAD_START = 1.
*OBJPACK-HEAD_NUM = 1.
*OBJPACK-BODY_START = 1.
*OBJPACK-BODY_NUM = TAB_LINES.
*OBJPACK-DOC_TYPE = 'BMP'.
*OBJPACK-OBJ_NAME = 'PICTURE'.
*OBJPACK-OBJ_DESCR = 'Representation of object 138'.
*OBJPACK-DOC_SIZE = TAB_LINES * 255.
*APPEND OBJPACK.
Completing the recipient list
RECLIST-RECEIVER = '[email protected]'.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
*RECLIST-RECEIVER = 'SAPUSERNAME'.
*RECLIST-REC_TYPE = 'P'.
*APPEND RECLIST.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = DOC_CHNG
PUT_IN_OUTBOX = 'X'
TABLES
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = OBJBIN
CONTENTS_TXT = OBJTXT
RECEIVERS = RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
OPERATION_NO_AUTHORIZATION = 4
OTHERS = 99.
CASE SY-SUBRC.
WHEN 0.
WRITE: / 'Result of the send process:'.
LOOP AT RECLIST.
WRITE: / RECLIST-RECEIVER(48), ':'.
IF RECLIST-RETRN_CODE = 0.
WRITE 'The document was sent'.
ELSE.
WRITE 'The document could not be sent'.
ENDIF.
ENDLOOP.
WHEN 1.
WRITE: / 'No authorization for sending to the specified number',
'of recipients'.
WHEN 2.
WRITE: / 'Document could not be sent to any recipient'.
WHEN 4.
WRITE: / 'No send authorization'.
WHEN OTHERS.
WRITE: / 'Error occurred while sending'.
ENDCASE.
Reward points if this helps.
Manish
Message was edited by:
Manish Kumar
Message was edited by:
Manish Kumar

How to send results from Captivate 7 to PHP?

Hello!
I need to send quiz results to PHP server. In Captivate 5 i did it with settings reporting by e-mail, than parcer data and send results to PHP server.
In Captivate 7 this settings unevalible.
How to do it now?
I have tryed some cases:
1. Use settings Internal Server - but it show dialog box where user have to put his name and e-mail. I dony need it! My script knows who try to pass quiz.
2. I try to use this code :
<script type="text/javascript">
document.getElementById('Captivate').focus();
document.Captivate.focus();
function getData(){
var cp = document.Captivate;
cp.cpEIGetValue("m_VarHandle");
</script>
<a onclick="getData();" href="#" > get data</a>
But it generate erorr Uncaught TypeError: undefined is not a function
on line cp.cpEIGetValue("m_VarHandle");
What can i do ?

var cp = document.Captivate;
alert (cp);
alert(document.Captivate.cpEIGetValue("m_VarHandle.cpQuizInfoTotalCorrectAnswers"));
first alert work ok
second gives the same error Uncaught TypeError: undefined is not a function ((

How to display results set of multiple reports into a single report table

Our goal is to create a single report (or dashboard) that shows the "funnel" of object creations related to each campaign. The flow goes from Activity to Lead to Opportunity as well as multiple steps within each (ie. Unqualified Lead -> Qualified Lead, etc).
We currently have 3 separate reports in three different subject areas, each reporting the different metrics and we would like to combine the output into a single Unified report.
For example what we currently have is:
Activities:
Campaign Name # of Activities
Campaign A 12
Campaign B 26
Leads:
Campaign Name # of Leads # of Qualified Leads
Campaign A 10 4
Campaign B 20 18
Opportunities:
Campaign Name # of Opportunities # of Opps per Sales Stage ... # of Wins Closed Revenue
Campaign A 3 2 1 $1,000.00
Campaign B 10 8 3 $2,800.00
What we want to see is:
Combined:
Campaign Name - Campaign Cost - # of Activities - # of Leads - # of Qualified Leads - # of Opportunities - # of Opps per Sales Stage - # of Wins - Closed Revenue
Campaign A - $423.00 - 12 - 10 - 4 - 3 - 2 - 1 - $1,000.00
Campaign B - $ 1,000.00 - 26 - 20 - 18 - 10 - 8 - 3 - $2,800.00
We have tried using the "Combine with similar analysis" but the number of columns for each subject area differ. We also tried creating multiple UNION criteria (one for each column), but in the case of # of Opps per Sales Stage and Closed Revenue, those are not "Metrics" fields, so they won't combine.

Hi, You may have to create some dummy fields to equate the no. of field in each of the report matching the data type too and get a one single report using combined analytics and then using the resultant data you can create a simple pivot like below. Haven't tried it before
-- Venky CRMIT
Hi Venky,
I am facing the same problem. Can you please say Steps how to create resultant data and Combine in pivot Table .
Please Help me .
Thanks in Advance .
My mail id is :
[email protected]

How to export result set from mysql query browser to .sql in oracle

Hi folks:
I was trying to export result set from MySql query browser to Oracle. I could able to do
File->Export Result Set-> Excel format...
What I am trying to get is .sql file so that I can run it as a script in my oracle db. Is there any way we can get .sql file with inserts and delimeters ....?
Did you guys get my question.?
Please throw some light on this....
Could be very appreciable ....
Thanks
Sudhir Naidu

Hi
Create a sql statement which generates the insert statements.
Something like this:
select 'insert into table1 (column1, column2, column3) values (' ||
column1 || ', ' || column2 || ', ' || column3 || ');' from table 1;
The || sign is the string concatenation sign in Oracle, replace it the appropriate sign in MySql. Export the result set of this query into a file, and you can run it in a SqlPlus.
Ott Karesz
http://www.trendo-kft.hu

How to highlight result set data on world map

Hi,
I want to show the graphical representation of world map to highlight the countries which having the maximum booking of hotels of our client xyz.
All the values are coming from the mysql db .
I want the library which will draw the world map on the Jpanel for the respective result set
Plz help me for this .
I generally use the JFreeChart for drawing the other graphs but the Jfreechart don't have the library for the World Map or Destination Graph etc.
Hint: ( Google Analytic's map is the best example )
Thanks In Advanced
Mahesh

This isn't what you want, but it will get you on the right track. I chose the most complex image I could find so give it a few seconds to read the image and build the paths. The parser is catered to the image I chose, but in general you can probably expect the "path" element to delineate the boundaries for any map svg. The particular image I chose grouped the paths with country ID so I added a little mouse interaction to the GUI. Forgive me for any dumbly coded stuff. I didn't put much effort into streamlining it.
import org.xml.sax.*;
import java.awt.*;
import javax.swing.*;
import javax.xml.parsers.SAXParser;
import javax.xml.parsers.SAXParserFactory;
import org.xml.sax.helpers.DefaultHandler;
import java.awt.geom.Path2D;
import java.util.StringTokenizer;
import java.net.URL;
public class WorldMapTest {
    public static void main(String[] args) throws Exception {
        SAXParserFactory factory = SAXParserFactory.newInstance();
        SAXParser saxParser = factory.newSAXParser();
        SimpletonPathExtractor handler = new SimpletonPathExtractor();
        saxParser.parse(new URL("http://upload.wikimedia.org/wikipedia/commons/b/b7/World98.svg").openStream(), handler);
        createAndShowGUI(handler.locations);
    public static void createAndShowGUI(final java.util.List<Location> locations) {
        JFrame frame = new JFrame();
        JPanel p = new JPanel() {
            @Override
            public Color getBackground() {
                return Color.white;
            public void paintComponent(java.awt.Graphics g) {
                super.paintComponent(g);
                Graphics2D g2 = (Graphics2D) g;
                g2.scale(getWidth() / 8000.0, getHeight() / 3859.0);
                g2.setColor(Color.black);
                Point p = getMousePosition();
                if(p != null) {
                    p.x = (int) (p.x * 8000/getWidth());
                    p.y = (int) (p.y * 3859/getHeight());
                String placeID = null;
                for (Location loc : locations) {
                    if(p != null && placeID == null && loc.boundry.contains(p)){
                        g2.setColor(Color.LIGHT_GRAY);
                        g2.fill(loc.boundry);
                        placeID = loc.id == null?"Unkown":loc.id;
                        g2.setColor(Color.black);
                    g2.draw(loc.boundry);
                if (placeID != null) {
                    g2.setColor(Color.green.darker());
                    Font f = g2.getFont();
                    f = f.deriveFont(Font.BOLD,(f.getSize() * 8000f / getWidth()));
                    g2.setFont(f);
                    g2.drawString(placeID, p.x, p.y);
            public java.awt.Dimension getPreferredSize() {
                return new Dimension(1000,482);
        p.addMouseMotionListener(new java.awt.event.MouseAdapter() {
            @Override
            public void mouseMoved(java.awt.event.MouseEvent e) {
                ((JComponent) e.getSource()).repaint();
        frame.setContentPane(new JScrollPane(p));
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.pack();
        frame.setVisible(true);
    public static class SimpletonPathExtractor extends DefaultHandler {
        java.util.List<Location> locations = new java.util.ArrayList<>();
        String recentID;
        @Override
        public void startElement(String uri, String localName, String qName, Attributes attr) throws SAXException {
            if("g".equals(qName)) {
                recentID = attr.getValue("id");
            if ("path".equals(qName)) {
                int length = attr.getLength();
                for (int i = 0; i < length; i++) {
                    String attrN = attr.getQName(i);
                    String val = attr.getValue(attrN);
                    if ("d".equals(attrN)) { //path data
                        Path2D path = new Path2D.Double();
                        //assume simple polygonal path
                        StringTokenizer tk = new StringTokenizer(val, "MLzZ ");
                        try {
                            path.moveTo(Double.parseDouble(tk.nextToken()),
                                        Double.parseDouble(tk.nextToken()));
                            while (tk.hasMoreTokens()) {
                                path.lineTo(Double.parseDouble(tk.nextToken()),
                                            Double.parseDouble(tk.nextToken()));
                            path.closePath();
                        } catch (Exception e) {
                            throw new Error("I'm a simple parser. I can only do "
                                    + "'LineTo' paths!", e);
                        locations.add(new Location(path,recentID));;
        public void endElement(String uri, String localName, String qName) throws SAXException {
            if("g".equals(qName)) {
                recentID = null;
    public static class Location {
        Path2D boundry;
        String id;
        public Location(Path2D boundry, String id) {
            this.boundry = boundry; this.id = id;
}

How dynamically genrate result set in OBIEE 11.

I have variable in OBIEE 11 dashboard report that contains a comma separated string
represented by Fact table columns as below are 3 columns of Fact table Unique Clicks, No of Prospects,
and Email Sent Count
Var = “Fact”.”Unique Clicks”,”Fact”.”No of Prospects”,”Fact”.”Email Sent Count”
Now I want to separate these columns and generate columns of result set in OBIEE 11 dashboard report
In other word dynamically generate result set columns.
Can I do through java script, changes in analysis XML shown in Advanced tab etc any syggestion.

Hi Radha,
If you want to cache the results in the Oracle BI Server, you should check that option. When you run a query the Oracle BI Server will get its results from the cache, based on the persistence time you define. If the cache is expired, the Oracle BI Server will go to the database to get the results.
If you want to use caching, you should enable caching in the nqsconfig.ini file.
Cheers,
Daan Bakboord

How to get result set

Hi all,
Please tell me how to get the below required out put.
this is my table and data
with t as (select 11 plcy,1 nm from dual union all
select 11 plcy,2 nm from dual union all
select 11 plcy,3 nm from dual union all
select 11 plcy,5 nm from dual union all
select 22 plcy,1 nm from dual union all
select 22 plcy,2 nm from dual union all
select 22 plcy,3 nm from dual union all
select 33 plcy,1 nm from dual union all
select 44 plcy,2 nm from dual union all
select 55 plcy,4 nm from dual union all
select 66 plcy,3 nm from dual )
select * from t
this my required output.
from above query required output is below
plcy      nm
11      5
33      1
44      2
55      4
66      3
if pass nm = 5 then 11
if i pass nm= 1 then 33
if i pass nm=2 then 44
if pass nm = 4 then 55
if i pass nm =3 thne 66
it means it has only one value from plcy
11 5
33 1
44 2
55 4
66 3
thanks,

Something like this:
SQL > with t as (select 11 plcy,1 nm from dual union all
2             select 11 plcy,2 nm from dual union all
3             select 11 plcy,3 nm from dual union all
4             select 11 plcy,5 nm from dual union all
5             select 22 plcy,1 nm from dual union all
6             select 22 plcy,2 nm from dual union all
7             select 22 plcy,3 nm from dual union all
8             select 33 plcy,1 nm from dual union all
9             select 44 plcy,2 nm from dual union all
10             select 55 plcy,4 nm from dual union all
11             select 66 plcy,3 nm from dual
12 )
13 SELECT     MAX(plcy) plcy
14 , NM
15 FROM       t
16 GROUP BY NM
17 ORDER BY PLCY
18 /
      PLCY         NM
        11          5
        33          1
        44          2
        55          4
        66          3

How to send/set parameter from BSP page to iview

Dear Expert,
Can advise me how to send or set parameter from BSP page to iview ?
http://xxx.xxx.com/irj/portal?navigationtarget=roles://pcd:portal_content/FLD.ObjetLibrary/FLD.Iviews/FLD.CRM/ET/bsppage.htm?lv_param=xxx
I want to view my bsp page in portal but with parameter value.
I can open my bsp page without parameter value like link below :
http://xxx.xxx.com/irj/portal?navigationtarget=roles://pcd:portal_content/FLD.ObjetLibrary/FLD.Iviews/FLD.CRM/ET/
Thnx & Regards,
Pieter

Hi,
your BSP page get's integrated via an iFrame. So, simply speaking, it's not possible to pass an parameter back.
But what you can try is to use the Portal DataBag component. In the BSP page, store the information you want to pass in the browser. The iView/Portal than has to check if there is a new parameter / value stored.
SAP Help: http://help.sap.com/saphelp_nw70/helpdata/en/68/322a9261c54e51b7965f86aac3dae2/frameset.htm
br,
Tobias

Avoid JDBC sender error: Execute statement did not return a result set

Hi!
My JDBC sender adapter towards MS SQL server works fine, with an Execute statement calling a stored procedure that returns the source data needed. The stored procedure itself updates the status of database table records, so that only the unread records are returned each time the stored procedure is called.
However, the communication channel monitoring sets a red flag for the JDBC sender adapter, when there are no values to fetch from the database table (using the stored procedure). Message says: "Database-level error reported by JDBC driver while executing statement 'EXECUTE FetchMessage 1, 9000'. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.'. For details, contact your database server vendor."
This is not an error situation, as I do not expect there to be any values to fetch from the database at all times.
I do not see how to change the stored procedure to avoid this error.
Is there a parameter to be set on the JDBC adapter that I can use, so the red flag is avoided?
Thanks for any input!
Regards,
Oeystein Emhjellen

Hi Oeystein Emhjellen.
The problem is Store Procedure that has to generate always a ResultSet (or cursor). If it doesn't have a output, you have to generate an Empty ResultSet.
Like a SELECT Statement:
If there are data, SELECT get an output result but if it get nothing the SELECT Statement get a empty ResultSet.
Ask to your database team.
I hope it helps you.
Bruno.

JDBC- RFC - JDBC How to send result set to rfc ?

Similar Messages

Maybe you are looking for